aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media/pci
diff options
context:
space:
mode:
authorMauro Carvalho Chehab <mchehab@redhat.com>2012-06-14 16:35:57 -0300
committerMauro Carvalho Chehab <mchehab@redhat.com>2012-08-13 23:30:06 -0300
commit25aee3debe0464f6c680173041fa3de30ec9ff54 (patch)
treee2b14f952a0831399f9cbb444cfb9c7980b6485b /drivers/media/pci
parent786baecfe78f8e25547c628b48a60fc8e5636056 (diff)
[media] Rename media/dvb as media/pci
The remaining dvb drivers are pci, so rename them to match the bus. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers/media/pci')
-rw-r--r--drivers/media/pci/Kconfig50
-rw-r--r--drivers/media/pci/Makefile13
-rw-r--r--drivers/media/pci/b2c2/Kconfig45
-rw-r--r--drivers/media/pci/b2c2/Makefile16
-rw-r--r--drivers/media/pci/b2c2/flexcop-common.h185
-rw-r--r--drivers/media/pci/b2c2/flexcop-dma.c172
-rw-r--r--drivers/media/pci/b2c2/flexcop-eeprom.c147
-rw-r--r--drivers/media/pci/b2c2/flexcop-fe-tuner.c678
-rw-r--r--drivers/media/pci/b2c2/flexcop-hw-filter.c232
-rw-r--r--drivers/media/pci/b2c2/flexcop-i2c.c288
-rw-r--r--drivers/media/pci/b2c2/flexcop-misc.c86
-rw-r--r--drivers/media/pci/b2c2/flexcop-pci.c450
-rw-r--r--drivers/media/pci/b2c2/flexcop-reg.h166
-rw-r--r--drivers/media/pci/b2c2/flexcop-sram.c363
-rw-r--r--drivers/media/pci/b2c2/flexcop-usb.c587
-rw-r--r--drivers/media/pci/b2c2/flexcop-usb.h111
-rw-r--r--drivers/media/pci/b2c2/flexcop.c324
-rw-r--r--drivers/media/pci/b2c2/flexcop.h29
-rw-r--r--drivers/media/pci/b2c2/flexcop_ibi_value_be.h455
-rw-r--r--drivers/media/pci/b2c2/flexcop_ibi_value_le.h455
-rw-r--r--drivers/media/pci/bt8xx/Kconfig22
-rw-r--r--drivers/media/pci/bt8xx/Makefile6
-rw-r--r--drivers/media/pci/bt8xx/bt878.c609
-rw-r--r--drivers/media/pci/bt8xx/bt878.h159
-rw-r--r--drivers/media/pci/bt8xx/dst.c1873
-rw-r--r--drivers/media/pci/bt8xx/dst_ca.c726
-rw-r--r--drivers/media/pci/bt8xx/dst_ca.h58
-rw-r--r--drivers/media/pci/bt8xx/dst_common.h182
-rw-r--r--drivers/media/pci/bt8xx/dst_priv.h35
-rw-r--r--drivers/media/pci/bt8xx/dvb-bt8xx.c975
-rw-r--r--drivers/media/pci/bt8xx/dvb-bt8xx.h63
-rw-r--r--drivers/media/pci/ddbridge/Kconfig18
-rw-r--r--drivers/media/pci/ddbridge/Makefile14
-rw-r--r--drivers/media/pci/ddbridge/ddbridge-core.c1723
-rw-r--r--drivers/media/pci/ddbridge/ddbridge-regs.h151
-rw-r--r--drivers/media/pci/ddbridge/ddbridge.h185
-rw-r--r--drivers/media/pci/dm1105/Kconfig20
-rw-r--r--drivers/media/pci/dm1105/Makefile3
-rw-r--r--drivers/media/pci/dm1105/dm1105.c1248
-rw-r--r--drivers/media/pci/mantis/Kconfig38
-rw-r--r--drivers/media/pci/mantis/Makefile28
-rw-r--r--drivers/media/pci/mantis/hopper_cards.c277
-rw-r--r--drivers/media/pci/mantis/hopper_vp3028.c88
-rw-r--r--drivers/media/pci/mantis/hopper_vp3028.h30
-rw-r--r--drivers/media/pci/mantis/mantis_ca.c209
-rw-r--r--drivers/media/pci/mantis/mantis_ca.h27
-rw-r--r--drivers/media/pci/mantis/mantis_cards.c307
-rw-r--r--drivers/media/pci/mantis/mantis_common.h179
-rw-r--r--drivers/media/pci/mantis/mantis_core.c235
-rw-r--r--drivers/media/pci/mantis/mantis_core.h57
-rw-r--r--drivers/media/pci/mantis/mantis_dma.c230
-rw-r--r--drivers/media/pci/mantis/mantis_dma.h30
-rw-r--r--drivers/media/pci/mantis/mantis_dvb.c301
-rw-r--r--drivers/media/pci/mantis/mantis_dvb.h35
-rw-r--r--drivers/media/pci/mantis/mantis_evm.c117
-rw-r--r--drivers/media/pci/mantis/mantis_hif.c239
-rw-r--r--drivers/media/pci/mantis/mantis_hif.h29
-rw-r--r--drivers/media/pci/mantis/mantis_i2c.c266
-rw-r--r--drivers/media/pci/mantis/mantis_i2c.h30
-rw-r--r--drivers/media/pci/mantis/mantis_input.c159
-rw-r--r--drivers/media/pci/mantis/mantis_ioc.c124
-rw-r--r--drivers/media/pci/mantis/mantis_ioc.h51
-rw-r--r--drivers/media/pci/mantis/mantis_link.h83
-rw-r--r--drivers/media/pci/mantis/mantis_pci.c170
-rw-r--r--drivers/media/pci/mantis/mantis_pci.h27
-rw-r--r--drivers/media/pci/mantis/mantis_pcmcia.c121
-rw-r--r--drivers/media/pci/mantis/mantis_reg.h197
-rw-r--r--drivers/media/pci/mantis/mantis_uart.c188
-rw-r--r--drivers/media/pci/mantis/mantis_uart.h58
-rw-r--r--drivers/media/pci/mantis/mantis_vp1033.c212
-rw-r--r--drivers/media/pci/mantis/mantis_vp1033.h30
-rw-r--r--drivers/media/pci/mantis/mantis_vp1034.c120
-rw-r--r--drivers/media/pci/mantis/mantis_vp1034.h33
-rw-r--r--drivers/media/pci/mantis/mantis_vp1041.c357
-rw-r--r--drivers/media/pci/mantis/mantis_vp1041.h33
-rw-r--r--drivers/media/pci/mantis/mantis_vp2033.c188
-rw-r--r--drivers/media/pci/mantis/mantis_vp2033.h30
-rw-r--r--drivers/media/pci/mantis/mantis_vp2040.c187
-rw-r--r--drivers/media/pci/mantis/mantis_vp2040.h32
-rw-r--r--drivers/media/pci/mantis/mantis_vp3028.c38
-rw-r--r--drivers/media/pci/mantis/mantis_vp3028.h33
-rw-r--r--drivers/media/pci/mantis/mantis_vp3030.c105
-rw-r--r--drivers/media/pci/mantis/mantis_vp3030.h30
-rw-r--r--drivers/media/pci/ngene/Kconfig13
-rw-r--r--drivers/media/pci/ngene/Makefile14
-rw-r--r--drivers/media/pci/ngene/ngene-cards.c823
-rw-r--r--drivers/media/pci/ngene/ngene-core.c1707
-rw-r--r--drivers/media/pci/ngene/ngene-dvb.c261
-rw-r--r--drivers/media/pci/ngene/ngene-i2c.c176
-rw-r--r--drivers/media/pci/ngene/ngene.h921
-rw-r--r--drivers/media/pci/pluto2/Kconfig15
-rw-r--r--drivers/media/pci/pluto2/Makefile3
-rw-r--r--drivers/media/pci/pluto2/pluto2.c815
-rw-r--r--drivers/media/pci/pt1/Kconfig12
-rw-r--r--drivers/media/pci/pt1/Makefile5
-rw-r--r--drivers/media/pci/pt1/pt1.c1246
-rw-r--r--drivers/media/pci/pt1/va1j5jf8007s.c735
-rw-r--r--drivers/media/pci/pt1/va1j5jf8007s.h46
-rw-r--r--drivers/media/pci/pt1/va1j5jf8007t.c536
-rw-r--r--drivers/media/pci/pt1/va1j5jf8007t.h46
-rw-r--r--drivers/media/pci/ttpci/Kconfig159
-rw-r--r--drivers/media/pci/ttpci/Makefile21
-rw-r--r--drivers/media/pci/ttpci/av7110.c2939
-rw-r--r--drivers/media/pci/ttpci/av7110.h314
-rw-r--r--drivers/media/pci/ttpci/av7110_av.c1626
-rw-r--r--drivers/media/pci/ttpci/av7110_av.h30
-rw-r--r--drivers/media/pci/ttpci/av7110_ca.c387
-rw-r--r--drivers/media/pci/ttpci/av7110_ca.h14
-rw-r--r--drivers/media/pci/ttpci/av7110_hw.c1208
-rw-r--r--drivers/media/pci/ttpci/av7110_hw.h495
-rw-r--r--drivers/media/pci/ttpci/av7110_ipack.c403
-rw-r--r--drivers/media/pci/ttpci/av7110_ipack.h12
-rw-r--r--drivers/media/pci/ttpci/av7110_ir.c415
-rw-r--r--drivers/media/pci/ttpci/av7110_v4l.c966
-rw-r--r--drivers/media/pci/ttpci/budget-av.c1640
-rw-r--r--drivers/media/pci/ttpci/budget-ci.c1591
-rw-r--r--drivers/media/pci/ttpci/budget-core.c602
-rw-r--r--drivers/media/pci/ttpci/budget-patch.c680
-rw-r--r--drivers/media/pci/ttpci/budget.c871
-rw-r--r--drivers/media/pci/ttpci/budget.h124
-rw-r--r--drivers/media/pci/ttpci/ttpci-eeprom.c176
-rw-r--r--drivers/media/pci/ttpci/ttpci-eeprom.h34
122 files changed, 40361 insertions, 0 deletions
diff --git a/drivers/media/pci/Kconfig b/drivers/media/pci/Kconfig
new file mode 100644
index 000000000000..3b9164af6ec4
--- /dev/null
+++ b/drivers/media/pci/Kconfig
@@ -0,0 +1,50 @@
+#
+# DVB device configuration
+#
+
+menuconfig DVB_CAPTURE_DRIVERS
+ bool "DVB/ATSC adapters"
+ depends on DVB_CORE
+ default y
+ ---help---
+ Say Y to select Digital TV adapters
+
+if DVB_CAPTURE_DRIVERS && DVB_CORE
+
+comment "Supported SAA7146 based PCI Adapters"
+ depends on DVB_CORE && PCI && I2C
+source "drivers/media/pci/ttpci/Kconfig"
+
+comment "Supported FlexCopII (B2C2) Adapters"
+ depends on DVB_CORE && (PCI || USB) && I2C
+source "drivers/media/pci/b2c2/Kconfig"
+
+comment "Supported BT878 Adapters"
+ depends on DVB_CORE && PCI && I2C
+source "drivers/media/pci/bt8xx/Kconfig"
+
+comment "Supported Pluto2 Adapters"
+ depends on DVB_CORE && PCI && I2C
+source "drivers/media/pci/pluto2/Kconfig"
+
+comment "Supported SDMC DM1105 Adapters"
+ depends on DVB_CORE && PCI && I2C
+source "drivers/media/pci/dm1105/Kconfig"
+
+comment "Supported Earthsoft PT1 Adapters"
+ depends on DVB_CORE && PCI && I2C
+source "drivers/media/pci/pt1/Kconfig"
+
+comment "Supported Mantis Adapters"
+ depends on DVB_CORE && PCI && I2C
+ source "drivers/media/pci/mantis/Kconfig"
+
+comment "Supported nGene Adapters"
+ depends on DVB_CORE && PCI && I2C
+ source "drivers/media/pci/ngene/Kconfig"
+
+comment "Supported ddbridge ('Octopus') Adapters"
+ depends on DVB_CORE && PCI && I2C
+ source "drivers/media/pci/ddbridge/Kconfig"
+
+endif # DVB_CAPTURE_DRIVERS
diff --git a/drivers/media/pci/Makefile b/drivers/media/pci/Makefile
new file mode 100644
index 000000000000..c5fa43a275ae
--- /dev/null
+++ b/drivers/media/pci/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile for the kernel multimedia device drivers.
+#
+
+obj-y := ttpci/ \
+ b2c2/ \
+ bt8xx/ \
+ pluto2/ \
+ dm1105/ \
+ pt1/ \
+ mantis/ \
+ ngene/ \
+ ddbridge/
diff --git a/drivers/media/pci/b2c2/Kconfig b/drivers/media/pci/b2c2/Kconfig
new file mode 100644
index 000000000000..9e5781400744
--- /dev/null
+++ b/drivers/media/pci/b2c2/Kconfig
@@ -0,0 +1,45 @@
+config DVB_B2C2_FLEXCOP
+ tristate "Technisat/B2C2 FlexCopII(b) and FlexCopIII adapters"
+ depends on DVB_CORE && I2C
+ select DVB_PLL if !DVB_FE_CUSTOMISE
+ select DVB_STV0299 if !DVB_FE_CUSTOMISE
+ select DVB_MT352 if !DVB_FE_CUSTOMISE
+ select DVB_MT312 if !DVB_FE_CUSTOMISE
+ select DVB_NXT200X if !DVB_FE_CUSTOMISE
+ select DVB_STV0297 if !DVB_FE_CUSTOMISE
+ select DVB_BCM3510 if !DVB_FE_CUSTOMISE
+ select DVB_LGDT330X if !DVB_FE_CUSTOMISE
+ select DVB_S5H1420 if !DVB_FE_CUSTOMISE
+ select DVB_TUNER_ITD1000 if !DVB_FE_CUSTOMISE
+ select DVB_ISL6421 if !DVB_FE_CUSTOMISE
+ select DVB_CX24123 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
+ select DVB_TUNER_CX24113 if !DVB_FE_CUSTOMISE
+ help
+ Support for the digital TV receiver chip made by B2C2 Inc. included in
+ Technisats PCI cards and USB boxes.
+
+ Say Y if you own such a device and want to use it.
+
+config DVB_B2C2_FLEXCOP_PCI
+ tristate "Technisat/B2C2 Air/Sky/Cable2PC PCI"
+ depends on DVB_B2C2_FLEXCOP && PCI && I2C
+ help
+ Support for the Air/Sky/CableStar2 PCI card (DVB/ATSC) by Technisat/B2C2.
+
+ Say Y if you own such a device and want to use it.
+
+config DVB_B2C2_FLEXCOP_USB
+ tristate "Technisat/B2C2 Air/Sky/Cable2PC USB"
+ depends on DVB_B2C2_FLEXCOP && USB && I2C
+ help
+ Support for the Air/Sky/Cable2PC USB1.1 box (DVB/ATSC) by Technisat/B2C2,
+
+ Say Y if you own such a device and want to use it.
+
+config DVB_B2C2_FLEXCOP_DEBUG
+ bool "Enable debug for the B2C2 FlexCop drivers"
+ depends on DVB_B2C2_FLEXCOP
+ help
+ Say Y if you want to enable the module option to control debug messages
+ of all B2C2 FlexCop drivers.
diff --git a/drivers/media/pci/b2c2/Makefile b/drivers/media/pci/b2c2/Makefile
new file mode 100644
index 000000000000..7a1f5ce6d322
--- /dev/null
+++ b/drivers/media/pci/b2c2/Makefile
@@ -0,0 +1,16 @@
+b2c2-flexcop-objs = flexcop.o flexcop-fe-tuner.o flexcop-i2c.o \
+ flexcop-sram.o flexcop-eeprom.o flexcop-misc.o flexcop-hw-filter.o
+obj-$(CONFIG_DVB_B2C2_FLEXCOP) += b2c2-flexcop.o
+
+ifneq ($(CONFIG_DVB_B2C2_FLEXCOP_PCI),)
+b2c2-flexcop-objs += flexcop-dma.o
+endif
+
+b2c2-flexcop-pci-objs = flexcop-pci.o
+obj-$(CONFIG_DVB_B2C2_FLEXCOP_PCI) += b2c2-flexcop-pci.o
+
+b2c2-flexcop-usb-objs = flexcop-usb.o
+obj-$(CONFIG_DVB_B2C2_FLEXCOP_USB) += b2c2-flexcop-usb.o
+
+ccflags-y += -Idrivers/media/dvb-core/ -Idrivers/media/dvb-frontends/
+ccflags-y += -Idrivers/media/common/tuners/
diff --git a/drivers/media/pci/b2c2/flexcop-common.h b/drivers/media/pci/b2c2/flexcop-common.h
new file mode 100644
index 000000000000..437912e49824
--- /dev/null
+++ b/drivers/media/pci/b2c2/flexcop-common.h
@@ -0,0 +1,185 @@
+/*
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-common.h - common header file for device-specific source files
+ * see flexcop.c for copyright information
+ */
+#ifndef __FLEXCOP_COMMON_H__
+#define __FLEXCOP_COMMON_H__
+
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/mutex.h>
+
+#include "flexcop-reg.h"
+
+#include "dmxdev.h"
+#include "dvb_demux.h"
+#include "dvb_filter.h"
+#include "dvb_net.h"
+#include "dvb_frontend.h"
+
+#define FC_MAX_FEED 256
+
+#ifndef FC_LOG_PREFIX
+#warning please define a log prefix for your file, using a default one
+#define FC_LOG_PREFIX "b2c2-undef"
+#endif
+
+/* Steal from usb.h */
+#undef err
+#define err(format, arg...) \
+ printk(KERN_ERR FC_LOG_PREFIX ": " format "\n" , ## arg)
+#undef info
+#define info(format, arg...) \
+ printk(KERN_INFO FC_LOG_PREFIX ": " format "\n" , ## arg)
+#undef warn
+#define warn(format, arg...) \
+ printk(KERN_WARNING FC_LOG_PREFIX ": " format "\n" , ## arg)
+
+struct flexcop_dma {
+ struct pci_dev *pdev;
+
+ u8 *cpu_addr0;
+ dma_addr_t dma_addr0;
+ u8 *cpu_addr1;
+ dma_addr_t dma_addr1;
+ u32 size; /* size of each address in bytes */
+};
+
+struct flexcop_i2c_adapter {
+ struct flexcop_device *fc;
+ struct i2c_adapter i2c_adap;
+
+ u8 no_base_addr;
+ flexcop_i2c_port_t port;
+};
+
+/* Control structure for data definitions that are common to
+ * the B2C2-based PCI and USB devices.
+ */
+struct flexcop_device {
+ /* general */
+ struct device *dev; /* for firmware_class */
+
+#define FC_STATE_DVB_INIT 0x01
+#define FC_STATE_I2C_INIT 0x02
+#define FC_STATE_FE_INIT 0x04
+ int init_state;
+
+ /* device information */
+ int has_32_hw_pid_filter;
+ flexcop_revision_t rev;
+ flexcop_device_type_t dev_type;
+ flexcop_bus_t bus_type;
+
+ /* dvb stuff */
+ struct dvb_adapter dvb_adapter;
+ struct dvb_frontend *fe;
+ struct dvb_net dvbnet;
+ struct dvb_demux demux;
+ struct dmxdev dmxdev;
+ struct dmx_frontend hw_frontend;
+ struct dmx_frontend mem_frontend;
+ int (*fe_sleep) (struct dvb_frontend *);
+
+ struct flexcop_i2c_adapter fc_i2c_adap[3];
+ struct mutex i2c_mutex;
+ struct module *owner;
+
+ /* options and status */
+ int extra_feedcount;
+ int feedcount;
+ int pid_filtering;
+ int fullts_streaming_state;
+
+ /* bus specific callbacks */
+ flexcop_ibi_value(*read_ibi_reg) (struct flexcop_device *,
+ flexcop_ibi_register);
+ int (*write_ibi_reg) (struct flexcop_device *,
+ flexcop_ibi_register, flexcop_ibi_value);
+ int (*i2c_request) (struct flexcop_i2c_adapter *,
+ flexcop_access_op_t, u8 chipaddr, u8 addr, u8 *buf, u16 len);
+ int (*stream_control) (struct flexcop_device *, int);
+ int (*get_mac_addr) (struct flexcop_device *fc, int extended);
+ void *bus_specific;
+};
+
+/* exported prototypes */
+
+/* from flexcop.c */
+void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len);
+void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no);
+
+struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len);
+void flexcop_device_kfree(struct flexcop_device *);
+
+int flexcop_device_initialize(struct flexcop_device *);
+void flexcop_device_exit(struct flexcop_device *fc);
+void flexcop_reset_block_300(struct flexcop_device *fc);
+
+/* from flexcop-dma.c */
+int flexcop_dma_allocate(struct pci_dev *pdev,
+ struct flexcop_dma *dma, u32 size);
+void flexcop_dma_free(struct flexcop_dma *dma);
+
+int flexcop_dma_control_timer_irq(struct flexcop_device *fc,
+ flexcop_dma_index_t no, int onoff);
+int flexcop_dma_control_size_irq(struct flexcop_device *fc,
+ flexcop_dma_index_t no, int onoff);
+int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma,
+ flexcop_dma_index_t dma_idx);
+int flexcop_dma_xfer_control(struct flexcop_device *fc,
+ flexcop_dma_index_t dma_idx, flexcop_dma_addr_index_t index,
+ int onoff);
+int flexcop_dma_config_timer(struct flexcop_device *fc,
+ flexcop_dma_index_t dma_idx, u8 cycles);
+
+/* from flexcop-eeprom.c */
+/* the PCI part uses this call to get the MAC address, the USB part has its own */
+int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended);
+
+/* from flexcop-i2c.c */
+/* the PCI part uses this a i2c_request callback, whereas the usb part has its own
+ * one. We have it in flexcop-i2c.c, because it is going via the actual
+ * I2C-channel of the flexcop.
+ */
+int flexcop_i2c_request(struct flexcop_i2c_adapter*, flexcop_access_op_t,
+ u8 chipaddr, u8 addr, u8 *buf, u16 len);
+
+/* from flexcop-sram.c */
+int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest,
+ flexcop_sram_dest_target_t target);
+void flexcop_wan_set_speed(struct flexcop_device *fc, flexcop_wan_speed_t s);
+void flexcop_sram_ctrl(struct flexcop_device *fc,
+ int usb_wan, int sramdma, int maximumfill);
+
+/* global prototypes for the flexcop-chip */
+/* from flexcop-fe-tuner.c */
+int flexcop_frontend_init(struct flexcop_device *fc);
+void flexcop_frontend_exit(struct flexcop_device *fc);
+
+/* from flexcop-i2c.c */
+int flexcop_i2c_init(struct flexcop_device *fc);
+void flexcop_i2c_exit(struct flexcop_device *fc);
+
+/* from flexcop-sram.c */
+int flexcop_sram_init(struct flexcop_device *fc);
+
+/* from flexcop-misc.c */
+void flexcop_determine_revision(struct flexcop_device *fc);
+void flexcop_device_name(struct flexcop_device *fc,
+ const char *prefix, const char *suffix);
+void flexcop_dump_reg(struct flexcop_device *fc,
+ flexcop_ibi_register reg, int num);
+
+/* from flexcop-hw-filter.c */
+int flexcop_pid_feed_control(struct flexcop_device *fc,
+ struct dvb_demux_feed *dvbdmxfeed, int onoff);
+void flexcop_hw_filter_init(struct flexcop_device *fc);
+
+void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff);
+
+void flexcop_set_mac_filter(struct flexcop_device *fc, u8 mac[6]);
+void flexcop_mac_filter_ctrl(struct flexcop_device *fc, int onoff);
+
+#endif
diff --git a/drivers/media/pci/b2c2/flexcop-dma.c b/drivers/media/pci/b2c2/flexcop-dma.c
new file mode 100644
index 000000000000..2881e0d956ad
--- /dev/null
+++ b/drivers/media/pci/b2c2/flexcop-dma.c
@@ -0,0 +1,172 @@
+/*
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-dma.c - configuring and controlling the DMA of the FlexCop
+ * see flexcop.c for copyright information
+ */
+#include "flexcop.h"
+
+int flexcop_dma_allocate(struct pci_dev *pdev,
+ struct flexcop_dma *dma, u32 size)
+{
+ u8 *tcpu;
+ dma_addr_t tdma = 0;
+
+ if (size % 2) {
+ err("dma buffersize has to be even.");
+ return -EINVAL;
+ }
+
+ if ((tcpu = pci_alloc_consistent(pdev, size, &tdma)) != NULL) {
+ dma->pdev = pdev;
+ dma->cpu_addr0 = tcpu;
+ dma->dma_addr0 = tdma;
+ dma->cpu_addr1 = tcpu + size/2;
+ dma->dma_addr1 = tdma + size/2;
+ dma->size = size/2;
+ return 0;
+ }
+ return -ENOMEM;
+}
+EXPORT_SYMBOL(flexcop_dma_allocate);
+
+void flexcop_dma_free(struct flexcop_dma *dma)
+{
+ pci_free_consistent(dma->pdev, dma->size*2,
+ dma->cpu_addr0, dma->dma_addr0);
+ memset(dma,0,sizeof(struct flexcop_dma));
+}
+EXPORT_SYMBOL(flexcop_dma_free);
+
+int flexcop_dma_config(struct flexcop_device *fc,
+ struct flexcop_dma *dma,
+ flexcop_dma_index_t dma_idx)
+{
+ flexcop_ibi_value v0x0,v0x4,v0xc;
+ v0x0.raw = v0x4.raw = v0xc.raw = 0;
+
+ v0x0.dma_0x0.dma_address0 = dma->dma_addr0 >> 2;
+ v0xc.dma_0xc.dma_address1 = dma->dma_addr1 >> 2;
+ v0x4.dma_0x4_write.dma_addr_size = dma->size / 4;
+
+ if ((dma_idx & FC_DMA_1) == dma_idx) {
+ fc->write_ibi_reg(fc,dma1_000,v0x0);
+ fc->write_ibi_reg(fc,dma1_004,v0x4);
+ fc->write_ibi_reg(fc,dma1_00c,v0xc);
+ } else if ((dma_idx & FC_DMA_2) == dma_idx) {
+ fc->write_ibi_reg(fc,dma2_010,v0x0);
+ fc->write_ibi_reg(fc,dma2_014,v0x4);
+ fc->write_ibi_reg(fc,dma2_01c,v0xc);
+ } else {
+ err("either DMA1 or DMA2 can be configured within one "
+ "flexcop_dma_config call.");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(flexcop_dma_config);
+
+/* start the DMA transfers, but not the DMA IRQs */
+int flexcop_dma_xfer_control(struct flexcop_device *fc,
+ flexcop_dma_index_t dma_idx,
+ flexcop_dma_addr_index_t index,
+ int onoff)
+{
+ flexcop_ibi_value v0x0,v0xc;
+ flexcop_ibi_register r0x0,r0xc;
+
+ if ((dma_idx & FC_DMA_1) == dma_idx) {
+ r0x0 = dma1_000;
+ r0xc = dma1_00c;
+ } else if ((dma_idx & FC_DMA_2) == dma_idx) {
+ r0x0 = dma2_010;
+ r0xc = dma2_01c;
+ } else {
+ err("either transfer DMA1 or DMA2 can be started within one "
+ "flexcop_dma_xfer_control call.");
+ return -EINVAL;
+ }
+
+ v0x0 = fc->read_ibi_reg(fc,r0x0);
+ v0xc = fc->read_ibi_reg(fc,r0xc);
+
+ deb_rdump("reg: %03x: %x\n",r0x0,v0x0.raw);
+ deb_rdump("reg: %03x: %x\n",r0xc,v0xc.raw);
+
+ if (index & FC_DMA_SUBADDR_0)
+ v0x0.dma_0x0.dma_0start = onoff;
+
+ if (index & FC_DMA_SUBADDR_1)
+ v0xc.dma_0xc.dma_1start = onoff;
+
+ fc->write_ibi_reg(fc,r0x0,v0x0);
+ fc->write_ibi_reg(fc,r0xc,v0xc);
+
+ deb_rdump("reg: %03x: %x\n",r0x0,v0x0.raw);
+ deb_rdump("reg: %03x: %x\n",r0xc,v0xc.raw);
+ return 0;
+}
+EXPORT_SYMBOL(flexcop_dma_xfer_control);
+
+static int flexcop_dma_remap(struct flexcop_device *fc,
+ flexcop_dma_index_t dma_idx,
+ int onoff)
+{
+ flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_00c : dma2_01c;
+ flexcop_ibi_value v = fc->read_ibi_reg(fc,r);
+ deb_info("%s\n",__func__);
+ v.dma_0xc.remap_enable = onoff;
+ fc->write_ibi_reg(fc,r,v);
+ return 0;
+}
+
+int flexcop_dma_control_size_irq(struct flexcop_device *fc,
+ flexcop_dma_index_t no,
+ int onoff)
+{
+ flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208);
+
+ if (no & FC_DMA_1)
+ v.ctrl_208.DMA1_IRQ_Enable_sig = onoff;
+
+ if (no & FC_DMA_2)
+ v.ctrl_208.DMA2_IRQ_Enable_sig = onoff;
+
+ fc->write_ibi_reg(fc,ctrl_208,v);
+ return 0;
+}
+EXPORT_SYMBOL(flexcop_dma_control_size_irq);
+
+int flexcop_dma_control_timer_irq(struct flexcop_device *fc,
+ flexcop_dma_index_t no,
+ int onoff)
+{
+ flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208);
+
+ if (no & FC_DMA_1)
+ v.ctrl_208.DMA1_Timer_Enable_sig = onoff;
+
+ if (no & FC_DMA_2)
+ v.ctrl_208.DMA2_Timer_Enable_sig = onoff;
+
+ fc->write_ibi_reg(fc,ctrl_208,v);
+ return 0;
+}
+EXPORT_SYMBOL(flexcop_dma_control_timer_irq);
+
+/* 1 cycles = 1.97 msec */
+int flexcop_dma_config_timer(struct flexcop_device *fc,
+ flexcop_dma_index_t dma_idx, u8 cycles)
+{
+ flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014;
+ flexcop_ibi_value v = fc->read_ibi_reg(fc,r);
+
+ flexcop_dma_remap(fc,dma_idx,0);
+
+ deb_info("%s\n",__func__);
+ v.dma_0x4_write.dmatimer = cycles;
+ fc->write_ibi_reg(fc,r,v);
+ return 0;
+}
+EXPORT_SYMBOL(flexcop_dma_config_timer);
+
diff --git a/drivers/media/pci/b2c2/flexcop-eeprom.c b/drivers/media/pci/b2c2/flexcop-eeprom.c
new file mode 100644
index 000000000000..a25373a9bd84
--- /dev/null
+++ b/drivers/media/pci/b2c2/flexcop-eeprom.c
@@ -0,0 +1,147 @@
+/*
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-eeprom.c - eeprom access methods (currently only MAC address reading)
+ * see flexcop.c for copyright information
+ */
+#include "flexcop.h"
+
+#if 0
+/*EEPROM (Skystar2 has one "24LC08B" chip on board) */
+static int eeprom_write(struct adapter *adapter, u16 addr, u8 *buf, u16 len)
+{
+ return flex_i2c_write(adapter, 0x20000000, 0x50, addr, buf, len);
+}
+
+static int eeprom_lrc_write(struct adapter *adapter, u32 addr,
+ u32 len, u8 *wbuf, u8 *rbuf, int retries)
+{
+int i;
+
+for (i = 0; i < retries; i++) {
+ if (eeprom_write(adapter, addr, wbuf, len) == len) {
+ if (eeprom_lrc_read(adapter, addr, len, rbuf, retries) == 1)
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/* These functions could be used to unlock SkyStar2 cards. */
+
+static int eeprom_writeKey(struct adapter *adapter, u8 *key, u32 len)
+{
+ u8 rbuf[20];
+ u8 wbuf[20];
+
+ if (len != 16)
+ return 0;
+
+ memcpy(wbuf, key, len);
+ wbuf[16] = 0;
+ wbuf[17] = 0;
+ wbuf[18] = 0;
+ wbuf[19] = calc_lrc(wbuf, 19);
+ return eeprom_lrc_write(adapter, 0x3e4, 20, wbuf, rbuf, 4);
+}
+
+static int eeprom_readKey(struct adapter *adapter, u8 *key, u32 len)
+{
+ u8 buf[20];
+
+ if (len != 16)
+ return 0;
+
+ if (eeprom_lrc_read(adapter, 0x3e4, 20, buf, 4) == 0)
+ return 0;
+
+ memcpy(key, buf, len);
+ return 1;
+}
+
+static char eeprom_set_mac_addr(struct adapter *adapter, char type, u8 *mac)
+{
+ u8 tmp[8];
+
+ if (type != 0) {
+ tmp[0] = mac[0];
+ tmp[1] = mac[1];
+ tmp[2] = mac[2];
+ tmp[3] = mac[5];
+ tmp[4] = mac[6];
+ tmp[5] = mac[7];
+ } else {
+ tmp[0] = mac[0];
+ tmp[1] = mac[1];
+ tmp[2] = mac[2];
+ tmp[3] = mac[3];
+ tmp[4] = mac[4];
+ tmp[5] = mac[5];
+ }
+
+ tmp[6] = 0;
+ tmp[7] = calc_lrc(tmp, 7);
+
+ if (eeprom_write(adapter, 0x3f8, tmp, 8) == 8)
+ return 1;
+ return 0;
+}
+
+static int flexcop_eeprom_read(struct flexcop_device *fc,
+ u16 addr, u8 *buf, u16 len)
+{
+ return fc->i2c_request(fc,FC_READ,FC_I2C_PORT_EEPROM,0x50,addr,buf,len);
+}
+
+#endif
+
+static u8 calc_lrc(u8 *buf, int len)
+{
+ int i;
+ u8 sum = 0;
+ for (i = 0; i < len; i++)
+ sum = sum ^ buf[i];
+ return sum;
+}
+
+static int flexcop_eeprom_request(struct flexcop_device *fc,
+ flexcop_access_op_t op, u16 addr, u8 *buf, u16 len, int retries)
+{
+ int i,ret = 0;
+ u8 chipaddr = 0x50 | ((addr >> 8) & 3);
+ for (i = 0; i < retries; i++) {
+ ret = fc->i2c_request(&fc->fc_i2c_adap[1], op, chipaddr,
+ addr & 0xff, buf, len);
+ if (ret == 0)
+ break;
+ }
+ return ret;
+}
+
+static int flexcop_eeprom_lrc_read(struct flexcop_device *fc, u16 addr,
+ u8 *buf, u16 len, int retries)
+{
+ int ret = flexcop_eeprom_request(fc, FC_READ, addr, buf, len, retries);
+ if (ret == 0)
+ if (calc_lrc(buf, len - 1) != buf[len - 1])
+ ret = -EINVAL;
+ return ret;
+}
+
+/* JJ's comment about extended == 1: it is not presently used anywhere but was
+ * added to the low-level functions for possible support of EUI64 */
+int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended)
+{
+ u8 buf[8];
+ int ret = 0;
+
+ if ((ret = flexcop_eeprom_lrc_read(fc,0x3f8,buf,8,4)) == 0) {
+ if (extended != 0) {
+ err("TODO: extended (EUI64) MAC addresses aren't "
+ "completely supported yet");
+ ret = -EINVAL;
+ } else
+ memcpy(fc->dvb_adapter.proposed_mac,buf,6);
+ }
+ return ret;
+}
+EXPORT_SYMBOL(flexcop_eeprom_check_mac_addr);
diff --git a/drivers/media/pci/b2c2/flexcop-fe-tuner.c b/drivers/media/pci/b2c2/flexcop-fe-tuner.c
new file mode 100644
index 000000000000..850a6c606750
--- /dev/null
+++ b/drivers/media/pci/b2c2/flexcop-fe-tuner.c
@@ -0,0 +1,678 @@
+/*
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-fe-tuner.c - methods for frontend attachment and DiSEqC controlling
+ * see flexcop.c for copyright information
+ */
+#include <media/tuner.h>
+#include "flexcop.h"
+#include "mt312.h"
+#include "stv0299.h"
+#include "s5h1420.h"
+#include "itd1000.h"
+#include "cx24113.h"
+#include "cx24123.h"
+#include "isl6421.h"
+#include "mt352.h"
+#include "bcm3510.h"
+#include "nxt200x.h"
+#include "dvb-pll.h"
+#include "lgdt330x.h"
+#include "tuner-simple.h"
+#include "stv0297.h"
+
+
+/* Can we use the specified front-end? Remember that if we are compiled
+ * into the kernel we can't call code that's in modules. */
+#define FE_SUPPORTED(fe) (defined(CONFIG_DVB_##fe) || \
+ (defined(CONFIG_DVB_##fe##_MODULE) && defined(MODULE)))
+
+/* lnb control */
+#if FE_SUPPORTED(MT312) || FE_SUPPORTED(STV0299)
+static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+ struct flexcop_device *fc = fe->dvb->priv;
+ flexcop_ibi_value v;
+ deb_tuner("polarity/voltage = %u\n", voltage);
+
+ v = fc->read_ibi_reg(fc, misc_204);
+ switch (voltage) {
+ case SEC_VOLTAGE_OFF:
+ v.misc_204.ACPI1_sig = 1;
+ break;
+ case SEC_VOLTAGE_13:
+ v.misc_204.ACPI1_sig = 0;
+ v.misc_204.LNB_L_H_sig = 0;
+ break;
+ case SEC_VOLTAGE_18:
+ v.misc_204.ACPI1_sig = 0;
+ v.misc_204.LNB_L_H_sig = 1;
+ break;
+ default:
+ err("unknown SEC_VOLTAGE value");
+ return -EINVAL;
+ }
+ return fc->write_ibi_reg(fc, misc_204, v);
+}
+#endif
+
+#if FE_SUPPORTED(S5H1420) || FE_SUPPORTED(STV0299) || FE_SUPPORTED(MT312)
+static int flexcop_sleep(struct dvb_frontend* fe)
+{
+ struct flexcop_device *fc = fe->dvb->priv;
+ if (fc->fe_sleep)
+ return fc->fe_sleep(fe);
+ return 0;
+}
+#endif
+
+/* SkyStar2 DVB-S rev 2.3 */
+#if FE_SUPPORTED(MT312) && FE_SUPPORTED(PLL)
+static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
+{
+/* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
+ struct flexcop_device *fc = fe->dvb->priv;
+ flexcop_ibi_value v;
+ u16 ax;
+ v.raw = 0;
+ deb_tuner("tone = %u\n",tone);
+
+ switch (tone) {
+ case SEC_TONE_ON:
+ ax = 0x01ff;
+ break;
+ case SEC_TONE_OFF:
+ ax = 0;
+ break;
+ default:
+ err("unknown SEC_TONE value");
+ return -EINVAL;
+ }
+
+ v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */
+ v.lnb_switch_freq_200.LNB_CTLHighCount_sig = ax;
+ v.lnb_switch_freq_200.LNB_CTLLowCount_sig = ax == 0 ? 0x1ff : ax;
+ return fc->write_ibi_reg(fc,lnb_switch_freq_200,v);
+}
+
+static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data)
+{
+ flexcop_set_tone(fe, SEC_TONE_ON);
+ udelay(data ? 500 : 1000);
+ flexcop_set_tone(fe, SEC_TONE_OFF);
+ udelay(data ? 1000 : 500);
+}
+
+static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data)
+{
+ int i, par = 1, d;
+ for (i = 7; i >= 0; i--) {
+ d = (data >> i) & 1;
+ par ^= d;
+ flexcop_diseqc_send_bit(fe, d);
+ }
+ flexcop_diseqc_send_bit(fe, par);
+}
+
+static int flexcop_send_diseqc_msg(struct dvb_frontend *fe,
+ int len, u8 *msg, unsigned long burst)
+{
+ int i;
+
+ flexcop_set_tone(fe, SEC_TONE_OFF);
+ mdelay(16);
+
+ for (i = 0; i < len; i++)
+ flexcop_diseqc_send_byte(fe,msg[i]);
+ mdelay(16);
+
+ if (burst != -1) {
+ if (burst)
+ flexcop_diseqc_send_byte(fe, 0xff);
+ else {
+ flexcop_set_tone(fe, SEC_TONE_ON);
+ mdelay(12);
+ udelay(500);
+ flexcop_set_tone(fe, SEC_TONE_OFF);
+ }
+ msleep(20);
+ }
+ return 0;
+}
+
+static int flexcop_diseqc_send_master_cmd(struct dvb_frontend *fe,
+ struct dvb_diseqc_master_cmd *cmd)
+{
+ return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0);
+}
+
+static int flexcop_diseqc_send_burst(struct dvb_frontend *fe,
+ fe_sec_mini_cmd_t minicmd)
+{
+ return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd);
+}
+
+static struct mt312_config skystar23_samsung_tbdu18132_config = {
+ .demod_address = 0x0e,
+};
+
+static int skystar2_rev23_attach(struct flexcop_device *fc,
+ struct i2c_adapter *i2c)
+{
+ struct dvb_frontend_ops *ops;
+
+ fc->fe = dvb_attach(mt312_attach, &skystar23_samsung_tbdu18132_config, i2c);
+ if (!fc->fe)
+ return 0;
+
+ if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61, i2c,
+ DVB_PLL_SAMSUNG_TBDU18132))
+ return 0;
+
+ ops = &fc->fe->ops;
+ ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
+ ops->diseqc_send_burst = flexcop_diseqc_send_burst;
+ ops->set_tone = flexcop_set_tone;
+ ops->set_voltage = flexcop_set_voltage;
+ fc->fe_sleep = ops->sleep;
+ ops->sleep = flexcop_sleep;
+ return 1;
+}
+#else
+#define skystar2_rev23_attach NULL
+#endif
+
+/* SkyStar2 DVB-S rev 2.6 */
+#if FE_SUPPORTED(STV0299) && FE_SUPPORTED(PLL)
+static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe,
+ u32 srate, u32 ratio)
+{
+ u8 aclk = 0;
+ u8 bclk = 0;
+
+ if (srate < 1500000) {
+ aclk = 0xb7; bclk = 0x47;
+ } else if (srate < 3000000) {
+ aclk = 0xb7; bclk = 0x4b;
+ } else if (srate < 7000000) {
+ aclk = 0xb7; bclk = 0x4f;
+ } else if (srate < 14000000) {
+ aclk = 0xb7; bclk = 0x53;
+ } else if (srate < 30000000) {
+ aclk = 0xb6; bclk = 0x53;
+ } else if (srate < 45000000) {
+ aclk = 0xb4; bclk = 0x51;
+ }
+
+ stv0299_writereg(fe, 0x13, aclk);
+ stv0299_writereg(fe, 0x14, bclk);
+ stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+ stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+ stv0299_writereg(fe, 0x21, ratio & 0xf0);
+ return 0;
+}
+
+static u8 samsung_tbmu24112_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x30,
+ 0x03, 0x00,
+ 0x04, 0x7D,
+ 0x05, 0x35,
+ 0x06, 0x02,
+ 0x07, 0x00,
+ 0x08, 0xC3,
+ 0x0C, 0x00,
+ 0x0D, 0x81,
+ 0x0E, 0x23,
+ 0x0F, 0x12,
+ 0x10, 0x7E,
+ 0x11, 0x84,
+ 0x12, 0xB9,
+ 0x13, 0x88,
+ 0x14, 0x89,
+ 0x15, 0xC9,
+ 0x16, 0x00,
+ 0x17, 0x5C,
+ 0x18, 0x00,
+ 0x19, 0x00,
+ 0x1A, 0x00,
+ 0x1C, 0x00,
+ 0x1D, 0x00,
+ 0x1E, 0x00,
+ 0x1F, 0x3A,
+ 0x20, 0x2E,
+ 0x21, 0x80,
+ 0x22, 0xFF,
+ 0x23, 0xC1,
+ 0x28, 0x00,
+ 0x29, 0x1E,
+ 0x2A, 0x14,
+ 0x2B, 0x0F,
+ 0x2C, 0x09,
+ 0x2D, 0x05,
+ 0x31, 0x1F,
+ 0x32, 0x19,
+ 0x33, 0xFE,
+ 0x34, 0x93,
+ 0xff, 0xff,
+};
+
+static struct stv0299_config samsung_tbmu24112_config = {
+ .demod_address = 0x68,
+ .inittab = samsung_tbmu24112_inittab,
+ .mclk = 88000000UL,
+ .invert = 0,
+ .skip_reinit = 0,
+ .lock_output = STV0299_LOCKOUTPUT_LK,
+ .volt13_op0_op1 = STV0299_VOLT13_OP1,
+ .min_delay_ms = 100,
+ .set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
+};
+
+static int skystar2_rev26_attach(struct flexcop_device *fc,
+ struct i2c_adapter *i2c)
+{
+ fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c);
+ if (!fc->fe)
+ return 0;
+
+ if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61, i2c,
+ DVB_PLL_SAMSUNG_TBMU24112))
+ return 0;
+
+ fc->fe->ops.set_voltage = flexcop_set_voltage;
+ fc->fe_sleep = fc->fe->ops.sleep;
+ fc->fe->ops.sleep = flexcop_sleep;
+ return 1;
+
+}
+#else
+#define skystar2_rev26_attach NULL
+#endif
+
+/* SkyStar2 DVB-S rev 2.7 */
+#if FE_SUPPORTED(S5H1420) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_ITD1000)
+static struct s5h1420_config skystar2_rev2_7_s5h1420_config = {
+ .demod_address = 0x53,
+ .invert = 1,
+ .repeated_start_workaround = 1,
+ .serial_mpeg = 1,
+};
+
+static struct itd1000_config skystar2_rev2_7_itd1000_config = {
+ .i2c_address = 0x61,
+};
+
+static int skystar2_rev27_attach(struct flexcop_device *fc,
+ struct i2c_adapter *i2c)
+{
+ flexcop_ibi_value r108;
+ struct i2c_adapter *i2c_tuner;
+
+ /* enable no_base_addr - no repeated start when reading */
+ fc->fc_i2c_adap[0].no_base_addr = 1;
+ fc->fe = dvb_attach(s5h1420_attach, &skystar2_rev2_7_s5h1420_config,
+ i2c);
+ if (!fc->fe)
+ goto fail;
+
+ i2c_tuner = s5h1420_get_tuner_i2c_adapter(fc->fe);
+ if (!i2c_tuner)
+ goto fail;
+
+ fc->fe_sleep = fc->fe->ops.sleep;
+ fc->fe->ops.sleep = flexcop_sleep;
+
+ /* enable no_base_addr - no repeated start when reading */
+ fc->fc_i2c_adap[2].no_base_addr = 1;
+ if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap,
+ 0x08, 1, 1)) {
+ err("ISL6421 could NOT be attached");
+ goto fail_isl;
+ }
+ info("ISL6421 successfully attached");
+
+ /* the ITD1000 requires a lower i2c clock - is it a problem ? */
+ r108.raw = 0x00000506;
+ fc->write_ibi_reg(fc, tw_sm_c_108, r108);
+ if (!dvb_attach(itd1000_attach, fc->fe, i2c_tuner,
+ &skystar2_rev2_7_itd1000_config)) {
+ err("ITD1000 could NOT be attached");
+ /* Should i2c clock be restored? */
+ goto fail_isl;
+ }
+ info("ITD1000 successfully attached");
+
+ return 1;
+
+fail_isl:
+ fc->fc_i2c_adap[2].no_base_addr = 0;
+fail:
+ /* for the next devices we need it again */
+ fc->fc_i2c_adap[0].no_base_addr = 0;
+ return 0;
+}
+#else
+#define skystar2_rev27_attach NULL
+#endif
+
+/* SkyStar2 rev 2.8 */
+#if FE_SUPPORTED(CX24123) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_CX24113)
+static struct cx24123_config skystar2_rev2_8_cx24123_config = {
+ .demod_address = 0x55,
+ .dont_use_pll = 1,
+ .agc_callback = cx24113_agc_callback,
+};
+
+static const struct cx24113_config skystar2_rev2_8_cx24113_config = {
+ .i2c_addr = 0x54,
+ .xtal_khz = 10111,
+};
+
+static int skystar2_rev28_attach(struct flexcop_device *fc,
+ struct i2c_adapter *i2c)
+{
+ struct i2c_adapter *i2c_tuner;
+
+ fc->fe = dvb_attach(cx24123_attach, &skystar2_rev2_8_cx24123_config,
+ i2c);
+ if (!fc->fe)
+ return 0;
+
+ i2c_tuner = cx24123_get_tuner_i2c_adapter(fc->fe);
+ if (!i2c_tuner)
+ return 0;
+
+ if (!dvb_attach(cx24113_attach, fc->fe, &skystar2_rev2_8_cx24113_config,
+ i2c_tuner)) {
+ err("CX24113 could NOT be attached");
+ return 0;
+ }
+ info("CX24113 successfully attached");
+
+ fc->fc_i2c_adap[2].no_base_addr = 1;
+ if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap,
+ 0x08, 0, 0)) {
+ err("ISL6421 could NOT be attached");
+ fc->fc_i2c_adap[2].no_base_addr = 0;
+ return 0;
+ }
+ info("ISL6421 successfully attached");
+ /* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an
+ * IR-receiver (PIC16F818) - but the card has no input for that ??? */
+ return 1;
+}
+#else
+#define skystar2_rev28_attach NULL
+#endif
+
+/* AirStar DVB-T */
+#if FE_SUPPORTED(MT352) && FE_SUPPORTED(PLL)
+static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe)
+{
+ static u8 mt352_clock_config[] = { 0x89, 0x18, 0x2d };
+ static u8 mt352_reset[] = { 0x50, 0x80 };
+ static u8 mt352_adc_ctl_1_cfg[] = { 0x8E, 0x40 };
+ static u8 mt352_agc_cfg[] = { 0x67, 0x28, 0xa1 };
+ static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
+
+ mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
+ udelay(2000);
+ mt352_write(fe, mt352_reset, sizeof(mt352_reset));
+ mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
+ mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
+ mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
+ return 0;
+}
+
+static struct mt352_config samsung_tdtc9251dh0_config = {
+ .demod_address = 0x0f,
+ .demod_init = samsung_tdtc9251dh0_demod_init,
+};
+
+static int airstar_dvbt_attach(struct flexcop_device *fc,
+ struct i2c_adapter *i2c)
+{
+ fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c);
+ if (!fc->fe)
+ return 0;
+
+ return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL,
+ DVB_PLL_SAMSUNG_TDTC9251DH0);
+}
+#else
+#define airstar_dvbt_attach NULL
+#endif
+
+/* AirStar ATSC 1st generation */
+#if FE_SUPPORTED(BCM3510)
+static int flexcop_fe_request_firmware(struct dvb_frontend *fe,
+ const struct firmware **fw, char* name)
+{
+ struct flexcop_device *fc = fe->dvb->priv;
+ return request_firmware(fw, name, fc->dev);
+}
+
+static struct bcm3510_config air2pc_atsc_first_gen_config = {
+ .demod_address = 0x0f,
+ .request_firmware = flexcop_fe_request_firmware,
+};
+
+static int airstar_atsc1_attach(struct flexcop_device *fc,
+ struct i2c_adapter *i2c)
+{
+ fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c);
+ return fc->fe != NULL;
+}
+#else
+#define airstar_atsc1_attach NULL
+#endif
+
+/* AirStar ATSC 2nd generation */
+#if FE_SUPPORTED(NXT200X) && FE_SUPPORTED(PLL)
+static struct nxt200x_config samsung_tbmv_config = {
+ .demod_address = 0x0a,
+};
+
+static int airstar_atsc2_attach(struct flexcop_device *fc,
+ struct i2c_adapter *i2c)
+{
+ fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c);
+ if (!fc->fe)
+ return 0;
+
+ return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL,
+ DVB_PLL_SAMSUNG_TBMV);
+}
+#else
+#define airstar_atsc2_attach NULL
+#endif
+
+/* AirStar ATSC 3rd generation */
+#if FE_SUPPORTED(LGDT330X)
+static struct lgdt330x_config air2pc_atsc_hd5000_config = {
+ .demod_address = 0x59,
+ .demod_chip = LGDT3303,
+ .serial_mpeg = 0x04,
+ .clock_polarity_flip = 1,
+};
+
+static int airstar_atsc3_attach(struct flexcop_device *fc,
+ struct i2c_adapter *i2c)
+{
+ fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, i2c);
+ if (!fc->fe)
+ return 0;
+
+ return !!dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
+ TUNER_LG_TDVS_H06XF);
+}
+#else
+#define airstar_atsc3_attach NULL
+#endif
+
+/* CableStar2 DVB-C */
+#if FE_SUPPORTED(STV0297) && FE_SUPPORTED(PLL)
+static u8 alps_tdee4_stv0297_inittab[] = {
+ 0x80, 0x01,
+ 0x80, 0x00,
+ 0x81, 0x01,
+ 0x81, 0x00,
+ 0x00, 0x48,
+ 0x01, 0x58,
+ 0x03, 0x00,
+ 0x04, 0x00,
+ 0x07, 0x00,
+ 0x08, 0x00,
+ 0x30, 0xff,
+ 0x31, 0x9d,
+ 0x32, 0xff,
+ 0x33, 0x00,
+ 0x34, 0x29,
+ 0x35, 0x55,
+ 0x36, 0x80,
+ 0x37, 0x6e,
+ 0x38, 0x9c,
+ 0x40, 0x1a,
+ 0x41, 0xfe,
+ 0x42, 0x33,
+ 0x43, 0x00,
+ 0x44, 0xff,
+ 0x45, 0x00,
+ 0x46, 0x00,
+ 0x49, 0x04,
+ 0x4a, 0x51,
+ 0x4b, 0xf8,
+ 0x52, 0x30,
+ 0x53, 0x06,
+ 0x59, 0x06,
+ 0x5a, 0x5e,
+ 0x5b, 0x04,
+ 0x61, 0x49,
+ 0x62, 0x0a,
+ 0x70, 0xff,
+ 0x71, 0x04,
+ 0x72, 0x00,
+ 0x73, 0x00,
+ 0x74, 0x0c,
+ 0x80, 0x20,
+ 0x81, 0x00,
+ 0x82, 0x30,
+ 0x83, 0x00,
+ 0x84, 0x04,
+ 0x85, 0x22,
+ 0x86, 0x08,
+ 0x87, 0x1b,
+ 0x88, 0x00,
+ 0x89, 0x00,
+ 0x90, 0x00,
+ 0x91, 0x04,
+ 0xa0, 0x86,
+ 0xa1, 0x00,
+ 0xa2, 0x00,
+ 0xb0, 0x91,
+ 0xb1, 0x0b,
+ 0xc0, 0x5b,
+ 0xc1, 0x10,
+ 0xc2, 0x12,
+ 0xd0, 0x02,
+ 0xd1, 0x00,
+ 0xd2, 0x00,
+ 0xd3, 0x00,
+ 0xd4, 0x02,
+ 0xd5, 0x00,
+ 0xde, 0x00,
+ 0xdf, 0x01,
+ 0xff, 0xff,
+};
+
+static struct stv0297_config alps_tdee4_stv0297_config = {
+ .demod_address = 0x1c,
+ .inittab = alps_tdee4_stv0297_inittab,
+};
+
+static int cablestar2_attach(struct flexcop_device *fc,
+ struct i2c_adapter *i2c)
+{
+ fc->fc_i2c_adap[0].no_base_addr = 1;
+ fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c);
+ if (!fc->fe)
+ goto fail;
+
+ /* This tuner doesn't use the stv0297's I2C gate, but instead the
+ * tuner is connected to a different flexcop I2C adapter. */
+ if (fc->fe->ops.i2c_gate_ctrl)
+ fc->fe->ops.i2c_gate_ctrl(fc->fe, 0);
+ fc->fe->ops.i2c_gate_ctrl = NULL;
+
+ if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61,
+ &fc->fc_i2c_adap[2].i2c_adap, DVB_PLL_TDEE4))
+ goto fail;
+
+ return 1;
+
+fail:
+ /* Reset for next frontend to try */
+ fc->fc_i2c_adap[0].no_base_addr = 0;
+ return 0;
+}
+#else
+#define cablestar2_attach NULL
+#endif
+
+static struct {
+ flexcop_device_type_t type;
+ int (*attach)(struct flexcop_device *, struct i2c_adapter *);
+} flexcop_frontends[] = {
+ { FC_SKY_REV27, skystar2_rev27_attach },
+ { FC_SKY_REV28, skystar2_rev28_attach },
+ { FC_SKY_REV26, skystar2_rev26_attach },
+ { FC_AIR_DVBT, airstar_dvbt_attach },
+ { FC_AIR_ATSC2, airstar_atsc2_attach },
+ { FC_AIR_ATSC3, airstar_atsc3_attach },
+ { FC_AIR_ATSC1, airstar_atsc1_attach },
+ { FC_CABLE, cablestar2_attach },
+ { FC_SKY_REV23, skystar2_rev23_attach },
+};
+
+/* try to figure out the frontend */
+int flexcop_frontend_init(struct flexcop_device *fc)
+{
+ int i;
+ for (i = 0; i < ARRAY_SIZE(flexcop_frontends); i++) {
+ if (!flexcop_frontends[i].attach)
+ continue;
+ /* type needs to be set before, because of some workarounds
+ * done based on the probed card type */
+ fc->dev_type = flexcop_frontends[i].type;
+ if (flexcop_frontends[i].attach(fc, &fc->fc_i2c_adap[0].i2c_adap))
+ goto fe_found;
+ /* Clean up partially attached frontend */
+ if (fc->fe) {
+ dvb_frontend_detach(fc->fe);
+ fc->fe = NULL;
+ }
+ }
+ fc->dev_type = FC_UNK;
+ err("no frontend driver found for this B2C2/FlexCop adapter");
+ return -ENODEV;
+
+fe_found:
+ info("found '%s' .", fc->fe->ops.info.name);
+ if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) {
+ err("frontend registration failed!");
+ dvb_frontend_detach(fc->fe);
+ fc->fe = NULL;
+ return -EINVAL;
+ }
+ fc->init_state |= FC_STATE_FE_INIT;
+ return 0;
+}
+
+void flexcop_frontend_exit(struct flexcop_device *fc)
+{
+ if (fc->init_state & FC_STATE_FE_INIT) {
+ dvb_unregister_frontend(fc->fe);
+ dvb_frontend_detach(fc->fe);
+ }
+ fc->init_state &= ~FC_STATE_FE_INIT;
+}
diff --git a/drivers/media/pci/b2c2/flexcop-hw-filter.c b/drivers/media/pci/b2c2/flexcop-hw-filter.c
new file mode 100644
index 000000000000..77e45475f4c7
--- /dev/null
+++ b/drivers/media/pci/b2c2/flexcop-hw-filter.c
@@ -0,0 +1,232 @@
+/*
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-hw-filter.c - pid and mac address filtering and control functions
+ * see flexcop.c for copyright information
+ */
+#include "flexcop.h"
+
+static void flexcop_rcv_data_ctrl(struct flexcop_device *fc, int onoff)
+{
+ flexcop_set_ibi_value(ctrl_208, Rcv_Data_sig, onoff);
+ deb_ts("rcv_data is now: '%s'\n", onoff ? "on" : "off");
+}
+
+void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff)
+{
+ flexcop_set_ibi_value(ctrl_208, SMC_Enable_sig, onoff);
+}
+
+static void flexcop_null_filter_ctrl(struct flexcop_device *fc, int onoff)
+{
+ flexcop_set_ibi_value(ctrl_208, Null_filter_sig, onoff);
+}
+
+void flexcop_set_mac_filter(struct flexcop_device *fc, u8 mac[6])
+{
+ flexcop_ibi_value v418, v41c;
+ v41c = fc->read_ibi_reg(fc, mac_address_41c);
+
+ v418.mac_address_418.MAC1 = mac[0];
+ v418.mac_address_418.MAC2 = mac[1];
+ v418.mac_address_418.MAC3 = mac[2];
+ v418.mac_address_418.MAC6 = mac[3];
+ v41c.mac_address_41c.MAC7 = mac[4];
+ v41c.mac_address_41c.MAC8 = mac[5];
+
+ fc->write_ibi_reg(fc, mac_address_418, v418);
+ fc->write_ibi_reg(fc, mac_address_41c, v41c);
+}
+
+void flexcop_mac_filter_ctrl(struct flexcop_device *fc, int onoff)
+{
+ flexcop_set_ibi_value(ctrl_208, MAC_filter_Mode_sig, onoff);
+}
+
+static void flexcop_pid_group_filter(struct flexcop_device *fc,
+ u16 pid, u16 mask)
+{
+ /* index_reg_310.extra_index_reg need to 0 or 7 to work */
+ flexcop_ibi_value v30c;
+ v30c.pid_filter_30c_ext_ind_0_7.Group_PID = pid;
+ v30c.pid_filter_30c_ext_ind_0_7.Group_mask = mask;
+ fc->write_ibi_reg(fc, pid_filter_30c, v30c);
+}
+
+static void flexcop_pid_group_filter_ctrl(struct flexcop_device *fc, int onoff)
+{
+ flexcop_set_ibi_value(ctrl_208, Mask_filter_sig, onoff);
+}
+
+/* this fancy define reduces the code size of the quite similar PID controlling of
+ * the first 6 PIDs
+ */
+
+#define pid_ctrl(vregname,field,enablefield,trans_field,transval) \
+ flexcop_ibi_value vpid = fc->read_ibi_reg(fc, vregname), \
+v208 = fc->read_ibi_reg(fc, ctrl_208); \
+vpid.vregname.field = onoff ? pid : 0x1fff; \
+vpid.vregname.trans_field = transval; \
+v208.ctrl_208.enablefield = onoff; \
+fc->write_ibi_reg(fc, vregname, vpid); \
+fc->write_ibi_reg(fc, ctrl_208, v208);
+
+static void flexcop_pid_Stream1_PID_ctrl(struct flexcop_device *fc,
+ u16 pid, int onoff)
+{
+ pid_ctrl(pid_filter_300, Stream1_PID, Stream1_filter_sig,
+ Stream1_trans, 0);
+}
+
+static void flexcop_pid_Stream2_PID_ctrl(struct flexcop_device *fc,
+ u16 pid, int onoff)
+{
+ pid_ctrl(pid_filter_300, Stream2_PID, Stream2_filter_sig,
+ Stream2_trans, 0);
+}
+
+static void flexcop_pid_PCR_PID_ctrl(struct flexcop_device *fc,
+ u16 pid, int onoff)
+{
+ pid_ctrl(pid_filter_304, PCR_PID, PCR_filter_sig, PCR_trans, 0);
+}
+
+static void flexcop_pid_PMT_PID_ctrl(struct flexcop_device *fc,
+ u16 pid, int onoff)
+{
+ pid_ctrl(pid_filter_304, PMT_PID, PMT_filter_sig, PMT_trans, 0);
+}
+
+static void flexcop_pid_EMM_PID_ctrl(struct flexcop_device *fc,
+ u16 pid, int onoff)
+{
+ pid_ctrl(pid_filter_308, EMM_PID, EMM_filter_sig, EMM_trans, 0);
+}
+
+static void flexcop_pid_ECM_PID_ctrl(struct flexcop_device *fc,
+ u16 pid, int onoff)
+{
+ pid_ctrl(pid_filter_308, ECM_PID, ECM_filter_sig, ECM_trans, 0);
+}
+
+static void flexcop_pid_control(struct flexcop_device *fc,
+ int index, u16 pid, int onoff)
+{
+ if (pid == 0x2000)
+ return;
+
+ deb_ts("setting pid: %5d %04x at index %d '%s'\n",
+ pid, pid, index, onoff ? "on" : "off");
+
+ /* We could use bit magic here to reduce source code size.
+ * I decided against it, but to use the real register names */
+ switch (index) {
+ case 0:
+ flexcop_pid_Stream1_PID_ctrl(fc, pid, onoff);
+ break;
+ case 1:
+ flexcop_pid_Stream2_PID_ctrl(fc, pid, onoff);
+ break;
+ case 2:
+ flexcop_pid_PCR_PID_ctrl(fc, pid, onoff);
+ break;
+ case 3:
+ flexcop_pid_PMT_PID_ctrl(fc, pid, onoff);
+ break;
+ case 4:
+ flexcop_pid_EMM_PID_ctrl(fc, pid, onoff);
+ break;
+ case 5:
+ flexcop_pid_ECM_PID_ctrl(fc, pid, onoff);
+ break;
+ default:
+ if (fc->has_32_hw_pid_filter && index < 38) {
+ flexcop_ibi_value vpid, vid;
+
+ /* set the index */
+ vid = fc->read_ibi_reg(fc, index_reg_310);
+ vid.index_reg_310.index_reg = index - 6;
+ fc->write_ibi_reg(fc, index_reg_310, vid);
+
+ vpid = fc->read_ibi_reg(fc, pid_n_reg_314);
+ vpid.pid_n_reg_314.PID = onoff ? pid : 0x1fff;
+ vpid.pid_n_reg_314.PID_enable_bit = onoff;
+ fc->write_ibi_reg(fc, pid_n_reg_314, vpid);
+ }
+ break;
+ }
+}
+
+static int flexcop_toggle_fullts_streaming(struct flexcop_device *fc, int onoff)
+{
+ if (fc->fullts_streaming_state != onoff) {
+ deb_ts("%s full TS transfer\n",onoff ? "enabling" : "disabling");
+ flexcop_pid_group_filter(fc, 0, 0x1fe0 * (!onoff));
+ flexcop_pid_group_filter_ctrl(fc, onoff);
+ fc->fullts_streaming_state = onoff;
+ }
+ return 0;
+}
+
+int flexcop_pid_feed_control(struct flexcop_device *fc,
+ struct dvb_demux_feed *dvbdmxfeed, int onoff)
+{
+ int max_pid_filter = 6 + fc->has_32_hw_pid_filter*32;
+
+ fc->feedcount += onoff ? 1 : -1; /* the number of PIDs/Feed currently requested */
+ if (dvbdmxfeed->index >= max_pid_filter)
+ fc->extra_feedcount += onoff ? 1 : -1;
+
+ /* toggle complete-TS-streaming when:
+ * - pid_filtering is not enabled and it is the first or last feed requested
+ * - pid_filtering is enabled,
+ * - but the number of requested feeds is exceeded
+ * - or the requested pid is 0x2000 */
+
+ if (!fc->pid_filtering && fc->feedcount == onoff)
+ flexcop_toggle_fullts_streaming(fc, onoff);
+
+ if (fc->pid_filtering) {
+ flexcop_pid_control \
+ (fc, dvbdmxfeed->index, dvbdmxfeed->pid, onoff);
+
+ if (fc->extra_feedcount > 0)
+ flexcop_toggle_fullts_streaming(fc, 1);
+ else if (dvbdmxfeed->pid == 0x2000)
+ flexcop_toggle_fullts_streaming(fc, onoff);
+ else
+ flexcop_toggle_fullts_streaming(fc, 0);
+ }
+
+ /* if it was the first or last feed request change the stream-status */
+ if (fc->feedcount == onoff) {
+ flexcop_rcv_data_ctrl(fc, onoff);
+ if (fc->stream_control) /* device specific stream control */
+ fc->stream_control(fc, onoff);
+
+ /* feeding stopped -> reset the flexcop filter*/
+ if (onoff == 0) {
+ flexcop_reset_block_300(fc);
+ flexcop_hw_filter_init(fc);
+ }
+ }
+ return 0;
+}
+EXPORT_SYMBOL(flexcop_pid_feed_control);
+
+void flexcop_hw_filter_init(struct flexcop_device *fc)
+{
+ int i;
+ flexcop_ibi_value v;
+ for (i = 0; i < 6 + 32*fc->has_32_hw_pid_filter; i++)
+ flexcop_pid_control(fc, i, 0x1fff, 0);
+
+ flexcop_pid_group_filter(fc, 0, 0x1fe0);
+ flexcop_pid_group_filter_ctrl(fc, 0);
+
+ v = fc->read_ibi_reg(fc, pid_filter_308);
+ v.pid_filter_308.EMM_filter_4 = 1;
+ v.pid_filter_308.EMM_filter_6 = 0;
+ fc->write_ibi_reg(fc, pid_filter_308, v);
+
+ flexcop_null_filter_ctrl(fc, 1);
+}
diff --git a/drivers/media/pci/b2c2/flexcop-i2c.c b/drivers/media/pci/b2c2/flexcop-i2c.c
new file mode 100644
index 000000000000..965d5eb33752
--- /dev/null
+++ b/drivers/media/pci/b2c2/flexcop-i2c.c
@@ -0,0 +1,288 @@
+/*
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-i2c.c - flexcop internal 2Wire bus (I2C) and dvb i2c initialization
+ * see flexcop.c for copyright information
+ */
+#include "flexcop.h"
+
+#define FC_MAX_I2C_RETRIES 100000
+
+static int flexcop_i2c_operation(struct flexcop_device *fc,
+ flexcop_ibi_value *r100)
+{
+ int i;
+ flexcop_ibi_value r;
+
+ r100->tw_sm_c_100.working_start = 1;
+ deb_i2c("r100 before: %08x\n",r100->raw);
+
+ fc->write_ibi_reg(fc, tw_sm_c_100, ibi_zero);
+ fc->write_ibi_reg(fc, tw_sm_c_100, *r100); /* initiating i2c operation */
+
+ for (i = 0; i < FC_MAX_I2C_RETRIES; i++) {
+ r = fc->read_ibi_reg(fc, tw_sm_c_100);
+
+ if (!r.tw_sm_c_100.no_base_addr_ack_error) {
+ if (r.tw_sm_c_100.st_done) {
+ *r100 = r;
+ deb_i2c("i2c success\n");
+ return 0;
+ }
+ } else {
+ deb_i2c("suffering from an i2c ack_error\n");
+ return -EREMOTEIO;
+ }
+ }
+ deb_i2c("tried %d times i2c operation, "
+ "never finished or too many ack errors.\n", i);
+ return -EREMOTEIO;
+}
+
+static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c,
+ flexcop_ibi_value r100, u8 *buf)
+{
+ flexcop_ibi_value r104;
+ int len = r100.tw_sm_c_100.total_bytes,
+ /* remember total_bytes is buflen-1 */
+ ret;
+
+ /* work-around to have CableStar2 and SkyStar2 rev 2.7 work
+ * correctly:
+ *
+ * the ITD1000 is behind an i2c-gate which closes automatically
+ * after an i2c-transaction the STV0297 needs 2 consecutive reads
+ * one with no_base_addr = 0 and one with 1
+ *
+ * those two work-arounds are conflictin: we check for the card
+ * type, it is set when probing the ITD1000 */
+ if (i2c->fc->dev_type == FC_SKY_REV27)
+ r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr;
+
+ ret = flexcop_i2c_operation(i2c->fc, &r100);
+ if (ret != 0) {
+ deb_i2c("Retrying operation\n");
+ r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr;
+ ret = flexcop_i2c_operation(i2c->fc, &r100);
+ }
+ if (ret != 0) {
+ deb_i2c("read failed. %d\n", ret);
+ return ret;
+ }
+
+ buf[0] = r100.tw_sm_c_100.data1_reg;
+
+ if (len > 0) {
+ r104 = i2c->fc->read_ibi_reg(i2c->fc, tw_sm_c_104);
+ deb_i2c("read: r100: %08x, r104: %08x\n", r100.raw, r104.raw);
+
+ /* there is at least one more byte, otherwise we wouldn't be here */
+ buf[1] = r104.tw_sm_c_104.data2_reg;
+ if (len > 1) buf[2] = r104.tw_sm_c_104.data3_reg;
+ if (len > 2) buf[3] = r104.tw_sm_c_104.data4_reg;
+ }
+ return 0;
+}
+
+static int flexcop_i2c_write4(struct flexcop_device *fc,
+ flexcop_ibi_value r100, u8 *buf)
+{
+ flexcop_ibi_value r104;
+ int len = r100.tw_sm_c_100.total_bytes; /* remember total_bytes is buflen-1 */
+ r104.raw = 0;
+
+ /* there is at least one byte, otherwise we wouldn't be here */
+ r100.tw_sm_c_100.data1_reg = buf[0];
+ r104.tw_sm_c_104.data2_reg = len > 0 ? buf[1] : 0;
+ r104.tw_sm_c_104.data3_reg = len > 1 ? buf[2] : 0;
+ r104.tw_sm_c_104.data4_reg = len > 2 ? buf[3] : 0;
+
+ deb_i2c("write: r100: %08x, r104: %08x\n", r100.raw, r104.raw);
+
+ /* write the additional i2c data before doing the actual i2c operation */
+ fc->write_ibi_reg(fc, tw_sm_c_104, r104);
+ return flexcop_i2c_operation(fc, &r100);
+}
+
+int flexcop_i2c_request(struct flexcop_i2c_adapter *i2c,
+ flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len)
+{
+ int ret;
+
+#ifdef DUMP_I2C_MESSAGES
+ int i;
+#endif
+
+ u16 bytes_to_transfer;
+ flexcop_ibi_value r100;
+
+ deb_i2c("op = %d\n",op);
+ r100.raw = 0;
+ r100.tw_sm_c_100.chipaddr = chipaddr;
+ r100.tw_sm_c_100.twoWS_rw = op;
+ r100.tw_sm_c_100.twoWS_port_reg = i2c->port;
+
+#ifdef DUMP_I2C_MESSAGES
+ printk(KERN_DEBUG "%d ", i2c->port);
+ if (op == FC_READ)
+ printk("rd(");
+ else
+ printk("wr(");
+ printk("%02x): %02x ", chipaddr, addr);
+#endif
+
+ /* in that case addr is the only value ->
+ * we write it twice as baseaddr and val0
+ * BBTI is doing it like that for ISL6421 at least */
+ if (i2c->no_base_addr && len == 0 && op == FC_WRITE) {
+ buf = &addr;
+ len = 1;
+ }
+
+ while (len != 0) {
+ bytes_to_transfer = len > 4 ? 4 : len;
+
+ r100.tw_sm_c_100.total_bytes = bytes_to_transfer - 1;
+ r100.tw_sm_c_100.baseaddr = addr;
+
+ if (op == FC_READ)
+ ret = flexcop_i2c_read4(i2c, r100, buf);
+ else
+ ret = flexcop_i2c_write4(i2c->fc, r100, buf);
+
+#ifdef DUMP_I2C_MESSAGES
+ for (i = 0; i < bytes_to_transfer; i++)
+ printk("%02x ", buf[i]);
+#endif
+
+ if (ret < 0)
+ return ret;
+
+ buf += bytes_to_transfer;
+ addr += bytes_to_transfer;
+ len -= bytes_to_transfer;
+ }
+
+#ifdef DUMP_I2C_MESSAGES
+ printk("\n");
+#endif
+
+ return 0;
+}
+/* exported for PCI i2c */
+EXPORT_SYMBOL(flexcop_i2c_request);
+
+/* master xfer callback for demodulator */
+static int flexcop_master_xfer(struct i2c_adapter *i2c_adap,
+ struct i2c_msg msgs[], int num)
+{
+ struct flexcop_i2c_adapter *i2c = i2c_get_adapdata(i2c_adap);
+ int i, ret = 0;
+
+ /* Some drivers use 1 byte or 0 byte reads as probes, which this
+ * driver doesn't support. These probes will always fail, so this
+ * hack makes them always succeed. If one knew how, it would of
+ * course be better to actually do the read. */
+ if (num == 1 && msgs[0].flags == I2C_M_RD && msgs[0].len <= 1)
+ return 1;
+
+ if (mutex_lock_interruptible(&i2c->fc->i2c_mutex))
+ return -ERESTARTSYS;
+
+ for (i = 0; i < num; i++) {
+ /* reading */
+ if (i+1 < num && (msgs[i+1].flags == I2C_M_RD)) {
+ ret = i2c->fc->i2c_request(i2c, FC_READ, msgs[i].addr,
+ msgs[i].buf[0], msgs[i+1].buf,
+ msgs[i+1].len);
+ i++; /* skip the following message */
+ } else /* writing */
+ ret = i2c->fc->i2c_request(i2c, FC_WRITE, msgs[i].addr,
+ msgs[i].buf[0], &msgs[i].buf[1],
+ msgs[i].len - 1);
+ if (ret < 0) {
+ deb_i2c("i2c master_xfer failed");
+ break;
+ }
+ }
+
+ mutex_unlock(&i2c->fc->i2c_mutex);
+
+ if (ret == 0)
+ ret = num;
+ return ret;
+}
+
+static u32 flexcop_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm flexcop_algo = {
+ .master_xfer = flexcop_master_xfer,
+ .functionality = flexcop_i2c_func,
+};
+
+int flexcop_i2c_init(struct flexcop_device *fc)
+{
+ int ret;
+ mutex_init(&fc->i2c_mutex);
+
+ fc->fc_i2c_adap[0].fc = fc;
+ fc->fc_i2c_adap[1].fc = fc;
+ fc->fc_i2c_adap[2].fc = fc;
+ fc->fc_i2c_adap[0].port = FC_I2C_PORT_DEMOD;
+ fc->fc_i2c_adap[1].port = FC_I2C_PORT_EEPROM;
+ fc->fc_i2c_adap[2].port = FC_I2C_PORT_TUNER;
+
+ strlcpy(fc->fc_i2c_adap[0].i2c_adap.name, "B2C2 FlexCop I2C to demod",
+ sizeof(fc->fc_i2c_adap[0].i2c_adap.name));
+ strlcpy(fc->fc_i2c_adap[1].i2c_adap.name, "B2C2 FlexCop I2C to eeprom",
+ sizeof(fc->fc_i2c_adap[1].i2c_adap.name));
+ strlcpy(fc->fc_i2c_adap[2].i2c_adap.name, "B2C2 FlexCop I2C to tuner",
+ sizeof(fc->fc_i2c_adap[2].i2c_adap.name));
+
+ i2c_set_adapdata(&fc->fc_i2c_adap[0].i2c_adap, &fc->fc_i2c_adap[0]);
+ i2c_set_adapdata(&fc->fc_i2c_adap[1].i2c_adap, &fc->fc_i2c_adap[1]);
+ i2c_set_adapdata(&fc->fc_i2c_adap[2].i2c_adap, &fc->fc_i2c_adap[2]);
+
+ fc->fc_i2c_adap[0].i2c_adap.algo =
+ fc->fc_i2c_adap[1].i2c_adap.algo =
+ fc->fc_i2c_adap[2].i2c_adap.algo = &flexcop_algo;
+ fc->fc_i2c_adap[0].i2c_adap.algo_data =
+ fc->fc_i2c_adap[1].i2c_adap.algo_data =
+ fc->fc_i2c_adap[2].i2c_adap.algo_data = NULL;
+ fc->fc_i2c_adap[0].i2c_adap.dev.parent =
+ fc->fc_i2c_adap[1].i2c_adap.dev.parent =
+ fc->fc_i2c_adap[2].i2c_adap.dev.parent = fc->dev;
+
+ ret = i2c_add_adapter(&fc->fc_i2c_adap[0].i2c_adap);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_add_adapter(&fc->fc_i2c_adap[1].i2c_adap);
+ if (ret < 0)
+ goto adap_1_failed;
+
+ ret = i2c_add_adapter(&fc->fc_i2c_adap[2].i2c_adap);
+ if (ret < 0)
+ goto adap_2_failed;
+
+ fc->init_state |= FC_STATE_I2C_INIT;
+ return 0;
+
+adap_2_failed:
+ i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap);
+adap_1_failed:
+ i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap);
+ return ret;
+}
+
+void flexcop_i2c_exit(struct flexcop_device *fc)
+{
+ if (fc->init_state & FC_STATE_I2C_INIT) {
+ i2c_del_adapter(&fc->fc_i2c_adap[2].i2c_adap);
+ i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap);
+ i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap);
+ }
+ fc->init_state &= ~FC_STATE_I2C_INIT;
+}
diff --git a/drivers/media/pci/b2c2/flexcop-misc.c b/drivers/media/pci/b2c2/flexcop-misc.c
new file mode 100644
index 000000000000..f06f3a9070f5
--- /dev/null
+++ b/drivers/media/pci/b2c2/flexcop-misc.c
@@ -0,0 +1,86 @@
+/*
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-misc.c - miscellaneous functions
+ * see flexcop.c for copyright information
+ */
+#include "flexcop.h"
+
+void flexcop_determine_revision(struct flexcop_device *fc)
+{
+ flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204);
+
+ switch (v.misc_204.Rev_N_sig_revision_hi) {
+ case 0x2:
+ deb_info("found a FlexCopII.\n");
+ fc->rev = FLEXCOP_II;
+ break;
+ case 0x3:
+ deb_info("found a FlexCopIIb.\n");
+ fc->rev = FLEXCOP_IIB;
+ break;
+ case 0x0:
+ deb_info("found a FlexCopIII.\n");
+ fc->rev = FLEXCOP_III;
+ break;
+ default:
+ err("unknown FlexCop Revision: %x. Please report this to "
+ "linux-dvb@linuxtv.org.",
+ v.misc_204.Rev_N_sig_revision_hi);
+ break;
+ }
+
+ if ((fc->has_32_hw_pid_filter = v.misc_204.Rev_N_sig_caps))
+ deb_info("this FlexCop has "
+ "the additional 32 hardware pid filter.\n");
+ else
+ deb_info("this FlexCop has "
+ "the 6 basic main hardware pid filter.\n");
+ /* bus parts have to decide if hw pid filtering is used or not. */
+}
+
+static const char *flexcop_revision_names[] = {
+ "Unknown chip",
+ "FlexCopII",
+ "FlexCopIIb",
+ "FlexCopIII",
+};
+
+static const char *flexcop_device_names[] = {
+ [FC_UNK] = "Unknown device",
+ [FC_CABLE] = "Cable2PC/CableStar 2 DVB-C",
+ [FC_AIR_DVBT] = "Air2PC/AirStar 2 DVB-T",
+ [FC_AIR_ATSC1] = "Air2PC/AirStar 2 ATSC 1st generation",
+ [FC_AIR_ATSC2] = "Air2PC/AirStar 2 ATSC 2nd generation",
+ [FC_AIR_ATSC3] = "Air2PC/AirStar 2 ATSC 3rd generation (HD5000)",
+ [FC_SKY_REV23] = "Sky2PC/SkyStar 2 DVB-S rev 2.3 (old version)",
+ [FC_SKY_REV26] = "Sky2PC/SkyStar 2 DVB-S rev 2.6",
+ [FC_SKY_REV27] = "Sky2PC/SkyStar 2 DVB-S rev 2.7a/u",
+ [FC_SKY_REV28] = "Sky2PC/SkyStar 2 DVB-S rev 2.8",
+};
+
+static const char *flexcop_bus_names[] = {
+ "USB",
+ "PCI",
+};
+
+void flexcop_device_name(struct flexcop_device *fc,
+ const char *prefix, const char *suffix)
+{
+ info("%s '%s' at the '%s' bus controlled by a '%s' %s",
+ prefix, flexcop_device_names[fc->dev_type],
+ flexcop_bus_names[fc->bus_type],
+ flexcop_revision_names[fc->rev], suffix);
+}
+
+void flexcop_dump_reg(struct flexcop_device *fc,
+ flexcop_ibi_register reg, int num)
+{
+ flexcop_ibi_value v;
+ int i;
+ for (i = 0; i < num; i++) {
+ v = fc->read_ibi_reg(fc, reg+4*i);
+ deb_rdump("0x%03x: %08x, ", reg+4*i, v.raw);
+ }
+ deb_rdump("\n");
+}
+EXPORT_SYMBOL(flexcop_dump_reg);
diff --git a/drivers/media/pci/b2c2/flexcop-pci.c b/drivers/media/pci/b2c2/flexcop-pci.c
new file mode 100644
index 000000000000..44f8fb5f17ff
--- /dev/null
+++ b/drivers/media/pci/b2c2/flexcop-pci.c
@@ -0,0 +1,450 @@
+/*
+ * Linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-pci.c - covers the PCI part including DMA transfers
+ * see flexcop.c for copyright information
+ */
+
+#define FC_LOG_PREFIX "flexcop-pci"
+#include "flexcop-common.h"
+
+static int enable_pid_filtering = 1;
+module_param(enable_pid_filtering, int, 0444);
+MODULE_PARM_DESC(enable_pid_filtering,
+ "enable hardware pid filtering: supported values: 0 (fullts), 1");
+
+static int irq_chk_intv = 100;
+module_param(irq_chk_intv, int, 0644);
+MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ streaming watchdog.");
+
+#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
+#define dprintk(level,args...) \
+ do { if ((debug & level)) printk(args); } while (0)
+#define DEBSTATUS ""
+#else
+#define dprintk(level,args...)
