aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorBartosz Golaszewski <brgl@bgdev.pl>2017-12-18 18:16:46 +0100
committerBartosz Golaszewski <brgl@bgdev.pl>2018-01-01 19:40:49 +0100
commitec3c2d518b163dd2be48ac1fee8d7f1686cd769f (patch)
tree30547bd56ca22c329c96c361532e576adaa74c41
parentaa4ce22897e159ec7ecf396c199ba0edcef886c3 (diff)
eeprom: at24: use a common prefix for all symbols in at24.c
There are a couple symbols defined in the driver source file which are missing the at24_ prefix. This patch fixes that. For module params: use module_param_named() in order to not break userspace. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
-rw-r--r--drivers/misc/eeprom/at24.c34
1 files changed, 18 insertions, 16 deletions
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index b30db99cd951..657074ec0e64 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -93,17 +93,17 @@ struct at24_data {
*
* This value is forced to be a power of two so that writes align on pages.
*/
-static unsigned int io_limit = 128;
-module_param(io_limit, uint, 0);
-MODULE_PARM_DESC(io_limit, "Maximum bytes per I/O (default 128)");
+static unsigned int at24_io_limit = 128;
+module_param_named(io_limit, at24_io_limit, uint, 0);
+MODULE_PARM_DESC(at24_io_limit, "Maximum bytes per I/O (default 128)");
/*
* Specs often allow 5 msec for a page write, sometimes 20 msec;
* it's important to recover from write timeouts.
*/
-static unsigned int write_timeout = 25;
-module_param(write_timeout, uint, 0);
-MODULE_PARM_DESC(write_timeout, "Time (in ms) to try writes (default 25)");
+static unsigned int at24_write_timeout = 25;
+module_param_named(write_timeout, at24_write_timeout, uint, 0);
+MODULE_PARM_DESC(at24_write_timeout, "Time (in ms) to try writes (default 25)");
#define AT24_SIZE_BYTELEN 5
#define AT24_SIZE_FLAGS 8
@@ -126,8 +126,9 @@ MODULE_PARM_DESC(write_timeout, "Time (in ms) to try writes (default 25)");
* iteration of processing the request. Both should be unsigned integers
* holding at least 32 bits.
*/
-#define loop_until_timeout(tout, op_time) \
- for (tout = jiffies + msecs_to_jiffies(write_timeout), op_time = 0; \
+#define at24_loop_until_timeout(tout, op_time) \
+ for (tout = jiffies + msecs_to_jiffies(at24_write_timeout), \
+ op_time = 0; \
op_time ? time_before(op_time, tout) : true; \
usleep_range(1000, 1500), op_time = jiffies)
@@ -286,8 +287,8 @@ static size_t at24_adjust_read_count(struct at24_data *at24,
count = remainder;
}
- if (count > io_limit)
- count = io_limit;
+ if (count > at24_io_limit)
+ count = at24_io_limit;
return count;
}
@@ -309,7 +310,7 @@ static ssize_t at24_regmap_read(struct at24_data *at24, char *buf,
/* adjust offset for mac and serial read ops */
offset += at24->offset_adj;
- loop_until_timeout(timeout, read_time) {
+ at24_loop_until_timeout(timeout, read_time) {
ret = regmap_bulk_read(regmap, offset, buf, count);
dev_dbg(&client->dev, "read %zu@%d --> %d (%ld)\n",
count, offset, ret, jiffies);
@@ -360,7 +361,7 @@ static ssize_t at24_regmap_write(struct at24_data *at24, const char *buf,
client = at24_client->client;
count = at24_adjust_write_count(at24, offset, count);
- loop_until_timeout(timeout, write_time) {
+ at24_loop_until_timeout(timeout, write_time) {
ret = regmap_bulk_write(regmap, offset, buf, count);
dev_dbg(&client->dev, "write %zu@%d --> %d (%ld)\n",
count, offset, ret, jiffies);
@@ -628,7 +629,8 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
writable = !(chip.flags & AT24_FLAG_READONLY);
if (writable) {
- at24->write_max = min_t(unsigned int, chip.page_size, io_limit);
+ at24->write_max = min_t(unsigned int,
+ chip.page_size, at24_io_limit);
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C) &&
at24->write_max > I2C_SMBUS_BLOCK_MAX)
at24->write_max = I2C_SMBUS_BLOCK_MAX;
@@ -743,12 +745,12 @@ static struct i2c_driver at24_driver = {
static int __init at24_init(void)
{
- if (!io_limit) {
- pr_err("at24: io_limit must not be 0!\n");
+ if (!at24_io_limit) {
+ pr_err("at24: at24_io_limit must not be 0!\n");
return -EINVAL;
}
- io_limit = rounddown_pow_of_two(io_limit);
+ at24_io_limit = rounddown_pow_of_two(at24_io_limit);
return i2c_add_driver(&at24_driver);
}
module_init(at24_init);

Privacy Policy