aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorAndrew F. Davis <afd@ti.com>2017-06-05 08:52:08 -0500
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2017-06-09 11:54:54 +0200
commitde0d6dbdbdb23ddb85f10d54a516e794f9a873e0 (patch)
tree835e0f7aca2983b9147913a228d8656d47aa6bc9 /drivers
parentacb7e8f7448efef4ba1d86247cacbd201df733ab (diff)
w1: Add subsystem kernel public interface
Like other subsystems we should be able to define slave devices outside of the w1 directory. To do this we move public facing interface definitions to include/linux/w1.h and rename the internal definition file to w1_internal.h. As w1_family.h and w1_int.h contained almost entirely public driver interface definitions we simply removed these files and moved the remaining definitions into w1_internal.h. With this we can now start to move slave devices out of w1/slaves and into the subsystem based on the function they implement, again like other drivers. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Sebastian Reichel <sre@kernel.org> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/power/supply/ds2760_battery.c2
-rw-r--r--drivers/power/supply/ds2780_battery.c2
-rw-r--r--drivers/power/supply/ds2781_battery.c2
-rw-r--r--drivers/w1/masters/ds1wm.c3
-rw-r--r--drivers/w1/masters/ds2482.c3
-rw-r--r--drivers/w1/masters/ds2490.c3
-rw-r--r--drivers/w1/masters/matrox_w1.c3
-rw-r--r--drivers/w1/masters/mxc_w1.c3
-rw-r--r--drivers/w1/masters/omap_hdq.c3
-rw-r--r--drivers/w1/masters/w1-gpio.c3
-rw-r--r--drivers/w1/slaves/w1_bq27000.c6
-rw-r--r--drivers/w1/slaves/w1_ds2405.c5
-rw-r--r--drivers/w1/slaves/w1_ds2406.c6
-rw-r--r--drivers/w1/slaves/w1_ds2408.c6
-rw-r--r--drivers/w1/slaves/w1_ds2413.c6
-rw-r--r--drivers/w1/slaves/w1_ds2423.c6
-rw-r--r--drivers/w1/slaves/w1_ds2431.c6
-rw-r--r--drivers/w1/slaves/w1_ds2433.c6
-rw-r--r--drivers/w1/slaves/w1_ds2438.c5
-rw-r--r--drivers/w1/slaves/w1_ds2760.c7
-rw-r--r--drivers/w1/slaves/w1_ds2780.c7
-rw-r--r--drivers/w1/slaves/w1_ds2781.c7
-rw-r--r--drivers/w1/slaves/w1_ds28e04.c6
-rw-r--r--drivers/w1/slaves/w1_smem.c7
-rw-r--r--drivers/w1/slaves/w1_therm.c10
-rw-r--r--drivers/w1/w1.c6
-rw-r--r--drivers/w1/w1.h336
-rw-r--r--drivers/w1/w1_family.c3
-rw-r--r--drivers/w1/w1_family.h98
-rw-r--r--drivers/w1/w1_int.c3
-rw-r--r--drivers/w1/w1_int.h27
-rw-r--r--drivers/w1/w1_internal.h87
-rw-r--r--drivers/w1/w1_io.c2
-rw-r--r--drivers/w1/w1_netlink.c2
-rw-r--r--drivers/w1/w1_netlink.h2
35 files changed, 158 insertions, 531 deletions
diff --git a/drivers/power/supply/ds2760_battery.c b/drivers/power/supply/ds2760_battery.c