+#define DEBSTATUS " (debugging is not enabled)"
+#endif
+
+#define deb_info(args...) dprintk(0x01, args)
+#define deb_reg(args...) dprintk(0x02, args)
+#define deb_ts(args...) dprintk(0x04, args)
+#define deb_irq(args...) dprintk(0x08, args)
+#define deb_chk(args...) dprintk(0x10, args)
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug,
+ "set debug level (1=info,2=regs,4=TS,8=irqdma,16=check (|-able))."
+ DEBSTATUS);
+
+#define DRIVER_VERSION "0.1"
+#define DRIVER_NAME "flexcop-pci"
+#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de>"
+
+struct flexcop_pci {
+ struct pci_dev *pdev;
+
+#define FC_PCI_INIT 0x01
+#define FC_PCI_DMA_INIT 0x02
+ int init_state;
+
+ void __iomem *io_mem;
+ u32 irq;
+ /* buffersize (at least for DMA1, need to be % 188 == 0,
+ * this logic is required */
+#define FC_DEFAULT_DMA1_BUFSIZE (1280 * 188)
+#define FC_DEFAULT_DMA2_BUFSIZE (10 * 188)
+ struct flexcop_dma dma[2];
+
+ int active_dma1_addr; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */
+ u32 last_dma1_cur_pos;
+ /* position of the pointer last time the timer/packet irq occurred */
+ int count;
+ int count_prev;
+ int stream_problem;
+
+ spinlock_t irq_lock;
+ unsigned long last_irq;
+
+ struct delayed_work irq_check_work;
+ struct flexcop_device *fc_dev;
+};
+
+static int lastwreg, lastwval, lastrreg, lastrval;
+
+static flexcop_ibi_value flexcop_pci_read_ibi_reg(struct flexcop_device *fc,
+ flexcop_ibi_register r)
+{
+ struct flexcop_pci *fc_pci = fc->bus_specific;
+ flexcop_ibi_value v;
+ v.raw = readl(fc_pci->io_mem + r);
+
+ if (lastrreg != r || lastrval != v.raw) {
+ lastrreg = r; lastrval = v.raw;
+ deb_reg("new rd: %3x: %08x\n", r, v.raw);
+ }
+
+ return v;
+}
+
+static int flexcop_pci_write_ibi_reg(struct flexcop_device *fc,
+ flexcop_ibi_register r, flexcop_ibi_value v)
+{
+ struct flexcop_pci *fc_pci = fc->bus_specific;
+
+ if (lastwreg != r || lastwval != v.raw) {
+ lastwreg = r; lastwval = v.raw;
+ deb_reg("new wr: %3x: %08x\n", r, v.raw);
+ }
+
+ writel(v.raw, fc_pci->io_mem + r);
+ return 0;
+}
+
+static void flexcop_pci_irq_check_work(struct work_struct *work)
+{
+ struct flexcop_pci *fc_pci =
+ container_of(work, struct flexcop_pci, irq_check_work.work);
+ struct flexcop_device *fc = fc_pci->fc_dev;
+
+ if (fc->feedcount) {
+
+ if (fc_pci->count == fc_pci->count_prev) {
+ deb_chk("no IRQ since the last check\n");
+ if (fc_pci->stream_problem++ == 3) {
+ struct dvb_demux_feed *feed;
+ deb_info("flexcop-pci: stream problem, resetting pid filter\n");
+
+ spin_lock_irq(&fc->demux.lock);
+ list_for_each_entry(feed, &fc->demux.feed_list,
+ list_head) {
+ flexcop_pid_feed_control(fc, feed, 0);
+ }
+
+ list_for_each_entry(feed, &fc->demux.feed_list,
+ list_head) {
+ flexcop_pid_feed_control(fc, feed, 1);
+ }
+ spin_unlock_irq(&fc->demux.lock);
+
+ fc_pci->stream_problem = 0;
+ }
+ } else {
+ fc_pci->stream_problem = 0;
+ fc_pci->count_prev = fc_pci->count;
+ }
+ }
+
+ schedule_delayed_work(&fc_pci->irq_check_work,
+ msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
+}
+
+/* When PID filtering is turned on, we use the timer IRQ, because small amounts
+ * of data need to be passed to the user space instantly as well. When PID
+ * filtering is turned off, we use the page-change-IRQ */
+static irqreturn_t flexcop_pci_isr(int irq, void *dev_id)
+{
+ struct flexcop_pci *fc_pci = dev_id;
+ struct flexcop_device *fc = fc_pci->fc_dev;
+ unsigned long flags;
+ flexcop_ibi_value v;
+ irqreturn_t ret = IRQ_HANDLED;
+
+ spin_lock_irqsave(&fc_pci->irq_lock, flags);
+ v = fc->read_ibi_reg(fc, irq_20c);
+
+ /* errors */
+ if (v.irq_20c.Data_receiver_error)
+ deb_chk("data receiver error\n");
+ if (v.irq_20c.Continuity_error_flag)
+ deb_chk("Contunuity error flag is set\n");
+ if (v.irq_20c.LLC_SNAP_FLAG_set)
+ deb_chk("LLC_SNAP_FLAG_set is set\n");
+ if (v.irq_20c.Transport_Error)
+ deb_chk("Transport error\n");
+
+ if ((fc_pci->count % 1000) == 0)
+ deb_chk("%d valid irq took place so far\n", fc_pci->count);
+
+ if (v.irq_20c.DMA1_IRQ_Status == 1) {
+ if (fc_pci->active_dma1_addr == 0)
+ flexcop_pass_dmx_packets(fc_pci->fc_dev,
+ fc_pci->dma[0].cpu_addr0,
+ fc_pci->dma[0].size / 188);
+ else
+ flexcop_pass_dmx_packets(fc_pci->fc_dev,
+ fc_pci->dma[0].cpu_addr1,
+ fc_pci->dma[0].size / 188);
+
+ deb_irq("page change to page: %d\n",!fc_pci->active_dma1_addr);
+ fc_pci->active_dma1_addr = !fc_pci->active_dma1_addr;
+ /* for the timer IRQ we only can use buffer dmx feeding, because we don't have
+ * complete TS packets when reading from the DMA memory */
+ } else if (v.irq_20c.DMA1_Timer_Status == 1) {
+ dma_addr_t cur_addr =
+ fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2;
+ u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0;
+
+ deb_irq("%u irq: %08x cur_addr: %llx: cur_pos: %08x, "
+ "last_cur_pos: %08x ",
+ jiffies_to_usecs(jiffies - fc_pci->last_irq),
+ v.raw, (unsigned long long)cur_addr, cur_pos,
+ fc_pci->last_dma1_cur_pos);
+ fc_pci->last_irq = jiffies;
+
+ /* buffer end was reached, restarted from the beginning
+ * pass the data from last_cur_pos to the buffer end to the demux
+ */
+ if (cur_pos < fc_pci->last_dma1_cur_pos) {
+ deb_irq(" end was reached: passing %d bytes ",
+ (fc_pci->dma[0].size*2 - 1) -
+ fc_pci->last_dma1_cur_pos);
+ flexcop_pass_dmx_data(fc_pci->fc_dev,
+ fc_pci->dma[0].cpu_addr0 +
+ fc_pci->last_dma1_cur_pos,
+ (fc_pci->dma[0].size*2) -
+ fc_pci->last_dma1_cur_pos);
+ fc_pci->last_dma1_cur_pos = 0;
+ }
+
+ if (cur_pos > fc_pci->last_dma1_cur_pos) {
+ deb_irq(" passing %d bytes ",
+ cur_pos - fc_pci->last_dma1_cur_pos);
+ flexcop_pass_dmx_data(fc_pci->fc_dev,
+ fc_pci->dma[0].cpu_addr0 +
+ fc_pci->last_dma1_cur_pos,
+ cur_pos - fc_pci->last_dma1_cur_pos);
+ }
+ deb_irq("\n");
+
+ fc_pci->last_dma1_cur_pos = cur_pos;
+ fc_pci->count++;
+ } else {
+ deb_irq("isr for flexcop called, "
+ "apparently without reason (%08x)\n", v.raw);
+ ret = IRQ_NONE;
+ }
+
+ spin_unlock_irqrestore(&fc_pci->irq_lock, flags);
+ return ret;
+}
+
+static int flexcop_pci_stream_control(struct flexcop_device *fc, int onoff)
+{
+ struct flexcop_pci *fc_pci = fc->bus_specific;
+ if (onoff) {
+ flexcop_dma_config(fc, &fc_pci->dma[0], FC_DMA_1);
+ flexcop_dma_config(fc, &fc_pci->dma[1], FC_DMA_2);
+ flexcop_dma_config_timer(fc, FC_DMA_1, 0);
+ flexcop_dma_xfer_control(fc, FC_DMA_1,
+ FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1, 1);
+ deb_irq("DMA xfer enabled\n");
+
+ fc_pci->last_dma1_cur_pos = 0;
+ flexcop_dma_control_timer_irq(fc, FC_DMA_1, 1);
+ deb_irq("IRQ enabled\n");
+ fc_pci->count_prev = fc_pci->count;
+ } else {
+ flexcop_dma_control_timer_irq(fc, FC_DMA_1, 0);
+ deb_irq("IRQ disabled\n");
+
+ flexcop_dma_xfer_control(fc, FC_DMA_1,
+ FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1, 0);
+ deb_irq("DMA xfer disabled\n");
+ }
+ return 0;
+}
+
+static int flexcop_pci_dma_init(struct flexcop_pci *fc_pci)
+{
+ int ret;
+ ret = flexcop_dma_allocate(fc_pci->pdev, &fc_pci->dma[0],
+ FC_DEFAULT_DMA1_BUFSIZE);
+ if (ret != 0)
+ return ret;
+
+ ret = flexcop_dma_allocate(fc_pci->pdev, &fc_pci->dma[1],
+ FC_DEFAULT_DMA2_BUFSIZE);
+ if (ret != 0) {
+ flexcop_dma_free(&fc_pci->dma[0]);
+ return ret;
+ }
+
+ flexcop_sram_set_dest(fc_pci->fc_dev, FC_SRAM_DEST_MEDIA |
+ FC_SRAM_DEST_NET, FC_SRAM_DEST_TARGET_DMA1);
+ flexcop_sram_set_dest(fc_pci->fc_dev, FC_SRAM_DEST_CAO |
+ FC_SRAM_DEST_CAI, FC_SRAM_DEST_TARGET_DMA2);
+ fc_pci->init_state |= FC_PCI_DMA_INIT;
+ return ret;
+}
+
+static void flexcop_pci_dma_exit(struct flexcop_pci *fc_pci)
+{
+ if (fc_pci->init_state & FC_PCI_DMA_INIT) {
+ flexcop_dma_free(&fc_pci->dma[0]);
+ flexcop_dma_free(&fc_pci->dma[1]);
+ }
+ fc_pci->init_state &= ~FC_PCI_DMA_INIT;
+}
+
+static int flexcop_pci_init(struct flexcop_pci *fc_pci)
+{
+ int ret;
+
+ info("card revision %x", fc_pci->pdev->revision);
+
+ if ((ret = pci_enable_device(fc_pci->pdev)) != 0)
+ return ret;
+ pci_set_master(fc_pci->pdev);
+
+ if ((ret = pci_request_regions(fc_pci->pdev, DRIVER_NAME)) != 0)
+ goto err_pci_disable_device;
+
+ fc_pci->io_mem = pci_iomap(fc_pci->pdev, 0, 0x800);
+
+ if (!fc_pci->io_mem) {
+ err("cannot map io memory\n");
+ ret = -EIO;
+ goto err_pci_release_regions;
+ }
+
+ pci_set_drvdata(fc_pci->pdev, fc_pci);
+ spin_lock_init(&fc_pci->irq_lock);
+ if ((ret = request_irq(fc_pci->pdev->irq, flexcop_pci_isr,
+ IRQF_SHARED, DRIVER_NAME, fc_pci)) != 0)
+ goto err_pci_iounmap;
+
+ fc_pci->init_state |= FC_PCI_INIT;
+ return ret;
+
+err_pci_iounmap:
+ pci_iounmap(fc_pci->pdev, fc_pci->io_mem);
+ pci_set_drvdata(fc_pci->pdev, NULL);
+err_pci_release_regions:
+ pci_release_regions(fc_pci->pdev);
+err_pci_disable_device:
+ pci_disable_device(fc_pci->pdev);
+ return ret;
+}
+
+static void flexcop_pci_exit(struct flexcop_pci *fc_pci)
+{
+ if (fc_pci->init_state & FC_PCI_INIT) {
+ free_irq(fc_pci->pdev->irq, fc_pci);
+ pci_iounmap(fc_pci->pdev, fc_pci->io_mem);
+ pci_set_drvdata(fc_pci->pdev, NULL);
+ pci_release_regions(fc_pci->pdev);
+ pci_disable_device(fc_pci->pdev);
+ }
+ fc_pci->init_state &= ~FC_PCI_INIT;
+}
+
+static int flexcop_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct flexcop_device *fc;
+ struct flexcop_pci *fc_pci;
+ int ret = -ENOMEM;
+
+ if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_pci))) == NULL) {
+ err("out of memory\n");
+ return -ENOMEM;
+ }
+
+ /* general flexcop init */
+ fc_pci = fc->bus_specific;
+ fc_pci->fc_dev = fc;
+
+ fc->read_ibi_reg = flexcop_pci_read_ibi_reg;
+ fc->write_ibi_reg = flexcop_pci_write_ibi_reg;
+ fc->i2c_request = flexcop_i2c_request;
+ fc->get_mac_addr = flexcop_eeprom_check_mac_addr;
+ fc->stream_control = flexcop_pci_stream_control;
+
+ if (enable_pid_filtering)
+ info("will use the HW PID filter.");
+ else
+ info("will pass the complete TS to the demuxer.");
+
+ fc->pid_filtering = enable_pid_filtering;
+ fc->bus_type = FC_PCI;
+ fc->dev = &pdev->dev;
+ fc->owner = THIS_MODULE;
+
+ /* bus specific part */
+ fc_pci->pdev = pdev;
+ if ((ret = flexcop_pci_init(fc_pci)) != 0)
+ goto err_kfree;
+
+ /* init flexcop */
+ if ((ret = flexcop_device_initialize(fc)) != 0)
+ goto err_pci_exit;
+
+ /* init dma */
+ if ((ret = flexcop_pci_dma_init(fc_pci)) != 0)
+ goto err_fc_exit;
+
+ INIT_DELAYED_WORK(&fc_pci->irq_check_work, flexcop_pci_irq_check_work);
+
+ if (irq_chk_intv > 0)
+ schedule_delayed_work(&fc_pci->irq_check_work,
+ msecs_to_jiffies(irq_chk_intv < 100 ?
+ 100 :
+ irq_chk_intv));
+ return ret;
+
+err_fc_exit:
+ flexcop_device_exit(fc);
+err_pci_exit:
+ flexcop_pci_exit(fc_pci);
+err_kfree:
+ flexcop_device_kfree(fc);
+ return ret;
+}
+
+/* in theory every _exit function should be called exactly two times,
+ * here and in the bail-out-part of the _init-function
+ */
+static void flexcop_pci_remove(struct pci_dev *pdev)
+{
+ struct flexcop_pci *fc_pci = pci_get_drvdata(pdev);
+
+ if (irq_chk_intv > 0)
+ cancel_delayed_work(&fc_pci->irq_check_work);
+
+ flexcop_pci_dma_exit(fc_pci);
+ flexcop_device_exit(fc_pci->fc_dev);
+ flexcop_pci_exit(fc_pci);
+ flexcop_device_kfree(fc_pci->fc_dev);
+}
+
+static struct pci_device_id flexcop_pci_tbl[] = {
+ { PCI_DEVICE(0x13d0, 0x2103) },
+ { },
+};
+
+MODULE_DEVICE_TABLE(pci, flexcop_pci_tbl);
+
+static struct pci_driver flexcop_pci_driver = {
+ .name = "b2c2_flexcop_pci",
+ .id_table = flexcop_pci_tbl,
+ .probe = flexcop_pci_probe,
+ .remove = flexcop_pci_remove,
+};
+
+static int __init flexcop_pci_module_init(void)
+{
+ return pci_register_driver(&flexcop_pci_driver);
+}
+
+static void __exit flexcop_pci_module_exit(void)
+{
+ pci_unregister_driver(&flexcop_pci_driver);
+}
+
+module_init(flexcop_pci_module_init);
+module_exit(flexcop_pci_module_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_NAME);
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/pci/b2c2/flexcop-reg.h b/drivers/media/pci/b2c2/flexcop-reg.h
new file mode 100644
index 000000000000..dc4528dcbb98
--- /dev/null
+++ b/drivers/media/pci/b2c2/flexcop-reg.h
@@ -0,0 +1,166 @@
+/*
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-reg.h - register abstraction for FlexCopII, FlexCopIIb and FlexCopIII
+ * see flexcop.c for copyright information
+ */
+#ifndef __FLEXCOP_REG_H__
+#define __FLEXCOP_REG_H__
+
+typedef enum {
+ FLEXCOP_UNK = 0,
+ FLEXCOP_II,
+ FLEXCOP_IIB,
+ FLEXCOP_III,
+} flexcop_revision_t;
+
+typedef enum {
+ FC_UNK = 0,
+ FC_CABLE,
+ FC_AIR_DVBT,
+ FC_AIR_ATSC1,
+ FC_AIR_ATSC2,
+ FC_AIR_ATSC3,
+ FC_SKY_REV23,
+ FC_SKY_REV26,
+ FC_SKY_REV27,
+ FC_SKY_REV28,
+} flexcop_device_type_t;
+
+typedef enum {
+ FC_USB = 0,
+ FC_PCI,
+} flexcop_bus_t;
+
+/* FlexCop IBI Registers */
+#if defined(__LITTLE_ENDIAN)
+#include "flexcop_ibi_value_le.h"
+#else
+#if defined(__BIG_ENDIAN)
+#include "flexcop_ibi_value_be.h"
+#else
+#error no endian defined
+#endif
+#endif
+
+#define fc_data_Tag_ID_DVB 0x3e
+#define fc_data_Tag_ID_ATSC 0x3f
+#define fc_data_Tag_ID_IDSB 0x8b
+
+#define fc_key_code_default 0x1
+#define fc_key_code_even 0x2
+#define fc_key_code_odd 0x3
+
+extern flexcop_ibi_value ibi_zero;
+
+typedef enum {
+ FC_I2C_PORT_DEMOD = 1,
+ FC_I2C_PORT_EEPROM = 2,
+ FC_I2C_PORT_TUNER = 3,
+} flexcop_i2c_port_t;
+
+typedef enum {
+ FC_WRITE = 0,
+ FC_READ = 1,
+} flexcop_access_op_t;
+
+typedef enum {
+ FC_SRAM_DEST_NET = 1,
+ FC_SRAM_DEST_CAI = 2,
+ FC_SRAM_DEST_CAO = 4,
+ FC_SRAM_DEST_MEDIA = 8
+} flexcop_sram_dest_t;
+
+typedef enum {
+ FC_SRAM_DEST_TARGET_WAN_USB = 0,
+ FC_SRAM_DEST_TARGET_DMA1 = 1,
+ FC_SRAM_DEST_TARGET_DMA2 = 2,
+ FC_SRAM_DEST_TARGET_FC3_CA = 3
+} flexcop_sram_dest_target_t;
+
+typedef enum {
+ FC_SRAM_2_32KB = 0, /* 64KB */
+ FC_SRAM_1_32KB = 1, /* 32KB - default fow FCII */
+ FC_SRAM_1_128KB = 2, /* 128KB */
+ FC_SRAM_1_48KB = 3, /* 48KB - default for FCIII */
+} flexcop_sram_type_t;
+
+typedef enum {
+ FC_WAN_SPEED_4MBITS = 0,
+ FC_WAN_SPEED_8MBITS = 1,
+ FC_WAN_SPEED_12MBITS = 2,
+ FC_WAN_SPEED_16MBITS = 3,
+} flexcop_wan_speed_t;
+
+typedef enum {
+ FC_DMA_1 = 1,
+ FC_DMA_2 = 2,
+} flexcop_dma_index_t;
+
+typedef enum {
+ FC_DMA_SUBADDR_0 = 1,
+ FC_DMA_SUBADDR_1 = 2,
+} flexcop_dma_addr_index_t;
+
+/* names of the particular registers */
+typedef enum {
+ dma1_000 = 0x000,
+ dma1_004 = 0x004,
+ dma1_008 = 0x008,
+ dma1_00c = 0x00c,
+ dma2_010 = 0x010,
+ dma2_014 = 0x014,
+ dma2_018 = 0x018,
+ dma2_01c = 0x01c,
+
+ tw_sm_c_100 = 0x100,
+ tw_sm_c_104 = 0x104,
+ tw_sm_c_108 = 0x108,
+ tw_sm_c_10c = 0x10c,
+ tw_sm_c_110 = 0x110,
+
+ lnb_switch_freq_200 = 0x200,
+ misc_204 = 0x204,
+ ctrl_208 = 0x208,
+ irq_20c = 0x20c,
+ sw_reset_210 = 0x210,
+ misc_214 = 0x214,
+ mbox_v8_to_host_218 = 0x218,
+ mbox_host_to_v8_21c = 0x21c,
+
+ pid_filter_300 = 0x300,
+ pid_filter_304 = 0x304,
+ pid_filter_308 = 0x308,
+ pid_filter_30c = 0x30c,
+ index_reg_310 = 0x310,
+ pid_n_reg_314 = 0x314,
+ mac_low_reg_318 = 0x318,
+ mac_high_reg_31c = 0x31c,
+
+ data_tag_400 = 0x400,
+ card_id_408 = 0x408,
+ card_id_40c = 0x40c,
+ mac_address_418 = 0x418,
+ mac_address_41c = 0x41c,
+
+ ci_600 = 0x600,
+ pi_604 = 0x604,
+ pi_608 = 0x608,
+ dvb_reg_60c = 0x60c,
+
+ sram_ctrl_reg_700 = 0x700,
+ net_buf_reg_704 = 0x704,
+ cai_buf_reg_708 = 0x708,
+ cao_buf_reg_70c = 0x70c,
+ media_buf_reg_710 = 0x710,
+ sram_dest_reg_714 = 0x714,
+ net_buf_reg_718 = 0x718,
+ wan_ctrl_reg_71c = 0x71c,
+} flexcop_ibi_register;
+
+#define flexcop_set_ibi_value(reg,attr,val) { \
+ flexcop_ibi_value v = fc->read_ibi_reg(fc,reg); \
+ v.reg.attr = val; \
+ fc->write_ibi_reg(fc,reg,v); \
+}
+
+#endif
diff --git a/drivers/media/pci/b2c2/flexcop-sram.c b/drivers/media/pci/b2c2/flexcop-sram.c
new file mode 100644
index 000000000000..f2199e43e803
--- /dev/null
+++ b/drivers/media/pci/b2c2/flexcop-sram.c
@@ -0,0 +1,363 @@
+/*
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-sram.c - functions for controlling the SRAM
+ * see flexcop.c for copyright information
+ */
+#include "flexcop.h"
+
+static void flexcop_sram_set_chip(struct flexcop_device *fc,
+ flexcop_sram_type_t type)
+{
+ flexcop_set_ibi_value(wan_ctrl_reg_71c, sram_chip, type);
+}
+
+int flexcop_sram_init(struct flexcop_device *fc)
+{
+ switch (fc->rev) {
+ case FLEXCOP_II:
+ case FLEXCOP_IIB:
+ flexcop_sram_set_chip(fc, FC_SRAM_1_32KB);
+ break;
+ case FLEXCOP_III:
+ flexcop_sram_set_chip(fc, FC_SRAM_1_48KB);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest,
+ flexcop_sram_dest_target_t target)
+{
+ flexcop_ibi_value v;
+ v = fc->read_ibi_reg(fc, sram_dest_reg_714);
+
+ if (fc->rev != FLEXCOP_III && target == FC_SRAM_DEST_TARGET_FC3_CA) {
+ err("SRAM destination target to available on FlexCopII(b)\n");
+ return -EINVAL;
+ }
+ deb_sram("sram dest: %x target: %x\n", dest, target);
+
+ if (dest & FC_SRAM_DEST_NET)
+ v.sram_dest_reg_714.NET_Dest = target;
+ if (dest & FC_SRAM_DEST_CAI)
+ v.sram_dest_reg_714.CAI_Dest = target;
+ if (dest & FC_SRAM_DEST_CAO)
+ v.sram_dest_reg_714.CAO_Dest = target;
+ if (dest & FC_SRAM_DEST_MEDIA)
+ v.sram_dest_reg_714.MEDIA_Dest = target;
+
+ fc->write_ibi_reg(fc,sram_dest_reg_714,v);
+ udelay(1000); /* TODO delay really necessary */
+
+ return 0;
+}
+EXPORT_SYMBOL(flexcop_sram_set_dest);
+
+void flexcop_wan_set_speed(struct flexcop_device *fc, flexcop_wan_speed_t s)
+{
+ flexcop_set_ibi_value(wan_ctrl_reg_71c,wan_speed_sig,s);
+}
+EXPORT_SYMBOL(flexcop_wan_set_speed);
+
+void flexcop_sram_ctrl(struct flexcop_device *fc, int usb_wan, int sramdma, int maximumfill)
+{
+ flexcop_ibi_value v = fc->read_ibi_reg(fc,sram_dest_reg_714);
+ v.sram_dest_reg_714.ctrl_usb_wan = usb_wan;
+ v.sram_dest_reg_714.ctrl_sramdma = sramdma;
+ v.sram_dest_reg_714.ctrl_maximumfill = maximumfill;
+ fc->write_ibi_reg(fc,sram_dest_reg_714,v);
+}
+EXPORT_SYMBOL(flexcop_sram_ctrl);
+
+#if 0
+static void flexcop_sram_write(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, u32 len)
+{
+ int i, retries;
+ u32 command;
+
+ for (i = 0; i < len; i++) {
+ command = bank | addr | 0x04000000 | (*buf << 0x10);
+
+ retries = 2;
+
+ while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) {
+ mdelay(1);
+ retries--;
+ };
+
+ if (retries == 0)
+ printk("%s: SRAM timeout\n", __func__);
+
+ write_reg_dw(adapter, 0x700, command);
+
+ buf++;
+ addr++;
+ }
+}
+
+static void flex_sram_read(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, u32 len)
+{
+ int i, retries;
+ u32 command, value;
+
+ for (i = 0; i < len; i++) {
+ command = bank | addr | 0x04008000;
+
+ retries = 10000;
+
+ while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) {
+ mdelay(1);
+ retries--;
+ };
+
+ if (retries == 0)
+ printk("%s: SRAM timeout\n", __func__);
+
+ write_reg_dw(adapter, 0x700, command);
+
+ retries = 10000;
+
+ while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) {
+ mdelay(1);
+ retries--;
+ };
+
+ if (retries == 0)
+ printk("%s: SRAM timeout\n", __func__);
+
+ value = read_reg_dw(adapter, 0x700) >> 0x10;
+
+ *buf = (value & 0xff);
+
+ addr++;
+ buf++;
+ }
+}
+
+static void sram_write_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len)
+{
+ u32 bank;
+
+ bank = 0;
+
+ if (adapter->dw_sram_type == 0x20000) {
+ bank = (addr & 0x18000) << 0x0d;
+ }
+
+ if (adapter->dw_sram_type == 0x00000) {
+ if ((addr >> 0x0f) == 0)
+ bank = 0x20000000;
+ else
+ bank = 0x10000000;
+ }
+ flex_sram_write(adapter, bank, addr & 0x7fff, buf, len);
+}
+
+static void sram_read_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len)
+{
+ u32 bank;
+ bank = 0;
+
+ if (adapter->dw_sram_type == 0x20000) {
+ bank = (addr & 0x18000) << 0x0d;
+ }
+
+ if (adapter->dw_sram_type == 0x00000) {
+ if ((addr >> 0x0f) == 0)
+ bank = 0x20000000;
+ else
+ bank = 0x10000000;
+ }
+ flex_sram_read(adapter, bank, addr & 0x7fff, buf, len);
+}
+
+static void sram_read(struct adapter *adapter, u32 addr, u8 *buf, u32 len)
+{
+ u32 length;
+ while (len != 0) {
+ length = len;
+ /* check if the address range belongs to the same
+ * 32K memory chip. If not, the data is read
+ * from one chip at a time */
+ if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) {
+ length = (((addr >> 0x0f) + 1) << 0x0f) - addr;
+ }
+
+ sram_read_chunk(adapter, addr, buf, length);
+ addr = addr + length;
+ buf = buf + length;
+ len = len - length;
+ }
+}
+
+static void sram_write(struct adapter *adapter, u32 addr, u8 *buf, u32 len)
+{
+ u32 length;
+ while (len != 0) {
+ length = len;
+
+ /* check if the address range belongs to the same
+ * 32K memory chip. If not, the data is
+ * written to one chip at a time */
+ if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) {
+ length = (((addr >> 0x0f) + 1) << 0x0f) - addr;
+ }
+
+ sram_write_chunk(adapter, addr, buf, length);
+ addr = addr + length;
+ buf = buf + length;
+ len = len - length;
+ }
+}
+
+static void sram_set_size(struct adapter *adapter, u32 mask)
+{
+ write_reg_dw(adapter, 0x71c,
+ (mask | (~0x30000 & read_reg_dw(adapter, 0x71c))));
+}
+
+static void sram_init(struct adapter *adapter)
+{
+ u32 tmp;
+ tmp = read_reg_dw(adapter, 0x71c);
+ write_reg_dw(adapter, 0x71c, 1);
+
+ if (read_reg_dw(adapter, 0x71c) != 0) {
+ write_reg_dw(adapter, 0x71c, tmp);
+ adapter->dw_sram_type = tmp & 0x30000;
+ ddprintk("%s: dw_sram_type = %x\n", __func__, adapter->dw_sram_type);
+ } else {
+ adapter->dw_sram_type = 0x10000;
+ ddprintk("%s: dw_sram_type = %x\n", __func__, adapter->dw_sram_type);
+ }
+}
+
+static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr)
+{
+ u8 tmp1, tmp2;
+ dprintk("%s: mask = %x, addr = %x\n", __func__, mask, addr);
+
+ sram_set_size(adapter, mask);
+ sram_init(adapter);
+
+ tmp2 = 0xa5;
+ tmp1 = 0x4f;
+
+ sram_write(adapter, addr, &tmp2, 1);
+ sram_write(adapter, addr + 4, &tmp1, 1);
+
+ tmp2 = 0;
+ mdelay(20);
+
+ sram_read(adapter, addr, &tmp2, 1);
+ sram_read(adapter, addr, &tmp2, 1);
+
+ dprintk("%s: wrote 0xa5, read 0x%2x\n", __func__, tmp2);
+
+ if (tmp2 != 0xa5)
+ return 0;
+
+ tmp2 = 0x5a;
+ tmp1 = 0xf4;
+
+ sram_write(adapter, addr, &tmp2, 1);
+ sram_write(adapter, addr + 4, &tmp1, 1);
+
+ tmp2 = 0;
+ mdelay(20);
+
+ sram_read(adapter, addr, &tmp2, 1);
+ sram_read(adapter, addr, &tmp2, 1);
+
+ dprintk("%s: wrote 0x5a, read 0x%2x\n", __func__, tmp2);
+
+ if (tmp2 != 0x5a)
+ return 0;
+ return 1;
+}
+
+static u32 sram_length(struct adapter *adapter)
+{
+ if (adapter->dw_sram_type == 0x10000)
+ return 32768; /* 32K */
+ if (adapter->dw_sram_type == 0x00000)
+ return 65536; /* 64K */
+ if (adapter->dw_sram_type == 0x20000)
+ return 131072; /* 128K */
+ return 32768; /* 32K */
+}
+
+/* FlexcopII can work with 32K, 64K or 128K of external SRAM memory.
+ - for 128K there are 4x32K chips at bank 0,1,2,3.
+ - for 64K there are 2x32K chips at bank 1,2.
+ - for 32K there is one 32K chip at bank 0.
+
+ FlexCop works only with one bank at a time. The bank is selected
+ by bits 28-29 of the 0x700 register.
+
+ bank 0 covers addresses 0x00000-0x07fff
+ bank 1 covers addresses 0x08000-0x0ffff
+ bank 2 covers addresses 0x10000-0x17fff
+ bank 3 covers addresses 0x18000-0x1ffff */
+
+static int flexcop_sram_detect(struct flexcop_device *fc)
+{
+ flexcop_ibi_value r208, r71c_0, vr71c_1;
+ r208 = fc->read_ibi_reg(fc, ctrl_208);
+ fc->write_ibi_reg(fc, ctrl_208, ibi_zero);
+
+ r71c_0 = fc->read_ibi_reg(fc, wan_ctrl_reg_71c);
+ write_reg_dw(adapter, 0x71c, 1);
+ tmp3 = read_reg_dw(adapter, 0x71c);
+ dprintk("%s: tmp3 = %x\n", __func__, tmp3);
+ write_reg_dw(adapter, 0x71c, tmp2);
+
+ // check for internal SRAM ???
+ tmp3--;
+ if (tmp3 != 0) {
+ sram_set_size(adapter, 0x10000);
+ sram_init(adapter);
+ write_reg_dw(adapter, 0x208, tmp);
+ dprintk("%s: sram size = 32K\n", __func__);
+ return 32;
+ }
+
+ if (sram_test_location(adapter, 0x20000, 0x18000) != 0) {
+ sram_set_size(adapter, 0x20000);
+ sram_init(adapter);
+ write_reg_dw(adapter, 0x208, tmp);
+ dprintk("%s: sram size = 128K\n", __func__);
+ return 128;
+ }
+
+ if (sram_test_location(adapter, 0x00000, 0x10000) != 0) {
+ sram_set_size(adapter, 0x00000);
+ sram_init(adapter);
+ write_reg_dw(adapter, 0x208, tmp);
+ dprintk("%s: sram size = 64K\n", __func__);
+ return 64;
+ }
+
+ if (sram_test_location(adapter, 0x10000, 0x00000) != 0) {
+ sram_set_size(adapter, 0x10000);
+ sram_init(adapter);
+ write_reg_dw(adapter, 0x208, tmp);
+ dprintk("%s: sram size = 32K\n", __func__);
+ return 32;
+ }
+
+ sram_set_size(adapter, 0x10000);
+ sram_init(adapter);
+ write_reg_dw(adapter, 0x208, tmp);
+ dprintk("%s: SRAM detection failed. Set to 32K \n", __func__);
+ return 0;
+}
+
+static void sll_detect_sram_size(struct adapter *adapter)
+{
+ sram_detect_for_flex2(adapter);
+}
+
+#endif
diff --git a/drivers/media/pci/b2c2/flexcop-usb.c b/drivers/media/pci/b2c2/flexcop-usb.c
new file mode 100644
index 000000000000..8b6275f85908
--- /dev/null
+++ b/drivers/media/pci/b2c2/flexcop-usb.c
@@ -0,0 +1,587 @@
+/*
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-usb.c - covers the USB part
+ * see flexcop.c for copyright information
+ */
+#define FC_LOG_PREFIX "flexcop_usb"
+#include "flexcop-usb.h"
+#include "flexcop-common.h"
+
+/* Version information */
+#define DRIVER_VERSION "0.1"
+#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV USB Driver"
+#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de>"
+
+/* debug */
+#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
+#define dprintk(level,args...) \
+ do { if ((debug & level)) printk(args); } while (0)
+
+#define debug_dump(b, l, method) do {\
+ int i; \
+ for (i = 0; i < l; i++) \
+ method("%02x ", b[i]); \
+ method("\n"); \
+} while (0)
+
+#define DEBSTATUS ""
+#else
+#define dprintk(level, args...)
+#define debug_dump(b, l, method)
+#define DEBSTATUS " (debugging is not enabled)"
+#endif
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info,ts=2,"
+ "ctrl=4,i2c=8,v8mem=16 (or-able))." DEBSTATUS);
+#undef DEBSTATUS
+
+#define deb_info(args...) dprintk(0x01, args)
+#define deb_ts(args...) dprintk(0x02, args)
+#define deb_ctrl(args...) dprintk(0x04, args)
+#define deb_i2c(args...) dprintk(0x08, args)
+#define deb_v8(args...) dprintk(0x10, args)
+
+/* JLP 111700: we will include the 1 bit gap between the upper and lower 3 bits
+ * in the IBI address, to make the V8 code simpler.
+ * PCI ADDRESS FORMAT: 0x71C -> 0000 0111 0001 1100 (the six bits used)
+ * in general: 0000 0HHH 000L LL00
+ * IBI ADDRESS FORMAT: RHHH BLLL
+ *
+ * where R is the read(1)/write(0) bit, B is the busy bit
+ * and HHH and LLL are the two sets of three bits from the PCI address.
+ */
+#define B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(usPCI) (u8) \
+ (((usPCI >> 2) & 0x07) + ((usPCI >> 4) & 0x70))
+#define B2C2_FLEX_INTERNALADDR_TO_PCIOFFSET(ucAddr) (u16) \
+ (((ucAddr & 0x07) << 2) + ((ucAddr & 0x70) << 4))
+
+/*
+ * DKT 020228
+ * - forget about this VENDOR_BUFFER_SIZE, read and write register
+ * deal with DWORD or 4 bytes, that should be should from now on
+ * - from now on, we don't support anything older than firm 1.00
+ * I eliminated the write register as a 2 trip of writing hi word and lo word
+ * and force this to write only 4 bytes at a time.
+ * NOTE: this should work with all the firmware from 1.00 and newer
+ */
+static int flexcop_usb_readwrite_dw(struct flexcop_device *fc, u16 wRegOffsPCI, u32 *val, u8 read)
+{
+ struct flexcop_usb *fc_usb = fc->bus_specific;
+ u8 request = read ? B2C2_USB_READ_REG : B2C2_USB_WRITE_REG;
+ u8 request_type = (read ? USB_DIR_IN : USB_DIR_OUT) | USB_TYPE_VENDOR;
+ u8 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI) |
+ (read ? 0x80 : 0);
+
+ int len = usb_control_msg(fc_usb->udev,
+ read ? B2C2_USB_CTRL_PIPE_IN : B2C2_USB_CTRL_PIPE_OUT,
+ request,
+ request_type, /* 0xc0 read or 0x40 write */
+ wAddress,
+ 0,
+ val,
+ sizeof(u32),
+ B2C2_WAIT_FOR_OPERATION_RDW * HZ);
+
+ if (len != sizeof(u32)) {
+ err("error while %s dword from %d (%d).", read ? "reading" :
+ "writing", wAddress, wRegOffsPCI);
+ return -EIO;
+ }
+ return 0;
+}
+/*
+ * DKT 010817 - add support for V8 memory read/write and flash update
+ */
+static int flexcop_usb_v8_memory_req(struct flexcop_usb *fc_usb,
+ flexcop_usb_request_t req, u8 page, u16 wAddress,
+ u8 *pbBuffer, u32 buflen)
+{
+ u8 request_type = USB_TYPE_VENDOR;
+ u16 wIndex;
+ int nWaitTime, pipe, len;
+ wIndex = page << 8;
+
+ switch (req) {
+ case B2C2_USB_READ_V8_MEM:
+ nWaitTime = B2C2_WAIT_FOR_OPERATION_V8READ;
+ request_type |= USB_DIR_IN;
+ pipe = B2C2_USB_CTRL_PIPE_IN;
+ break;
+ case B2C2_USB_WRITE_V8_MEM:
+ wIndex |= pbBuffer[0];
+ request_type |= USB_DIR_OUT;
+ nWaitTime = B2C2_WAIT_FOR_OPERATION_V8WRITE;
+ pipe = B2C2_USB_CTRL_PIPE_OUT;
+ break;
+ case B2C2_USB_FLASH_BLOCK:
+ request_type |= USB_DIR_OUT;
+ nWaitTime = B2C2_WAIT_FOR_OPERATION_V8FLASH;
+ pipe = B2C2_USB_CTRL_PIPE_OUT;
+ break;
+ default:
+ deb_info("unsupported request for v8_mem_req %x.\n", req);
+ return -EINVAL;
+ }
+ deb_v8("v8mem: %02x %02x %04x %04x, len: %d\n", request_type, req,
+ wAddress, wIndex, buflen);
+
+ len = usb_control_msg(fc_usb->udev, pipe,
+ req,
+ request_type,
+ wAddress,
+ wIndex,
+ pbBuffer,
+ buflen,
+ nWaitTime * HZ);
+
+ debug_dump(pbBuffer, len, deb_v8);
+ return len == buflen ? 0 : -EIO;
+}
+
+#define bytes_left_to_read_on_page(paddr,buflen) \
+ ((V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK)) > buflen \
+ ? buflen : (V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK)))
+
+static int flexcop_usb_memory_req(struct flexcop_usb *fc_usb,
+ flexcop_usb_request_t req, flexcop_usb_mem_page_t page_start,
+ u32 addr, int extended, u8 *buf, u32 len)
+{
+ int i,ret = 0;
+ u16 wMax;
+ u32 pagechunk = 0;
+
+ switch(req) {
+ case B2C2_USB_READ_V8_MEM:
+ wMax = USB_MEM_READ_MAX;
+ break;
+ case B2C2_USB_WRITE_V8_MEM:
+ wMax = USB_MEM_WRITE_MAX;
+ break;
+ case B2C2_USB_FLASH_BLOCK:
+ wMax = USB_FLASH_MAX;
+ break;
+ default:
+ return -EINVAL;
+ break;
+ }
+ for (i = 0; i < len;) {
+ pagechunk =
+ wMax < bytes_left_to_read_on_page(addr, len) ?
+ wMax :
+ bytes_left_to_read_on_page(addr, len);
+ deb_info("%x\n",
+ (addr & V8_MEMORY_PAGE_MASK) |
+ (V8_MEMORY_EXTENDED*extended));
+
+ ret = flexcop_usb_v8_memory_req(fc_usb, req,
+ page_start + (addr / V8_MEMORY_PAGE_SIZE),
+ (addr & V8_MEMORY_PAGE_MASK) |
+ (V8_MEMORY_EXTENDED*extended),
+ &buf[i], pagechunk);
+
+ if (ret < 0)
+ return ret;
+ addr += pagechunk;
+ len -= pagechunk;
+ }
+ return 0;
+}
+
+static int flexcop_usb_get_mac_addr(struct flexcop_device *fc, int extended)
+{
+ return flexcop_usb_memory_req(fc->bus_specific, B2C2_USB_READ_V8_MEM,
+ V8_MEMORY_PAGE_FLASH, 0x1f010, 1,
+ fc->dvb_adapter.proposed_mac, 6);
+}
+
+#if 0
+static int flexcop_usb_utility_req(struct flexcop_usb *fc_usb, int set,
+ flexcop_usb_utility_function_t func, u8 extra, u16 wIndex,
+ u16 buflen, u8 *pvBuffer)
+{
+ u16 wValue;
+ u8 request_type = (set ? USB_DIR_OUT : USB_DIR_IN) | USB_TYPE_VENDOR;
+ int nWaitTime = 2,
+ pipe = set ? B2C2_USB_CTRL_PIPE_OUT : B2C2_USB_CTRL_PIPE_IN, len;
+ wValue = (func << 8) | extra;
+
+ len = usb_control_msg(fc_usb->udev,pipe,
+ B2C2_USB_UTILITY,
+ request_type,
+ wValue,
+ wIndex,
+ pvBuffer,
+ buflen,
+ nWaitTime * HZ);
+ return len == buflen ? 0 : -EIO;
+}
+#endif
+
+/* usb i2c stuff */
+static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c,
+ flexcop_usb_request_t req, flexcop_usb_i2c_function_t func,
+ u8 chipaddr, u8 addr, u8 *buf, u8 buflen)
+{
+ struct flexcop_usb *fc_usb = i2c->fc->bus_specific;
+ u16 wValue, wIndex;
+ int nWaitTime,pipe,len;
+ u8 request_type = USB_TYPE_VENDOR;
+
+ switch (func) {
+ case USB_FUNC_I2C_WRITE:
+ case USB_FUNC_I2C_MULTIWRITE:
+ case USB_FUNC_I2C_REPEATWRITE:
+ /* DKT 020208 - add this to support special case of DiSEqC */
+ case USB_FUNC_I2C_CHECKWRITE:
+ pipe = B2C2_USB_CTRL_PIPE_OUT;
+ nWaitTime = 2;
+ request_type |= USB_DIR_OUT;
+ break;
+ case USB_FUNC_I2C_READ:
+ case USB_FUNC_I2C_REPEATREAD:
+ pipe = B2C2_USB_CTRL_PIPE_IN;
+ nWaitTime = 2;
+ request_type |= USB_DIR_IN;
+ break;
+ default:
+ deb_info("unsupported function for i2c_req %x\n", func);
+ return -EINVAL;
+ }
+ wValue = (func << 8) | (i2c->port << 4);
+ wIndex = (chipaddr << 8 ) | addr;
+
+ deb_i2c("i2c %2d: %02x %02x %02x %02x %02x %02x\n",
+ func, request_type, req,
+ wValue & 0xff, wValue >> 8,
+ wIndex & 0xff, wIndex >> 8);
+
+ len = usb_control_msg(fc_usb->udev,pipe,
+ req,
+ request_type,
+ wValue,
+ wIndex,
+ buf,
+ buflen,
+ nWaitTime * HZ);
+ return len == buflen ? 0 : -EREMOTEIO;
+}
+
+/* actual bus specific access functions,
+ make sure prototype are/will be equal to pci */
+static flexcop_ibi_value flexcop_usb_read_ibi_reg(struct flexcop_device *fc,
+ flexcop_ibi_register reg)
+{
+ flexcop_ibi_value val;
+ val.raw = 0;
+ flexcop_usb_readwrite_dw(fc, reg, &val.raw, 1);
+ return val;
+}
+
+static int flexcop_usb_write_ibi_reg(struct flexcop_device *fc,
+ flexcop_ibi_register reg, flexcop_ibi_value val)
+{
+ return flexcop_usb_readwrite_dw(fc, reg, &val.raw, 0);
+}
+
+static int flexcop_usb_i2c_request(struct flexcop_i2c_adapter *i2c,
+ flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len)
+{
+ if (op == FC_READ)
+ return flexcop_usb_i2c_req(i2c, B2C2_USB_I2C_REQUEST,
+ USB_FUNC_I2C_READ, chipaddr, addr, buf, len);
+ else
+ return flexcop_usb_i2c_req(i2c, B2C2_USB_I2C_REQUEST,
+ USB_FUNC_I2C_WRITE, chipaddr, addr, buf, len);
+}
+
+static void flexcop_usb_process_frame(struct flexcop_usb *fc_usb,
+ u8 *buffer, int buffer_length)
+{
+ u8 *b;
+ int l;
+
+ deb_ts("tmp_buffer_length=%d, buffer_length=%d\n",
+ fc_usb->tmp_buffer_length, buffer_length);
+
+ if (fc_usb->tmp_buffer_length > 0) {
+ memcpy(fc_usb->tmp_buffer+fc_usb->tmp_buffer_length, buffer,
+ buffer_length);
+ fc_usb->tmp_buffer_length += buffer_length;
+ b = fc_usb->tmp_buffer;
+ l = fc_usb->tmp_buffer_length;
+ } else {
+ b=buffer;
+ l=buffer_length;
+ }
+
+ while (l >= 190) {
+ if (*b == 0xff) {
+ switch (*(b+1) & 0x03) {
+ case 0x01: /* media packet */
+ if (*(b+2) == 0x47)
+ flexcop_pass_dmx_packets(
+ fc_usb->fc_dev, b+2, 1);
+ else
+ deb_ts("not ts packet %*ph\n", 4, b+2);
+ b += 190;
+ l -= 190;
+ break;
+ default:
+ deb_ts("wrong packet type\n");
+ l = 0;
+ break;
+ }
+ } else {
+ deb_ts("wrong header\n");
+ l = 0;
+ }
+ }
+
+ if (l>0)
+ memcpy(fc_usb->tmp_buffer, b, l);
+ fc_usb->tmp_buffer_length = l;
+}
+
+static void flexcop_usb_urb_complete(struct urb *urb)
+{
+ struct flexcop_usb *fc_usb = urb->context;
+ int i;
+
+ if (urb->actual_length > 0)
+ deb_ts("urb completed, bufsize: %d actlen; %d\n",
+ urb->transfer_buffer_length, urb->actual_length);
+
+ for (i = 0; i < urb->number_of_packets; i++) {
+ if (urb->iso_frame_desc[i].status < 0) {
+ err("iso frame descriptor %d has an error: %d\n", i,
+ urb->iso_frame_desc[i].status);
+ } else
+ if (urb->iso_frame_desc[i].actual_length > 0) {
+ deb_ts("passed %d bytes to the demux\n",
+ urb->iso_frame_desc[i].actual_length);
+
+ flexcop_usb_process_frame(fc_usb,
+ urb->transfer_buffer +
+ urb->iso_frame_desc[i].offset,
+ urb->iso_frame_desc[i].actual_length);
+ }
+ urb->iso_frame_desc[i].status = 0;
+ urb->iso_frame_desc[i].actual_length = 0;
+ }
+ usb_submit_urb(urb,GFP_ATOMIC);
+}
+
+static int flexcop_usb_stream_control(struct flexcop_device *fc, int onoff)
+{
+ /* submit/kill iso packets */
+ return 0;
+}
+
+static void flexcop_usb_transfer_exit(struct flexcop_usb *fc_usb)
+{
+ int i;
+ for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++)
+ if (fc_usb->iso_urb[i] != NULL) {
+ deb_ts("unlinking/killing urb no. %d\n",i);
+ usb_kill_urb(fc_usb->iso_urb[i]);
+ usb_free_urb(fc_usb->iso_urb[i]);
+ }
+
+ if (fc_usb->iso_buffer != NULL)
+ pci_free_consistent(NULL,
+ fc_usb->buffer_size, fc_usb->iso_buffer,
+ fc_usb->dma_addr);
+}
+
+static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb)
+{
+ u16 frame_size = le16_to_cpu(
+ fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize);
+ int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO *
+ frame_size, i, j, ret;
+ int buffer_offset = 0;
+
+ deb_ts("creating %d iso-urbs with %d frames "
+ "each of %d bytes size = %d.\n", B2C2_USB_NUM_ISO_URB,
+ B2C2_USB_FRAMES_PER_ISO, frame_size, bufsize);
+
+ fc_usb->iso_buffer = pci_alloc_consistent(NULL,
+ bufsize, &fc_usb->dma_addr);
+ if (fc_usb->iso_buffer == NULL)
+ return -ENOMEM;
+
+ memset(fc_usb->iso_buffer, 0, bufsize);
+ fc_usb->buffer_size = bufsize;
+
+ /* creating iso urbs */
+ for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) {
+ fc_usb->iso_urb[i] = usb_alloc_urb(B2C2_USB_FRAMES_PER_ISO,
+ GFP_ATOMIC);
+ if (fc_usb->iso_urb[i] == NULL) {
+ ret = -ENOMEM;
+ goto urb_error;
+ }
+ }
+
+ /* initialising and submitting iso urbs */
+ for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) {
+ int frame_offset = 0;
+ struct urb *urb = fc_usb->iso_urb[i];
+ deb_ts("initializing and submitting urb no. %d "
+ "(buf_offset: %d).\n", i, buffer_offset);
+
+ urb->dev = fc_usb->udev;
+ urb->context = fc_usb;
+ urb->complete = flexcop_usb_urb_complete;
+ urb->pipe = B2C2_USB_DATA_PIPE;
+ urb->transfer_flags = URB_ISO_ASAP;
+ urb->interval = 1;
+ urb->number_of_packets = B2C2_USB_FRAMES_PER_ISO;
+ urb->transfer_buffer_length = frame_size * B2C2_USB_FRAMES_PER_ISO;
+ urb->transfer_buffer = fc_usb->iso_buffer + buffer_offset;
+
+ buffer_offset += frame_size * B2C2_USB_FRAMES_PER_ISO;
+ for (j = 0; j < B2C2_USB_FRAMES_PER_ISO; j++) {
+ deb_ts("urb no: %d, frame: %d, frame_offset: %d\n",
+ i, j, frame_offset);
+ urb->iso_frame_desc[j].offset = frame_offset;
+ urb->iso_frame_desc[j].length = frame_size;
+ frame_offset += frame_size;
+ }
+
+ if ((ret = usb_submit_urb(fc_usb->iso_urb[i],GFP_ATOMIC))) {
+ err("submitting urb %d failed with %d.", i, ret);
+ goto urb_error;
+ }
+ deb_ts("submitted urb no. %d.\n",i);
+ }
+
+ /* SRAM */
+ flexcop_sram_set_dest(fc_usb->fc_dev, FC_SRAM_DEST_MEDIA |
+ FC_SRAM_DEST_NET | FC_SRAM_DEST_CAO | FC_SRAM_DEST_CAI,
+ FC_SRAM_DEST_TARGET_WAN_USB);
+ flexcop_wan_set_speed(fc_usb->fc_dev, FC_WAN_SPEED_8MBITS);
+ flexcop_sram_ctrl(fc_usb->fc_dev, 1, 1, 1);
+ return 0;
+
+urb_error:
+ flexcop_usb_transfer_exit(fc_usb);
+ return ret;
+}
+
+static int flexcop_usb_init(struct flexcop_usb *fc_usb)
+{
+ /* use the alternate setting with the larges buffer */
+ usb_set_interface(fc_usb->udev,0,1);
+ switch (fc_usb->udev->speed) {
+ case USB_SPEED_LOW:
+ err("cannot handle USB speed because it is too slow.");
+ return -ENODEV;
+ break;
+ case USB_SPEED_FULL:
+ info("running at FULL speed.");
+ break;
+ case USB_SPEED_HIGH:
+ info("running at HIGH speed.");
+ break;
+ case USB_SPEED_UNKNOWN: /* fall through */
+ default:
+ err("cannot handle USB speed because it is unknown.");
+ return -ENODEV;
+ }
+ usb_set_intfdata(fc_usb->uintf, fc_usb);
+ return 0;
+}
+
+static void flexcop_usb_exit(struct flexcop_usb *fc_usb)
+{
+ usb_set_intfdata(fc_usb->uintf, NULL);
+}
+
+static int flexcop_usb_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct flexcop_usb *fc_usb = NULL;
+ struct flexcop_device *fc = NULL;
+ int ret;
+
+ if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_usb))) == NULL) {
+ err("out of memory\n");
+ return -ENOMEM;
+ }
+
+ /* general flexcop init */
+ fc_usb = fc->bus_specific;
+ fc_usb->fc_dev = fc;
+
+ fc->read_ibi_reg = flexcop_usb_read_ibi_reg;
+ fc->write_ibi_reg = flexcop_usb_write_ibi_reg;
+ fc->i2c_request = flexcop_usb_i2c_request;
+ fc->get_mac_addr = flexcop_usb_get_mac_addr;
+
+ fc->stream_control = flexcop_usb_stream_control;
+
+ fc->pid_filtering = 1;
+ fc->bus_type = FC_USB;
+
+ fc->dev = &udev->dev;
+ fc->owner = THIS_MODULE;
+
+ /* bus specific part */
+ fc_usb->udev = udev;
+ fc_usb->uintf = intf;
+ if ((ret = flexcop_usb_init(fc_usb)) != 0)
+ goto err_kfree;
+
+ /* init flexcop */
+ if ((ret = flexcop_device_initialize(fc)) != 0)
+ goto err_usb_exit;
+
+ /* xfer init */
+ if ((ret = flexcop_usb_transfer_init(fc_usb)) != 0)
+ goto err_fc_exit;
+
+ info("%s successfully initialized and connected.", DRIVER_NAME);
+ return 0;
+
+err_fc_exit:
+ flexcop_device_exit(fc);
+err_usb_exit:
+ flexcop_usb_exit(fc_usb);
+err_kfree:
+ flexcop_device_kfree(fc);
+ return ret;
+}
+
+static void flexcop_usb_disconnect(struct usb_interface *intf)
+{
+ struct flexcop_usb *fc_usb = usb_get_intfdata(intf);
+ flexcop_usb_transfer_exit(fc_usb);
+ flexcop_device_exit(fc_usb->fc_dev);
+ flexcop_usb_exit(fc_usb);
+ flexcop_device_kfree(fc_usb->fc_dev);
+ info("%s successfully deinitialized and disconnected.", DRIVER_NAME);
+}
+
+static struct usb_device_id flexcop_usb_table [] = {
+ { USB_DEVICE(0x0af7, 0x0101) },
+ { }
+};
+MODULE_DEVICE_TABLE (usb, flexcop_usb_table);
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver flexcop_usb_driver = {
+ .name = "b2c2_flexcop_usb",
+ .probe = flexcop_usb_probe,
+ .disconnect = flexcop_usb_disconnect,
+ .id_table = flexcop_usb_table,
+};
+
+module_usb_driver(flexcop_usb_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_NAME);
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/pci/b2c2/flexcop-usb.h b/drivers/media/pci/b2c2/flexcop-usb.h
new file mode 100644
index 000000000000..92529a9c4475
--- /dev/null
+++ b/drivers/media/pci/b2c2/flexcop-usb.h
@@ -0,0 +1,111 @@
+/*
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-usb.h - header file for the USB part
+ * see flexcop.c for copyright information
+ */
+#ifndef __FLEXCOP_USB_H_INCLUDED__
+#define __FLEXCOP_USB_H_INCLUDED__
+
+#include <linux/usb.h>
+
+/* transfer parameters */
+#define B2C2_USB_FRAMES_PER_ISO 4
+#define B2C2_USB_NUM_ISO_URB 4
+
+#define B2C2_USB_CTRL_PIPE_IN usb_rcvctrlpipe(fc_usb->udev, 0)
+#define B2C2_USB_CTRL_PIPE_OUT usb_sndctrlpipe(fc_usb->udev, 0)
+#define B2C2_USB_DATA_PIPE usb_rcvisocpipe(fc_usb->udev, 0x81)
+
+struct flexcop_usb {
+ struct usb_device *udev;
+ struct usb_interface *uintf;
+
+ u8 *iso_buffer;
+ int buffer_size;
+ dma_addr_t dma_addr;
+
+ struct urb *iso_urb[B2C2_USB_NUM_ISO_URB];
+ struct flexcop_device *fc_dev;
+
+ u8 tmp_buffer[1023+190];
+ int tmp_buffer_length;
+};
+
+#if 0
+/* request types TODO What is its use?*/
+typedef enum {
+
+} flexcop_usb_request_type_t;
+#endif
+
+/* request */
+typedef enum {
+ B2C2_USB_WRITE_V8_MEM = 0x04,
+ B2C2_USB_READ_V8_MEM = 0x05,
+ B2C2_USB_READ_REG = 0x08,
+ B2C2_USB_WRITE_REG = 0x0A,
+ B2C2_USB_WRITEREGHI = 0x0B,
+ B2C2_USB_FLASH_BLOCK = 0x10,
+ B2C2_USB_I2C_REQUEST = 0x11,
+ B2C2_USB_UTILITY = 0x12,
+} flexcop_usb_request_t;
+
+/* function definition for I2C_REQUEST */
+typedef enum {
+ USB_FUNC_I2C_WRITE = 0x01,
+ USB_FUNC_I2C_MULTIWRITE = 0x02,
+ USB_FUNC_I2C_READ = 0x03,
+ USB_FUNC_I2C_REPEATWRITE = 0x04,
+ USB_FUNC_GET_DESCRIPTOR = 0x05,
+ USB_FUNC_I2C_REPEATREAD = 0x06,
+ /* DKT 020208 - add this to support special case of DiSEqC */
+ USB_FUNC_I2C_CHECKWRITE = 0x07,
+ USB_FUNC_I2C_CHECKRESULT = 0x08,
+} flexcop_usb_i2c_function_t;
+
+/* function definition for UTILITY request 0x12
+ * DKT 020304 - new utility function */
+typedef enum {
+ UTILITY_SET_FILTER = 0x01,
+ UTILITY_DATA_ENABLE = 0x02,
+ UTILITY_FLEX_MULTIWRITE = 0x03,
+ UTILITY_SET_BUFFER_SIZE = 0x04,
+ UTILITY_FLEX_OPERATOR = 0x05,
+ UTILITY_FLEX_RESET300_START = 0x06,
+ UTILITY_FLEX_RESET300_STOP = 0x07,
+ UTILITY_FLEX_RESET300 = 0x08,
+ UTILITY_SET_ISO_SIZE = 0x09,
+ UTILITY_DATA_RESET = 0x0A,
+ UTILITY_GET_DATA_STATUS = 0x10,
+ UTILITY_GET_V8_REG = 0x11,
+ /* DKT 020326 - add function for v1.14 */
+ UTILITY_SRAM_WRITE = 0x12,
+ UTILITY_SRAM_READ = 0x13,
+ UTILITY_SRAM_TESTFILL = 0x14,
+ UTILITY_SRAM_TESTSET = 0x15,
+ UTILITY_SRAM_TESTVERIFY = 0x16,
+} flexcop_usb_utility_function_t;
+
+#define B2C2_WAIT_FOR_OPERATION_RW (1*HZ)
+#define B2C2_WAIT_FOR_OPERATION_RDW (3*HZ)
+#define B2C2_WAIT_FOR_OPERATION_WDW (1*HZ)
+
+#define B2C2_WAIT_FOR_OPERATION_V8READ (3*HZ)
+#define B2C2_WAIT_FOR_OPERATION_V8WRITE (3*HZ)
+#define B2C2_WAIT_FOR_OPERATION_V8FLASH (3*HZ)
+
+typedef enum {
+ V8_MEMORY_PAGE_DVB_CI = 0x20,
+ V8_MEMORY_PAGE_DVB_DS = 0x40,
+ V8_MEMORY_PAGE_MULTI2 = 0x60,
+ V8_MEMORY_PAGE_FLASH = 0x80
+} flexcop_usb_mem_page_t;
+
+#define V8_MEMORY_EXTENDED (1 << 15)
+#define USB_MEM_READ_MAX 32
+#define USB_MEM_WRITE_MAX 1
+#define USB_FLASH_MAX 8
+#define V8_MEMORY_PAGE_SIZE 0x8000 /* 32K */
+#define V8_MEMORY_PAGE_MASK 0x7FFF
+
+#endif
diff --git a/drivers/media/pci/b2c2/flexcop.c b/drivers/media/pci/b2c2/flexcop.c
new file mode 100644
index 000000000000..b1e8c99f469b
--- /dev/null
+++ b/drivers/media/pci/b2c2/flexcop.c
@@ -0,0 +1,324 @@
+/*
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop.c - main module part
+ * Copyright (C) 2004-9 Patrick Boettcher <patrick.boettcher@desy.de>
+ * based on skystar2-driver Copyright (C) 2003 Vadim Catana, skystar@moldova.cc
+ *
+ * Acknowledgements:
+ * John Jurrius from BBTI, Inc. for extensive support
+ * with code examples and data books
+ * Bjarne Steinsbo, bjarne at steinsbo.com (some ideas for rewriting)
+ *
+ * Contributions to the skystar2-driver have been done by
+ * Vincenzo Di Massa, hawk.it at tiscalinet.it (several DiSEqC fixes)
+ * Roberto Ragusa, r.ragusa at libero.it (polishing, restyling the code)
+ * Uwe Bugla, uwe.bugla at gmx.de (doing tests, restyling code, writing docu)
+ * Niklas Peinecke, peinecke at gdv.uni-hannover.de (hardware pid/mac
+ * filtering)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include "flexcop.h"
+
+#define DRIVER_NAME "B2C2 FlexcopII/II(b)/III digital TV receiver chip"
+#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de"
+
+#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
+#define DEBSTATUS ""
+#else
+#define DEBSTATUS " (debugging is not enabled)"
+#endif
+
+int b2c2_flexcop_debug;
+module_param_named(debug, b2c2_flexcop_debug, int, 0644);
+MODULE_PARM_DESC(debug,
+ "set debug level (1=info,2=tuner,4=i2c,8=ts,"
+ "16=sram,32=reg (|-able))."
+ DEBSTATUS);
+#undef DEBSTATUS
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+/* global zero for ibi values */
+flexcop_ibi_value ibi_zero;
+
+static int flexcop_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct flexcop_device *fc = dvbdmxfeed->demux->priv;
+ return flexcop_pid_feed_control(fc, dvbdmxfeed, 1);
+}
+
+static int flexcop_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct flexcop_device *fc = dvbdmxfeed->demux->priv;
+ return flexcop_pid_feed_control(fc, dvbdmxfeed, 0);
+}
+
+static int flexcop_dvb_init(struct flexcop_device *fc)
+{
+ int ret = dvb_register_adapter(&fc->dvb_adapter,
+ "FlexCop Digital TV device", fc->owner,
+ fc->dev, adapter_nr);
+ if (ret < 0) {
+ err("error registering DVB adapter");
+ return ret;
+ }
+ fc->dvb_adapter.priv = fc;
+
+ fc->demux.dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING
+ | DMX_MEMORY_BASED_FILTERING);
+ fc->demux.priv = fc;
+ fc->demux.filternum = fc->demux.feednum = FC_MAX_FEED;
+ fc->demux.start_feed = flexcop_dvb_start_feed;
+ fc->demux.stop_feed = flexcop_dvb_stop_feed;
+ fc->demux.write_to_decoder = NULL;
+
+ ret = dvb_dmx_init(&fc->demux);
+ if (ret < 0) {
+ err("dvb_dmx failed: error %d", ret);
+ goto err_dmx;
+ }
+
+ fc->hw_frontend.source = DMX_FRONTEND_0;
+
+ fc->dmxdev.filternum = fc->demux.feednum;
+ fc->dmxdev.demux = &fc->demux.dmx;
+ fc->dmxdev.capabilities = 0;
+ ret = dvb_dmxdev_init(&fc->dmxdev, &fc->dvb_adapter);
+ if (ret < 0) {
+ err("dvb_dmxdev_init failed: error %d", ret);
+ goto err_dmx_dev;
+ }
+
+ ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->hw_frontend);
+ if (ret < 0) {
+ err("adding hw_frontend to dmx failed: error %d", ret);
+ goto err_dmx_add_hw_frontend;
+ }
+
+ fc->mem_frontend.source = DMX_MEMORY_FE;
+ ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->mem_frontend);
+ if (ret < 0) {
+ err("adding mem_frontend to dmx failed: error %d", ret);
+ goto err_dmx_add_mem_frontend;
+ }
+
+ ret = fc->demux.dmx.connect_frontend(&fc->demux.dmx, &fc->hw_frontend);
+ if (ret < 0) {
+ err("connect frontend failed: error %d", ret);
+ goto err_connect_frontend;
+ }
+
+ ret = dvb_net_init(&fc->dvb_adapter, &fc->dvbnet, &fc->demux.dmx);
+ if (ret < 0) {
+ err("dvb_net_init failed: error %d", ret);
+ goto err_net;
+ }
+
+ fc->init_state |= FC_STATE_DVB_INIT;
+ return 0;
+
+err_net:
+ fc->demux.dmx.disconnect_frontend(&fc->demux.dmx);
+err_connect_frontend:
+ fc->demux.dmx.remove_frontend(&fc->demux.dmx, &fc->mem_frontend);
+err_dmx_add_mem_frontend:
+ fc->demux.dmx.remove_frontend(&fc->demux.dmx, &fc->hw_frontend);
+err_dmx_add_hw_frontend:
+ dvb_dmxdev_release(&fc->dmxdev);
+err_dmx_dev:
+ dvb_dmx_release(&fc->demux);
+err_dmx:
+ dvb_unregister_adapter(&fc->dvb_adapter);
+ return ret;
+}
+
+static void flexcop_dvb_exit(struct flexcop_device *fc)
+{
+ if (fc->init_state & FC_STATE_DVB_INIT) {
+ dvb_net_release(&fc->dvbnet);
+
+ fc->demux.dmx.close(&fc->demux.dmx);
+ fc->demux.dmx.remove_frontend(&fc->demux.dmx,
+ &fc->mem_frontend);
+ fc->demux.dmx.remove_frontend(&fc->demux.dmx,
+ &fc->hw_frontend);
+ dvb_dmxdev_release(&fc->dmxdev);
+ dvb_dmx_release(&fc->demux);
+ dvb_unregister_adapter(&fc->dvb_adapter);
+ deb_info("deinitialized dvb stuff\n");
+ }
+ fc->init_state &= ~FC_STATE_DVB_INIT;
+}
+
+/* these methods are necessary to achieve the long-term-goal of hiding the
+ * struct flexcop_device from the bus-parts */
+void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len)
+{
+ dvb_dmx_swfilter(&fc->demux, buf, len);
+}
+EXPORT_SYMBOL(flexcop_pass_dmx_data);
+
+void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no)
+{
+ dvb_dmx_swfilter_packets(&fc->demux, buf, no);
+}
+EXPORT_SYMBOL(flexcop_pass_dmx_packets);
+
+static void flexcop_reset(struct flexcop_device *fc)
+{
+ flexcop_ibi_value v210, v204;
+
+ /* reset the flexcop itself */
+ fc->write_ibi_reg(fc,ctrl_208,ibi_zero);
+
+ v210.raw = 0;
+ v210.sw_reset_210.reset_block_000 = 1;
+ v210.sw_reset_210.reset_block_100 = 1;
+ v210.sw_reset_210.reset_block_200 = 1;
+ v210.sw_reset_210.reset_block_300 = 1;
+ v210.sw_reset_210.reset_block_400 = 1;
+ v210.sw_reset_210.reset_block_500 = 1;
+ v210.sw_reset_210.reset_block_600 = 1;
+ v210.sw_reset_210.reset_block_700 = 1;
+ v210.sw_reset_210.Block_reset_enable = 0xb2;
+ v210.sw_reset_210.Special_controls = 0xc259;
+ fc->write_ibi_reg(fc,sw_reset_210,v210);
+ msleep(1);
+
+ /* reset the periphical devices */
+
+ v204 = fc->read_ibi_reg(fc,misc_204);
+ v204.misc_204.Per_reset_sig = 0;
+ fc->write_ibi_reg(fc,misc_204,v204);
+ msleep(1);
+ v204.misc_204.Per_reset_sig = 1;
+ fc->write_ibi_reg(fc,misc_204,v204);
+}
+
+void flexcop_reset_block_300(struct flexcop_device *fc)
+{
+ flexcop_ibi_value v208_save = fc->read_ibi_reg(fc, ctrl_208),
+ v210 = fc->read_ibi_reg(fc, sw_reset_210);
+
+ deb_rdump("208: %08x, 210: %08x\n", v208_save.raw, v210.raw);
+ fc->write_ibi_reg(fc,ctrl_208,ibi_zero);
+
+ v210.sw_reset_210.reset_block_300 = 1;
+ v210.sw_reset_210.Block_reset_enable = 0xb2;
+
+ fc->write_ibi_reg(fc,sw_reset_210,v210);
+ fc->write_ibi_reg(fc,ctrl_208,v208_save);
+}
+
+struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len)
+{
+ void *bus;
+ struct flexcop_device *fc = kzalloc(sizeof(struct flexcop_device),
+ GFP_KERNEL);
+ if (!fc) {
+ err("no memory");
+ return NULL;
+ }
+
+ bus = kzalloc(bus_specific_len, GFP_KERNEL);
+ if (!bus) {
+ err("no memory");
+ kfree(fc);
+ return NULL;
+ }
+
+ fc->bus_specific = bus;
+
+ return fc;
+}
+EXPORT_SYMBOL(flexcop_device_kmalloc);
+
+void flexcop_device_kfree(struct flexcop_device *fc)
+{
+ kfree(fc->bus_specific);
+ kfree(fc);
+}
+EXPORT_SYMBOL(flexcop_device_kfree);
+
+int flexcop_device_initialize(struct flexcop_device *fc)
+{
+ int ret;
+ ibi_zero.raw = 0;
+
+ flexcop_reset(fc);
+ flexcop_determine_revision(fc);
+ flexcop_sram_init(fc);
+ flexcop_hw_filter_init(fc);
+ flexcop_smc_ctrl(fc, 0);
+
+ ret = flexcop_dvb_init(fc);
+ if (ret)
+ goto error;
+
+ /* i2c has to be done before doing EEProm stuff -
+ * because the EEProm is accessed via i2c */
+ ret = flexcop_i2c_init(fc);
+ if (ret)
+ goto error;
+
+ /* do the MAC address reading after initializing the dvb_adapter */
+ if (fc->get_mac_addr(fc, 0) == 0) {
+ u8 *b = fc->dvb_adapter.proposed_mac;
+ info("MAC address = %pM", b);
+ flexcop_set_mac_filter(fc,b);
+ flexcop_mac_filter_ctrl(fc,1);
+ } else
+ warn("reading of MAC address failed.\n");
+
+ ret = flexcop_frontend_init(fc);
+ if (ret)
+ goto error;
+
+ flexcop_device_name(fc,"initialization of","complete");
+ return 0;
+
+error:
+ flexcop_device_exit(fc);
+ return ret;
+}
+EXPORT_SYMBOL(flexcop_device_initialize);
+
+void flexcop_device_exit(struct flexcop_device *fc)
+{
+ flexcop_frontend_exit(fc);
+ flexcop_i2c_exit(fc);
+ flexcop_dvb_exit(fc);
+}
+EXPORT_SYMBOL(flexcop_device_exit);
+
+static int flexcop_module_init(void)
+{
+ info(DRIVER_NAME " loaded successfully");
+ return 0;
+}
+
+static void flexcop_module_cleanup(void)
+{
+ info(DRIVER_NAME " unloaded successfully");
+}
+
+module_init(flexcop_module_init);
+module_exit(flexcop_module_cleanup);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_NAME);
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/pci/b2c2/flexcop.h b/drivers/media/pci/b2c2/flexcop.h
new file mode 100644
index 000000000000..897b10c85ad9
--- /dev/null
+++ b/drivers/media/pci/b2c2/flexcop.h
@@ -0,0 +1,29 @@
+/*
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop.h - private header file for all flexcop-chip-source files
+ * see flexcop.c for copyright information
+ */
+#ifndef __FLEXCOP_H__
+#define __FLEXCOP_H___
+
+#define FC_LOG_PREFIX "b2c2-flexcop"
+#include "flexcop-common.h"
+
+extern int b2c2_flexcop_debug;
+
+/* debug */
+#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
+#define dprintk(level,args...) \
+ do { if ((b2c2_flexcop_debug & level)) printk(args); } while (0)
+#else
+#define dprintk(level,args...)
