aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/clk
diff options
context:
space:
mode:
authorLori Hikichi <lori.hikichi@broadcom.com>2017-08-14 12:00:38 -0700
committerStephen Boyd <sboyd@codeaurora.org>2017-12-28 14:53:33 -0800
commitbecf123772a9ef15823a3f495478fe68e45b5028 (patch)
tree3aea47d2966f28410ebf32995c16fd9178e31e16 /drivers/clk
parent4fbd8d194f06c8a3fd2af1ce560ddb31f7ec8323 (diff)
clk: iproc: Allow iproc pll to runtime calculate vco parameters
Add the ability for the iproc pll to calculate the pll parameters at runtime instead of only using predefined tables. This ability allows the clock users to select from the full range of vco frequencies. The old method of table based programming is retained so that existing users will retain expected behavior. The flag IPROC_CLK_PLL_CALC_PARAM will need to be set to enable the new runtime calculation method. Currently, this is only being enabled for the audio pll. This feature also revealed a problem with the driver using the round_rate api. The round_rate api does not allow for frequencies larger than 2^31 to be returned. Those large frequencies are interpreted as an error code. Therefore, we are moving to the determine_rate api which solves this problem. Signed-off-by: Simran Rai <ssimran@broadcom.com> Signed-off-by: Lori Hikichi <lori.hikichi@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Diffstat (limited to 'drivers/clk')
-rw-r--r--drivers/clk/bcm/clk-cygnus.c25
-rw-r--r--drivers/clk/bcm/clk-iproc-pll.c97
-rw-r--r--drivers/clk/bcm/clk-iproc.h5
3 files changed, 92 insertions, 35 deletions
diff --git a/drivers/clk/bcm/clk-cygnus.c b/drivers/clk/bcm/clk-cygnus.c
index 464fdc4bc66b..b8d073e4855f 100644
--- a/drivers/clk/bcm/clk-cygnus.c
+++ b/drivers/clk/bcm/clk-cygnus.c
@@ -269,23 +269,10 @@ static void __init cygnus_asiu_init(struct device_node *node)
}
CLK_OF_DECLARE(cygnus_asiu_clk, "brcm,cygnus-asiu-clk", cygnus_asiu_init);
-/*
- * AUDIO PLL VCO frequency parameter table
- *
- * PLL output frequency = ((ndiv_int + ndiv_frac / 2^20) *
- * (parent clock rate / pdiv)
- *
- * On Cygnus, parent is the 25MHz oscillator
- */
-static const struct iproc_pll_vco_param audiopll_vco_params[] = {
- /* rate (Hz) ndiv_int ndiv_frac pdiv */
- { 1354750204UL, 54, 199238, 1 },
- { 1769470191UL, 70, 816639, 1 },
-};
-
static const struct iproc_pll_ctrl audiopll = {
.flags = IPROC_CLK_PLL_NEEDS_SW_CFG | IPROC_CLK_PLL_HAS_NDIV_FRAC |
- IPROC_CLK_PLL_USER_MODE_ON | IPROC_CLK_PLL_RESET_ACTIVE_LOW,
+ IPROC_CLK_PLL_USER_MODE_ON | IPROC_CLK_PLL_RESET_ACTIVE_LOW |
+ IPROC_CLK_PLL_CALC_PARAM,
.reset = RESET_VAL(0x5c, 0, 1),
.dig_filter = DF_VAL(0x48, 0, 3, 6, 4, 3, 3),
.sw_ctrl = SW_CTRL_VAL(0x4, 0),
@@ -300,8 +287,7 @@ static const struct iproc_pll_ctrl audiopll = {
static const struct iproc_clk_ctrl audiopll_clk[] = {
[BCM_CYGNUS_AUDIOPLL_CH0] = {
.channel = BCM_CYGNUS_AUDIOPLL_CH0,
- .flags = IPROC_CLK_AON |
- IPROC_CLK_MCLK_DIV_BY_2,
+ .flags = IPROC_CLK_AON | IPROC_CLK_MCLK_DIV_BY_2,
.enable = ENABLE_VAL(0x14, 8, 10, 9),
.mdiv = REG_VAL(0x14, 0, 8),
},
@@ -321,9 +307,8 @@ static const struct iproc_clk_ctrl audiopll_clk[] = {
static void __init cygnus_audiopll_clk_init(struct device_node *node)
{
- iproc_pll_clk_setup(node, &audiopll, audiopll_vco_params,
- ARRAY_SIZE(audiopll_vco_params), audiopll_clk,
- ARRAY_SIZE(audiopll_clk));
+ iproc_pll_clk_setup(node, &audiopll, NULL, 0,
+ audiopll_clk, ARRAY_SIZE(audiopll_clk));
}
CLK_OF_DECLARE(cygnus_audiopll, "brcm,cygnus-audiopll",
cygnus_audiopll_clk_init);
diff --git a/drivers/clk/bcm/clk-iproc-pll.c b/drivers/clk/bcm/clk-iproc-pll.c
index 375d8dd80d45..9514ecf319b0 100644
--- a/drivers/clk/bcm/clk-iproc-pll.c
+++ b/drivers/clk/bcm/clk-iproc-pll.c
@@ -95,6 +95,39 @@ struct iproc_pll {
#define to_iproc_clk(hw) container_of(hw, struct iproc_clk, hw)
+static int pll_calc_param(unsigned long target_rate,
+ unsigned long parent_rate,
+ struct iproc_pll_vco_param *vco_out)
+{
+ u64 ndiv_int, ndiv_frac, residual;
+
+ ndiv_int = target_rate / parent_rate;
+
+ if (!ndiv_int || (ndiv_int > 255))
+ return -EINVAL;
+
+ residual = target_rate - (ndiv_int * parent_rate);
+ residual <<= 20;
+
+ /*
+ * Add half of the divisor so the result will be rounded to closest
+ * instead of rounded down.
