aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAriel D'Alessandro <ariel@vanguardiasur.com.ar>2015-12-07 10:57:39 +0000
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2016-02-07 23:04:57 -0800
commitf02f8aee211a1fc035cd3f87af8a39126eda1c20 (patch)
tree83deb842a8e511b40748c295837a3a2e9c3c2b6c
parent4020d07e917854c4300092c12503a382315ea844 (diff)
nvmem: NXP LPC18xx EEPROM memory NVMEM driver
This commit adds support for NXP LPC18xx EEPROM memory found in NXP LPC185x/3x and LPC435x/3x/2x/1x devices. EEPROM size is 16384 bytes and it can be entirely read and written/erased with 1 word (4 bytes) granularity. The last page (128 bytes) contains the EEPROM initialization data and is not writable. Erase/program time is less than 3ms. The EEPROM device requires a ~1500 kHz clock (min 800 kHz, max 1600 kHz) that is generated dividing the system bus clock by the division factor, contained in the divider register (minus 1 encoded). EEPROM will be kept in Power Down mode except during read/write calls. Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-rw-r--r--drivers/nvmem/Kconfig9
-rw-r--r--drivers/nvmem/Makefile2
-rw-r--r--drivers/nvmem/lpc18xx_eeprom.c330
3 files changed, 341 insertions, 0 deletions
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index bc4ea585b42e..6ff1b5051ae1 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -25,6 +25,15 @@ config NVMEM_IMX_OCOTP
This driver can also be built as a module. If so, the module
will be called nvmem-imx-ocotp.
+config NVMEM_LPC18XX_EEPROM
+ tristate "NXP LPC18XX EEPROM Memory Support"
+ depends on ARCH_LPC18XX || COMPILE_TEST
+ help
+ Say Y here to include support for NXP LPC18xx EEPROM memory found in
+ NXP LPC185x/3x and LPC435x/3x/2x/1x devices.
+ To compile this driver as a module, choose M here: the module
+ will be called nvmem_lpc18xx_eeprom.
+
config NVMEM_MXS_OCOTP
tristate "Freescale MXS On-Chip OTP Memory Support"
depends on ARCH_MXS || COMPILE_TEST
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 95dde3f8f085..c14a55644c5f 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -8,6 +8,8 @@ nvmem_core-y := core.o
# Devices
obj-$(CONFIG_NVMEM_IMX_OCOTP) += nvmem-imx-ocotp.o
nvmem-imx-ocotp-y := imx-ocotp.o
+obj-$(CONFIG_NVMEM_LPC18XX_EEPROM) += nvmem_lpc18xx_eeprom.o
+nvmem_lpc18xx_eeprom-y := lpc18xx_eeprom.o
obj-$(CONFIG_NVMEM_MXS_OCOTP) += nvmem-mxs-ocotp.o
nvmem-mxs-ocotp-y := mxs-ocotp.o
obj-$(CONFIG_QCOM_QFPROM) += nvmem_qfprom.o
diff --git a/drivers/nvmem/lpc18xx_eeprom.c b/drivers/nvmem/lpc18xx_eeprom.c
new file mode 100644
index 000000000000..878fce789341
--- /dev/null
+++ b/drivers/nvmem/lpc18xx_eeprom.c
@@ -0,0 +1,330 @@
+/*
+ * NXP LPC18xx/LPC43xx EEPROM memory NVMEM driver
+ *
+ * Copyright (c) 2015 Ariel D'Alessandro <ariel@vanguardiasur.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/* Registers */
+#define LPC18XX_EEPROM_AUTOPROG 0x00c
+#define LPC18XX_EEPROM_AUTOPROG_WORD 0x1
+
+#define LPC18XX_EEPROM_CLKDIV 0x014
+
+#define LPC18XX_EEPROM_PWRDWN 0x018
+#define LPC18XX_EEPROM_PWRDWN_NO 0x0
+#define LPC18XX_EEPROM_PWRDWN_YES 0x1
+
+#define LPC18XX_EEPROM_INTSTAT 0xfe0
+#define LPC18XX_EEPROM_INTSTAT_END_OF_PROG BIT(2)
+
+#define LPC18XX_EEPROM_INTSTATCLR 0xfe8
+#define LPC18XX_EEPROM_INTSTATCLR_PROG_CLR_ST BIT(2)
+
+/* Fixed page size (bytes) */
+#define LPC18XX_EEPROM_PAGE_SIZE 0x80
+
+/* EEPROM device requires a ~1500 kHz clock (min 800 kHz, max 1600 kHz) */
+#define LPC18XX_EEPROM_CLOCK_HZ 1500000
+
+/* EEPROM requires 3 ms of erase/program time between each writing */