+#endif
+
+#define deb_info(args...) dprintk(0x01, args)
+#define deb_tuner(args...) dprintk(0x02, args)
+#define deb_i2c(args...) dprintk(0x04, args)
+#define deb_ts(args...) dprintk(0x08, args)
+#define deb_sram(args...) dprintk(0x10, args)
+#define deb_rdump(args...) dprintk(0x20, args)
+
+#endif
diff --git a/drivers/media/pci/b2c2/flexcop_ibi_value_be.h b/drivers/media/pci/b2c2/flexcop_ibi_value_be.h
new file mode 100644
index 000000000000..8f64bdbd72bb
--- /dev/null
+++ b/drivers/media/pci/b2c2/flexcop_ibi_value_be.h
@@ -0,0 +1,455 @@
+/* Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * register descriptions
+ * see flexcop.c for copyright information
+ */
+/* This file is automatically generated, do not edit things here. */
+#ifndef __FLEXCOP_IBI_VALUE_INCLUDED__
+#define __FLEXCOP_IBI_VALUE_INCLUDED__
+
+typedef union {
+ u32 raw;
+
+ struct {
+ u32 dma_address0 :30;
+ u32 dma_0No_update : 1;
+ u32 dma_0start : 1;
+ } dma_0x0;
+
+ struct {
+ u32 dma_addr_size :24;
+ u32 DMA_maxpackets : 8;
+ } dma_0x4_remap;
+
+ struct {
+ u32 dma_addr_size :24;
+ u32 unused : 1;
+ u32 dma1timer : 7;
+ } dma_0x4_read;
+
+ struct {
+ u32 dma_addr_size :24;
+ u32 dmatimer : 7;
+ u32 unused : 1;
+ } dma_0x4_write;
+
+ struct {
+ u32 dma_cur_addr :30;
+ u32 unused : 2;
+ } dma_0x8;
+
+ struct {
+ u32 dma_address1 :30;
+ u32 remap_enable : 1;
+ u32 dma_1start : 1;
+ } dma_0xc;
+
+ struct {
+ u32 st_done : 1;
+ u32 no_base_addr_ack_error : 1;
+ u32 twoWS_port_reg : 2;
+ u32 total_bytes : 2;
+ u32 twoWS_rw : 1;
+ u32 working_start : 1;
+ u32 data1_reg : 8;
+ u32 baseaddr : 8;
+ u32 reserved1 : 1;
+ u32 chipaddr : 7;
+ } tw_sm_c_100;
+
+ struct {
+ u32 unused : 6;
+ u32 force_stop : 1;
+ u32 exlicit_stops : 1;
+ u32 data4_reg : 8;
+ u32 data3_reg : 8;
+ u32 data2_reg : 8;
+ } tw_sm_c_104;
+
+ struct {
+ u32 reserved2 :19;
+ u32 tlo1 : 5;
+ u32 reserved1 : 2;
+ u32 thi1 : 6;
+ } tw_sm_c_108;
+
+ struct {
+ u32 reserved2 :19;
+ u32 tlo1 : 5;
+ u32 reserved1 : 2;
+ u32 thi1 : 6;
+ } tw_sm_c_10c;
+
+ struct {
+ u32 reserved2 :19;
+ u32 tlo1 : 5;
+ u32 reserved1 : 2;
+ u32 thi1 : 6;
+ } tw_sm_c_110;
+
+ struct {
+ u32 LNB_CTLPrescaler_sig : 2;
+ u32 LNB_CTLLowCount_sig :15;
+ u32 LNB_CTLHighCount_sig :15;
+ } lnb_switch_freq_200;
+
+ struct {
+ u32 Rev_N_sig_reserved2 : 1;
+ u32 Rev_N_sig_caps : 1;
+ u32 Rev_N_sig_reserved1 : 2;
+ u32 Rev_N_sig_revision_hi : 4;
+ u32 reserved :20;
+ u32 Per_reset_sig : 1;
+ u32 LNB_L_H_sig : 1;
+ u32 ACPI3_sig : 1;
+ u32 ACPI1_sig : 1;
+ } misc_204;
+
+ struct {
+ u32 unused : 9;
+ u32 Mailbox_from_V8_Enable_sig : 1;
+ u32 DMA2_Size_IRQ_Enable_sig : 1;
+ u32 DMA1_Size_IRQ_Enable_sig : 1;
+ u32 DMA2_Timer_Enable_sig : 1;
+ u32 DMA2_IRQ_Enable_sig : 1;
+ u32 DMA1_Timer_Enable_sig : 1;
+ u32 DMA1_IRQ_Enable_sig : 1;
+ u32 Rcv_Data_sig : 1;
+ u32 MAC_filter_Mode_sig : 1;
+ u32 Multi2_Enable_sig : 1;
+ u32 Per_CA_Enable_sig : 1;
+ u32 SMC_Enable_sig : 1;
+ u32 CA_Enable_sig : 1;
+ u32 WAN_CA_Enable_sig : 1;
+ u32 WAN_Enable_sig : 1;
+ u32 Mask_filter_sig : 1;
+ u32 Null_filter_sig : 1;
+ u32 ECM_filter_sig : 1;
+ u32 EMM_filter_sig : 1;
+ u32 PMT_filter_sig : 1;
+ u32 PCR_filter_sig : 1;
+ u32 Stream2_filter_sig : 1;
+ u32 Stream1_filter_sig : 1;
+ } ctrl_208;
+
+ struct {
+ u32 reserved :21;
+ u32 Transport_Error : 1;
+ u32 LLC_SNAP_FLAG_set : 1;
+ u32 Continuity_error_flag : 1;
+ u32 Data_receiver_error : 1;
+ u32 Mailbox_from_V8_Status_sig : 1;
+ u32 DMA2_Size_IRQ_Status : 1;
+ u32 DMA1_Size_IRQ_Status : 1;
+ u32 DMA2_Timer_Status : 1;
+ u32 DMA2_IRQ_Status : 1;
+ u32 DMA1_Timer_Status : 1;
+ u32 DMA1_IRQ_Status : 1;
+ } irq_20c;
+
+ struct {
+ u32 Special_controls :16;
+ u32 Block_reset_enable : 8;
+ u32 reset_block_700 : 1;
+ u32 reset_block_600 : 1;
+ u32 reset_block_500 : 1;
+ u32 reset_block_400 : 1;
+ u32 reset_block_300 : 1;
+ u32 reset_block_200 : 1;
+ u32 reset_block_100 : 1;
+ u32 reset_block_000 : 1;
+ } sw_reset_210;
+
+ struct {
+ u32 unused2 :20;
+ u32 polarity_PS_ERR_sig : 1;
+ u32 polarity_PS_SYNC_sig : 1;
+ u32 polarity_PS_VALID_sig : 1;
+ u32 polarity_PS_CLK_sig : 1;
+ u32 unused1 : 3;
+ u32 s2p_sel_sig : 1;
+ u32 section_pkg_enable_sig : 1;
+ u32 halt_V8_sig : 1;
+ u32 v2WS_oe_sig : 1;
+ u32 vuart_oe_sig : 1;
+ } misc_214;
+
+ struct {
+ u32 Mailbox_from_V8 :32;
+ } mbox_v8_to_host_218;
+
+ struct {
+ u32 sysramaccess_busmuster : 1;
+ u32 sysramaccess_write : 1;
+ u32 unused : 7;
+ u32 sysramaccess_addr :15;
+ u32 sysramaccess_data : 8;
+ } mbox_host_to_v8_21c;
+
+ struct {
+ u32 debug_fifo_problem : 1;
+ u32 debug_flag_write_status00 : 1;
+ u32 Stream2_trans : 1;
+ u32 Stream2_PID :13;
+ u32 debug_flag_pid_saved : 1;
+ u32 MAC_Multicast_filter : 1;
+ u32 Stream1_trans : 1;
+ u32 Stream1_PID :13;
+ } pid_filter_300;
+
+ struct {
+ u32 reserved : 2;
+ u32 PMT_trans : 1;
+ u32 PMT_PID :13;
+ u32 debug_overrun2 : 1;
+ u32 debug_overrun3 : 1;
+ u32 PCR_trans : 1;
+ u32 PCR_PID :13;
+ } pid_filter_304;
+
+ struct {
+ u32 reserved : 2;
+ u32 ECM_trans : 1;
+ u32 ECM_PID :13;
+ u32 EMM_filter_6 : 1;
+ u32 EMM_filter_4 : 1;
+ u32 EMM_trans : 1;
+ u32 EMM_PID :13;
+ } pid_filter_308;
+
+ struct {
+ u32 unused2 : 3;
+ u32 Group_mask :13;
+ u32 unused1 : 2;
+ u32 Group_trans : 1;
+ u32 Group_PID :13;
+ } pid_filter_30c_ext_ind_0_7;
+
+ struct {
+ u32 unused :15;
+ u32 net_master_read :17;
+ } pid_filter_30c_ext_ind_1;
+
+ struct {
+ u32 unused :15;
+ u32 net_master_write :17;
+ } pid_filter_30c_ext_ind_2;
+
+ struct {
+ u32 unused :15;
+ u32 next_net_master_write :17;
+ } pid_filter_30c_ext_ind_3;
+
+ struct {
+ u32 reserved2 : 5;
+ u32 stack_read :10;
+ u32 reserved1 : 6;
+ u32 state_write :10;
+ u32 unused1 : 1;
+ } pid_filter_30c_ext_ind_4;
+
+ struct {
+ u32 unused :22;
+ u32 stack_cnt :10;
+ } pid_filter_30c_ext_ind_5;
+
+ struct {
+ u32 unused : 4;
+ u32 data_size_reg :12;
+ u32 write_status4 : 2;
+ u32 write_status1 : 2;
+ u32 pid_fsm_save_reg300 : 2;
+ u32 pid_fsm_save_reg4 : 2;
+ u32 pid_fsm_save_reg3 : 2;
+ u32 pid_fsm_save_reg2 : 2;
+ u32 pid_fsm_save_reg1 : 2;
+ u32 pid_fsm_save_reg0 : 2;
+ } pid_filter_30c_ext_ind_6;
+
+ struct {
+ u32 unused :22;
+ u32 pass_alltables : 1;
+ u32 AB_select : 1;
+ u32 extra_index_reg : 3;
+ u32 index_reg : 5;
+ } index_reg_310;
+
+ struct {
+ u32 reserved :17;
+ u32 PID_enable_bit : 1;
+ u32 PID_trans : 1;
+ u32 PID :13;
+ } pid_n_reg_314;
+
+ struct {
+ u32 reserved : 6;
+ u32 HighAB_bit : 1;
+ u32 Enable_bit : 1;
+ u32 A6_byte : 8;
+ u32 A5_byte : 8;
+ u32 A4_byte : 8;
+ } mac_low_reg_318;
+
+ struct {
+ u32 reserved : 8;
+ u32 A3_byte : 8;
+ u32 A2_byte : 8;
+ u32 A1_byte : 8;
+ } mac_high_reg_31c;
+
+ struct {
+ u32 data_Tag_ID :16;
+ u32 reserved :16;
+ } data_tag_400;
+
+ struct {
+ u32 Card_IDbyte3 : 8;
+ u32 Card_IDbyte4 : 8;
+ u32 Card_IDbyte5 : 8;
+ u32 Card_IDbyte6 : 8;
+ } card_id_408;
+
+ struct {
+ u32 Card_IDbyte1 : 8;
+ u32 Card_IDbyte2 : 8;
+ } card_id_40c;
+
+ struct {
+ u32 MAC6 : 8;
+ u32 MAC3 : 8;
+ u32 MAC2 : 8;
+ u32 MAC1 : 8;
+ } mac_address_418;
+
+ struct {
+ u32 reserved :16;
+ u32 MAC8 : 8;
+ u32 MAC7 : 8;
+ } mac_address_41c;
+
+ struct {
+ u32 reserved :21;
+ u32 txbuffempty : 1;
+ u32 ReceiveByteFrameError : 1;
+ u32 ReceiveDataReady : 1;
+ u32 transmitter_data_byte : 8;
+ } ci_600;
+
+ struct {
+ u32 pi_component_reg : 3;
+ u32 pi_rw : 1;
+ u32 pi_ha :20;
+ u32 pi_d : 8;
+ } pi_604;
+
+ struct {
+ u32 pi_busy_n : 1;
+ u32 pi_wait_n : 1;
+ u32 pi_timeout_status : 1;
+ u32 pi_CiMax_IRQ_n : 1;
+ u32 config_cclk : 1;
+ u32 config_cs_n : 1;
+ u32 config_wr_n : 1;
+ u32 config_Prog_n : 1;
+ u32 config_Init_stat : 1;
+ u32 config_Done_stat : 1;
+ u32 pcmcia_b_mod_pwr_n : 1;
+ u32 pcmcia_a_mod_pwr_n : 1;
+ u32 reserved : 3;
+ u32 Timer_addr : 5;
+ u32 unused : 1;
+ u32 timer_data : 7;
+ u32 Timer_Load_req : 1;
+ u32 Timer_Read_req : 1;
+ u32 oncecycle_read : 1;
+ u32 serialReset : 1;
+ } pi_608;
+
+ struct {
+ u32 reserved : 6;
+ u32 rw_flag : 1;
+ u32 dvb_en : 1;
+ u32 key_array_row : 5;
+ u32 key_array_col : 3;
+ u32 key_code : 2;
+ u32 key_enable : 1;
+ u32 PID :13;
+ } dvb_reg_60c;
+
+ struct {
+ u32 start_sram_ibi : 1;
+ u32 reserved2 : 1;
+ u32 ce_pin_reg : 1;
+ u32 oe_pin_reg : 1;
+ u32 reserved1 : 3;
+ u32 sc_xfer_bit : 1;
+ u32 sram_data : 8;
+ u32 sram_rw : 1;
+ u32 sram_addr :15;
+ } sram_ctrl_reg_700;
+
+ struct {
+ u32 net_addr_write :16;
+ u32 net_addr_read :16;
+ } net_buf_reg_704;
+
+ struct {
+ u32 cai_cnt : 4;
+ u32 reserved2 : 6;
+ u32 cai_write :11;
+ u32 reserved1 : 5;
+ u32 cai_read :11;
+ } cai_buf_reg_708;
+
+ struct {
+ u32 cao_cnt : 4;
+ u32 reserved2 : 6;
+ u32 cap_write :11;
+ u32 reserved1 : 5;
+ u32 cao_read :11;
+ } cao_buf_reg_70c;
+
+ struct {
+ u32 media_cnt : 4;
+ u32 reserved2 : 6;
+ u32 media_write :11;
+ u32 reserved1 : 5;
+ u32 media_read :11;
+ } media_buf_reg_710;
+
+ struct {
+ u32 reserved :17;
+ u32 ctrl_maximumfill : 1;
+ u32 ctrl_sramdma : 1;
+ u32 ctrl_usb_wan : 1;
+ u32 cao_ovflow_error : 1;
+ u32 cai_ovflow_error : 1;
+ u32 media_ovflow_error : 1;
+ u32 net_ovflow_error : 1;
+ u32 MEDIA_Dest : 2;
+ u32 CAO_Dest : 2;
+ u32 CAI_Dest : 2;
+ u32 NET_Dest : 2;
+ } sram_dest_reg_714;
+
+ struct {
+ u32 reserved3 :11;
+ u32 net_addr_write : 1;
+ u32 reserved2 : 3;
+ u32 net_addr_read : 1;
+ u32 reserved1 : 4;
+ u32 net_cnt :12;
+ } net_buf_reg_718;
+
+ struct {
+ u32 reserved3 : 4;
+ u32 wan_pkt_frame : 4;
+ u32 reserved2 : 4;
+ u32 sram_memmap : 2;
+ u32 sram_chip : 2;
+ u32 wan_wait_state : 8;
+ u32 reserved1 : 6;
+ u32 wan_speed_sig : 2;
+ } wan_ctrl_reg_71c;
+} flexcop_ibi_value;
+
+#endif
diff --git a/drivers/media/pci/b2c2/flexcop_ibi_value_le.h b/drivers/media/pci/b2c2/flexcop_ibi_value_le.h
new file mode 100644
index 000000000000..c75830d7d942
--- /dev/null
+++ b/drivers/media/pci/b2c2/flexcop_ibi_value_le.h
@@ -0,0 +1,455 @@
+/* Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * register descriptions
+ * see flexcop.c for copyright information
+ */
+/* This file is automatically generated, do not edit things here. */
+#ifndef __FLEXCOP_IBI_VALUE_INCLUDED__
+#define __FLEXCOP_IBI_VALUE_INCLUDED__
+
+typedef union {
+ u32 raw;
+
+ struct {
+ u32 dma_0start : 1;
+ u32 dma_0No_update : 1;
+ u32 dma_address0 :30;
+ } dma_0x0;
+
+ struct {
+ u32 DMA_maxpackets : 8;
+ u32 dma_addr_size :24;
+ } dma_0x4_remap;
+
+ struct {
+ u32 dma1timer : 7;
+ u32 unused : 1;
+ u32 dma_addr_size :24;
+ } dma_0x4_read;
+
+ struct {
+ u32 unused : 1;
+ u32 dmatimer : 7;
+ u32 dma_addr_size :24;
+ } dma_0x4_write;
+
+ struct {
+ u32 unused : 2;
+ u32 dma_cur_addr :30;
+ } dma_0x8;
+
+ struct {
+ u32 dma_1start : 1;
+ u32 remap_enable : 1;
+ u32 dma_address1 :30;
+ } dma_0xc;
+
+ struct {
+ u32 chipaddr : 7;
+ u32 reserved1 : 1;
+ u32 baseaddr : 8;
+ u32 data1_reg : 8;
+ u32 working_start : 1;
+ u32 twoWS_rw : 1;
+ u32 total_bytes : 2;
+ u32 twoWS_port_reg : 2;
+ u32 no_base_addr_ack_error : 1;
+ u32 st_done : 1;
+ } tw_sm_c_100;
+
+ struct {
+ u32 data2_reg : 8;
+ u32 data3_reg : 8;
+ u32 data4_reg : 8;
+ u32 exlicit_stops : 1;
+ u32 force_stop : 1;
+ u32 unused : 6;
+ } tw_sm_c_104;
+
+ struct {
+ u32 thi1 : 6;
+ u32 reserved1 : 2;
+ u32 tlo1 : 5;
+ u32 reserved2 :19;
+ } tw_sm_c_108;
+
+ struct {
+ u32 thi1 : 6;
+ u32 reserved1 : 2;
+ u32 tlo1 : 5;
+ u32 reserved2 :19;
+ } tw_sm_c_10c;
+
+ struct {
+ u32 thi1 : 6;
+ u32 reserved1 : 2;
+ u32 tlo1 : 5;
+ u32 reserved2 :19;
+ } tw_sm_c_110;
+
+ struct {
+ u32 LNB_CTLHighCount_sig :15;
+ u32 LNB_CTLLowCount_sig :15;
+ u32 LNB_CTLPrescaler_sig : 2;
+ } lnb_switch_freq_200;
+
+ struct {
+ u32 ACPI1_sig : 1;
+ u32 ACPI3_sig : 1;
+ u32 LNB_L_H_sig : 1;
+ u32 Per_reset_sig : 1;
+ u32 reserved :20;
+ u32 Rev_N_sig_revision_hi : 4;
+ u32 Rev_N_sig_reserved1 : 2;
+ u32 Rev_N_sig_caps : 1;
+ u32 Rev_N_sig_reserved2 : 1;
+ } misc_204;
+
+ struct {
+ u32 Stream1_filter_sig : 1;
+ u32 Stream2_filter_sig : 1;
+ u32 PCR_filter_sig : 1;
+ u32 PMT_filter_sig : 1;
+ u32 EMM_filter_sig : 1;
+ u32 ECM_filter_sig : 1;
+ u32 Null_filter_sig : 1;
+ u32 Mask_filter_sig : 1;
+ u32 WAN_Enable_sig : 1;
+ u32 WAN_CA_Enable_sig : 1;
+ u32 CA_Enable_sig : 1;
+ u32 SMC_Enable_sig : 1;
+ u32 Per_CA_Enable_sig : 1;
+ u32 Multi2_Enable_sig : 1;
+ u32 MAC_filter_Mode_sig : 1;
+ u32 Rcv_Data_sig : 1;
+ u32 DMA1_IRQ_Enable_sig : 1;
+ u32 DMA1_Timer_Enable_sig : 1;
+ u32 DMA2_IRQ_Enable_sig : 1;
+ u32 DMA2_Timer_Enable_sig : 1;
+ u32 DMA1_Size_IRQ_Enable_sig : 1;
+ u32 DMA2_Size_IRQ_Enable_sig : 1;
+ u32 Mailbox_from_V8_Enable_sig : 1;
+ u32 unused : 9;
+ } ctrl_208;
+
+ struct {
+ u32 DMA1_IRQ_Status : 1;
+ u32 DMA1_Timer_Status : 1;
+ u32 DMA2_IRQ_Status : 1;
+ u32 DMA2_Timer_Status : 1;
+ u32 DMA1_Size_IRQ_Status : 1;
+ u32 DMA2_Size_IRQ_Status : 1;
+ u32 Mailbox_from_V8_Status_sig : 1;
+ u32 Data_receiver_error : 1;
+ u32 Continuity_error_flag : 1;
+ u32 LLC_SNAP_FLAG_set : 1;
+ u32 Transport_Error : 1;
+ u32 reserved :21;
+ } irq_20c;
+
+ struct {
+ u32 reset_block_000 : 1;
+ u32 reset_block_100 : 1;
+ u32 reset_block_200 : 1;
+ u32 reset_block_300 : 1;
+ u32 reset_block_400 : 1;
+ u32 reset_block_500 : 1;
+ u32 reset_block_600 : 1;
+ u32 reset_block_700 : 1;
+ u32 Block_reset_enable : 8;
+ u32 Special_controls :16;
+ } sw_reset_210;
+
+ struct {
+ u32 vuart_oe_sig : 1;
+ u32 v2WS_oe_sig : 1;
+ u32 halt_V8_sig : 1;
+ u32 section_pkg_enable_sig : 1;
+ u32 s2p_sel_sig : 1;
+ u32 unused1 : 3;
+ u32 polarity_PS_CLK_sig : 1;
+ u32 polarity_PS_VALID_sig : 1;
+ u32 polarity_PS_SYNC_sig : 1;
+ u32 polarity_PS_ERR_sig : 1;
+ u32 unused2 :20;
+ } misc_214;
+
+ struct {
+ u32 Mailbox_from_V8 :32;
+ } mbox_v8_to_host_218;
+
+ struct {
+ u32 sysramaccess_data : 8;
+ u32 sysramaccess_addr :15;
+ u32 unused : 7;
+ u32 sysramaccess_write : 1;
+ u32 sysramaccess_busmuster : 1;
+ } mbox_host_to_v8_21c;
+
+ struct {
+ u32 Stream1_PID :13;
+ u32 Stream1_trans : 1;
+ u32 MAC_Multicast_filter : 1;
+ u32 debug_flag_pid_saved : 1;
+ u32 Stream2_PID :13;
+ u32 Stream2_trans : 1;
+ u32 debug_flag_write_status00 : 1;
+ u32 debug_fifo_problem : 1;
+ } pid_filter_300;
+
+ struct {
+ u32 PCR_PID :13;
+ u32 PCR_trans : 1;
+ u32 debug_overrun3 : 1;
+ u32 debug_overrun2 : 1;
+ u32 PMT_PID :13;
+ u32 PMT_trans : 1;
+ u32 reserved : 2;
+ } pid_filter_304;
+
+ struct {
+ u32 EMM_PID :13;
+ u32 EMM_trans : 1;
+ u32 EMM_filter_4 : 1;
+ u32 EMM_filter_6 : 1;
+ u32 ECM_PID :13;
+ u32 ECM_trans : 1;
+ u32 reserved : 2;
+ } pid_filter_308;
+
+ struct {
+ u32 Group_PID :13;
+ u32 Group_trans : 1;
+ u32 unused1 : 2;
+ u32 Group_mask :13;
+ u32 unused2 : 3;
+ } pid_filter_30c_ext_ind_0_7;
+
+ struct {
+ u32 net_master_read :17;
+ u32 unused :15;
+ } pid_filter_30c_ext_ind_1;
+
+ struct {
+ u32 net_master_write :17;
+ u32 unused :15;
+ } pid_filter_30c_ext_ind_2;
+
+ struct {
+ u32 next_net_master_write :17;
+ u32 unused :15;
+ } pid_filter_30c_ext_ind_3;
+
+ struct {
+ u32 unused1 : 1;
+ u32 state_write :10;
+ u32 reserved1 : 6;
+ u32 stack_read :10;
+ u32 reserved2 : 5;
+ } pid_filter_30c_ext_ind_4;
+
+ struct {
+ u32 stack_cnt :10;
+ u32 unused :22;
+ } pid_filter_30c_ext_ind_5;
+
+ struct {
+ u32 pid_fsm_save_reg0 : 2;
+ u32 pid_fsm_save_reg1 : 2;
+ u32 pid_fsm_save_reg2 : 2;
+ u32 pid_fsm_save_reg3 : 2;
+ u32 pid_fsm_save_reg4 : 2;
+ u32 pid_fsm_save_reg300 : 2;
+ u32 write_status1 : 2;
+ u32 write_status4 : 2;
+ u32 data_size_reg :12;
+ u32 unused : 4;
+ } pid_filter_30c_ext_ind_6;
+
+ struct {
+ u32 index_reg : 5;
+ u32 extra_index_reg : 3;
+ u32 AB_select : 1;
+ u32 pass_alltables : 1;
+ u32 unused :22;
+ } index_reg_310;
+
+ struct {
+ u32 PID :13;
+ u32 PID_trans : 1;
+ u32 PID_enable_bit : 1;
+ u32 reserved :17;
+ } pid_n_reg_314;
+
+ struct {
+ u32 A4_byte : 8;
+ u32 A5_byte : 8;
+ u32 A6_byte : 8;
+ u32 Enable_bit : 1;
+ u32 HighAB_bit : 1;
+ u32 reserved : 6;
+ } mac_low_reg_318;
+
+ struct {
+ u32 A1_byte : 8;
+ u32 A2_byte : 8;
+ u32 A3_byte : 8;
+ u32 reserved : 8;
+ } mac_high_reg_31c;
+
+ struct {
+ u32 reserved :16;
+ u32 data_Tag_ID :16;
+ } data_tag_400;
+
+ struct {
+ u32 Card_IDbyte6 : 8;
+ u32 Card_IDbyte5 : 8;
+ u32 Card_IDbyte4 : 8;
+ u32 Card_IDbyte3 : 8;
+ } card_id_408;
+
+ struct {
+ u32 Card_IDbyte2 : 8;
+ u32 Card_IDbyte1 : 8;
+ } card_id_40c;
+
+ struct {
+ u32 MAC1 : 8;
+ u32 MAC2 : 8;
+ u32 MAC3 : 8;
+ u32 MAC6 : 8;
+ } mac_address_418;
+
+ struct {
+ u32 MAC7 : 8;
+ u32 MAC8 : 8;
+ u32 reserved :16;
+ } mac_address_41c;
+
+ struct {
+ u32 transmitter_data_byte : 8;
+ u32 ReceiveDataReady : 1;
+ u32 ReceiveByteFrameError : 1;
+ u32 txbuffempty : 1;
+ u32 reserved :21;
+ } ci_600;
+
+ struct {
+ u32 pi_d : 8;
+ u32 pi_ha :20;
+ u32 pi_rw : 1;
+ u32 pi_component_reg : 3;
+ } pi_604;
+
+ struct {
+ u32 serialReset : 1;
+ u32 oncecycle_read : 1;
+ u32 Timer_Read_req : 1;
+ u32 Timer_Load_req : 1;
+ u32 timer_data : 7;
+ u32 unused : 1;
+ u32 Timer_addr : 5;
+ u32 reserved : 3;
+ u32 pcmcia_a_mod_pwr_n : 1;
+ u32 pcmcia_b_mod_pwr_n : 1;
+ u32 config_Done_stat : 1;
+ u32 config_Init_stat : 1;
+ u32 config_Prog_n : 1;
+ u32 config_wr_n : 1;
+ u32 config_cs_n : 1;
+ u32 config_cclk : 1;
+ u32 pi_CiMax_IRQ_n : 1;
+ u32 pi_timeout_status : 1;
+ u32 pi_wait_n : 1;
+ u32 pi_busy_n : 1;
+ } pi_608;
+
+ struct {
+ u32 PID :13;
+ u32 key_enable : 1;
+ u32 key_code : 2;
+ u32 key_array_col : 3;
+ u32 key_array_row : 5;
+ u32 dvb_en : 1;
+ u32 rw_flag : 1;
+ u32 reserved : 6;
+ } dvb_reg_60c;
+
+ struct {
+ u32 sram_addr :15;
+ u32 sram_rw : 1;
+ u32 sram_data : 8;
+ u32 sc_xfer_bit : 1;
+ u32 reserved1 : 3;
+ u32 oe_pin_reg : 1;
+ u32 ce_pin_reg : 1;
+ u32 reserved2 : 1;
+ u32 start_sram_ibi : 1;
+ } sram_ctrl_reg_700;
+
+ struct {
+ u32 net_addr_read :16;
+ u32 net_addr_write :16;
+ } net_buf_reg_704;
+
+ struct {
+ u32 cai_read :11;
+ u32 reserved1 : 5;
+ u32 cai_write :11;
+ u32 reserved2 : 6;
+ u32 cai_cnt : 4;
+ } cai_buf_reg_708;
+
+ struct {
+ u32 cao_read :11;
+ u32 reserved1 : 5;
+ u32 cap_write :11;
+ u32 reserved2 : 6;
+ u32 cao_cnt : 4;
+ } cao_buf_reg_70c;
+
+ struct {
+ u32 media_read :11;
+ u32 reserved1 : 5;
+ u32 media_write :11;
+ u32 reserved2 : 6;
+ u32 media_cnt : 4;
+ } media_buf_reg_710;
+
+ struct {
+ u32 NET_Dest : 2;
+ u32 CAI_Dest : 2;
+ u32 CAO_Dest : 2;
+ u32 MEDIA_Dest : 2;
+ u32 net_ovflow_error : 1;
+ u32 media_ovflow_error : 1;
+ u32 cai_ovflow_error : 1;
+ u32 cao_ovflow_error : 1;
+ u32 ctrl_usb_wan : 1;
+ u32 ctrl_sramdma : 1;
+ u32 ctrl_maximumfill : 1;
+ u32 reserved :17;
+ } sram_dest_reg_714;
+
+ struct {
+ u32 net_cnt :12;
+ u32 reserved1 : 4;
+ u32 net_addr_read : 1;
+ u32 reserved2 : 3;
+ u32 net_addr_write : 1;
+ u32 reserved3 :11;
+ } net_buf_reg_718;
+
+ struct {
+ u32 wan_speed_sig : 2;
+ u32 reserved1 : 6;
+ u32 wan_wait_state : 8;
+ u32 sram_chip : 2;
+ u32 sram_memmap : 2;
+ u32 reserved2 : 4;
+ u32 wan_pkt_frame : 4;
+ u32 reserved3 : 4;
+ } wan_ctrl_reg_71c;
+} flexcop_ibi_value;
+
+#endif
diff --git a/drivers/media/pci/bt8xx/Kconfig b/drivers/media/pci/bt8xx/Kconfig
new file mode 100644
index 000000000000..8668e634c7ec
--- /dev/null
+++ b/drivers/media/pci/bt8xx/Kconfig
@@ -0,0 +1,22 @@
+config DVB_BT8XX
+ tristate "BT8xx based PCI cards"
+ depends on DVB_CORE && PCI && I2C && VIDEO_BT848
+ select DVB_MT352 if !DVB_FE_CUSTOMISE
+ select DVB_SP887X if !DVB_FE_CUSTOMISE
+ select DVB_NXT6000 if !DVB_FE_CUSTOMISE
+ select DVB_CX24110 if !DVB_FE_CUSTOMISE
+ select DVB_OR51211 if !DVB_FE_CUSTOMISE
+ select DVB_LGDT330X if !DVB_FE_CUSTOMISE
+ select DVB_ZL10353 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
+ help
+ Support for PCI cards based on the Bt8xx PCI bridge. Examples are
+ the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards,
+ the pcHDTV HD2000 cards, the DViCO FusionHDTV Lite cards, and
+ some AVerMedia cards.
+
+ Since these cards have no MPEG decoder onboard, they transmit
+ only compressed MPEG data over the PCI bus, so you need
+ an external software decoder to watch TV on your computer.
+
+ Say Y if you own such a device and want to use it.
diff --git a/drivers/media/pci/bt8xx/Makefile b/drivers/media/pci/bt8xx/Makefile
new file mode 100644
index 000000000000..36591ae505f4
--- /dev/null
+++ b/drivers/media/pci/bt8xx/Makefile
@@ -0,0 +1,6 @@
+obj-$(CONFIG_DVB_BT8XX) += bt878.o dvb-bt8xx.o dst.o dst_ca.o
+
+ccflags-y += -Idrivers/media/dvb-core
+ccflags-y += -Idrivers/media/dvb-frontends
+ccflags-y += -Idrivers/media/video/bt8xx
+ccflags-y += -Idrivers/media/common/tuners
diff --git a/drivers/media/pci/bt8xx/bt878.c b/drivers/media/pci/bt8xx/bt878.c
new file mode 100644
index 000000000000..b34fa95185e4
--- /dev/null
+++ b/drivers/media/pci/bt8xx/bt878.c
@@ -0,0 +1,609 @@
+/*
+ * bt878.c: part of the driver for the Pinnacle PCTV Sat DVB PCI card
+ *
+ * Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@htp-tel.de>
+ *
+ * large parts based on the bttv driver
+ * Copyright (C) 1996,97,98 Ralph Metzler (rjkm@metzlerbros.de)
+ * & Marcus Metzler (mocm@metzlerbros.de)
+ * (c) 1999,2000 Gerd Knorr <kraxel@goldbach.in-berlin.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+#include <linux/ioport.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/kmod.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "bt878.h"
+#include "dst_priv.h"
+
+
+/**************************************/
+/* Miscellaneous utility definitions */
+/**************************************/
+
+static unsigned int bt878_verbose = 1;
+static unsigned int bt878_debug;
+
+module_param_named(verbose, bt878_verbose, int, 0444);
+MODULE_PARM_DESC(verbose,
+ "verbose startup messages, default is 1 (yes)");
+module_param_named(debug, bt878_debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off debugging, default is 0 (off).");
+
+int bt878_num;
+struct bt878 bt878[BT878_MAX];
+
+EXPORT_SYMBOL(bt878_num);
+EXPORT_SYMBOL(bt878);
+
+#define btwrite(dat,adr) bmtwrite((dat), (bt->bt878_mem+(adr)))
+#define btread(adr) bmtread(bt->bt878_mem+(adr))
+
+#define btand(dat,adr) btwrite((dat) & btread(adr), adr)
+#define btor(dat,adr) btwrite((dat) | btread(adr), adr)
+#define btaor(dat,mask,adr) btwrite((dat) | ((mask) & btread(adr)), adr)
+
+#if defined(dprintk)
+#undef dprintk
+#endif
+#define dprintk(fmt, arg...) \
+ do { \
+ if (bt878_debug) \
+ printk(KERN_DEBUG fmt, ##arg); \
+ } while (0)
+
+static void bt878_mem_free(struct bt878 *bt)
+{
+ if (bt->buf_cpu) {
+ pci_free_consistent(bt->dev, bt->buf_size, bt->buf_cpu,
+ bt->buf_dma);
+ bt->buf_cpu = NULL;
+ }
+
+ if (bt->risc_cpu) {
+ pci_free_consistent(bt->dev, bt->risc_size, bt->risc_cpu,
+ bt->risc_dma);
+ bt->risc_cpu = NULL;
+ }
+}
+
+static int bt878_mem_alloc(struct bt878 *bt)
+{
+ if (!bt->buf_cpu) {
+ bt->buf_size = 128 * 1024;
+
+ bt->buf_cpu =
+ pci_alloc_consistent(bt->dev, bt->buf_size,
+ &bt->buf_dma);
+
+ if (!bt->buf_cpu)
+ return -ENOMEM;
+
+ memset(bt->buf_cpu, 0, bt->buf_size);
+ }
+
+ if (!bt->risc_cpu) {
+ bt->risc_size = PAGE_SIZE;
+ bt->risc_cpu =
+ pci_alloc_consistent(bt->dev, bt->risc_size,
+ &bt->risc_dma);
+
+ if (!bt->risc_cpu) {
+ bt878_mem_free(bt);
+ return -ENOMEM;
+ }
+
+ memset(bt->risc_cpu, 0, bt->risc_size);
+ }
+
+ return 0;
+}
+
+/* RISC instructions */
+#define RISC_WRITE (0x01 << 28)
+#define RISC_JUMP (0x07 << 28)
+#define RISC_SYNC (0x08 << 28)
+
+/* RISC bits */
+#define RISC_WR_SOL (1 << 27)
+#define RISC_WR_EOL (1 << 26)
+#define RISC_IRQ (1 << 24)
+#define RISC_STATUS(status) ((((~status) & 0x0F) << 20) | ((status & 0x0F) << 16))
+#define RISC_SYNC_RESYNC (1 << 15)
+#define RISC_SYNC_FM1 0x06
+#define RISC_SYNC_VRO 0x0C
+
+#define RISC_FLUSH() bt->risc_pos = 0
+#define RISC_INSTR(instr) bt->risc_cpu[bt->risc_pos++] = cpu_to_le32(instr)
+
+static int bt878_make_risc(struct bt878 *bt)
+{
+ bt->block_bytes = bt->buf_size >> 4;
+ bt->block_count = 1 << 4;
+ bt->line_bytes = bt->block_bytes;
+ bt->line_count = bt->block_count;
+
+ while (bt->line_bytes > 4095) {
+ bt->line_bytes >>= 1;
+ bt->line_count <<= 1;
+ }
+
+ if (bt->line_count > 255) {
+ printk(KERN_ERR "bt878: buffer size error!\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+
+static void bt878_risc_program(struct bt878 *bt, u32 op_sync_orin)
+{
+ u32 buf_pos = 0;
+ u32 line;
+
+ RISC_FLUSH();
+ RISC_INSTR(RISC_SYNC | RISC_SYNC_FM1 | op_sync_orin);
+ RISC_INSTR(0);
+
+ dprintk("bt878: risc len lines %u, bytes per line %u\n",
+ bt->line_count, bt->line_bytes);
+ for (line = 0; line < bt->line_count; line++) {
+ // At the beginning of every block we issue an IRQ with previous (finished) block number set
+ if (!(buf_pos % bt->block_bytes))
+ RISC_INSTR(RISC_WRITE | RISC_WR_SOL | RISC_WR_EOL |
+ RISC_IRQ |
+ RISC_STATUS(((buf_pos /
+ bt->block_bytes) +
+ (bt->block_count -
+ 1)) %
+ bt->block_count) | bt->
+ line_bytes);
+ else
+ RISC_INSTR(RISC_WRITE | RISC_WR_SOL | RISC_WR_EOL |
+ bt->line_bytes);
+ RISC_INSTR(bt->buf_dma + buf_pos);
+ buf_pos += bt->line_bytes;
+ }
+
+ RISC_INSTR(RISC_SYNC | op_sync_orin | RISC_SYNC_VRO);
+ RISC_INSTR(0);
+
+ RISC_INSTR(RISC_JUMP);
+ RISC_INSTR(bt->risc_dma);
+
+ btwrite((bt->line_count << 16) | bt->line_bytes, BT878_APACK_LEN);
+}
+
+/*****************************/
+/* Start/Stop grabbing funcs */
+/*****************************/
+
+void bt878_start(struct bt878 *bt, u32 controlreg, u32 op_sync_orin,
+ u32 irq_err_ignore)
+{
+ u32 int_mask;
+
+ dprintk("bt878 debug: bt878_start (ctl=%8.8x)\n", controlreg);
+ /* complete the writing of the risc dma program now we have
+ * the card specifics
+ */
+ bt878_risc_program(bt, op_sync_orin);
+ controlreg &= ~0x1f;
+ controlreg |= 0x1b;
+
+ btwrite(bt->risc_dma, BT878_ARISC_START);
+
+ /* original int mask had :
+ * 6 2 8 4 0
+ * 1111 1111 1000 0000 0000
+ * SCERR|OCERR|PABORT|RIPERR|FDSR|FTRGT|FBUS|RISCI
+ * Hacked for DST to:
+ * SCERR | OCERR | FDSR | FTRGT | FBUS | RISCI
+ */
+ int_mask = BT878_ASCERR | BT878_AOCERR | BT878_APABORT |
+ BT878_ARIPERR | BT878_APPERR | BT878_AFDSR | BT878_AFTRGT |
+ BT878_AFBUS | BT878_ARISCI;
+
+
+ /* ignore pesky bits */
+ int_mask &= ~irq_err_ignore;
+
+ btwrite(int_mask, BT878_AINT_MASK);
+ btwrite(controlreg, BT878_AGPIO_DMA_CTL);
+}
+
+void bt878_stop(struct bt878 *bt)
+{
+ u32 stat;
+ int i = 0;
+
+ dprintk("bt878 debug: bt878_stop\n");
+
+ btwrite(0, BT878_AINT_MASK);
+ btand(~0x13, BT878_AGPIO_DMA_CTL);
+
+ do {
+ stat = btread(BT878_AINT_STAT);
+ if (!(stat & BT878_ARISC_EN))
+ break;
+ i++;
+ } while (i < 500);
+
+ dprintk("bt878(%d) debug: bt878_stop, i=%d, stat=0x%8.8x\n",
+ bt->nr, i, stat);
+}
+
+EXPORT_SYMBOL(bt878_start);
+EXPORT_SYMBOL(bt878_stop);
+
+/*****************************/
+/* Interrupt service routine */
+/*****************************/
+
+static irqreturn_t bt878_irq(int irq, void *dev_id)
+{
+ u32 stat, astat, mask;
+ int count;
+ struct bt878 *bt;
+
+ bt = (struct bt878 *) dev_id;
+
+ count = 0;
+ while (1) {
+ stat = btread(BT878_AINT_STAT);
+ mask = btread(BT878_AINT_MASK);
+ if (!(astat = (stat & mask)))
+ return IRQ_NONE; /* this interrupt is not for me */
+/* dprintk("bt878(%d) debug: irq count %d, stat 0x%8.8x, mask 0x%8.8x\n",bt->nr,count,stat,mask); */
+ btwrite(astat, BT878_AINT_STAT); /* try to clear interrupt condition */
+
+
+ if (astat & (BT878_ASCERR | BT878_AOCERR)) {
+ if (bt878_verbose) {
+ printk(KERN_INFO
+ "bt878(%d): irq%s%s risc_pc=%08x\n",
+ bt->nr,
+ (astat & BT878_ASCERR) ? " SCERR" :
+ "",
+ (astat & BT878_AOCERR) ? " OCERR" :
+ "", btread(BT878_ARISC_PC));
+ }
+ }
+ if (astat & (BT878_APABORT | BT878_ARIPERR | BT878_APPERR)) {
+ if (bt878_verbose) {
+ printk(KERN_INFO
+ "bt878(%d): irq%s%s%s risc_pc=%08x\n",
+ bt->nr,
+ (astat & BT878_APABORT) ? " PABORT" :
+ "",
+ (astat & BT878_ARIPERR) ? " RIPERR" :
+ "",
+ (astat & BT878_APPERR) ? " PPERR" :
+ "", btread(BT878_ARISC_PC));
+ }
+ }
+ if (astat & (BT878_AFDSR | BT878_AFTRGT | BT878_AFBUS)) {
+ if (bt878_verbose) {
+ printk(KERN_INFO
+ "bt878(%d): irq%s%s%s risc_pc=%08x\n",
+ bt->nr,
+ (astat & BT878_AFDSR) ? " FDSR" : "",
+ (astat & BT878_AFTRGT) ? " FTRGT" :
+ "",
+ (astat & BT878_AFBUS) ? " FBUS" : "",
+ btread(BT878_ARISC_PC));
+ }
+ }
+ if (astat & BT878_ARISCI) {
+ bt->finished_block = (stat & BT878_ARISCS) >> 28;
+ tasklet_schedule(&bt->tasklet);
+ break;
+ }
+ count++;
+ if (count > 20) {
+ btwrite(0, BT878_AINT_MASK);
+ printk(KERN_ERR
+ "bt878(%d): IRQ lockup, cleared int mask\n",
+ bt->nr);
+ break;
+ }
+ }
+ return IRQ_HANDLED;
+}
+
+int
+bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet *mp)
+{
+ int retval;
+
+ retval = 0;
+ if (mutex_lock_interruptible(&bt->gpio_lock))
+ return -ERESTARTSYS;
+ /* special gpio signal */
+ switch (cmd) {
+ case DST_IG_ENABLE:
+ // dprintk("dvb_bt8xx: dst enable mask 0x%02x enb 0x%02x \n", mp->dstg.enb.mask, mp->dstg.enb.enable);
+ retval = bttv_gpio_enable(bt->bttv_nr,
+ mp->enb.mask,
+ mp->enb.enable);
+ break;
+ case DST_IG_WRITE:
+ // dprintk("dvb_bt8xx: dst write gpio mask 0x%02x out 0x%02x\n", mp->dstg.outp.mask, mp->dstg.outp.highvals);
+ retval = bttv_write_gpio(bt->bttv_nr,
+ mp->outp.mask,
+ mp->outp.highvals);
+
+ break;
+ case DST_IG_READ:
+ /* read */
+ retval = bttv_read_gpio(bt->bttv_nr, &mp->rd.value);
+ // dprintk("dvb_bt8xx: dst read gpio 0x%02x\n", (unsigned)mp->dstg.rd.value);
+ break;
+ case DST_IG_TS:
+ /* Set packet size */
+ bt->TS_Size = mp->psize;
+ break;
+
+ default:
+ retval = -EINVAL;
+ break;
+ }
+ mutex_unlock(&bt->gpio_lock);
+ return retval;
+}
+
+EXPORT_SYMBOL(bt878_device_control);
+
+#define BROOKTREE_878_DEVICE(vend, dev, name) \
+ { \
+ .vendor = PCI_VENDOR_ID_BROOKTREE, \
+ .device = PCI_DEVICE_ID_BROOKTREE_878, \
+ .subvendor = (vend), .subdevice = (dev), \
+ .driver_data = (unsigned long) name \
+ }
+
+static struct pci_device_id bt878_pci_tbl[] __devinitdata = {
+ BROOKTREE_878_DEVICE(0x0071, 0x0101, "Nebula Electronics DigiTV"),
+ BROOKTREE_878_DEVICE(0x1461, 0x0761, "AverMedia AverTV DVB-T 761"),
+ BROOKTREE_878_DEVICE(0x11bd, 0x001c, "Pinnacle PCTV Sat"),
+ BROOKTREE_878_DEVICE(0x11bd, 0x0026, "Pinnacle PCTV SAT CI"),
+ BROOKTREE_878_DEVICE(0x1822, 0x0001, "Twinhan VisionPlus DVB"),
+ BROOKTREE_878_DEVICE(0x270f, 0xfc00,
+ "ChainTech digitop DST-1000 DVB-S"),
+ BROOKTREE_878_DEVICE(0x1461, 0x0771, "AVermedia AverTV DVB-T 771"),
+ BROOKTREE_878_DEVICE(0x18ac, 0xdb10, "DViCO FusionHDTV DVB-T Lite"),
+ BROOKTREE_878_DEVICE(0x18ac, 0xdb11, "Ultraview DVB-T Lite"),
+ BROOKTREE_878_DEVICE(0x18ac, 0xd500, "DViCO FusionHDTV 5 Lite"),
+ BROOKTREE_878_DEVICE(0x7063, 0x2000, "pcHDTV HD-2000 TV"),
+ BROOKTREE_878_DEVICE(0x1822, 0x0026, "DNTV Live! Mini"),
+ { }
+};
+
+MODULE_DEVICE_TABLE(pci, bt878_pci_tbl);
+
+static const char * __devinit card_name(const struct pci_device_id *id)
+{
+ return id->driver_data ? (const char *)id->driver_data : "Unknown";
+}
+
+/***********************/
+/* PCI device handling */
+/***********************/
+
+static int __devinit bt878_probe(struct pci_dev *dev,
+ const struct pci_device_id *pci_id)
+{
+ int result = 0;
+ unsigned char lat;
+ struct bt878 *bt;
+#if defined(__powerpc__)
+ unsigned int cmd;
+#endif
+ unsigned int cardid;
+
+ printk(KERN_INFO "bt878: Bt878 AUDIO function found (%d).\n",
+ bt878_num);
+ if (bt878_num >= BT878_MAX) {
+ printk(KERN_ERR "bt878: Too many devices inserted\n");
+ result = -ENOMEM;
+ goto fail0;
+ }
+ if (pci_enable_device(dev))
+ return -EIO;
+
+ cardid = dev->subsystem_device << 16;
+ cardid |= dev->subsystem_vendor;
+
+ printk(KERN_INFO "%s: card id=[0x%x],[ %s ] has DVB functions.\n",
+ __func__, cardid, card_name(pci_id));
+
+ bt = &bt878[bt878_num];
+ bt->dev = dev;
+ bt->nr = bt878_num;
+ bt->shutdown = 0;
+
+ bt->id = dev->device;
+ bt->irq = dev->irq;
+ bt->bt878_adr = pci_resource_start(dev, 0);
+ if (!request_mem_region(pci_resource_start(dev, 0),
+ pci_resource_len(dev, 0), "bt878")) {
+ result = -EBUSY;
+ goto fail0;
+ }
+
+ bt->revision = dev->revision;
+ pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
+
+
+ printk(KERN_INFO "bt878(%d): Bt%x (rev %d) at %02x:%02x.%x, ",
+ bt878_num, bt->id, bt->revision, dev->bus->number,
+ PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+ printk("irq: %d, latency: %d, memory: 0x%lx\n",
+ bt->irq, lat, bt->bt878_adr);
+
+
+#if defined(__powerpc__)
+ /* on OpenFirmware machines (PowerMac at least), PCI memory cycle */
+ /* response on cards with no firmware is not enabled by OF */
+ pci_read_config_dword(dev, PCI_COMMAND, &cmd);
+ cmd = (cmd | PCI_COMMAND_MEMORY);
+ pci_write_config_dword(dev, PCI_COMMAND, cmd);
+#endif
+
+#ifdef __sparc__
+ bt->bt878_mem = (unsigned char *) bt->bt878_adr;
+#else
+ bt->bt878_mem = ioremap(bt->bt878_adr, 0x1000);
+#endif
+
+ /* clear interrupt mask */
+ btwrite(0, BT848_INT_MASK);
+
+ result = request_irq(bt->irq, bt878_irq,
+ IRQF_SHARED | IRQF_DISABLED, "bt878",
+ (void *) bt);
+ if (result == -EINVAL) {
+ printk(KERN_ERR "bt878(%d): Bad irq number or handler\n",
+ bt878_num);
+ goto fail1;
+ }
+ if (result == -EBUSY) {
+ printk(KERN_ERR
+ "bt878(%d): IRQ %d busy, change your PnP config in BIOS\n",
+ bt878_num, bt->irq);
+ goto fail1;
+ }
+ if (result < 0)
+ goto fail1;
+
+ pci_set_master(dev);
+ pci_set_drvdata(dev, bt);
+
+ if ((result = bt878_mem_alloc(bt))) {
+ printk(KERN_ERR "bt878: failed to allocate memory!\n");
+ goto fail2;
+ }
+
+ bt878_make_risc(bt);
+ btwrite(0, BT878_AINT_MASK);
+ bt878_num++;
+
+ return 0;
+
+ fail2:
+ free_irq(bt->irq, bt);
+ fail1:
+ release_mem_region(pci_resource_start(bt->dev, 0),
+ pci_resource_len(bt->dev, 0));
+ fail0:
+ pci_disable_device(dev);
+ return result;
+}
+
+static void __devexit bt878_remove(struct pci_dev *pci_dev)
+{
+ u8 command;
+ struct bt878 *bt = pci_get_drvdata(pci_dev);
+
+ if (bt878_verbose)
+ printk(KERN_INFO "bt878(%d): unloading\n", bt->nr);
+
+ /* turn off all capturing, DMA and IRQs */
+ btand(~0x13, BT878_AGPIO_DMA_CTL);
+
+ /* first disable interrupts before unmapping the memory! */
+ btwrite(0, BT878_AINT_MASK);
+ btwrite(~0U, BT878_AINT_STAT);
+
+ /* disable PCI bus-mastering */
+ pci_read_config_byte(bt->dev, PCI_COMMAND, &command);
+ /* Should this be &=~ ?? */
+ command &= ~PCI_COMMAND_MASTER;
+ pci_write_config_byte(bt->dev, PCI_COMMAND, command);
+
+ free_irq(bt->irq, bt);
+ printk(KERN_DEBUG "bt878_mem: 0x%p.\n", bt->bt878_mem);
+ if (bt->bt878_mem)
+ iounmap(bt->bt878_mem);
+
+ release_mem_region(pci_resource_start(bt->dev, 0),
+ pci_resource_len(bt->dev, 0));
+ /* wake up any waiting processes
+ because shutdown flag is set, no new processes (in this queue)
+ are expected
+ */
+ bt->shutdown = 1;
+ bt878_mem_free(bt);
+
+ pci_set_drvdata(pci_dev, NULL);
+ pci_disable_device(pci_dev);
+ return;
+}
+
+static struct pci_driver bt878_pci_driver = {
+ .name = "bt878",
+ .id_table = bt878_pci_tbl,
+ .probe = bt878_probe,
+ .remove = __devexit_p(bt878_remove),
+};
+
+/*******************************/
+/* Module management functions */
+/*******************************/
+
+static int __init bt878_init_module(void)
+{
+ bt878_num = 0;
+
+ printk(KERN_INFO "bt878: AUDIO driver version %d.%d.%d loaded\n",
+ (BT878_VERSION_CODE >> 16) & 0xff,
+ (BT878_VERSION_CODE >> 8) & 0xff,
+ BT878_VERSION_CODE & 0xff);
+
+ return pci_register_driver(&bt878_pci_driver);
+}
+
+static void __exit bt878_cleanup_module(void)
+{
+ pci_unregister_driver(&bt878_pci_driver);
+}
+
+module_init(bt878_init_module);
+module_exit(bt878_cleanup_module);
+
+MODULE_LICENSE("GPL");
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/pci/bt8xx/bt878.h b/drivers/media/pci/bt8xx/bt878.h
new file mode 100644
index 000000000000..d19b59299d78
--- /dev/null
+++ b/drivers/media/pci/bt8xx/bt878.h
@@ -0,0 +1,159 @@
+/*
+ bt878.h - Bt878 audio module (register offsets)
+
+ Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@htp-tel.de>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _BT878_H_
+#define _BT878_H_
+
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+
+#include "bt848.h"
+#include "bttv.h"
+
+#define BT878_VERSION_CODE 0x000000
+
+#define BT878_AINT_STAT 0x100
+#define BT878_ARISCS (0xf<<28)
+#define BT878_ARISC_EN (1<<27)
+#define BT878_ASCERR (1<<19)
+#define BT878_AOCERR (1<<18)
+#define BT878_APABORT (1<<17)
+#define BT878_ARIPERR (1<<16)
+#define BT878_APPERR (1<<15)
+#define BT878_AFDSR (1<<14)
+#define BT878_AFTRGT (1<<13)
+#define BT878_AFBUS (1<<12)
+#define BT878_ARISCI (1<<11)
+#define BT878_AOFLOW (1<<3)
+
+#define BT878_AINT_MASK 0x104
+
+#define BT878_AGPIO_DMA_CTL 0x10c
+#define BT878_A_GAIN (0xf<<28)
+#define BT878_A_G2X (1<<27)
+#define BT878_A_PWRDN (1<<26)
+#define BT878_A_SEL (3<<24)
+#define BT878_DA_SCE (1<<23)
+#define BT878_DA_LRI (1<<22)
+#define BT878_DA_MLB (1<<21)
+#define BT878_DA_LRD (0x1f<<16)
+#define BT878_DA_DPM (1<<15)
+#define BT878_DA_SBR (1<<14)
+#define BT878_DA_ES2 (1<<13)
+#define BT878_DA_LMT (1<<12)
+#define BT878_DA_SDR (0xf<<8)
+#define BT878_DA_IOM (3<<6)
+#define BT878_DA_APP (1<<5)
+#define BT878_ACAP_EN (1<<4)
+#define BT878_PKTP (3<<2)
+#define BT878_RISC_EN (1<<1)
+#define BT878_FIFO_EN 1
+
+#define BT878_APACK_LEN 0x110
+#define BT878_AFP_LEN (0xff<<16)
+#define BT878_ALP_LEN 0xfff
+
+#define BT878_ARISC_START 0x114
+
+#define BT878_ARISC_PC 0x120
+
+/* BT878 FUNCTION 0 REGISTERS */
+#define BT878_GPIO_DMA_CTL 0x10c
+
+/* Interrupt register */
+#define BT878_INT_STAT 0x100
+#define BT878_INT_MASK 0x104
+#define BT878_I2CRACK (1<<25)
+#define BT878_I2CDONE (1<<8)
+
+#define BT878_MAX 4
+
+#define BT878_RISC_SYNC_MASK (1 << 15)
+
+
+#define BTTV_BOARD_UNKNOWN 0x00
+#define BTTV_BOARD_PINNACLESAT 0x5e
+#define BTTV_BOARD_NEBULA_DIGITV 0x68
+#define BTTV_BOARD_PC_HDTV 0x70
+#define BTTV_BOARD_TWINHAN_DST 0x71
+#define BTTV_BOARD_AVDVBT_771 0x7b
+#define BTTV_BOARD_AVDVBT_761 0x7c
+#define BTTV_BOARD_DVICO_DVBT_LITE 0x80
+#define BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE 0x87
+
+extern int bt878_num;
+
+struct bt878 {
+ struct mutex gpio_lock;
+ unsigned int nr;
+ unsigned int bttv_nr;
+ struct i2c_adapter *adapter;
+ struct pci_dev *dev;
+ unsigned int id;
+ unsigned int TS_Size;
+ unsigned char revision;
+ unsigned int irq;
+ unsigned long bt878_adr;
+ volatile void __iomem *bt878_mem; /* function 1 */
+
+ volatile u32 finished_block;
+ volatile u32 last_block;
+ u32 block_count;
+ u32 block_bytes;
+ u32 line_bytes;
+ u32 line_count;
+
+ u32 buf_size;
+ u8 *buf_cpu;
+ dma_addr_t buf_dma;
+
+ u32 risc_size;
+ __le32 *risc_cpu;
+ dma_addr_t risc_dma;
+ u32 risc_pos;
+
+ struct tasklet_struct tasklet;
+ int shutdown;
+};
+
+extern struct bt878 bt878[BT878_MAX];
+
+void bt878_start(struct bt878 *bt, u32 controlreg, u32 op_sync_orin,
+ u32 irq_err_ignore);
+void bt878_stop(struct bt878 *bt);
+
+#if defined(__powerpc__) /* big-endian */
+static inline void io_st_le32(volatile unsigned __iomem *addr, unsigned val)
+{
+ st_le32(addr, val);
+ eieio();
+}
+
+#define bmtwrite(dat,adr) io_st_le32((adr),(dat))
+#define bmtread(adr) ld_le32((adr))
+#else
+#define bmtwrite(dat,adr) writel((dat), (adr))
+#define bmtread(adr) readl(adr)
+#endif
+
+#endif
diff --git a/drivers/media/pci/bt8xx/dst.c b/drivers/media/pci/bt8xx/dst.c
new file mode 100644
index 000000000000..430b3eb11815
--- /dev/null
+++ b/drivers/media/pci/bt8xx/dst.c
@@ -0,0 +1,1873 @@
+/*
+ Frontend/Card driver for TwinHan DST Frontend
+ Copyright (C) 2003 Jamie Honan
+ Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <asm/div64.h>
+#include "dvb_frontend.h"
+#include "dst_priv.h"
+#include "dst_common.h"
+
+static unsigned int verbose = 1;
+module_param(verbose, int, 0644);
+MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)");
+
+static unsigned int dst_addons;
+module_param(dst_addons, int, 0644);
+MODULE_PARM_DESC(dst_addons, "CA daughterboard, default is 0 (No addons)");
+
+static unsigned int dst_algo;
+module_param(dst_algo, int, 0644);
+MODULE_PARM_DESC(dst_algo, "tuning algo: default is 0=(SW), 1=(HW)");
+
+#define HAS_LOCK 1
+#define ATTEMPT_TUNE 2
+#define HAS_POWER 4
+
+#define DST_ERROR 0
+#define DST_NOTICE 1
+#define DST_INFO 2
+#define DST_DEBUG 3
+
+#define dprintk(x, y, z, format, arg...) do { \
+ if (z) { \
+ if ((x > DST_ERROR) && (x > y)) \
+ printk(KERN_ERR "dst(%d) %s: " format "\n", \
+ state->bt->nr, __func__ , ##arg); \
+ else if ((x > DST_NOTICE) && (x > y)) \
+ printk(KERN_NOTICE "dst(%d) %s: " format "\n", \
+ state->bt->nr, __func__ , ##arg); \
+ else if ((x > DST_INFO) && (x > y)) \
+ printk(KERN_INFO "dst(%d) %s: " format "\n", \
+ state->bt->nr, __func__ , ##arg); \
+ else if ((x > DST_DEBUG) && (x > y)) \
+ printk(KERN_DEBUG "dst(%d) %s: " format "\n", \
+ state->bt->nr, __func__ , ##arg); \
+ } else { \
+ if (x > y) \
+ printk(format, ##arg); \
+ } \
+} while(0)
+
+static int dst_command(struct dst_state *state, u8 *data, u8 len);
+
+static void dst_packsize(struct dst_state *state, int psize)
+{
+ union dst_gpio_packet bits;
+
+ bits.psize = psize;
+ bt878_device_control(state->bt, DST_IG_TS, &bits);
+}
+
+static int dst_gpio_outb(struct dst_state *state, u32 mask, u32 enbb,
+ u32 outhigh, int delay)
+{
+ union dst_gpio_packet enb;
+ union dst_gpio_packet bits;
+ int err;
+
+ enb.enb.mask = mask;
+ enb.enb.enable = enbb;
+
+ dprintk(verbose, DST_INFO, 1, "mask=[%04x], enbb=[%04x], outhigh=[%04x]", mask, enbb, outhigh);
+ if ((err = bt878_device_control(state->bt, DST_IG_ENABLE, &enb)) < 0) {
+ dprintk(verbose, DST_INFO, 1, "dst_gpio_enb error (err == %i, mask == %02x, enb == %02x)", err, mask, enbb);
+ return -EREMOTEIO;
+ }
+ udelay(1000);
+ /* because complete disabling means no output, no need to do output packet */
+ if (enbb == 0)
+ return 0;
+ if (delay)
+ msleep(10);
+ bits.outp.mask = enbb;
+ bits.outp.highvals = outhigh;
+ if ((err = bt878_device_control(state->bt, DST_IG_WRITE, &bits)) < 0) {
+ dprintk(verbose, DST_INFO, 1, "dst_gpio_outb error (err == %i, enbb == %02x, outhigh == %02x)", err, enbb, outhigh);
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static int dst_gpio_inb(struct dst_state *state, u8 *result)
+{
+ union dst_gpio_packet rd_packet;
+ int err;
+
+ *result = 0;
+ if ((err = bt878_device_control(state->bt, DST_IG_READ, &rd_packet)) < 0) {
+ dprintk(verbose, DST_ERROR, 1, "dst_gpio_inb error (err == %i)", err);
+ return -EREMOTEIO;
+ }
+ *result = (u8) rd_packet.rd.value;
+
+ return 0;
+}
+
+int rdc_reset_state(struct dst_state *state)
+{
+ dprintk(verbose, DST_INFO, 1, "Resetting state machine");
+ if (dst_gpio_outb(state, RDC_8820_INT, RDC_8820_INT, 0, NO_DELAY) < 0) {
+ dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !");
+ return -1;
+ }
+ msleep(10);
+ if (dst_gpio_outb(state, RDC_8820_INT, RDC_8820_INT, RDC_8820_INT, NO_DELAY) < 0) {
+ dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !");
+ msleep(10);
+ return -1;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(rdc_reset_state);
+
+static int rdc_8820_reset(struct dst_state *state)
+{
+ dprintk(verbose, DST_DEBUG, 1, "Resetting DST");
+ if (dst_gpio_outb(state, RDC_8820_RESET, RDC_8820_RESET, 0, NO_DELAY) < 0) {
+ dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !");
+ return -1;
+ }
+ udelay(1000);
+ if (dst_gpio_outb(state, RDC_8820_RESET, RDC_8820_RESET, RDC_8820_RESET, DELAY) < 0) {
+ dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int dst_pio_enable(struct dst_state *state)
+{
+ if (dst_gpio_outb(state, ~0, RDC_8820_PIO_0_ENABLE, 0, NO_DELAY) < 0) {
+ dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !");
+ return -1;
+ }
+ udelay(1000);
+
+ return 0;
+}
+
+int dst_pio_disable(struct dst_state *state)
+{
+ if (dst_gpio_outb(state, ~0, RDC_8820_PIO_0_DISABLE, RDC_8820_PIO_0_DISABLE, NO_DELAY) < 0) {
+ dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !");
+ return -1;
+ }
+ if (state->type_flags & DST_TYPE_HAS_FW_1)
+ udelay(1000);
+
+ return 0;
+}
+EXPORT_SYMBOL(dst_pio_disable);
+
+int dst_wait_dst_ready(struct dst_state *state, u8 delay_mode)
+{
+ u8 reply;
+ int i;
+
+ for (i = 0; i < 200; i++) {
+ if (dst_gpio_inb(state, &reply) < 0) {
+ dprintk(verbose, DST_ERROR, 1, "dst_gpio_inb ERROR !");
+ return -1;
+ }
+ if ((reply & RDC_8820_PIO_0_ENABLE) == 0) {
+ dprintk(verbose, DST_INFO, 1, "dst wait ready after %d", i);
+ return 1;
+ }
+ msleep(10);
+ }
+ dprintk(verbose, DST_NOTICE, 1, "dst wait NOT ready after %d", i);
+
+ return 0;
+}
+EXPORT_SYMBOL(dst_wait_dst_ready);
+
+int dst_error_recovery(struct dst_state *state)
+{
+ dprintk(verbose, DST_NOTICE, 1, "Trying to return from previous errors.");
+ dst_pio_disable(state);
+ msleep(10);
+ dst_pio_enable(state);
+ msleep(10);
+
+ return 0;
+}
+EXPORT_SYMBOL(dst_error_recovery);
+
+int dst_error_bailout(struct dst_state *state)
+{
+ dprintk(verbose, DST_INFO, 1, "Trying to bailout from previous error.");
+ rdc_8820_reset(state);
+ dst_pio_disable(state);
+ msleep(10);
+
+ return 0;
+}
+EXPORT_SYMBOL(dst_error_bailout);
+
+int dst_comm_init(struct dst_state *state)
+{
+ dprintk(verbose, DST_INFO, 1, "Initializing DST.");
+ if ((dst_pio_enable(state)) < 0) {
+ dprintk(verbose, DST_ERROR, 1, "PIO Enable Failed");
+ return -1;
+ }
+ if ((rdc_reset_state(state)) < 0) {
+ dprintk(verbose, DST_ERROR, 1, "RDC 8820 State RESET Failed.");
+ return -1;
+ }
+ if (state->type_flags & DST_TYPE_HAS_FW_1)
+ msleep(100);
+ else
+ msleep(5);
+
+ return 0;
+}
+EXPORT_SYMBOL(dst_comm_init);
+
+int write_dst(struct dst_state *state, u8 *data, u8 len)
+{
+ struct i2c_msg msg = {
+ .addr = state->config->demod_address,
+ .flags = 0,
+ .buf = data,
+ .len = len
+ };
+
+ int err;
+ u8 cnt, i;
+
+ dprintk(verbose, DST_NOTICE, 0, "writing [ ");
+ for (i = 0; i < len; i++)
+ dprintk(verbose, DST_NOTICE, 0, "%02x ", data[i]);
+ dprintk(verbose, DST_NOTICE, 0, "]\n");
+
+ for (cnt = 0; cnt < 2; cnt++) {
+ if ((err = i2c_transfer(state->i2c, &msg, 1)) < 0) {
+ dprintk(verbose, DST_INFO, 1, "_write_dst error (err == %i, len == 0x%02x, b0 == 0x%02x)", err, len, data[0]);
+ dst_error_recovery(state);
+ continue;
+ } else
+ break;
+ }
+ if (cnt >= 2) {
+ dprintk(verbose, DST_INFO, 1, "RDC 8820 RESET");
+ dst_error_bailout(state);
+
+ return -1;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(write_dst);
+
+int read_dst(struct dst_state *state, u8 *ret, u8 len)
+{
+ struct i2c_msg msg = {
+ .addr = state->config->demod_address,
+ .flags = I2C_M_RD,
+ .buf = ret,
+ .len = len
+ };
+
+ int err;
+ int cnt;
+
+ for (cnt = 0; cnt < 2; cnt++) {
+ if ((err = i2c_transfer(state->i2c, &msg, 1)) < 0) {
+ dprintk(verbose, DST_INFO, 1, "read_dst error (err == %i, len == 0x%02x, b0 == 0x%02x)", err, len, ret[0]);
+ dst_error_recovery(state);
+ continue;
+ } else
+ break;
+ }
+ if (cnt >= 2) {
+ dprintk(verbose, DST_INFO, 1, "RDC 8820 RESET");
+ dst_error_bailout(state);
+
+ return -1;
+ }
+ dprintk(verbose, DST_DEBUG, 1, "reply is 0x%x", ret[0]);
+ for (err = 1; err < len; err++)
+ dprintk(verbose, DST_DEBUG, 0, " 0x%x", ret[err]);
+ if (err > 1)
+ dprintk(verbose, DST_DEBUG, 0, "\n");
+
+ return 0;
+}
+EXPORT_SYMBOL(read_dst);
+
+static int dst_set_polarization(struct dst_state *state)
+{
+ switch (state->voltage) {
+ case SEC_VOLTAGE_13: /* Vertical */
+ dprintk(verbose, DST_INFO, 1, "Polarization=[Vertical]");
+ state->tx_tuna[8] &= ~0x40;
+ break;
+ case SEC_VOLTAGE_18: /* Horizontal */
+ dprintk(verbose, DST_INFO, 1, "Polarization=[Horizontal]");
+ state->tx_tuna[8] |= 0x40;
+ break;
+ case SEC_VOLTAGE_OFF:
+ break;
+ }
+
+ return 0;
+}
+
+static int dst_set_freq(struct dst_state *state, u32 freq)
+{
+ state->frequency = freq;
+ dprintk(verbose, DST_INFO, 1, "set Frequency %u", freq);
+
+ if (state->dst_type == DST_TYPE_IS_SAT) {
+ freq = freq / 1000;
+ if (freq < 950 || freq > 2150)
+ return -EINVAL;
+ state->tx_tuna[2] = (freq >> 8);
+ state->tx_tuna[3] = (u8) freq;
+ state->tx_tuna[4] = 0x01;
+ state->tx_tuna[8] &= ~0x04;
+ if (state->type_flags & DST_TYPE_HAS_OBS_REGS) {
+ if (freq < 1531)
+ state->tx_tuna[8] |= 0x04;
+ }
+ } else if (state->dst_type == DST_TYPE_IS_TERR) {
+ freq = freq / 1000;
+ if (freq < 137000 || freq > 858000)
+ return -EINVAL;
+ state->tx_tuna[2] = (freq >> 16) & 0xff;
+ state->tx_tuna[3] = (freq >> 8) & 0xff;
+ state->tx_tuna[4] = (u8) freq;
+ } else if (state->dst_type == DST_TYPE_IS_CABLE) {
+ freq = freq / 1000;
+ state->tx_tuna[2] = (freq >> 16) & 0xff;
+ state->tx_tuna[3] = (freq >> 8) & 0xff;
+ state->tx_tuna[4] = (u8) freq;
+ } else if (state->dst_type == DST_TYPE_IS_ATSC) {
+ freq = freq / 1000;
+ if (freq < 51000 || freq > 858000)
+ return -EINVAL;
+ state->tx_tuna[2] = (freq >> 16) & 0xff;
+ state->tx_tuna[3] = (freq >> 8) & 0xff;
+ state->tx_tuna[4] = (u8) freq;
+ state->tx_tuna[5] = 0x00; /* ATSC */
+ state->tx_tuna[6] = 0x00;
+ if (state->dst_hw_cap & DST_TYPE_HAS_ANALOG)
+ state->tx_tuna[7] = 0x00; /* Digital */
+ } else
+ return -EINVAL;
+
+ return 0;
+}
+
+static int dst_set_bandwidth(struct dst_state *state, u32 bandwidth)
+{
+ state->bandwidth = bandwidth;
+
+ if (state->dst_type != DST_TYPE_IS_TERR)
+ return -EOPNOTSUPP;
+
+ switch (bandwidth) {
+ case 6000000:
+ if (state->dst_hw_cap & DST_TYPE_HAS_CA)
+ state->tx_tuna[7] = 0x06;
+ else {
+ state->tx_tuna[6] = 0x06;
+ state->tx_tuna[7] = 0x00;
+ }
+ break;
+ case 7000000:
+ if (state->dst_hw_cap & DST_TYPE_HAS_CA)
+ state->tx_tuna[7] = 0x07;
+ else {
+ state->tx_tuna[6] = 0x07;
+ state->tx_tuna[7] = 0x00;
+ }
+ break;
+ case 8000000:
+ if (state->dst_hw_cap & DST_TYPE_HAS_CA)
+ state->tx_tuna[7] = 0x08;
+ else {
+ state->tx_tuna[6] = 0x08;
+ state->tx_tuna[7] = 0x00;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int dst_set_inversion(struct dst_state *state, fe_spectral_inversion_t inversion)
+{
+ state->inversion = inversion;
+ switch (inversion) {
+ case INVERSION_OFF: /* Inversion = Normal */
+ state->tx_tuna[8] &= ~0x80;
+ break;
+ case INVERSION_ON:
+ state->tx_tuna[8] |= 0x80;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int dst_set_fec(struct dst_state *state, fe_code_rate_t fec)
+{
+ state->fec = fec;
+ return 0;
+}
+
+static fe_code_rate_t dst_get_fec(struct dst_state *state)
+{
+ return state->fec;
+}
+
+static int dst_set_symbolrate(struct dst_state *state, u32 srate)
+{
+ u32 symcalc;
+ u64 sval;
+
+ state->symbol_rate = srate;
+ if (state->dst_type == DST_TYPE_IS_TERR) {
+ return -EOPNOTSUPP;
+ }
+ dprintk(verbose, DST_INFO, 1, "set symrate %u", srate);
+ srate /= 1000;
+ if (state->dst_type == DST_TYPE_IS_SAT) {
+ if (state->type_flags & DST_TYPE_HAS_SYMDIV) {
+ sval = srate;
+ sval <<= 20;
+ do_div(sval, 88000);
+ symcalc = (u32) sval;
+ dprintk(verbose, DST_INFO, 1, "set symcalc %u", symcalc);
+ state->tx_tuna[5] = (u8) (symcalc >> 12);
+ state->tx_tuna[6] = (u8) (symcalc >> 4);
+ state->tx_tuna[7] = (u8) (symcalc << 4);
+ } else {
+ state->tx_tuna[5] = (u8) (srate >> 16) & 0x7f;
+ state->tx_tuna[6] = (u8) (srate >> 8);
+ state->tx_tuna[7] = (u8) srate;
+ }
+ state->tx_tuna[8] &= ~0x20;
+ if (state->type_flags & DST_TYPE_HAS_OBS_REGS) {
+ if (srate > 8000)
+ state->tx_tuna[8] |= 0x20;
+ }
+ } else if (state->dst_type == DST_TYPE_IS_CABLE) {
+ dprintk(verbose, DST_DEBUG, 1, "%s", state->fw_name);
+ if (!strncmp(state->fw_name, "DCTNEW", 6)) {
+ state->tx_tuna[5] = (u8) (srate >> 8);
+ state->tx_tuna[6] = (u8) srate;
+ state->tx_tuna[7] = 0x00;
+ } else if (!strncmp(state->fw_name, "DCT-CI", 6)) {
+ state->tx_tuna[5] = 0x00;
+ state->tx_tuna[6] = (u8) (srate >> 8);
+ state->tx_tuna[7] = (u8) srate;
+ }
+ }
+ return 0;
+}
+
+static int dst_set_modulation(struct dst_state *state, fe_modulation_t modulation)
+{
+ if (state->dst_type != DST_TYPE_IS_CABLE)
+ return -EOPNOTSUPP;
+
+ state->modulation = modulation;
+ switch (modulation) {
+ case QAM_16:
+ state->tx_tuna[8] = 0x10;
+ break;
+ case QAM_32:
+ state->tx_tuna[8] = 0x20;
+ break;
+ case QAM_64:
+ state->tx_tuna[8] = 0x40;
+ break;
+ case QAM_128:
+ state->tx_tuna[8] = 0x80;
+ break;
+ case QAM_256:
+ if (!strncmp(state->fw_name, "DCTNEW", 6))
+ state->tx_tuna[8] = 0xff;
+ else if (!strncmp(state->fw_name, "DCT-CI", 6))
+ state->tx_tuna[8] = 0x00;
+ break;
+ case QPSK:
+ case QAM_AUTO:
+ case VSB_8:
+ case VSB_16:
+ default:
+ return -EINVAL;
+
+ }
+
+ return 0;
+}
+
+static fe_modulation_t dst_get_modulation(struct dst_state *state)
+{
+ return state->modulation;
+}
+
+
+u8 dst_check_sum(u8 *buf, u32 len)
+{
+ u32 i;
+ u8 val = 0;
+ if (!len)
+ return 0;
+ for (i = 0; i < len; i++) {
+ val += buf[i];
+ }
+ return ((~val) + 1);
+}
+EXPORT_SYMBOL(dst_check_sum);
+
+static void dst_type_flags_print(struct dst_state *state)
+{
+ u32 type_flags = state->type_flags;
+
+ dprintk(verbose, DST_ERROR, 0, "DST type flags :");
+ if (type_flags & DST_TYPE_HAS_TS188)
+ dprintk(verbose, DST_ERROR, 0, " 0x%x newtuner", DST_TYPE_HAS_TS188);
+ if (type_flags & DST_TYPE_HAS_NEWTUNE_2)
+ dprintk(verbose, DST_ERROR, 0, " 0x%x newtuner 2", DST_TYPE_HAS_NEWTUNE_2);
+ if (type_flags & DST_TYPE_HAS_TS204)
+ dprintk(verbose, DST_ERROR, 0, " 0x%x ts204", DST_TYPE_HAS_TS204);
+ if (type_flags & DST_TYPE_HAS_VLF)
+ dprintk(verbose, DST_ERROR, 0, " 0x%x VLF", DST_TYPE_HAS_VLF);
+ if (type_flags & DST_TYPE_HAS_SYMDIV)
+ dprintk(verbose, DST_ERROR, 0, " 0x%x symdiv", DST_TYPE_HAS_SYMDIV);
+ if (type_flags & DST_TYPE_HAS_FW_1)
+ dprintk(verbose, DST_ERROR, 0, " 0x%x firmware version = 1", DST_TYPE_HAS_FW_1);
+ if (type_flags & DST_TYPE_HAS_FW_2)
+ dprintk(verbose, DST_ERROR, 0, " 0x%x firmware version = 2", DST_TYPE_HAS_FW_2);
+ if (type_flags & DST_TYPE_HAS_FW_3)
+ dprintk(verbose, DST_ERROR, 0, " 0x%x firmware version = 3", DST_TYPE_HAS_FW_3);
+ dprintk(verbose, DST_ERROR, 0, "\n");
+}
+
+
+static int dst_type_print(struct dst_state *state, u8 type)
+{
+ char *otype;
+ switch (type) {
+ case DST_TYPE_IS_SAT:
+ otype = "satellite";
+ break;
+
+ case DST_TYPE_IS_TERR:
+ otype = "terrestrial";
+ break;
+
+ case DST_TYPE_IS_CABLE:
+ otype = "cable";
+ break;
+
+ case DST_TYPE_IS_ATSC:
+ otype = "atsc";
+ break;
+
+ default:
+ dprintk(verbose, DST_INFO, 1, "invalid dst type %d", type);
+ return -EINVAL;
+ }
+ dprintk(verbose, DST_INFO, 1, "DST type: %s", otype);
+
+ return 0;
+}
+
+static struct tuner_types tuner_list[] = {
+ {
+ .tuner_type = TUNER_TYPE_L64724,
+ .tuner_name = "L 64724",
+ .board_name = "UNKNOWN",
+ .fw_name = "UNKNOWN"
+ },
+
+ {
+ .tuner_type = TUNER_TYPE_STV0299,
+ .tuner_name = "STV 0299",
+ .board_name = "VP1020",
+ .fw_name = "DST-MOT"
+ },
+
+ {
+ .tuner_type = TUNER_TYPE_STV0299,
+ .tuner_name = "STV 0299",
+ .board_name = "VP1020",
+ .fw_name = "DST-03T"
+ },
+
+ {
+ .tuner_type = TUNER_TYPE_MB86A15,
+ .tuner_name = "MB 86A15",
+ .board_name = "VP1022",
+ .fw_name = "DST-03T"
+ },
+
+ {
+ .tuner_type = TUNER_TYPE_MB86A15,
+ .tuner_name = "MB 86A15",
+ .board_name = "VP1025",
+ .fw_name = "DST-03T"
+ },
+
+ {
+ .tuner_type = TUNER_TYPE_STV0299,
+ .tuner_name = "STV 0299",
+ .board_name = "VP1030",
+ .fw_name = "DST-CI"
+ },
+
+ {
+ .tuner_type = TUNER_TYPE_STV0299,
+ .tuner_name = "STV 0299",
+ .board_name = "VP1030",
+ .fw_name = "DSTMCI"
+ },
+
+ {
+ .tuner_type = TUNER_TYPE_UNKNOWN,
+ .tuner_name = "UNKNOWN",
+ .board_name = "VP2021",
+ .fw_name = "DCTNEW"
+ },
+
+ {
+ .tuner_type = TUNER_TYPE_UNKNOWN,
+ .tuner_name = "UNKNOWN",
+ .board_name = "VP2030",
+ .fw_name = "DCT-CI"
+ },
+
+ {
+ .tuner_type = TUNER_TYPE_UNKNOWN,
+ .tuner_name = "UNKNOWN",
+ .board_name = "VP2031",
+ .fw_name = "DCT-CI"
+ },
+
+ {
+ .tuner_type = TUNER_TYPE_UNKNOWN,
+ .tuner_name = "UNKNOWN",
+ .board_name = "VP2040",
+ .fw_name = "DCT-CI"
+ },
+
+ {
+ .tuner_type = TUNER_TYPE_UNKNOWN,
+ .tuner_name = "UNKNOWN",
+ .board_name = "VP3020",
+ .fw_name = "DTTFTA"
+ },
+
+ {
+ .tuner_type = TUNER_TYPE_UNKNOWN,
+ .tuner_name = "UNKNOWN",
+ .board_name = "VP3021",
+ .fw_name = "DTTFTA"
+ },
+
+ {
+ .tuner_type = TUNER_TYPE_TDA10046,
+ .tuner_name = "TDA10046",
+ .board_name = "VP3040",
+ .fw_name = "DTT-CI"
+ },
+
+ {
+ .tuner_type = TUNER_TYPE_UNKNOWN,
+ .tuner_name = "UNKNOWN",
+ .board_name = "VP3051",
+ .fw_name = "DTTNXT"
+ },
+
+ {
+ .tuner_type = TUNER_TYPE_NXT200x,
+ .tuner_name = "NXT200x",
+ .board_name = "VP3220",
+ .fw_name = "ATSCDI"
+ },
+
+ {
+ .tuner_type = TUNER_TYPE_NXT200x,
+ .tuner_name = "NXT200x",
+ .board_name = "VP3250",
+ .fw_name = "ATSCAD"
+ },
+};
+
+/*
+ Known cards list
+ Satellite
+ -------------------
+ 200103A
+ VP-1020 DST-MOT LG(old), TS=188
+
+ VP-1020 DST-03T LG(new), TS=204
+ VP-1022 DST-03T LG(new), TS=204
+ VP-1025 DST-03T LG(new), TS=204
+
+ VP-1030 DSTMCI, LG(new), TS=188
+ VP-1032 DSTMCI, LG(new), TS=188
+
+ Cable
+ -------------------
+ VP-2030 DCT-CI, Samsung, TS=204
+ VP-2021 DCT-CI, Unknown, TS=204
+ VP-2031 DCT-CI, Philips, TS=188
+ VP-2040 DCT-CI, Philips, TS=188, with CA daughter board
+ VP-2040 DCT-CI, Philips, TS=204, without CA daughter board
+
+ Terrestrial
+ -------------------
+ VP-3050 DTTNXT TS=188
+ VP-3040 DTT-CI, Philips, TS=188
+ VP-3040 DTT-CI, Philips, TS=204
+
+ ATSC
+ -------------------
+ VP-3220 ATSCDI, TS=188
+ VP-3250 ATSCAD, TS=188
+
+*/
+
+static struct dst_types dst_tlist[] = {
+ {
+ .device_id = "200103A",
+ .offset = 0,
+ .dst_type = DST_TYPE_IS_SAT,
+ .type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_FW_1 | DST_TYPE_HAS_OBS_REGS,
+ .dst_feature = 0,
+ .tuner_type = 0
+ }, /* obsolete */
+
+ {
+ .device_id = "DST-020",
+ .offset = 0,
+ .dst_type = DST_TYPE_IS_SAT,
+ .type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_FW_1,
+ .dst_feature = 0,
+ .tuner_type = 0
+ }, /* obsolete */
+
+ {
+ .device_id = "DST-030",
+ .offset = 0,
+ .dst_type = DST_TYPE_IS_SAT,
+ .type_flags = DST_TYPE_HAS_TS204 | DST_TYPE_HAS_TS188 | DST_TYPE_HAS_FW_1,
+ .dst_feature = 0,
+ .tuner_type = 0
+ }, /* obsolete */
+
+ {
+ .device_id = "DST-03T",
+ .offset = 0,
+ .dst_type = DST_TYPE_IS_SAT,
+ .type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_TS204 | DST_TYPE_HAS_FW_2,
+ .dst_feature = DST_TYPE_HAS_DISEQC3 | DST_TYPE_HAS_DISEQC4 | DST_TYPE_HAS_DISEQC5
+ | DST_TYPE_HAS_MAC | DST_TYPE_HAS_MOTO,
+ .tuner_type = TUNER_TYPE_MULTI
+ },
+
+ {
+ .device_id = "DST-MOT",
+ .offset = 0,
+ .dst_type = DST_TYPE_IS_SAT,
+ .type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_FW_1,
+ .dst_feature = 0,
+ .tuner_type = 0
+ }, /* obsolete */
+
+ {
+ .device_id = "DST-CI",
+ .offset = 1,
+ .dst_type = DST_TYPE_IS_SAT,
+ .type_flags = DST_TYPE_HAS_TS204 | DST_TYPE_HAS_FW_1,
+ .dst_feature = DST_TYPE_HAS_CA,
+ .tuner_type = 0
+ }, /* An OEM board */
+
+ {
+ .device_id = "DSTMCI",
+ .offset = 1,
+ .dst_type = DST_TYPE_IS_SAT,
+ .type_flags = DST_TYPE_HAS_TS188 | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_FW_BUILD | DST_TYPE_HAS_INC_COUNT | DST_TYPE_HAS_VLF,
+ .dst_feature = DST_TYPE_HAS_CA | DST_TYPE_HAS_DISEQC3 | DST_TYPE_HAS_DISEQC4
+ | DST_TYPE_HAS_MOTO | DST_TYPE_HAS_MAC,
+ .tuner_type = TUNER_TYPE_MULTI
+ },
+
+ {
+ .device_id = "DSTFCI",
+ .offset = 1,
+ .dst_type = DST_TYPE_IS_SAT,
+ .type_flags = DST_TYPE_HAS_TS188 | DST_TYPE_HAS_FW_1,
+ .dst_feature = 0,
+ .tuner_type = 0
+ }, /* unknown to vendor */
+
+ {
+ .device_id = "DCT-CI",
+ .offset = 1,
+ .dst_type = DST_TYPE_IS_CABLE,
+ .type_flags = DST_TYPE_HAS_MULTI_FE | DST_TYPE_HAS_FW_1 | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_VLF,
+ .dst_feature = DST_TYPE_HAS_CA,
+ .tuner_type = 0
+ },
+
+ {
+ .device_id = "DCTNEW",
+ .offset = 1,
+ .dst_type = DST_TYPE_IS_CABLE,
+ .type_flags = DST_TYPE_HAS_TS188 | DST_TYPE_HAS_FW_3 | DST_TYPE_HAS_FW_BUILD | DST_TYPE_HAS_MULTI_FE,
+ .dst_feature = 0,
+ .tuner_type = 0
+ },
+
+ {
+ .device_id = "DTT-CI",
+ .offset = 1,
+ .dst_type = DST_TYPE_IS_TERR,
+ .type_flags = DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_MULTI_FE | DST_TYPE_HAS_VLF,
+ .dst_feature = DST_TYPE_HAS_CA,
+ .tuner_type = 0
+ },
+
+ {
+ .device_id = "DTTDIG",
+ .offset = 1,
+ .dst_type = DST_TYPE_IS_TERR,
+ .type_flags = DST_TYPE_HAS_FW_2,
+ .dst_feature = 0,
+ .tuner_type = 0
+ },
+
+ {
+ .device_id = "DTTNXT",
+ .offset = 1,
+ .dst_type = DST_TYPE_IS_TERR,
+ .type_flags = DST_TYPE_HAS_FW_2,
+ .dst_feature = DST_TYPE_HAS_ANALOG,
+ .tuner_type = 0
+ },
+
+ {
+ .device_id = "ATSCDI",
+ .offset = 1,
+ .dst_type = DST_TYPE_IS_ATSC,
+ .type_flags = DST_TYPE_HAS_FW_2,
+ .dst_feature = 0,
+ .tuner_type = 0
+ },
+
+ {
+ .device_id = "ATSCAD",
+ .offset = 1,
+ .dst_type = DST_TYPE_IS_ATSC,
+ .type_flags = DST_TYPE_HAS_MULTI_FE | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_FW_BUILD,
+ .dst_feature = DST_TYPE_HAS_MAC | DST_TYPE_HAS_ANALOG,
+ .tuner_type = 0
+ },
+
+ { }
+
+};
+
+static int dst_get_mac(struct dst_state *state)
+{
+ u8 get_mac[] = { 0x00, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+ get_mac[7] = dst_check_sum(get_mac, 7);
+ if (dst_command(state, get_mac, 8) < 0) {
+ dprintk(verbose, DST_INFO, 1, "Unsupported Command");
+ return -1;
+ }
+ memset(&state->mac_address, '\0', 8);
+ memcpy(&state->mac_address, &state->rxbuffer, 6);
+ dprintk(verbose, DST_ERROR, 1, "MAC Address=[%pM]", state->mac_address);
+
+ return 0;
+}
+
+static int dst_fw_ver(struct dst_state *state)
+{
+ u8 get_ver[] = { 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+ get_ver[7] = dst_check_sum(get_ver, 7);
+ if (dst_command(state, get_ver, 8) < 0) {
+ dprintk(verbose, DST_INFO, 1, "Unsupported Command");
+ return -1;
+ }
+ memcpy(&state->fw_version, &state->rxbuffer, 8);
+ dprintk(verbose, DST_ERROR, 1, "Firmware Ver = %x.%x Build = %02x, on %x:%x, %x-%x-20%02x",
+ state->fw_version[0] >> 4, state->fw_version[0] & 0x0f,
+ state->fw_version[1],
+ state->fw_version[5], state->fw_version[6],