index 17225689e3f6..ae180dc929c9 100644
--- a/drivers/power/supply/ds2760_battery.c
+++ b/drivers/power/supply/ds2760_battery.c
@@ -28,7 +28,7 @@
#include <linux/platform_device.h>
#include <linux/power_supply.h>
-#include "../../w1/w1.h"
+#include <linux/w1.h>
#include "../../w1/slaves/w1_ds2760.h"
struct ds2760_device_info {
diff --git a/drivers/power/supply/ds2780_battery.c b/drivers/power/supply/ds2780_battery.c
index 1b3b6fa89c28..8edd4aa5f475 100644
--- a/drivers/power/supply/ds2780_battery.c
+++ b/drivers/power/supply/ds2780_battery.c
@@ -21,7 +21,7 @@
#include <linux/power_supply.h>
#include <linux/idr.h>
-#include "../../w1/w1.h"
+#include <linux/w1.h>
#include "../../w1/slaves/w1_ds2780.h"
/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
diff --git a/drivers/power/supply/ds2781_battery.c b/drivers/power/supply/ds2781_battery.c
index cc0149131f89..4400402f9ec5 100644
--- a/drivers/power/supply/ds2781_battery.c
+++ b/drivers/power/supply/ds2781_battery.c
@@ -19,7 +19,7 @@
#include <linux/power_supply.h>
#include <linux/idr.h>
-#include "../../w1/w1.h"
+#include <linux/w1.h>
#include "../../w1/slaves/w1_ds2781.h"
/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
diff --git a/drivers/w1/masters/ds1wm.c b/drivers/w1/masters/ds1wm.c
index e0b8a4bc73df..fd2e9da27c4b 100644
--- a/drivers/w1/masters/ds1wm.c
+++ b/drivers/w1/masters/ds1wm.c
@@ -25,8 +25,7 @@
#include <asm/io.h>
-#include "../w1.h"
-#include "../w1_int.h"
+#include <linux/w1.h>
#define DS1WM_CMD 0x00 /* R/W 4 bits command */
diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c
index e8730ea3e3aa..d49681cd29af 100644
--- a/drivers/w1/masters/ds2482.c
+++ b/drivers/w1/masters/ds2482.c
@@ -20,8 +20,7 @@
#include <linux/delay.h>
#include <asm/delay.h>
-#include "../w1.h"
-#include "../w1_int.h"
+#include <linux/w1.h>
/**
* Allow the active pullup to be disabled, default is enabled.
diff --git a/drivers/w1/masters/ds2490.c b/drivers/w1/masters/ds2490.c
index d748e34d4ce5..46ccb2fc4f60 100644
--- a/drivers/w1/masters/ds2490.c
+++ b/drivers/w1/masters/ds2490.c
@@ -25,8 +25,7 @@
#include <linux/usb.h>
#include <linux/slab.h>
-#include "../w1_int.h"
-#include "../w1.h"
+#include <linux/w1.h>
/* USB Standard */
/* USB Control request vendor type */
diff --git a/drivers/w1/masters/matrox_w1.c b/drivers/w1/masters/matrox_w1.c
index f20d03ecfd1d..d83d7c99d81d 100644
--- a/drivers/w1/masters/matrox_w1.c
+++ b/drivers/w1/masters/matrox_w1.c
@@ -34,8 +34,7 @@
#include <linux/pci_ids.h>
#include <linux/pci.h>
-#include "../w1.h"
-#include "../w1_int.h"
+#include <linux/w1.h>
/*
* Matrox G400 DDC registers.
diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c
index a4621757a47f..74f2e6e6202a 100644
--- a/drivers/w1/masters/mxc_w1.c
+++ b/drivers/w1/masters/mxc_w1.c
@@ -19,8 +19,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
-#include "../w1.h"
-#include "../w1_int.h"
+#include <linux/w1.h>
/*
* MXC W1 Register offsets
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index 3302cbd2344a..3612542b6044 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -19,8 +19,7 @@
#include <linux/pm_runtime.h>
#include <linux/of.h>
-#include "../w1.h"
-#include "../w1_int.h"
+#include <linux/w1.h>
#define MOD_NAME "OMAP_HDQ:"
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index a373ae69d9f6..a90728ceec5a 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -20,8 +20,7 @@
#include <linux/of.h>
#include <linux/delay.h>
-#include "../w1.h"
-#include "../w1_int.h"
+#include <linux/w1.h>
static u8 w1_gpio_set_pullup(void *data, int delay)
{
diff --git a/drivers/w1/slaves/w1_bq27000.c b/drivers/w1/slaves/w1_bq27000.c
index d480900a28ab..8046ac45381a 100644
--- a/drivers/w1/slaves/w1_bq27000.c
+++ b/drivers/w1/slaves/w1_bq27000.c
@@ -17,9 +17,9 @@
#include <linux/mutex.h>
#include <linux/power/bq27xxx_battery.h>
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_FAMILY_BQ27000 0x01
#define HDQ_CMD_READ (0)
#define HDQ_CMD_WRITE (1<<7)
diff --git a/drivers/w1/slaves/w1_ds2405.c b/drivers/w1/slaves/w1_ds2405.c
index d5d54876cb64..42a1e81060ce 100644
--- a/drivers/w1/slaves/w1_ds2405.c
+++ b/drivers/w1/slaves/w1_ds2405.c
@@ -24,8 +24,9 @@
#include <linux/string.h>
#include <linux/types.h>
-#include "../w1.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_FAMILY_DS2405 0x05
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Maciej S. Szmigiero <mail@maciej.szmigiero.name>");
diff --git a/drivers/w1/slaves/w1_ds2406.c b/drivers/w1/slaves/w1_ds2406.c
index 709bd5e02eed..fac266366ca3 100644
--- a/drivers/w1/slaves/w1_ds2406.c
+++ b/drivers/w1/slaves/w1_ds2406.c
@@ -17,9 +17,9 @@
#include <linux/slab.h>
#include <linux/crc16.h>
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_FAMILY_DS2406 0x12
#define W1_F12_FUNC_READ_STATUS 0xAA
#define W1_F12_FUNC_WRITE_STATUS 0x55
diff --git a/drivers/w1/slaves/w1_ds2408.c b/drivers/w1/slaves/w1_ds2408.c
index e01d2b3997bc..b535d5ec35b6 100644
--- a/drivers/w1/slaves/w1_ds2408.c
+++ b/drivers/w1/slaves/w1_ds2408.c
@@ -15,9 +15,9 @@
#include <linux/delay.h>
#include <linux/slab.h>
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_FAMILY_DS2408 0x29
#define W1_F29_RETRIES 3
diff --git a/drivers/w1/slaves/w1_ds2413.c b/drivers/w1/slaves/w1_ds2413.c
index 9cc6f0bc2e95..492e3d010321 100644
--- a/drivers/w1/slaves/w1_ds2413.c
+++ b/drivers/w1/slaves/w1_ds2413.c
@@ -16,9 +16,9 @@
#include <linux/delay.h>
#include <linux/slab.h>
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_FAMILY_DS2413 0x3A
#define W1_F3A_RETRIES 3
#define W1_F3A_FUNC_PIO_ACCESS_READ 0xF5
diff --git a/drivers/w1/slaves/w1_ds2423.c b/drivers/w1/slaves/w1_ds2423.c
index 306240fe496c..050407c53b16 100644
--- a/drivers/w1/slaves/w1_ds2423.c