+ */
+ residual += (parent_rate / 2);
+ ndiv_frac = div64_u64((u64)residual, (u64)parent_rate);
+
+ vco_out->ndiv_int = ndiv_int;
+ vco_out->ndiv_frac = ndiv_frac;
+ vco_out->pdiv = 1;
+
+ vco_out->rate = vco_out->ndiv_int * parent_rate;
+ residual = (u64)vco_out->ndiv_frac * (u64)parent_rate;
+ residual >>= 20;
+ vco_out->rate += residual;
+
+ return 0;
+}
+
/*
* Based on the target frequency, find a match from the VCO frequency parameter
* table and return its index
@@ -252,11 +285,10 @@ static void __pll_bring_out_reset(struct iproc_pll *pll, unsigned int kp,
iproc_pll_write(pll, pll->control_base, reset->offset, val);
}
-static int pll_set_rate(struct iproc_clk *clk, unsigned int rate_index,
+static int pll_set_rate(struct iproc_clk *clk, struct iproc_pll_vco_param *vco,
unsigned long parent_rate)
{
struct iproc_pll *pll = clk->pll;
- const struct iproc_pll_vco_param *vco = &pll->vco_param[rate_index];
const struct iproc_pll_ctrl *ctrl = pll->ctrl;
int ka = 0, ki, kp, ret;
unsigned long rate = vco->rate;
@@ -431,25 +463,50 @@ static unsigned long iproc_pll_recalc_rate(struct clk_hw *hw,
return clk->rate;
}
-static long iproc_pll_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *parent_rate)
+static int iproc_pll_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
- unsigned i;
+ unsigned int i;
struct iproc_clk *clk = to_iproc_clk(hw);
struct iproc_pll *pll = clk->pll;
+ const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+ unsigned long diff, best_diff;
+ unsigned int best_idx = 0;
+ int ret;
- if (rate == 0 || *parent_rate == 0 || !pll->vco_param)
+ if (req->rate == 0 || req->best_parent_rate == 0)
return -EINVAL;
+ if (ctrl->flags & IPROC_CLK_PLL_CALC_PARAM) {
+ struct iproc_pll_vco_param vco_param;
+
+ ret = pll_calc_param(req->rate, req->best_parent_rate,
+ &vco_param);
+ if (ret)
+ return ret;
+
+ req->rate = vco_param.rate;
+ return 0;
+ }
+
+ if (!pll->vco_param)
+ return -EINVAL;
+
+ best_diff = ULONG_MAX;
for (i = 0; i < pll->num_vco_entries; i++) {
- if (rate <= pll->vco_param[i].rate)
+ diff = abs(req->rate - pll->vco_param[i].rate);
+ if (diff <= best_diff) {
+ best_diff = diff;
+ best_idx = i;
+ }
+ /* break now if perfect match */
+ if (diff == 0)
break;
}
- if (i == pll->num_vco_entries)
- i--;
+ req->rate = pll->vco_param[best_idx].rate;
- return pll->vco_param[i].rate;
+ return 0;
}
static int iproc_pll_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -457,13 +514,23 @@ static int iproc_pll_set_rate(struct clk_hw *hw, unsigned long rate,
{
struct iproc_clk *clk = to_iproc_clk(hw);
struct iproc_pll *pll = clk->pll;
+ const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+ struct iproc_pll_vco_param vco_param;
int rate_index, ret;
- rate_index = pll_get_rate_index(pll, rate);
- if (rate_index < 0)
- return rate_index;
+ if (ctrl->flags & IPROC_CLK_PLL_CALC_PARAM) {
+ ret = pll_calc_param(rate, parent_rate, &vco_param);
+ if (ret)
+ return ret;
+ } else {
+ rate_index = pll_get_rate_index(pll, rate);
+ if (rate_index < 0)
+ return rate_index;
+
+ vco_param = pll->vco_param[rate_index];
+ }
- ret = pll_set_rate(clk, rate_index, parent_rate);
+ ret = pll_set_rate(clk, &vco_param, parent_rate);
return ret;
}
@@ -471,7 +538,7 @@ static const struct clk_ops iproc_pll_ops = {
.enable = iproc_pll_enable,
.disable = iproc_pll_disable,
.recalc_rate = iproc_pll_recalc_rate,
- .round_rate = iproc_pll_round_rate,
+ .determine_rate = iproc_pll_determine_rate,
.set_rate = iproc_pll_set_rate,
};
diff --git a/drivers/clk/bcm/clk-iproc.h b/drivers/clk/bcm/clk-iproc.h
index 2148b4ea9f28..a48ddd3e0b28 100644
--- a/drivers/clk/bcm/clk-iproc.h
+++ b/drivers/clk/bcm/clk-iproc.h
@@ -81,6 +81,11 @@
#define IPROC_CLK_PLL_RESET_ACTIVE_LOW BIT(9)
/*
+ * Calculate the PLL parameters are runtime, instead of using table
+ */
+#define IPROC_CLK_PLL_CALC_PARAM BIT(10)
+
+/*
* Parameters for VCO frequency configuration
*
* VCO frequency =

Privacy Policy