+ state->fw_version[4], state->fw_version[3], state->fw_version[2]);
+
+ return 0;
+}
+
+static int dst_card_type(struct dst_state *state)
+{
+ int j;
+ struct tuner_types *p_tuner_list = NULL;
+
+ u8 get_type[] = { 0x00, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+ get_type[7] = dst_check_sum(get_type, 7);
+ if (dst_command(state, get_type, 8) < 0) {
+ dprintk(verbose, DST_INFO, 1, "Unsupported Command");
+ return -1;
+ }
+ memset(&state->card_info, '\0', 8);
+ memcpy(&state->card_info, &state->rxbuffer, 7);
+ dprintk(verbose, DST_ERROR, 1, "Device Model=[%s]", &state->card_info[0]);
+
+ for (j = 0, p_tuner_list = tuner_list; j < ARRAY_SIZE(tuner_list); j++, p_tuner_list++) {
+ if (!strcmp(&state->card_info[0], p_tuner_list->board_name)) {
+ state->tuner_type = p_tuner_list->tuner_type;
+ dprintk(verbose, DST_ERROR, 1, "DST has [%s] tuner, tuner type=[%d]",
+ p_tuner_list->tuner_name, p_tuner_list->tuner_type);
+ }
+ }
+
+ return 0;
+}
+
+static int dst_get_vendor(struct dst_state *state)
+{
+ u8 get_vendor[] = { 0x00, 0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+ get_vendor[7] = dst_check_sum(get_vendor, 7);
+ if (dst_command(state, get_vendor, 8) < 0) {
+ dprintk(verbose, DST_INFO, 1, "Unsupported Command");
+ return -1;
+ }
+ memset(&state->vendor, '\0', 8);
+ memcpy(&state->vendor, &state->rxbuffer, 7);
+ dprintk(verbose, DST_ERROR, 1, "Vendor=[%s]", &state->vendor[0]);
+
+ return 0;
+}
+
+static void debug_dst_buffer(struct dst_state *state)
+{
+ int i;
+
+ if (verbose > 2) {
+ printk("%s: [", __func__);
+ for (i = 0; i < 8; i++)
+ printk(" %02x", state->rxbuffer[i]);
+ printk("]\n");
+ }
+}
+
+static int dst_check_stv0299(struct dst_state *state)
+{
+ u8 check_stv0299[] = { 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+
+ check_stv0299[7] = dst_check_sum(check_stv0299, 7);
+ if (dst_command(state, check_stv0299, 8) < 0) {
+ dprintk(verbose, DST_ERROR, 1, "Cmd=[0x04] failed");
+ return -1;
+ }
+ debug_dst_buffer(state);
+
+ if (memcmp(&check_stv0299, &state->rxbuffer, 8)) {
+ dprintk(verbose, DST_ERROR, 1, "Found a STV0299 NIM");
+ state->tuner_type = TUNER_TYPE_STV0299;
+ return 0;
+ }
+
+ return -1;
+}
+
+static int dst_check_mb86a15(struct dst_state *state)
+{
+ u8 check_mb86a15[] = { 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+
+ check_mb86a15[7] = dst_check_sum(check_mb86a15, 7);
+ if (dst_command(state, check_mb86a15, 8) < 0) {
+ dprintk(verbose, DST_ERROR, 1, "Cmd=[0x10], failed");
+ return -1;
+ }
+ debug_dst_buffer(state);
+
+ if (memcmp(&check_mb86a15, &state->rxbuffer, 8) < 0) {
+ dprintk(verbose, DST_ERROR, 1, "Found a MB86A15 NIM");
+ state->tuner_type = TUNER_TYPE_MB86A15;
+ return 0;
+ }
+
+ return -1;
+}
+
+static int dst_get_tuner_info(struct dst_state *state)
+{
+ u8 get_tuner_1[] = { 0x00, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+ u8 get_tuner_2[] = { 0x00, 0x0b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+
+ get_tuner_1[7] = dst_check_sum(get_tuner_1, 7);
+ get_tuner_2[7] = dst_check_sum(get_tuner_2, 7);
+ dprintk(verbose, DST_ERROR, 1, "DST TYpe = MULTI FE");
+ if (state->type_flags & DST_TYPE_HAS_MULTI_FE) {
+ if (dst_command(state, get_tuner_1, 8) < 0) {
+ dprintk(verbose, DST_INFO, 1, "Cmd=[0x13], Unsupported");
+ goto force;
+ }
+ } else {
+ if (dst_command(state, get_tuner_2, 8) < 0) {
+ dprintk(verbose, DST_INFO, 1, "Cmd=[0xb], Unsupported");
+ goto force;
+ }
+ }
+ memcpy(&state->board_info, &state->rxbuffer, 8);
+ if (state->type_flags & DST_TYPE_HAS_MULTI_FE) {
+ dprintk(verbose, DST_ERROR, 1, "DST type has TS=188");
+ }
+ if (state->board_info[0] == 0xbc) {
+ if (state->dst_type != DST_TYPE_IS_ATSC)
+ state->type_flags |= DST_TYPE_HAS_TS188;
+ else
+ state->type_flags |= DST_TYPE_HAS_NEWTUNE_2;
+
+ if (state->board_info[1] == 0x01) {
+ state->dst_hw_cap |= DST_TYPE_HAS_DBOARD;
+ dprintk(verbose, DST_ERROR, 1, "DST has Daughterboard");
+ }
+ }
+
+ return 0;
+force:
+ if (!strncmp(state->fw_name, "DCT-CI", 6)) {
+ state->type_flags |= DST_TYPE_HAS_TS204;
+ dprintk(verbose, DST_ERROR, 1, "Forcing [%s] to TS188", state->fw_name);
+ }
+
+ return -1;
+}
+
+static int dst_get_device_id(struct dst_state *state)
+{
+ u8 reply;
+
+ int i, j;
+ struct dst_types *p_dst_type = NULL;
+ struct tuner_types *p_tuner_list = NULL;
+
+ u8 use_dst_type = 0;
+ u32 use_type_flags = 0;
+
+ static u8 device_type[8] = {0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff};
+
+ state->tuner_type = 0;
+ device_type[7] = dst_check_sum(device_type, 7);
+
+ if (write_dst(state, device_type, FIXED_COMM))
+ return -1; /* Write failed */
+ if ((dst_pio_disable(state)) < 0)
+ return -1;
+ if (read_dst(state, &reply, GET_ACK))
+ return -1; /* Read failure */
+ if (reply != ACK) {
+ dprintk(verbose, DST_INFO, 1, "Write not Acknowledged! [Reply=0x%02x]", reply);
+ return -1; /* Unack'd write */
+ }
+ if (!dst_wait_dst_ready(state, DEVICE_INIT))
+ return -1; /* DST not ready yet */
+ if (read_dst(state, state->rxbuffer, FIXED_COMM))
+ return -1;
+
+ dst_pio_disable(state);
+ if (state->rxbuffer[7] != dst_check_sum(state->rxbuffer, 7)) {
+ dprintk(verbose, DST_INFO, 1, "Checksum failure!");
+ return -1; /* Checksum failure */
+ }
+ state->rxbuffer[7] = '\0';
+
+ for (i = 0, p_dst_type = dst_tlist; i < ARRAY_SIZE(dst_tlist); i++, p_dst_type++) {
+ if (!strncmp (&state->rxbuffer[p_dst_type->offset], p_dst_type->device_id, strlen (p_dst_type->device_id))) {
+ use_type_flags = p_dst_type->type_flags;
+ use_dst_type = p_dst_type->dst_type;
+
+ /* Card capabilities */
+ state->dst_hw_cap = p_dst_type->dst_feature;
+ dprintk(verbose, DST_ERROR, 1, "Recognise [%s]", p_dst_type->device_id);
+ strncpy(&state->fw_name[0], p_dst_type->device_id, 6);
+ /* Multiple tuners */
+ if (p_dst_type->tuner_type & TUNER_TYPE_MULTI) {
+ switch (use_dst_type) {
+ case DST_TYPE_IS_SAT:
+ /* STV0299 check */
+ if (dst_check_stv0299(state) < 0) {
+ dprintk(verbose, DST_ERROR, 1, "Unsupported");
+ state->tuner_type = TUNER_TYPE_MB86A15;
+ }
+ break;
+ default:
+ break;
+ }
+ if (dst_check_mb86a15(state) < 0)
+ dprintk(verbose, DST_ERROR, 1, "Unsupported");
+ /* Single tuner */
+ } else {
+ state->tuner_type = p_dst_type->tuner_type;
+ }
+ for (j = 0, p_tuner_list = tuner_list; j < ARRAY_SIZE(tuner_list); j++, p_tuner_list++) {
+ if (!(strncmp(p_dst_type->device_id, p_tuner_list->fw_name, 7)) &&
+ p_tuner_list->tuner_type == state->tuner_type) {
+ dprintk(verbose, DST_ERROR, 1, "[%s] has a [%s]",
+ p_dst_type->device_id, p_tuner_list->tuner_name);
+ }
+ }
+ break;
+ }
+ }
+
+ if (i >= ARRAY_SIZE(dst_tlist)) {
+ dprintk(verbose, DST_ERROR, 1, "Unable to recognize %s or %s", &state->rxbuffer[0], &state->rxbuffer[1]);
+ dprintk(verbose, DST_ERROR, 1, "please email linux-dvb@linuxtv.org with this type in");
+ use_dst_type = DST_TYPE_IS_SAT;
+ use_type_flags = DST_TYPE_HAS_SYMDIV;
+ }
+ dst_type_print(state, use_dst_type);
+ state->type_flags = use_type_flags;
+ state->dst_type = use_dst_type;
+ dst_type_flags_print(state);
+
+ return 0;
+}
+
+static int dst_probe(struct dst_state *state)
+{
+ mutex_init(&state->dst_mutex);
+ if (dst_addons & DST_TYPE_HAS_CA) {
+ if ((rdc_8820_reset(state)) < 0) {
+ dprintk(verbose, DST_ERROR, 1, "RDC 8820 RESET Failed.");
+ return -1;
+ }
+ msleep(4000);
+ } else {
+ msleep(100);
+ }
+ if ((dst_comm_init(state)) < 0) {
+ dprintk(verbose, DST_ERROR, 1, "DST Initialization Failed.");
+ return -1;
+ }
+ msleep(100);
+ if (dst_get_device_id(state) < 0) {
+ dprintk(verbose, DST_ERROR, 1, "unknown device.");
+ return -1;
+ }
+ if (dst_get_mac(state) < 0) {
+ dprintk(verbose, DST_INFO, 1, "MAC: Unsupported command");
+ }
+ if ((state->type_flags & DST_TYPE_HAS_MULTI_FE) || (state->type_flags & DST_TYPE_HAS_FW_BUILD)) {
+ if (dst_get_tuner_info(state) < 0)
+ dprintk(verbose, DST_INFO, 1, "Tuner: Unsupported command");
+ }
+ if (state->type_flags & DST_TYPE_HAS_TS204) {
+ dst_packsize(state, 204);
+ }
+ if (state->type_flags & DST_TYPE_HAS_FW_BUILD) {
+ if (dst_fw_ver(state) < 0) {
+ dprintk(verbose, DST_INFO, 1, "FW: Unsupported command");
+ return 0;
+ }
+ if (dst_card_type(state) < 0) {
+ dprintk(verbose, DST_INFO, 1, "Card: Unsupported command");
+ return 0;
+ }
+ if (dst_get_vendor(state) < 0) {
+ dprintk(verbose, DST_INFO, 1, "Vendor: Unsupported command");
+ return 0;
+ }
+ }
+
+ return 0;
+}
+
+static int dst_command(struct dst_state *state, u8 *data, u8 len)
+{
+ u8 reply;
+
+ mutex_lock(&state->dst_mutex);
+ if ((dst_comm_init(state)) < 0) {
+ dprintk(verbose, DST_NOTICE, 1, "DST Communication Initialization Failed.");
+ goto error;
+ }
+ if (write_dst(state, data, len)) {
+ dprintk(verbose, DST_INFO, 1, "Trying to recover.. ");
+ if ((dst_error_recovery(state)) < 0) {
+ dprintk(verbose, DST_ERROR, 1, "Recovery Failed.");
+ goto error;
+ }
+ goto error;
+ }
+ if ((dst_pio_disable(state)) < 0) {
+ dprintk(verbose, DST_ERROR, 1, "PIO Disable Failed.");
+ goto error;
+ }
+ if (state->type_flags & DST_TYPE_HAS_FW_1)
+ mdelay(3);
+ if (read_dst(state, &reply, GET_ACK)) {
+ dprintk(verbose, DST_DEBUG, 1, "Trying to recover.. ");
+ if ((dst_error_recovery(state)) < 0) {
+ dprintk(verbose, DST_INFO, 1, "Recovery Failed.");
+ goto error;
+ }
+ goto error;
+ }
+ if (reply != ACK) {
+ dprintk(verbose, DST_INFO, 1, "write not acknowledged 0x%02x ", reply);
+ goto error;
+ }
+ if (len >= 2 && data[0] == 0 && (data[1] == 1 || data[1] == 3))
+ goto error;
+ if (state->type_flags & DST_TYPE_HAS_FW_1)
+ mdelay(3);
+ else
+ udelay(2000);
+ if (!dst_wait_dst_ready(state, NO_DELAY))
+ goto error;
+ if (read_dst(state, state->rxbuffer, FIXED_COMM)) {
+ dprintk(verbose, DST_DEBUG, 1, "Trying to recover.. ");
+ if ((dst_error_recovery(state)) < 0) {
+ dprintk(verbose, DST_INFO, 1, "Recovery failed.");
+ goto error;
+ }
+ goto error;
+ }
+ if (state->rxbuffer[7] != dst_check_sum(state->rxbuffer, 7)) {
+ dprintk(verbose, DST_INFO, 1, "checksum failure");
+ goto error;
+ }
+ mutex_unlock(&state->dst_mutex);
+ return 0;
+
+error:
+ mutex_unlock(&state->dst_mutex);
+ return -EIO;
+
+}
+
+static int dst_get_signal(struct dst_state *state)
+{
+ int retval;
+ u8 get_signal[] = { 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfb };
+ //dprintk("%s: Getting Signal strength and other parameters\n", __func__);
+ if ((state->diseq_flags & ATTEMPT_TUNE) == 0) {
+ state->decode_lock = state->decode_strength = state->decode_snr = 0;
+ return 0;
+ }
+ if (0 == (state->diseq_flags & HAS_LOCK)) {
+ state->decode_lock = state->decode_strength = state->decode_snr = 0;
+ return 0;
+ }
+ if (time_after_eq(jiffies, state->cur_jiff + (HZ / 5))) {
+ retval = dst_command(state, get_signal, 8);
+ if (retval < 0)
+ return retval;
+ if (state->dst_type == DST_TYPE_IS_SAT) {
+ state->decode_lock = ((state->rxbuffer[6] & 0x10) == 0) ? 1 : 0;
+ state->decode_strength = state->rxbuffer[5] << 8;
+ state->decode_snr = state->rxbuffer[2] << 8 | state->rxbuffer[3];
+ } else if ((state->dst_type == DST_TYPE_IS_TERR) || (state->dst_type == DST_TYPE_IS_CABLE)) {
+ state->decode_lock = (state->rxbuffer[1]) ? 1 : 0;
+ state->decode_strength = state->rxbuffer[4] << 8;
+ state->decode_snr = state->rxbuffer[3] << 8;
+ } else if (state->dst_type == DST_TYPE_IS_ATSC) {
+ state->decode_lock = (state->rxbuffer[6] == 0x00) ? 1 : 0;
+ state->decode_strength = state->rxbuffer[4] << 8;
+ state->decode_snr = state->rxbuffer[2] << 8 | state->rxbuffer[3];
+ }
+ state->cur_jiff = jiffies;
+ }
+ return 0;
+}
+
+static int dst_tone_power_cmd(struct dst_state *state)
+{
+ u8 paket[8] = { 0x00, 0x09, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00 };
+
+ if (state->dst_type != DST_TYPE_IS_SAT)
+ return -EOPNOTSUPP;
+ paket[4] = state->tx_tuna[4];
+ paket[2] = state->tx_tuna[2];
+ paket[3] = state->tx_tuna[3];
+ paket[7] = dst_check_sum (paket, 7);
+ return dst_command(state, paket, 8);
+}
+
+static int dst_get_tuna(struct dst_state *state)
+{
+ int retval;
+
+ if ((state->diseq_flags & ATTEMPT_TUNE) == 0)
+ return 0;
+ state->diseq_flags &= ~(HAS_LOCK);
+ if (!dst_wait_dst_ready(state, NO_DELAY))
+ return -EIO;
+ if ((state->type_flags & DST_TYPE_HAS_VLF) &&
+ !(state->dst_type == DST_TYPE_IS_ATSC))
+
+ retval = read_dst(state, state->rx_tuna, 10);
+ else
+ retval = read_dst(state, &state->rx_tuna[2], FIXED_COMM);
+ if (retval < 0) {
+ dprintk(verbose, DST_DEBUG, 1, "read not successful");
+ return retval;
+ }
+ if ((state->type_flags & DST_TYPE_HAS_VLF) &&
+ !(state->dst_type == DST_TYPE_IS_ATSC)) {
+
+ if (state->rx_tuna[9] != dst_check_sum(&state->rx_tuna[0], 9)) {
+ dprintk(verbose, DST_INFO, 1, "checksum failure ? ");
+ return -EIO;
+ }
+ } else {
+ if (state->rx_tuna[9] != dst_check_sum(&state->rx_tuna[2], 7)) {
+ dprintk(verbose, DST_INFO, 1, "checksum failure? ");
+ return -EIO;
+ }
+ }
+ if (state->rx_tuna[2] == 0 && state->rx_tuna[3] == 0)
+ return 0;
+ if (state->dst_type == DST_TYPE_IS_SAT) {
+ state->decode_freq = ((state->rx_tuna[2] & 0x7f) << 8) + state->rx_tuna[3];
+ } else {
+ state->decode_freq = ((state->rx_tuna[2] & 0x7f) << 16) + (state->rx_tuna[3] << 8) + state->rx_tuna[4];
+ }
+ state->decode_freq = state->decode_freq * 1000;
+ state->decode_lock = 1;
+ state->diseq_flags |= HAS_LOCK;
+
+ return 1;
+}
+
+static int dst_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage);
+
+static int dst_write_tuna(struct dvb_frontend *fe)
+{
+ struct dst_state *state = fe->demodulator_priv;
+ int retval;
+ u8 reply;
+
+ dprintk(verbose, DST_INFO, 1, "type_flags 0x%x ", state->type_flags);
+ state->decode_freq = 0;
+ state->decode_lock = state->decode_strength = state->decode_snr = 0;
+ if (state->dst_type == DST_TYPE_IS_SAT) {
+ if (!(state->diseq_flags & HAS_POWER))
+ dst_set_voltage(fe, SEC_VOLTAGE_13);
+ }
+ state->diseq_flags &= ~(HAS_LOCK | ATTEMPT_TUNE);
+ mutex_lock(&state->dst_mutex);
+ if ((dst_comm_init(state)) < 0) {
+ dprintk(verbose, DST_DEBUG, 1, "DST Communication initialization failed.");
+ goto error;
+ }
+// if (state->type_flags & DST_TYPE_HAS_NEWTUNE) {
+ if ((state->type_flags & DST_TYPE_HAS_VLF) &&
+ (!(state->dst_type == DST_TYPE_IS_ATSC))) {
+
+ state->tx_tuna[9] = dst_check_sum(&state->tx_tuna[0], 9);
+ retval = write_dst(state, &state->tx_tuna[0], 10);
+ } else {
+ state->tx_tuna[9] = dst_check_sum(&state->tx_tuna[2], 7);
+ retval = write_dst(state, &state->tx_tuna[2], FIXED_COMM);
+ }
+ if (retval < 0) {
+ dst_pio_disable(state);
+ dprintk(verbose, DST_DEBUG, 1, "write not successful");
+ goto werr;
+ }
+ if ((dst_pio_disable(state)) < 0) {
+ dprintk(verbose, DST_DEBUG, 1, "DST PIO disable failed !");
+ goto error;
+ }
+ if ((read_dst(state, &reply, GET_ACK) < 0)) {
+ dprintk(verbose, DST_DEBUG, 1, "read verify not successful.");
+ goto error;
+ }
+ if (reply != ACK) {
+ dprintk(verbose, DST_DEBUG, 1, "write not acknowledged 0x%02x ", reply);
+ goto error;
+ }
+ state->diseq_flags |= ATTEMPT_TUNE;
+ retval = dst_get_tuna(state);
+werr:
+ mutex_unlock(&state->dst_mutex);
+ return retval;
+
+error:
+ mutex_unlock(&state->dst_mutex);
+ return -EIO;
+}
+
+/*
+ * line22k0 0x00, 0x09, 0x00, 0xff, 0x01, 0x00, 0x00, 0x00
+ * line22k1 0x00, 0x09, 0x01, 0xff, 0x01, 0x00, 0x00, 0x00
+ * line22k2 0x00, 0x09, 0x02, 0xff, 0x01, 0x00, 0x00, 0x00
+ * tone 0x00, 0x09, 0xff, 0x00, 0x01, 0x00, 0x00, 0x00
+ * data 0x00, 0x09, 0xff, 0x01, 0x01, 0x00, 0x00, 0x00
+ * power_off 0x00, 0x09, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00
+ * power_on 0x00, 0x09, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00
+ * Diseqc 1 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf0, 0xec
+ * Diseqc 2 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf4, 0xe8
+ * Diseqc 3 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf8, 0xe4
+ * Diseqc 4 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xfc, 0xe0
+ */
+
+static int dst_set_diseqc(struct dvb_frontend *fe, struct dvb_diseqc_master_cmd *cmd)
+{
+ struct dst_state *state = fe->demodulator_priv;
+ u8 paket[8] = { 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf0, 0xec };
+
+ if (state->dst_type != DST_TYPE_IS_SAT)
+ return -EOPNOTSUPP;
+ if (cmd->msg_len > 0 && cmd->msg_len < 5)
+ memcpy(&paket[3], cmd->msg, cmd->msg_len);
+ else if (cmd->msg_len == 5 && state->dst_hw_cap & DST_TYPE_HAS_DISEQC5)
+ memcpy(&paket[2], cmd->msg, cmd->msg_len);
+ else
+ return -EINVAL;
+ paket[7] = dst_check_sum(&paket[0], 7);
+ return dst_command(state, paket, 8);
+}
+
+static int dst_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+ int need_cmd, retval = 0;
+ struct dst_state *state = fe->demodulator_priv;
+
+ state->voltage = voltage;
+ if (state->dst_type != DST_TYPE_IS_SAT)
+ return -EOPNOTSUPP;
+
+ need_cmd = 0;
+
+ switch (voltage) {
+ case SEC_VOLTAGE_13:
+ case SEC_VOLTAGE_18:
+ if ((state->diseq_flags & HAS_POWER) == 0)
+ need_cmd = 1;
+ state->diseq_flags |= HAS_POWER;
+ state->tx_tuna[4] = 0x01;
+ break;
+ case SEC_VOLTAGE_OFF:
+ need_cmd = 1;
+ state->diseq_flags &= ~(HAS_POWER | HAS_LOCK | ATTEMPT_TUNE);
+ state->tx_tuna[4] = 0x00;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (need_cmd)
+ retval = dst_tone_power_cmd(state);
+
+ return retval;
+}
+
+static int dst_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
+{
+ struct dst_state *state = fe->demodulator_priv;
+
+ state->tone = tone;
+ if (state->dst_type != DST_TYPE_IS_SAT)
+ return -EOPNOTSUPP;
+
+ switch (tone) {
+ case SEC_TONE_OFF:
+ if (state->type_flags & DST_TYPE_HAS_OBS_REGS)
+ state->tx_tuna[2] = 0x00;
+ else
+ state->tx_tuna[2] = 0xff;
+ break;
+
+ case SEC_TONE_ON:
+ state->tx_tuna[2] = 0x02;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return dst_tone_power_cmd(state);
+}
+
+static int dst_send_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t minicmd)
+{
+ struct dst_state *state = fe->demodulator_priv;
+
+ if (state->dst_type != DST_TYPE_IS_SAT)
+ return -EOPNOTSUPP;
+ state->minicmd = minicmd;
+ switch (minicmd) {
+ case SEC_MINI_A:
+ state->tx_tuna[3] = 0x02;
+ break;
+ case SEC_MINI_B:
+ state->tx_tuna[3] = 0xff;
+ break;
+ }
+ return dst_tone_power_cmd(state);
+}
+
+
+static int dst_init(struct dvb_frontend *fe)
+{
+ struct dst_state *state = fe->demodulator_priv;
+
+ static u8 sat_tuna_188[] = { 0x09, 0x00, 0x03, 0xb6, 0x01, 0x00, 0x73, 0x21, 0x00, 0x00 };
+ static u8 sat_tuna_204[] = { 0x00, 0x00, 0x03, 0xb6, 0x01, 0x55, 0xbd, 0x50, 0x00, 0x00 };
+ static u8 ter_tuna_188[] = { 0x09, 0x00, 0x03, 0xb6, 0x01, 0x07, 0x00, 0x00, 0x00, 0x00 };
+ static u8 ter_tuna_204[] = { 0x00, 0x00, 0x03, 0xb6, 0x01, 0x07, 0x00, 0x00, 0x00, 0x00 };
+ static u8 cab_tuna_188[] = { 0x09, 0x00, 0x03, 0xb6, 0x01, 0x07, 0x00, 0x00, 0x00, 0x00 };
+ static u8 cab_tuna_204[] = { 0x00, 0x00, 0x03, 0xb6, 0x01, 0x07, 0x00, 0x00, 0x00, 0x00 };
+ static u8 atsc_tuner[] = { 0x00, 0x00, 0x03, 0xb6, 0x01, 0x07, 0x00, 0x00, 0x00, 0x00 };
+
+ state->inversion = INVERSION_OFF;
+ state->voltage = SEC_VOLTAGE_13;
+ state->tone = SEC_TONE_OFF;
+ state->diseq_flags = 0;
+ state->k22 = 0x02;
+ state->bandwidth = 7000000;
+ state->cur_jiff = jiffies;
+ if (state->dst_type == DST_TYPE_IS_SAT)
+ memcpy(state->tx_tuna, ((state->type_flags & DST_TYPE_HAS_VLF) ? sat_tuna_188 : sat_tuna_204), sizeof (sat_tuna_204));
+ else if (state->dst_type == DST_TYPE_IS_TERR)
+ memcpy(state->tx_tuna, ((state->type_flags & DST_TYPE_HAS_VLF) ? ter_tuna_188 : ter_tuna_204), sizeof (ter_tuna_204));
+ else if (state->dst_type == DST_TYPE_IS_CABLE)
+ memcpy(state->tx_tuna, ((state->type_flags & DST_TYPE_HAS_VLF) ? cab_tuna_188 : cab_tuna_204), sizeof (cab_tuna_204));
+ else if (state->dst_type == DST_TYPE_IS_ATSC)
+ memcpy(state->tx_tuna, atsc_tuner, sizeof (atsc_tuner));
+
+ return 0;
+}
+
+static int dst_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+ struct dst_state *state = fe->demodulator_priv;
+
+ *status = 0;
+ if (state->diseq_flags & HAS_LOCK) {
+// dst_get_signal(state); // don't require(?) to ask MCU
+ if (state->decode_lock)
+ *status |= FE_HAS_LOCK | FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_SYNC | FE_HAS_VITERBI;
+ }
+
+ return 0;
+}
+
+static int dst_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+ struct dst_state *state = fe->demodulator_priv;
+
+ int retval = dst_get_signal(state);
+ *strength = state->decode_strength;
+
+ return retval;
+}
+
+static int dst_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ struct dst_state *state = fe->demodulator_priv;
+
+ int retval = dst_get_signal(state);
+ *snr = state->decode_snr;
+
+ return retval;
+}
+
+static int dst_set_frontend(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ int retval = -EINVAL;
+ struct dst_state *state = fe->demodulator_priv;
+
+ if (p != NULL) {
+ retval = dst_set_freq(state, p->frequency);
+ if(retval != 0)
+ return retval;
+ dprintk(verbose, DST_DEBUG, 1, "Set Frequency=[%d]", p->frequency);
+
+ if (state->dst_type == DST_TYPE_IS_SAT) {
+ if (state->type_flags & DST_TYPE_HAS_OBS_REGS)
+ dst_set_inversion(state, p->inversion);
+ dst_set_fec(state, p->fec_inner);
+ dst_set_symbolrate(state, p->symbol_rate);
+ dst_set_polarization(state);
+ dprintk(verbose, DST_DEBUG, 1, "Set Symbolrate=[%d]", p->symbol_rate);
+
+ } else if (state->dst_type == DST_TYPE_IS_TERR)
+ dst_set_bandwidth(state, p->bandwidth_hz);
+ else if (state->dst_type == DST_TYPE_IS_CABLE) {
+ dst_set_fec(state, p->fec_inner);
+ dst_set_symbolrate(state, p->symbol_rate);
+ dst_set_modulation(state, p->modulation);
+ }
+ retval = dst_write_tuna(fe);
+ }
+
+ return retval;
+}
+
+static int dst_tune_frontend(struct dvb_frontend* fe,
+ bool re_tune,
+ unsigned int mode_flags,
+ unsigned int *delay,
+ fe_status_t *status)
+{
+ struct dst_state *state = fe->demodulator_priv;
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+
+ if (re_tune) {
+ dst_set_freq(state, p->frequency);
+ dprintk(verbose, DST_DEBUG, 1, "Set Frequency=[%d]", p->frequency);
+
+ if (state->dst_type == DST_TYPE_IS_SAT) {
+ if (state->type_flags & DST_TYPE_HAS_OBS_REGS)
+ dst_set_inversion(state, p->inversion);
+ dst_set_fec(state, p->fec_inner);
+ dst_set_symbolrate(state, p->symbol_rate);
+ dst_set_polarization(state);
+ dprintk(verbose, DST_DEBUG, 1, "Set Symbolrate=[%d]", p->symbol_rate);
+
+ } else if (state->dst_type == DST_TYPE_IS_TERR)
+ dst_set_bandwidth(state, p->bandwidth_hz);
+ else if (state->dst_type == DST_TYPE_IS_CABLE) {
+ dst_set_fec(state, p->fec_inner);
+ dst_set_symbolrate(state, p->symbol_rate);
+ dst_set_modulation(state, p->modulation);
+ }
+ dst_write_tuna(fe);
+ }
+
+ if (!(mode_flags & FE_TUNE_MODE_ONESHOT))
+ dst_read_status(fe, status);
+
+ *delay = HZ/10;
+ return 0;
+}
+
+static int dst_get_tuning_algo(struct dvb_frontend *fe)
+{
+ return dst_algo ? DVBFE_ALGO_HW : DVBFE_ALGO_SW;
+}
+
+static int dst_get_frontend(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ struct dst_state *state = fe->demodulator_priv;
+
+ p->frequency = state->decode_freq;
+ if (state->dst_type == DST_TYPE_IS_SAT) {
+ if (state->type_flags & DST_TYPE_HAS_OBS_REGS)
+ p->inversion = state->inversion;
+ p->symbol_rate = state->symbol_rate;
+ p->fec_inner = dst_get_fec(state);
+ } else if (state->dst_type == DST_TYPE_IS_TERR) {
+ p->bandwidth_hz = state->bandwidth;
+ } else if (state->dst_type == DST_TYPE_IS_CABLE) {
+ p->symbol_rate = state->symbol_rate;
+ p->fec_inner = dst_get_fec(state);
+ p->modulation = dst_get_modulation(state);
+ }
+
+ return 0;
+}
+
+static void dst_release(struct dvb_frontend *fe)
+{
+ struct dst_state *state = fe->demodulator_priv;
+ if (state->dst_ca) {
+ dvb_unregister_device(state->dst_ca);
+#ifdef CONFIG_MEDIA_ATTACH
+ symbol_put(dst_ca_attach);
+#endif
+ }
+ kfree(state);
+}
+
+static struct dvb_frontend_ops dst_dvbt_ops;
+static struct dvb_frontend_ops dst_dvbs_ops;
+static struct dvb_frontend_ops dst_dvbc_ops;
+static struct dvb_frontend_ops dst_atsc_ops;
+
+struct dst_state *dst_attach(struct dst_state *state, struct dvb_adapter *dvb_adapter)
+{
+ /* check if the ASIC is there */
+ if (dst_probe(state) < 0) {
+ kfree(state);
+ return NULL;
+ }
+ /* determine settings based on type */
+ /* create dvb_frontend */
+ switch (state->dst_type) {
+ case DST_TYPE_IS_TERR:
+ memcpy(&state->frontend.ops, &dst_dvbt_ops, sizeof(struct dvb_frontend_ops));
+ break;
+ case DST_TYPE_IS_CABLE:
+ memcpy(&state->frontend.ops, &dst_dvbc_ops, sizeof(struct dvb_frontend_ops));
+ break;
+ case DST_TYPE_IS_SAT:
+ memcpy(&state->frontend.ops, &dst_dvbs_ops, sizeof(struct dvb_frontend_ops));
+ break;
+ case DST_TYPE_IS_ATSC:
+ memcpy(&state->frontend.ops, &dst_atsc_ops, sizeof(struct dvb_frontend_ops));
+ break;
+ default:
+ dprintk(verbose, DST_ERROR, 1, "unknown DST type. please report to the LinuxTV.org DVB mailinglist.");
+ kfree(state);
+ return NULL;
+ }
+ state->frontend.demodulator_priv = state;
+
+ return state; /* Manu (DST is a card not a frontend) */
+}
+
+EXPORT_SYMBOL(dst_attach);
+
+static struct dvb_frontend_ops dst_dvbt_ops = {
+ .delsys = { SYS_DVBT },
+ .info = {
+ .name = "DST DVB-T",
+ .frequency_min = 137000000,
+ .frequency_max = 858000000,
+ .frequency_stepsize = 166667,
+ .caps = FE_CAN_FEC_AUTO |
+ FE_CAN_QAM_AUTO |
+ FE_CAN_QAM_16 |
+ FE_CAN_QAM_32 |
+ FE_CAN_QAM_64 |
+ FE_CAN_QAM_128 |
+ FE_CAN_QAM_256 |
+ FE_CAN_TRANSMISSION_MODE_AUTO |
+ FE_CAN_GUARD_INTERVAL_AUTO
+ },
+
+ .release = dst_release,
+ .init = dst_init,
+ .tune = dst_tune_frontend,
+ .set_frontend = dst_set_frontend,
+ .get_frontend = dst_get_frontend,
+ .get_frontend_algo = dst_get_tuning_algo,
+ .read_status = dst_read_status,
+ .read_signal_strength = dst_read_signal_strength,
+ .read_snr = dst_read_snr,
+};
+
+static struct dvb_frontend_ops dst_dvbs_ops = {
+ .delsys = { SYS_DVBS },
+ .info = {
+ .name = "DST DVB-S",
+ .frequency_min = 950000,
+ .frequency_max = 2150000,
+ .frequency_stepsize = 1000, /* kHz for QPSK frontends */
+ .frequency_tolerance = 29500,
+ .symbol_rate_min = 1000000,
+ .symbol_rate_max = 45000000,
+ /* . symbol_rate_tolerance = ???,*/
+ .caps = FE_CAN_FEC_AUTO | FE_CAN_QPSK
+ },
+
+ .release = dst_release,
+ .init = dst_init,
+ .tune = dst_tune_frontend,
+ .set_frontend = dst_set_frontend,
+ .get_frontend = dst_get_frontend,
+ .get_frontend_algo = dst_get_tuning_algo,
+ .read_status = dst_read_status,
+ .read_signal_strength = dst_read_signal_strength,
+ .read_snr = dst_read_snr,
+ .diseqc_send_burst = dst_send_burst,
+ .diseqc_send_master_cmd = dst_set_diseqc,
+ .set_voltage = dst_set_voltage,
+ .set_tone = dst_set_tone,
+};
+
+static struct dvb_frontend_ops dst_dvbc_ops = {
+ .delsys = { SYS_DVBC_ANNEX_A },
+ .info = {
+ .name = "DST DVB-C",
+ .frequency_stepsize = 62500,
+ .frequency_min = 51000000,
+ .frequency_max = 858000000,
+ .symbol_rate_min = 1000000,
+ .symbol_rate_max = 45000000,
+ .caps = FE_CAN_FEC_AUTO |
+ FE_CAN_QAM_AUTO |
+ FE_CAN_QAM_16 |
+ FE_CAN_QAM_32 |
+ FE_CAN_QAM_64 |
+ FE_CAN_QAM_128 |
+ FE_CAN_QAM_256
+ },
+
+ .release = dst_release,
+ .init = dst_init,
+ .tune = dst_tune_frontend,
+ .set_frontend = dst_set_frontend,
+ .get_frontend = dst_get_frontend,
+ .get_frontend_algo = dst_get_tuning_algo,
+ .read_status = dst_read_status,
+ .read_signal_strength = dst_read_signal_strength,
+ .read_snr = dst_read_snr,
+};
+
+static struct dvb_frontend_ops dst_atsc_ops = {
+ .delsys = { SYS_ATSC },
+ .info = {
+ .name = "DST ATSC",
+ .frequency_stepsize = 62500,
+ .frequency_min = 510000000,
+ .frequency_max = 858000000,
+ .symbol_rate_min = 1000000,
+ .symbol_rate_max = 45000000,
+ .caps = FE_CAN_FEC_AUTO | FE_CAN_QAM_AUTO | FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB
+ },
+
+ .release = dst_release,
+ .init = dst_init,
+ .tune = dst_tune_frontend,
+ .set_frontend = dst_set_frontend,
+ .get_frontend = dst_get_frontend,
+ .get_frontend_algo = dst_get_tuning_algo,
+ .read_status = dst_read_status,
+ .read_signal_strength = dst_read_signal_strength,
+ .read_snr = dst_read_snr,
+};
+
+MODULE_DESCRIPTION("DST DVB-S/T/C/ATSC Combo Frontend driver");
+MODULE_AUTHOR("Jamie Honan, Manu Abraham");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/pci/bt8xx/dst_ca.c b/drivers/media/pci/bt8xx/dst_ca.c
new file mode 100644
index 000000000000..ee3884fbc9ce
--- /dev/null
+++ b/drivers/media/pci/bt8xx/dst_ca.c
@@ -0,0 +1,726 @@
+/*
+ CA-driver for TwinHan DST Frontend/Card
+
+ Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/string.h>
+#include <linux/dvb/ca.h>
+#include "dvbdev.h"
+#include "dvb_frontend.h"
+#include "dst_ca.h"
+#include "dst_common.h"
+
+#define DST_CA_ERROR 0
+#define DST_CA_NOTICE 1
+#define DST_CA_INFO 2
+#define DST_CA_DEBUG 3
+
+#define dprintk(x, y, z, format, arg...) do { \
+ if (z) { \
+ if ((x > DST_CA_ERROR) && (x > y)) \
+ printk(KERN_ERR "%s: " format "\n", __func__ , ##arg); \
+ else if ((x > DST_CA_NOTICE) && (x > y)) \
+ printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg); \
+ else if ((x > DST_CA_INFO) && (x > y)) \
+ printk(KERN_INFO "%s: " format "\n", __func__ , ##arg); \
+ else if ((x > DST_CA_DEBUG) && (x > y)) \
+ printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg); \
+ } else { \
+ if (x > y) \
+ printk(format, ## arg); \
+ } \
+} while(0)
+
+
+static DEFINE_MUTEX(dst_ca_mutex);
+static unsigned int verbose = 5;
+module_param(verbose, int, 0644);
+MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)");
+
+/* Need some more work */
+static int ca_set_slot_descr(void)
+{
+ /* We could make this more graceful ? */
+ return -EOPNOTSUPP;
+}
+
+/* Need some more work */
+static int ca_set_pid(void)
+{
+ /* We could make this more graceful ? */
+ return -EOPNOTSUPP;
+}
+
+static void put_command_and_length(u8 *data, int command, int length)
+{
+ data[0] = (command >> 16) & 0xff;
+ data[1] = (command >> 8) & 0xff;
+ data[2] = command & 0xff;
+ data[3] = length;
+}
+
+static void put_checksum(u8 *check_string, int length)
+{
+ dprintk(verbose, DST_CA_DEBUG, 1, " Computing string checksum.");
+ dprintk(verbose, DST_CA_DEBUG, 1, " -> string length : 0x%02x", length);
+ check_string[length] = dst_check_sum (check_string, length);
+ dprintk(verbose, DST_CA_DEBUG, 1, " -> checksum : 0x%02x", check_string[length]);
+}
+
+static int dst_ci_command(struct dst_state* state, u8 * data, u8 *ca_string, u8 len, int read)
+{
+ u8 reply;
+
+ mutex_lock(&state->dst_mutex);
+ dst_comm_init(state);
+ msleep(65);
+
+ if (write_dst(state, data, len)) {
+ dprintk(verbose, DST_CA_INFO, 1, " Write not successful, trying to recover");
+ dst_error_recovery(state);
+ goto error;
+ }
+ if ((dst_pio_disable(state)) < 0) {
+ dprintk(verbose, DST_CA_ERROR, 1, " DST PIO disable failed.");
+ goto error;
+ }
+ if (read_dst(state, &reply, GET_ACK) < 0) {
+ dprintk(verbose, DST_CA_INFO, 1, " Read not successful, trying to recover");
+ dst_error_recovery(state);
+ goto error;
+ }
+ if (read) {
+ if (! dst_wait_dst_ready(state, LONG_DELAY)) {
+ dprintk(verbose, DST_CA_NOTICE, 1, " 8820 not ready");
+ goto error;
+ }
+ if (read_dst(state, ca_string, 128) < 0) { /* Try to make this dynamic */
+ dprintk(verbose, DST_CA_INFO, 1, " Read not successful, trying to recover");
+ dst_error_recovery(state);
+ goto error;
+ }
+ }
+ mutex_unlock(&state->dst_mutex);
+ return 0;
+
+error:
+ mutex_unlock(&state->dst_mutex);
+ return -EIO;
+}
+
+
+static int dst_put_ci(struct dst_state *state, u8 *data, int len, u8 *ca_string, int read)
+{
+ u8 dst_ca_comm_err = 0;
+
+ while (dst_ca_comm_err < RETRIES) {
+ dprintk(verbose, DST_CA_NOTICE, 1, " Put Command");
+ if (dst_ci_command(state, data, ca_string, len, read)) { // If error
+ dst_error_recovery(state);
+ dst_ca_comm_err++; // work required here.
+ } else {
+ break;
+ }
+ }
+
+ if(dst_ca_comm_err == RETRIES)
+ return -1;
+
+ return 0;
+}
+
+
+
+static int ca_get_app_info(struct dst_state *state)
+{
+ int length, str_length;
+ static u8 command[8] = {0x07, 0x40, 0x01, 0x00, 0x01, 0x00, 0x00, 0xff};
+
+ put_checksum(&command[0], command[0]);
+ if ((dst_put_ci(state, command, sizeof(command), state->messages, GET_REPLY)) < 0) {
+ dprintk(verbose, DST_CA_ERROR, 1, " -->dst_put_ci FAILED !");
+ return -1;
+ }
+ dprintk(verbose, DST_CA_INFO, 1, " -->dst_put_ci SUCCESS !");
+ dprintk(verbose, DST_CA_INFO, 1, " ================================ CI Module Application Info ======================================");
+ dprintk(verbose, DST_CA_INFO, 1, " Application Type=[%d], Application Vendor=[%d], Vendor Code=[%d]\n%s: Application info=[%s]",
+ state->messages[7], (state->messages[8] << 8) | state->messages[9],
+ (state->messages[10] << 8) | state->messages[11], __func__, (char *)(&state->messages[12]));
+ dprintk(verbose, DST_CA_INFO, 1, " ==================================================================================================");
+
+ // Transform dst message to correct application_info message
+ length = state->messages[5];
+ str_length = length - 6;
+ if (str_length < 0) {
+ str_length = 0;
+ dprintk(verbose, DST_CA_ERROR, 1, "Invalid string length returned in ca_get_app_info(). Recovering.");
+ }
+
+ // First, the command and length fields
+ put_command_and_length(&state->messages[0], CA_APP_INFO, length);
+
+ // Copy application_type, application_manufacturer and manufacturer_code
+ memcpy(&state->messages[4], &state->messages[7], 5);
+
+ // Set string length and copy string
+ state->messages[9] = str_length;
+ memcpy(&state->messages[10], &state->messages[12], str_length);
+
+ return 0;
+}
+
+static int ca_get_ca_info(struct dst_state *state)
+{
+ int srcPtr, dstPtr, i, num_ids;
+ static u8 slot_command[8] = {0x07, 0x40, 0x00, 0x00, 0x02, 0x00, 0x00, 0xff};
+ const int in_system_id_pos = 8, out_system_id_pos = 4, in_num_ids_pos = 7;
+
+ put_checksum(&slot_command[0], slot_command[0]);
+ if ((dst_put_ci(state, slot_command, sizeof (slot_command), state->messages, GET_REPLY)) < 0) {
+ dprintk(verbose, DST_CA_ERROR, 1, " -->dst_put_ci FAILED !");
+ return -1;
+ }
+ dprintk(verbose, DST_CA_INFO, 1, " -->dst_put_ci SUCCESS !");
+
+ // Print raw data
+ dprintk(verbose, DST_CA_INFO, 0, " DST data = [");
+ for (i = 0; i < state->messages[0] + 1; i++) {
+ dprintk(verbose, DST_CA_INFO, 0, " 0x%02x", state->messages[i]);
+ }
+ dprintk(verbose, DST_CA_INFO, 0, "]\n");
+
+ // Set the command and length of the output
+ num_ids = state->messages[in_num_ids_pos];
+ if (num_ids >= 100) {
+ num_ids = 100;
+ dprintk(verbose, DST_CA_ERROR, 1, "Invalid number of ids (>100). Recovering.");
+ }
+ put_command_and_length(&state->messages[0], CA_INFO, num_ids * 2);
+
+ dprintk(verbose, DST_CA_INFO, 0, " CA_INFO = [");
+ srcPtr = in_system_id_pos;
+ dstPtr = out_system_id_pos;
+ for(i = 0; i < num_ids; i++) {
+ dprintk(verbose, DST_CA_INFO, 0, " 0x%02x%02x", state->messages[srcPtr + 0], state->messages[srcPtr + 1]);
+ // Append to output
+ state->messages[dstPtr + 0] = state->messages[srcPtr + 0];
+ state->messages[dstPtr + 1] = state->messages[srcPtr + 1];
+ srcPtr += 2;
+ dstPtr += 2;
+ }
+ dprintk(verbose, DST_CA_INFO, 0, "]\n");
+
+ return 0;
+}
+
+static int ca_get_slot_caps(struct dst_state *state, struct ca_caps *p_ca_caps, void __user *arg)
+{
+ int i;
+ u8 slot_cap[256];
+ static u8 slot_command[8] = {0x07, 0x40, 0x02, 0x00, 0x02, 0x00, 0x00, 0xff};
+
+ put_checksum(&slot_command[0], slot_command[0]);
+ if ((dst_put_ci(state, slot_command, sizeof (slot_command), slot_cap, GET_REPLY)) < 0) {
+ dprintk(verbose, DST_CA_ERROR, 1, " -->dst_put_ci FAILED !");
+ return -1;
+ }
+ dprintk(verbose, DST_CA_NOTICE, 1, " -->dst_put_ci SUCCESS !");
+
+ /* Will implement the rest soon */
+
+ dprintk(verbose, DST_CA_INFO, 1, " Slot cap = [%d]", slot_cap[7]);
+ dprintk(verbose, DST_CA_INFO, 0, "===================================\n");
+ for (i = 0; i < slot_cap[0] + 1; i++)
+ dprintk(verbose, DST_CA_INFO, 0, " %d", slot_cap[i]);
+ dprintk(verbose, DST_CA_INFO, 0, "\n");
+
+ p_ca_caps->slot_num = 1;
+ p_ca_caps->slot_type = 1;
+ p_ca_caps->descr_num = slot_cap[7];
+ p_ca_caps->descr_type = 1;
+
+ if (copy_to_user(arg, p_ca_caps, sizeof (struct ca_caps)))
+ return -EFAULT;
+
+ return 0;
+}
+
+/* Need some more work */
+static int ca_get_slot_descr(struct dst_state *state, struct ca_msg *p_ca_message, void __user *arg)
+{
+ return -EOPNOTSUPP;
+}
+
+
+static int ca_get_slot_info(struct dst_state *state, struct ca_slot_info *p_ca_slot_info, void __user *arg)
+{
+ int i;
+ static u8 slot_command[8] = {0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff};
+
+ u8 *slot_info = state->messages;
+
+ put_checksum(&slot_command[0], 7);
+ if ((dst_put_ci(state, slot_command, sizeof (slot_command), slot_info, GET_REPLY)) < 0) {
+ dprintk(verbose, DST_CA_ERROR, 1, " -->dst_put_ci FAILED !");
+ return -1;
+ }
+ dprintk(verbose, DST_CA_INFO, 1, " -->dst_put_ci SUCCESS !");
+
+ /* Will implement the rest soon */
+
+ dprintk(verbose, DST_CA_INFO, 1, " Slot info = [%d]", slot_info[3]);
+ dprintk(verbose, DST_CA_INFO, 0, "===================================\n");
+ for (i = 0; i < 8; i++)
+ dprintk(verbose, DST_CA_INFO, 0, " %d", slot_info[i]);
+ dprintk(verbose, DST_CA_INFO, 0, "\n");
+
+ if (slot_info[4] & 0x80) {
+ p_ca_slot_info->flags = CA_CI_MODULE_PRESENT;
+ p_ca_slot_info->num = 1;
+ p_ca_slot_info->type = CA_CI;
+ } else if (slot_info[4] & 0x40) {
+ p_ca_slot_info->flags = CA_CI_MODULE_READY;
+ p_ca_slot_info->num = 1;
+ p_ca_slot_info->type = CA_CI;
+ } else
+ p_ca_slot_info->flags = 0;
+
+ if (copy_to_user(arg, p_ca_slot_info, sizeof (struct ca_slot_info)))
+ return -EFAULT;
+
+ return 0;
+}
+
+
+static int ca_get_message(struct dst_state *state, struct ca_msg *p_ca_message, void __user *arg)
+{
+ u8 i = 0;
+ u32 command = 0;
+
+ if (copy_from_user(p_ca_message, arg, sizeof (struct ca_msg)))
+ return -EFAULT;
+
+ if (p_ca_message->msg) {
+ dprintk(verbose, DST_CA_NOTICE, 1, " Message = [%*ph]",
+ 3, p_ca_message->msg);
+
+ for (i = 0; i < 3; i++) {
+ command = command | p_ca_message->msg[i];
+ if (i < 2)
+ command = command << 8;
+ }
+ dprintk(verbose, DST_CA_NOTICE, 1, " Command=[0x%x]", command);
+
+ switch (command) {
+ case CA_APP_INFO:
+ memcpy(p_ca_message->msg, state->messages, 128);
+ if (copy_to_user(arg, p_ca_message, sizeof (struct ca_msg)) )
+ return -EFAULT;
+ break;
+ case CA_INFO:
+ memcpy(p_ca_message->msg, state->messages, 128);
+ if (copy_to_user(arg, p_ca_message, sizeof (struct ca_msg)) )
+ return -EFAULT;
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static int handle_dst_tag(struct dst_state *state, struct ca_msg *p_ca_message, struct ca_msg *hw_buffer, u32 length)
+{
+ if (state->dst_hw_cap & DST_TYPE_HAS_SESSION) {
+ hw_buffer->msg[2] = p_ca_message->msg[1]; /* MSB */
+ hw_buffer->msg[3] = p_ca_message->msg[2]; /* LSB */
+ } else {
+ if (length > 247) {
+ dprintk(verbose, DST_CA_ERROR, 1, " Message too long ! *** Bailing Out *** !");
+ return -1;
+ }
+ hw_buffer->msg[0] = (length & 0xff) + 7;
+ hw_buffer->msg[1] = 0x40;
+ hw_buffer->msg[2] = 0x03;
+ hw_buffer->msg[3] = 0x00;
+ hw_buffer->msg[4] = 0x03;
+ hw_buffer->msg[5] = length & 0xff;
+ hw_buffer->msg[6] = 0x00;
+
+ /*
+ * Need to compute length for EN50221 section 8.3.2, for the time being
+ * assuming 8.3.2 is not applicable
+ */
+ memcpy(&hw_buffer->msg[7], &p_ca_message->msg[4], length);
+ }
+
+ return 0;
+}
+
+static int write_to_8820(struct dst_state *state, struct ca_msg *hw_buffer, u8 length, u8 reply)
+{
+ if ((dst_put_ci(state, hw_buffer->msg, length, hw_buffer->msg, reply)) < 0) {
+ dprintk(verbose, DST_CA_ERROR, 1, " DST-CI Command failed.");
+ dprintk(verbose, DST_CA_NOTICE, 1, " Resetting DST.");
+ rdc_reset_state(state);
+ return -1;
+ }
+ dprintk(verbose, DST_CA_NOTICE, 1, " DST-CI Command success.");
+
+ return 0;
+}
+
+static u32 asn_1_decode(u8 *asn_1_array)
+{
+ u8 length_field = 0, word_count = 0, count = 0;
+ u32 length = 0;
+
+ length_field = asn_1_array[0];
+ dprintk(verbose, DST_CA_DEBUG, 1, " Length field=[%02x]", length_field);
+ if (length_field < 0x80) {
+ length = length_field & 0x7f;
+ dprintk(verbose, DST_CA_DEBUG, 1, " Length=[%02x]\n", length);
+ } else {
+ word_count = length_field & 0x7f;
+ for (count = 0; count < word_count; count++) {
+ length = length << 8;
+ length += asn_1_array[count + 1];
+ dprintk(verbose, DST_CA_DEBUG, 1, " Length=[%04x]", length);
+ }
+ }
+ return length;
+}
+
+static int debug_string(u8 *msg, u32 length, u32 offset)
+{
+ u32 i;
+
+ dprintk(verbose, DST_CA_DEBUG, 0, " String=[ ");
+ for (i = offset; i < length; i++)
+ dprintk(verbose, DST_CA_DEBUG, 0, "%02x ", msg[i]);
+ dprintk(verbose, DST_CA_DEBUG, 0, "]\n");
+
+ return 0;
+}
+
+
+static int ca_set_pmt(struct dst_state *state, struct ca_msg *p_ca_message, struct ca_msg *hw_buffer, u8 reply, u8 query)
+{
+ u32 length = 0;
+ u8 tag_length = 8;
+
+ length = asn_1_decode(&p_ca_message->msg[3]);
+ dprintk(verbose, DST_CA_DEBUG, 1, " CA Message length=[%d]", length);
+ debug_string(&p_ca_message->msg[4], length, 0); /* length is excluding tag & length */
+
+ memset(hw_buffer->msg, '\0', length);
+ handle_dst_tag(state, p_ca_message, hw_buffer, length);
+ put_checksum(hw_buffer->msg, hw_buffer->msg[0]);
+
+ debug_string(hw_buffer->msg, (length + tag_length), 0); /* tags too */
+ write_to_8820(state, hw_buffer, (length + tag_length), reply);
+
+ return 0;
+}
+
+
+/* Board supports CA PMT reply ? */
+static int dst_check_ca_pmt(struct dst_state *state, struct ca_msg *p_ca_message, struct ca_msg *hw_buffer)
+{
+ int ca_pmt_reply_test = 0;
+
+ /* Do test board */
+ /* Not there yet but soon */
+
+ /* CA PMT Reply capable */
+ if (ca_pmt_reply_test) {
+ if ((ca_set_pmt(state, p_ca_message, hw_buffer, 1, GET_REPLY)) < 0) {
+ dprintk(verbose, DST_CA_ERROR, 1, " ca_set_pmt.. failed !");
+ return -1;
+ }
+
+ /* Process CA PMT Reply */
+ /* will implement soon */
+ dprintk(verbose, DST_CA_ERROR, 1, " Not there yet");
+ }
+ /* CA PMT Reply not capable */
+ if (!ca_pmt_reply_test) {
+ if ((ca_set_pmt(state, p_ca_message, hw_buffer, 0, NO_REPLY)) < 0) {
+ dprintk(verbose, DST_CA_ERROR, 1, " ca_set_pmt.. failed !");
+ return -1;
+ }
+ dprintk(verbose, DST_CA_NOTICE, 1, " ca_set_pmt.. success !");
+ /* put a dummy message */
+
+ }
+ return 0;
+}
+
+static int ca_send_message(struct dst_state *state, struct ca_msg *p_ca_message, void __user *arg)
+{
+ int i = 0;
+
+ u32 command = 0;
+ struct ca_msg *hw_buffer;
+ int result = 0;
+
+ if ((hw_buffer = kmalloc(sizeof (struct ca_msg), GFP_KERNEL)) == NULL) {
+ dprintk(verbose, DST_CA_ERROR, 1, " Memory allocation failure");
+ return -ENOMEM;
+ }
+ dprintk(verbose, DST_CA_DEBUG, 1, " ");
+
+ if (copy_from_user(p_ca_message, arg, sizeof (struct ca_msg))) {
+ result = -EFAULT;
+ goto free_mem_and_exit;
+ }
+
+
+ if (p_ca_message->msg) {
+ /* EN50221 tag */
+ command = 0;
+
+ for (i = 0; i < 3; i++) {
+ command = command | p_ca_message->msg[i];
+ if (i < 2)
+ command = command << 8;
+ }
+ dprintk(verbose, DST_CA_DEBUG, 1, " Command=[0x%x]\n", command);
+
+ switch (command) {
+ case CA_PMT:
+ dprintk(verbose, DST_CA_DEBUG, 1, "Command = SEND_CA_PMT");
+ if ((ca_set_pmt(state, p_ca_message, hw_buffer, 0, 0)) < 0) { // code simplification started
+ dprintk(verbose, DST_CA_ERROR, 1, " -->CA_PMT Failed !");
+ result = -1;
+ goto free_mem_and_exit;
+ }
+ dprintk(verbose, DST_CA_INFO, 1, " -->CA_PMT Success !");
+ break;
+ case CA_PMT_REPLY:
+ dprintk(verbose, DST_CA_INFO, 1, "Command = CA_PMT_REPLY");
+ /* Have to handle the 2 basic types of cards here */
+ if ((dst_check_ca_pmt(state, p_ca_message, hw_buffer)) < 0) {
+ dprintk(verbose, DST_CA_ERROR, 1, " -->CA_PMT_REPLY Failed !");
+ result = -1;
+ goto free_mem_and_exit;
+ }
+ dprintk(verbose, DST_CA_INFO, 1, " -->CA_PMT_REPLY Success !");
+ break;
+ case CA_APP_INFO_ENQUIRY: // only for debugging
+ dprintk(verbose, DST_CA_INFO, 1, " Getting Cam Application information");
+
+ if ((ca_get_app_info(state)) < 0) {
+ dprintk(verbose, DST_CA_ERROR, 1, " -->CA_APP_INFO_ENQUIRY Failed !");
+ result = -1;
+ goto free_mem_and_exit;
+ }
+ dprintk(verbose, DST_CA_INFO, 1, " -->CA_APP_INFO_ENQUIRY Success !");
+ break;
+ case CA_INFO_ENQUIRY:
+ dprintk(verbose, DST_CA_INFO, 1, " Getting CA Information");
+
+ if ((ca_get_ca_info(state)) < 0) {
+ dprintk(verbose, DST_CA_ERROR, 1, " -->CA_INFO_ENQUIRY Failed !");
+ result = -1;
+ goto free_mem_and_exit;
+ }
+ dprintk(verbose, DST_CA_INFO, 1, " -->CA_INFO_ENQUIRY Success !");
+ break;
+ }
+ }
+free_mem_and_exit:
+ kfree (hw_buffer);
+
+ return result;
+}
+
+static long dst_ca_ioctl(struct file *file, unsigned int cmd, unsigned long ioctl_arg)
+{
+ struct dvb_device *dvbdev;
+ struct dst_state *state;
+ struct ca_slot_info *p_ca_slot_info;
+ struct ca_caps *p_ca_caps;
+ struct ca_msg *p_ca_message;
+ void __user *arg = (void __user *)ioctl_arg;
+ int result = 0;
+
+ mutex_lock(&dst_ca_mutex);
+ dvbdev = file->private_data;
+ state = (struct dst_state *)dvbdev->priv;
+ p_ca_message = kmalloc(sizeof (struct ca_msg), GFP_KERNEL);
+ p_ca_slot_info = kmalloc(sizeof (struct ca_slot_info), GFP_KERNEL);
+ p_ca_caps = kmalloc(sizeof (struct ca_caps), GFP_KERNEL);
+ if (!p_ca_message || !p_ca_slot_info || !p_ca_caps) {
+ dprintk(verbose, DST_CA_ERROR, 1, " Memory allocation failure");
+ result = -ENOMEM;
+ goto free_mem_and_exit;
+ }
+
+ /* We have now only the standard ioctl's, the driver is upposed to handle internals. */
+ switch (cmd) {
+ case CA_SEND_MSG:
+ dprintk(verbose, DST_CA_INFO, 1, " Sending message");
+ if ((ca_send_message(state, p_ca_message, arg)) < 0) {
+ dprintk(verbose, DST_CA_ERROR, 1, " -->CA_SEND_MSG Failed !");
+ result = -1;
+ goto free_mem_and_exit;
+ }
+ break;
+ case CA_GET_MSG:
+ dprintk(verbose, DST_CA_INFO, 1, " Getting message");
+ if ((ca_get_message(state, p_ca_message, arg)) < 0) {
+ dprintk(verbose, DST_CA_ERROR, 1, " -->CA_GET_MSG Failed !");
+ result = -1;
+ goto free_mem_and_exit;
+ }
+ dprintk(verbose, DST_CA_INFO, 1, " -->CA_GET_MSG Success !");
+ break;
+ case CA_RESET:
+ dprintk(verbose, DST_CA_ERROR, 1, " Resetting DST");
+ dst_error_bailout(state);
+ msleep(4000);
+ break;
+ case CA_GET_SLOT_INFO:
+ dprintk(verbose, DST_CA_INFO, 1, " Getting Slot info");
+ if ((ca_get_slot_info(state, p_ca_slot_info, arg)) < 0) {
+ dprintk(verbose, DST_CA_ERROR, 1, " -->CA_GET_SLOT_INFO Failed !");
+ result = -1;
+ goto free_mem_and_exit;
+ }
+ dprintk(verbose, DST_CA_INFO, 1, " -->CA_GET_SLOT_INFO Success !");
+ break;
+ case CA_GET_CAP:
+ dprintk(verbose, DST_CA_INFO, 1, " Getting Slot capabilities");
+ if ((ca_get_slot_caps(state, p_ca_caps, arg)) < 0) {
+ dprintk(verbose, DST_CA_ERROR, 1, " -->CA_GET_CAP Failed !");
+ result = -1;
+ goto free_mem_and_exit;
+ }
+ dprintk(verbose, DST_CA_INFO, 1, " -->CA_GET_CAP Success !");
+ break;
+ case CA_GET_DESCR_INFO:
+ dprintk(verbose, DST_CA_INFO, 1, " Getting descrambler description");
+ if ((ca_get_slot_descr(state, p_ca_message, arg)) < 0) {
+ dprintk(verbose, DST_CA_ERROR, 1, " -->CA_GET_DESCR_INFO Failed !");
+ result = -1;
+ goto free_mem_and_exit;
+ }
+ dprintk(verbose, DST_CA_INFO, 1, " -->CA_GET_DESCR_INFO Success !");
+ break;
+ case CA_SET_DESCR:
+ dprintk(verbose, DST_CA_INFO, 1, " Setting descrambler");
+ if ((ca_set_slot_descr()) < 0) {
+ dprintk(verbose, DST_CA_ERROR, 1, " -->CA_SET_DESCR Failed !");
+ result = -1;
+ goto free_mem_and_exit;
+ }
+ dprintk(verbose, DST_CA_INFO, 1, " -->CA_SET_DESCR Success !");
+ break;
+ case CA_SET_PID:
+ dprintk(verbose, DST_CA_INFO, 1, " Setting PID");
+ if ((ca_set_pid()) < 0) {
+ dprintk(verbose, DST_CA_ERROR, 1, " -->CA_SET_PID Failed !");
+ result = -1;
+ goto free_mem_and_exit;
+ }
+ dprintk(verbose, DST_CA_INFO, 1, " -->CA_SET_PID Success !");
+ default:
+ result = -EOPNOTSUPP;
+ };
+ free_mem_and_exit:
+ kfree (p_ca_message);
+ kfree (p_ca_slot_info);
+ kfree (p_ca_caps);
+
+ mutex_unlock(&dst_ca_mutex);
+ return result;
+}
+
+static int dst_ca_open(struct inode *inode, struct file *file)
+{
+ dprintk(verbose, DST_CA_DEBUG, 1, " Device opened [%p] ", file);
+ try_module_get(THIS_MODULE);
+
+ return 0;
+}
+
+static int dst_ca_release(struct inode *inode, struct file *file)
+{
+ dprintk(verbose, DST_CA_DEBUG, 1, " Device closed.");
+ module_put(THIS_MODULE);
+
+ return 0;
+}
+
+static ssize_t dst_ca_read(struct file *file, char __user *buffer, size_t length, loff_t *offset)
+{
+ ssize_t bytes_read = 0;
+
+ dprintk(verbose, DST_CA_DEBUG, 1, " Device read.");
+
+ return bytes_read;
+}
+
+static ssize_t dst_ca_write(struct file *file, const char __user *buffer, size_t length, loff_t *offset)
+{
+ dprintk(verbose, DST_CA_DEBUG, 1, " Device write.");
+
+ return 0;
+}
+
+static const struct file_operations dst_ca_fops = {
+ .owner = THIS_MODULE,
+ .unlocked_ioctl = dst_ca_ioctl,
+ .open = dst_ca_open,
+ .release = dst_ca_release,
+ .read = dst_ca_read,
+ .write = dst_ca_write,
+ .llseek = noop_llseek,
+};
+
+static struct dvb_device dvbdev_ca = {
+ .priv = NULL,
+ .users = 1,
+ .readers = 1,
+ .writers = 1,
+ .fops = &dst_ca_fops
+};
+
+struct dvb_device *dst_ca_attach(struct dst_state *dst, struct dvb_adapter *dvb_adapter)
+{
+ struct dvb_device *dvbdev;
+
+ dprintk(verbose, DST_CA_ERROR, 1, "registering DST-CA device");
+ if (dvb_register_device(dvb_adapter, &dvbdev, &dvbdev_ca, dst, DVB_DEVICE_CA) == 0) {
+ dst->dst_ca = dvbdev;
+ return dst->dst_ca;
+ }
+
+ return NULL;
+}
+
+EXPORT_SYMBOL(dst_ca_attach);
+
+MODULE_DESCRIPTION("DST DVB-S/T/C Combo CA driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/pci/bt8xx/dst_ca.h b/drivers/media/pci/bt8xx/dst_ca.h
new file mode 100644
index 000000000000..59cd0ddd6d8e
--- /dev/null
+++ b/drivers/media/pci/bt8xx/dst_ca.h
@@ -0,0 +1,58 @@
+/*
+ CA-driver for TwinHan DST Frontend/Card
+
+ Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _DST_CA_H_
+#define _DST_CA_H_
+
+#define RETRIES 5
+
+
+#define CA_APP_INFO_ENQUIRY 0x9f8020
+#define CA_APP_INFO 0x9f8021
+#define CA_ENTER_MENU 0x9f8022
+#define CA_INFO_ENQUIRY 0x9f8030
+#define CA_INFO 0x9f8031
+#define CA_PMT 0x9f8032
+#define CA_PMT_REPLY 0x9f8033
+
+#define CA_CLOSE_MMI 0x9f8800
+#define CA_DISPLAY_CONTROL 0x9f8801
+#define CA_DISPLAY_REPLY 0x9f8802
+#define CA_TEXT_LAST 0x9f8803
+#define CA_TEXT_MORE 0x9f8804
+#define CA_KEYPAD_CONTROL 0x9f8805
+#define CA_KEYPRESS 0x9f8806
+
+#define CA_ENQUIRY 0x9f8807
+#define CA_ANSWER 0x9f8808
+#define CA_MENU_LAST 0x9f8809
+#define CA_MENU_MORE 0x9f880a
+#define CA_MENU_ANSWER 0x9f880b
+#define CA_LIST_LAST 0x9f880c
+#define CA_LIST_MORE 0x9f880d
+
+
+struct dst_ca_private {
+ struct dst_state *dst;
+ struct dvb_device *dvbdev;
+};
+
+
+#endif
diff --git a/drivers/media/pci/bt8xx/dst_common.h b/drivers/media/pci/bt8xx/dst_common.h
new file mode 100644
index 000000000000..d70d98f1a571
--- /dev/null
+++ b/drivers/media/pci/bt8xx/dst_common.h
@@ -0,0 +1,182 @@
+/*
+ Frontend-driver for TwinHan DST Frontend
+
+ Copyright (C) 2003 Jamie Honan
+ Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef DST_COMMON_H
+#define DST_COMMON_H
+
+#include <linux/dvb/frontend.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include "bt878.h"
+
+#include "dst_ca.h"
+
+
+#define NO_DELAY 0
+#define LONG_DELAY 1
+#define DEVICE_INIT 2
+
+#define DELAY 1
+
+#define DST_TYPE_IS_SAT 0
+#define DST_TYPE_IS_TERR 1
+#define DST_TYPE_IS_CABLE 2
+#define DST_TYPE_IS_ATSC 3
+
+#define DST_TYPE_HAS_TS188 1
+#define DST_TYPE_HAS_TS204 2
+#define DST_TYPE_HAS_SYMDIV 4
+#define DST_TYPE_HAS_FW_1 8
+#define DST_TYPE_HAS_FW_2 16
+#define DST_TYPE_HAS_FW_3 32
+#define DST_TYPE_HAS_FW_BUILD 64
+#define DST_TYPE_HAS_OBS_REGS 128
+#define DST_TYPE_HAS_INC_COUNT 256
+#define DST_TYPE_HAS_MULTI_FE 512
+#define DST_TYPE_HAS_NEWTUNE_2 1024
+#define DST_TYPE_HAS_DBOARD 2048
+#define DST_TYPE_HAS_VLF 4096
+
+/* Card capability list */
+
+#define DST_TYPE_HAS_MAC 1
+#define DST_TYPE_HAS_DISEQC3 2
+#define DST_TYPE_HAS_DISEQC4 4
+#define DST_TYPE_HAS_DISEQC5 8
+#define DST_TYPE_HAS_MOTO 16
+#define DST_TYPE_HAS_CA 32
+#define DST_TYPE_HAS_ANALOG 64 /* Analog inputs */
+#define DST_TYPE_HAS_SESSION 128
+
+#define TUNER_TYPE_MULTI 1
+#define TUNER_TYPE_UNKNOWN 2
+/* DVB-S */
+#define TUNER_TYPE_L64724 4
+#define TUNER_TYPE_STV0299 8
+#define TUNER_TYPE_MB86A15 16
+
+/* DVB-T */
+#define TUNER_TYPE_TDA10046 32
+
+/* ATSC */
+#define TUNER_TYPE_NXT200x 64
+
+
+#define RDC_8820_PIO_0_DISABLE 0
+#define RDC_8820_PIO_0_ENABLE 1
+#define RDC_8820_INT 2
+#define RDC_8820_RESET 4
+
+/* DST Communication */
+#define GET_REPLY 1
+#define NO_REPLY 0
+
+#define GET_ACK 1
+#define FIXED_COMM 8
+
+#define ACK 0xff
+
+struct dst_state {
+
+ struct i2c_adapter* i2c;
+
+ struct bt878* bt;
+
+ /* configuration settings */
+ const struct dst_config* config;
+
+ struct dvb_frontend frontend;
+
+ /* private ASIC data */
+ u8 tx_tuna[10];
+ u8 rx_tuna[10];
+ u8 rxbuffer[10];
+ u8 diseq_flags;
+ u8 dst_type;
+ u32 type_flags;
+ u32 frequency; /* intermediate frequency in kHz for QPSK */
+ fe_spectral_inversion_t inversion;
+ u32 symbol_rate; /* symbol rate in Symbols per second */
+ fe_code_rate_t fec;
+ fe_sec_voltage_t voltage;
+ fe_sec_tone_mode_t tone;
+ u32 decode_freq;
+ u8 decode_lock;
+ u16 decode_strength;
+ u16 decode_snr;
+ unsigned long cur_jiff;
+ u8 k22;
+ u32 bandwidth;
+ u32 dst_hw_cap;
+ u8 dst_fw_version;
+ fe_sec_mini_cmd_t minicmd;
+ fe_modulation_t modulation;
+ u8 messages[256];
+ u8 mac_address[8];
+ u8 fw_version[8];
+ u8 card_info[8];
+ u8 vendor[8];
+ u8 board_info[8];
+ u32 tuner_type;
+ char *tuner_name;
+ struct mutex dst_mutex;
+ u8 fw_name[8];
+ struct dvb_device *dst_ca;
+};
+
+struct tuner_types {
+ u32 tuner_type;
+ char *tuner_name;
+ char *board_name;
+ char *fw_name;
+};
+
+struct dst_types {
+ char *device_id;
+ int offset;
+ u8 dst_type;
+ u32 type_flags;
+ u32 dst_feature;
+ u32 tuner_type;
+};
+
+struct dst_config
+{
+ /* the ASIC i2c address */
+ u8 demod_address;
+};
+
+int rdc_reset_state(struct dst_state *state);
+
+int dst_wait_dst_ready(struct dst_state *state, u8 delay_mode);
+int dst_pio_disable(struct dst_state *state);
+int dst_error_recovery(struct dst_state* state);
+int dst_error_bailout(struct dst_state *state);
+int dst_comm_init(struct dst_state* state);
+
+int write_dst(struct dst_state *state, u8 * data, u8 len);
+int read_dst(struct dst_state *state, u8 * ret, u8 len);
+u8 dst_check_sum(u8 * buf, u32 len);
+struct dst_state* dst_attach(struct dst_state* state, struct dvb_adapter *dvb_adapter);
+struct dvb_device *dst_ca_attach(struct dst_state *state, struct dvb_adapter *dvb_adapter);
+
+
+#endif // DST_COMMON_H
diff --git a/drivers/media/pci/bt8xx/dst_priv.h b/drivers/media/pci/bt8xx/dst_priv.h
new file mode 100644
index 000000000000..3974a4c6ebe7
--- /dev/null
+++ b/drivers/media/pci/bt8xx/dst_priv.h
@@ -0,0 +1,35 @@
+/*
+ * dst-bt878.h: part of the DST driver for the TwinHan DST Frontend
+ *
+ * Copyright (C) 2003 Jamie Honan
+ */
+
+struct dst_gpio_enable {
+ u32 mask;
+ u32 enable;
+};
+
+struct dst_gpio_output {
+ u32 mask;
+ u32 highvals;
+};
+
+struct dst_gpio_read {
+ unsigned long value;
+};
+
+union dst_gpio_packet {
+ struct dst_gpio_enable enb;
+ struct dst_gpio_output outp;
+ struct dst_gpio_read rd;
+ int psize;
+};
+
+#define DST_IG_ENABLE 0
+#define DST_IG_WRITE 1
+#define DST_IG_READ 2
+#define DST_IG_TS 3
+
+struct bt878;
+
+int bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet *mp);
diff --git a/drivers/media/pci/bt8xx/dvb-bt8xx.c b/drivers/media/pci/bt8xx/dvb-bt8xx.c
new file mode 100644
index 000000000000..81fab9adc1ca
--- /dev/null
+++ b/drivers/media/pci/bt8xx/dvb-bt8xx.c
@@ -0,0 +1,975 @@
+/*
+ * Bt8xx based DVB adapter driver
+ *
+ * Copyright (C) 2002,2003 Florian Schirmer <jolt@tuxbox.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#define pr_fmt(fmt) "dvb_bt8xx: " fmt
+
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb-bt8xx.h"
+#include "bt878.h"
+
+static int debug;
+
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+#define dprintk( args... ) \
+ do { \
+ if (debug) printk(KERN_DEBUG args); \
+ } while (0)
+
+#define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
+
+static void dvb_bt8xx_task(unsigned long data)
+{
+ struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *)data;
+
+ //printk("%d ", card->bt->finished_block);
+
+ while (card->bt->last_block != card->bt->finished_block) {
+ (card->bt->TS_Size ? dvb_dmx_swfilter_204 : dvb_dmx_swfilter)
+ (&card->demux,
+ &card->bt->buf_cpu[card->bt->last_block *
+ card->bt->block_bytes],
+ card->bt->block_bytes);
+ card->bt->last_block = (card->bt->last_block + 1) %
+ card->bt->block_count;
+ }
+}
+
+static int dvb_bt8xx_start_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct dvb_demux*dvbdmx = dvbdmxfeed->demux;
+ struct dvb_bt8xx_card *card = dvbdmx->priv;
+ int rc;
+
+ dprintk("dvb_bt8xx: start_feed\n");
+
+ if (!dvbdmx->dmx.frontend)
+ return -EINVAL;
+
+ mutex_lock(&card->lock);
+ card->nfeeds++;
+ rc = card->nfeeds;
+ if (card->nfeeds == 1)
+ bt878_start(card->bt, card->gpio_mode,
+ card->op_sync_orin, card->irq_err_ignore);
+ mutex_unlock(&card->lock);
+ return rc;
+}
+
+static int dvb_bt8xx_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
+ struct dvb_bt8xx_card *card = dvbdmx->priv;
+
+ dprintk("dvb_bt8xx: stop_feed\n");
+
+ if (!dvbdmx->dmx.frontend)
+ return -EINVAL;
+
+ mutex_lock(&card->lock);
+ card->nfeeds--;
+ if (card->nfeeds == 0)
+ bt878_stop(card->bt);
+ mutex_unlock(&card->lock);
+
+ return 0;
+}
+
+static int is_pci_slot_eq(struct pci_dev* adev, struct pci_dev* bdev)
+{
+ if ((adev->subsystem_vendor == bdev->subsystem_vendor) &&
+ (adev->subsystem_device == bdev->subsystem_device) &&
+ (adev->bus->number == bdev->bus->number) &&
+ (PCI_SLOT(adev->devfn) == PCI_SLOT(bdev->devfn)))
+ return 1;
+ return 0;
+}
+
+static struct bt878 __devinit *dvb_bt8xx_878_match(unsigned int bttv_nr, struct pci_dev* bttv_pci_dev)
+{
+ unsigned int card_nr;
+
+ /* Hmm, n squared. Hope n is small */
+ for (card_nr = 0; card_nr < bt878_num; card_nr++)
+ if (is_pci_slot_eq(bt878[card_nr].dev, bttv_pci_dev))
+ return &bt878[card_nr];
+ return NULL;
+}
+
+static int thomson_dtt7579_demod_init(struct dvb_frontend* fe)
+{
+ static u8 mt352_clock_config [] = { 0x89, 0x38, 0x38 };
+ static u8 mt352_reset [] = { 0x50, 0x80 };
+ static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
+ static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0x20 };
+ static u8 mt352_gpp_ctl_cfg [] = { 0x8C, 0x33 };
+ static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
+
+ mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
+ udelay(2000);
+ mt352_write(fe, mt352_reset, sizeof(mt352_reset));
+ mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
+
+ mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
+ mt352_write(fe, mt352_gpp_ctl_cfg, sizeof(mt352_gpp_ctl_cfg));
+ mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
+
+ return 0;
+}
+
+static int thomson_dtt7579_tuner_calc_regs(struct dvb_frontend *fe, u8* pllbuf, int buf_len)
+{
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ u32 div;
+ unsigned char bs = 0;
+ unsigned char cp = 0;
+
+ if (buf_len < 5)
+ return -EINVAL;
+
+ div = (((c->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
+
+ if (c->frequency < 542000000)
+ cp = 0xb4;
+ else if (c->frequency < 771000000)
+ cp = 0xbc;
+ else
+ cp = 0xf4;
+
+ if (c->frequency == 0)
+ bs = 0x03;
+ else if (c->frequency < 443250000)
+ bs = 0x02;
+ else
+ bs = 0x08;
+
+ pllbuf[0] = 0x60;
+ pllbuf[1] = div >> 8;
+ pllbuf[2] = div & 0xff;
+ pllbuf[3] = cp;
+ pllbuf[4] = bs;
+
+ return 5;
+}
+
+static struct mt352_config thomson_dtt7579_config = {
+ .demod_address = 0x0f,
+ .demod_init = thomson_dtt7579_demod_init,
+};
+
+static struct zl10353_config thomson_dtt7579_zl10353_config = {
+ .demod_address = 0x0f,
+};
+
+static int cx24108_tuner_set_params(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ u32 freq = c->frequency;
+ int i, a, n, pump;
+ u32 band, pll;
+ u32 osci[]={950000,1019000,1075000,1178000,1296000,1432000,
+ 1576000,1718000,1856000,2036000,2150000};
+ u32 bandsel[]={0,0x00020000,0x00040000,0x00100800,0x00101000,
+ 0x00102000,0x00104000,0x00108000,0x00110000,
+ 0x00120000,0x00140000};
+
+ #define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */
+ dprintk("cx24108 debug: entering SetTunerFreq, freq=%d\n", freq);
+
+ /* This is really the bit driving the tuner chip cx24108 */
+
+ if (freq<950000)
+ freq = 950000; /* kHz */
+ else if (freq>2150000)
+ freq = 2150000; /* satellite IF is 950..2150MHz */
+
+ /* decide which VCO to use for the input frequency */
+ for(i = 1; (i < ARRAY_SIZE(osci) - 1) && (osci[i] < freq); i++);
+ dprintk("cx24108 debug: select vco #%d (f=%d)\n", i, freq);
+ band=bandsel[i];
+ /* the gain values must be set by SetSymbolrate */
+ /* compute the pll divider needed, from Conexant data sheet,
+ resolved for (n*32+a), remember f(vco) is f(receive) *2 or *4,
+ depending on the divider bit. It is set to /4 on the 2 lowest
+ bands */
+ n=((i<=2?2:1)*freq*10L)/(XTAL/100);
+ a=n%32; n/=32; if(a==0) n--;
+ pump=(freq<(osci[i-1]+osci[i])/2);
+ pll=0xf8000000|
+ ((pump?1:2)<<(14+11))|
+ ((n&0x1ff)<<(5+11))|
+ ((a&0x1f)<<11);
+ /* everything is shifted left 11 bits to left-align the bits in the
+ 32bit word. Output to the tuner goes MSB-aligned, after all */
+ dprintk("cx24108 debug: pump=%d, n=%d, a=%d\n", pump, n, a);
+ cx24110_pll_write(fe,band);
+ /* set vga and vca to their widest-band settings, as a precaution.