+#define LPC18XX_EEPROM_PROGRAM_TIME 3
+
+struct lpc18xx_eeprom_dev {
+ struct clk *clk;
+ void __iomem *reg_base;
+ void __iomem *mem_base;
+ struct nvmem_device *nvmem;
+ unsigned reg_bytes;
+ unsigned val_bytes;
+};
+
+static struct regmap_config lpc18xx_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+};
+
+static inline void lpc18xx_eeprom_writel(struct lpc18xx_eeprom_dev *eeprom,
+ u32 reg, u32 val)
+{
+ writel(val, eeprom->reg_base + reg);
+}
+
+static inline u32 lpc18xx_eeprom_readl(struct lpc18xx_eeprom_dev *eeprom,
+ u32 reg)
+{
+ return readl(eeprom->reg_base + reg);
+}
+
+static int lpc18xx_eeprom_busywait_until_prog(struct lpc18xx_eeprom_dev *eeprom)
+{
+ unsigned long end;
+ u32 val;
+
+ /* Wait until EEPROM program operation has finished */
+ end = jiffies + msecs_to_jiffies(LPC18XX_EEPROM_PROGRAM_TIME * 10);
+
+ while (time_is_after_jiffies(end)) {
+ val = lpc18xx_eeprom_readl(eeprom, LPC18XX_EEPROM_INTSTAT);
+
+ if (val & LPC18XX_EEPROM_INTSTAT_END_OF_PROG) {
+ lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_INTSTATCLR,
+ LPC18XX_EEPROM_INTSTATCLR_PROG_CLR_ST);
+ return 0;
+ }
+
+ usleep_range(LPC18XX_EEPROM_PROGRAM_TIME * USEC_PER_MSEC,
+ (LPC18XX_EEPROM_PROGRAM_TIME + 1) * USEC_PER_MSEC);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int lpc18xx_eeprom_gather_write(void *context, const void *reg,
+ size_t reg_size, const void *val,
+ size_t val_size)
+{
+ struct lpc18xx_eeprom_dev *eeprom = context;
+ unsigned int offset = *(u32 *)reg;
+ int ret;
+
+ if (offset % lpc18xx_regmap_config.reg_stride)
+ return -EINVAL;
+
+ lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
+ LPC18XX_EEPROM_PWRDWN_NO);
+
+ /* Wait 100 us while the EEPROM wakes up */
+ usleep_range(100, 200);
+
+ while (val_size) {
+ writel(*(u32 *)val, eeprom->mem_base + offset);
+ ret = lpc18xx_eeprom_busywait_until_prog(eeprom);
+ if (ret < 0)
+ return ret;
+
+ val_size -= eeprom->val_bytes;
+ val += eeprom->val_bytes;
+ offset += eeprom->val_bytes;
+ }
+
+ lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
+ LPC18XX_EEPROM_PWRDWN_YES);
+
+ return 0;
+}
+
+static int lpc18xx_eeprom_write(void *context, const void *data, size_t count)
+{
+ struct lpc18xx_eeprom_dev *eeprom = context;
+ unsigned int offset = eeprom->reg_bytes;
+
+ if (count <= offset)
+ return -EINVAL;
+
+ return lpc18xx_eeprom_gather_write(context, data, eeprom->reg_bytes,
+ data + offset, count - offset);
+}
+
+static int lpc18xx_eeprom_read(void *context, const void *reg, size_t reg_size,
+ void *val, size_t val_size)
+{
+ struct lpc18xx_eeprom_dev *eeprom = context;
+ unsigned int offset = *(u32 *)reg;
+
+ lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
+ LPC18XX_EEPROM_PWRDWN_NO);
+
+ /* Wait 100 us while the EEPROM wakes up */
+ usleep_range(100, 200);
+
+ while (val_size) {
+ *(u32 *)val = readl(eeprom->mem_base + offset);
+ val_size -= eeprom->val_bytes;
+ val += eeprom->val_bytes;
+ offset += eeprom->val_bytes;
+ }
+
+ lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
+ LPC18XX_EEPROM_PWRDWN_YES);
+
+ return 0;
+}
+
+static struct regmap_bus lpc18xx_eeprom_bus = {
+ .write = lpc18xx_eeprom_write,
+ .gather_write = lpc18xx_eeprom_gather_write,
+ .read = lpc18xx_eeprom_read,
+ .reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
+ .val_format_endian_default = REGMAP_ENDIAN_NATIVE,
+};
+
+static bool lpc18xx_eeprom_writeable_reg(struct device *dev, unsigned int reg)
+{
+ /*
+ * The last page contains the EEPROM initialization data and is not
+ * writable.