+++ b/drivers/w1/slaves/w1_ds2423.c
@@ -30,9 +30,9 @@
#include <linux/delay.h>
#include <linux/crc16.h>
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_COUNTER_DS2423 0x1D
#define CRC16_VALID 0xb001
#define CRC16_INIT 0
diff --git a/drivers/w1/slaves/w1_ds2431.c b/drivers/w1/slaves/w1_ds2431.c
index 20182d4a4b19..5adecd3face1 100644
--- a/drivers/w1/slaves/w1_ds2431.c
+++ b/drivers/w1/slaves/w1_ds2431.c
@@ -16,9 +16,9 @@
#include <linux/types.h>
#include <linux/delay.h>
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_EEPROM_DS2431 0x2D
#define W1_F2D_EEPROM_SIZE 128
#define W1_F2D_PAGE_COUNT 4
diff --git a/drivers/w1/slaves/w1_ds2433.c b/drivers/w1/slaves/w1_ds2433.c
index 86c30aceea3e..75ad70cfe8e8 100644
--- a/drivers/w1/slaves/w1_ds2433.c
+++ b/drivers/w1/slaves/w1_ds2433.c
@@ -22,9 +22,9 @@
#endif
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_EEPROM_DS2433 0x23
#define W1_EEPROM_SIZE 512
#define W1_PAGE_COUNT 16
diff --git a/drivers/w1/slaves/w1_ds2438.c b/drivers/w1/slaves/w1_ds2438.c
index 5ededb4965e1..6487fb772a20 100644
--- a/drivers/w1/slaves/w1_ds2438.c
+++ b/drivers/w1/slaves/w1_ds2438.c
@@ -13,8 +13,9 @@
#include <linux/types.h>
#include <linux/delay.h>
-#include "../w1.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_FAMILY_DS2438 0x26
#define W1_DS2438_RETRIES 3
diff --git a/drivers/w1/slaves/w1_ds2760.c b/drivers/w1/slaves/w1_ds2760.c
index f35d1e2ef9bb..26168abfb8b8 100644
--- a/drivers/w1/slaves/w1_ds2760.c
+++ b/drivers/w1/slaves/w1_ds2760.c
@@ -18,11 +18,12 @@
#include <linux/idr.h>
#include <linux/gfp.h>
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
#include "w1_ds2760.h"
+#define W1_FAMILY_DS2760 0x30
+
static int w1_ds2760_io(struct device *dev, char *buf, int addr, size_t count,
int io)
{
diff --git a/drivers/w1/slaves/w1_ds2780.c b/drivers/w1/slaves/w1_ds2780.c
index 292972212107..a60528131154 100644
--- a/drivers/w1/slaves/w1_ds2780.c
+++ b/drivers/w1/slaves/w1_ds2780.c
@@ -21,11 +21,12 @@
#include <linux/mutex.h>
#include <linux/idr.h>
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
#include "w1_ds2780.h"
+#define W1_FAMILY_DS2780 0x32
+
static int w1_ds2780_do_io(struct device *dev, char *buf, int addr,
size_t count, int io)
{
diff --git a/drivers/w1/slaves/w1_ds2781.c b/drivers/w1/slaves/w1_ds2781.c
index a5d75067b230..645be6e0b24a 100644
--- a/drivers/w1/slaves/w1_ds2781.c
+++ b/drivers/w1/slaves/w1_ds2781.c
@@ -18,11 +18,12 @@
#include <linux/platform_device.h>
#include <linux/mutex.h>
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
#include "w1_ds2781.h"
+#define W1_FAMILY_DS2781 0x3D
+
static int w1_ds2781_do_io(struct device *dev, char *buf, int addr,
size_t count, int io)
{
diff --git a/drivers/w1/slaves/w1_ds28e04.c b/drivers/w1/slaves/w1_ds28e04.c
index c62858c05e8f..ec234b846eb3 100644
--- a/drivers/w1/slaves/w1_ds28e04.c
+++ b/drivers/w1/slaves/w1_ds28e04.c
@@ -20,9 +20,9 @@
#define CRC16_INIT 0
#define CRC16_VALID 0xb001
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_FAMILY_DS28E04 0x1C
/* Allow the strong pullup to be disabled, but default to enabled.