+ SetSymbolrate might not be called to set this up */
+ cx24110_pll_write(fe,0x500c0000);
+ cx24110_pll_write(fe,0x83f1f800);
+ cx24110_pll_write(fe,pll);
+ //writereg(client,0x56,0x7f);
+
+ return 0;
+}
+
+static int pinnsat_tuner_init(struct dvb_frontend* fe)
+{
+ struct dvb_bt8xx_card *card = fe->dvb->priv;
+
+ bttv_gpio_enable(card->bttv_nr, 1, 1); /* output */
+ bttv_write_gpio(card->bttv_nr, 1, 1); /* relay on */
+
+ return 0;
+}
+
+static int pinnsat_tuner_sleep(struct dvb_frontend* fe)
+{
+ struct dvb_bt8xx_card *card = fe->dvb->priv;
+
+ bttv_write_gpio(card->bttv_nr, 1, 0); /* relay off */
+
+ return 0;
+}
+
+static struct cx24110_config pctvsat_config = {
+ .demod_address = 0x55,
+};
+
+static int microtune_mt7202dtf_tuner_set_params(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *) fe->dvb->priv;
+ u8 cfg, cpump, band_select;
+ u8 data[4];
+ u32 div;
+ struct i2c_msg msg = { .addr = 0x60, .flags = 0, .buf = data, .len = sizeof(data) };
+
+ div = (36000000 + c->frequency + 83333) / 166666;
+ cfg = 0x88;
+
+ if (c->frequency < 175000000)
+ cpump = 2;
+ else if (c->frequency < 390000000)
+ cpump = 1;
+ else if (c->frequency < 470000000)
+ cpump = 2;
+ else if (c->frequency < 750000000)
+ cpump = 2;
+ else
+ cpump = 3;
+
+ if (c->frequency < 175000000)
+ band_select = 0x0e;
+ else if (c->frequency < 470000000)
+ band_select = 0x05;
+ else
+ band_select = 0x03;
+
+ data[0] = (div >> 8) & 0x7f;
+ data[1] = div & 0xff;
+ data[2] = ((div >> 10) & 0x60) | cfg;
+ data[3] = (cpump << 6) | band_select;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ i2c_transfer(card->i2c_adapter, &msg, 1);
+ return (div * 166666 - 36000000);
+}
+
+static int microtune_mt7202dtf_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
+{
+ struct dvb_bt8xx_card* bt = (struct dvb_bt8xx_card*) fe->dvb->priv;
+
+ return request_firmware(fw, name, &bt->bt->dev->dev);
+}
+
+static struct sp887x_config microtune_mt7202dtf_config = {
+ .demod_address = 0x70,
+ .request_firmware = microtune_mt7202dtf_request_firmware,
+};
+
+static int advbt771_samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
+{
+ static u8 mt352_clock_config [] = { 0x89, 0x38, 0x2d };
+ static u8 mt352_reset [] = { 0x50, 0x80 };
+ static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
+ static u8 mt352_agc_cfg [] = { 0x67, 0x10, 0x23, 0x00, 0xFF, 0xFF,
+ 0x00, 0xFF, 0x00, 0x40, 0x40 };
+ static u8 mt352_av771_extra[] = { 0xB5, 0x7A };
+ static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
+
+ mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
+ udelay(2000);
+ mt352_write(fe, mt352_reset, sizeof(mt352_reset));
+ mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
+
+ mt352_write(fe, mt352_agc_cfg,sizeof(mt352_agc_cfg));
+ udelay(2000);
+ mt352_write(fe, mt352_av771_extra,sizeof(mt352_av771_extra));
+ mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
+
+ return 0;
+}
+
+static int advbt771_samsung_tdtc9251dh0_tuner_calc_regs(struct dvb_frontend *fe, u8 *pllbuf, int buf_len)
+{
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ u32 div;
+ unsigned char bs = 0;
+ unsigned char cp = 0;
+
+ if (buf_len < 5) return -EINVAL;
+
+ div = (((c->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
+
+ if (c->frequency < 150000000)
+ cp = 0xB4;
+ else if (c->frequency < 173000000)
+ cp = 0xBC;
+ else if (c->frequency < 250000000)
+ cp = 0xB4;
+ else if (c->frequency < 400000000)
+ cp = 0xBC;
+ else if (c->frequency < 420000000)
+ cp = 0xF4;
+ else if (c->frequency < 470000000)
+ cp = 0xFC;
+ else if (c->frequency < 600000000)
+ cp = 0xBC;
+ else if (c->frequency < 730000000)
+ cp = 0xF4;
+ else
+ cp = 0xFC;
+
+ if (c->frequency < 150000000)
+ bs = 0x01;
+ else if (c->frequency < 173000000)
+ bs = 0x01;
+ else if (c->frequency < 250000000)
+ bs = 0x02;
+ else if (c->frequency < 400000000)
+ bs = 0x02;
+ else if (c->frequency < 420000000)
+ bs = 0x02;
+ else if (c->frequency < 470000000)
+ bs = 0x02;
+ else if (c->frequency < 600000000)
+ bs = 0x08;
+ else if (c->frequency < 730000000)
+ bs = 0x08;
+ else
+ bs = 0x08;
+
+ pllbuf[0] = 0x61;
+ pllbuf[1] = div >> 8;
+ pllbuf[2] = div & 0xff;
+ pllbuf[3] = cp;
+ pllbuf[4] = bs;
+
+ return 5;
+}
+
+static struct mt352_config advbt771_samsung_tdtc9251dh0_config = {
+ .demod_address = 0x0f,
+ .demod_init = advbt771_samsung_tdtc9251dh0_demod_init,
+};
+
+static struct dst_config dst_config = {
+ .demod_address = 0x55,
+};
+
+static int or51211_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
+{
+ struct dvb_bt8xx_card* bt = (struct dvb_bt8xx_card*) fe->dvb->priv;
+
+ return request_firmware(fw, name, &bt->bt->dev->dev);
+}
+
+static void or51211_setmode(struct dvb_frontend * fe, int mode)
+{
+ struct dvb_bt8xx_card *bt = fe->dvb->priv;
+ bttv_write_gpio(bt->bttv_nr, 0x0002, mode); /* Reset */
+ msleep(20);
+}
+
+static void or51211_reset(struct dvb_frontend * fe)
+{
+ struct dvb_bt8xx_card *bt = fe->dvb->priv;
+
+ /* RESET DEVICE
+ * reset is controlled by GPIO-0
+ * when set to 0 causes reset and when to 1 for normal op
+ * must remain reset for 128 clock cycles on a 50Mhz clock
+ * also PRM1 PRM2 & PRM4 are controlled by GPIO-1,GPIO-2 & GPIO-4
+ * We assume that the reset has be held low long enough or we
+ * have been reset by a power on. When the driver is unloaded
+ * reset set to 0 so if reloaded we have been reset.
+ */
+ /* reset & PRM1,2&4 are outputs */
+ int ret = bttv_gpio_enable(bt->bttv_nr, 0x001F, 0x001F);
+ if (ret != 0)
+ printk(KERN_WARNING "or51211: Init Error - Can't Reset DVR (%i)\n", ret);
+ bttv_write_gpio(bt->bttv_nr, 0x001F, 0x0000); /* Reset */
+ msleep(20);
+ /* Now set for normal operation */
+ bttv_write_gpio(bt->bttv_nr, 0x0001F, 0x0001);
+ /* wait for operation to begin */
+ msleep(500);
+}
+
+static void or51211_sleep(struct dvb_frontend * fe)
+{
+ struct dvb_bt8xx_card *bt = fe->dvb->priv;
+ bttv_write_gpio(bt->bttv_nr, 0x0001, 0x0000);
+}
+
+static struct or51211_config or51211_config = {
+ .demod_address = 0x15,
+ .request_firmware = or51211_request_firmware,
+ .setmode = or51211_setmode,
+ .reset = or51211_reset,
+ .sleep = or51211_sleep,
+};
+
+static int vp3021_alps_tded4_tuner_set_params(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *) fe->dvb->priv;
+ u8 buf[4];
+ u32 div;
+ struct i2c_msg msg = { .addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf) };
+
+ div = (c->frequency + 36166667) / 166667;
+
+ buf[0] = (div >> 8) & 0x7F;
+ buf[1] = div & 0xFF;
+ buf[2] = 0x85;
+ if ((c->frequency >= 47000000) && (c->frequency < 153000000))
+ buf[3] = 0x01;
+ else if ((c->frequency >= 153000000) && (c->frequency < 430000000))
+ buf[3] = 0x02;
+ else if ((c->frequency >= 430000000) && (c->frequency < 824000000))
+ buf[3] = 0x0C;
+ else if ((c->frequency >= 824000000) && (c->frequency < 863000000))
+ buf[3] = 0x8C;
+ else
+ return -EINVAL;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ i2c_transfer(card->i2c_adapter, &msg, 1);
+ return 0;
+}
+
+static struct nxt6000_config vp3021_alps_tded4_config = {
+ .demod_address = 0x0a,
+ .clock_inversion = 1,
+};
+
+static int digitv_alps_tded4_demod_init(struct dvb_frontend* fe)
+{
+ static u8 mt352_clock_config [] = { 0x89, 0x38, 0x2d };
+ static u8 mt352_reset [] = { 0x50, 0x80 };
+ static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
+ static u8 mt352_agc_cfg [] = { 0x67, 0x20, 0xa0 };
+ static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
+
+ mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
+ udelay(2000);
+ mt352_write(fe, mt352_reset, sizeof(mt352_reset));
+ mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
+ mt352_write(fe, mt352_agc_cfg,sizeof(mt352_agc_cfg));
+ mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
+
+ return 0;
+}
+
+static int digitv_alps_tded4_tuner_calc_regs(struct dvb_frontend *fe, u8 *pllbuf, int buf_len)
+{
+ u32 div;
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+
+ if (buf_len < 5)
+ return -EINVAL;
+
+ div = (((c->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
+
+ pllbuf[0] = 0x61;
+ pllbuf[1] = (div >> 8) & 0x7F;
+ pllbuf[2] = div & 0xFF;
+ pllbuf[3] = 0x85;
+
+ dprintk("frequency %u, div %u\n", c->frequency, div);
+
+ if (c->frequency < 470000000)
+ pllbuf[4] = 0x02;
+ else if (c->frequency > 823000000)
+ pllbuf[4] = 0x88;
+ else
+ pllbuf[4] = 0x08;
+
+ if (c->bandwidth_hz == 8000000)
+ pllbuf[4] |= 0x04;
+
+ return 5;
+}
+
+static void digitv_alps_tded4_reset(struct dvb_bt8xx_card *bt)
+{
+ /*
+ * Reset the frontend, must be called before trying
+ * to initialise the MT352 or mt352_attach
+ * will fail. Same goes for the nxt6000 frontend.
+ *
+ */
+
+ int ret = bttv_gpio_enable(bt->bttv_nr, 0x08, 0x08);
+ if (ret != 0)
+ printk(KERN_WARNING "digitv_alps_tded4: Init Error - Can't Reset DVR (%i)\n", ret);
+
+ /* Pulse the reset line */
+ bttv_write_gpio(bt->bttv_nr, 0x08, 0x08); /* High */
+ bttv_write_gpio(bt->bttv_nr, 0x08, 0x00); /* Low */
+ msleep(100);
+
+ bttv_write_gpio(bt->bttv_nr, 0x08, 0x08); /* High */
+}
+
+static struct mt352_config digitv_alps_tded4_config = {
+ .demod_address = 0x0a,
+ .demod_init = digitv_alps_tded4_demod_init,
+};
+
+static struct lgdt330x_config tdvs_tua6034_config = {
+ .demod_address = 0x0e,
+ .demod_chip = LGDT3303,
+ .serial_mpeg = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */
+};
+
+static void lgdt330x_reset(struct dvb_bt8xx_card *bt)
+{
+ /* Set pin 27 of the lgdt3303 chip high to reset the frontend */
+
+ /* Pulse the reset line */
+ bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000001); /* High */
+ bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000000); /* Low */
+ msleep(100);
+
+ bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000001); /* High */
+ msleep(100);
+}
+
+static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
+{
+ struct dst_state* state = NULL;
+
+ switch(type) {
+ case BTTV_BOARD_DVICO_DVBT_LITE:
+ card->fe = dvb_attach(mt352_attach, &thomson_dtt7579_config, card->i2c_adapter);
+
+ if (card->fe == NULL)
+ card->fe = dvb_attach(zl10353_attach, &thomson_dtt7579_zl10353_config,
+ card->i2c_adapter);
+
+ if (card->fe != NULL) {
+ card->fe->ops.tuner_ops.calc_regs = thomson_dtt7579_tuner_calc_regs;
+ card->fe->ops.info.frequency_min = 174000000;
+ card->fe->ops.info.frequency_max = 862000000;
+ }
+ break;
+
+ case BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE:
+ lgdt330x_reset(card);
+ card->fe = dvb_attach(lgdt330x_attach, &tdvs_tua6034_config, card->i2c_adapter);
+ if (card->fe != NULL) {
+ dvb_attach(simple_tuner_attach, card->fe,
+ card->i2c_adapter, 0x61,
+ TUNER_LG_TDVS_H06XF);
+ dprintk ("dvb_bt8xx: lgdt330x detected\n");
+ }
+ break;
+
+ case BTTV_BOARD_NEBULA_DIGITV:
+ /*
+ * It is possible to determine the correct frontend using the I2C bus (see the Nebula SDK);
+ * this would be a cleaner solution than trying each frontend in turn.
+ */
+
+ /* Old Nebula (marked (c)2003 on high profile pci card) has nxt6000 demod */
+ digitv_alps_tded4_reset(card);
+ card->fe = dvb_attach(nxt6000_attach, &vp3021_alps_tded4_config, card->i2c_adapter);
+ if (card->fe != NULL) {
+ card->fe->ops.tuner_ops.set_params = vp3021_alps_tded4_tuner_set_params;
+ dprintk ("dvb_bt8xx: an nxt6000 was detected on your digitv card\n");
+ break;
+ }
+
+ /* New Nebula (marked (c)2005 on low profile pci card) has mt352 demod */
+ digitv_alps_tded4_reset(card);
+ card->fe = dvb_attach(mt352_attach, &digitv_alps_tded4_config, card->i2c_adapter);
+
+ if (card->fe != NULL) {
+ card->fe->ops.tuner_ops.calc_regs = digitv_alps_tded4_tuner_calc_regs;
+ dprintk ("dvb_bt8xx: an mt352 was detected on your digitv card\n");
+ }
+ break;
+
+ case BTTV_BOARD_AVDVBT_761:
+ card->fe = dvb_attach(sp887x_attach, &microtune_mt7202dtf_config, card->i2c_adapter);
+ if (card->fe) {
+ card->fe->ops.tuner_ops.set_params = microtune_mt7202dtf_tuner_set_params;
+ }
+ break;
+
+ case BTTV_BOARD_AVDVBT_771:
+ card->fe = dvb_attach(mt352_attach, &advbt771_samsung_tdtc9251dh0_config, card->i2c_adapter);
+ if (card->fe != NULL) {
+ card->fe->ops.tuner_ops.calc_regs = advbt771_samsung_tdtc9251dh0_tuner_calc_regs;
+ card->fe->ops.info.frequency_min = 174000000;
+ card->fe->ops.info.frequency_max = 862000000;
+ }
+ break;
+
+ case BTTV_BOARD_TWINHAN_DST:
+ /* DST is not a frontend driver !!! */
+ state = kmalloc(sizeof (struct dst_state), GFP_KERNEL);
+ if (!state) {
+ pr_err("No memory\n");
+ break;
+ }
+ /* Setup the Card */
+ state->config = &dst_config;
+ state->i2c = card->i2c_adapter;
+ state->bt = card->bt;
+ state->dst_ca = NULL;
+ /* DST is not a frontend, attaching the ASIC */
+ if (dvb_attach(dst_attach, state, &card->dvb_adapter) == NULL) {
+ pr_err("%s: Could not find a Twinhan DST\n", __func__);
+ break;
+ }
+ /* Attach other DST peripherals if any */
+ /* Conditional Access device */
+ card->fe = &state->frontend;
+ if (state->dst_hw_cap & DST_TYPE_HAS_CA)
+ dvb_attach(dst_ca_attach, state, &card->dvb_adapter);
+ break;
+
+ case BTTV_BOARD_PINNACLESAT:
+ card->fe = dvb_attach(cx24110_attach, &pctvsat_config, card->i2c_adapter);
+ if (card->fe) {
+ card->fe->ops.tuner_ops.init = pinnsat_tuner_init;
+ card->fe->ops.tuner_ops.sleep = pinnsat_tuner_sleep;
+ card->fe->ops.tuner_ops.set_params = cx24108_tuner_set_params;
+ }
+ break;
+
+ case BTTV_BOARD_PC_HDTV:
+ card->fe = dvb_attach(or51211_attach, &or51211_config, card->i2c_adapter);
+ if (card->fe != NULL)
+ dvb_attach(simple_tuner_attach, card->fe,
+ card->i2c_adapter, 0x61,
+ TUNER_PHILIPS_FCV1236D);
+ break;
+ }
+
+ if (card->fe == NULL)
+ pr_err("A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
+ card->bt->dev->vendor,
+ card->bt->dev->device,
+ card->bt->dev->subsystem_vendor,
+ card->bt->dev->subsystem_device);
+ else
+ if (dvb_register_frontend(&card->dvb_adapter, card->fe)) {
+ pr_err("Frontend registration failed!\n");
+ dvb_frontend_detach(card->fe);
+ card->fe = NULL;
+ }
+}
+
+static int __devinit dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type)
+{
+ int result;
+
+ result = dvb_register_adapter(&card->dvb_adapter, card->card_name,
+ THIS_MODULE, &card->bt->dev->dev,
+ adapter_nr);
+ if (result < 0) {
+ pr_err("dvb_register_adapter failed (errno = %d)\n", result);
+ return result;
+ }
+ card->dvb_adapter.priv = card;
+
+ card->bt->adapter = card->i2c_adapter;
+
+ memset(&card->demux, 0, sizeof(struct dvb_demux));
+
+ card->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING;
+
+ card->demux.priv = card;
+ card->demux.filternum = 256;
+ card->demux.feednum = 256;
+ card->demux.start_feed = dvb_bt8xx_start_feed;
+ card->demux.stop_feed = dvb_bt8xx_stop_feed;
+ card->demux.write_to_decoder = NULL;
+
+ result = dvb_dmx_init(&card->demux);
+ if (result < 0) {
+ pr_err("dvb_dmx_init failed (errno = %d)\n", result);
+ goto err_unregister_adaptor;
+ }
+
+ card->dmxdev.filternum = 256;
+ card->dmxdev.demux = &card->demux.dmx;
+ card->dmxdev.capabilities = 0;
+
+ result = dvb_dmxdev_init(&card->dmxdev, &card->dvb_adapter);
+ if (result < 0) {
+ pr_err("dvb_dmxdev_init failed (errno = %d)\n", result);
+ goto err_dmx_release;
+ }
+
+ card->fe_hw.source = DMX_FRONTEND_0;
+
+ result = card->demux.dmx.add_frontend(&card->demux.dmx, &card->fe_hw);
+ if (result < 0) {
+ pr_err("dvb_dmx_init failed (errno = %d)\n", result);
+ goto err_dmxdev_release;
+ }
+
+ card->fe_mem.source = DMX_MEMORY_FE;
+
+ result = card->demux.dmx.add_frontend(&card->demux.dmx, &card->fe_mem);
+ if (result < 0) {
+ pr_err("dvb_dmx_init failed (errno = %d)\n", result);
+ goto err_remove_hw_frontend;
+ }
+
+ result = card->demux.dmx.connect_frontend(&card->demux.dmx, &card->fe_hw);
+ if (result < 0) {
+ pr_err("dvb_dmx_init failed (errno = %d)\n", result);
+ goto err_remove_mem_frontend;
+ }
+
+ result = dvb_net_init(&card->dvb_adapter, &card->dvbnet, &card->demux.dmx);
+ if (result < 0) {
+ pr_err("dvb_net_init failed (errno = %d)\n", result);
+ goto err_disconnect_frontend;
+ }
+
+ tasklet_init(&card->bt->tasklet, dvb_bt8xx_task, (unsigned long) card);
+
+ frontend_init(card, type);
+
+ return 0;
+
+err_disconnect_frontend:
+ card->demux.dmx.disconnect_frontend(&card->demux.dmx);
+err_remove_mem_frontend:
+ card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_mem);
+err_remove_hw_frontend:
+ card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_hw);
+err_dmxdev_release:
+ dvb_dmxdev_release(&card->dmxdev);
+err_dmx_release:
+ dvb_dmx_release(&card->demux);
+err_unregister_adaptor:
+ dvb_unregister_adapter(&card->dvb_adapter);
+ return result;
+}
+
+static int __devinit dvb_bt8xx_probe(struct bttv_sub_device *sub)
+{
+ struct dvb_bt8xx_card *card;
+ struct pci_dev* bttv_pci_dev;
+ int ret;
+
+ if (!(card = kzalloc(sizeof(struct dvb_bt8xx_card), GFP_KERNEL)))
+ return -ENOMEM;
+
+ mutex_init(&card->lock);
+ card->bttv_nr = sub->core->nr;
+ strlcpy(card->card_name, sub->core->v4l2_dev.name, sizeof(card->card_name));
+ card->i2c_adapter = &sub->core->i2c_adap;
+
+ switch(sub->core->type) {
+ case BTTV_BOARD_PINNACLESAT:
+ card->gpio_mode = 0x0400c060;
+ /* should be: BT878_A_GAIN=0,BT878_A_PWRDN,BT878_DA_DPM,BT878_DA_SBR,
+ BT878_DA_IOM=1,BT878_DA_APP to enable serial highspeed mode. */
+ card->op_sync_orin = BT878_RISC_SYNC_MASK;
+ card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
+ break;
+
+ case BTTV_BOARD_DVICO_DVBT_LITE:
+ card->gpio_mode = 0x0400C060;
+ card->op_sync_orin = BT878_RISC_SYNC_MASK;
+ card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
+ /* 26, 15, 14, 6, 5
+ * A_PWRDN DA_DPM DA_SBR DA_IOM_DA
+ * DA_APP(parallel) */
+ break;
+
+ case BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE:
+ card->gpio_mode = 0x0400c060;
+ card->op_sync_orin = BT878_RISC_SYNC_MASK;
+ card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
+ break;
+
+ case BTTV_BOARD_NEBULA_DIGITV:
+ case BTTV_BOARD_AVDVBT_761:
+ card->gpio_mode = (1 << 26) | (1 << 14) | (1 << 5);
+ card->op_sync_orin = BT878_RISC_SYNC_MASK;
+ card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
+ /* A_PWRDN DA_SBR DA_APP (high speed serial) */
+ break;
+
+ case BTTV_BOARD_AVDVBT_771: //case 0x07711461:
+ card->gpio_mode = 0x0400402B;
+ card->op_sync_orin = BT878_RISC_SYNC_MASK;
+ card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
+ /* A_PWRDN DA_SBR DA_APP[0] PKTP=10 RISC_ENABLE FIFO_ENABLE*/
+ break;
+
+ case BTTV_BOARD_TWINHAN_DST:
+ card->gpio_mode = 0x2204f2c;
+ card->op_sync_orin = BT878_RISC_SYNC_MASK;
+ card->irq_err_ignore = BT878_APABORT | BT878_ARIPERR |
+ BT878_APPERR | BT878_AFBUS;
+ /* 25,21,14,11,10,9,8,3,2 then
+ * 0x33 = 5,4,1,0
+ * A_SEL=SML, DA_MLB, DA_SBR,
+ * DA_SDR=f, fifo trigger = 32 DWORDS
+ * IOM = 0 == audio A/D
+ * DPM = 0 == digital audio mode
+ * == async data parallel port
+ * then 0x33 (13 is set by start_capture)
+ * DA_APP = async data parallel port,
+ * ACAP_EN = 1,
+ * RISC+FIFO ENABLE */
+ break;
+
+ case BTTV_BOARD_PC_HDTV:
+ card->gpio_mode = 0x0100EC7B;
+ card->op_sync_orin = BT878_RISC_SYNC_MASK;
+ card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
+ break;
+
+ default:
+ pr_err("Unknown bttv card type: %d\n", sub->core->type);
+ kfree(card);
+ return -ENODEV;
+ }
+
+ dprintk("dvb_bt8xx: identified card%d as %s\n", card->bttv_nr, card->card_name);
+
+ if (!(bttv_pci_dev = bttv_get_pcidev(card->bttv_nr))) {
+ pr_err("no pci device for card %d\n", card->bttv_nr);
+ kfree(card);
+ return -ENODEV;
+ }
+
+ if (!(card->bt = dvb_bt8xx_878_match(card->bttv_nr, bttv_pci_dev))) {
+ pr_err("unable to determine DMA core of card %d,\n", card->bttv_nr);
+ pr_err("if you have the ALSA bt87x audio driver installed, try removing it.\n");
+
+ kfree(card);
+ return -ENODEV;
+ }
+
+ mutex_init(&card->bt->gpio_lock);
+ card->bt->bttv_nr = sub->core->nr;
+
+ if ( (ret = dvb_bt8xx_load_card(card, sub->core->type)) ) {
+ kfree(card);
+ return ret;
+ }
+
+ dev_set_drvdata(&sub->dev, card);
+ return 0;
+}
+
+static void dvb_bt8xx_remove(struct bttv_sub_device *sub)
+{
+ struct dvb_bt8xx_card *card = dev_get_drvdata(&sub->dev);
+
+ dprintk("dvb_bt8xx: unloading card%d\n", card->bttv_nr);
+
+ bt878_stop(card->bt);
+ tasklet_kill(&card->bt->tasklet);
+ dvb_net_release(&card->dvbnet);
+ card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_mem);
+ card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_hw);
+ dvb_dmxdev_release(&card->dmxdev);
+ dvb_dmx_release(&card->demux);
+ if (card->fe) {
+ dvb_unregister_frontend(card->fe);
+ dvb_frontend_detach(card->fe);
+ }
+ dvb_unregister_adapter(&card->dvb_adapter);
+
+ kfree(card);
+}
+
+static struct bttv_sub_driver driver = {
+ .drv = {
+ .name = "dvb-bt8xx",
+ },
+ .probe = dvb_bt8xx_probe,
+ .remove = dvb_bt8xx_remove,
+ /* FIXME:
+ * .shutdown = dvb_bt8xx_shutdown,
+ * .suspend = dvb_bt8xx_suspend,
+ * .resume = dvb_bt8xx_resume,
+ */
+};
+
+static int __init dvb_bt8xx_init(void)
+{
+ return bttv_sub_register(&driver, "dvb");
+}
+
+static void __exit dvb_bt8xx_exit(void)
+{
+ bttv_sub_unregister(&driver);
+}
+
+module_init(dvb_bt8xx_init);
+module_exit(dvb_bt8xx_exit);
+
+MODULE_DESCRIPTION("Bt8xx based DVB adapter driver");
+MODULE_AUTHOR("Florian Schirmer <jolt@tuxbox.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/pci/bt8xx/dvb-bt8xx.h b/drivers/media/pci/bt8xx/dvb-bt8xx.h
new file mode 100644
index 000000000000..4499ed2ac0ed
--- /dev/null
+++ b/drivers/media/pci/bt8xx/dvb-bt8xx.h
@@ -0,0 +1,63 @@
+/*
+ * Bt8xx based DVB adapter driver
+ *
+ * Copyright (C) 2002,2003 Florian Schirmer <jolt@tuxbox.org>
+ * Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@htp-tel.de>
+ * Copyright (C) 1999-2001 Ralph Metzler & Marcus Metzler for convergence integrated media GmbH
+ * Copyright (C) 1998,1999 Christian Theiss <mistert@rz.fh-augsburg.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef DVB_BT8XX_H
+#define DVB_BT8XX_H
+
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include "dvbdev.h"
+#include "dvb_net.h"
+#include "bttv.h"
+#include "mt352.h"
+#include "sp887x.h"
+#include "dst_common.h"
+#include "nxt6000.h"
+#include "cx24110.h"
+#include "or51211.h"
+#include "lgdt330x.h"
+#include "zl10353.h"
+#include "tuner-simple.h"
+
+struct dvb_bt8xx_card {
+ struct mutex lock;
+ int nfeeds;
+ char card_name[32];
+ struct dvb_adapter dvb_adapter;
+ struct bt878 *bt;
+ unsigned int bttv_nr;
+ struct dvb_demux demux;
+ struct dmxdev dmxdev;
+ struct dmx_frontend fe_hw;
+ struct dmx_frontend fe_mem;
+ u32 gpio_mode;
+ u32 op_sync_orin;
+ u32 irq_err_ignore;
+ struct i2c_adapter *i2c_adapter;
+ struct dvb_net dvbnet;
+
+ struct dvb_frontend* fe;
+};
+
+#endif /* DVB_BT8XX_H */
diff --git a/drivers/media/pci/ddbridge/Kconfig b/drivers/media/pci/ddbridge/Kconfig
new file mode 100644
index 000000000000..d099e1a12c85
--- /dev/null
+++ b/drivers/media/pci/ddbridge/Kconfig
@@ -0,0 +1,18 @@
+config DVB_DDBRIDGE
+ tristate "Digital Devices bridge support"
+ depends on DVB_CORE && PCI && I2C
+ select DVB_LNBP21 if !DVB_FE_CUSTOMISE
+ select DVB_STV6110x if !DVB_FE_CUSTOMISE
+ select DVB_STV090x if !DVB_FE_CUSTOMISE
+ select DVB_DRXK if !DVB_FE_CUSTOMISE
+ select DVB_TDA18271C2DD if !DVB_FE_CUSTOMISE
+ ---help---
+ Support for cards with the Digital Devices PCI express bridge:
+ - Octopus PCIe Bridge
+ - Octopus mini PCIe Bridge
+ - Octopus LE
+ - DuoFlex S2 Octopus
+ - DuoFlex CT Octopus
+ - cineS2(v6)
+
+ Say Y if you own such a card and want to use it.
diff --git a/drivers/media/pci/ddbridge/Makefile b/drivers/media/pci/ddbridge/Makefile
new file mode 100644
index 000000000000..9d083c98ce58
--- /dev/null
+++ b/drivers/media/pci/ddbridge/Makefile
@@ -0,0 +1,14 @@
+#
+# Makefile for the ddbridge device driver
+#
+
+ddbridge-objs := ddbridge-core.o
+
+obj-$(CONFIG_DVB_DDBRIDGE) += ddbridge.o
+
+ccflags-y += -Idrivers/media/dvb-core/
+ccflags-y += -Idrivers/media/dvb-frontends/
+ccflags-y += -Idrivers/media/common/tuners/
+
+# For the staging CI driver cxd2099
+ccflags-y += -Idrivers/staging/media/cxd2099/
diff --git a/drivers/media/pci/ddbridge/ddbridge-core.c b/drivers/media/pci/ddbridge/ddbridge-core.c
new file mode 100644
index 000000000000..ebf3f05839d2
--- /dev/null
+++ b/drivers/media/pci/ddbridge/ddbridge-core.c
@@ -0,0 +1,1723 @@
+/*
+ * ddbridge.c: Digital Devices PCIe bridge driver
+ *
+ * Copyright (C) 2010-2011 Digital Devices GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 only, as published by the Free Software Foundation.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/poll.h>
+#include <linux/io.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/timer.h>
+#include <linux/i2c.h>
+#include <linux/swab.h>
+#include <linux/vmalloc.h>
+#include "ddbridge.h"
+
+#include "ddbridge-regs.h"
+
+#include "tda18271c2dd.h"
+#include "stv6110x.h"
+#include "stv090x.h"
+#include "lnbh24.h"
+#include "drxk.h"
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+/* MSI had problems with lost interrupts, fixed but needs testing */
+#undef CONFIG_PCI_MSI
+
+/******************************************************************************/
+
+static int i2c_read(struct i2c_adapter *adapter, u8 adr, u8 *val)
+{
+ struct i2c_msg msgs[1] = {{.addr = adr, .flags = I2C_M_RD,
+ .buf = val, .len = 1 } };
+ return (i2c_transfer(adapter, msgs, 1) == 1) ? 0 : -1;
+}
+
+static int i2c_read_reg(struct i2c_adapter *adapter, u8 adr, u8 reg, u8 *val)
+{
+ struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0,
+ .buf = &reg, .len = 1 },
+ {.addr = adr, .flags = I2C_M_RD,
+ .buf = val, .len = 1 } };
+ return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1;
+}
+
+static int i2c_read_reg16(struct i2c_adapter *adapter, u8 adr,
+ u16 reg, u8 *val)
+{
+ u8 msg[2] = {reg>>8, reg&0xff};
+ struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0,
+ .buf = msg, .len = 2},
+ {.addr = adr, .flags = I2C_M_RD,
+ .buf = val, .len = 1} };
+ return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1;
+}
+
+static int ddb_i2c_cmd(struct ddb_i2c *i2c, u32 adr, u32 cmd)
+{
+ struct ddb *dev = i2c->dev;
+ int stat;
+ u32 val;
+
+ i2c->done = 0;
+ ddbwritel((adr << 9) | cmd, i2c->regs + I2C_COMMAND);
+ stat = wait_event_timeout(i2c->wq, i2c->done == 1, HZ);
+ if (stat <= 0) {
+ printk(KERN_ERR "I2C timeout\n");
+ { /* MSI debugging*/
+ u32 istat = ddbreadl(INTERRUPT_STATUS);
+ printk(KERN_ERR "IRS %08x\n", istat);
+ ddbwritel(istat, INTERRUPT_ACK);
+ }
+ return -EIO;
+ }
+ val = ddbreadl(i2c->regs+I2C_COMMAND);
+ if (val & 0x70000)
+ return -EIO;
+ return 0;
+}
+
+static int ddb_i2c_master_xfer(struct i2c_adapter *adapter,
+ struct i2c_msg msg[], int num)
+{
+ struct ddb_i2c *i2c = (struct ddb_i2c *)i2c_get_adapdata(adapter);
+ struct ddb *dev = i2c->dev;
+ u8 addr = 0;
+
+ if (num)
+ addr = msg[0].addr;
+
+ if (num == 2 && msg[1].flags & I2C_M_RD &&
+ !(msg[0].flags & I2C_M_RD)) {
+ memcpy_toio(dev->regs + I2C_TASKMEM_BASE + i2c->wbuf,
+ msg[0].buf, msg[0].len);
+ ddbwritel(msg[0].len|(msg[1].len << 16),
+ i2c->regs+I2C_TASKLENGTH);
+ if (!ddb_i2c_cmd(i2c, addr, 1)) {
+ memcpy_fromio(msg[1].buf,
+ dev->regs + I2C_TASKMEM_BASE + i2c->rbuf,
+ msg[1].len);
+ return num;
+ }
+ }
+
+ if (num == 1 && !(msg[0].flags & I2C_M_RD)) {
+ ddbcpyto(I2C_TASKMEM_BASE + i2c->wbuf, msg[0].buf, msg[0].len);
+ ddbwritel(msg[0].len, i2c->regs + I2C_TASKLENGTH);
+ if (!ddb_i2c_cmd(i2c, addr, 2))
+ return num;
+ }
+ if (num == 1 && (msg[0].flags & I2C_M_RD)) {
+ ddbwritel(msg[0].len << 16, i2c->regs + I2C_TASKLENGTH);
+ if (!ddb_i2c_cmd(i2c, addr, 3)) {
+ ddbcpyfrom(msg[0].buf,
+ I2C_TASKMEM_BASE + i2c->rbuf, msg[0].len);
+ return num;
+ }
+ }
+ return -EIO;
+}
+
+
+static u32 ddb_i2c_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_SMBUS_EMUL;
+}
+
+struct i2c_algorithm ddb_i2c_algo = {
+ .master_xfer = ddb_i2c_master_xfer,
+ .functionality = ddb_i2c_functionality,
+};
+
+static void ddb_i2c_release(struct ddb *dev)
+{
+ int i;
+ struct ddb_i2c *i2c;
+ struct i2c_adapter *adap;
+
+ for (i = 0; i < dev->info->port_num; i++) {
+ i2c = &dev->i2c[i];
+ adap = &i2c->adap;
+ i2c_del_adapter(adap);
+ }
+}
+
+static int ddb_i2c_init(struct ddb *dev)
+{
+ int i, j, stat = 0;
+ struct ddb_i2c *i2c;
+ struct i2c_adapter *adap;
+
+ for (i = 0; i < dev->info->port_num; i++) {
+ i2c = &dev->i2c[i];
+ i2c->dev = dev;
+ i2c->nr = i;
+ i2c->wbuf = i * (I2C_TASKMEM_SIZE / 4);
+ i2c->rbuf = i2c->wbuf + (I2C_TASKMEM_SIZE / 8);
+ i2c->regs = 0x80 + i * 0x20;
+ ddbwritel(I2C_SPEED_100, i2c->regs + I2C_TIMING);
+ ddbwritel((i2c->rbuf << 16) | i2c->wbuf,
+ i2c->regs + I2C_TASKADDRESS);
+ init_waitqueue_head(&i2c->wq);
+
+ adap = &i2c->adap;
+ i2c_set_adapdata(adap, i2c);
+#ifdef I2C_ADAP_CLASS_TV_DIGITAL
+ adap->class = I2C_ADAP_CLASS_TV_DIGITAL|I2C_CLASS_TV_ANALOG;
+#else
+#ifdef I2C_CLASS_TV_ANALOG
+ adap->class = I2C_CLASS_TV_ANALOG;
+#endif
+#endif
+ strcpy(adap->name, "ddbridge");
+ adap->algo = &ddb_i2c_algo;
+ adap->algo_data = (void *)i2c;
+ adap->dev.parent = &dev->pdev->dev;
+ stat = i2c_add_adapter(adap);
+ if (stat)
+ break;
+ }
+ if (stat)
+ for (j = 0; j < i; j++) {
+ i2c = &dev->i2c[j];
+ adap = &i2c->adap;
+ i2c_del_adapter(adap);
+ }
+ return stat;
+}
+
+
+/******************************************************************************/
+/******************************************************************************/
+/******************************************************************************/
+
+#if 0
+static void set_table(struct ddb *dev, u32 off,
+ dma_addr_t *pbuf, u32 num)
+{
+ u32 i, base;
+ u64 mem;
+
+ base = DMA_BASE_ADDRESS_TABLE + off;
+ for (i = 0; i < num; i++) {
+ mem = pbuf[i];
+ ddbwritel(mem & 0xffffffff, base + i * 8);
+ ddbwritel(mem >> 32, base + i * 8 + 4);
+ }
+}
+#endif
+
+static void ddb_address_table(struct ddb *dev)
+{
+ u32 i, j, base;
+ u64 mem;
+ dma_addr_t *pbuf;
+
+ for (i = 0; i < dev->info->port_num * 2; i++) {
+ base = DMA_BASE_ADDRESS_TABLE + i * 0x100;
+ pbuf = dev->input[i].pbuf;
+ for (j = 0; j < dev->input[i].dma_buf_num; j++) {
+ mem = pbuf[j];
+ ddbwritel(mem & 0xffffffff, base + j * 8);
+ ddbwritel(mem >> 32, base + j * 8 + 4);
+ }
+ }
+ for (i = 0; i < dev->info->port_num; i++) {
+ base = DMA_BASE_ADDRESS_TABLE + 0x800 + i * 0x100;
+ pbuf = dev->output[i].pbuf;
+ for (j = 0; j < dev->output[i].dma_buf_num; j++) {
+ mem = pbuf[j];
+ ddbwritel(mem & 0xffffffff, base + j * 8);
+ ddbwritel(mem >> 32, base + j * 8 + 4);
+ }
+ }
+}
+
+static void io_free(struct pci_dev *pdev, u8 **vbuf,
+ dma_addr_t *pbuf, u32 size, int num)
+{
+ int i;
+
+ for (i = 0; i < num; i++) {
+ if (vbuf[i]) {
+ pci_free_consistent(pdev, size, vbuf[i], pbuf[i]);
+ vbuf[i] = 0;
+ }
+ }
+}
+
+static int io_alloc(struct pci_dev *pdev, u8 **vbuf,
+ dma_addr_t *pbuf, u32 size, int num)
+{
+ int i;
+
+ for (i = 0; i < num; i++) {
+ vbuf[i] = pci_alloc_consistent(pdev, size, &pbuf[i]);
+ if (!vbuf[i])
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static int ddb_buffers_alloc(struct ddb *dev)
+{
+ int i;
+ struct ddb_port *port;
+
+ for (i = 0; i < dev->info->port_num; i++) {
+ port = &dev->port[i];
+ switch (port->class) {
+ case DDB_PORT_TUNER:
+ if (io_alloc(dev->pdev, port->input[0]->vbuf,
+ port->input[0]->pbuf,
+ port->input[0]->dma_buf_size,
+ port->input[0]->dma_buf_num) < 0)
+ return -1;
+ if (io_alloc(dev->pdev, port->input[1]->vbuf,
+ port->input[1]->pbuf,
+ port->input[1]->dma_buf_size,
+ port->input[1]->dma_buf_num) < 0)
+ return -1;
+ break;
+ case DDB_PORT_CI:
+ if (io_alloc(dev->pdev, port->input[0]->vbuf,
+ port->input[0]->pbuf,
+ port->input[0]->dma_buf_size,
+ port->input[0]->dma_buf_num) < 0)
+ return -1;
+ if (io_alloc(dev->pdev, port->output->vbuf,
+ port->output->pbuf,
+ port->output->dma_buf_size,
+ port->output->dma_buf_num) < 0)
+ return -1;
+ break;
+ default:
+ break;
+ }
+ }
+ ddb_address_table(dev);
+ return 0;
+}
+
+static void ddb_buffers_free(struct ddb *dev)
+{
+ int i;
+ struct ddb_port *port;
+
+ for (i = 0; i < dev->info->port_num; i++) {
+ port = &dev->port[i];
+ io_free(dev->pdev, port->input[0]->vbuf,
+ port->input[0]->pbuf,
+ port->input[0]->dma_buf_size,
+ port->input[0]->dma_buf_num);
+ io_free(dev->pdev, port->input[1]->vbuf,
+ port->input[1]->pbuf,
+ port->input[1]->dma_buf_size,
+ port->input[1]->dma_buf_num);
+ io_free(dev->pdev, port->output->vbuf,
+ port->output->pbuf,
+ port->output->dma_buf_size,
+ port->output->dma_buf_num);
+ }
+}
+
+static void ddb_input_start(struct ddb_input *input)
+{
+ struct ddb *dev = input->port->dev;
+
+ spin_lock_irq(&input->lock);
+ input->cbuf = 0;
+ input->coff = 0;
+
+ /* reset */
+ ddbwritel(0, TS_INPUT_CONTROL(input->nr));
+ ddbwritel(2, TS_INPUT_CONTROL(input->nr));
+ ddbwritel(0, TS_INPUT_CONTROL(input->nr));
+
+ ddbwritel((1 << 16) |
+ (input->dma_buf_num << 11) |
+ (input->dma_buf_size >> 7),
+ DMA_BUFFER_SIZE(input->nr));
+ ddbwritel(0, DMA_BUFFER_ACK(input->nr));
+
+ ddbwritel(1, DMA_BASE_WRITE);
+ ddbwritel(3, DMA_BUFFER_CONTROL(input->nr));
+ ddbwritel(9, TS_INPUT_CONTROL(input->nr));
+ input->running = 1;
+ spin_unlock_irq(&input->lock);
+}
+
+static void ddb_input_stop(struct ddb_input *input)
+{
+ struct ddb *dev = input->port->dev;
+
+ spin_lock_irq(&input->lock);
+ ddbwritel(0, TS_INPUT_CONTROL(input->nr));
+ ddbwritel(0, DMA_BUFFER_CONTROL(input->nr));
+ input->running = 0;
+ spin_unlock_irq(&input->lock);
+}
+
+static void ddb_output_start(struct ddb_output *output)
+{
+ struct ddb *dev = output->port->dev;
+
+ spin_lock_irq(&output->lock);
+ output->cbuf = 0;
+ output->coff = 0;
+ ddbwritel(0, TS_OUTPUT_CONTROL(output->nr));
+ ddbwritel(2, TS_OUTPUT_CONTROL(output->nr));
+ ddbwritel(0, TS_OUTPUT_CONTROL(output->nr));
+ ddbwritel(0x3c, TS_OUTPUT_CONTROL(output->nr));
+ ddbwritel((1 << 16) |
+ (output->dma_buf_num << 11) |
+ (output->dma_buf_size >> 7),
+ DMA_BUFFER_SIZE(output->nr + 8));
+ ddbwritel(0, DMA_BUFFER_ACK(output->nr + 8));
+
+ ddbwritel(1, DMA_BASE_READ);
+ ddbwritel(3, DMA_BUFFER_CONTROL(output->nr + 8));
+ /* ddbwritel(0xbd, TS_OUTPUT_CONTROL(output->nr)); */
+ ddbwritel(0x1d, TS_OUTPUT_CONTROL(output->nr));
+ output->running = 1;
+ spin_unlock_irq(&output->lock);
+}
+
+static void ddb_output_stop(struct ddb_output *output)
+{
+ struct ddb *dev = output->port->dev;
+
+ spin_lock_irq(&output->lock);
+ ddbwritel(0, TS_OUTPUT_CONTROL(output->nr));
+ ddbwritel(0, DMA_BUFFER_CONTROL(output->nr + 8));
+ output->running = 0;
+ spin_unlock_irq(&output->lock);
+}
+
+static u32 ddb_output_free(struct ddb_output *output)
+{
+ u32 idx, off, stat = output->stat;
+ s32 diff;
+
+ idx = (stat >> 11) & 0x1f;
+ off = (stat & 0x7ff) << 7;
+
+ if (output->cbuf != idx) {
+ if ((((output->cbuf + 1) % output->dma_buf_num) == idx) &&
+ (output->dma_buf_size - output->coff <= 188))
+ return 0;
+ return 188;
+ }
+ diff = off - output->coff;
+ if (diff <= 0 || diff > 188)
+ return 188;
+ return 0;
+}
+
+static ssize_t ddb_output_write(struct ddb_output *output,
+ const u8 *buf, size_t count)
+{
+ struct ddb *dev = output->port->dev;
+ u32 idx, off, stat = output->stat;
+ u32 left = count, len;
+
+ idx = (stat >> 11) & 0x1f;
+ off = (stat & 0x7ff) << 7;
+
+ while (left) {
+ len = output->dma_buf_size - output->coff;
+ if ((((output->cbuf + 1) % output->dma_buf_num) == idx) &&
+ (off == 0)) {
+ if (len <= 188)
+ break;
+ len -= 188;
+ }
+ if (output->cbuf == idx) {
+ if (off > output->coff) {
+#if 1
+ len = off - output->coff;
+ len -= (len % 188);
+ if (len <= 188)
+
+#endif
+ break;
+ len -= 188;
+ }
+ }
+ if (len > left)
+ len = left;
+ if (copy_from_user(output->vbuf[output->cbuf] + output->coff,
+ buf, len))
+ return -EIO;
+ left -= len;
+ buf += len;
+ output->coff += len;
+ if (output->coff == output->dma_buf_size) {
+ output->coff = 0;
+ output->cbuf = ((output->cbuf + 1) % output->dma_buf_num);
+ }
+ ddbwritel((output->cbuf << 11) | (output->coff >> 7),
+ DMA_BUFFER_ACK(output->nr + 8));
+ }
+ return count - left;
+}
+
+static u32 ddb_input_avail(struct ddb_input *input)
+{
+ struct ddb *dev = input->port->dev;
+ u32 idx, off, stat = input->stat;
+ u32 ctrl = ddbreadl(DMA_BUFFER_CONTROL(input->nr));
+
+ idx = (stat >> 11) & 0x1f;
+ off = (stat & 0x7ff) << 7;
+
+ if (ctrl & 4) {
+ printk(KERN_ERR "IA %d %d %08x\n", idx, off, ctrl);
+ ddbwritel(input->stat, DMA_BUFFER_ACK(input->nr));
+ return 0;
+ }
+ if (input->cbuf != idx)
+ return 188;
+ return 0;
+}
+
+static ssize_t ddb_input_read(struct ddb_input *input, u8 *buf, size_t count)
+{
+ struct ddb *dev = input->port->dev;
+ u32 left = count;
+ u32 idx, free, stat = input->stat;
+ int ret;
+
+ idx = (stat >> 11) & 0x1f;
+
+ while (left) {
+ if (input->cbuf == idx)
+ return count - left;
+ free = input->dma_buf_size - input->coff;
+ if (free > left)
+ free = left;
+ ret = copy_to_user(buf, input->vbuf[input->cbuf] +
+ input->coff, free);
+ if (ret)
+ return -EFAULT;
+ input->coff += free;
+ if (input->coff == input->dma_buf_size) {
+ input->coff = 0;
+ input->cbuf = (input->cbuf+1) % input->dma_buf_num;
+ }
+ left -= free;
+ ddbwritel((input->cbuf << 11) | (input->coff >> 7),
+ DMA_BUFFER_ACK(input->nr));
+ }
+ return count;
+}
+
+/******************************************************************************/
+/******************************************************************************/
+/******************************************************************************/
+
+#if 0
+static struct ddb_input *fe2input(struct ddb *dev, struct dvb_frontend *fe)
+{
+ int i;
+
+ for (i = 0; i < dev->info->port_num * 2; i++) {
+ if (dev->input[i].fe == fe)
+ return &dev->input[i];
+ }
+ return NULL;
+}
+#endif
+
+static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+ struct ddb_input *input = fe->sec_priv;
+ struct ddb_port *port = input->port;
+ int status;
+
+ if (enable) {
+ mutex_lock(&port->i2c_gate_lock);
+ status = input->gate_ctrl(fe, 1);
+ } else {
+ status = input->gate_ctrl(fe, 0);
+ mutex_unlock(&port->i2c_gate_lock);
+ }
+ return status;
+}
+
+static int demod_attach_drxk(struct ddb_input *input)
+{
+ struct i2c_adapter *i2c = &input->port->i2c->adap;
+ struct dvb_frontend *fe;
+ struct drxk_config config;
+
+ memset(&config, 0, sizeof(config));
+ config.microcode_name = "drxk_a3.mc";
+ config.qam_demod_parameter_count = 4;
+ config.adr = 0x29 + (input->nr & 1);
+
+ fe = input->fe = dvb_attach(drxk_attach, &config, i2c);
+ if (!input->fe) {
+ printk(KERN_ERR "No DRXK found!\n");
+ return -ENODEV;
+ }
+ fe->sec_priv = input;
+ input->gate_ctrl = fe->ops.i2c_gate_ctrl;
+ fe->ops.i2c_gate_ctrl = drxk_gate_ctrl;
+ return 0;
+}
+
+static int tuner_attach_tda18271(struct ddb_input *input)
+{
+ struct i2c_adapter *i2c = &input->port->i2c->adap;
+ struct dvb_frontend *fe;
+
+ if (input->fe->ops.i2c_gate_ctrl)
+ input->fe->ops.i2c_gate_ctrl(input->fe, 1);
+ fe = dvb_attach(tda18271c2dd_attach, input->fe, i2c, 0x60);
+ if (!fe) {
+ printk(KERN_ERR "No TDA18271 found!\n");
+ return -ENODEV;
+ }
+ if (input->fe->ops.i2c_gate_ctrl)
+ input->fe->ops.i2c_gate_ctrl(input->fe, 0);
+ return 0;
+}
+
+/******************************************************************************/
+/******************************************************************************/
+/******************************************************************************/
+
+static struct stv090x_config stv0900 = {
+ .device = STV0900,
+ .demod_mode = STV090x_DUAL,
+ .clk_mode = STV090x_CLK_EXT,
+
+ .xtal = 27000000,
+ .address = 0x69,
+
+ .ts1_mode = STV090x_TSMODE_SERIAL_PUNCTURED,
+ .ts2_mode = STV090x_TSMODE_SERIAL_PUNCTURED,
+
+ .repeater_level = STV090x_RPTLEVEL_16,
+
+ .adc1_range = STV090x_ADC_1Vpp,
+ .adc2_range = STV090x_ADC_1Vpp,
+
+ .diseqc_envelope_mode = true,
+};
+
+static struct stv090x_config stv0900_aa = {
+ .device = STV0900,
+ .demod_mode = STV090x_DUAL,
+ .clk_mode = STV090x_CLK_EXT,
+
+ .xtal = 27000000,
+ .address = 0x68,
+
+ .ts1_mode = STV090x_TSMODE_SERIAL_PUNCTURED,
+ .ts2_mode = STV090x_TSMODE_SERIAL_PUNCTURED,
+
+ .repeater_level = STV090x_RPTLEVEL_16,
+
+ .adc1_range = STV090x_ADC_1Vpp,
+ .adc2_range = STV090x_ADC_1Vpp,
+
+ .diseqc_envelope_mode = true,
+};
+
+static struct stv6110x_config stv6110a = {
+ .addr = 0x60,
+ .refclk = 27000000,
+ .clk_div = 1,
+};
+
+static struct stv6110x_config stv6110b = {
+ .addr = 0x63,
+ .refclk = 27000000,
+ .clk_div = 1,
+};
+
+static int demod_attach_stv0900(struct ddb_input *input, int type)
+{
+ struct i2c_adapter *i2c = &input->port->i2c->adap;
+ struct stv090x_config *feconf = type ? &stv0900_aa : &stv0900;
+
+ input->fe = dvb_attach(stv090x_attach, feconf, i2c,
+ (input->nr & 1) ? STV090x_DEMODULATOR_1
+ : STV090x_DEMODULATOR_0);
+ if (!input->fe) {
+ printk(KERN_ERR "No STV0900 found!\n");
+ return -ENODEV;
+ }
+ if (!dvb_attach(lnbh24_attach, input->fe, i2c, 0,
+ 0, (input->nr & 1) ?
+ (0x09 - type) : (0x0b - type))) {
+ printk(KERN_ERR "No LNBH24 found!\n");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static int tuner_attach_stv6110(struct ddb_input *input, int type)
+{
+ struct i2c_adapter *i2c = &input->port->i2c->adap;
+ struct stv090x_config *feconf = type ? &stv0900_aa : &stv0900;
+ struct stv6110x_config *tunerconf = (input->nr & 1) ?
+ &stv6110b : &stv6110a;
+ struct stv6110x_devctl *ctl;
+
+ ctl = dvb_attach(stv6110x_attach, input->fe, tunerconf, i2c);
+ if (!ctl) {
+ printk(KERN_ERR "No STV6110X found!\n");
+ return -ENODEV;
+ }
+ printk(KERN_INFO "attach tuner input %d adr %02x\n",
+ input->nr, tunerconf->addr);
+
+ feconf->tuner_init = ctl->tuner_init;
+ feconf->tuner_sleep = ctl->tuner_sleep;
+ feconf->tuner_set_mode = ctl->tuner_set_mode;
+ feconf->tuner_set_frequency = ctl->tuner_set_frequency;
+ feconf->tuner_get_frequency = ctl->tuner_get_frequency;
+ feconf->tuner_set_bandwidth = ctl->tuner_set_bandwidth;
+ feconf->tuner_get_bandwidth = ctl->tuner_get_bandwidth;
+ feconf->tuner_set_bbgain = ctl->tuner_set_bbgain;
+ feconf->tuner_get_bbgain = ctl->tuner_get_bbgain;
+ feconf->tuner_set_refclk = ctl->tuner_set_refclk;
+ feconf->tuner_get_status = ctl->tuner_get_status;
+
+ return 0;
+}
+
+static int my_dvb_dmx_ts_card_init(struct dvb_demux *dvbdemux, char *id,
+ int (*start_feed)(struct dvb_demux_feed *),
+ int (*stop_feed)(struct dvb_demux_feed *),
+ void *priv)
+{
+ dvbdemux->priv = priv;
+
+ dvbdemux->filternum = 256;
+ dvbdemux->feednum = 256;
+ dvbdemux->start_feed = start_feed;
+ dvbdemux->stop_feed = stop_feed;
+ dvbdemux->write_to_decoder = NULL;
+ dvbdemux->dmx.capabilities = (DMX_TS_FILTERING |
+ DMX_SECTION_FILTERING |
+ DMX_MEMORY_BASED_FILTERING);
+ return dvb_dmx_init(dvbdemux);
+}
+
+static int my_dvb_dmxdev_ts_card_init(struct dmxdev *dmxdev,
+ struct dvb_demux *dvbdemux,
+ struct dmx_frontend *hw_frontend,
+ struct dmx_frontend *mem_frontend,
+ struct dvb_adapter *dvb_adapter)
+{
+ int ret;
+
+ dmxdev->filternum = 256;
+ dmxdev->demux = &dvbdemux->dmx;
+ dmxdev->capabilities = 0;
+ ret = dvb_dmxdev_init(dmxdev, dvb_adapter);
+ if (ret < 0)
+ return ret;
+
+ hw_frontend->source = DMX_FRONTEND_0;
+ dvbdemux->dmx.add_frontend(&dvbdemux->dmx, hw_frontend);
+ mem_frontend->source = DMX_MEMORY_FE;
+ dvbdemux->dmx.add_frontend(&dvbdemux->dmx, mem_frontend);
+ return dvbdemux->dmx.connect_frontend(&dvbdemux->dmx, hw_frontend);
+}
+
+static int start_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
+ struct ddb_input *input = dvbdmx->priv;
+
+ if (!input->users)
+ ddb_input_start(input);
+
+ return ++input->users;
+}
+
+static int stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
+ struct ddb_input *input = dvbdmx->priv;
+
+ if (--input->users)
+ return input->users;
+
+ ddb_input_stop(input);
+ return 0;
+}
+
+
+static void dvb_input_detach(struct ddb_input *input)
+{
+ struct dvb_adapter *adap = &input->adap;
+ struct dvb_demux *dvbdemux = &input->demux;
+
+ switch (input->attached) {
+ case 5:
+ if (input->fe2)
+ dvb_unregister_frontend(input->fe2);
+ if (input->fe) {
+ dvb_unregister_frontend(input->fe);
+ dvb_frontend_detach(input->fe);
+ input->fe = NULL;
+ }
+ case 4:
+ dvb_net_release(&input->dvbnet);
+
+ case 3:
+ dvbdemux->dmx.close(&dvbdemux->dmx);
+ dvbdemux->dmx.remove_frontend(&dvbdemux->dmx,
+ &input->hw_frontend);
+ dvbdemux->dmx.remove_frontend(&dvbdemux->dmx,
+ &input->mem_frontend);
+ dvb_dmxdev_release(&input->dmxdev);
+
+ case 2:
+ dvb_dmx_release(&input->demux);
+
+ case 1:
+ dvb_unregister_adapter(adap);
+ }
+ input->attached = 0;
+}
+
+static int dvb_input_attach(struct ddb_input *input)
+{
+ int ret;
+ struct ddb_port *port = input->port;
+ struct dvb_adapter *adap = &input->adap;
+ struct dvb_demux *dvbdemux = &input->demux;
+
+ ret = dvb_register_adapter(adap, "DDBridge", THIS_MODULE,
+ &input->port->dev->pdev->dev,
+ adapter_nr);
+ if (ret < 0) {
+ printk(KERN_ERR "ddbridge: Could not register adapter."