+ */
+ return reg <= lpc18xx_regmap_config.max_register -
+ LPC18XX_EEPROM_PAGE_SIZE;
+}
+
+static bool lpc18xx_eeprom_readable_reg(struct device *dev, unsigned int reg)
+{
+ return reg <= lpc18xx_regmap_config.max_register;
+}
+
+static struct nvmem_config lpc18xx_nvmem_config = {
+ .name = "lpc18xx-eeprom",
+ .owner = THIS_MODULE,
+};
+
+static int lpc18xx_eeprom_probe(struct platform_device *pdev)
+{
+ struct lpc18xx_eeprom_dev *eeprom;
+ struct device *dev = &pdev->dev;
+ struct reset_control *rst;
+ unsigned long clk_rate;
+ struct regmap *regmap;
+ struct resource *res;
+ int ret;
+
+ eeprom = devm_kzalloc(dev, sizeof(*eeprom), GFP_KERNEL);
+ if (!eeprom)
+ return -ENOMEM;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "reg");
+ eeprom->reg_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(eeprom->reg_base))
+ return PTR_ERR(eeprom->reg_base);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem");
+ eeprom->mem_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(eeprom->mem_base))
+ return PTR_ERR(eeprom->mem_base);
+
+ eeprom->clk = devm_clk_get(&pdev->dev, "eeprom");
+ if (IS_ERR(eeprom->clk)) {
+ dev_err(&pdev->dev, "failed to get eeprom clock\n");
+ return PTR_ERR(eeprom->clk);
+ }
+
+ ret = clk_prepare_enable(eeprom->clk);
+ if (ret < 0) {
+ dev_err(dev, "failed to prepare/enable eeprom clk: %d\n", ret);
+ return ret;
+ }
+
+ rst = devm_reset_control_get(dev, NULL);
+ if (IS_ERR(rst)) {
+ dev_err(dev, "failed to get reset: %ld\n", PTR_ERR(rst));
+ ret = PTR_ERR(rst);
+ goto err_clk;
+ }
+
+ ret = reset_control_assert(rst);
+ if (ret < 0) {
+ dev_err(dev, "failed to assert reset: %d\n", ret);
+ goto err_clk;
+ }
+
+ eeprom->val_bytes = lpc18xx_regmap_config.val_bits / BITS_PER_BYTE;
+ eeprom->reg_bytes = lpc18xx_regmap_config.reg_bits / BITS_PER_BYTE;
+
+ /*
+ * Clock rate is generated by dividing the system bus clock by the
+ * division factor, contained in the divider register (minus 1 encoded).
+ */
+ clk_rate = clk_get_rate(eeprom->clk);
+ clk_rate = DIV_ROUND_UP(clk_rate, LPC18XX_EEPROM_CLOCK_HZ) - 1;
+ lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_CLKDIV, clk_rate);
+
+ /*
+ * Writing a single word to the page will start the erase/program cycle
+ * automatically
+ */
+ lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_AUTOPROG,
+ LPC18XX_EEPROM_AUTOPROG_WORD);
+
+ lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
+ LPC18XX_EEPROM_PWRDWN_YES);
+
+ lpc18xx_regmap_config.max_register = resource_size(res) - 1;
+ lpc18xx_regmap_config.writeable_reg = lpc18xx_eeprom_writeable_reg;
+ lpc18xx_regmap_config.readable_reg = lpc18xx_eeprom_readable_reg;
+
+ regmap = devm_regmap_init(dev, &lpc18xx_eeprom_bus, eeprom,
+ &lpc18xx_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "regmap init failed: %ld\n", PTR_ERR(regmap));
+ ret = PTR_ERR(regmap);
+ goto err_clk;
+ }
+
+ lpc18xx_nvmem_config.dev = dev;
+
+ eeprom->nvmem = nvmem_register(&lpc18xx_nvmem_config);
+ if (IS_ERR(eeprom->nvmem)) {
+ ret = PTR_ERR(eeprom->nvmem);
+ goto err_clk;
+ }
+
+ platform_set_drvdata(pdev, eeprom);
+
+ return 0;
+
+err_clk:
+ clk_disable_unprepare(eeprom->clk);
+
+ return ret;
+}
+
+static int lpc18xx_eeprom_remove(struct platform_device *pdev)
+{
+ struct lpc18xx_eeprom_dev *eeprom = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = nvmem_unregister(eeprom->nvmem);
+ if (ret < 0)
+ return ret;
+
+ clk_disable_unprepare(eeprom->clk);
+
+ return 0;
+}
+
+static const struct of_device_id lpc18xx_eeprom_of_match[] = {
+ { .compatible = "nxp,lpc1857-eeprom" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, lpc18xx_eeprom_of_match);
+
+static struct platform_driver lpc18xx_eeprom_driver = {
+ .probe = lpc18xx_eeprom_probe,
+ .remove = lpc18xx_eeprom_remove,
+ .driver = {
+ .name = "lpc18xx-eeprom",
+ .of_match_table = lpc18xx_eeprom_of_match,
+ },
+};
+
+module_platform_driver(lpc18xx_eeprom_driver);
+
+MODULE_AUTHOR("Ariel D'Alessandro <ariel@vanguardiasur.com.ar>");
+MODULE_DESCRIPTION("NXP LPC18xx EEPROM memory Driver");
+MODULE_LICENSE("GPL v2");

Privacy Policy