* If it was disabled a parasite powered device might not get the required
diff --git a/drivers/w1/slaves/w1_smem.c b/drivers/w1/slaves/w1_smem.c
index 99b03bfb9941..e556b0caff71 100644
--- a/drivers/w1/slaves/w1_smem.c
+++ b/drivers/w1/slaves/w1_smem.c
@@ -27,9 +27,10 @@
#include <linux/device.h>
#include <linux/types.h>
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_FAMILY_SMEM_01 0x01
+#define W1_FAMILY_SMEM_81 0x81
static struct w1_family w1_smem_family_01 = {
.fid = W1_FAMILY_SMEM_01,
diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c
index ccaf29994a42..cb3fc3c6b0d1 100644
--- a/drivers/w1/slaves/w1_therm.c
+++ b/drivers/w1/slaves/w1_therm.c
@@ -30,9 +30,13 @@
#include <linux/slab.h>
#include <linux/delay.h>
-#include "../w1.h"
-#include "../w1_int.h"
-#include "../w1_family.h"
+#include <linux/w1.h>
+
+#define W1_THERM_DS18S20 0x10
+#define W1_THERM_DS1822 0x22
+#define W1_THERM_DS18B20 0x28
+#define W1_THERM_DS1825 0x3B
+#define W1_THERM_DS28EA00 0x42
/* Allow the strong pullup to be disabled, but default to enabled.
* If it was disabled a parasite powered device might not get the require
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 8172dee5e23c..95ea7e6b1d99 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -28,11 +28,11 @@
#include <linux/atomic.h>
-#include "w1.h"
-#include "w1_int.h"
-#include "w1_family.h"
+#include "w1_internal.h"
#include "w1_netlink.h"
+#define W1_FAMILY_DEFAULT 0
+
static int w1_timeout = 10;
module_param_named(timeout, w1_timeout, int, 0);
MODULE_PARM_DESC(timeout, "time in seconds between automatic slave searches");
diff --git a/drivers/w1/w1.h b/drivers/w1/w1.h
deleted file mode 100644
index 758a7a6322e9..000000000000
--- a/drivers/w1/w1.h
+++ /dev/null
@@ -1,336 +0,0 @@
-/*
- * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __W1_H
-#define __W1_H
-
-/**
- * struct w1_reg_num - broken out slave device id
- *
- * @family: identifies the type of device
- * @id: along with family is the unique device id
- * @crc: checksum of the other bytes
- */
-struct w1_reg_num
-{
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u64 family:8,
- id:48,
- crc:8;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- __u64 crc:8,
- id:48,
- family:8;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-};
-
-#ifdef __KERNEL__
-
-#include <linux/completion.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
-
-#include "w1_family.h"
-
-#define W1_MAXNAMELEN 32
-
-#define W1_SEARCH 0xF0
-#define W1_ALARM_SEARCH 0xEC
-#define W1_CONVERT_TEMP 0x44
-#define W1_SKIP_ROM 0xCC
-#define W1_COPY_SCRATCHPAD 0x48
-#define W1_WRITE_SCRATCHPAD 0x4E
-#define W1_READ_SCRATCHPAD 0xBE
-#define W1_READ_ROM 0x33
-#define W1_READ_PSUPPLY 0xB4
-#define W1_MATCH_ROM 0x55
-#define W1_RESUME_CMD 0xA5
-
-#define W1_SLAVE_ACTIVE 0
-#define W1_SLAVE_DETACH 1
-
-/**
- * struct w1_slave - holds a single slave device on the bus
- *
- * @owner: Points to the one wire "wire" kernel module.
- * @name: Device id is ascii.
- * @w1_slave_entry: data for the linked list
- * @reg_num: the slave id in binary
- * @refcnt: reference count, delete when 0
- * @flags: bit flags for W1_SLAVE_ACTIVE W1_SLAVE_DETACH
- * @ttl: decrement per search this slave isn't found, deatch at 0
- * @master: bus which this slave is on
- * @family: module for device family type
- * @family_data: pointer for use by the family module
- * @dev: kernel device identifier
- *
- */
-struct w1_slave
-{
- struct module *owner;
- unsigned char name[W1_MAXNAMELEN];
- struct list_head w1_slave_entry;
- struct w1_reg_num reg_num;
- atomic_t refcnt;
- int ttl;
- unsigned long flags;
-
- struct w1_master *master;
- struct w1_family *family;
- void *family_data;
- struct device dev;
-};
-
-typedef void (*w1_slave_found_callback)(struct w1_master *, u64);
-
-
-/**
- * struct w1_bus_master - operations available on a bus master
- *
- * @data: the first parameter in all the functions below
- *
- * @read_bit: Sample the line level @return the level read (0 or 1)
- *
- * @write_bit: Sets the line level
- *
- * @touch_bit: the lowest-level function for devices that really support the
- * 1-wire protocol.