+ "Check if you enabled enough adapters in dvb-core!\n");
+ return ret;
+ }
+ input->attached = 1;
+
+ ret = my_dvb_dmx_ts_card_init(dvbdemux, "SW demux",
+ start_feed,
+ stop_feed, input);
+ if (ret < 0)
+ return ret;
+ input->attached = 2;
+
+ ret = my_dvb_dmxdev_ts_card_init(&input->dmxdev, &input->demux,
+ &input->hw_frontend,
+ &input->mem_frontend, adap);
+ if (ret < 0)
+ return ret;
+ input->attached = 3;
+
+ ret = dvb_net_init(adap, &input->dvbnet, input->dmxdev.demux);
+ if (ret < 0)
+ return ret;
+ input->attached = 4;
+
+ input->fe = 0;
+ switch (port->type) {
+ case DDB_TUNER_DVBS_ST:
+ if (demod_attach_stv0900(input, 0) < 0)
+ return -ENODEV;
+ if (tuner_attach_stv6110(input, 0) < 0)
+ return -ENODEV;
+ if (input->fe) {
+ if (dvb_register_frontend(adap, input->fe) < 0)
+ return -ENODEV;
+ }
+ break;
+ case DDB_TUNER_DVBS_ST_AA:
+ if (demod_attach_stv0900(input, 1) < 0)
+ return -ENODEV;
+ if (tuner_attach_stv6110(input, 1) < 0)
+ return -ENODEV;
+ if (input->fe) {
+ if (dvb_register_frontend(adap, input->fe) < 0)
+ return -ENODEV;
+ }
+ break;
+ case DDB_TUNER_DVBCT_TR:
+ if (demod_attach_drxk(input) < 0)
+ return -ENODEV;
+ if (tuner_attach_tda18271(input) < 0)
+ return -ENODEV;
+ if (input->fe) {
+ if (dvb_register_frontend(adap, input->fe) < 0)
+ return -ENODEV;
+ }
+ if (input->fe2) {
+ if (dvb_register_frontend(adap, input->fe2) < 0)
+ return -ENODEV;
+ input->fe2->tuner_priv = input->fe->tuner_priv;
+ memcpy(&input->fe2->ops.tuner_ops,
+ &input->fe->ops.tuner_ops,
+ sizeof(struct dvb_tuner_ops));
+ }
+ break;
+ }
+ input->attached = 5;
+ return 0;
+}
+
+/****************************************************************************/
+/****************************************************************************/
+
+static ssize_t ts_write(struct file *file, const char *buf,
+ size_t count, loff_t *ppos)
+{
+ struct dvb_device *dvbdev = file->private_data;
+ struct ddb_output *output = dvbdev->priv;
+ size_t left = count;
+ int stat;
+
+ while (left) {
+ if (ddb_output_free(output) < 188) {
+ if (file->f_flags & O_NONBLOCK)
+ break;
+ if (wait_event_interruptible(
+ output->wq, ddb_output_free(output) >= 188) < 0)
+ break;
+ }
+ stat = ddb_output_write(output, buf, left);
+ if (stat < 0)
+ break;
+ buf += stat;
+ left -= stat;
+ }
+ return (left == count) ? -EAGAIN : (count - left);
+}
+
+static ssize_t ts_read(struct file *file, char *buf,
+ size_t count, loff_t *ppos)
+{
+ struct dvb_device *dvbdev = file->private_data;
+ struct ddb_output *output = dvbdev->priv;
+ struct ddb_input *input = output->port->input[0];
+ int left, read;
+
+ count -= count % 188;
+ left = count;
+ while (left) {
+ if (ddb_input_avail(input) < 188) {
+ if (file->f_flags & O_NONBLOCK)
+ break;
+ if (wait_event_interruptible(
+ input->wq, ddb_input_avail(input) >= 188) < 0)
+ break;
+ }
+ read = ddb_input_read(input, buf, left);
+ if (read < 0)
+ return read;
+ left -= read;
+ buf += read;
+ }
+ return (left == count) ? -EAGAIN : (count - left);
+}
+
+static unsigned int ts_poll(struct file *file, poll_table *wait)
+{
+ /*
+ struct dvb_device *dvbdev = file->private_data;
+ struct ddb_output *output = dvbdev->priv;
+ struct ddb_input *input = output->port->input[0];
+ */
+ unsigned int mask = 0;
+
+#if 0
+ if (data_avail_to_read)
+ mask |= POLLIN | POLLRDNORM;
+ if (data_avail_to_write)
+ mask |= POLLOUT | POLLWRNORM;
+
+ poll_wait(file, &read_queue, wait);
+ poll_wait(file, &write_queue, wait);
+#endif
+ return mask;
+}
+
+static const struct file_operations ci_fops = {
+ .owner = THIS_MODULE,
+ .read = ts_read,
+ .write = ts_write,
+ .open = dvb_generic_open,
+ .release = dvb_generic_release,
+ .poll = ts_poll,
+ .mmap = 0,
+};
+
+static struct dvb_device dvbdev_ci = {
+ .priv = 0,
+ .readers = -1,
+ .writers = -1,
+ .users = -1,
+ .fops = &ci_fops,
+};
+
+/****************************************************************************/
+/****************************************************************************/
+/****************************************************************************/
+
+static void input_tasklet(unsigned long data)
+{
+ struct ddb_input *input = (struct ddb_input *) data;
+ struct ddb *dev = input->port->dev;
+
+ spin_lock(&input->lock);
+ if (!input->running) {
+ spin_unlock(&input->lock);
+ return;
+ }
+ input->stat = ddbreadl(DMA_BUFFER_CURRENT(input->nr));
+
+ if (input->port->class == DDB_PORT_TUNER) {
+ if (4&ddbreadl(DMA_BUFFER_CONTROL(input->nr)))
+ printk(KERN_ERR "Overflow input %d\n", input->nr);
+ while (input->cbuf != ((input->stat >> 11) & 0x1f)
+ || (4&ddbreadl(DMA_BUFFER_CONTROL(input->nr)))) {
+ dvb_dmx_swfilter_packets(&input->demux,
+ input->vbuf[input->cbuf],
+ input->dma_buf_size / 188);
+
+ input->cbuf = (input->cbuf + 1) % input->dma_buf_num;
+ ddbwritel((input->cbuf << 11),
+ DMA_BUFFER_ACK(input->nr));
+ input->stat = ddbreadl(DMA_BUFFER_CURRENT(input->nr));
+ }
+ }
+ if (input->port->class == DDB_PORT_CI)
+ wake_up(&input->wq);
+ spin_unlock(&input->lock);
+}
+
+static void output_tasklet(unsigned long data)
+{
+ struct ddb_output *output = (struct ddb_output *) data;
+ struct ddb *dev = output->port->dev;
+
+ spin_lock(&output->lock);
+ if (!output->running) {
+ spin_unlock(&output->lock);
+ return;
+ }
+ output->stat = ddbreadl(DMA_BUFFER_CURRENT(output->nr + 8));
+ wake_up(&output->wq);
+ spin_unlock(&output->lock);
+}
+
+
+struct cxd2099_cfg cxd_cfg = {
+ .bitrate = 62000,
+ .adr = 0x40,
+ .polarity = 1,
+ .clock_mode = 1,
+};
+
+static int ddb_ci_attach(struct ddb_port *port)
+{
+ int ret;
+
+ ret = dvb_register_adapter(&port->output->adap,
+ "DDBridge",
+ THIS_MODULE,
+ &port->dev->pdev->dev,
+ adapter_nr);
+ if (ret < 0)
+ return ret;
+ port->en = cxd2099_attach(&cxd_cfg, port, &port->i2c->adap);
+ if (!port->en) {
+ dvb_unregister_adapter(&port->output->adap);
+ return -ENODEV;
+ }
+ ddb_input_start(port->input[0]);
+ ddb_output_start(port->output);
+ dvb_ca_en50221_init(&port->output->adap,
+ port->en, 0, 1);
+ ret = dvb_register_device(&port->output->adap, &port->output->dev,
+ &dvbdev_ci, (void *) port->output,
+ DVB_DEVICE_SEC);
+ return ret;
+}
+
+static int ddb_port_attach(struct ddb_port *port)
+{
+ int ret = 0;
+
+ switch (port->class) {
+ case DDB_PORT_TUNER:
+ ret = dvb_input_attach(port->input[0]);
+ if (ret < 0)
+ break;
+ ret = dvb_input_attach(port->input[1]);
+ break;
+ case DDB_PORT_CI:
+ ret = ddb_ci_attach(port);
+ break;
+ default:
+ break;
+ }
+ if (ret < 0)
+ printk(KERN_ERR "port_attach on port %d failed\n", port->nr);
+ return ret;
+}
+
+static int ddb_ports_attach(struct ddb *dev)
+{
+ int i, ret = 0;
+ struct ddb_port *port;
+
+ for (i = 0; i < dev->info->port_num; i++) {
+ port = &dev->port[i];
+ ret = ddb_port_attach(port);
+ if (ret < 0)
+ break;
+ }
+ return ret;
+}
+
+static void ddb_ports_detach(struct ddb *dev)
+{
+ int i;
+ struct ddb_port *port;
+
+ for (i = 0; i < dev->info->port_num; i++) {
+ port = &dev->port[i];
+ switch (port->class) {
+ case DDB_PORT_TUNER:
+ dvb_input_detach(port->input[0]);
+ dvb_input_detach(port->input[1]);
+ break;
+ case DDB_PORT_CI:
+ if (port->output->dev)
+ dvb_unregister_device(port->output->dev);
+ if (port->en) {
+ ddb_input_stop(port->input[0]);
+ ddb_output_stop(port->output);
+ dvb_ca_en50221_release(port->en);
+ kfree(port->en);
+ port->en = 0;
+ dvb_unregister_adapter(&port->output->adap);
+ }
+ break;
+ }
+ }
+}
+
+/****************************************************************************/
+/****************************************************************************/
+
+static int port_has_ci(struct ddb_port *port)
+{
+ u8 val;
+ return i2c_read_reg(&port->i2c->adap, 0x40, 0, &val) ? 0 : 1;
+}
+
+static int port_has_stv0900(struct ddb_port *port)
+{
+ u8 val;
+ if (i2c_read_reg16(&port->i2c->adap, 0x69, 0xf100, &val) < 0)
+ return 0;
+ return 1;
+}
+
+static int port_has_stv0900_aa(struct ddb_port *port)
+{
+ u8 val;
+ if (i2c_read_reg16(&port->i2c->adap, 0x68, 0xf100, &val) < 0)
+ return 0;
+ return 1;
+}
+
+static int port_has_drxks(struct ddb_port *port)
+{
+ u8 val;
+ if (i2c_read(&port->i2c->adap, 0x29, &val) < 0)
+ return 0;
+ if (i2c_read(&port->i2c->adap, 0x2a, &val) < 0)
+ return 0;
+ return 1;
+}
+
+static void ddb_port_probe(struct ddb_port *port)
+{
+ struct ddb *dev = port->dev;
+ char *modname = "NO MODULE";
+
+ port->class = DDB_PORT_NONE;
+
+ if (port_has_ci(port)) {
+ modname = "CI";
+ port->class = DDB_PORT_CI;
+ ddbwritel(I2C_SPEED_400, port->i2c->regs + I2C_TIMING);
+ } else if (port_has_stv0900(port)) {
+ modname = "DUAL DVB-S2";
+ port->class = DDB_PORT_TUNER;
+ port->type = DDB_TUNER_DVBS_ST;
+ ddbwritel(I2C_SPEED_100, port->i2c->regs + I2C_TIMING);
+ } else if (port_has_stv0900_aa(port)) {
+ modname = "DUAL DVB-S2";
+ port->class = DDB_PORT_TUNER;
+ port->type = DDB_TUNER_DVBS_ST_AA;
+ ddbwritel(I2C_SPEED_100, port->i2c->regs + I2C_TIMING);
+ } else if (port_has_drxks(port)) {
+ modname = "DUAL DVB-C/T";
+ port->class = DDB_PORT_TUNER;
+ port->type = DDB_TUNER_DVBCT_TR;
+ ddbwritel(I2C_SPEED_400, port->i2c->regs + I2C_TIMING);
+ }
+ printk(KERN_INFO "Port %d (TAB %d): %s\n",
+ port->nr, port->nr+1, modname);
+}
+
+static void ddb_input_init(struct ddb_port *port, int nr)
+{
+ struct ddb *dev = port->dev;
+ struct ddb_input *input = &dev->input[nr];
+
+ input->nr = nr;
+ input->port = port;
+ input->dma_buf_num = INPUT_DMA_BUFS;
+ input->dma_buf_size = INPUT_DMA_SIZE;
+ ddbwritel(0, TS_INPUT_CONTROL(nr));
+ ddbwritel(2, TS_INPUT_CONTROL(nr));
+ ddbwritel(0, TS_INPUT_CONTROL(nr));
+ ddbwritel(0, DMA_BUFFER_ACK(nr));
+ tasklet_init(&input->tasklet, input_tasklet, (unsigned long) input);
+ spin_lock_init(&input->lock);
+ init_waitqueue_head(&input->wq);
+}
+
+static void ddb_output_init(struct ddb_port *port, int nr)
+{
+ struct ddb *dev = port->dev;
+ struct ddb_output *output = &dev->output[nr];
+ output->nr = nr;
+ output->port = port;
+ output->dma_buf_num = OUTPUT_DMA_BUFS;
+ output->dma_buf_size = OUTPUT_DMA_SIZE;
+
+ ddbwritel(0, TS_OUTPUT_CONTROL(nr));
+ ddbwritel(2, TS_OUTPUT_CONTROL(nr));
+ ddbwritel(0, TS_OUTPUT_CONTROL(nr));
+ tasklet_init(&output->tasklet, output_tasklet, (unsigned long) output);
+ init_waitqueue_head(&output->wq);
+}
+
+static void ddb_ports_init(struct ddb *dev)
+{
+ int i;
+ struct ddb_port *port;
+
+ for (i = 0; i < dev->info->port_num; i++) {
+ port = &dev->port[i];
+ port->dev = dev;
+ port->nr = i;
+ port->i2c = &dev->i2c[i];
+ port->input[0] = &dev->input[2 * i];
+ port->input[1] = &dev->input[2 * i + 1];
+ port->output = &dev->output[i];
+
+ mutex_init(&port->i2c_gate_lock);
+ ddb_port_probe(port);
+ ddb_input_init(port, 2 * i);
+ ddb_input_init(port, 2 * i + 1);
+ ddb_output_init(port, i);
+ }
+}
+
+static void ddb_ports_release(struct ddb *dev)
+{
+ int i;
+ struct ddb_port *port;
+
+ for (i = 0; i < dev->info->port_num; i++) {
+ port = &dev->port[i];
+ port->dev = dev;
+ tasklet_kill(&port->input[0]->tasklet);
+ tasklet_kill(&port->input[1]->tasklet);
+ tasklet_kill(&port->output->tasklet);
+ }
+}
+
+/****************************************************************************/
+/****************************************************************************/
+/****************************************************************************/
+
+static void irq_handle_i2c(struct ddb *dev, int n)
+{
+ struct ddb_i2c *i2c = &dev->i2c[n];
+
+ i2c->done = 1;
+ wake_up(&i2c->wq);
+}
+
+static irqreturn_t irq_handler(int irq, void *dev_id)
+{
+ struct ddb *dev = (struct ddb *) dev_id;
+ u32 s = ddbreadl(INTERRUPT_STATUS);
+
+ if (!s)
+ return IRQ_NONE;
+
+ do {
+ ddbwritel(s, INTERRUPT_ACK);
+
+ if (s & 0x00000001)
+ irq_handle_i2c(dev, 0);
+ if (s & 0x00000002)
+ irq_handle_i2c(dev, 1);
+ if (s & 0x00000004)
+ irq_handle_i2c(dev, 2);
+ if (s & 0x00000008)
+ irq_handle_i2c(dev, 3);
+
+ if (s & 0x00000100)
+ tasklet_schedule(&dev->input[0].tasklet);
+ if (s & 0x00000200)
+ tasklet_schedule(&dev->input[1].tasklet);
+ if (s & 0x00000400)
+ tasklet_schedule(&dev->input[2].tasklet);
+ if (s & 0x00000800)
+ tasklet_schedule(&dev->input[3].tasklet);
+ if (s & 0x00001000)
+ tasklet_schedule(&dev->input[4].tasklet);
+ if (s & 0x00002000)
+ tasklet_schedule(&dev->input[5].tasklet);
+ if (s & 0x00004000)
+ tasklet_schedule(&dev->input[6].tasklet);
+ if (s & 0x00008000)
+ tasklet_schedule(&dev->input[7].tasklet);
+
+ if (s & 0x00010000)
+ tasklet_schedule(&dev->output[0].tasklet);
+ if (s & 0x00020000)
+ tasklet_schedule(&dev->output[1].tasklet);
+ if (s & 0x00040000)
+ tasklet_schedule(&dev->output[2].tasklet);
+ if (s & 0x00080000)
+ tasklet_schedule(&dev->output[3].tasklet);
+
+ /* if (s & 0x000f0000) printk(KERN_DEBUG "%08x\n", istat); */
+ } while ((s = ddbreadl(INTERRUPT_STATUS)));
+
+ return IRQ_HANDLED;
+}
+
+/******************************************************************************/
+/******************************************************************************/
+/******************************************************************************/
+
+static int flashio(struct ddb *dev, u8 *wbuf, u32 wlen, u8 *rbuf, u32 rlen)
+{
+ u32 data, shift;
+
+ if (wlen > 4)
+ ddbwritel(1, SPI_CONTROL);
+ while (wlen > 4) {
+ /* FIXME: check for big-endian */
+ data = swab32(*(u32 *)wbuf);
+ wbuf += 4;
+ wlen -= 4;
+ ddbwritel(data, SPI_DATA);
+ while (ddbreadl(SPI_CONTROL) & 0x0004)
+ ;
+ }
+
+ if (rlen)
+ ddbwritel(0x0001 | ((wlen << (8 + 3)) & 0x1f00), SPI_CONTROL);
+ else
+ ddbwritel(0x0003 | ((wlen << (8 + 3)) & 0x1f00), SPI_CONTROL);
+
+ data = 0;
+ shift = ((4 - wlen) * 8);
+ while (wlen) {
+ data <<= 8;
+ data |= *wbuf;
+ wlen--;
+ wbuf++;
+ }
+ if (shift)
+ data <<= shift;
+ ddbwritel(data, SPI_DATA);
+ while (ddbreadl(SPI_CONTROL) & 0x0004)
+ ;
+
+ if (!rlen) {
+ ddbwritel(0, SPI_CONTROL);
+ return 0;
+ }
+ if (rlen > 4)
+ ddbwritel(1, SPI_CONTROL);
+
+ while (rlen > 4) {
+ ddbwritel(0xffffffff, SPI_DATA);
+ while (ddbreadl(SPI_CONTROL) & 0x0004)
+ ;
+ data = ddbreadl(SPI_DATA);
+ *(u32 *) rbuf = swab32(data);
+ rbuf += 4;
+ rlen -= 4;
+ }
+ ddbwritel(0x0003 | ((rlen << (8 + 3)) & 0x1F00), SPI_CONTROL);
+ ddbwritel(0xffffffff, SPI_DATA);
+ while (ddbreadl(SPI_CONTROL) & 0x0004)
+ ;
+
+ data = ddbreadl(SPI_DATA);
+ ddbwritel(0, SPI_CONTROL);
+
+ if (rlen < 4)
+ data <<= ((4 - rlen) * 8);
+
+ while (rlen > 0) {
+ *rbuf = ((data >> 24) & 0xff);
+ data <<= 8;
+ rbuf++;
+ rlen--;
+ }
+ return 0;
+}
+
+#define DDB_MAGIC 'd'
+
+struct ddb_flashio {
+ __u8 *write_buf;
+ __u32 write_len;
+ __u8 *read_buf;
+ __u32 read_len;
+};
+
+#define IOCTL_DDB_FLASHIO _IOWR(DDB_MAGIC, 0x00, struct ddb_flashio)
+
+#define DDB_NAME "ddbridge"
+
+static u32 ddb_num;
+static struct ddb *ddbs[32];
+static struct class *ddb_class;
+static int ddb_major;
+
+static int ddb_open(struct inode *inode, struct file *file)
+{
+ struct ddb *dev = ddbs[iminor(inode)];
+
+ file->private_data = dev;
+ return 0;
+}
+
+static long ddb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct ddb *dev = file->private_data;
+ void *parg = (void *)arg;
+ int res;
+
+ switch (cmd) {
+ case IOCTL_DDB_FLASHIO:
+ {
+ struct ddb_flashio fio;
+ u8 *rbuf, *wbuf;
+
+ if (copy_from_user(&fio, parg, sizeof(fio)))
+ return -EFAULT;
+
+ if (fio.write_len > 1028 || fio.read_len > 1028)
+ return -EINVAL;
+ if (fio.write_len + fio.read_len > 1028)
+ return -EINVAL;
+
+ wbuf = &dev->iobuf[0];
+ rbuf = wbuf + fio.write_len;
+
+ if (copy_from_user(wbuf, fio.write_buf, fio.write_len))
+ return -EFAULT;
+ res = flashio(dev, wbuf, fio.write_len, rbuf, fio.read_len);
+ if (res)
+ return res;
+ if (copy_to_user(fio.read_buf, rbuf, fio.read_len))
+ return -EFAULT;
+ break;
+ }
+ default:
+ return -ENOTTY;
+ }
+ return 0;
+}
+
+static const struct file_operations ddb_fops = {
+ .unlocked_ioctl = ddb_ioctl,
+ .open = ddb_open,
+};
+
+static char *ddb_devnode(struct device *device, umode_t *mode)
+{
+ struct ddb *dev = dev_get_drvdata(device);
+
+ return kasprintf(GFP_KERNEL, "ddbridge/card%d", dev->nr);
+}
+
+static int ddb_class_create(void)
+{
+ ddb_major = register_chrdev(0, DDB_NAME, &ddb_fops);
+ if (ddb_major < 0)
+ return ddb_major;
+
+ ddb_class = class_create(THIS_MODULE, DDB_NAME);
+ if (IS_ERR(ddb_class)) {
+ unregister_chrdev(ddb_major, DDB_NAME);
+ return -1;
+ }
+ ddb_class->devnode = ddb_devnode;
+ return 0;
+}
+
+static void ddb_class_destroy(void)
+{
+ class_destroy(ddb_class);
+ unregister_chrdev(ddb_major, DDB_NAME);
+}
+
+static int ddb_device_create(struct ddb *dev)
+{
+ dev->nr = ddb_num++;
+ dev->ddb_dev = device_create(ddb_class, NULL,
+ MKDEV(ddb_major, dev->nr),
+ dev, "ddbridge%d", dev->nr);
+ ddbs[dev->nr] = dev;
+ if (IS_ERR(dev->ddb_dev))
+ return -1;
+ return 0;
+}
+
+static void ddb_device_destroy(struct ddb *dev)
+{
+ ddb_num--;
+ if (IS_ERR(dev->ddb_dev))
+ return;
+ device_destroy(ddb_class, MKDEV(ddb_major, 0));
+}
+
+
+/****************************************************************************/
+/****************************************************************************/
+/****************************************************************************/
+
+static void ddb_unmap(struct ddb *dev)
+{
+ if (dev->regs)
+ iounmap(dev->regs);
+ vfree(dev);
+}
+
+
+static void __devexit ddb_remove(struct pci_dev *pdev)
+{
+ struct ddb *dev = (struct ddb *) pci_get_drvdata(pdev);
+
+ ddb_ports_detach(dev);
+ ddb_i2c_release(dev);
+
+ ddbwritel(0, INTERRUPT_ENABLE);
+ free_irq(dev->pdev->irq, dev);
+#ifdef CONFIG_PCI_MSI
+ if (dev->msi)
+ pci_disable_msi(dev->pdev);
+#endif
+ ddb_ports_release(dev);
+ ddb_buffers_free(dev);
+ ddb_device_destroy(dev);
+
+ ddb_unmap(dev);
+ pci_set_drvdata(pdev, 0);
+ pci_disable_device(pdev);
+}
+
+
+static int __devinit ddb_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct ddb *dev;
+ int stat = 0;
+ int irq_flag = IRQF_SHARED;
+
+ if (pci_enable_device(pdev) < 0)
+ return -ENODEV;
+
+ dev = vmalloc(sizeof(struct ddb));
+ if (dev == NULL)
+ return -ENOMEM;
+ memset(dev, 0, sizeof(struct ddb));
+
+ dev->pdev = pdev;
+ pci_set_drvdata(pdev, dev);
+ dev->info = (struct ddb_info *) id->driver_data;
+ printk(KERN_INFO "DDBridge driver detected: %s\n", dev->info->name);
+
+ dev->regs = ioremap(pci_resource_start(dev->pdev, 0),
+ pci_resource_len(dev->pdev, 0));
+ if (!dev->regs) {
+ stat = -ENOMEM;
+ goto fail;
+ }
+ printk(KERN_INFO "HW %08x FW %08x\n", ddbreadl(0), ddbreadl(4));
+
+#ifdef CONFIG_PCI_MSI
+ if (pci_msi_enabled())
+ stat = pci_enable_msi(dev->pdev);
+ if (stat) {
+ printk(KERN_INFO ": MSI not available.\n");
+ } else {
+ irq_flag = 0;
+ dev->msi = 1;
+ }
+#endif
+ stat = request_irq(dev->pdev->irq, irq_handler,
+ irq_flag, "DDBridge", (void *) dev);
+ if (stat < 0)
+ goto fail1;
+ ddbwritel(0, DMA_BASE_WRITE);
+ ddbwritel(0, DMA_BASE_READ);
+ ddbwritel(0xffffffff, INTERRUPT_ACK);
+ ddbwritel(0xfff0f, INTERRUPT_ENABLE);
+ ddbwritel(0, MSI1_ENABLE);
+
+ if (ddb_i2c_init(dev) < 0)
+ goto fail1;
+ ddb_ports_init(dev);
+ if (ddb_buffers_alloc(dev) < 0) {
+ printk(KERN_INFO ": Could not allocate buffer memory\n");
+ goto fail2;
+ }
+ if (ddb_ports_attach(dev) < 0)
+ goto fail3;
+ ddb_device_create(dev);
+ return 0;
+
+fail3:
+ ddb_ports_detach(dev);
+ printk(KERN_ERR "fail3\n");
+ ddb_ports_release(dev);
+fail2:
+ printk(KERN_ERR "fail2\n");
+ ddb_buffers_free(dev);
+fail1:
+ printk(KERN_ERR "fail1\n");
+ if (dev->msi)
+ pci_disable_msi(dev->pdev);
+ free_irq(dev->pdev->irq, dev);
+fail:
+ printk(KERN_ERR "fail\n");
+ ddb_unmap(dev);
+ pci_set_drvdata(pdev, 0);
+ pci_disable_device(pdev);
+ return -1;
+}
+
+/******************************************************************************/
+/******************************************************************************/
+/******************************************************************************/
+
+static struct ddb_info ddb_none = {
+ .type = DDB_NONE,
+ .name = "Digital Devices PCIe bridge",
+};
+
+static struct ddb_info ddb_octopus = {
+ .type = DDB_OCTOPUS,
+ .name = "Digital Devices Octopus DVB adapter",
+ .port_num = 4,
+};
+
+static struct ddb_info ddb_octopus_le = {
+ .type = DDB_OCTOPUS,
+ .name = "Digital Devices Octopus LE DVB adapter",
+ .port_num = 2,
+};
+
+static struct ddb_info ddb_v6 = {
+ .type = DDB_OCTOPUS,
+ .name = "Digital Devices Cine S2 V6 DVB adapter",
+ .port_num = 3,
+};
+
+#define DDVID 0xdd01 /* Digital Devices Vendor ID */
+
+#define DDB_ID(_vend, _dev, _subvend, _subdev, _driverdata) { \
+ .vendor = _vend, .device = _dev, \
+ .subvendor = _subvend, .subdevice = _subdev, \
+ .driver_data = (unsigned long)&_driverdata }
+
+static const struct pci_device_id ddb_id_tbl[] __devinitdata = {
+ DDB_ID(DDVID, 0x0002, DDVID, 0x0001, ddb_octopus),
+ DDB_ID(DDVID, 0x0003, DDVID, 0x0001, ddb_octopus),
+ DDB_ID(DDVID, 0x0003, DDVID, 0x0002, ddb_octopus_le),
+ DDB_ID(DDVID, 0x0003, DDVID, 0x0010, ddb_octopus),
+ DDB_ID(DDVID, 0x0003, DDVID, 0x0020, ddb_v6),
+ /* in case sub-ids got deleted in flash */
+ DDB_ID(DDVID, 0x0003, PCI_ANY_ID, PCI_ANY_ID, ddb_none),
+ {0}
+};
+MODULE_DEVICE_TABLE(pci, ddb_id_tbl);
+
+
+static struct pci_driver ddb_pci_driver = {
+ .name = "DDBridge",
+ .id_table = ddb_id_tbl,
+ .probe = ddb_probe,
+ .remove = __devexit_p(ddb_remove),
+};
+
+static __init int module_init_ddbridge(void)
+{
+ printk(KERN_INFO "Digital Devices PCIE bridge driver, "
+ "Copyright (C) 2010-11 Digital Devices GmbH\n");
+ if (ddb_class_create())
+ return -1;
+ return pci_register_driver(&ddb_pci_driver);
+}
+
+static __exit void module_exit_ddbridge(void)
+{
+ pci_unregister_driver(&ddb_pci_driver);
+ ddb_class_destroy();
+}
+
+module_init(module_init_ddbridge);
+module_exit(module_exit_ddbridge);
+
+MODULE_DESCRIPTION("Digital Devices PCIe Bridge");
+MODULE_AUTHOR("Ralph Metzler");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.5");
diff --git a/drivers/media/pci/ddbridge/ddbridge-regs.h b/drivers/media/pci/ddbridge/ddbridge-regs.h
new file mode 100644
index 000000000000..a3ccb318b500
--- /dev/null
+++ b/drivers/media/pci/ddbridge/ddbridge-regs.h
@@ -0,0 +1,151 @@
+/*
+ * ddbridge-regs.h: Digital Devices PCIe bridge driver
+ *
+ * Copyright (C) 2010-2011 Digital Devices GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 only, as published by the Free Software Foundation.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ */
+
+/* DD-DVBBridgeV1.h 273 2010-09-17 05:03:16Z manfred */
+
+/* Register Definitions */
+
+#define CUR_REGISTERMAP_VERSION 0x10000
+
+#define HARDWARE_VERSION 0x00
+#define REGISTERMAP_VERSION 0x04
+
+/* ------------------------------------------------------------------------- */
+/* SPI Controller */
+
+#define SPI_CONTROL 0x10
+#define SPI_DATA 0x14
+
+/* ------------------------------------------------------------------------- */
+
+/* Interrupt controller */
+/* How many MSI's are available depends on HW (Min 2 max 8) */
+/* How many are usable also depends on Host platform */
+
+#define INTERRUPT_BASE (0x40)
+
+#define INTERRUPT_ENABLE (INTERRUPT_BASE + 0x00)
+#define MSI0_ENABLE (INTERRUPT_BASE + 0x00)
+#define MSI1_ENABLE (INTERRUPT_BASE + 0x04)
+#define MSI2_ENABLE (INTERRUPT_BASE + 0x08)
+#define MSI3_ENABLE (INTERRUPT_BASE + 0x0C)
+#define MSI4_ENABLE (INTERRUPT_BASE + 0x10)
+#define MSI5_ENABLE (INTERRUPT_BASE + 0x14)
+#define MSI6_ENABLE (INTERRUPT_BASE + 0x18)
+#define MSI7_ENABLE (INTERRUPT_BASE + 0x1C)
+
+#define INTERRUPT_STATUS (INTERRUPT_BASE + 0x20)
+#define INTERRUPT_ACK (INTERRUPT_BASE + 0x20)
+
+#define INTMASK_I2C1 (0x00000001)
+#define INTMASK_I2C2 (0x00000002)
+#define INTMASK_I2C3 (0x00000004)
+#define INTMASK_I2C4 (0x00000008)
+
+#define INTMASK_CIRQ1 (0x00000010)
+#define INTMASK_CIRQ2 (0x00000020)
+#define INTMASK_CIRQ3 (0x00000040)
+#define INTMASK_CIRQ4 (0x00000080)
+
+#define INTMASK_TSINPUT1 (0x00000100)
+#define INTMASK_TSINPUT2 (0x00000200)
+#define INTMASK_TSINPUT3 (0x00000400)
+#define INTMASK_TSINPUT4 (0x00000800)
+#define INTMASK_TSINPUT5 (0x00001000)
+#define INTMASK_TSINPUT6 (0x00002000)
+#define INTMASK_TSINPUT7 (0x00004000)
+#define INTMASK_TSINPUT8 (0x00008000)
+
+#define INTMASK_TSOUTPUT1 (0x00010000)
+#define INTMASK_TSOUTPUT2 (0x00020000)
+#define INTMASK_TSOUTPUT3 (0x00040000)
+#define INTMASK_TSOUTPUT4 (0x00080000)
+
+/* ------------------------------------------------------------------------- */
+/* I2C Master Controller */
+
+#define I2C_BASE (0x80) /* Byte offset */
+
+#define I2C_COMMAND (0x00)
+#define I2C_TIMING (0x04)
+#define I2C_TASKLENGTH (0x08) /* High read, low write */
+#define I2C_TASKADDRESS (0x0C) /* High read, low write */
+
+#define I2C_MONITOR (0x1C)
+
+#define I2C_BASE_1 (I2C_BASE + 0x00)
+#define I2C_BASE_2 (I2C_BASE + 0x20)
+#define I2C_BASE_3 (I2C_BASE + 0x40)
+#define I2C_BASE_4 (I2C_BASE + 0x60)
+
+#define I2C_BASE_N(i) (I2C_BASE + (i) * 0x20)
+
+#define I2C_TASKMEM_BASE (0x1000) /* Byte offset */
+#define I2C_TASKMEM_SIZE (0x1000)
+
+#define I2C_SPEED_400 (0x04030404)
+#define I2C_SPEED_200 (0x09080909)
+#define I2C_SPEED_154 (0x0C0B0C0C)
+#define I2C_SPEED_100 (0x13121313)
+#define I2C_SPEED_77 (0x19181919)
+#define I2C_SPEED_50 (0x27262727)
+
+
+/* ------------------------------------------------------------------------- */
+/* DMA Controller */
+
+#define DMA_BASE_WRITE (0x100)
+#define DMA_BASE_READ (0x140)
+
+#define DMA_CONTROL (0x00) /* 64 */
+#define DMA_ERROR (0x04) /* 65 ( only read instance ) */
+
+#define DMA_DIAG_CONTROL (0x1C) /* 71 */
+#define DMA_DIAG_PACKETCOUNTER_LOW (0x20) /* 72 */
+#define DMA_DIAG_PACKETCOUNTER_HIGH (0x24) /* 73 */
+#define DMA_DIAG_TIMECOUNTER_LOW (0x28) /* 74 */
+#define DMA_DIAG_TIMECOUNTER_HIGH (0x2C) /* 75 */
+#define DMA_DIAG_RECHECKCOUNTER (0x30) /* 76 ( Split completions on read ) */
+#define DMA_DIAG_WAITTIMEOUTINIT (0x34) /* 77 */
+#define DMA_DIAG_WAITOVERFLOWCOUNTER (0x38) /* 78 */
+#define DMA_DIAG_WAITCOUNTER (0x3C) /* 79 */
+
+/* ------------------------------------------------------------------------- */
+/* DMA Buffer */
+
+#define TS_INPUT_BASE (0x200)
+#define TS_INPUT_CONTROL(i) (TS_INPUT_BASE + (i) * 16 + 0x00)
+
+#define TS_OUTPUT_BASE (0x280)
+#define TS_OUTPUT_CONTROL(i) (TS_OUTPUT_BASE + (i) * 16 + 0x00)
+
+#define DMA_BUFFER_BASE (0x300)
+
+#define DMA_BUFFER_CONTROL(i) (DMA_BUFFER_BASE + (i) * 16 + 0x00)
+#define DMA_BUFFER_ACK(i) (DMA_BUFFER_BASE + (i) * 16 + 0x04)
+#define DMA_BUFFER_CURRENT(i) (DMA_BUFFER_BASE + (i) * 16 + 0x08)
+#define DMA_BUFFER_SIZE(i) (DMA_BUFFER_BASE + (i) * 16 + 0x0c)
+
+#define DMA_BASE_ADDRESS_TABLE (0x2000)
+#define DMA_BASE_ADDRESS_TABLE_ENTRIES (512)
+
diff --git a/drivers/media/pci/ddbridge/ddbridge.h b/drivers/media/pci/ddbridge/ddbridge.h
new file mode 100644
index 000000000000..8b1b41d2a52d
--- /dev/null
+++ b/drivers/media/pci/ddbridge/ddbridge.h
@@ -0,0 +1,185 @@
+/*
+ * ddbridge.h: Digital Devices PCIe bridge driver
+ *
+ * Copyright (C) 2010-2011 Digital Devices GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 only, as published by the Free Software Foundation.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef _DDBRIDGE_H_
+#define _DDBRIDGE_H_
+
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <asm/dma.h>
+#include <linux/dvb/frontend.h>
+#include <linux/dvb/ca.h>
+#include <linux/socket.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_ringbuffer.h"
+#include "dvb_ca_en50221.h"
+#include "dvb_net.h"
+#include "cxd2099.h"
+
+#define DDB_MAX_I2C 4
+#define DDB_MAX_PORT 4
+#define DDB_MAX_INPUT 8
+#define DDB_MAX_OUTPUT 4
+
+struct ddb_info {
+ int type;
+#define DDB_NONE 0
+#define DDB_OCTOPUS 1
+ char *name;
+ int port_num;
+ u32 port_type[DDB_MAX_PORT];
+};
+
+/* DMA_SIZE MUST be divisible by 188 and 128 !!! */
+
+#define INPUT_DMA_MAX_BUFS 32 /* hardware table limit */
+#define INPUT_DMA_BUFS 8
+#define INPUT_DMA_SIZE (128*47*21)
+
+#define OUTPUT_DMA_MAX_BUFS 32
+#define OUTPUT_DMA_BUFS 8
+#define OUTPUT_DMA_SIZE (128*47*21)
+
+struct ddb;
+struct ddb_port;
+
+struct ddb_input {
+ struct ddb_port *port;
+ u32 nr;
+ int attached;
+
+ dma_addr_t pbuf[INPUT_DMA_MAX_BUFS];
+ u8 *vbuf[INPUT_DMA_MAX_BUFS];
+ u32 dma_buf_num;
+ u32 dma_buf_size;
+
+ struct tasklet_struct tasklet;
+ spinlock_t lock;
+ wait_queue_head_t wq;
+ int running;
+ u32 stat;
+ u32 cbuf;
+ u32 coff;
+
+ struct dvb_adapter adap;
+ struct dvb_device *dev;
+ struct dvb_frontend *fe;
+ struct dvb_frontend *fe2;
+ struct dmxdev dmxdev;
+ struct dvb_demux demux;
+ struct dvb_net dvbnet;
+ struct dmx_frontend hw_frontend;
+ struct dmx_frontend mem_frontend;
+ int users;
+ int (*gate_ctrl)(struct dvb_frontend *, int);
+};
+
+struct ddb_output {
+ struct ddb_port *port;
+ u32 nr;
+ dma_addr_t pbuf[OUTPUT_DMA_MAX_BUFS];
+ u8 *vbuf[OUTPUT_DMA_MAX_BUFS];
+ u32 dma_buf_num;
+ u32 dma_buf_size;
+ struct tasklet_struct tasklet;
+ spinlock_t lock;
+ wait_queue_head_t wq;
+ int running;
+ u32 stat;
+ u32 cbuf;
+ u32 coff;
+
+ struct dvb_adapter adap;
+ struct dvb_device *dev;
+};
+
+struct ddb_i2c {
+ struct ddb *dev;
+ u32 nr;
+ struct i2c_adapter adap;
+ struct i2c_adapter adap2;
+ u32 regs;
+ u32 rbuf;
+ u32 wbuf;
+ int done;
+ wait_queue_head_t wq;
+};
+
+struct ddb_port {
+ struct ddb *dev;
+ u32 nr;
+ struct ddb_i2c *i2c;
+ struct mutex i2c_gate_lock;
+ u32 class;
+#define DDB_PORT_NONE 0
+#define DDB_PORT_CI 1
+#define DDB_PORT_TUNER 2
+ u32 type;
+#define DDB_TUNER_NONE 0
+#define DDB_TUNER_DVBS_ST 1
+#define DDB_TUNER_DVBS_ST_AA 2
+#define DDB_TUNER_DVBCT_TR 16
+#define DDB_TUNER_DVBCT_ST 17
+ u32 adr;
+
+ struct ddb_input *input[2];
+ struct ddb_output *output;
+ struct dvb_ca_en50221 *en;
+};
+
+struct ddb {
+ struct pci_dev *pdev;
+ unsigned char *regs;
+ struct ddb_port port[DDB_MAX_PORT];
+ struct ddb_i2c i2c[DDB_MAX_I2C];
+ struct ddb_input input[DDB_MAX_INPUT];
+ struct ddb_output output[DDB_MAX_OUTPUT];
+
+ struct device *ddb_dev;
+ int nr;
+ u8 iobuf[1028];
+
+ struct ddb_info *info;
+ int msi;
+};
+
+/****************************************************************************/
+
+#define ddbwritel(_val, _adr) writel((_val), \
+ (char *) (dev->regs+(_adr)))
+#define ddbreadl(_adr) readl((char *) (dev->regs+(_adr)))
+#define ddbcpyto(_adr, _src, _count) memcpy_toio((char *) \
+ (dev->regs+(_adr)), (_src), (_count))
+#define ddbcpyfrom(_dst, _adr, _count) memcpy_fromio((_dst), (char *) \
+ (dev->regs+(_adr)), (_count))
+
+/****************************************************************************/
+
+#endif
diff --git a/drivers/media/pci/dm1105/Kconfig b/drivers/media/pci/dm1105/Kconfig
new file mode 100644
index 000000000000..f3de0a4d63f2
--- /dev/null
+++ b/drivers/media/pci/dm1105/Kconfig
@@ -0,0 +1,20 @@
+config DVB_DM1105
+ tristate "SDMC DM1105 based PCI cards"
+ depends on DVB_CORE && PCI && I2C
+ select DVB_PLL if !DVB_FE_CUSTOMISE
+ select DVB_STV0299 if !DVB_FE_CUSTOMISE
+ select DVB_STV0288 if !DVB_FE_CUSTOMISE
+ select DVB_STB6000 if !DVB_FE_CUSTOMISE
+ select DVB_CX24116 if !DVB_FE_CUSTOMISE
+ select DVB_SI21XX if !DVB_FE_CUSTOMISE
+ select DVB_DS3000 if !DVB_FE_CUSTOMISE
+ depends on RC_CORE
+ help
+ Support for cards based on the SDMC DM1105 PCI chip like
+ DvbWorld 2002
+
+ Since these cards have no MPEG decoder onboard, they transmit
+ only compressed MPEG data over the PCI bus, so you need
+ an external software decoder to watch TV on your computer.
+
+ Say Y or M if you own such a device and want to use it.
diff --git a/drivers/media/pci/dm1105/Makefile b/drivers/media/pci/dm1105/Makefile
new file mode 100644
index 000000000000..327585143c83
--- /dev/null
+++ b/drivers/media/pci/dm1105/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_DVB_DM1105) += dm1105.o
+
+ccflags-y += -Idrivers/media/dvb-core/ -Idrivers/media/dvb-frontends
diff --git a/drivers/media/pci/dm1105/dm1105.c b/drivers/media/pci/dm1105/dm1105.c
new file mode 100644
index 000000000000..a609b3a9b146
--- /dev/null
+++ b/drivers/media/pci/dm1105/dm1105.c
@@ -0,0 +1,1248 @@
+/*
+ * dm1105.c - driver for DVB cards based on SDMC DM1105 PCI chip
+ *
+ * Copyright (C) 2008 Igor M. Liplianin <liplianin@me.by>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/proc_fs.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <media/rc-core.h>
+
+#include "demux.h"
+#include "dmxdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+#include "dvbdev.h"
+#include "dvb-pll.h"
+
+#include "stv0299.h"
+#include "stv0288.h"
+#include "stb6000.h"
+#include "si21xx.h"
+#include "cx24116.h"
+#include "z0194a.h"
+#include "ds3000.h"
+
+#define MODULE_NAME "dm1105"
+
+#define UNSET (-1U)
+
+#define DM1105_BOARD_NOAUTO UNSET
+#define DM1105_BOARD_UNKNOWN 0
+#define DM1105_BOARD_DVBWORLD_2002 1
+#define DM1105_BOARD_DVBWORLD_2004 2
+#define DM1105_BOARD_AXESS_DM05 3
+#define DM1105_BOARD_UNBRANDED_I2C_ON_GPIO 4
+
+/* ----------------------------------------------- */
+/*
+ * PCI ID's
+ */
+#ifndef PCI_VENDOR_ID_TRIGEM
+#define PCI_VENDOR_ID_TRIGEM 0x109f
+#endif
+#ifndef PCI_VENDOR_ID_AXESS
+#define PCI_VENDOR_ID_AXESS 0x195d
+#endif
+#ifndef PCI_DEVICE_ID_DM1105
+#define PCI_DEVICE_ID_DM1105 0x036f
+#endif
+#ifndef PCI_DEVICE_ID_DW2002
+#define PCI_DEVICE_ID_DW2002 0x2002
+#endif
+#ifndef PCI_DEVICE_ID_DW2004
+#define PCI_DEVICE_ID_DW2004 0x2004
+#endif
+#ifndef PCI_DEVICE_ID_DM05
+#define PCI_DEVICE_ID_DM05 0x1105
+#endif
+/* ----------------------------------------------- */
+/* sdmc dm1105 registers */
+
+/* TS Control */
+#define DM1105_TSCTR 0x00
+#define DM1105_DTALENTH 0x04
+
+/* GPIO Interface */
+#define DM1105_GPIOVAL 0x08
+#define DM1105_GPIOCTR 0x0c
+
+/* PID serial number */
+#define DM1105_PIDN 0x10
+
+/* Odd-even secret key select */
+#define DM1105_CWSEL 0x14
+
+/* Host Command Interface */
+#define DM1105_HOST_CTR 0x18
+#define DM1105_HOST_AD 0x1c
+
+/* PCI Interface */
+#define DM1105_CR 0x30
+#define DM1105_RST 0x34
+#define DM1105_STADR 0x38
+#define DM1105_RLEN 0x3c
+#define DM1105_WRP 0x40
+#define DM1105_INTCNT 0x44
+#define DM1105_INTMAK 0x48
+#define DM1105_INTSTS 0x4c
+
+/* CW Value */
+#define DM1105_ODD 0x50
+#define DM1105_EVEN 0x58
+
+/* PID Value */
+#define DM1105_PID 0x60
+
+/* IR Control */
+#define DM1105_IRCTR 0x64
+#define DM1105_IRMODE 0x68
+#define DM1105_SYSTEMCODE 0x6c
+#define DM1105_IRCODE 0x70
+
+/* Unknown Values */
+#define DM1105_ENCRYPT 0x74
+#define DM1105_VER 0x7c
+
+/* I2C Interface */
+#define DM1105_I2CCTR 0x80
+#define DM1105_I2CSTS 0x81
+#define DM1105_I2CDAT 0x82
+#define DM1105_I2C_RA 0x83
+/* ----------------------------------------------- */
+/* Interrupt Mask Bits */
+
+#define INTMAK_TSIRQM 0x01
+#define INTMAK_HIRQM 0x04
+#define INTMAK_IRM 0x08
+#define INTMAK_ALLMASK (INTMAK_TSIRQM | \
+ INTMAK_HIRQM | \
+ INTMAK_IRM)
+#define INTMAK_NONEMASK 0x00
+
+/* Interrupt Status Bits */
+#define INTSTS_TSIRQ 0x01
+#define INTSTS_HIRQ 0x04
+#define INTSTS_IR 0x08
+
+/* IR Control Bits */
+#define DM1105_IR_EN 0x01
+#define DM1105_SYS_CHK 0x02
+#define DM1105_REP_FLG 0x08
+
+/* EEPROM addr */
+#define IIC_24C01_addr 0xa0
+/* Max board count */
+#define DM1105_MAX 0x04
+
+#define DRIVER_NAME "dm1105"
+#define DM1105_I2C_GPIO_NAME "dm1105-gpio"
+
+#define DM1105_DMA_PACKETS 47
+#define DM1105_DMA_PACKET_LENGTH (128*4)
+#define DM1105_DMA_BYTES (128 * 4 * DM1105_DMA_PACKETS)
+
+/* */
+#define GPIO08 (1 << 8)
+#define GPIO13 (1 << 13)
+#define GPIO14 (1 << 14)
+#define GPIO15 (1 << 15)
+#define GPIO16 (1 << 16)
+#define GPIO17 (1 << 17)
+#define GPIO_ALL 0x03ffff
+
+/* GPIO's for LNB power control */
+#define DM1105_LNB_MASK (GPIO_ALL & ~(GPIO14 | GPIO13))
+#define DM1105_LNB_OFF GPIO17
+#define DM1105_LNB_13V (GPIO16 | GPIO08)
+#define DM1105_LNB_18V GPIO08
+
+/* GPIO's for LNB power control for Axess DM05 */
+#define DM05_LNB_MASK (GPIO_ALL & ~(GPIO14 | GPIO13))
+#define DM05_LNB_OFF GPIO17/* actually 13v */
+#define DM05_LNB_13V GPIO17
+#define DM05_LNB_18V (GPIO17 | GPIO16)
+
+/* GPIO's for LNB power control for unbranded with I2C on GPIO */
+#define UNBR_LNB_MASK (GPIO17 | GPIO16)
+#define UNBR_LNB_OFF 0
+#define UNBR_LNB_13V GPIO17
+#define UNBR_LNB_18V (GPIO17 | GPIO16)
+
+static unsigned int card[] = {[0 ... 3] = UNSET };
+module_param_array(card, int, NULL, 0444);
+MODULE_PARM_DESC(card, "card type");
+
+static int ir_debug;
+module_param(ir_debug, int, 0644);
+MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding");
+
+static unsigned int dm1105_devcount;
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+struct dm1105_board {
+ char *name;
+ struct {
+ u32 mask, off, v13, v18;
+ } lnb;
+ u32 gpio_scl, gpio_sda;
+};
+
+struct dm1105_subid {
+ u16 subvendor;
+ u16 subdevice;
+ u32 card;
+};
+
+static const struct dm1105_board dm1105_boards[] = {
+ [DM1105_BOARD_UNKNOWN] = {
+ .name = "UNKNOWN/GENERIC",
+ .lnb = {
+ .mask = DM1105_LNB_MASK,
+ .off = DM1105_LNB_OFF,
+ .v13 = DM1105_LNB_13V,
+ .v18 = DM1105_LNB_18V,
+ },
+ },
+ [DM1105_BOARD_DVBWORLD_2002] = {
+ .name = "DVBWorld PCI 2002",
+ .lnb = {
+ .mask = DM1105_LNB_MASK,
+ .off = DM1105_LNB_OFF,
+ .v13 = DM1105_LNB_13V,
+ .v18 = DM1105_LNB_18V,
+ },
+ },
+ [DM1105_BOARD_DVBWORLD_2004] = {
+ .name = "DVBWorld PCI 2004",
+ .lnb = {
+ .mask = DM1105_LNB_MASK,
+ .off = DM1105_LNB_OFF,
+ .v13 = DM1105_LNB_13V,
+ .v18 = DM1105_LNB_18V,
+ },
+ },
+ [DM1105_BOARD_AXESS_DM05] = {
+ .name = "Axess/EasyTv DM05",
+ .lnb = {
+ .mask = DM05_LNB_MASK,
+ .off = DM05_LNB_OFF,
+ .v13 = DM05_LNB_13V,
+ .v18 = DM05_LNB_18V,
+ },
+ },
+ [DM1105_BOARD_UNBRANDED_I2C_ON_GPIO] = {
+ .name = "Unbranded DM1105 with i2c on GPIOs",
+ .lnb = {
+ .mask = UNBR_LNB_MASK,
+ .off = UNBR_LNB_OFF,
+ .v13 = UNBR_LNB_13V,
+ .v18 = UNBR_LNB_18V,
+ },
+ .gpio_scl = GPIO14,
+ .gpio_sda = GPIO13,
+ },
+};
+
+static const struct dm1105_subid dm1105_subids[] = {
+ {
+ .subvendor = 0x0000,
+ .subdevice = 0x2002,
+ .card = DM1105_BOARD_DVBWORLD_2002,
+ }, {
+ .subvendor = 0x0001,
+ .subdevice = 0x2002,
+ .card = DM1105_BOARD_DVBWORLD_2002,
+ }, {
+ .subvendor = 0x0000,
+ .subdevice = 0x2004,
+ .card = DM1105_BOARD_DVBWORLD_2004,
+ }, {
+ .subvendor = 0x0001,
+ .subdevice = 0x2004,
+ .card = DM1105_BOARD_DVBWORLD_2004,
+ }, {
+ .subvendor = 0x195d,
+ .subdevice = 0x1105,
+ .card = DM1105_BOARD_AXESS_DM05,
+ },
+};
+
+static void dm1105_card_list(struct pci_dev *pci)
+{
+ int i;
+
+ if (0 == pci->subsystem_vendor &&
+ 0 == pci->subsystem_device) {
+ printk(KERN_ERR
+ "dm1105: Your board has no valid PCI Subsystem ID\n"
+ "dm1105: and thus can't be autodetected\n"
+ "dm1105: Please pass card=<n> insmod option to\n"
+ "dm1105: workaround that. Redirect complaints to\n"
+ "dm1105: the vendor of the TV card. Best regards,\n"
+ "dm1105: -- tux\n");
+ } else {
+ printk(KERN_ERR
+ "dm1105: Your board isn't known (yet) to the driver.\n"
+ "dm1105: You can try to pick one of the existing\n"
+ "dm1105: card configs via card=<n> insmod option.\n"
+ "dm1105: Updating to the latest version might help\n"
+ "dm1105: as well.\n");
+ }
+ printk(KERN_ERR "Here is a list of valid choices for the card=<n> "
+ "insmod option:\n");
+ for (i = 0; i < ARRAY_SIZE(dm1105_boards); i++)
+ printk(KERN_ERR "dm1105: card=%d -> %s\n",
+ i, dm1105_boards[i].name);
+}
+
+/* infrared remote control */
+struct infrared {
+ struct rc_dev *dev;
+ char input_phys[32];
+ struct work_struct work;
+ u32 ir_command;
+};
+
+struct dm1105_dev {
+ /* pci */
+ struct pci_dev *pdev;
+ u8 __iomem *io_mem;
+
+ /* ir */
+ struct infrared ir;
+
+ /* dvb */
+ struct dmx_frontend hw_frontend;
+ struct dmx_frontend mem_frontend;
+ struct dmxdev dmxdev;
+ struct dvb_adapter dvb_adapter;
+ struct dvb_demux demux;
+ struct dvb_frontend *fe;
+ struct dvb_net dvbnet;
+ unsigned int full_ts_users;
+ unsigned int boardnr;
+ int nr;
+
+ /* i2c */
+ struct i2c_adapter i2c_adap;
+ struct i2c_adapter i2c_bb_adap;
+ struct i2c_algo_bit_data i2c_bit;
+
+ /* irq */
+ struct work_struct work;
+ struct workqueue_struct *wq;
+ char wqn[16];
+
+ /* dma */
+ dma_addr_t dma_addr;
+ unsigned char *ts_buf;
+ u32 wrp;
+ u32 nextwrp;
+ u32 buffer_size;
+ unsigned int PacketErrorCount;
+ unsigned int dmarst;
+ spinlock_t lock;
+};
+
+#define dm_io_mem(reg) ((unsigned long)(&dev->io_mem[reg]))
+
+#define dm_readb(reg) inb(dm_io_mem(reg))
+#define dm_writeb(reg, value) outb((value), (dm_io_mem(reg)))
+
+#define dm_readw(reg) inw(dm_io_mem(reg))
+#define dm_writew(reg, value) outw((value), (dm_io_mem(reg)))
+
+#define dm_readl(reg) inl(dm_io_mem(reg))
+#define dm_writel(reg, value) outl((value), (dm_io_mem(reg)))
+
+#define dm_andorl(reg, mask, value) \
+ outl((inl(dm_io_mem(reg)) & ~(mask)) |\
+ ((value) & (mask)), (dm_io_mem(reg)))
+
+#define dm_setl(reg, bit) dm_andorl((reg), (bit), (bit))
+#define dm_clearl(reg, bit) dm_andorl((reg), (bit), 0)
+
+/* The chip has 18 GPIOs. In HOST mode GPIO's used as 15 bit address lines,
+ so we can use only 3 GPIO's from GPIO15 to GPIO17.
+ Here I don't check whether HOST is enebled as it is not implemented yet.
+ */
+static void dm1105_gpio_set(struct dm1105_dev *dev, u32 mask)
+{
+ if (mask & 0xfffc0000)
+ printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__);
+
+ if (mask & 0x0003ffff)
+ dm_setl(DM1105_GPIOVAL, mask & 0x0003ffff);
+
+}
+
+static void dm1105_gpio_clear(struct dm1105_dev *dev, u32 mask)
+{
+ if (mask & 0xfffc0000)
+ printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__);
+
+ if (mask & 0x0003ffff)
+ dm_clearl(DM1105_GPIOVAL, mask & 0x0003ffff);
+
+}
+
+static void dm1105_gpio_andor(struct dm1105_dev *dev, u32 mask, u32 val)
+{
+ if (mask & 0xfffc0000)
+ printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__);
+
+ if (mask & 0x0003ffff)
+ dm_andorl(DM1105_GPIOVAL, mask & 0x0003ffff, val);
+
+}
+
+static u32 dm1105_gpio_get(struct dm1105_dev *dev, u32 mask)
+{
+ if (mask & 0xfffc0000)
+ printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__);
+
+ if (mask & 0x0003ffff)
+ return dm_readl(DM1105_GPIOVAL) & mask & 0x0003ffff;
+
+ return 0;
+}
+
+static void dm1105_gpio_enable(struct dm1105_dev *dev, u32 mask, int asoutput)
+{
+ if (mask & 0xfffc0000)
+ printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__);
+
+ if ((mask & 0x0003ffff) && asoutput)
+ dm_clearl(DM1105_GPIOCTR, mask & 0x0003ffff);
+ else if ((mask & 0x0003ffff) && !asoutput)
+ dm_setl(DM1105_GPIOCTR, mask & 0x0003ffff);
+
+}
+
+static void dm1105_setline(struct dm1105_dev *dev, u32 line, int state)
+{
+ if (state)
+ dm1105_gpio_enable(dev, line, 0);
+ else {
+ dm1105_gpio_enable(dev, line, 1);
+ dm1105_gpio_clear(dev, line);
+ }
+}
+
+static void dm1105_setsda(void *data, int state)
+{
+ struct dm1105_dev *dev = data;
+
+ dm1105_setline(dev, dm1105_boards[dev->boardnr].gpio_sda, state);
+}
+
+static void dm1105_setscl(void *data, int state)
+{
+ struct dm1105_dev *dev = data;
+
+ dm1105_setline(dev, dm1105_boards[dev->boardnr].gpio_scl, state);
+}
+
+static int dm1105_getsda(void *data)
+{
+ struct dm1105_dev *dev = data;
+
+ return dm1105_gpio_get(dev, dm1105_boards[dev->boardnr].gpio_sda)
+ ? 1 : 0;
+}
+
+static int dm1105_getscl(void *data)
+{
+ struct dm1105_dev *dev = data;
+
+ return dm1105_gpio_get(dev, dm1105_boards[dev->boardnr].gpio_scl)
+ ? 1 : 0;
+}
+
+static int dm1105_i2c_xfer(struct i2c_adapter *i2c_adap,
+ struct i2c_msg *msgs, int num)
+{
+ struct dm1105_dev *dev ;
+
+ int addr, rc, i, j, k, len, byte, data;
+ u8 status;
+
+ dev = i2c_adap->algo_data;
+ for (i = 0; i < num; i++) {
+ dm_writeb(DM1105_I2CCTR, 0x00);
+ if (msgs[i].flags & I2C_M_RD) {
+ /* read bytes */
+ addr = msgs[i].addr << 1;
+ addr |= 1;
+ dm_writeb(DM1105_I2CDAT, addr);
+ for (byte = 0; byte < msgs[i].len; byte++)
+ dm_writeb(DM1105_I2CDAT + byte + 1, 0);
+
+ dm_writeb(DM1105_I2CCTR, 0x81 + msgs[i].len);
+ for (j = 0; j < 55; j++) {
+ mdelay(10);
+ status = dm_readb(DM1105_I2CSTS);
+ if ((status & 0xc0) == 0x40)
+ break;
+ }
+ if (j >= 55)
+ return -1;
+
+ for (byte = 0; byte < msgs[i].len; byte++) {
+ rc = dm_readb(DM1105_I2CDAT + byte + 1);
+ if (rc < 0)
+ goto err;
+ msgs[i].buf[byte] = rc;
+ }
+ } else if ((msgs[i].buf[0] == 0xf7) && (msgs[i].addr == 0x55)) {
+ /* prepaired for cx24116 firmware */
+ /* Write in small blocks */
+ len = msgs[i].len - 1;
+ k = 1;
+ do {
+ dm_writeb(DM1105_I2CDAT, msgs[i].addr << 1);
+ dm_writeb(DM1105_I2CDAT + 1, 0xf7);
+ for (byte = 0; byte < (len > 48 ? 48 : len); byte++) {
+ data = msgs[i].buf[k + byte];
+ dm_writeb(DM1105_I2CDAT + byte + 2, data);
+ }
+ dm_writeb(DM1105_I2CCTR, 0x82 + (len > 48 ? 48 : len));
+ for (j = 0; j < 25; j++) {
+ mdelay(10);
+ status = dm_readb(DM1105_I2CSTS);
+ if ((status & 0xc0) == 0x40)
+ break;
+ }
+
+ if (j >= 25)
+ return -1;
+
+ k += 48;
+ len -= 48;
+ } while (len > 0);
+ } else {
+ /* write bytes */
+ dm_writeb(DM1105_I2CDAT, msgs[i].addr << 1);
+ for (byte = 0; byte < msgs[i].len; byte++) {
+ data = msgs[i].buf[byte];
+ dm_writeb(DM1105_I2CDAT + byte + 1, data);
+ }
+ dm_writeb(DM1105_I2CCTR, 0x81 + msgs[i].len);
+ for (j = 0; j < 25; j++) {
+ mdelay(10);
+ status = dm_readb(DM1105_I2CSTS);
+ if ((status & 0xc0) == 0x40)
+ break;
+ }
+
+ if (j >= 25)
+ return -1;
+ }
+ }
+ return num;
+ err:
+ return rc;
+}
+
+static u32 functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm dm1105_algo = {
+ .master_xfer = dm1105_i2c_xfer,
+ .functionality = functionality,
+};
+
+static inline struct dm1105_dev *feed_to_dm1105_dev(struct dvb_demux_feed *feed)
+{
+ return container_of(feed->demux, struct dm1105_dev, demux);
+}
+
+static inline struct dm1105_dev *frontend_to_dm1105_dev(struct dvb_frontend *fe)
+{
+ return container_of(fe->dvb, struct dm1105_dev, dvb_adapter);
+}
+
+static int dm1105_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+ struct dm1105_dev *dev = frontend_to_dm1105_dev(fe);
+
+ dm1105_gpio_enable(dev, dm1105_boards[dev->boardnr].lnb.mask, 1);
+ if (voltage == SEC_VOLTAGE_18)
+ dm1105_gpio_andor(dev,
+ dm1105_boards[dev->boardnr].lnb.mask,
+ dm1105_boards[dev->boardnr].lnb.v18);
+ else if (voltage == SEC_VOLTAGE_13)
+ dm1105_gpio_andor(dev,
+ dm1105_boards[dev->boardnr].lnb.mask,
+ dm1105_boards[dev->boardnr].lnb.v13);
+ else
+ dm1105_gpio_andor(dev,
+ dm1105_boards[dev->boardnr].lnb.mask,
+ dm1105_boards[dev->boardnr].lnb.off);
+
+ return 0;
+}
+
+static void dm1105_set_dma_addr(struct dm1105_dev *dev)
+{
+ dm_writel(DM1105_STADR, cpu_to_le32(dev->dma_addr));
+}
+
+static int __devinit dm1105_dma_map(struct dm1105_dev *dev)
+{
+ dev->ts_buf = pci_alloc_consistent(dev->pdev,
+ 6 * DM1105_DMA_BYTES,
+ &dev->dma_addr);
+
+ return !dev->ts_buf;
+}
+
+static void dm1105_dma_unmap(struct dm1105_dev *dev)
+{
+ pci_free_consistent(dev->pdev,
+ 6 * DM1105_DMA_BYTES,
+ dev->ts_buf,
+ dev->dma_addr);
+}
+
+static void dm1105_enable_irqs(struct dm1105_dev *dev)
+{
+ dm_writeb(DM1105_INTMAK, INTMAK_ALLMASK);
+ dm_writeb(DM1105_CR, 1);
+}
+
+static void dm1105_disable_irqs(struct dm1105_dev *dev)
+{
+ dm_writeb(DM1105_INTMAK, INTMAK_IRM);
+ dm_writeb(DM1105_CR, 0);
+}
+
+static int dm1105_start_feed(struct dvb_demux_feed *f)
+{
+ struct dm1105_dev *dev = feed_to_dm1105_dev(f);
+
+ if (dev->full_ts_users++ == 0)
+ dm1105_enable_irqs(dev);
+
+ return 0;
+}
+
+static int dm1105_stop_feed(struct dvb_demux_feed *f)
+{
+ struct dm1105_dev *dev = feed_to_dm1105_dev(f);
+
+ if (--dev->full_ts_users == 0)
+ dm1105_disable_irqs(dev);
+
+ return 0;
+}
+
+/* ir work handler */
+static void dm1105_emit_key(struct work_struct *work)
+{
+ struct infrared *ir = container_of(work, struct infrared, work);
+ u32 ircom = ir->ir_command;
+ u8 data;
+
+ if (ir_debug)
+ printk(KERN_INFO "%s: received byte 0x%04x\n", __func__, ircom);
+
+ data = (ircom >> 8) & 0x7f;
+
+ rc_keydown(ir->dev, data, 0);
+}
+
+/* work handler */
+static void dm1105_dmx_buffer(struct work_struct *work)
+{
+ struct dm1105_dev *dev = container_of(work, struct dm1105_dev, work);
+ unsigned int nbpackets;
+ u32 oldwrp = dev->wrp;
+ u32 nextwrp = dev->nextwrp;
+
+ if (!((dev->ts_buf[oldwrp] == 0x47) &&
+ (dev->ts_buf[oldwrp + 188] == 0x47) &&
+ (dev->ts_buf[oldwrp + 188 * 2] == 0x47))) {
+ dev->PacketErrorCount++;
+ /* bad packet found */
+ if ((dev->PacketErrorCount >= 2) &&
+ (dev->dmarst == 0)) {
+ dm_writeb(DM1105_RST, 1);
+ dev->wrp = 0;
+ dev->PacketErrorCount = 0;
+ dev->dmarst = 0;
+ return;
+ }
+ }
+
+ if (nextwrp < oldwrp) {
+ memcpy(dev->ts_buf + dev->buffer_size, dev->ts_buf, nextwrp);
+ nbpackets = ((dev->buffer_size - oldwrp) + nextwrp) / 188;
+ } else
+ nbpackets = (nextwrp - oldwrp) / 188;
+
+ dev->wrp = nextwrp;
+ dvb_dmx_swfilter_packets(&dev->demux, &dev->ts_buf[oldwrp], nbpackets);
+}
+
+static irqreturn_t dm1105_irq(int irq, void *dev_id)
+{
+ struct dm1105_dev *dev = dev_id;
+
+ /* Read-Write INSTS Ack's Interrupt for DM1105 chip 16.03.2008 */
+ unsigned int intsts = dm_readb(DM1105_INTSTS);
+ dm_writeb(DM1105_INTSTS, intsts);
+
+ switch (intsts) {
+ case INTSTS_TSIRQ:
+ case (INTSTS_TSIRQ | INTSTS_IR):
+ dev->nextwrp = dm_readl(DM1105_WRP) - dm_readl(DM1105_STADR);
+ queue_work(dev->wq, &dev->work);
+ break;
+ case INTSTS_IR:
+ dev->ir.ir_command = dm_readl(DM1105_IRCODE);
+ schedule_work(&dev->ir.work);
+ break;
+ }
+
+ return IRQ_HANDLED;
+}
+
+int __devinit dm1105_ir_init(struct dm1105_dev *dm1105)
+{
+ struct rc_dev *dev;
+ int err = -ENOMEM;
+
+ dev = rc_allocate_device();
+ if (!dev)
+ return -ENOMEM;
+
+ snprintf(dm1105->ir.input_phys, sizeof(dm1105->ir.input_phys),
+ "pci-%s/ir0", pci_name(dm1105->pdev));
+
+ dev->driver_name = MODULE_NAME;
+ dev->map_name = RC_MAP_DM1105_NEC;
+ dev->driver_type = RC_DRIVER_SCANCODE;
+ dev->input_name = "DVB on-card IR receiver";
+ dev->input_phys = dm1105->ir.input_phys;
+ dev->input_id.bustype = BUS_PCI;
+ dev->input_id.version = 1;
+ if (dm1105->pdev->subsystem_vendor) {
+ dev->input_id.vendor = dm1105->pdev->subsystem_vendor;
+ dev->input_id.product = dm1105->pdev->subsystem_device;
+ } else {
+ dev->input_id.vendor = dm1105->pdev->vendor;
+ dev->input_id.product = dm1105->pdev->device;
+ }
+ dev->dev.parent = &dm1105->pdev->dev;
+
+ INIT_WORK(&dm1105->ir.work, dm1105_emit_key);
+
+ err = rc_register_device(dev);
+ if (err < 0) {
+ rc_free_device(dev);
+ return err;
+ }
+
+ dm1105->ir.dev = dev;
+ return 0;
+}
+
+void __devexit dm1105_ir_exit(struct dm1105_dev *dm1105)
+{
+ rc_unregister_device(dm1105->ir.dev);
+}
+
+static int __devinit dm1105_hw_init(struct dm1105_dev *dev)
+{
+ dm1105_disable_irqs(dev);
+
+ dm_writeb(DM1105_HOST_CTR, 0);
+
+ /*DATALEN 188,*/
+ dm_writeb(DM1105_DTALENTH, 188);
+ /*TS_STRT TS_VALP MSBFIRST TS_MODE ALPAS TSPES*/
+ dm_writew(DM1105_TSCTR, 0xc10a);
+
+ /* map DMA and set address */
+ dm1105_dma_map(dev);
+ dm1105_set_dma_addr(dev);
+ /* big buffer */
+ dm_writel(DM1105_RLEN, 5 * DM1105_DMA_BYTES);
+ dm_writeb(DM1105_INTCNT, 47);
+
+ /* IR NEC mode enable */
+ dm_writeb(DM1105_IRCTR, (DM1105_IR_EN | DM1105_SYS_CHK));
+ dm_writeb(DM1105_IRMODE, 0);
+ dm_writew(DM1105_SYSTEMCODE, 0);
+
+ return 0;
+}
+
+static void dm1105_hw_exit(struct dm1105_dev *dev)
+{
+ dm1105_disable_irqs(dev);
+
+ /* IR disable */
+ dm_writeb(DM1105_IRCTR, 0);
+ dm_writeb(DM1105_INTMAK, INTMAK_NONEMASK);
+
+ dm1105_dma_unmap(dev);
+}
+
+static struct stv0299_config sharp_z0194a_config = {
+ .demod_address = 0x68,
+ .inittab = sharp_z0194a_inittab,
+ .mclk = 88000000UL,
+ .invert = 1,
+ .skip_reinit = 0,
+ .lock_output = STV0299_LOCKOUTPUT_1,
+ .volt13_op0_op1 = STV0299_VOLT13_OP1,
+ .min_delay_ms = 100,
+ .set_symbol_rate = sharp_z0194a_set_symbol_rate,
+};
+
+static struct stv0288_config earda_config = {
+ .demod_address = 0x68,
+ .min_delay_ms = 100,
+};
+
+static struct si21xx_config serit_config = {
+ .demod_address = 0x68,
+ .min_delay_ms = 100,
+
+};
+
+static struct cx24116_config serit_sp2633_config = {
+ .demod_address = 0x55,
+};
+
+static struct ds3000_config dvbworld_ds3000_config = {
+ .demod_address = 0x68,
+};
+
+static int __devinit frontend_init(struct dm1105_dev *dev)
+{
+ int ret;
+
+ switch (dev->boardnr) {
+ case DM1105_BOARD_UNBRANDED_I2C_ON_GPIO:
+ dm1105_gpio_enable(dev, GPIO15, 1);
+ dm1105_gpio_clear(dev, GPIO15);
+ msleep(100);
+ dm1105_gpio_set(dev, GPIO15);
+ msleep(200);
+ dev->fe = dvb_attach(
+ stv0299_attach, &sharp_z0194a_config,
+ &dev->i2c_bb_adap);
+ if (dev->fe) {
+ dev->fe->ops.set_voltage = dm1105_set_voltage;
+ dvb_attach(dvb_pll_attach, dev->fe, 0x60,
+ &dev->i2c_bb_adap, DVB_PLL_OPERA1);
+ break;
+ }
+
+ dev->fe = dvb_attach(
+ stv0288_attach, &earda_config,
+ &dev->i2c_bb_adap);
+ if (dev->fe) {
+ dev->fe->ops.set_voltage = dm1105_set_voltage;
+ dvb_attach(stb6000_attach, dev->fe, 0x61,
+ &dev->i2c_bb_adap);
+ break;
+ }
+
+ dev->fe = dvb_attach(
+ si21xx_attach, &serit_config,
+ &dev->i2c_bb_adap);
+ if (dev->fe)
+ dev->fe->ops.set_voltage = dm1105_set_voltage;
+ break;
+ case DM1105_BOARD_DVBWORLD_2004:
+ dev->fe = dvb_attach(
+ cx24116_attach, &serit_sp2633_config,
+ &dev->i2c_adap);
+ if (dev->fe) {
+ dev->fe->ops.set_voltage = dm1105_set_voltage;
+ break;
+ }
+
+ dev->fe = dvb_attach(
+ ds3000_attach, &dvbworld_ds3000_config,
+ &dev->i2c_adap);
+ if (dev->fe)
+ dev->fe->ops.set_voltage = dm1105_set_voltage;
+
+ break;
+ case DM1105_BOARD_DVBWORLD_2002:
+ case DM1105_BOARD_AXESS_DM05:
+ default:
+ dev->fe = dvb_attach(
+ stv0299_attach, &sharp_z0194a_config,
+ &dev->i2c_adap);
+ if (dev->fe) {
+ dev->fe->ops.set_voltage = dm1105_set_voltage;
+ dvb_attach(dvb_pll_attach, dev->fe, 0x60,
+ &dev->i2c_adap, DVB_PLL_OPERA1);
+ break;
+ }
+
+ dev->fe = dvb_attach(
+ stv0288_attach, &earda_config,
+ &dev->i2c_adap);
+ if (dev->fe) {
+ dev->fe->ops.set_voltage = dm1105_set_voltage;
+ dvb_attach(stb6000_attach, dev->fe, 0x61,
+ &dev->i2c_adap);
+ break;
+ }
+
+ dev->fe = dvb_attach(
+ si21xx_attach, &serit_config,
+ &dev->i2c_adap);
+ if (dev->fe)
+ dev->fe->ops.set_voltage = dm1105_set_voltage;
+
+ }
+
+ if (!dev->fe) {
+ dev_err(&dev->pdev->dev, "could not attach frontend\n");
+ return -ENODEV;
+ }
+
+ ret = dvb_register_frontend(&dev->dvb_adapter, dev->fe);
+ if (ret < 0) {
+ if (dev->fe->ops.release)
+ dev->fe->ops.release(dev->fe);
+ dev->fe = NULL;
+ return ret;
+ }
+
+ return 0;
+}
+
+static void __devinit dm1105_read_mac(struct dm1105_dev *dev, u8 *mac)
+{
+ static u8 command[1] = { 0x28 };
+
+ struct i2c_msg msg[] = {
+ {
+ .addr = IIC_24C01_addr >> 1,
+ .flags = 0,
+ .buf = command,
+ .len = 1
+ }, {
+ .addr = IIC_24C01_addr >> 1,
+ .flags = I2C_M_RD,
+ .buf = mac,
+ .len = 6
+ },
+ };
+
+ dm1105_i2c_xfer(&dev->i2c_adap, msg , 2);
+ dev_info(&dev->pdev->dev, "MAC %pM\n", mac);
+}
+
+static int __devinit dm1105_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct dm1105_dev *dev;
+ struct dvb_adapter *dvb_adapter;
+ struct dvb_demux *dvbdemux;
+ struct dmx_demux *dmx;
+ int ret = -ENOMEM;
+ int i;
+
+ dev = kzalloc(sizeof(struct dm1105_dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+
+ /* board config */
+ dev->nr = dm1105_devcount;
+ dev->boardnr = UNSET;
+ if (card[dev->nr] < ARRAY_SIZE(dm1105_boards))
+ dev->boardnr = card[dev->nr];
+ for (i = 0; UNSET == dev->boardnr &&
+ i < ARRAY_SIZE(dm1105_subids); i++)
+ if (pdev->subsystem_vendor ==
+ dm1105_subids[i].subvendor &&
+ pdev->subsystem_device ==
+ dm1105_subids[i].subdevice)
+ dev->boardnr = dm1105_subids[i].card;
+
+ if (UNSET == dev->boardnr) {
+ dev->boardnr = DM1105_BOARD_UNKNOWN;
+ dm1105_card_list(pdev);
+ }
+
+ dm1105_devcount++;
+ dev->pdev = pdev;
+ dev->buffer_size = 5 * DM1105_DMA_BYTES;
+ dev->PacketErrorCount = 0;
+ dev->dmarst = 0;
+
+ ret = pci_enable_device(pdev);
+ if (ret < 0)
+ goto err_kfree;
+
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (ret < 0)
+ goto err_pci_disable_device;
+
+ pci_set_master(pdev);
+
+ ret = pci_request_regions(pdev, DRIVER_NAME);
+ if (ret < 0)
+ goto err_pci_disable_device;
+
+ dev->io_mem = pci_iomap(pdev, 0, pci_resource_len(pdev, 0));
+ if (!dev->io_mem) {
+ ret = -EIO;
+ goto err_pci_release_regions;
+ }
+
+ spin_lock_init(&dev->lock);
+ pci_set_drvdata(pdev, dev);
+
+ ret = dm1105_hw_init(dev);
+ if (ret < 0)
+ goto err_pci_iounmap;
+
+ /* i2c */
+ i2c_set_adapdata(&dev->i2c_adap, dev);
+ strcpy(dev->i2c_adap.name, DRIVER_NAME);
+ dev->i2c_adap.owner = THIS_MODULE;
+ dev->i2c_adap.dev.parent = &pdev->dev;
+ dev->i2c_adap.algo = &dm1105_algo;
+ dev->i2c_adap.algo_data = dev;
+ ret = i2c_add_adapter(&dev->i2c_adap);
+
+ if (ret < 0)
+ goto err_dm1105_hw_exit;
+
+ i2c_set_adapdata(&dev->i2c_bb_adap, dev);
+ strcpy(dev->i2c_bb_adap.name, DM1105_I2C_GPIO_NAME);
+ dev->i2c_bb_adap.owner = THIS_MODULE;
+ dev->i2c_bb_adap.dev.parent = &pdev->dev;
+ dev->i2c_bb_adap.algo_data = &dev->i2c_bit;
+ dev->i2c_bit.data = dev;
+ dev->i2c_bit.setsda = dm1105_setsda;
+ dev->i2c_bit.setscl = dm1105_setscl;
+ dev->i2c_bit.getsda = dm1105_getsda;
+ dev->i2c_bit.getscl = dm1105_getscl;
+ dev->i2c_bit.udelay = 10;
+ dev->i2c_bit.timeout = 10;
+
+ /* Raise SCL and SDA */
+ dm1105_setsda(dev, 1);
+ dm1105_setscl(dev, 1);
+
+ ret = i2c_bit_add_bus(&dev->i2c_bb_adap);
+ if (ret < 0)
+ goto err_i2c_del_adapter;
+
+ /* dvb */
+ ret = dvb_register_adapter(&dev->dvb_adapter, DRIVER_NAME,
+ THIS_MODULE, &pdev->dev, adapter_nr);
+ if (ret < 0)
+ goto err_i2c_del_adapters;
+
+ dvb_adapter = &dev->dvb_adapter;
+
+ dm1105_read_mac(dev, dvb_adapter->proposed_mac);
+
+ dvbdemux = &dev->demux;
+ dvbdemux->filternum = 256;
+ dvbdemux->feednum = 256;
+ dvbdemux->start_feed = dm1105_start_feed;
+ dvbdemux->stop_feed = dm1105_stop_feed;
+ dvbdemux->dmx.capabilities = (DMX_TS_FILTERING |
+ DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING);
+ ret = dvb_dmx_init(dvbdemux);
+ if (ret < 0)
+ goto err_dvb_unregister_adapter;
+
+ dmx = &dvbdemux->dmx;
+ dev->dmxdev.filternum = 256;
+ dev->dmxdev.demux = dmx;
+ dev->dmxdev.capabilities = 0;
+
+ ret = dvb_dmxdev_init(&dev->dmxdev, dvb_adapter);
+ if (ret < 0)
+ goto err_dvb_dmx_release;
+
+ dev->hw_frontend.source = DMX_FRONTEND_0;
+
+ ret = dmx->add_frontend(dmx, &dev->hw_frontend);
+ if (ret < 0)
+ goto err_dvb_dmxdev_release;
+
+ dev->mem_frontend.source = DMX_MEMORY_FE;
+
+ ret = dmx->add_frontend(dmx, &dev->mem_frontend);
+ if (ret < 0)
+ goto err_remove_hw_frontend;
+
+ ret = dmx->connect_frontend(dmx, &dev->hw_frontend);
+ if (ret < 0)
+ goto err_remove_mem_frontend;
+
+ ret = dvb_net_init(dvb_adapter, &dev->dvbnet, dmx);
+ if (ret < 0)
+ goto err_disconnect_frontend;
+
+ ret = frontend_init(dev);
+ if (ret < 0)
+ goto err_dvb_net;
+
+ dm1105_ir_init(dev);
+
+ INIT_WORK(&dev->work, dm1105_dmx_buffer);
+ sprintf(dev->wqn, "%s/%d", dvb_adapter->name, dvb_adapter->num);
+ dev->wq = create_singlethread_workqueue(dev->wqn);
+ if (!dev->wq)
+ goto err_dvb_net;
+
+ ret = request_irq(pdev->irq, dm1105_irq, IRQF_SHARED,
+ DRIVER_NAME, dev);
+ if (ret < 0)
+ goto err_workqueue;
+
+ return 0;
+
+err_workqueue:
+ destroy_workqueue(dev->wq);
+err_dvb_net:
+ dvb_net_release(&dev->dvbnet);
+err_disconnect_frontend:
+ dmx->disconnect_frontend(dmx);
+err_remove_mem_frontend:
+ dmx->remove_frontend(dmx, &dev->mem_frontend);
+err_remove_hw_frontend:
+ dmx->remove_frontend(dmx, &dev->hw_frontend);
+err_dvb_dmxdev_release:
+ dvb_dmxdev_release(&dev->dmxdev);
+err_dvb_dmx_release:
+ dvb_dmx_release(dvbdemux);
+err_dvb_unregister_adapter:
+ dvb_unregister_adapter(dvb_adapter);
+err_i2c_del_adapters:
+ i2c_del_adapter(&dev->i2c_bb_adap);
+err_i2c_del_adapter:
+ i2c_del_adapter(&dev->i2c_adap);
+err_dm1105_hw_exit:
+ dm1105_hw_exit(dev);
+err_pci_iounmap:
+ pci_iounmap(pdev, dev->io_mem);
+err_pci_release_regions:
+ pci_release_regions(pdev);
+err_pci_disable_device:
+ pci_disable_device(pdev);
+err_kfree:
+ pci_set_drvdata(pdev, NULL);
+ kfree(dev);
+ return ret;
+}
+
+static void __devexit dm1105_remove(struct pci_dev *pdev)
+{
+ struct dm1105_dev *dev = pci_get_drvdata(pdev);
+ struct dvb_adapter *dvb_adapter = &dev->dvb_adapter;
+ struct dvb_demux *dvbdemux = &dev->demux;
+ struct dmx_demux *dmx = &dvbdemux->dmx;
+
+ dm1105_ir_exit(dev);
+ dmx->close(dmx);
+ dvb_net_release(&dev->dvbnet);
+ if (dev->fe)
+ dvb_unregister_frontend(dev->fe);
+
+ dmx->disconnect_frontend(dmx);
+ dmx->remove_frontend(dmx, &dev->mem_frontend);
+ dmx->remove_frontend(dmx, &dev->hw_frontend);
+ dvb_dmxdev_release(&dev->dmxdev);
+ dvb_dmx_release(dvbdemux);
+ dvb_unregister_adapter(dvb_adapter);
+ if (&dev->i2c_adap)
+ i2c_del_adapter(&dev->i2c_adap);
+
+ dm1105_hw_exit(dev);
+ synchronize_irq(pdev->irq);
+ free_irq(pdev->irq, dev);
+ pci_iounmap(pdev, dev->io_mem);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ dm1105_devcount--;
+ kfree(dev);
+}
+
+static struct pci_device_id dm1105_id_table[] __devinitdata = {
+ {
+ .vendor = PCI_VENDOR_ID_TRIGEM,
+ .device = PCI_DEVICE_ID_DM1105,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ }, {
+ .vendor = PCI_VENDOR_ID_AXESS,
+ .device = PCI_DEVICE_ID_DM05,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ }, {
+ /* empty */
+ },
+};
+
+MODULE_DEVICE_TABLE(pci, dm1105_id_table);
+
+static struct pci_driver dm1105_driver = {
+ .name = DRIVER_NAME,
+ .id_table = dm1105_id_table,
+ .probe = dm1105_probe,
+ .remove = __devexit_p(dm1105_remove),
+};
+
+static int __init dm1105_init(void)
+{
+ return pci_register_driver(&dm1105_driver);
+}
+
+static void __exit dm1105_exit(void)
+{
+ pci_unregister_driver(&dm1105_driver);
+}
+
+module_init(dm1105_init);
+module_exit(dm1105_exit);
+
+MODULE_AUTHOR("Igor M. Liplianin <liplianin@me.by>");
+MODULE_DESCRIPTION("SDMC DM1105 DVB driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/pci/mantis/Kconfig b/drivers/media/pci/mantis/Kconfig
new file mode 100644
index 000000000000..a13a50503134
--- /dev/null
+++ b/drivers/media/pci/mantis/Kconfig
@@ -0,0 +1,38 @@
+config MANTIS_CORE
+ tristate "Mantis/Hopper PCI bridge based devices"
+ depends on PCI && I2C && INPUT && RC_CORE
+
+ help
+ Support for PCI cards based on the Mantis and Hopper PCi bridge.
+
+ Say Y if you own such a device and want to use it.
+
+config DVB_MANTIS
+ tristate "MANTIS based cards"
+ depends on MANTIS_CORE && DVB_CORE && PCI && I2C
+ select DVB_MB86A16 if !DVB_FE_CUSTOMISE
+ select DVB_ZL10353 if !DVB_FE_CUSTOMISE
+ select DVB_STV0299 if !DVB_FE_CUSTOMISE
+ select DVB_LNBP21 if !DVB_FE_CUSTOMISE
+ select DVB_STB0899 if !DVB_FE_CUSTOMISE
+ select DVB_STB6100 if !DVB_FE_CUSTOMISE
+ select DVB_TDA665x if !DVB_FE_CUSTOMISE
+ select DVB_TDA10021 if !DVB_FE_CUSTOMISE
+ select DVB_TDA10023 if !DVB_FE_CUSTOMISE
+ select DVB_PLL
+ help
+ Support for PCI cards based on the Mantis PCI bridge.
+ Say Y when you have a Mantis based DVB card and want to use it.
+
+ If unsure say N.
+
+config DVB_HOPPER
+ tristate "HOPPER based cards"
+ depends on MANTIS_CORE && DVB_CORE && PCI && I2C
+ select DVB_ZL10353 if !DVB_FE_CUSTOMISE
+ select DVB_PLL
+ help
+ Support for PCI cards based on the Hopper PCI bridge.
+ Say Y when you have a Hopper based DVB card and want to use it.
+
+ If unsure say N
diff --git a/drivers/media/pci/mantis/Makefile b/drivers/media/pci/mantis/Makefile
new file mode 100644
index 000000000000..f715051e4453
--- /dev/null
+++ b/drivers/media/pci/mantis/Makefile
@@ -0,0 +1,28 @@
+mantis_core-objs := mantis_ioc.o \
+ mantis_uart.o \
+ mantis_dma.o \
+ mantis_pci.o \
+ mantis_i2c.o \
+ mantis_dvb.o \
+ mantis_evm.o \
+ mantis_hif.o \
+ mantis_ca.o \
+ mantis_pcmcia.o \
+ mantis_input.o
+
+mantis-objs := mantis_cards.o \
+ mantis_vp1033.o \
+ mantis_vp1034.o \
+ mantis_vp1041.o \
+ mantis_vp2033.o \
+ mantis_vp2040.o \
+ mantis_vp3030.o
+
+hopper-objs := hopper_cards.o \
+ hopper_vp3028.o
+
+obj-$(CONFIG_MANTIS_CORE) += mantis_core.o
+obj-$(CONFIG_DVB_MANTIS) += mantis.o
+obj-$(CONFIG_DVB_HOPPER) += hopper.o
+
+ccflags-y += -Idrivers/media/dvb-core/ -Idrivers/media/dvb-frontends/
diff --git a/drivers/media/pci/mantis/hopper_cards.c b/drivers/media/pci/mantis/hopper_cards.c
new file mode 100644
index 000000000000..cc0251e01077
--- /dev/null
+++ b/drivers/media/pci/mantis/hopper_cards.c
@@ -0,0 +1,277 @@
+/*
+ Hopper PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <asm/irq.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "hopper_vp3028.h"
+#include "mantis_dma.h"
+#include "mantis_dvb.h"
+#include "mantis_uart.h"
+#include "mantis_ioc.h"
+#include "mantis_pci.h"
+#include "mantis_i2c.h"
+#include "mantis_reg.h"
+
+static unsigned int verbose;
+module_param(verbose, int, 0644);
+MODULE_PARM_DESC(verbose, "verbose startup messages, default is 0 (no)");
+
+#define DRIVER_NAME "Hopper"
+
+static char *label[10] = {
+ "DMA",
+ "IRQ-0",
+ "IRQ-1",
+ "OCERR",
+ "PABRT",
+ "RIPRR",
+ "PPERR",
+ "FTRGT",
+ "RISCI",
+ "RACK"
+};
+
+static int devs;
+
+static irqreturn_t hopper_irq_handler(int irq, void *dev_id)
+{
+ u32 stat = 0, mask = 0;
+ u32 rst_stat = 0, rst_mask = 0;
+
+ struct mantis_pci *mantis;
+ struct mantis_ca *ca;
+
+ mantis = (struct mantis_pci *) dev_id;
+ if (unlikely(mantis == NULL)) {
+ dprintk(MANTIS_ERROR, 1, "Mantis == NULL");
+ return IRQ_NONE;
+ }
+ ca = mantis->mantis_ca;
+
+ stat = mmread(MANTIS_INT_STAT);
+ mask = mmread(MANTIS_INT_MASK);
+ if (!(stat & mask))
+ return IRQ_NONE;
+
+ rst_mask = MANTIS_GPIF_WRACK |
+ MANTIS_GPIF_OTHERR |
+ MANTIS_SBUF_WSTO |
+ MANTIS_GPIF_EXTIRQ;
+
+ rst_stat = mmread(MANTIS_GPIF_STATUS);
+ rst_stat &= rst_mask;
+ mmwrite(rst_stat, MANTIS_GPIF_STATUS);
+
+ mantis->mantis_int_stat = stat;
+ mantis->mantis_int_mask = mask;
+ dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask);
+ if (stat & MANTIS_INT_RISCEN) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]);
+ }
+ if (stat & MANTIS_INT_IRQ0) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]);
+ mantis->gpif_status = rst_stat;
+ wake_up(&ca->hif_write_wq);
+ schedule_work(&ca->hif_evm_work);
+ }
+ if (stat & MANTIS_INT_IRQ1) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]);
+ schedule_work(&mantis->uart_work);
+ }
+ if (stat & MANTIS_INT_OCERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]);
+ }
+ if (stat & MANTIS_INT_PABORT) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]);
+ }
+ if (stat & MANTIS_INT_RIPERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]);
+ }
+ if (stat & MANTIS_INT_PPERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]);
+ }
+ if (stat & MANTIS_INT_FTRGT) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]);
+ }
+ if (stat & MANTIS_INT_RISCI) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]);
+ mantis->busy_block = (stat & MANTIS_INT_RISCSTAT) >> 28;
+ tasklet_schedule(&mantis->tasklet);
+ }
+ if (stat & MANTIS_INT_I2CDONE) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]);
+ wake_up(&mantis->i2c_wq);
+ }
+ mmwrite(stat, MANTIS_INT_STAT);
+ stat &= ~(MANTIS_INT_RISCEN | MANTIS_INT_I2CDONE |
+ MANTIS_INT_I2CRACK | MANTIS_INT_PCMCIA7 |
+ MANTIS_INT_PCMCIA6 | MANTIS_INT_PCMCIA5 |
+ MANTIS_INT_PCMCIA4 | MANTIS_INT_PCMCIA3 |
+ MANTIS_INT_PCMCIA2 | MANTIS_INT_PCMCIA1 |
+ MANTIS_INT_PCMCIA0 | MANTIS_INT_IRQ1 |
+ MANTIS_INT_IRQ0 | MANTIS_INT_OCERR |
+ MANTIS_INT_PABORT | MANTIS_INT_RIPERR |
+ MANTIS_INT_PPERR | MANTIS_INT_FTRGT |
+ MANTIS_INT_RISCI);
+
+ if (stat)
+ dprintk(MANTIS_DEBUG, 0, "<Unknown> Stat=<%02x> Mask=<%02x>", stat, mask);
+
+ dprintk(MANTIS_DEBUG, 0, "\n");
+ return IRQ_HANDLED;
+}
+
+static int __devinit hopper_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
+{
+ struct mantis_pci *mantis;
+ struct mantis_hwconfig *config;
+ int err = 0;
+
+ mantis = kzalloc(sizeof(struct mantis_pci), GFP_KERNEL);
+ if (mantis == NULL) {
+ printk(KERN_ERR "%s ERROR: Out of memory\n", __func__);
+ err = -ENOMEM;
+ goto fail0;
+ }
+
+ mantis->num = devs;
+ mantis->verbose = verbose;
+ mantis->pdev = pdev;
+ config = (struct mantis_hwconfig *) pci_id->driver_data;
+ config->irq_handler = &hopper_irq_handler;
+ mantis->hwconfig = config;
+
+ err = mantis_pci_init(mantis);
+ if (err) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err);
+ goto fail1;
+ }
+
+ err = mantis_stream_control(mantis, STREAM_TO_HIF);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err);
+ goto fail1;
+ }
+
+ err = mantis_i2c_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err);
+ goto fail2;
+ }
+
+ err = mantis_get_mac(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err);
+ goto fail2;
+ }
+
+ err = mantis_dma_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err);
+ goto fail3;
+ }
+
+ err = mantis_dvb_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err);
+ goto fail4;
+ }
+ devs++;
+
+ return err;
+
+fail4:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err);
+ mantis_dma_exit(mantis);
+
+fail3:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C exit! <%d>", err);
+ mantis_i2c_exit(mantis);
+
+fail2:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI exit! <%d>", err);
+ mantis_pci_exit(mantis);
+
+fail1:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis free! <%d>", err);
+ kfree(mantis);
+
+fail0:
+ return err;
+}
+
+static void __devexit hopper_pci_remove(struct pci_dev *pdev)
+{
+ struct mantis_pci *mantis = pci_get_drvdata(pdev);
+
+ if (mantis) {
+ mantis_dvb_exit(mantis);
+ mantis_dma_exit(mantis);
+ mantis_i2c_exit(mantis);
+ mantis_pci_exit(mantis);
+ kfree(mantis);
+ }
+ return;
+
+}
+
+static struct pci_device_id hopper_pci_table[] = {
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3028_DVB_T, &vp3028_config),
+ { }
+};
+
+MODULE_DEVICE_TABLE(pci, hopper_pci_table);
+
+static struct pci_driver hopper_pci_driver = {
+ .name = DRIVER_NAME,
+ .id_table = hopper_pci_table,
+ .probe = hopper_pci_probe,
+ .remove = hopper_pci_remove,
+};
+
+static int __devinit hopper_init(void)
+{
+ return pci_register_driver(&hopper_pci_driver);
+}
+
+static void __devexit hopper_exit(void)
+{
+ return pci_unregister_driver(&hopper_pci_driver);
+}
+
+module_init(hopper_init);
+module_exit(hopper_exit);
+
+MODULE_DESCRIPTION("HOPPER driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/pci/mantis/hopper_vp3028.c b/drivers/media/pci/mantis/hopper_vp3028.c
new file mode 100644
index 000000000000..68a29f8bdf73
--- /dev/null
+++ b/drivers/media/pci/mantis/hopper_vp3028.c
@@ -0,0 +1,88 @@
+/*
+ Hopper VP-3028 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "zl10353.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "hopper_vp3028.h"
+
+struct zl10353_config hopper_vp3028_config = {
+ .demod_address = 0x0f,
+};
+
+#define MANTIS_MODEL_NAME "VP-3028"
+#define MANTIS_DEV_TYPE "DVB-T"
+
+static int vp3028_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ int err = 0;
+
+ mantis_gpio_set_bits(mantis, config->reset, 0);
+ msleep(100);
+ err = mantis_frontend_power(mantis, POWER_ON);
+ msleep(100);
+ mantis_gpio_set_bits(mantis, config->reset, 1);
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ msleep(250);
+ dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
+ fe = dvb_attach(zl10353_attach, &hopper_vp3028_config, adapter);
+
+ if (!fe)
+ return -1;
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp3028_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_188,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp3028_frontend_init,
+ .power = GPIF_A00,
+ .reset = GPIF_A03,
+};
diff --git a/drivers/media/pci/mantis/hopper_vp3028.h b/drivers/media/pci/mantis/hopper_vp3028.h
new file mode 100644
index 000000000000..57239498bc87
--- /dev/null
+++ b/drivers/media/pci/mantis/hopper_vp3028.h
@@ -0,0 +1,30 @@
+/*
+ Hopper VP-3028 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP3028_H
+#define __MANTIS_VP3028_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_3028_DVB_T 0x0028
+
+extern struct mantis_hwconfig vp3028_config;
+
+#endif /* __MANTIS_VP3028_H */
diff --git a/drivers/media/pci/mantis/mantis_ca.c b/drivers/media/pci/mantis/mantis_ca.c
new file mode 100644
index 000000000000..3d7046909009
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_ca.c
@@ -0,0 +1,209 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_link.h"
+#include "mantis_hif.h"
+#include "mantis_reg.h"
+
+#include "mantis_ca.h"
+
+static int mantis_ca_read_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Read", slot);
+
+ if (slot != 0)
+ return -EINVAL;
+
+ return mantis_hif_read_mem(ca, addr);
+}
+
+static int mantis_ca_write_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr, u8 data)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Write", slot);
+
+ if (slot != 0)
+ return -EINVAL;
+
+ return mantis_hif_write_mem(ca, addr, data);
+}
+
+static int mantis_ca_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Read", slot);
+
+ if (slot != 0)
+ return -EINVAL;
+
+ return mantis_hif_read_iom(ca, addr);
+}
+
+static int mantis_ca_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr, u8 data)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Write", slot);
+
+ if (slot != 0)
+ return -EINVAL;
+
+ return mantis_hif_write_iom(ca, addr, data);
+}
+
+static int mantis_ca_slot_reset(struct dvb_ca_en50221 *en50221, int slot)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot RESET", slot);
+ udelay(500); /* Wait.. */
+ mmwrite(0xda, MANTIS_PCMCIA_RESET); /* Leading edge assert */
+ udelay(500);
+ mmwrite(0x00, MANTIS_PCMCIA_RESET); /* Trailing edge deassert */
+ msleep(1000);
+ dvb_ca_en50221_camready_irq(&ca->en50221, 0);
+
+ return 0;
+}
+
+static int mantis_ca_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot shutdown", slot);
+
+ return 0;
+}
+
+static int mantis_ts_control(struct dvb_ca_en50221 *en50221, int slot)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): TS control", slot);
+/* mantis_set_direction(mantis, 1); */ /* Enable TS through CAM */
+
+ return 0;
+}
+
+static int mantis_slot_status(struct dvb_ca_en50221 *en50221, int slot, int open)
+{
+ struct mantis_ca *ca = en50221->data;
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Poll Slot status", slot);
+
+ if (ca->slot_state == MODULE_INSERTED) {
+ dprintk(MANTIS_DEBUG, 1, "CA Module present and ready");
+ return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
+ } else {
+ dprintk(MANTIS_DEBUG, 1, "CA Module not present or not ready");
+ }
+
+ return 0;
+}
+
+int mantis_ca_init(struct mantis_pci *mantis)
+{
+ struct dvb_adapter *dvb_adapter = &mantis->dvb_adapter;
+ struct mantis_ca *ca;
+ int ca_flags = 0, result;
+
+ dprintk(MANTIS_DEBUG, 1, "Initializing Mantis CA");
+ ca = kzalloc(sizeof(struct mantis_ca), GFP_KERNEL);
+ if (!ca) {
+ dprintk(MANTIS_ERROR, 1, "Out of memory!, exiting ..");
+ result = -ENOMEM;
+ goto err;
+ }
+
+ ca->ca_priv = mantis;
+ mantis->mantis_ca = ca;
+ ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE;
+ /* register CA interface */
+ ca->en50221.owner = THIS_MODULE;
+ ca->en50221.read_attribute_mem = mantis_ca_read_attr_mem;
+ ca->en50221.write_attribute_mem = mantis_ca_write_attr_mem;
+ ca->en50221.read_cam_control = mantis_ca_read_cam_ctl;
+ ca->en50221.write_cam_control = mantis_ca_write_cam_ctl;
+ ca->en50221.slot_reset = mantis_ca_slot_reset;
+ ca->en50221.slot_shutdown = mantis_ca_slot_shutdown;
+ ca->en50221.slot_ts_enable = mantis_ts_control;
+ ca->en50221.poll_slot_status = mantis_slot_status;
+ ca->en50221.data = ca;
+
+ mutex_init(&ca->ca_lock);
+
+ init_waitqueue_head(&ca->hif_data_wq);
+ init_waitqueue_head(&ca->hif_opdone_wq);
+ init_waitqueue_head(&ca->hif_write_wq);
+
+ dprintk(MANTIS_ERROR, 1, "Registering EN50221 device");
+ result = dvb_ca_en50221_init(dvb_adapter, &ca->en50221, ca_flags, 1);
+ if (result != 0) {
+ dprintk(MANTIS_ERROR, 1, "EN50221: Initialization failed <%d>", result);
+ goto err;
+ }
+ dprintk(MANTIS_ERROR, 1, "Registered EN50221 device");
+ mantis_evmgr_init(ca);
+ return 0;
+err:
+ kfree(ca);
+ return result;
+}
+EXPORT_SYMBOL_GPL(mantis_ca_init);
+
+void mantis_ca_exit(struct mantis_pci *mantis)
+{
+ struct mantis_ca *ca = mantis->mantis_ca;
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis CA exit");
+
+ mantis_evmgr_exit(ca);
+ dprintk(MANTIS_ERROR, 1, "Unregistering EN50221 device");
+ if (ca)
+ dvb_ca_en50221_release(&ca->en50221);
+
+ kfree(ca);
+}
+EXPORT_SYMBOL_GPL(mantis_ca_exit);
diff --git a/drivers/media/pci/mantis/mantis_ca.h b/drivers/media/pci/mantis/mantis_ca.h
new file mode 100644
index 000000000000..dc63e55f7eca
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_ca.h
@@ -0,0 +1,27 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_CA_H
+#define __MANTIS_CA_H
+
+extern int mantis_ca_init(struct mantis_pci *mantis);
+extern void mantis_ca_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_CA_H */
diff --git a/drivers/media/pci/mantis/mantis_cards.c b/drivers/media/pci/mantis/mantis_cards.c
new file mode 100644
index 000000000000..0207d1f064e0
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_cards.c
@@ -0,0 +1,307 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <asm/irq.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+
+#include "mantis_vp1033.h"
+#include "mantis_vp1034.h"
+#include "mantis_vp1041.h"
+#include "mantis_vp2033.h"
+#include "mantis_vp2040.h"
+#include "mantis_vp3030.h"
+
+#include "mantis_dma.h"
+#include "mantis_ca.h"
+#include "mantis_dvb.h"
+#include "mantis_uart.h"
+#include "mantis_ioc.h"
+#include "mantis_pci.h"
+#include "mantis_i2c.h"
+#include "mantis_reg.h"
+
+static unsigned int verbose;
+module_param(verbose, int, 0644);
+MODULE_PARM_DESC(verbose, "verbose startup messages, default is 0 (no)");
+
+static int devs;
+
+#define DRIVER_NAME "Mantis"
+
+static char *label[10] = {
+ "DMA",
+ "IRQ-0",
+ "IRQ-1",
+ "OCERR",
+ "PABRT",
+ "RIPRR",
+ "PPERR",
+ "FTRGT",
+ "RISCI",
+ "RACK"
+};
+
+static irqreturn_t mantis_irq_handler(int irq, void *dev_id)
+{
+ u32 stat = 0, mask = 0;
+ u32 rst_stat = 0, rst_mask = 0;
+
+ struct mantis_pci *mantis;
+ struct mantis_ca *ca;
+
+ mantis = (struct mantis_pci *) dev_id;
+ if (unlikely(mantis == NULL)) {
+ dprintk(MANTIS_ERROR, 1, "Mantis == NULL");
+ return IRQ_NONE;
+ }
+ ca = mantis->mantis_ca;
+
+ stat = mmread(MANTIS_INT_STAT);
+ mask = mmread(MANTIS_INT_MASK);
+ if (!(stat & mask))
+ return IRQ_NONE;
+
+ rst_mask = MANTIS_GPIF_WRACK |
+ MANTIS_GPIF_OTHERR |
+ MANTIS_SBUF_WSTO |
+ MANTIS_GPIF_EXTIRQ;
+
+ rst_stat = mmread(MANTIS_GPIF_STATUS);
+ rst_stat &= rst_mask;
+ mmwrite(rst_stat, MANTIS_GPIF_STATUS);
+
+ mantis->mantis_int_stat = stat;
+ mantis->mantis_int_mask = mask;
+ dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask);
+ if (stat & MANTIS_INT_RISCEN) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]);
+ }
+ if (stat & MANTIS_INT_IRQ0) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]);
+ mantis->gpif_status = rst_stat;
+ wake_up(&ca->hif_write_wq);
+ schedule_work(&ca->hif_evm_work);
+ }
+ if (stat & MANTIS_INT_IRQ1) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]);
+ schedule_work(&mantis->uart_work);
+ }
+ if (stat & MANTIS_INT_OCERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]);
+ }
+ if (stat & MANTIS_INT_PABORT) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]);
+ }
+ if (stat & MANTIS_INT_RIPERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]);
+ }
+ if (stat & MANTIS_INT_PPERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]);
+ }
+ if (stat & MANTIS_INT_FTRGT) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]);
+ }
+ if (stat & MANTIS_INT_RISCI) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]);
+ mantis->busy_block = (stat & MANTIS_INT_RISCSTAT) >> 28;
+ tasklet_schedule(&mantis->tasklet);
+ }
+ if (stat & MANTIS_INT_I2CDONE) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]);
+ wake_up(&mantis->i2c_wq);
+ }
+ mmwrite(stat, MANTIS_INT_STAT);
+ stat &= ~(MANTIS_INT_RISCEN | MANTIS_INT_I2CDONE |
+ MANTIS_INT_I2CRACK | MANTIS_INT_PCMCIA7 |
+ MANTIS_INT_PCMCIA6 | MANTIS_INT_PCMCIA5 |
+ MANTIS_INT_PCMCIA4 | MANTIS_INT_PCMCIA3 |
+ MANTIS_INT_PCMCIA2 | MANTIS_INT_PCMCIA1 |
+ MANTIS_INT_PCMCIA0 | MANTIS_INT_IRQ1 |
+ MANTIS_INT_IRQ0 | MANTIS_INT_OCERR |
+ MANTIS_INT_PABORT | MANTIS_INT_RIPERR |
+ MANTIS_INT_PPERR | MANTIS_INT_FTRGT |
+ MANTIS_INT_RISCI);
+
+ if (stat)
+ dprintk(MANTIS_DEBUG, 0, "<Unknown> Stat=<%02x> Mask=<%02x>", stat, mask);
+
+ dprintk(MANTIS_DEBUG, 0, "\n");
+ return IRQ_HANDLED;
+}
+
+static int __devinit mantis_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
+{
+ struct mantis_pci *mantis;
+ struct mantis_hwconfig *config;
+ int err = 0;
+
+ mantis = kzalloc(sizeof(struct mantis_pci), GFP_KERNEL);
+ if (mantis == NULL) {
+ printk(KERN_ERR "%s ERROR: Out of memory\n", __func__);
+ err = -ENOMEM;
+ goto fail0;
+ }
+
+ mantis->num = devs;
+ mantis->verbose = verbose;
+ mantis->pdev = pdev;
+ config = (struct mantis_hwconfig *) pci_id->driver_data;
+ config->irq_handler = &mantis_irq_handler;
+ mantis->hwconfig = config;
+
+ err = mantis_pci_init(mantis);
+ if (err) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err);
+ goto fail1;
+ }
+
+ err = mantis_stream_control(mantis, STREAM_TO_HIF);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err);
+ goto fail1;
+ }
+
+ err = mantis_i2c_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err);
+ goto fail2;
+ }
+
+ err = mantis_get_mac(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err);
+ goto fail2;
+ }
+
+ err = mantis_dma_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err);
+ goto fail3;
+ }
+
+ err = mantis_dvb_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err);
+ goto fail4;
+ }
+ err = mantis_uart_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART initialization failed <%d>", err);
+ goto fail6;
+ }
+
+ devs++;
+
+ return err;
+
+
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART exit! <%d>", err);
+ mantis_uart_exit(mantis);
+
+fail6:
+fail4:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err);
+ mantis_dma_exit(mantis);
+
+fail3:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C exit! <%d>", err);
+ mantis_i2c_exit(mantis);
+
+fail2:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI exit! <%d>", err);
+ mantis_pci_exit(mantis);
+
+fail1:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis free! <%d>", err);
+ kfree(mantis);
+
+fail0:
+ return err;
+}
+
+static void __devexit mantis_pci_remove(struct pci_dev *pdev)
+{
+ struct mantis_pci *mantis = pci_get_drvdata(pdev);
+
+ if (mantis) {
+
+ mantis_uart_exit(mantis);
+ mantis_dvb_exit(mantis);
+ mantis_dma_exit(mantis);
+ mantis_i2c_exit(mantis);
+ mantis_pci_exit(mantis);
+ kfree(mantis);
+ }
+ return;
+}
+
+static struct pci_device_id mantis_pci_table[] = {
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1033_DVB_S, &vp1033_config),
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1034_DVB_S, &vp1034_config),
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1041_DVB_S2, &vp1041_config),
+ MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_10, &vp1041_config),
+ MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_20, &vp1041_config),
+ MAKE_ENTRY(TERRATEC, CINERGY_S2_PCI_HD, &vp1041_config),
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2033_DVB_C, &vp2033_config),
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2040_DVB_C, &vp2040_config),
+ MAKE_ENTRY(TECHNISAT, CABLESTAR_HD2, &vp2040_config),
+ MAKE_ENTRY(TERRATEC, CINERGY_C, &vp2040_config),
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3030_DVB_T, &vp3030_config),
+ { }
+};
+
+MODULE_DEVICE_TABLE(pci, mantis_pci_table);
+
+static struct pci_driver mantis_pci_driver = {
+ .name = DRIVER_NAME,
+ .id_table = mantis_pci_table,
+ .probe = mantis_pci_probe,
+ .remove = mantis_pci_remove,
+};
+
+static int __devinit mantis_init(void)
+{
+ return pci_register_driver(&mantis_pci_driver);
+}
+
+static void __devexit mantis_exit(void)
+{
+ return pci_unregister_driver(&mantis_pci_driver);
+}
+
+module_init(mantis_init);
+module_exit(mantis_exit);
+
+MODULE_DESCRIPTION("MANTIS driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/pci/mantis/mantis_common.h b/drivers/media/pci/mantis/mantis_common.h
new file mode 100644
index 000000000000..f2410cf0a6bf
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_common.h
@@ -0,0 +1,179 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_COMMON_H
+#define __MANTIS_COMMON_H
+
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+
+#include "mantis_uart.h"
+
+#include "mantis_link.h"
+
+#define MANTIS_ERROR 0
+#define MANTIS_NOTICE 1
+#define MANTIS_INFO 2
+#define MANTIS_DEBUG 3
+#define MANTIS_TMG 9
+
+#define dprintk(y, z, format, arg...) do { \
+ if (z) { \
+ if ((mantis->verbose > MANTIS_ERROR) && (mantis->verbose > y)) \
+ printk(KERN_ERR "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
+ else if ((mantis->verbose > MANTIS_NOTICE) && (mantis->verbose > y)) \
+ printk(KERN_NOTICE "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
+ else if ((mantis->verbose > MANTIS_INFO) && (mantis->verbose > y)) \
+ printk(KERN_INFO "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
+ else if ((mantis->verbose > MANTIS_DEBUG) && (mantis->verbose > y)) \
+ printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
+ else if ((mantis->verbose > MANTIS_TMG) && (mantis->verbose > y)) \
+ printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
+ } else { \
+ if (mantis->verbose > y) \
+ printk(format , ##arg); \
+ } \
+} while(0)
+
+#define mwrite(dat, addr) writel((dat), addr)
+#define mread(addr) readl(addr)
+
+#define mmwrite(dat, addr) mwrite((dat), (mantis->mmio + (addr)))
+#define mmread(addr) mread(mantis->mmio + (addr))
+
+#define MANTIS_TS_188 0
+#define MANTIS_TS_204 1
+
+#define TWINHAN_TECHNOLOGIES 0x1822
+#define MANTIS 0x4e35
+
+#define TECHNISAT 0x1ae4
+#define TERRATEC 0x153b
+
+#define MAKE_ENTRY(__subven, __subdev, __configptr) { \
+ .vendor = TWINHAN_TECHNOLOGIES, \
+ .device = MANTIS, \
+ .subvendor = (__subven), \
+ .subdevice = (__subdev), \
+ .driver_data = (unsigned long) (__configptr) \
+}
+
+enum mantis_i2c_mode {
+ MANTIS_PAGE_MODE = 0,
+ MANTIS_BYTE_MODE,
+};
+
+struct mantis_pci;
+
+struct mantis_hwconfig {
+ char *model_name;
+ char *dev_type;
+ u32 ts_size;
+
+ enum mantis_baud baud_rate;
+ enum mantis_parity parity;
+ u32 bytes;
+
+ irqreturn_t (*irq_handler)(int irq, void *dev_id);
+ int (*frontend_init)(struct mantis_pci *mantis, struct dvb_frontend *fe);
+
+ u8 power;
+ u8 reset;
+
+ enum mantis_i2c_mode i2c_mode;
+};
+
+struct mantis_pci {
+ unsigned int verbose;
+
+ /* PCI stuff */
+ u16 vendor_id;
+ u16 device_id;
+ u16 subsystem_vendor;
+ u16 subsystem_device;
+
+ u8 latency;
+
+ struct pci_dev *pdev;
+
+ unsigned long mantis_addr;
+ void __iomem *mmio;
+
+ u8 irq;
+ u8 revision;
+
+ unsigned int num;
+
+ /* RISC Core */
+ u32 busy_block;
+ u32 last_block;
+ u8 *buf_cpu;
+ dma_addr_t buf_dma;
+ u32 *risc_cpu;
+ dma_addr_t risc_dma;
+
+ struct tasklet_struct tasklet;
+
+ struct i2c_adapter adapter;
+ int i2c_rc;
+ wait_queue_head_t i2c_wq;
+ struct mutex i2c_lock;
+
+ /* DVB stuff */
+ struct dvb_adapter dvb_adapter;
+ struct dvb_frontend *fe;
+ struct dvb_demux demux;
+ struct dmxdev dmxdev;
+ struct dmx_frontend fe_hw;
+ struct dmx_frontend fe_mem;
+ struct dvb_net dvbnet;
+
+ u8 feeds;
+
+ struct mantis_hwconfig *hwconfig;
+
+ u32 mantis_int_stat;
+ u32 mantis_int_mask;
+
+ /* board specific */
+ u8 mac_address[8];
+ u32 sub_vendor_id;
+ u32 sub_device_id;
+
+ /* A12 A13 A14 */
+ u32 gpio_status;
+
+ u32 gpif_status;
+
+ struct mantis_ca *mantis_ca;
+
+ wait_queue_head_t uart_wq;
+ struct work_struct uart_work;
+ spinlock_t uart_lock;
+
+ struct rc_dev *rc;
+ char input_name[80];
+ char input_phys[80];
+};
+
+#define MANTIS_HIF_STATUS (mantis->gpio_status)
+
+#endif /* __MANTIS_COMMON_H */
diff --git a/drivers/media/pci/mantis/mantis_core.c b/drivers/media/pci/mantis/mantis_core.c
new file mode 100644
index 000000000000..684d9061fe2a
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_core.c
@@ -0,0 +1,235 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "mantis_common.h"
+#include "mantis_core.h"
+#include "mantis_vp1033.h"
+#include "mantis_vp1034.h"
+#include "mantis_vp1041.h"
+#include "mantis_vp2033.h"
+#include "mantis_vp2040.h"
+#include "mantis_vp3030.h"
+
+static int read_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length)
+{
+ int err;
+ struct i2c_msg msg[] = {
+ {
+ .addr = 0x50,
+ .flags = 0,
+ .buf = data,
+ .len = 1
+ }, {
+ .addr = 0x50,
+ .flags = I2C_M_RD,
+ .buf = data,
+ .len = length
+ },
+ };
+
+ err = i2c_transfer(&mantis->adapter, msg, 2);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_ERROR, 1,
+ "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >",
+ err, data[0], data[1]);
+
+ return err;
+ }
+
+ return 0;
+}
+
+static int write_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length)
+{
+ int err;
+
+ struct i2c_msg msg = {
+ .addr = 0x50,
+ .flags = 0,
+ .buf = data,
+ .len = length
+ };
+
+ err = i2c_transfer(&mantis->adapter, &msg, 1);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_ERROR, 1,
+ "ERROR: i2c write: < err=%i length=0x%02x d0=0x%02x, d1=0x%02x >",
+ err, length, data[0], data[1]);
+
+ return err;
+ }
+
+ return 0;
+}
+
+static int get_mac_address(struct mantis_pci *mantis)
+{
+ int err;
+
+ mantis->mac_address[0] = 0x08;
+ err = read_eeprom_byte(mantis, &mantis->mac_address[0], 6);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_ERROR, 1, "Mantis EEPROM read error");
+
+ return err;
+ }
+ dprintk(verbose, MANTIS_ERROR, 0,
+ " MAC Address=[%pM]\n", mantis->mac_address);
+
+ return 0;
+}
+
+#define MANTIS_MODEL_UNKNOWN "UNKNOWN"
+#define MANTIS_DEV_UNKNOWN "UNKNOWN"
+
+struct mantis_hwconfig unknown_device = {
+ .model_name = MANTIS_MODEL_UNKNOWN,
+ .dev_type = MANTIS_DEV_UNKNOWN,
+};
+
+static void mantis_load_config(struct mantis_pci *mantis)
+{
+ switch (mantis->subsystem_device) {
+ case MANTIS_VP_1033_DVB_S: /* VP-1033 */
+ mantis->hwconfig = &vp1033_mantis_config;
+ break;
+ case MANTIS_VP_1034_DVB_S: /* VP-1034 */
+ mantis->hwconfig = &vp1034_mantis_config;
+ break;
+ case MANTIS_VP_1041_DVB_S2: /* VP-1041 */
+ case TECHNISAT_SKYSTAR_HD2:
+ mantis->hwconfig = &vp1041_mantis_config;
+ break;
+ case MANTIS_VP_2033_DVB_C: /* VP-2033 */
+ mantis->hwconfig = &vp2033_mantis_config;
+ break;
+ case MANTIS_VP_2040_DVB_C: /* VP-2040 */
+ case CINERGY_C: /* VP-2040 clone */
+ case TECHNISAT_CABLESTAR_HD2:
+ mantis->hwconfig = &vp2040_mantis_config;
+ break;
+ case MANTIS_VP_3030_DVB_T: /* VP-3030 */
+ mantis->hwconfig = &vp3030_mantis_config;
+ break;
+ default:
+ mantis->hwconfig = &unknown_device;
+ break;
+ }
+}
+
+int mantis_core_init(struct mantis_pci *mantis)
+{
+ int err = 0;
+
+ mantis_load_config(mantis);
+ dprintk(verbose, MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n",
+ mantis->hwconfig->model_name, mantis->hwconfig->dev_type,
+ mantis->pdev->bus->number, PCI_SLOT(mantis->pdev->devfn), PCI_FUNC(mantis->pdev->devfn));
+ dprintk(verbose, MANTIS_ERROR, 0, " Mantis Rev %d [%04x:%04x], ",
+ mantis->revision,
+ mantis->subsystem_vendor, mantis->subsystem_device);
+ dprintk(verbose, MANTIS_ERROR, 0,
+ "irq: %d, latency: %d\n memory: 0x%lx, mmio: 0x%p\n",
+ mantis->pdev->irq, mantis->latency,
+ mantis->mantis_addr, mantis->mantis_mmio);
+
+ err = mantis_i2c_init(mantis);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_ERROR, 1, "Mantis I2C init failed");
+ return err;
+ }
+ err = get_mac_address(mantis);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_ERROR, 1, "get MAC address failed");
+ return err;
+ }
+ err = mantis_dma_init(mantis);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_ERROR, 1, "Mantis DMA init failed");
+ return err;
+ }
+ err = mantis_dvb_init(mantis);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_DEBUG, 1, "Mantis DVB init failed");
+ return err;
+ }
+ err = mantis_uart_init(mantis);
+ if (err < 0) {
+ dprintk(verbose, MANTIS_DEBUG, 1, "Mantis UART init failed");
+ return err;
+ }
+
+ return 0;
+}
+
+int mantis_core_exit(struct mantis_pci *mantis)
+{
+ mantis_dma_stop(mantis);
+ dprintk(verbose, MANTIS_ERROR, 1, "DMA engine stopping");
+
+ mantis_uart_exit(mantis);
+ dprintk(verbose, MANTIS_ERROR, 1, "UART exit failed");
+
+ if (mantis_dma_exit(mantis) < 0)
+ dprintk(verbose, MANTIS_ERROR, 1, "DMA exit failed");
+ if (mantis_dvb_exit(mantis) < 0)
+ dprintk(verbose, MANTIS_ERROR, 1, "DVB exit failed");
+ if (mantis_i2c_exit(mantis) < 0)
+ dprintk(verbose, MANTIS_ERROR, 1, "I2C adapter delete.. failed");
+
+ return 0;
+}
+
+/* Turn the given bit on or off. */
+void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
+{
+ u32 cur;
+
+ cur = mmread(MANTIS_GPIF_ADDR);
+ if (value)
+ mantis->gpio_status = cur | (1 << bitpos);
+ else
+ mantis->gpio_status = cur & (~(1 << bitpos));
+
+ mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR);
+ mmwrite(0x00, MANTIS_GPIF_DOUT);
+ udelay(100);
+}
+
+/* direction = 0 , no CI passthrough ; 1 , CI passthrough */
+void mantis_set_direction(struct mantis_pci *mantis, int direction)
+{
+ u32 reg;
+
+ reg = mmread(0x28);
+ dprintk(verbose, MANTIS_DEBUG, 1, "TS direction setup");
+ if (direction == 0x01) {
+ /* to CI */
+ reg |= 0x04;
+ mmwrite(reg, 0x28);
+ reg &= 0xff - 0x04;
+ mmwrite(reg, 0x28);
+ } else {
+ reg &= 0xff - 0x04;
+ mmwrite(reg, 0x28);
+ reg |= 0x04;
+ mmwrite(reg, 0x28);
+ }
+}
diff --git a/drivers/media/pci/mantis/mantis_core.h b/drivers/media/pci/mantis/mantis_core.h
new file mode 100644
index 000000000000..833ee42e694e
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_core.h
@@ -0,0 +1,57 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_CORE_H
+#define __MANTIS_CORE_H
+
+#include "mantis_common.h"
+
+
+#define FE_TYPE_SAT 0
+#define FE_TYPE_CAB 1
+#define FE_TYPE_TER 2
+
+#define FE_TYPE_TS204 0
+#define FE_TYPE_TS188 1
+
+
+struct vendorname {
+ u8 *sub_vendor_name;
+ u32 sub_vendor_id;
+};
+
+struct devicetype {
+ u8 *sub_device_name;
+ u32 sub_device_id;
+ u8 device_type;
+ u32 type_flags;
+};
+
+
+extern int mantis_dma_init(struct mantis_pci *mantis);
+extern int mantis_dma_exit(struct mantis_pci *mantis);
+extern void mantis_dma_start(struct mantis_pci *mantis);
+extern void mantis_dma_stop(struct mantis_pci *mantis);
+extern int mantis_i2c_init(struct mantis_pci *mantis);
+extern int mantis_i2c_exit(struct mantis_pci *mantis);
+extern int mantis_core_init(struct mantis_pci *mantis);
+extern int mantis_core_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_CORE_H */
diff --git a/drivers/media/pci/mantis/mantis_dma.c b/drivers/media/pci/mantis/mantis_dma.c
new file mode 100644
index 000000000000..566c407175a4
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_dma.c
@@ -0,0 +1,230 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <asm/page.h>
+#include <linux/vmalloc.h>
+#include <linux/pci.h>
+
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_dma.h"
+
+#define RISC_WRITE (0x01 << 28)
+#define RISC_JUMP (0x07 << 28)
+#define RISC_IRQ (0x01 << 24)
+
+#define RISC_STATUS(status) ((((~status) & 0x0f) << 20) | ((status & 0x0f) << 16))
+#define RISC_FLUSH(risc_pos) (risc_pos = 0)
+#define RISC_INSTR(risc_pos, opcode) (mantis->risc_cpu[risc_pos++] = cpu_to_le32(opcode))
+
+#define MANTIS_BUF_SIZE (64 * 1024)
+#define MANTIS_BLOCK_BYTES (MANTIS_BUF_SIZE / 4)
+#define MANTIS_DMA_TR_BYTES (2 * 1024) /* upper limit: 4095 bytes. */
+#define MANTIS_BLOCK_COUNT (MANTIS_BUF_SIZE / MANTIS_BLOCK_BYTES)
+
+#define MANTIS_DMA_TR_UNITS (MANTIS_BLOCK_BYTES / MANTIS_DMA_TR_BYTES)
+/* MANTIS_BUF_SIZE / MANTIS_DMA_TR_UNITS must not exceed MANTIS_RISC_SIZE (4k RISC cmd buffer) */
+#define MANTIS_RISC_SIZE PAGE_SIZE /* RISC program must fit here. */
+
+int mantis_dma_exit(struct mantis_pci *mantis)
+{
+ if (mantis->buf_cpu) {
+ dprintk(MANTIS_ERROR, 1,
+ "DMA=0x%lx cpu=0x%p size=%d",
+ (unsigned long) mantis->buf_dma,
+ mantis->buf_cpu,
+ MANTIS_BUF_SIZE);
+
+ pci_free_consistent(mantis->pdev, MANTIS_BUF_SIZE,
+ mantis->buf_cpu, mantis->buf_dma);
+
+ mantis->buf_cpu = NULL;
+ }
+ if (mantis->risc_cpu) {
+ dprintk(MANTIS_ERROR, 1,
+ "RISC=0x%lx cpu=0x%p size=%lx",
+ (unsigned long) mantis->risc_dma,
+ mantis->risc_cpu,
+ MANTIS_RISC_SIZE);
+
+ pci_free_consistent(mantis->pdev, MANTIS_RISC_SIZE,
+ mantis->risc_cpu, mantis->risc_dma);
+
+ mantis->risc_cpu = NULL;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_dma_exit);
+
+static inline int mantis_alloc_buffers(struct mantis_pci *mantis)
+{
+ if (!mantis->buf_cpu) {
+ mantis->buf_cpu = pci_alloc_consistent(mantis->pdev,
+ MANTIS_BUF_SIZE,
+ &mantis->buf_dma);
+ if (!mantis->buf_cpu) {
+ dprintk(MANTIS_ERROR, 1,
+ "DMA buffer allocation failed");
+
+ goto err;
+ }
+ dprintk(MANTIS_ERROR, 1,
+ "DMA=0x%lx cpu=0x%p size=%d",
+ (unsigned long) mantis->buf_dma,
+ mantis->buf_cpu, MANTIS_BUF_SIZE);
+ }
+ if (!mantis->risc_cpu) {
+ mantis->risc_cpu = pci_alloc_consistent(mantis->pdev,
+ MANTIS_RISC_SIZE,
+ &mantis->risc_dma);
+
+ if (!mantis->risc_cpu) {
+ dprintk(MANTIS_ERROR, 1,
+ "RISC program allocation failed");
+
+ mantis_dma_exit(mantis);
+
+ goto err;
+ }
+ dprintk(MANTIS_ERROR, 1,
+ "RISC=0x%lx cpu=0x%p size=%lx",
+ (unsigned long) mantis->risc_dma,
+ mantis->risc_cpu, MANTIS_RISC_SIZE);
+ }
+
+ return 0;
+err:
+ dprintk(MANTIS_ERROR, 1, "Out of memory (?) .....");
+ return -ENOMEM;
+}
+
+int mantis_dma_init(struct mantis_pci *mantis)
+{
+ int err = 0;
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis DMA init");
+ if (mantis_alloc_buffers(mantis) < 0) {
+ dprintk(MANTIS_ERROR, 1, "Error allocating DMA buffer");
+
+ /* Stop RISC Engine */
+ mmwrite(0, MANTIS_DMA_CTL);
+
+ goto err;
+ }
+
+ return 0;
+err:
+ return err;
+}
+EXPORT_SYMBOL_GPL(mantis_dma_init);
+
+static inline void mantis_risc_program(struct mantis_pci *mantis)
+{
+ u32 buf_pos = 0;
+ u32 line, step;
+ u32 risc_pos;
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis create RISC program");
+ RISC_FLUSH(risc_pos);
+
+ dprintk(MANTIS_DEBUG, 1, "risc len lines %u, bytes per line %u, bytes per DMA tr %u",
+ MANTIS_BLOCK_COUNT, MANTIS_BLOCK_BYTES, MANTIS_DMA_TR_BYTES);
+
+ for (line = 0; line < MANTIS_BLOCK_COUNT; line++) {
+ for (step = 0; step < MANTIS_DMA_TR_UNITS; step++) {
+ dprintk(MANTIS_DEBUG, 1, "RISC PROG line=[%d], step=[%d]", line, step);
+ if (step == 0) {
+ RISC_INSTR(risc_pos, RISC_WRITE |
+ RISC_IRQ |
+ RISC_STATUS(line) |
+ MANTIS_DMA_TR_BYTES);
+ } else {
+ RISC_INSTR(risc_pos, RISC_WRITE | MANTIS_DMA_TR_BYTES);
+ }
+ RISC_INSTR(risc_pos, mantis->buf_dma + buf_pos);
+ buf_pos += MANTIS_DMA_TR_BYTES;
+ }
+ }
+ RISC_INSTR(risc_pos, RISC_JUMP);
+ RISC_INSTR(risc_pos, mantis->risc_dma);
+}
+
+void mantis_dma_start(struct mantis_pci *mantis)
+{
+ dprintk(MANTIS_DEBUG, 1, "Mantis Start DMA engine");
+
+ mantis_risc_program(mantis);
+ mmwrite(mantis->risc_dma, MANTIS_RISC_START);
+ mmwrite(mmread(MANTIS_GPIF_ADDR) | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR);
+
+ mmwrite(0, MANTIS_DMA_CTL);
+ mantis->last_block = mantis->busy_block = 0;
+
+ mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_RISCI, MANTIS_INT_MASK);
+
+ mmwrite(MANTIS_FIFO_EN | MANTIS_DCAP_EN
+ | MANTIS_RISC_EN, MANTIS_DMA_CTL);
+
+}
+
+void mantis_dma_stop(struct mantis_pci *mantis)
+{
+ dprintk(MANTIS_DEBUG, 1, "Mantis Stop DMA engine");
+
+ mmwrite((mmread(MANTIS_GPIF_ADDR) & (~(MANTIS_GPIF_HIFRDWRN))), MANTIS_GPIF_ADDR);
+
+ mmwrite((mmread(MANTIS_DMA_CTL) & ~(MANTIS_FIFO_EN |
+ MANTIS_DCAP_EN |
+ MANTIS_RISC_EN)), MANTIS_DMA_CTL);
+
+ mmwrite(mmread(MANTIS_INT_STAT), MANTIS_INT_STAT);
+
+ mmwrite(mmread(MANTIS_INT_MASK) & ~(MANTIS_INT_RISCI |
+ MANTIS_INT_RISCEN), MANTIS_INT_MASK);
+}
+
+
+void mantis_dma_xfer(unsigned long data)
+{
+ struct mantis_pci *mantis = (struct mantis_pci *) data;
+ struct mantis_hwconfig *config = mantis->hwconfig;
+
+ while (mantis->last_block != mantis->busy_block) {
+ dprintk(MANTIS_DEBUG, 1, "last block=[%d] finished block=[%d]",
+ mantis->last_block, mantis->busy_block);
+
+ (config->ts_size ? dvb_dmx_swfilter_204 : dvb_dmx_swfilter)
+ (&mantis->demux, &mantis->buf_cpu[mantis->last_block * MANTIS_BLOCK_BYTES], MANTIS_BLOCK_BYTES);
+ mantis->last_block = (mantis->last_block + 1) % MANTIS_BLOCK_COUNT;
+ }
+}
diff --git a/drivers/media/pci/mantis/mantis_dma.h b/drivers/media/pci/mantis/mantis_dma.h
new file mode 100644
index 000000000000..6be00fa82094
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_dma.h
@@ -0,0 +1,30 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_DMA_H
+#define __MANTIS_DMA_H
+
+extern int mantis_dma_init(struct mantis_pci *mantis);
+extern int mantis_dma_exit(struct mantis_pci *mantis);
+extern void mantis_dma_start(struct mantis_pci *mantis);
+extern void mantis_dma_stop(struct mantis_pci *mantis);
+extern void mantis_dma_xfer(unsigned long data);
+
+#endif /* __MANTIS_DMA_H */
diff --git a/drivers/media/pci/mantis/mantis_dvb.c b/drivers/media/pci/mantis/mantis_dvb.c
new file mode 100644
index 000000000000..5d15c6b74d9b
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_dvb.c
@@ -0,0 +1,301 @@
+/*
+ Mantis PCI bridge driver
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_dma.h"
+#include "mantis_ca.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power)
+{
+ struct mantis_hwconfig *config = mantis->hwconfig;
+
+ switch (power) {
+ case POWER_ON:
+ dprintk(MANTIS_DEBUG, 1, "Power ON");
+ mantis_gpio_set_bits(mantis, config->power, POWER_ON);
+ msleep(100);
+ mantis_gpio_set_bits(mantis, config->power, POWER_ON);
+ msleep(100);
+ break;
+
+ case POWER_OFF:
+ dprintk(MANTIS_DEBUG, 1, "Power OFF");
+ mantis_gpio_set_bits(mantis, config->power, POWER_OFF);
+ msleep(100);
+ break;
+
+ default:
+ dprintk(MANTIS_DEBUG, 1, "Unknown state <%02x>", power);
+ return -1;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_frontend_power);
+
+void mantis_frontend_soft_reset(struct mantis_pci *mantis)
+{
+ struct mantis_hwconfig *config = mantis->hwconfig;
+
+ dprintk(MANTIS_DEBUG, 1, "Frontend RESET");
+ mantis_gpio_set_bits(mantis, config->reset, 0);
+ msleep(100);
+ mantis_gpio_set_bits(mantis, config->reset, 0);
+ msleep(100);
+ mantis_gpio_set_bits(mantis, config->reset, 1);
+ msleep(100);
+ mantis_gpio_set_bits(mantis, config->reset, 1);
+ msleep(100);
+
+ return;
+}
+EXPORT_SYMBOL_GPL(mantis_frontend_soft_reset);
+
+static int mantis_frontend_shutdown(struct mantis_pci *mantis)
+{
+ int err;
+
+ mantis_frontend_soft_reset(mantis);
+ err = mantis_frontend_power(mantis, POWER_OFF);
+ if (err != 0) {
+ dprintk(MANTIS_ERROR, 1, "Frontend POWER OFF failed! <%d>", err);
+ return 1;
+ }
+
+ return 0;
+}
+
+static int mantis_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
+ struct mantis_pci *mantis = dvbdmx->priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis DVB Start feed");
+ if (!dvbdmx->dmx.frontend) {
+ dprintk(MANTIS_DEBUG, 1, "no frontend ?");
+ return -EINVAL;
+ }
+
+ mantis->feeds++;
+ dprintk(MANTIS_DEBUG, 1, "mantis start feed, feeds=%d", mantis->feeds);
+
+ if (mantis->feeds == 1) {
+ dprintk(MANTIS_DEBUG, 1, "mantis start feed & dma");
+ mantis_dma_start(mantis);
+ tasklet_enable(&mantis->tasklet);
+ }
+
+ return mantis->feeds;
+}
+
+static int mantis_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
+ struct mantis_pci *mantis = dvbdmx->priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis DVB Stop feed");
+ if (!dvbdmx->dmx.frontend) {
+ dprintk(MANTIS_DEBUG, 1, "no frontend ?");
+ return -EINVAL;
+ }
+
+ mantis->feeds--;
+ if (mantis->feeds == 0) {
+ dprintk(MANTIS_DEBUG, 1, "mantis stop feed and dma");
+ tasklet_disable(&mantis->tasklet);
+ mantis_dma_stop(mantis);
+ }
+
+ return 0;
+}
+
+int __devinit mantis_dvb_init(struct mantis_pci *mantis)
+{
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ int result = -1;
+
+ dprintk(MANTIS_DEBUG, 1, "dvb_register_adapter");
+
+ result = dvb_register_adapter(&mantis->dvb_adapter,
+ "Mantis DVB adapter",
+ THIS_MODULE,
+ &mantis->pdev->dev,
+ adapter_nr);
+
+ if (result < 0) {
+
+ dprintk(MANTIS_ERROR, 1, "Error registering adapter");
+ return -ENODEV;
+ }
+
+ mantis->dvb_adapter.priv = mantis;
+ mantis->demux.dmx.capabilities = DMX_TS_FILTERING |
+ DMX_SECTION_FILTERING |
+ DMX_MEMORY_BASED_FILTERING;
+
+ mantis->demux.priv = mantis;
+ mantis->demux.filternum = 256;
+ mantis->demux.feednum = 256;
+ mantis->demux.start_feed = mantis_dvb_start_feed;
+ mantis->demux.stop_feed = mantis_dvb_stop_feed;
+ mantis->demux.write_to_decoder = NULL;
+
+ dprintk(MANTIS_DEBUG, 1, "dvb_dmx_init");
+ result = dvb_dmx_init(&mantis->demux);
+ if (result < 0) {
+ dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
+
+ goto err0;
+ }
+
+ mantis->dmxdev.filternum = 256;
+ mantis->dmxdev.demux = &mantis->demux.dmx;
+ mantis->dmxdev.capabilities = 0;
+ dprintk(MANTIS_DEBUG, 1, "dvb_dmxdev_init");
+
+ result = dvb_dmxdev_init(&mantis->dmxdev, &mantis->dvb_adapter);
+ if (result < 0) {
+
+ dprintk(MANTIS_ERROR, 1, "dvb_dmxdev_init failed, ERROR=%d", result);
+ goto err1;
+ }
+
+ mantis->fe_hw.source = DMX_FRONTEND_0;
+ result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx, &mantis->fe_hw);
+ if (result < 0) {
+
+ dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
+ goto err2;
+ }
+
+ mantis->fe_mem.source = DMX_MEMORY_FE;
+ result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx, &mantis->fe_mem);
+ if (result < 0) {
+ dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
+ goto err3;
+ }
+
+ result = mantis->demux.dmx.connect_frontend(&mantis->demux.dmx, &mantis->fe_hw);
+ if (result < 0) {
+ dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
+ goto err4;
+ }
+
+ dvb_net_init(&mantis->dvb_adapter, &mantis->dvbnet, &mantis->demux.dmx);
+ tasklet_init(&mantis->tasklet, mantis_dma_xfer, (unsigned long) mantis);
+ tasklet_disable(&mantis->tasklet);
+ if (mantis->hwconfig) {
+ result = config->frontend_init(mantis, mantis->fe);
+ if (result < 0) {
+ dprintk(MANTIS_ERROR, 1, "!!! NO Frontends found !!!");
+ goto err5;
+ } else {
+ if (mantis->fe == NULL) {
+ dprintk(MANTIS_ERROR, 1, "FE <NULL>");
+ goto err5;
+ }
+
+ if (dvb_register_frontend(&mantis->dvb_adapter, mantis->fe)) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Frontend registration failed");
+
+ if (mantis->fe->ops.release)
+ mantis->fe->ops.release(mantis->fe);
+
+ mantis->fe = NULL;
+ goto err5;
+ }
+ }
+ }
+
+ return 0;
+
+ /* Error conditions .. */
+err5:
+ tasklet_kill(&mantis->tasklet);
+ dvb_net_release(&mantis->dvbnet);
+ if (mantis->fe) {
+ dvb_unregister_frontend(mantis->fe);
+ dvb_frontend_detach(mantis->fe);
+ }
+err4:
+ mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem);
+
+err3:
+ mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_hw);
+
+err2:
+ dvb_dmxdev_release(&mantis->dmxdev);
+
+err1:
+ dvb_dmx_release(&mantis->demux);
+
+err0:
+ dvb_unregister_adapter(&mantis->dvb_adapter);
+
+ return result;
+}
+EXPORT_SYMBOL_GPL(mantis_dvb_init);
+
+int __devexit mantis_dvb_exit(struct mantis_pci *mantis)
+{
+ int err;
+
+ if (mantis->fe) {
+ /* mantis_ca_exit(mantis); */
+ err = mantis_frontend_shutdown(mantis);
+ if (err != 0)
+ dprintk(MANTIS_ERROR, 1, "Frontend exit while POWER ON! <%d>", err);
+ dvb_unregister_frontend(mantis->fe);
+ dvb_frontend_detach(mantis->fe);
+ }
+
+ tasklet_kill(&mantis->tasklet);
+ dvb_net_release(&mantis->dvbnet);
+
+ mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem);
+ mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_hw);
+
+ dvb_dmxdev_release(&mantis->dmxdev);
+ dvb_dmx_release(&mantis->demux);
+
+ dprintk(MANTIS_DEBUG, 1, "dvb_unregister_adapter");
+ dvb_unregister_adapter(&mantis->dvb_adapter);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_dvb_exit);
diff --git a/drivers/media/pci/mantis/mantis_dvb.h b/drivers/media/pci/mantis/mantis_dvb.h
new file mode 100644
index 000000000000..464199db304e
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_dvb.h
@@ -0,0 +1,35 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_DVB_H
+#define __MANTIS_DVB_H
+
+enum mantis_power {
+ POWER_OFF = 0,
+ POWER_ON = 1
+};
+
+extern int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power);
+extern void mantis_frontend_soft_reset(struct mantis_pci *mantis);
+
+extern int mantis_dvb_init(struct mantis_pci *mantis);
+extern int mantis_dvb_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_DVB_H */
diff --git a/drivers/media/pci/mantis/mantis_evm.c b/drivers/media/pci/mantis/mantis_evm.c
new file mode 100644
index 000000000000..71ce52875c38
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_evm.c
@@ -0,0 +1,117 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_link.h"
+#include "mantis_hif.h"
+#include "mantis_reg.h"
+
+static void mantis_hifevm_work(struct work_struct *work)
+{
+ struct mantis_ca *ca = container_of(work, struct mantis_ca, hif_evm_work);
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ u32 gpif_stat;
+
+ gpif_stat = mmread(MANTIS_GPIF_STATUS);
+
+ if (gpif_stat & MANTIS_GPIF_DETSTAT) {
+ if (gpif_stat & MANTIS_CARD_PLUGIN) {
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Plugin", mantis->num);
+ mmwrite(0xdada0000, MANTIS_CARD_RESET);
+ mantis_event_cam_plugin(ca);
+ dvb_ca_en50221_camchange_irq(&ca->en50221,
+ 0,
+ DVB_CA_EN50221_CAMCHANGE_INSERTED);
+ }
+ } else {
+ if (gpif_stat & MANTIS_CARD_PLUGOUT) {
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Unplug", mantis->num);
+ mmwrite(0xdada0000, MANTIS_CARD_RESET);
+ mantis_event_cam_unplug(ca);
+ dvb_ca_en50221_camchange_irq(&ca->en50221,
+ 0,
+ DVB_CA_EN50221_CAMCHANGE_REMOVED);
+ }
+ }
+
+ if (mantis->gpif_status & MANTIS_GPIF_EXTIRQ)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Ext IRQ", mantis->num);
+
+ if (mantis->gpif_status & MANTIS_SBUF_WSTO)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Timeout", mantis->num);
+
+ if (mantis->gpif_status & MANTIS_GPIF_OTHERR)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Alignment Error", mantis->num);
+
+ if (gpif_stat & MANTIS_SBUF_OVFLW)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Overflow", mantis->num);
+
+ if (gpif_stat & MANTIS_GPIF_BRRDY)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Read Ready", mantis->num);
+
+ if (gpif_stat & MANTIS_GPIF_INTSTAT)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): GPIF IRQ", mantis->num);
+
+ if (gpif_stat & MANTIS_SBUF_EMPTY)
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Empty", mantis->num);
+
+ if (gpif_stat & MANTIS_SBUF_OPDONE) {
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer operation complete", mantis->num);
+ ca->sbuf_status = MANTIS_SBUF_DATA_AVAIL;
+ ca->hif_event = MANTIS_SBUF_OPDONE;
+ wake_up(&ca->hif_opdone_wq);
+ }
+}
+
+int mantis_evmgr_init(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Initializing Mantis Host I/F Event manager");
+ INIT_WORK(&ca->hif_evm_work, mantis_hifevm_work);
+ mantis_pcmcia_init(ca);
+ schedule_work(&ca->hif_evm_work);
+ mantis_hif_init(ca);
+ return 0;
+}
+
+void mantis_evmgr_exit(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ dprintk(MANTIS_DEBUG, 1, "Mantis Host I/F Event manager exiting");
+ flush_work_sync(&ca->hif_evm_work);
+ mantis_hif_exit(ca);
+ mantis_pcmcia_exit(ca);
+}
diff --git a/drivers/media/pci/mantis/mantis_hif.c b/drivers/media/pci/mantis/mantis_hif.c
new file mode 100644
index 000000000000..10c68df7e16f
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_hif.c
@@ -0,0 +1,239 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+
+#include <linux/interrupt.h>
+#include <asm/io.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+
+#include "mantis_hif.h"
+#include "mantis_link.h" /* temporary due to physical layer stuff */
+
+#include "mantis_reg.h"
+
+
+static int mantis_hif_sbuf_opdone_wait(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+ int rc = 0;
+
+ if (wait_event_timeout(ca->hif_opdone_wq,
+ ca->hif_event & MANTIS_SBUF_OPDONE,
+ msecs_to_jiffies(500)) == -ERESTARTSYS) {
+
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Smart buffer operation timeout !", mantis->num);
+ rc = -EREMOTEIO;
+ }
+ dprintk(MANTIS_DEBUG, 1, "Smart Buffer Operation complete");
+ ca->hif_event &= ~MANTIS_SBUF_OPDONE;
+ return rc;
+}
+
+static int mantis_hif_write_wait(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 opdone = 0, timeout = 0;
+ int rc = 0;
+
+ if (wait_event_timeout(ca->hif_write_wq,
+ mantis->gpif_status & MANTIS_GPIF_WRACK,
+ msecs_to_jiffies(500)) == -ERESTARTSYS) {
+
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Write ACK timed out !", mantis->num);
+ rc = -EREMOTEIO;
+ }
+ dprintk(MANTIS_DEBUG, 1, "Write Acknowledged");
+ mantis->gpif_status &= ~MANTIS_GPIF_WRACK;
+ while (!opdone) {
+ opdone = (mmread(MANTIS_GPIF_STATUS) & MANTIS_SBUF_OPDONE);
+ udelay(500);
+ timeout++;
+ if (timeout > 100) {
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Write operation timed out!", mantis->num);
+ rc = -ETIMEDOUT;
+ break;
+ }
+ }
+ dprintk(MANTIS_DEBUG, 1, "HIF Write success");
+ return rc;
+}
+
+
+int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 hif_addr = 0, data, count = 4;
+
+ dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Read", mantis->num);
+ mutex_lock(&ca->ca_lock);
+ hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
+ hif_addr &= ~MANTIS_GPIF_PCMCIAIOM;
+ hif_addr |= MANTIS_HIF_STATUS;
+ hif_addr |= addr;
+
+ mmwrite(hif_addr, MANTIS_GPIF_BRADDR);
+ mmwrite(count, MANTIS_GPIF_BRBYTES);
+ udelay(20);
+ mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR);
+
+ if (mantis_hif_sbuf_opdone_wait(ca) != 0) {
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): GPIF Smart Buffer operation failed", mantis->num);
+ mutex_unlock(&ca->ca_lock);
+ return -EREMOTEIO;
+ }
+ data = mmread(MANTIS_GPIF_DIN);
+ mutex_unlock(&ca->ca_lock);
+ dprintk(MANTIS_DEBUG, 1, "Mem Read: 0x%02x", data);
+ return (data >> 24) & 0xff;
+}
+
+int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data)
+{
+ struct mantis_slot *slot = ca->slot;
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 hif_addr = 0;
+
+ dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Write", mantis->num);
+ mutex_lock(&ca->ca_lock);
+ hif_addr &= ~MANTIS_GPIF_HIFRDWRN;
+ hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
+ hif_addr &= ~MANTIS_GPIF_PCMCIAIOM;
+ hif_addr |= MANTIS_HIF_STATUS;
+ hif_addr |= addr;
+
+ mmwrite(slot->slave_cfg, MANTIS_GPIF_CFGSLA); /* Slot0 alone for now */
+ mmwrite(hif_addr, MANTIS_GPIF_ADDR);
+ mmwrite(data, MANTIS_GPIF_DOUT);
+
+ if (mantis_hif_write_wait(ca) != 0) {
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
+ mutex_unlock(&ca->ca_lock);
+ return -EREMOTEIO;
+ }
+ dprintk(MANTIS_DEBUG, 1, "Mem Write: (0x%02x to 0x%02x)", data, addr);
+ mutex_unlock(&ca->ca_lock);
+
+ return 0;
+}
+
+int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 data, hif_addr = 0;
+
+ dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Read", mantis->num);
+ mutex_lock(&ca->ca_lock);
+ hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
+ hif_addr |= MANTIS_GPIF_PCMCIAIOM;
+ hif_addr |= MANTIS_HIF_STATUS;
+ hif_addr |= addr;
+
+ mmwrite(hif_addr, MANTIS_GPIF_BRADDR);
+ mmwrite(1, MANTIS_GPIF_BRBYTES);
+ udelay(20);
+ mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR);
+
+ if (mantis_hif_sbuf_opdone_wait(ca) != 0) {
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
+ mutex_unlock(&ca->ca_lock);
+ return -EREMOTEIO;
+ }
+ data = mmread(MANTIS_GPIF_DIN);
+ dprintk(MANTIS_DEBUG, 1, "I/O Read: 0x%02x", data);
+ udelay(50);
+ mutex_unlock(&ca->ca_lock);
+
+ return (u8) data;
+}
+
+int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 hif_addr = 0;
+
+ dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Write", mantis->num);
+ mutex_lock(&ca->ca_lock);
+ hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
+ hif_addr &= ~MANTIS_GPIF_HIFRDWRN;
+ hif_addr |= MANTIS_GPIF_PCMCIAIOM;
+ hif_addr |= MANTIS_HIF_STATUS;
+ hif_addr |= addr;
+
+ mmwrite(hif_addr, MANTIS_GPIF_ADDR);
+ mmwrite(data, MANTIS_GPIF_DOUT);
+
+ if (mantis_hif_write_wait(ca) != 0) {
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
+ mutex_unlock(&ca->ca_lock);
+ return -EREMOTEIO;
+ }
+ dprintk(MANTIS_DEBUG, 1, "I/O Write: (0x%02x to 0x%02x)", data, addr);
+ mutex_unlock(&ca->ca_lock);
+ udelay(50);
+
+ return 0;
+}
+
+int mantis_hif_init(struct mantis_ca *ca)
+{
+ struct mantis_slot *slot = ca->slot;
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 irqcfg;
+
+ slot[0].slave_cfg = 0x70773028;
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Initializing Mantis Host Interface", mantis->num);
+
+ mutex_lock(&ca->ca_lock);
+ irqcfg = mmread(MANTIS_GPIF_IRQCFG);
+ irqcfg = MANTIS_MASK_BRRDY |
+ MANTIS_MASK_WRACK |
+ MANTIS_MASK_EXTIRQ |
+ MANTIS_MASK_WSTO |
+ MANTIS_MASK_OTHERR |
+ MANTIS_MASK_OVFLW;
+
+ mmwrite(irqcfg, MANTIS_GPIF_IRQCFG);
+ mutex_unlock(&ca->ca_lock);
+
+ return 0;
+}
+
+void mantis_hif_exit(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+ u32 irqcfg;
+
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Exiting Mantis Host Interface", mantis->num);
+ mutex_lock(&ca->ca_lock);
+ irqcfg = mmread(MANTIS_GPIF_IRQCFG);
+ irqcfg &= ~MANTIS_MASK_BRRDY;
+ mmwrite(irqcfg, MANTIS_GPIF_IRQCFG);
+ mutex_unlock(&ca->ca_lock);
+}
diff --git a/drivers/media/pci/mantis/mantis_hif.h b/drivers/media/pci/mantis/mantis_hif.h
new file mode 100644
index 000000000000..9094f9ed2362
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_hif.h
@@ -0,0 +1,29 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_HIF_H
+#define __MANTIS_HIF_H
+
+#define MANTIS_HIF_MEMRD 1
+#define MANTIS_HIF_MEMWR 2
+#define MANTIS_HIF_IOMRD 3
+#define MANTIS_HIF_IOMWR 4
+
+#endif /* __MANTIS_HIF_H */
diff --git a/drivers/media/pci/mantis/mantis_i2c.c b/drivers/media/pci/mantis/mantis_i2c.c
new file mode 100644
index 000000000000..e7794517fe26
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_i2c.c
@@ -0,0 +1,266 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <asm/io.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_i2c.h"
+
+#define TRIALS 10000
+
+static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg)
+{
+ u32 rxd, i, stat, trials;
+
+ dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] <R>[ ",
+ __func__, msg->addr);
+
+ for (i = 0; i < msg->len; i++) {
+ rxd = (msg->addr << 25) | (1 << 24)
+ | MANTIS_I2C_RATE_3
+ | MANTIS_I2C_STOP
+ | MANTIS_I2C_PGMODE;
+
+ if (i == (msg->len - 1))
+ rxd &= ~MANTIS_I2C_STOP;
+
+ mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT);
+ mmwrite(rxd, MANTIS_I2CDATA_CTL);
+
+ /* wait for xfer completion */
+ for (trials = 0; trials < TRIALS; trials++) {
+ stat = mmread(MANTIS_INT_STAT);
+ if (stat & MANTIS_INT_I2CDONE)
+ break;
+ }
+
+ dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials);
+
+ /* wait for xfer completion */
+ for (trials = 0; trials < TRIALS; trials++) {
+ stat = mmread(MANTIS_INT_STAT);
+ if (stat & MANTIS_INT_I2CRACK)
+ break;
+ }
+
+ dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials);
+
+ rxd = mmread(MANTIS_I2CDATA_CTL);
+ msg->buf[i] = (u8)((rxd >> 8) & 0xFF);
+ dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]);
+ }
+ dprintk(MANTIS_INFO, 0, "]\n");
+
+ return 0;
+}
+
+static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg)
+{
+ int i;
+ u32 txd = 0, stat, trials;
+
+ dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] <W>[ ",
+ __func__, msg->addr);
+
+ for (i = 0; i < msg->len; i++) {
+ dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]);
+ txd = (msg->addr << 25) | (msg->buf[i] << 8)
+ | MANTIS_I2C_RATE_3
+ | MANTIS_I2C_STOP
+ | MANTIS_I2C_PGMODE;
+
+ if (i == (msg->len - 1))
+ txd &= ~MANTIS_I2C_STOP;
+
+ mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT);
+ mmwrite(txd, MANTIS_I2CDATA_CTL);
+
+ /* wait for xfer completion */
+ for (trials = 0; trials < TRIALS; trials++) {
+ stat = mmread(MANTIS_INT_STAT);
+ if (stat & MANTIS_INT_I2CDONE)
+ break;
+ }
+
+ dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials);
+
+ /* wait for xfer completion */
+ for (trials = 0; trials < TRIALS; trials++) {
+ stat = mmread(MANTIS_INT_STAT);
+ if (stat & MANTIS_INT_I2CRACK)
+ break;
+ }
+
+ dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials);
+ }
+ dprintk(MANTIS_INFO, 0, "]\n");
+
+ return 0;
+}
+
+static int mantis_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num)
+{
+ int ret = 0, i = 0, trials;
+ u32 stat, data, txd;
+ struct mantis_pci *mantis;
+ struct mantis_hwconfig *config;
+
+ mantis = i2c_get_adapdata(adapter);
+ BUG_ON(!mantis);
+ config = mantis->hwconfig;
+ BUG_ON(!config);
+
+ dprintk(MANTIS_DEBUG, 1, "Messages:%d", num);
+ mutex_lock(&mantis->i2c_lock);
+
+ while (i < num) {
+ /* Byte MODE */
+ if ((config->i2c_mode & MANTIS_BYTE_MODE) &&
+ ((i + 1) < num) &&
+ (msgs[i].len < 2) &&
+ (msgs[i + 1].len < 2) &&
+ (msgs[i + 1].flags & I2C_M_RD)) {
+
+ dprintk(MANTIS_DEBUG, 0, " Byte MODE:\n");
+
+ /* Read operation */
+ txd = msgs[i].addr << 25 | (0x1 << 24)
+ | (msgs[i].buf[0] << 16)
+ | MANTIS_I2C_RATE_3;
+
+ mmwrite(txd, MANTIS_I2CDATA_CTL);
+ /* wait for xfer completion */
+ for (trials = 0; trials < TRIALS; trials++) {
+ stat = mmread(MANTIS_INT_STAT);
+ if (stat & MANTIS_INT_I2CDONE)
+ break;
+ }
+
+ /* check for xfer completion */
+ if (stat & MANTIS_INT_I2CDONE) {
+ /* check xfer was acknowledged */
+ if (stat & MANTIS_INT_I2CRACK) {
+ data = mmread(MANTIS_I2CDATA_CTL);
+ msgs[i + 1].buf[0] = (data >> 8) & 0xff;
+ dprintk(MANTIS_DEBUG, 0, " Byte <%d> RXD=0x%02x [%02x]\n", 0x0, data, msgs[i + 1].buf[0]);
+ } else {
+ /* I/O error */
+ dprintk(MANTIS_ERROR, 1, " I/O error, LINE:%d", __LINE__);
+ ret = -EIO;
+ break;
+ }
+ } else {
+ /* I/O error */
+ dprintk(MANTIS_ERROR, 1, " I/O error, LINE:%d", __LINE__);
+ ret = -EIO;
+ break;
+ }
+ i += 2; /* Write/Read operation in one go */
+ }
+
+ if (i < num) {
+ if (msgs[i].flags & I2C_M_RD)
+ ret = mantis_i2c_read(mantis, &msgs[i]);
+ else
+ ret = mantis_i2c_write(mantis, &msgs[i]);
+
+ i++;
+ if (ret < 0)
+ goto bail_out;
+ }
+
+ }
+
+ mutex_unlock(&mantis->i2c_lock);
+
+ return num;
+
+bail_out:
+ mutex_unlock(&mantis->i2c_lock);
+ return ret;
+}
+
+static u32 mantis_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm mantis_algo = {
+ .master_xfer = mantis_i2c_xfer,
+ .functionality = mantis_i2c_func,
+};
+
+int __devinit mantis_i2c_init(struct mantis_pci *mantis)
+{
+ u32 intstat, intmask;
+ struct i2c_adapter *i2c_adapter = &mantis->adapter;
+ struct pci_dev *pdev = mantis->pdev;
+
+ init_waitqueue_head(&mantis->i2c_wq);
+ mutex_init(&mantis->i2c_lock);
+ strncpy(i2c_adapter->name, "Mantis I2C", sizeof(i2c_adapter->name));
+ i2c_set_adapdata(i2c_adapter, mantis);
+
+ i2c_adapter->owner = THIS_MODULE;
+ i2c_adapter->algo = &mantis_algo;
+ i2c_adapter->algo_data = NULL;
+ i2c_adapter->timeout = 500;
+ i2c_adapter->retries = 3;
+ i2c_adapter->dev.parent = &pdev->dev;
+
+ mantis->i2c_rc = i2c_add_adapter(i2c_adapter);
+ if (mantis->i2c_rc < 0)
+ return mantis->i2c_rc;
+
+ dprintk(MANTIS_DEBUG, 1, "Initializing I2C ..");
+
+ intstat = mmread(MANTIS_INT_STAT);
+ intmask = mmread(MANTIS_INT_MASK);
+ mmwrite(intstat, MANTIS_INT_STAT);
+ dprintk(MANTIS_DEBUG, 1, "Disabling I2C interrupt");
+ intmask = mmread(MANTIS_INT_MASK);
+ mmwrite((intmask & ~MANTIS_INT_I2CDONE), MANTIS_INT_MASK);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_i2c_init);
+
+int mantis_i2c_exit(struct mantis_pci *mantis)
+{
+ u32 intmask;
+
+ dprintk(MANTIS_DEBUG, 1, "Disabling I2C interrupt");
+ intmask = mmread(MANTIS_INT_MASK);
+ mmwrite((intmask & ~MANTIS_INT_I2CDONE), MANTIS_INT_MASK);
+
+ dprintk(MANTIS_DEBUG, 1, "Removing I2C adapter");
+ return i2c_del_adapter(&mantis->adapter);
+}
+EXPORT_SYMBOL_GPL(mantis_i2c_exit);
diff --git a/drivers/media/pci/mantis/mantis_i2c.h b/drivers/media/pci/mantis/mantis_i2c.h
new file mode 100644
index 000000000000..1342df2faed8
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_i2c.h
@@ -0,0 +1,30 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_I2C_H
+#define __MANTIS_I2C_H
+
+#define I2C_STOP (1 << 0)
+#define I2C_READ (1 << 1)
+
+extern int mantis_i2c_init(struct mantis_pci *mantis);
+extern int mantis_i2c_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_I2C_H */
diff --git a/drivers/media/pci/mantis/mantis_input.c b/drivers/media/pci/mantis/mantis_input.c
new file mode 100644
index 000000000000..db6d54d3fec0
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_input.c
@@ -0,0 +1,159 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <media/rc-core.h>
+#include <linux/pci.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_uart.h"
+
+#define MODULE_NAME "mantis_core"
+#define RC_MAP_MANTIS "rc-mantis"
+
+static struct rc_map_table mantis_ir_table[] = {
+ { 0x29, KEY_POWER },
+ { 0x28, KEY_FAVORITES },
+ { 0x30, KEY_TEXT },
+ { 0x17, KEY_INFO }, /* Preview */
+ { 0x23, KEY_EPG },
+ { 0x3b, KEY_F22 }, /* Record List */
+ { 0x3c, KEY_1 },
+ { 0x3e, KEY_2 },
+ { 0x39, KEY_3 },
+ { 0x36, KEY_4 },
+ { 0x22, KEY_5 },
+ { 0x20, KEY_6 },
+ { 0x32, KEY_7 },
+ { 0x26, KEY_8 },
+ { 0x24, KEY_9 },
+ { 0x2a, KEY_0 },
+
+ { 0x33, KEY_CANCEL },
+ { 0x2c, KEY_BACK },
+ { 0x15, KEY_CLEAR },
+ { 0x3f, KEY_TAB },
+ { 0x10, KEY_ENTER },
+ { 0x14, KEY_UP },
+ { 0x0d, KEY_RIGHT },
+ { 0x0e, KEY_DOWN },
+ { 0x11, KEY_LEFT },
+
+ { 0x21, KEY_VOLUMEUP },
+ { 0x35, KEY_VOLUMEDOWN },
+ { 0x3d, KEY_CHANNELDOWN },
+ { 0x3a, KEY_CHANNELUP },
+ { 0x2e, KEY_RECORD },
+ { 0x2b, KEY_PLAY },
+ { 0x13, KEY_PAUSE },
+ { 0x25, KEY_STOP },
+
+ { 0x1f, KEY_REWIND },
+ { 0x2d, KEY_FASTFORWARD },
+ { 0x1e, KEY_PREVIOUS }, /* Replay |< */
+ { 0x1d, KEY_NEXT }, /* Skip >| */
+
+ { 0x0b, KEY_CAMERA }, /* Capture */
+ { 0x0f, KEY_LANGUAGE }, /* SAP */
+ { 0x18, KEY_MODE }, /* PIP */
+ { 0x12, KEY_ZOOM }, /* Full screen */
+ { 0x1c, KEY_SUBTITLE },
+ { 0x2f, KEY_MUTE },
+ { 0x16, KEY_F20 }, /* L/R */
+ { 0x38, KEY_F21 }, /* Hibernate */
+
+ { 0x37, KEY_SWITCHVIDEOMODE }, /* A/V */
+ { 0x31, KEY_AGAIN }, /* Recall */
+ { 0x1a, KEY_KPPLUS }, /* Zoom+ */
+ { 0x19, KEY_KPMINUS }, /* Zoom- */
+ { 0x27, KEY_RED },
+ { 0x0C, KEY_GREEN },
+ { 0x01, KEY_YELLOW },
+ { 0x00, KEY_BLUE },
+};
+
+static struct rc_map_list ir_mantis_map = {
+ .map = {
+ .scan = mantis_ir_table,
+ .size = ARRAY_SIZE(mantis_ir_table),
+ .rc_type = RC_TYPE_UNKNOWN,
+ .name = RC_MAP_MANTIS,
+ }
+};
+
+int mantis_input_init(struct mantis_pci *mantis)
+{
+ struct rc_dev *dev;
+ int err;
+
+ err = rc_map_register(&ir_mantis_map);
+ if (err)
+ goto out;
+
+ dev = rc_allocate_device();
+ if (!dev) {
+ dprintk(MANTIS_ERROR, 1, "Remote device allocation failed");
+ err = -ENOMEM;
+ goto out_map;
+ }
+
+ sprintf(mantis->input_name, "Mantis %s IR receiver", mantis->hwconfig->model_name);
+ sprintf(mantis->input_phys, "pci-%s/ir0", pci_name(mantis->pdev));
+
+ dev->input_name = mantis->input_name;
+ dev->input_phys = mantis->input_phys;
+ dev->input_id.bustype = BUS_PCI;
+ dev->input_id.vendor = mantis->vendor_id;
+ dev->input_id.product = mantis->device_id;
+ dev->input_id.version = 1;
+ dev->driver_name = MODULE_NAME;
+ dev->map_name = RC_MAP_MANTIS;
+ dev->dev.parent = &mantis->pdev->dev;
+
+ err = rc_register_device(dev);
+ if (err) {
+ dprintk(MANTIS_ERROR, 1, "IR device registration failed, ret = %d", err);
+ goto out_dev;
+ }
+
+ mantis->rc = dev;
+ return 0;
+
+out_dev:
+ rc_free_device(dev);
+out_map:
+ rc_map_unregister(&ir_mantis_map);
+out:
+ return err;
+}
+
+int mantis_exit(struct mantis_pci *mantis)
+{
+ rc_unregister_device(mantis->rc);
+ rc_map_unregister(&ir_mantis_map);
+ return 0;
+}
+
diff --git a/drivers/media/pci/mantis/mantis_ioc.c b/drivers/media/pci/mantis/mantis_ioc.c
new file mode 100644
index 000000000000..24fcdc63d6d5
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_ioc.c
@@ -0,0 +1,124 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_ioc.h"
+
+static int read_eeprom_bytes(struct mantis_pci *mantis, u8 reg, u8 *data, u8 length)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+ int err;
+ u8 buf = reg;
+
+ struct i2c_msg msg[] = {
+ { .addr = 0x50, .flags = 0, .buf = &buf, .len = 1 },
+ { .addr = 0x50, .flags = I2C_M_RD, .buf = data, .len = length },
+ };
+
+ err = i2c_transfer(adapter, msg, 2);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >",
+ err, data[0], data[1]);
+
+ return err;
+ }
+
+ return 0;
+}
+int mantis_get_mac(struct mantis_pci *mantis)
+{
+ int err;
+ u8 mac_addr[6] = {0};
+
+ err = read_eeprom_bytes(mantis, 0x08, mac_addr, 6);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis EEPROM read error <%d>", err);
+
+ return err;
+ }
+
+ dprintk(MANTIS_ERROR, 0, " MAC Address=[%pM]\n", mac_addr);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_get_mac);
+
+/* Turn the given bit on or off. */
+void mantis_gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
+{
+ u32 cur;
+
+ dprintk(MANTIS_DEBUG, 1, "Set Bit <%d> to <%d>", bitpos, value);
+ cur = mmread(MANTIS_GPIF_ADDR);
+ if (value)
+ mantis->gpio_status = cur | (1 << bitpos);
+ else
+ mantis->gpio_status = cur & (~(1 << bitpos));
+
+ dprintk(MANTIS_DEBUG, 1, "GPIO Value <%02x>", mantis->gpio_status);
+ mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR);
+ mmwrite(0x00, MANTIS_GPIF_DOUT);
+}
+EXPORT_SYMBOL_GPL(mantis_gpio_set_bits);
+
+int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl)
+{
+ u32 reg;
+
+ reg = mmread(MANTIS_CONTROL);
+ switch (stream_ctl) {
+ case STREAM_TO_HIF:
+ dprintk(MANTIS_DEBUG, 1, "Set stream to HIF");
+ reg &= 0xff - MANTIS_BYPASS;
+ mmwrite(reg, MANTIS_CONTROL);
+ reg |= MANTIS_BYPASS;
+ mmwrite(reg, MANTIS_CONTROL);
+ break;
+
+ case STREAM_TO_CAM:
+ dprintk(MANTIS_DEBUG, 1, "Set stream to CAM");
+ reg |= MANTIS_BYPASS;
+ mmwrite(reg, MANTIS_CONTROL);
+ reg &= 0xff - MANTIS_BYPASS;
+ mmwrite(reg, MANTIS_CONTROL);
+ break;
+ default:
+ dprintk(MANTIS_ERROR, 1, "Unknown MODE <%02x>", stream_ctl);
+ return -1;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_stream_control);
diff --git a/drivers/media/pci/mantis/mantis_ioc.h b/drivers/media/pci/mantis/mantis_ioc.h
new file mode 100644
index 000000000000..d56e002b2955
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_ioc.h
@@ -0,0 +1,51 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_IOC_H
+#define __MANTIS_IOC_H
+
+#define GPIF_A00 0x00
+#define GPIF_A01 0x01
+#define GPIF_A02 0x02
+#define GPIF_A03 0x03
+#define GPIF_A04 0x04
+#define GPIF_A05 0x05
+#define GPIF_A06 0x06
+#define GPIF_A07 0x07
+#define GPIF_A08 0x08
+#define GPIF_A09 0x09
+#define GPIF_A10 0x0a
+#define GPIF_A11 0x0b
+
+#define GPIF_A12 0x0c
+#define GPIF_A13 0x0d
+#define GPIF_A14 0x0e
+
+enum mantis_stream_control {
+ STREAM_TO_HIF = 0,
+ STREAM_TO_CAM
+};
+
+extern int mantis_get_mac(struct mantis_pci *mantis);
+extern void mantis_gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value);
+
+extern int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl);
+
+#endif /* __MANTIS_IOC_H */
diff --git a/drivers/media/pci/mantis/mantis_link.h b/drivers/media/pci/mantis/mantis_link.h
new file mode 100644
index 000000000000..2a814774a001
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_link.h
@@ -0,0 +1,83 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_LINK_H
+#define __MANTIS_LINK_H
+
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include "dvb_ca_en50221.h"
+
+enum mantis_sbuf_status {
+ MANTIS_SBUF_DATA_AVAIL = 1,
+ MANTIS_SBUF_DATA_EMPTY = 2,
+ MANTIS_SBUF_DATA_OVFLW = 3
+};
+
+struct mantis_slot {
+ u32 timeout;
+ u32 slave_cfg;
+ u32 bar;
+};
+
+/* Physical layer */
+enum mantis_slot_state {
+ MODULE_INSERTED = 3,
+ MODULE_XTRACTED = 4
+};
+
+struct mantis_ca {
+ struct mantis_slot slot[4];
+
+ struct work_struct hif_evm_work;
+
+ u32 hif_event;
+ wait_queue_head_t hif_opdone_wq;
+ wait_queue_head_t hif_brrdyw_wq;
+ wait_queue_head_t hif_data_wq;
+ wait_queue_head_t hif_write_wq; /* HIF Write op */
+
+ enum mantis_sbuf_status sbuf_status;
+
+ enum mantis_slot_state slot_state;
+
+ void *ca_priv;
+
+ struct dvb_ca_en50221 en50221;
+ struct mutex ca_lock;
+};
+
+/* CA */
+extern void mantis_event_cam_plugin(struct mantis_ca *ca);
+extern void mantis_event_cam_unplug(struct mantis_ca *ca);
+extern int mantis_pcmcia_init(struct mantis_ca *ca);
+extern void mantis_pcmcia_exit(struct mantis_ca *ca);
+extern int mantis_evmgr_init(struct mantis_ca *ca);
+extern void mantis_evmgr_exit(struct mantis_ca *ca);
+
+/* HIF */
+extern int mantis_hif_init(struct mantis_ca *ca);
+extern void mantis_hif_exit(struct mantis_ca *ca);
+extern int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr);
+extern int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data);
+extern int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr);
+extern int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data);
+
+#endif /* __MANTIS_LINK_H */
diff --git a/drivers/media/pci/mantis/mantis_pci.c b/drivers/media/pci/mantis/mantis_pci.c
new file mode 100644
index 000000000000..371558af2d96
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_pci.c
@@ -0,0 +1,170 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <linux/kmod.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_pci.h"
+
+#define DRIVER_NAME "Mantis Core"
+
+int __devinit mantis_pci_init(struct mantis_pci *mantis)
+{
+ u8 latency;
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ struct pci_dev *pdev = mantis->pdev;
+ int err, ret = 0;
+
+ dprintk(MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n",
+ config->model_name,
+ config->dev_type,
+ mantis->pdev->bus->number,
+ PCI_SLOT(mantis->pdev->devfn),
+ PCI_FUNC(mantis->pdev->devfn));
+
+ err = pci_enable_device(pdev);
+ if (err != 0) {
+ ret = -ENODEV;
+ dprintk(MANTIS_ERROR, 1, "ERROR: PCI enable failed <%i>", err);
+ goto fail0;
+ }
+
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err != 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Unable to obtain 32 bit DMA <%i>", err);
+ ret = -ENOMEM;
+ goto fail1;
+ }
+
+ pci_set_master(pdev);
+
+ if (!request_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0),
+ DRIVER_NAME)) {
+
+ dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 Request failed !");
+ ret = -ENODEV;
+ goto fail1;
+ }
+
+ mantis->mmio = ioremap(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+
+ if (!mantis->mmio) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 remap failed !");
+ ret = -ENODEV;
+ goto fail2;
+ }
+
+ pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency);
+ mantis->latency = latency;
+ mantis->revision = pdev->revision;
+
+ dprintk(MANTIS_ERROR, 0, " Mantis Rev %d [%04x:%04x], ",
+ mantis->revision,
+ mantis->pdev->subsystem_vendor,
+ mantis->pdev->subsystem_device);
+
+ dprintk(MANTIS_ERROR, 0,
+ "irq: %d, latency: %d\n memory: 0x%lx, mmio: 0x%p\n",
+ mantis->pdev->irq,
+ mantis->latency,
+ mantis->mantis_addr,
+ mantis->mmio);
+
+ err = request_irq(pdev->irq,
+ config->irq_handler,
+ IRQF_SHARED,
+ DRIVER_NAME,
+ mantis);
+
+ if (err != 0) {
+
+ dprintk(MANTIS_ERROR, 1, "ERROR: IRQ registration failed ! <%d>", err);
+ ret = -ENODEV;
+ goto fail3;
+ }
+
+ pci_set_drvdata(pdev, mantis);
+ return ret;
+
+ /* Error conditions */
+fail3:
+ dprintk(MANTIS_ERROR, 1, "ERROR: <%d> I/O unmap", ret);
+ if (mantis->mmio)
+ iounmap(mantis->mmio);
+
+fail2:
+ dprintk(MANTIS_ERROR, 1, "ERROR: <%d> releasing regions", ret);
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+
+fail1:
+ dprintk(MANTIS_ERROR, 1, "ERROR: <%d> disabling device", ret);
+ pci_disable_device(pdev);
+
+fail0:
+ dprintk(MANTIS_ERROR, 1, "ERROR: <%d> exiting", ret);
+ pci_set_drvdata(pdev, NULL);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(mantis_pci_init);
+
+void mantis_pci_exit(struct mantis_pci *mantis)
+{
+ struct pci_dev *pdev = mantis->pdev;
+
+ dprintk(MANTIS_NOTICE, 1, " mem: 0x%p", mantis->mmio);
+ free_irq(pdev->irq, mantis);
+ if (mantis->mmio) {
+ iounmap(mantis->mmio);
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ }
+
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+}
+EXPORT_SYMBOL_GPL(mantis_pci_exit);
+
+MODULE_DESCRIPTION("Mantis PCI DTV bridge driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/pci/mantis/mantis_pci.h b/drivers/media/pci/mantis/mantis_pci.h
new file mode 100644
index 000000000000..65f004519086
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_pci.h
@@ -0,0 +1,27 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_PCI_H
+#define __MANTIS_PCI_H
+
+extern int mantis_pci_init(struct mantis_pci *mantis);
+extern void mantis_pci_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_PCI_H */
diff --git a/drivers/media/pci/mantis/mantis_pcmcia.c b/drivers/media/pci/mantis/mantis_pcmcia.c
new file mode 100644
index 000000000000..2f188c089666
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_pcmcia.c
@@ -0,0 +1,121 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_link.h" /* temporary due to physical layer stuff */
+#include "mantis_reg.h"
+
+/*
+ * If Slot state is already PLUG_IN event and we are called
+ * again, definitely it is jitter alone
+ */
+void mantis_event_cam_plugin(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ u32 gpif_irqcfg;
+
+ if (ca->slot_state == MODULE_XTRACTED) {
+ dprintk(MANTIS_DEBUG, 1, "Event: CAM Plugged IN: Adapter(%d) Slot(0)", mantis->num);
+ udelay(50);
+ mmwrite(0xda000000, MANTIS_CARD_RESET);
+ gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG);
+ gpif_irqcfg |= MANTIS_MASK_PLUGOUT;
+ gpif_irqcfg &= ~MANTIS_MASK_PLUGIN;
+ mmwrite(gpif_irqcfg, MANTIS_GPIF_IRQCFG);
+ udelay(500);
+ ca->slot_state = MODULE_INSERTED;
+ }
+ udelay(100);
+}
+
+/*
+ * If Slot state is already UN_PLUG event and we are called
+ * again, definitely it is jitter alone
+ */
+void mantis_event_cam_unplug(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ u32 gpif_irqcfg;
+
+ if (ca->slot_state == MODULE_INSERTED) {
+ dprintk(MANTIS_DEBUG, 1, "Event: CAM Unplugged: Adapter(%d) Slot(0)", mantis->num);
+ udelay(50);
+ mmwrite(0x00da0000, MANTIS_CARD_RESET);
+ gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG);
+ gpif_irqcfg |= MANTIS_MASK_PLUGIN;
+ gpif_irqcfg &= ~MANTIS_MASK_PLUGOUT;
+ mmwrite(gpif_irqcfg, MANTIS_GPIF_IRQCFG);
+ udelay(500);
+ ca->slot_state = MODULE_XTRACTED;
+ }
+ udelay(100);
+}
+
+int mantis_pcmcia_init(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ u32 gpif_stat, card_stat;
+
+ mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_IRQ0, MANTIS_INT_MASK);
+ gpif_stat = mmread(MANTIS_GPIF_STATUS);
+ card_stat = mmread(MANTIS_GPIF_IRQCFG);
+
+ if (gpif_stat & MANTIS_GPIF_DETSTAT) {
+ dprintk(MANTIS_DEBUG, 1, "CAM found on Adapter(%d) Slot(0)", mantis->num);
+ mmwrite(card_stat | MANTIS_MASK_PLUGOUT, MANTIS_GPIF_IRQCFG);
+ ca->slot_state = MODULE_INSERTED;
+ dvb_ca_en50221_camchange_irq(&ca->en50221,
+ 0,
+ DVB_CA_EN50221_CAMCHANGE_INSERTED);
+ } else {
+ dprintk(MANTIS_DEBUG, 1, "Empty Slot on Adapter(%d) Slot(0)", mantis->num);
+ mmwrite(card_stat | MANTIS_MASK_PLUGIN, MANTIS_GPIF_IRQCFG);
+ ca->slot_state = MODULE_XTRACTED;
+ dvb_ca_en50221_camchange_irq(&ca->en50221,
+ 0,
+ DVB_CA_EN50221_CAMCHANGE_REMOVED);
+ }
+
+ return 0;
+}
+
+void mantis_pcmcia_exit(struct mantis_ca *ca)
+{
+ struct mantis_pci *mantis = ca->ca_priv;
+
+ mmwrite(mmread(MANTIS_GPIF_STATUS) & (~MANTIS_CARD_PLUGOUT | ~MANTIS_CARD_PLUGIN), MANTIS_GPIF_STATUS);
+ mmwrite(mmread(MANTIS_INT_MASK) & ~MANTIS_INT_IRQ0, MANTIS_INT_MASK);
+}
diff --git a/drivers/media/pci/mantis/mantis_reg.h b/drivers/media/pci/mantis/mantis_reg.h
new file mode 100644
index 000000000000..7761f9dc7fe0
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_reg.h
@@ -0,0 +1,197 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_REG_H
+#define __MANTIS_REG_H
+
+/* Interrupts */
+#define MANTIS_INT_STAT 0x00
+#define MANTIS_INT_MASK 0x04
+
+#define MANTIS_INT_RISCSTAT (0x0f << 28)
+#define MANTIS_INT_RISCEN (0x01 << 27)
+#define MANTIS_INT_I2CRACK (0x01 << 26)
+
+/* #define MANTIS_INT_GPIF (0xff << 12) */
+
+#define MANTIS_INT_PCMCIA7 (0x01 << 19)
+#define MANTIS_INT_PCMCIA6 (0x01 << 18)
+#define MANTIS_INT_PCMCIA5 (0x01 << 17)
+#define MANTIS_INT_PCMCIA4 (0x01 << 16)
+#define MANTIS_INT_PCMCIA3 (0x01 << 15)
+#define MANTIS_INT_PCMCIA2 (0x01 << 14)
+#define MANTIS_INT_PCMCIA1 (0x01 << 13)
+#define MANTIS_INT_PCMCIA0 (0x01 << 12)
+#define MANTIS_INT_IRQ1 (0x01 << 11)
+#define MANTIS_INT_IRQ0 (0x01 << 10)
+#define MANTIS_INT_OCERR (0x01 << 8)
+#define MANTIS_INT_PABORT (0x01 << 7)
+#define MANTIS_INT_RIPERR (0x01 << 6)
+#define MANTIS_INT_PPERR (0x01 << 5)
+#define MANTIS_INT_FTRGT (0x01 << 3)
+#define MANTIS_INT_RISCI (0x01 << 1)
+#define MANTIS_INT_I2CDONE (0x01 << 0)
+
+/* DMA */
+#define MANTIS_DMA_CTL 0x08
+#define MANTIS_GPIF_RD (0xff << 24)
+#define MANTIS_GPIF_WR (0xff << 16)
+#define MANTIS_CPU_DO (0x01 << 10)
+#define MANTIS_DRV_DO (0x01 << 9)
+#define MANTIS_I2C_RD (0x01 << 7)
+#define MANTIS_I2C_WR (0x01 << 6)
+#define MANTIS_DCAP_MODE (0x01 << 5)
+#define MANTIS_FIFO_TP_4 (0x00 << 3)
+#define MANTIS_FIFO_TP_8 (0x01 << 3)
+#define MANTIS_FIFO_TP_16 (0x02 << 3)
+#define MANTIS_FIFO_EN (0x01 << 2)
+#define MANTIS_DCAP_EN (0x01 << 1)
+#define MANTIS_RISC_EN (0x01 << 0)
+
+/* DEBUG */
+#define MANTIS_DEBUGREG 0x0c
+#define MANTIS_DATINV (0x0e << 7)
+#define MANTIS_TOP_DEBUGSEL (0x07 << 4)
+#define MANTIS_PCMCIA_DEBUGSEL (0x0f << 0)
+
+#define MANTIS_RISC_START 0x10
+#define MANTIS_RISC_PC 0x14
+
+/* I2C */
+#define MANTIS_I2CDATA_CTL 0x18
+#define MANTIS_I2C_RATE_1 (0x00 << 6)
+#define MANTIS_I2C_RATE_2 (0x01 << 6)
+#define MANTIS_I2C_RATE_3 (0x02 << 6)
+#define MANTIS_I2C_RATE_4 (0x03 << 6)
+#define MANTIS_I2C_STOP (0x01 << 5)
+#define MANTIS_I2C_PGMODE (0x01 << 3)
+
+/* DATA */
+#define MANTIS_CMD_DATA_R1 0x20
+#define MANTIS_CMD_DATA_3 (0xff << 24)
+#define MANTIS_CMD_DATA_2 (0xff << 16)
+#define MANTIS_CMD_DATA_1 (0xff << 8)
+#define MANTIS_CMD_DATA_0 (0xff << 0)
+
+#define MANTIS_CMD_DATA_R2 0x24
+#define MANTIS_CMD_DATA_7 (0xff << 24)
+#define MANTIS_CMD_DATA_6 (0xff << 16)
+#define MANTIS_CMD_DATA_5 (0xff << 8)
+#define MANTIS_CMD_DATA_4 (0xff << 0)
+
+#define MANTIS_CONTROL 0x28
+#define MANTIS_DET (0x01 << 7)
+#define MANTIS_DAT_CF_EN (0x01 << 6)
+#define MANTIS_ACS (0x03 << 4)
+#define MANTIS_VCCEN (0x01 << 3)
+#define MANTIS_BYPASS (0x01 << 2)
+#define MANTIS_MRST (0x01 << 1)
+#define MANTIS_CRST_INT (0x01 << 0)
+
+#define MANTIS_GPIF_CFGSLA 0x84
+#define MANTIS_GPIF_WAITSMPL (0x07 << 28)
+#define MANTIS_GPIF_BYTEADDRSUB (0x01 << 25)
+#define MANTIS_GPIF_WAITPOL (0x01 << 24)
+#define MANTIS_GPIF_NCDELAY (0x07 << 20)
+#define MANTIS_GPIF_RW2CSDELAY (0x07 << 16)
+#define MANTIS_GPIF_SLFTIMEDMODE (0x01 << 15)
+#define MANTIS_GPIF_SLFTIMEDDELY (0x7f << 8)
+#define MANTIS_GPIF_DEVTYPE (0x07 << 4)
+#define MANTIS_GPIF_BIGENDIAN (0x01 << 3)
+#define MANTIS_GPIF_FETCHCMD (0x03 << 1)
+#define MANTIS_GPIF_HWORDDEV (0x01 << 0)
+
+#define MANTIS_GPIF_WSTOPER 0x90
+#define MANTIS_GPIF_WSTOPERWREN3 (0x01 << 31)
+#define MANTIS_GPIF_PARBOOTN (0x01 << 29)
+#define MANTIS_GPIF_WSTOPERSLID3 (0x1f << 24)
+#define MANTIS_GPIF_WSTOPERWREN2 (0x01 << 23)
+#define MANTIS_GPIF_WSTOPERSLID2 (0x1f << 16)
+#define MANTIS_GPIF_WSTOPERWREN1 (0x01 << 15)
+#define MANTIS_GPIF_WSTOPERSLID1 (0x1f << 8)
+#define MANTIS_GPIF_WSTOPERWREN0 (0x01 << 7)
+#define MANTIS_GPIF_WSTOPERSLID0 (0x1f << 0)
+
+#define MANTIS_GPIF_CS2RW 0x94
+#define MANTIS_GPIF_CS2RWWREN3 (0x01 << 31)
+#define MANTIS_GPIF_CS2RWDELY3 (0x3f << 24)
+#define MANTIS_GPIF_CS2RWWREN2 (0x01 << 23)
+#define MANTIS_GPIF_CS2RWDELY2 (0x3f << 16)
+#define MANTIS_GPIF_CS2RWWREN1 (0x01 << 15)
+#define MANTIS_GPIF_CS2RWDELY1 (0x3f << 8)
+#define MANTIS_GPIF_CS2RWWREN0 (0x01 << 7)
+#define MANTIS_GPIF_CS2RWDELY0 (0x3f << 0)
+
+#define MANTIS_GPIF_IRQCFG 0x98
+#define MANTIS_GPIF_IRQPOL (0x01 << 8)
+#define MANTIS_MASK_WRACK (0x01 << 7)
+#define MANTIS_MASK_BRRDY (0x01 << 6)
+#define MANTIS_MASK_OVFLW (0x01 << 5)
+#define MANTIS_MASK_OTHERR (0x01 << 4)
+#define MANTIS_MASK_WSTO (0x01 << 3)
+#define MANTIS_MASK_EXTIRQ (0x01 << 2)
+#define MANTIS_MASK_PLUGIN (0x01 << 1)
+#define MANTIS_MASK_PLUGOUT (0x01 << 0)
+
+#define MANTIS_GPIF_STATUS 0x9c
+#define MANTIS_SBUF_KILLOP (0x01 << 15)
+#define MANTIS_SBUF_OPDONE (0x01 << 14)
+#define MANTIS_SBUF_EMPTY (0x01 << 13)
+#define MANTIS_GPIF_DETSTAT (0x01 << 9)
+#define MANTIS_GPIF_INTSTAT (0x01 << 8)
+#define MANTIS_GPIF_WRACK (0x01 << 7)
+#define MANTIS_GPIF_BRRDY (0x01 << 6)
+#define MANTIS_SBUF_OVFLW (0x01 << 5)
+#define MANTIS_GPIF_OTHERR (0x01 << 4)
+#define MANTIS_SBUF_WSTO (0x01 << 3)
+#define MANTIS_GPIF_EXTIRQ (0x01 << 2)
+#define MANTIS_CARD_PLUGIN (0x01 << 1)
+#define MANTIS_CARD_PLUGOUT (0x01 << 0)
+
+#define MANTIS_GPIF_BRADDR 0xa0
+#define MANTIS_GPIF_PCMCIAREG (0x01 << 27)
+#define MANTIS_GPIF_PCMCIAIOM (0x01 << 26)
+#define MANTIS_GPIF_BR_ADDR (0xfffffff << 0)
+
+#define MANTIS_GPIF_BRBYTES 0xa4
+#define MANTIS_GPIF_BRCNT (0xfff << 0)
+
+#define MANTIS_PCMCIA_RESET 0xa8
+#define MANTIS_PCMCIA_RSTVAL (0xff << 0)
+
+#define MANTIS_CARD_RESET 0xac
+
+#define MANTIS_GPIF_ADDR 0xb0
+#define MANTIS_GPIF_HIFRDWRN (0x01 << 31)
+#define MANTIS_GPIF_PCMCIAREG (0x01 << 27)
+#define MANTIS_GPIF_PCMCIAIOM (0x01 << 26)
+#define MANTIS_GPIF_HIFADDR (0xfffffff << 0)
+
+#define MANTIS_GPIF_DOUT 0xb4
+#define MANTIS_GPIF_HIFDOUT (0xfffffff << 0)
+
+#define MANTIS_GPIF_DIN 0xb8
+#define MANTIS_GPIF_HIFDIN (0xfffffff << 0)
+
+#define MANTIS_GPIF_SPARE 0xbc
+#define MANTIS_GPIF_LOGICRD (0xffff << 16)
+#define MANTIS_GPIF_LOGICRW (0xffff << 0)
+
+#endif /* __MANTIS_REG_H */
diff --git a/drivers/media/pci/mantis/mantis_uart.c b/drivers/media/pci/mantis/mantis_uart.c
new file mode 100644
index 000000000000..18340dafa426
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_uart.c
@@ -0,0 +1,188 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_uart.h"
+
+struct mantis_uart_params {
+ enum mantis_baud baud_rate;
+ enum mantis_parity parity;
+};
+
+static struct {
+ char string[7];
+} rates[5] = {
+ { "9600" },
+ { "19200" },
+ { "38400" },
+ { "57600" },
+ { "115200" }
+};
+
+static struct {
+ char string[5];
+} parity[3] = {
+ { "NONE" },
+ { "ODD" },
+ { "EVEN" }
+};
+
+#define UART_MAX_BUF 16
+
+int mantis_uart_read(struct mantis_pci *mantis, u8 *data)
+{
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ u32 stat = 0, i;
+
+ /* get data */
+ for (i = 0; i < (config->bytes + 1); i++) {
+
+ stat = mmread(MANTIS_UART_STAT);
+
+ if (stat & MANTIS_UART_RXFIFO_FULL) {
+ dprintk(MANTIS_ERROR, 1, "RX Fifo FULL");
+ }
+ data[i] = mmread(MANTIS_UART_RXD) & 0x3f;
+
+ dprintk(MANTIS_DEBUG, 1, "Reading ... <%02x>", data[i] & 0x3f);
+
+ if (data[i] & (1 << 7)) {
+ dprintk(MANTIS_ERROR, 1, "UART framing error");
+ return -EINVAL;
+ }
+ if (data[i] & (1 << 6)) {
+ dprintk(MANTIS_ERROR, 1, "UART parity error");
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static void mantis_uart_work(struct work_struct *work)
+{
+ struct mantis_pci *mantis = container_of(work, struct mantis_pci, uart_work);
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ u8 buf[16];
+ int i;
+
+ mantis_uart_read(mantis, buf);
+
+ for (i = 0; i < (config->bytes + 1); i++)
+ dprintk(MANTIS_INFO, 1, "UART BUF:%d <%02x> ", i, buf[i]);
+
+ dprintk(MANTIS_DEBUG, 0, "\n");
+}
+
+static int mantis_uart_setup(struct mantis_pci *mantis,
+ struct mantis_uart_params *params)
+{
+ u32 reg;
+
+ mmwrite((mmread(MANTIS_UART_CTL) | (params->parity & 0x3)), MANTIS_UART_CTL);
+
+ reg = mmread(MANTIS_UART_BAUD);
+
+ switch (params->baud_rate) {
+ case MANTIS_BAUD_9600:
+ reg |= 0xd8;
+ break;
+ case MANTIS_BAUD_19200:
+ reg |= 0x6c;
+ break;
+ case MANTIS_BAUD_38400:
+ reg |= 0x36;
+ break;
+ case MANTIS_BAUD_57600:
+ reg |= 0x23;
+ break;
+ case MANTIS_BAUD_115200:
+ reg |= 0x11;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ mmwrite(reg, MANTIS_UART_BAUD);
+
+ return 0;
+}
+
+int mantis_uart_init(struct mantis_pci *mantis)
+{
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ struct mantis_uart_params params;
+
+ /* default parity: */
+ params.baud_rate = config->baud_rate;
+ params.parity = config->parity;
+ dprintk(MANTIS_INFO, 1, "Initializing UART @ %sbps parity:%s",
+ rates[params.baud_rate].string,
+ parity[params.parity].string);
+
+ init_waitqueue_head(&mantis->uart_wq);
+ spin_lock_init(&mantis->uart_lock);
+
+ INIT_WORK(&mantis->uart_work, mantis_uart_work);
+
+ /* disable interrupt */
+ mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
+
+ mantis_uart_setup(mantis, &params);
+
+ /* default 1 byte */
+ mmwrite((mmread(MANTIS_UART_BAUD) | (config->bytes << 8)), MANTIS_UART_BAUD);
+
+ /* flush buffer */
+ mmwrite((mmread(MANTIS_UART_CTL) | MANTIS_UART_RXFLUSH), MANTIS_UART_CTL);
+
+ /* enable interrupt */
+ mmwrite(mmread(MANTIS_INT_MASK) | 0x800, MANTIS_INT_MASK);
+ mmwrite(mmread(MANTIS_UART_CTL) | MANTIS_UART_RXINT, MANTIS_UART_CTL);
+
+ schedule_work(&mantis->uart_work);
+ dprintk(MANTIS_DEBUG, 1, "UART successfully initialized");
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_uart_init);
+
+void mantis_uart_exit(struct mantis_pci *mantis)
+{
+ /* disable interrupt */
+ mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
+ flush_work_sync(&mantis->uart_work);
+}
+EXPORT_SYMBOL_GPL(mantis_uart_exit);
diff --git a/drivers/media/pci/mantis/mantis_uart.h b/drivers/media/pci/mantis/mantis_uart.h
new file mode 100644
index 000000000000..ffb62a0a5a13
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_uart.h
@@ -0,0 +1,58 @@
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_UART_H
+#define __MANTIS_UART_H
+
+#define MANTIS_UART_CTL 0xe0
+#define MANTIS_UART_RXINT (1 << 4)
+#define MANTIS_UART_RXFLUSH (1 << 2)
+
+#define MANTIS_UART_RXD 0xe8
+#define MANTIS_UART_BAUD 0xec
+
+#define MANTIS_UART_STAT 0xf0
+#define MANTIS_UART_RXFIFO_DATA (1 << 7)
+#define MANTIS_UART_RXFIFO_EMPTY (1 << 6)
+#define MANTIS_UART_RXFIFO_FULL (1 << 3)
+#define MANTIS_UART_FRAME_ERR (1 << 2)
+#define MANTIS_UART_PARITY_ERR (1 << 1)
+#define MANTIS_UART_RXTHRESH_INT (1 << 0)
+
+enum mantis_baud {
+ MANTIS_BAUD_9600 = 0,
+ MANTIS_BAUD_19200,
+ MANTIS_BAUD_38400,
+ MANTIS_BAUD_57600,
+ MANTIS_BAUD_115200
+};
+
+enum mantis_parity {
+ MANTIS_PARITY_NONE = 0,
+ MANTIS_PARITY_EVEN,
+ MANTIS_PARITY_ODD,
+};
+
+struct mantis_pci;
+
+extern int mantis_uart_init(struct mantis_pci *mantis);
+extern void mantis_uart_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_UART_H */
diff --git a/drivers/media/pci/mantis/mantis_vp1033.c b/drivers/media/pci/mantis/mantis_vp1033.c
new file mode 100644
index 000000000000..ad013e93ed11
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_vp1033.c
@@ -0,0 +1,212 @@
+/*
+ Mantis VP-1033 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "stv0299.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp1033.h"
+#include "mantis_reg.h"
+
+u8 lgtdqcs001f_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x30,
+ 0x03, 0x00,
+ 0x04, 0x2a,
+ 0x05, 0x85,
+ 0x06, 0x02,
+ 0x07, 0x00,
+ 0x08, 0x00,
+ 0x0c, 0x01,
+ 0x0d, 0x81,
+ 0x0e, 0x44,
+ 0x0f, 0x94,
+ 0x10, 0x3c,
+ 0x11, 0x84,
+ 0x12, 0xb9,
+ 0x13, 0xb5,
+ 0x14, 0x4f,
+ 0x15, 0xc9,
+ 0x16, 0x80,
+ 0x17, 0x36,
+ 0x18, 0xfb,
+ 0x19, 0xcf,
+ 0x1a, 0xbc,
+ 0x1c, 0x2b,
+ 0x1d, 0x27,
+ 0x1e, 0x00,
+ 0x1f, 0x0b,
+ 0x20, 0xa1,
+ 0x21, 0x60,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x28, 0x00,
+ 0x29, 0x28,
+ 0x2a, 0x14,
+ 0x2b, 0x0f,
+ 0x2c, 0x09,
+ 0x2d, 0x05,
+ 0x31, 0x1f,
+ 0x32, 0x19,
+ 0x33, 0xfc,
+ 0x34, 0x13,
+ 0xff, 0xff,
+};
+
+#define MANTIS_MODEL_NAME "VP-1033"
+#define MANTIS_DEV_TYPE "DVB-S/DSS"
+
+int lgtdqcs001f_tuner_set(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ struct mantis_pci *mantis = fe->dvb->priv;
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ u8 buf[4];
+ u32 div;
+
+
+ struct i2c_msg msg = {.addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf)};
+
+ div = p->frequency / 250;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = 0x83;
+ buf[3] = 0xc0;
+
+ if (p->frequency < 1531000)
+ buf[3] |= 0x04;
+ else
+ buf[3] &= ~0x04;
+ if (i2c_transfer(adapter, &msg, 1) < 0) {
+ dprintk(MANTIS_ERROR, 1, "Write: I2C Transfer failed");
+ return -EIO;
+ }
+ msleep_interruptible(100);
+
+ return 0;
+}
+
+int lgtdqcs001f_set_symbol_rate(struct dvb_frontend *fe,
+ u32 srate, u32 ratio)
+{
+ u8 aclk = 0;
+ u8 bclk = 0;
+
+ if (srate < 1500000) {
+ aclk = 0xb7;
+ bclk = 0x47;
+ } else if (srate < 3000000) {
+ aclk = 0xb7;
+ bclk = 0x4b;
+ } else if (srate < 7000000) {
+ aclk = 0xb7;
+ bclk = 0x4f;
+ } else if (srate < 14000000) {
+ aclk = 0xb7;
+ bclk = 0x53;
+ } else if (srate < 30000000) {
+ aclk = 0xb6;
+ bclk = 0x53;
+ } else if (srate < 45000000) {
+ aclk = 0xb4;
+ bclk = 0x51;
+ }
+ stv0299_writereg(fe, 0x13, aclk);
+ stv0299_writereg(fe, 0x14, bclk);
+
+ stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+ stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+ stv0299_writereg(fe, 0x21, ratio & 0xf0);
+
+ return 0;
+}
+
+struct stv0299_config lgtdqcs001f_config = {
+ .demod_address = 0x68,
+ .inittab = lgtdqcs001f_inittab,
+ .mclk = 88000000UL,
+ .invert = 0,
+ .skip_reinit = 0,
+ .volt13_op0_op1 = STV0299_VOLT13_OP0,
+ .min_delay_ms = 100,
+ .set_symbol_rate = lgtdqcs001f_set_symbol_rate,
+};
+
+static int vp1033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ int err = 0;
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ mantis_frontend_soft_reset(mantis);
+ msleep(250);
+
+ dprintk(MANTIS_ERROR, 1, "Probing for STV0299 (DVB-S)");
+ fe = dvb_attach(stv0299_attach, &lgtdqcs001f_config, adapter);
+
+ if (fe) {
+ fe->ops.tuner_ops.set_params = lgtdqcs001f_tuner_set;
+ dprintk(MANTIS_ERROR, 1, "found STV0299 DVB-S frontend @ 0x%02x",
+ lgtdqcs001f_config.demod_address);
+
+ dprintk(MANTIS_ERROR, 1, "Mantis DVB-S STV0299 frontend attach success");
+ } else {
+ return -1;
+ }
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+ mantis->fe = fe;
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp1033_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_204,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp1033_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+};
diff --git a/drivers/media/pci/mantis/mantis_vp1033.h b/drivers/media/pci/mantis/mantis_vp1033.h
new file mode 100644
index 000000000000..7daaa1bf127d
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_vp1033.h
@@ -0,0 +1,30 @@
+/*
+ Mantis VP-1033 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP1033_H
+#define __MANTIS_VP1033_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_1033_DVB_S 0x0016
+
+extern struct mantis_hwconfig vp1033_config;
+
+#endif /* __MANTIS_VP1033_H */
diff --git a/drivers/media/pci/mantis/mantis_vp1034.c b/drivers/media/pci/mantis/mantis_vp1034.c
new file mode 100644
index 000000000000..430ae84ce528
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_vp1034.c
@@ -0,0 +1,120 @@
+/*
+ Mantis VP-1034 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mb86a16.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp1034.h"
+#include "mantis_reg.h"
+
+struct mb86a16_config vp1034_mb86a16_config = {
+ .demod_address = 0x08,
+ .set_voltage = vp1034_set_voltage,
+};
+
+#define MANTIS_MODEL_NAME "VP-1034"
+#define MANTIS_DEV_TYPE "DVB-S/DSS"
+
+int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+ struct mantis_pci *mantis = fe->dvb->priv;
+
+ switch (voltage) {
+ case SEC_VOLTAGE_13:
+ dprintk(MANTIS_ERROR, 1, "Polarization=[13V]");
+ mantis_gpio_set_bits(mantis, 13, 1);
+ mantis_gpio_set_bits(mantis, 14, 0);
+ break;
+ case SEC_VOLTAGE_18:
+ dprintk(MANTIS_ERROR, 1, "Polarization=[18V]");
+ mantis_gpio_set_bits(mantis, 13, 1);
+ mantis_gpio_set_bits(mantis, 14, 1);
+ break;
+ case SEC_VOLTAGE_OFF:
+ dprintk(MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN");
+ break;
+ default:
+ dprintk(MANTIS_ERROR, 1, "Invalid = (%d)", (u32) voltage);
+ return -EINVAL;
+ }
+ mmwrite(0x00, MANTIS_GPIF_DOUT);
+
+ return 0;
+}
+
+static int vp1034_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ int err = 0;
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ mantis_frontend_soft_reset(mantis);
+ msleep(250);
+
+ dprintk(MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)");
+ fe = dvb_attach(mb86a16_attach, &vp1034_mb86a16_config, adapter);
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found MB86A16 DVB-S/DSS frontend @0x%02x",
+ vp1034_mb86a16_config.demod_address);
+
+ } else {
+ return -1;
+ }
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+ mantis->fe = fe;
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp1034_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_204,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp1034_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+};
diff --git a/drivers/media/pci/mantis/mantis_vp1034.h b/drivers/media/pci/mantis/mantis_vp1034.h
new file mode 100644
index 000000000000..323f38ef8e3d
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_vp1034.h
@@ -0,0 +1,33 @@
+/*
+ Mantis VP-1034 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP1034_H
+#define __MANTIS_VP1034_H
+
+#include "dvb_frontend.h"
+#include "mantis_common.h"
+
+
+#define MANTIS_VP_1034_DVB_S 0x0014
+
+extern struct mantis_hwconfig vp1034_config;
+extern int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage);
+
+#endif /* __MANTIS_VP1034_H */
diff --git a/drivers/media/pci/mantis/mantis_vp1041.c b/drivers/media/pci/mantis/mantis_vp1041.c
new file mode 100644
index 000000000000..07aa887a4b4a
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_vp1041.c
@@ -0,0 +1,357 @@
+/*
+ Mantis VP-1041 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp1041.h"
+#include "stb0899_reg.h"
+#include "stb0899_drv.h"
+#include "stb0899_cfg.h"
+#include "stb6100_cfg.h"
+#include "stb6100.h"
+#include "lnbp21.h"
+
+#define MANTIS_MODEL_NAME "VP-1041"
+#define MANTIS_DEV_TYPE "DSS/DVB-S/DVB-S2"
+
+static const struct stb0899_s1_reg vp1041_stb0899_s1_init_1[] = {
+
+ /* 0x0000000b, *//* SYSREG */
+ { STB0899_DEV_ID , 0x30 },
+ { STB0899_DISCNTRL1 , 0x32 },
+ { STB0899_DISCNTRL2 , 0x80 },
+ { STB0899_DISRX_ST0 , 0x04 },
+ { STB0899_DISRX_ST1 , 0x00 },
+ { STB0899_DISPARITY , 0x00 },
+ { STB0899_DISSTATUS , 0x20 },
+ { STB0899_DISF22 , 0x99 },
+ { STB0899_DISF22RX , 0xa8 },
+ /* SYSREG ? */
+ { STB0899_ACRPRESC , 0x11 },
+ { STB0899_ACRDIV1 , 0x0a },
+ { STB0899_ACRDIV2 , 0x05 },
+ { STB0899_DACR1 , 0x00 },
+ { STB0899_DACR2 , 0x00 },
+ { STB0899_OUTCFG , 0x00 },
+ { STB0899_MODECFG , 0x00 },
+ { STB0899_IRQSTATUS_3 , 0xfe },
+ { STB0899_IRQSTATUS_2 , 0x03 },
+ { STB0899_IRQSTATUS_1 , 0x7c },
+ { STB0899_IRQSTATUS_0 , 0xf4 },
+ { STB0899_IRQMSK_3 , 0xf3 },
+ { STB0899_IRQMSK_2 , 0xfc },
+ { STB0899_IRQMSK_1 , 0xff },
+ { STB0899_IRQMSK_0 , 0xff },
+ { STB0899_IRQCFG , 0x00 },
+ { STB0899_I2CCFG , 0x88 },
+ { STB0899_I2CRPT , 0x58 },
+ { STB0899_IOPVALUE5 , 0x00 },
+ { STB0899_IOPVALUE4 , 0x33 },
+ { STB0899_IOPVALUE3 , 0x6d },
+ { STB0899_IOPVALUE2 , 0x90 },
+ { STB0899_IOPVALUE1 , 0x60 },
+ { STB0899_IOPVALUE0 , 0x00 },
+ { STB0899_GPIO00CFG , 0x82 },
+ { STB0899_GPIO01CFG , 0x82 },
+ { STB0899_GPIO02CFG , 0x82 },
+ { STB0899_GPIO03CFG , 0x82 },
+ { STB0899_GPIO04CFG , 0x82 },
+ { STB0899_GPIO05CFG , 0x82 },
+ { STB0899_GPIO06CFG , 0x82 },
+ { STB0899_GPIO07CFG , 0x82 },
+ { STB0899_GPIO08CFG , 0x82 },
+ { STB0899_GPIO09CFG , 0x82 },
+ { STB0899_GPIO10CFG , 0x82 },
+ { STB0899_GPIO11CFG , 0x82 },
+ { STB0899_GPIO12CFG , 0x82 },
+ { STB0899_GPIO13CFG , 0x82 },
+ { STB0899_GPIO14CFG , 0x82 },
+ { STB0899_GPIO15CFG , 0x82 },
+ { STB0899_GPIO16CFG , 0x82 },
+ { STB0899_GPIO17CFG , 0x82 },
+ { STB0899_GPIO18CFG , 0x82 },
+ { STB0899_GPIO19CFG , 0x82 },
+ { STB0899_GPIO20CFG , 0x82 },
+ { STB0899_SDATCFG , 0xb8 },
+ { STB0899_SCLTCFG , 0xba },
+ { STB0899_AGCRFCFG , 0x1c }, /* 0x11 */
+ { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */
+ { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */
+ { STB0899_DIRCLKCFG , 0x82 },
+ { STB0899_CLKOUT27CFG , 0x7e },
+ { STB0899_STDBYCFG , 0x82 },
+ { STB0899_CS0CFG , 0x82 },
+ { STB0899_CS1CFG , 0x82 },
+ { STB0899_DISEQCOCFG , 0x20 },
+ { STB0899_GPIO32CFG , 0x82 },
+ { STB0899_GPIO33CFG , 0x82 },
+ { STB0899_GPIO34CFG , 0x82 },
+ { STB0899_GPIO35CFG , 0x82 },
+ { STB0899_GPIO36CFG , 0x82 },
+ { STB0899_GPIO37CFG , 0x82 },
+ { STB0899_GPIO38CFG , 0x82 },
+ { STB0899_GPIO39CFG , 0x82 },
+ { STB0899_NCOARSE , 0x17 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */
+ { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */
+ { STB0899_FILTCTRL , 0x00 },
+ { STB0899_SYSCTRL , 0x01 },
+ { STB0899_STOPCLK1 , 0x20 },
+ { STB0899_STOPCLK2 , 0x00 },
+ { STB0899_INTBUFSTATUS , 0x00 },
+ { STB0899_INTBUFCTRL , 0x0a },
+ { 0xffff , 0xff },
+};
+
+static const struct stb0899_s1_reg vp1041_stb0899_s1_init_3[] = {
+ { STB0899_DEMOD , 0x00 },
+ { STB0899_RCOMPC , 0xc9 },
+ { STB0899_AGC1CN , 0x01 },
+ { STB0899_AGC1REF , 0x10 },
+ { STB0899_RTC , 0x23 },
+ { STB0899_TMGCFG , 0x4e },
+ { STB0899_AGC2REF , 0x34 },
+ { STB0899_TLSR , 0x84 },
+ { STB0899_CFD , 0xf7 },
+ { STB0899_ACLC , 0x87 },
+ { STB0899_BCLC , 0x94 },
+ { STB0899_EQON , 0x41 },
+ { STB0899_LDT , 0xf1 },
+ { STB0899_LDT2 , 0xe3 },
+ { STB0899_EQUALREF , 0xb4 },
+ { STB0899_TMGRAMP , 0x10 },
+ { STB0899_TMGTHD , 0x30 },
+ { STB0899_IDCCOMP , 0xfd },
+ { STB0899_QDCCOMP , 0xff },
+ { STB0899_POWERI , 0x0c },
+ { STB0899_POWERQ , 0x0f },
+ { STB0899_RCOMP , 0x6c },
+ { STB0899_AGCIQIN , 0x80 },
+ { STB0899_AGC2I1 , 0x06 },
+ { STB0899_AGC2I2 , 0x00 },
+ { STB0899_TLIR , 0x30 },
+ { STB0899_RTF , 0x7f },
+ { STB0899_DSTATUS , 0x00 },
+ { STB0899_LDI , 0xbc },
+ { STB0899_CFRM , 0xea },
+ { STB0899_CFRL , 0x31 },
+ { STB0899_NIRM , 0x2b },
+ { STB0899_NIRL , 0x80 },
+ { STB0899_ISYMB , 0x1d },
+ { STB0899_QSYMB , 0xa6 },
+ { STB0899_SFRH , 0x2f },
+ { STB0899_SFRM , 0x68 },
+ { STB0899_SFRL , 0x40 },
+ { STB0899_SFRUPH , 0x2f },
+ { STB0899_SFRUPM , 0x68 },
+ { STB0899_SFRUPL , 0x40 },
+ { STB0899_EQUAI1 , 0x02 },
+ { STB0899_EQUAQ1 , 0xff },
+ { STB0899_EQUAI2 , 0x04 },
+ { STB0899_EQUAQ2 , 0x05 },
+ { STB0899_EQUAI3 , 0x02 },
+ { STB0899_EQUAQ3 , 0xfd },
+ { STB0899_EQUAI4 , 0x03 },
+ { STB0899_EQUAQ4 , 0x07 },
+ { STB0899_EQUAI5 , 0x08 },
+ { STB0899_EQUAQ5 , 0xf5 },
+ { STB0899_DSTATUS2 , 0x00 },
+ { STB0899_VSTATUS , 0x00 },
+ { STB0899_VERROR , 0x86 },
+ { STB0899_IQSWAP , 0x2a },
+ { STB0899_ECNT1M , 0x00 },
+ { STB0899_ECNT1L , 0x00 },
+ { STB0899_ECNT2M , 0x00 },
+ { STB0899_ECNT2L , 0x00 },
+ { STB0899_ECNT3M , 0x0a },
+ { STB0899_ECNT3L , 0xad },
+ { STB0899_FECAUTO1 , 0x06 },
+ { STB0899_FECM , 0x01 },
+ { STB0899_VTH12 , 0xb0 },
+ { STB0899_VTH23 , 0x7a },
+ { STB0899_VTH34 , 0x58 },
+ { STB0899_VTH56 , 0x38 },
+ { STB0899_VTH67 , 0x34 },
+ { STB0899_VTH78 , 0x24 },
+ { STB0899_PRVIT , 0xff },
+ { STB0899_VITSYNC , 0x19 },
+ { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */
+ { STB0899_TSULC , 0x42 },
+ { STB0899_RSLLC , 0x41 },
+ { STB0899_TSLPL , 0x12 },
+ { STB0899_TSCFGH , 0x0c },
+ { STB0899_TSCFGM , 0x00 },
+ { STB0899_TSCFGL , 0x00 },
+ { STB0899_TSOUT , 0x69 }, /* 0x0d for CAM */
+ { STB0899_RSSYNCDEL , 0x00 },
+ { STB0899_TSINHDELH , 0x02 },
+ { STB0899_TSINHDELM , 0x00 },
+ { STB0899_TSINHDELL , 0x00 },
+ { STB0899_TSLLSTKM , 0x1b },
+ { STB0899_TSLLSTKL , 0xb3 },
+ { STB0899_TSULSTKM , 0x00 },
+ { STB0899_TSULSTKL , 0x00 },
+ { STB0899_PCKLENUL , 0xbc },
+ { STB0899_PCKLENLL , 0xcc },
+ { STB0899_RSPCKLEN , 0xbd },
+ { STB0899_TSSTATUS , 0x90 },
+ { STB0899_ERRCTRL1 , 0xb6 },
+ { STB0899_ERRCTRL2 , 0x95 },
+ { STB0899_ERRCTRL3 , 0x8d },
+ { STB0899_DMONMSK1 , 0x27 },
+ { STB0899_DMONMSK0 , 0x03 },
+ { STB0899_DEMAPVIT , 0x5c },
+ { STB0899_PLPARM , 0x19 },
+ { STB0899_PDELCTRL , 0x48 },
+ { STB0899_PDELCTRL2 , 0x00 },
+ { STB0899_BBHCTRL1 , 0x00 },
+ { STB0899_BBHCTRL2 , 0x00 },
+ { STB0899_HYSTTHRESH , 0x77 },
+ { STB0899_MATCSTM , 0x00 },
+ { STB0899_MATCSTL , 0x00 },
+ { STB0899_UPLCSTM , 0x00 },
+ { STB0899_UPLCSTL , 0x00 },
+ { STB0899_DFLCSTM , 0x00 },
+ { STB0899_DFLCSTL , 0x00 },
+ { STB0899_SYNCCST , 0x00 },
+ { STB0899_SYNCDCSTM , 0x00 },
+ { STB0899_SYNCDCSTL , 0x00 },
+ { STB0899_ISI_ENTRY , 0x00 },
+ { STB0899_ISI_BIT_EN , 0x00 },
+ { STB0899_MATSTRM , 0xf0 },
+ { STB0899_MATSTRL , 0x02 },
+ { STB0899_UPLSTRM , 0x45 },
+ { STB0899_UPLSTRL , 0x60 },
+ { STB0899_DFLSTRM , 0xe3 },
+ { STB0899_DFLSTRL , 0x00 },
+ { STB0899_SYNCSTR , 0x47 },
+ { STB0899_SYNCDSTRM , 0x05 },
+ { STB0899_SYNCDSTRL , 0x18 },
+ { STB0899_CFGPDELSTATUS1 , 0x19 },
+ { STB0899_CFGPDELSTATUS2 , 0x2b },
+ { STB0899_BBFERRORM , 0x00 },
+ { STB0899_BBFERRORL , 0x01 },
+ { STB0899_UPKTERRORM , 0x00 },
+ { STB0899_UPKTERRORL , 0x00 },
+ { 0xffff , 0xff },
+};
+
+struct stb0899_config vp1041_stb0899_config = {
+ .init_dev = vp1041_stb0899_s1_init_1,
+ .init_s2_demod = stb0899_s2_init_2,
+ .init_s1_demod = vp1041_stb0899_s1_init_3,
+ .init_s2_fec = stb0899_s2_init_4,
+ .init_tst = stb0899_s1_init_5,
+
+ .demod_address = 0x68, /* 0xd0 >> 1 */
+
+ .xtal_freq = 27000000,
+ .inversion = IQ_SWAP_ON, /* 1 */
+
+ .lo_clk = 76500000,
+ .hi_clk = 99000000,
+
+ .esno_ave = STB0899_DVBS2_ESNO_AVE,
+ .esno_quant = STB0899_DVBS2_ESNO_QUANT,
+ .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE,
+ .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE,
+ .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD,
+ .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ,
+ .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK,
+ .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF,
+ .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT,
+
+ .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS,
+ .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET,
+ .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS,
+ .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER,
+
+ .tuner_get_frequency = stb6100_get_frequency,
+ .tuner_set_frequency = stb6100_set_frequency,
+ .tuner_set_bandwidth = stb6100_set_bandwidth,
+ .tuner_get_bandwidth = stb6100_get_bandwidth,
+ .tuner_set_rfsiggain = NULL,
+};
+
+struct stb6100_config vp1041_stb6100_config = {
+ .tuner_address = 0x60,
+ .refclock = 27000000,
+};
+
+static int vp1041_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ int err = 0;
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ mantis_frontend_soft_reset(mantis);
+ msleep(250);
+ mantis->fe = dvb_attach(stb0899_attach, &vp1041_stb0899_config, adapter);
+ if (mantis->fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found STB0899 DVB-S/DVB-S2 frontend @0x%02x",
+ vp1041_stb0899_config.demod_address);
+
+ if (dvb_attach(stb6100_attach, mantis->fe, &vp1041_stb6100_config, adapter)) {
+ if (!dvb_attach(lnbp21_attach, mantis->fe, adapter, 0, 0))
+ dprintk(MANTIS_ERROR, 1, "No LNBP21 found!");
+ }
+ } else {
+ return -EREMOTEIO;
+ }
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+
+
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp1041_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_188,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp1041_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+};
diff --git a/drivers/media/pci/mantis/mantis_vp1041.h b/drivers/media/pci/mantis/mantis_vp1041.h
new file mode 100644
index 000000000000..1ae5b3de8081
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_vp1041.h
@@ -0,0 +1,33 @@
+/*
+ Mantis VP-1041 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP1041_H
+#define __MANTIS_VP1041_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_1041_DVB_S2 0x0031
+#define SKYSTAR_HD2_10 0x0001
+#define SKYSTAR_HD2_20 0x0003
+#define CINERGY_S2_PCI_HD 0x1179
+
+extern struct mantis_hwconfig vp1041_config;
+
+#endif /* __MANTIS_VP1041_H */
diff --git a/drivers/media/pci/mantis/mantis_vp2033.c b/drivers/media/pci/mantis/mantis_vp2033.c
new file mode 100644
index 000000000000..1ca6837fbe46
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_vp2033.c
@@ -0,0 +1,188 @@
+/*
+ Mantis VP-2033 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "tda1002x.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp2033.h"
+
+#define MANTIS_MODEL_NAME "VP-2033"
+#define MANTIS_DEV_TYPE "DVB-C"
+
+struct tda1002x_config vp2033_tda1002x_cu1216_config = {
+ .demod_address = 0x18 >> 1,
+ .invert = 1,
+};
+
+struct tda10023_config vp2033_tda10023_cu1216_config = {
+ .demod_address = 0x18 >> 1,
+ .invert = 1,
+};
+
+static u8 read_pwm(struct mantis_pci *mantis)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ u8 b = 0xff;
+ u8 pwm;
+ struct i2c_msg msg[] = {
+ {.addr = 0x50, .flags = 0, .buf = &b, .len = 1},
+ {.addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1}
+ };
+
+ if ((i2c_transfer(adapter, msg, 2) != 2)
+ || (pwm == 0xff))
+ pwm = 0x48;
+
+ return pwm;
+}
+
+static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ struct mantis_pci *mantis = fe->dvb->priv;
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ u8 buf[6];
+ struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf)};
+ int i;
+
+#define CU1216_IF 36125000
+#define TUNER_MUL 62500
+
+ u32 div = (p->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = 0xce;
+ buf[3] = (p->frequency < 150000000 ? 0x01 :
+ p->frequency < 445000000 ? 0x02 : 0x04);
+ buf[4] = 0xde;
+ buf[5] = 0x20;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) != 1)
+ return -EIO;
+
+ /* wait for the pll lock */
+ msg.flags = I2C_M_RD;
+ msg.len = 1;
+ for (i = 0; i < 20; i++) {
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) == 1 && (buf[0] & 0x40))
+ break;
+
+ msleep(10);
+ }
+
+ /* switch the charge pump to the lower current */
+ msg.flags = 0;
+ msg.len = 2;
+ msg.buf = &buf[2];
+ buf[2] &= ~0x40;
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) != 1)
+ return -EIO;
+
+ return 0;
+}
+
+static int vp2033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ int err = 0;
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ mantis_frontend_soft_reset(mantis);
+ msleep(250);
+
+ dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
+ fe = dvb_attach(tda10021_attach, &vp2033_tda1002x_cu1216_config,
+ adapter,
+ read_pwm(mantis));
+
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
+ vp2033_tda1002x_cu1216_config.demod_address);
+ } else {
+ fe = dvb_attach(tda10023_attach, &vp2033_tda10023_cu1216_config,
+ adapter,
+ read_pwm(mantis));
+
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x",
+ vp2033_tda1002x_cu1216_config.demod_address);
+ }
+ }
+
+ if (fe) {
+ fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set;
+ dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success");
+ } else {
+ return -1;
+ }
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+
+ mantis->fe = fe;
+ dprintk(MANTIS_DEBUG, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp2033_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_204,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp2033_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+};
diff --git a/drivers/media/pci/mantis/mantis_vp2033.h b/drivers/media/pci/mantis/mantis_vp2033.h
new file mode 100644
index 000000000000..c55242b79d54
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_vp2033.h
@@ -0,0 +1,30 @@
+/*
+ Mantis VP-2033 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP2033_H
+#define __MANTIS_VP2033_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_2033_DVB_C 0x0008
+
+extern struct mantis_hwconfig vp2033_config;
+
+#endif /* __MANTIS_VP2033_H */
diff --git a/drivers/media/pci/mantis/mantis_vp2040.c b/drivers/media/pci/mantis/mantis_vp2040.c
new file mode 100644
index 000000000000..d480741afd78
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_vp2040.c
@@ -0,0 +1,187 @@
+/*
+ Mantis VP-2040 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "tda1002x.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp2040.h"
+
+#define MANTIS_MODEL_NAME "VP-2040"
+#define MANTIS_DEV_TYPE "DVB-C"
+
+struct tda1002x_config vp2040_tda1002x_cu1216_config = {
+ .demod_address = 0x18 >> 1,
+ .invert = 1,
+};
+
+struct tda10023_config vp2040_tda10023_cu1216_config = {
+ .demod_address = 0x18 >> 1,
+ .invert = 1,
+};
+
+static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ struct mantis_pci *mantis = fe->dvb->priv;
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ u8 buf[6];
+ struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf)};
+ int i;
+
+#define CU1216_IF 36125000
+#define TUNER_MUL 62500
+
+ u32 div = (p->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = 0xce;
+ buf[3] = (p->frequency < 150000000 ? 0x01 :
+ p->frequency < 445000000 ? 0x02 : 0x04);
+ buf[4] = 0xde;
+ buf[5] = 0x20;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) != 1)
+ return -EIO;
+
+ /* wait for the pll lock */
+ msg.flags = I2C_M_RD;
+ msg.len = 1;
+ for (i = 0; i < 20; i++) {
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) == 1 && (buf[0] & 0x40))
+ break;
+
+ msleep(10);
+ }
+
+ /* switch the charge pump to the lower current */
+ msg.flags = 0;
+ msg.len = 2;
+ msg.buf = &buf[2];
+ buf[2] &= ~0x40;
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) != 1)
+ return -EIO;
+
+ return 0;
+}
+
+static u8 read_pwm(struct mantis_pci *mantis)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ u8 b = 0xff;
+ u8 pwm;
+ struct i2c_msg msg[] = {
+ {.addr = 0x50, .flags = 0, .buf = &b, .len = 1},
+ {.addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1}
+ };
+
+ if ((i2c_transfer(adapter, msg, 2) != 2)
+ || (pwm == 0xff))
+ pwm = 0x48;
+
+ return pwm;
+}
+
+static int vp2040_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ int err = 0;
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ mantis_frontend_soft_reset(mantis);
+ msleep(250);
+
+ dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
+ fe = dvb_attach(tda10021_attach, &vp2040_tda1002x_cu1216_config,
+ adapter,
+ read_pwm(mantis));
+
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
+ vp2040_tda1002x_cu1216_config.demod_address);
+ } else {
+ fe = dvb_attach(tda10023_attach, &vp2040_tda10023_cu1216_config,
+ adapter,
+ read_pwm(mantis));
+
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x",
+ vp2040_tda1002x_cu1216_config.demod_address);
+ }
+ }
+
+ if (fe) {
+ fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set;
+ dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success");
+ } else {
+ return -1;
+ }
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+ mantis->fe = fe;
+ dprintk(MANTIS_DEBUG, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp2040_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_204,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp2040_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+};
diff --git a/drivers/media/pci/mantis/mantis_vp2040.h b/drivers/media/pci/mantis/mantis_vp2040.h
new file mode 100644
index 000000000000..d125e219b685
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_vp2040.h
@@ -0,0 +1,32 @@
+/*
+ Mantis VP-2040 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP2040_H
+#define __MANTIS_VP2040_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_2040_DVB_C 0x0043
+#define CINERGY_C 0x1178
+#define CABLESTAR_HD2 0x0002
+
+extern struct mantis_hwconfig vp2040_config;
+
+#endif /* __MANTIS_VP2040_H */
diff --git a/drivers/media/pci/mantis/mantis_vp3028.c b/drivers/media/pci/mantis/mantis_vp3028.c
new file mode 100644
index 000000000000..4155c838a18a
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_vp3028.c
@@ -0,0 +1,38 @@
+/*
+ Mantis VP-3028 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "mantis_common.h"
+#include "mantis_vp3028.h"
+
+struct zl10353_config mantis_vp3028_config = {
+ .demod_address = 0x0f,
+};
+
+#define MANTIS_MODEL_NAME "VP-3028"
+#define MANTIS_DEV_TYPE "DVB-T"
+
+struct mantis_hwconfig vp3028_mantis_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_188,
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+};
diff --git a/drivers/media/pci/mantis/mantis_vp3028.h b/drivers/media/pci/mantis/mantis_vp3028.h
new file mode 100644
index 000000000000..b07be6adc522
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_vp3028.h
@@ -0,0 +1,33 @@
+/*
+ Mantis VP-3028 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP3028_H
+#define __MANTIS_VP3028_H
+
+#include "dvb_frontend.h"
+#include "mantis_common.h"
+#include "zl10353.h"
+
+#define MANTIS_VP_3028_DVB_T 0x0028
+
+extern struct zl10353_config mantis_vp3028_config;
+extern struct mantis_hwconfig vp3028_mantis_config;
+
+#endif /* __MANTIS_VP3028_H */
diff --git a/drivers/media/pci/mantis/mantis_vp3030.c b/drivers/media/pci/mantis/mantis_vp3030.c
new file mode 100644
index 000000000000..c09308cd3ac6
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_vp3030.c
@@ -0,0 +1,105 @@
+/*
+ Mantis VP-3030 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "zl10353.h"
+#include "tda665x.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp3030.h"
+
+struct zl10353_config mantis_vp3030_config = {
+ .demod_address = 0x0f,
+};
+
+struct tda665x_config env57h12d5_config = {
+ .name = "ENV57H12D5 (ET-50DT)",
+ .addr = 0x60,
+ .frequency_min = 47000000,
+ .frequency_max = 862000000,
+ .frequency_offst = 3616667,
+ .ref_multiplier = 6, /* 1/6 MHz */
+ .ref_divider = 100000, /* 1/6 MHz */
+};
+
+#define MANTIS_MODEL_NAME "VP-3030"
+#define MANTIS_DEV_TYPE "DVB-T"
+
+
+static int vp3030_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ int err = 0;
+
+ mantis_gpio_set_bits(mantis, config->reset, 0);
+ msleep(100);
+ err = mantis_frontend_power(mantis, POWER_ON);
+ msleep(100);
+ mantis_gpio_set_bits(mantis, config->reset, 1);
+
+ if (err == 0) {
+ msleep(250);
+ dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
+ fe = dvb_attach(zl10353_attach, &mantis_vp3030_config, adapter);
+
+ if (!fe)
+ return -1;
+
+ dvb_attach(tda665x_attach, fe, &env57h12d5_config, adapter);
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+
+ }
+ mantis->fe = fe;
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp3030_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_188,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp3030_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+
+ .i2c_mode = MANTIS_BYTE_MODE
+};
diff --git a/drivers/media/pci/mantis/mantis_vp3030.h b/drivers/media/pci/mantis/mantis_vp3030.h
new file mode 100644
index 000000000000..5f12c4266277
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_vp3030.h
@@ -0,0 +1,30 @@
+/*
+ Mantis VP-3030 driver
+
+ Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP3030_H
+#define __MANTIS_VP3030_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_3030_DVB_T 0x0024
+
+extern struct mantis_hwconfig vp3030_config;
+
+#endif /* __MANTIS_VP3030_H */
diff --git a/drivers/media/pci/ngene/Kconfig b/drivers/media/pci/ngene/Kconfig
new file mode 100644
index 000000000000..64c84702ba5c
--- /dev/null
+++ b/drivers/media/pci/ngene/Kconfig
@@ -0,0 +1,13 @@
+config DVB_NGENE
+ tristate "Micronas nGene support"
+ depends on DVB_CORE && PCI && I2C
+ select DVB_LNBP21 if !DVB_FE_CUSTOMISE
+ select DVB_STV6110x if !DVB_FE_CUSTOMISE
+ select DVB_STV090x if !DVB_FE_CUSTOMISE
+ select DVB_LGDT330X if !DVB_FE_CUSTOMISE
+ select DVB_DRXK if !DVB_FE_CUSTOMISE
+ select DVB_TDA18271C2DD if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMISE
+ ---help---
+ Support for Micronas PCI express cards with nGene bridge.
+
diff --git a/drivers/media/pci/ngene/Makefile b/drivers/media/pci/ngene/Makefile
new file mode 100644
index 000000000000..63997089f9d1
--- /dev/null
+++ b/drivers/media/pci/ngene/Makefile
@@ -0,0 +1,14 @@
+#
+# Makefile for the nGene device driver
+#
+
+ngene-objs := ngene-core.o ngene-i2c.o ngene-cards.o ngene-dvb.o
+
+obj-$(CONFIG_DVB_NGENE) += ngene.o
+
+ccflags-y += -Idrivers/media/dvb-core/
+ccflags-y += -Idrivers/media/dvb-frontends/
+ccflags-y += -Idrivers/media/common/tuners/
+
+# For the staging CI driver cxd2099
+ccflags-y += -Idrivers/staging/media/cxd2099/
diff --git a/drivers/media/pci/ngene/ngene-cards.c b/drivers/media/pci/ngene/ngene-cards.c
new file mode 100644
index 000000000000..a6cd6959ad19
--- /dev/null
+++ b/drivers/media/pci/ngene/ngene-cards.c
@@ -0,0 +1,823 @@
+/*
+ * ngene-cards.c: nGene PCIe bridge driver - card specific info
+ *
+ * Copyright (C) 2005-2007 Micronas
+ *
+ * Copyright (C) 2008-2009 Ralph Metzler <rjkm@metzlerbros.de>
+ * Modifications for new nGene firmware,
+ * support for EEPROM-copying,
+ * support for new dual DVB-S2 card prototype
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 only, as published by the Free Software Foundation.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+#include "ngene.h"
+
+/* demods/tuners */
+#include "stv6110x.h"
+#include "stv090x.h"
+#include "lnbh24.h"
+#include "lgdt330x.h"
+#include "mt2131.h"
+#include "tda18271c2dd.h"
+#include "drxk.h"
+#include "drxd.h"
+#include "dvb-pll.h"
+
+
+/****************************************************************************/
+/* Demod/tuner attachment ***************************************************/
+/****************************************************************************/
+
+static int tuner_attach_stv6110(struct ngene_channel *chan)
+{
+ struct i2c_adapter *i2c;
+ struct stv090x_config *feconf = (struct stv090x_config *)
+ chan->dev->card_info->fe_config[chan->number];
+ struct stv6110x_config *tunerconf = (struct stv6110x_config *)
+ chan->dev->card_info->tuner_config[chan->number];
+ struct stv6110x_devctl *ctl;
+
+ /* tuner 1+2: i2c adapter #0, tuner 3+4: i2c adapter #1 */
+ if (chan->number < 2)
+ i2c = &chan->dev->channel[0].i2c_adapter;
+ else
+ i2c = &chan->dev->channel[1].i2c_adapter;
+
+ ctl = dvb_attach(stv6110x_attach, chan->fe, tunerconf, i2c);
+ if (ctl == NULL) {
+ printk(KERN_ERR DEVICE_NAME ": No STV6110X found!\n");
+ return -ENODEV;
+ }
+
+ feconf->tuner_init = ctl->tuner_init;
+ feconf->tuner_sleep = ctl->tuner_sleep;
+ feconf->tuner_set_mode = ctl->tuner_set_mode;
+ feconf->tuner_set_frequency = ctl->tuner_set_frequency;
+ feconf->tuner_get_frequency = ctl->tuner_get_frequency;
+ feconf->tuner_set_bandwidth = ctl->tuner_set_bandwidth;
+ feconf->tuner_get_bandwidth = ctl->tuner_get_bandwidth;
+ feconf->tuner_set_bbgain = ctl->tuner_set_bbgain;
+ feconf->tuner_get_bbgain = ctl->tuner_get_bbgain;
+ feconf->tuner_set_refclk = ctl->tuner_set_refclk;
+ feconf->tuner_get_status = ctl->tuner_get_status;
+
+ return 0;
+}
+
+
+static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+ struct ngene_channel *chan = fe->sec_priv;
+ int status;
+
+ if (enable) {
+ down(&chan->dev->pll_mutex);
+ status = chan->gate_ctrl(fe, 1);
+ } else {
+ status = chan->gate_ctrl(fe, 0);
+ up(&chan->dev->pll_mutex);
+ }
+ return status;
+}
+
+static int tuner_attach_tda18271(struct ngene_channel *chan)
+{
+ struct i2c_adapter *i2c;
+ struct dvb_frontend *fe;
+
+ i2c = &chan->dev->channel[0].i2c_adapter;
+ if (chan->fe->ops.i2c_gate_ctrl)
+ chan->fe->ops.i2c_gate_ctrl(chan->fe, 1);
+ fe = dvb_attach(tda18271c2dd_attach, chan->fe, i2c, 0x60);
+ if (chan->fe->ops.i2c_gate_ctrl)
+ chan->fe->ops.i2c_gate_ctrl(chan->fe, 0);
+ if (!fe) {
+ printk(KERN_ERR "No TDA18271 found!\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int tuner_attach_probe(struct ngene_channel *chan)
+{
+ if (chan->demod_type == 0)
+ return tuner_attach_stv6110(chan);
+ if (chan->demod_type == 1)
+ return tuner_attach_tda18271(chan);
+ return -EINVAL;
+}
+
+static int demod_attach_stv0900(struct ngene_channel *chan)
+{
+ struct i2c_adapter *i2c;
+ struct stv090x_config *feconf = (struct stv090x_config *)
+ chan->dev->card_info->fe_config[chan->number];
+
+ /* tuner 1+2: i2c adapter #0, tuner 3+4: i2c adapter #1 */
+ /* Note: Both adapters share the same i2c bus, but the demod */
+ /* driver requires that each demod has its own i2c adapter */
+ if (chan->number < 2)
+ i2c = &chan->dev->channel[0].i2c_adapter;
+ else
+ i2c = &chan->dev->channel[1].i2c_adapter;
+
+ chan->fe = dvb_attach(stv090x_attach, feconf, i2c,
+ (chan->number & 1) == 0 ? STV090x_DEMODULATOR_0
+ : STV090x_DEMODULATOR_1);
+ if (chan->fe == NULL) {
+ printk(KERN_ERR DEVICE_NAME ": No STV0900 found!\n");
+ return -ENODEV;
+ }
+
+ /* store channel info */
+ if (feconf->tuner_i2c_lock)
+ chan->fe->analog_demod_priv = chan;
+
+ if (!dvb_attach(lnbh24_attach, chan->fe, i2c, 0,
+ 0, chan->dev->card_info->lnb[chan->number])) {
+ printk(KERN_ERR DEVICE_NAME ": No LNBH24 found!\n");
+ dvb_frontend_detach(chan->fe);
+ chan->fe = NULL;
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static void cineS2_tuner_i2c_lock(struct dvb_frontend *fe, int lock)
+{
+ struct ngene_channel *chan = fe->analog_demod_priv;
+
+ if (lock)
+ down(&chan->dev->pll_mutex);
+ else
+ up(&chan->dev->pll_mutex);
+}
+
+static int i2c_read(struct i2c_adapter *adapter, u8 adr, u8 *val)
+{
+ struct i2c_msg msgs[1] = {{.addr = adr, .flags = I2C_M_RD,
+ .buf = val, .len = 1 } };
+ return (i2c_transfer(adapter, msgs, 1) == 1) ? 0 : -1;
+}
+
+static int i2c_read_reg16(struct i2c_adapter *adapter, u8 adr,
+ u16 reg, u8 *val)
+{
+ u8 msg[2] = {reg>>8, reg&0xff};
+ struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0,
+ .buf = msg, .len = 2},
+ {.addr = adr, .flags = I2C_M_RD,
+ .buf = val, .len = 1} };
+ return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1;
+}
+
+static int port_has_stv0900(struct i2c_adapter *i2c, int port)
+{
+ u8 val;
+ if (i2c_read_reg16(i2c, 0x68+port/2, 0xf100, &val) < 0)
+ return 0;
+ return 1;
+}
+
+static int port_has_drxk(struct i2c_adapter *i2c, int port)
+{
+ u8 val;
+
+ if (i2c_read(i2c, 0x29+port, &val) < 0)
+ return 0;
+ return 1;
+}
+
+static int demod_attach_drxk(struct ngene_channel *chan,
+ struct i2c_adapter *i2c)
+{
+ struct drxk_config config;
+
+ memset(&config, 0, sizeof(config));
+ config.microcode_name = "drxk_a3.mc";
+ config.qam_demod_parameter_count = 4;
+ config.adr = 0x29 + (chan->number ^ 2);
+
+ chan->fe = dvb_attach(drxk_attach, &config, i2c);
+ if (!chan->fe) {
+ printk(KERN_ERR "No DRXK found!\n");
+ return -ENODEV;
+ }
+ chan->fe->sec_priv = chan;
+ chan->gate_ctrl = chan->fe->ops.i2c_gate_ctrl;
+ chan->fe->ops.i2c_gate_ctrl = drxk_gate_ctrl;
+ return 0;
+}
+
+static int cineS2_probe(struct ngene_channel *chan)
+{
+ struct i2c_adapter *i2c;
+ struct stv090x_config *fe_conf;
+ u8 buf[3];
+ struct i2c_msg i2c_msg = { .flags = 0, .buf = buf };
+ int rc;
+
+ /* tuner 1+2: i2c adapter #0, tuner 3+4: i2c adapter #1 */
+ if (chan->number < 2)
+ i2c = &chan->dev->channel[0].i2c_adapter;
+ else
+ i2c = &chan->dev->channel[1].i2c_adapter;
+
+ if (port_has_stv0900(i2c, chan->number)) {
+ chan->demod_type = 0;
+ fe_conf = chan->dev->card_info->fe_config[chan->number];
+ /* demod found, attach it */
+ rc = demod_attach_stv0900(chan);
+ if (rc < 0 || chan->number < 2)
+ return rc;
+
+ /* demod #2: reprogram outputs DPN1 & DPN2 */
+ i2c_msg.addr = fe_conf->address;
+ i2c_msg.len = 3;
+ buf[0] = 0xf1;
+ switch (chan->number) {
+ case 2:
+ buf[1] = 0x5c;
+ buf[2] = 0xc2;
+ break;
+ case 3:
+ buf[1] = 0x61;
+ buf[2] = 0xcc;
+ break;
+ default:
+ return -ENODEV;
+ }
+ rc = i2c_transfer(i2c, &i2c_msg, 1);
+ if (rc != 1) {
+ printk(KERN_ERR DEVICE_NAME ": could not setup DPNx\n");
+ return -EIO;
+ }
+ } else if (port_has_drxk(i2c, chan->number^2)) {
+ chan->demod_type = 1;
+ demod_attach_drxk(chan, i2c);
+ } else {
+ printk(KERN_ERR "No demod found on chan %d\n", chan->number);
+ return -ENODEV;
+ }
+ return 0;
+}
+
+
+static struct lgdt330x_config aver_m780 = {
+ .demod_address = 0xb2 >> 1,
+ .demod_chip = LGDT3303,
+ .serial_mpeg = 0x00, /* PARALLEL */
+ .clock_polarity_flip = 1,
+};
+
+static struct mt2131_config m780_tunerconfig = {
+ 0xc0 >> 1
+};
+
+/* A single func to attach the demo and tuner, rather than
+ * use two sep funcs like the current design mandates.
+ */
+static int demod_attach_lg330x(struct ngene_channel *chan)