- * touch_bit(0) = write-0 cycle
- * touch_bit(1) = write-1 / read cycle
- * @return the bit read (0 or 1)
- *
- * @read_byte: Reads a bytes. Same as 8 touch_bit(1) calls.
- * @return the byte read
- *
- * @write_byte: Writes a byte. Same as 8 touch_bit(x) calls.
- *
- * @read_block: Same as a series of read_byte() calls
- * @return the number of bytes read
- *
- * @write_block: Same as a series of write_byte() calls
- *
- * @triplet: Combines two reads and a smart write for ROM searches
- * @return bit0=Id bit1=comp_id bit2=dir_taken
- *
- * @reset_bus: long write-0 with a read for the presence pulse detection
- * @return -1=Error, 0=Device present, 1=No device present
- *
- * @set_pullup: Put out a strong pull-up pulse of the specified duration.
- * @return -1=Error, 0=completed
- *
- * @search: Really nice hardware can handles the different types of ROM search
- * w1_master* is passed to the slave found callback.
- * u8 is search_type, W1_SEARCH or W1_ALARM_SEARCH
- *
- * Note: read_bit and write_bit are very low level functions and should only
- * be used with hardware that doesn't really support 1-wire operations,
- * like a parallel/serial port.
- * Either define read_bit and write_bit OR define, at minimum, touch_bit and
- * reset_bus.
- *
- */
-struct w1_bus_master
-{
- void *data;
-
- u8 (*read_bit)(void *);
-
- void (*write_bit)(void *, u8);
-
- u8 (*touch_bit)(void *, u8);
-
- u8 (*read_byte)(void *);
-
- void (*write_byte)(void *, u8);
-
- u8 (*read_block)(void *, u8 *, int);
-
- void (*write_block)(void *, const u8 *, int);
-
- u8 (*triplet)(void *, u8);
-
- u8 (*reset_bus)(void *);
-
- u8 (*set_pullup)(void *, int);
-
- void (*search)(void *, struct w1_master *,
- u8, w1_slave_found_callback);
-};
-
-/**
- * enum w1_master_flags - bitfields used in w1_master.flags
- * @W1_ABORT_SEARCH: abort searching early on shutdown
- * @W1_WARN_MAX_COUNT: limit warning when the maximum count is reached
- */
-enum w1_master_flags {
- W1_ABORT_SEARCH = 0,
- W1_WARN_MAX_COUNT = 1,
-};
-
-/**
- * struct w1_master - one per bus master
- * @w1_master_entry: master linked list
- * @owner: module owner
- * @name: dynamically allocate bus name
- * @list_mutex: protect slist and async_list
- * @slist: linked list of slaves
- * @async_list: linked list of netlink commands to execute
- * @max_slave_count: maximum number of slaves to search for at a time
- * @slave_count: current number of slaves known
- * @attempts: number of searches ran
- * @slave_ttl: number of searches before a slave is timed out
- * @initialized: prevent init/removal race conditions
- * @id: w1 bus number
- * @search_count: number of automatic searches to run, -1 unlimited
- * @search_id: allows continuing a search
- * @refcnt: reference count
- * @priv: private data storage
- * @enable_pullup: allows a strong pullup
- * @pullup_duration: time for the next strong pullup
- * @flags: one of w1_master_flags
- * @thread: thread for bus search and netlink commands
- * @mutex: protect most of w1_master
- * @bus_mutex: pretect concurrent bus access
- * @driver: sysfs driver
- * @dev: sysfs device
- * @bus_master: io operations available
- * @seq: sequence number used for netlink broadcasts
- */
-struct w1_master
-{
- struct list_head w1_master_entry;
- struct module *owner;
- unsigned char name[W1_MAXNAMELEN];
- /* list_mutex protects just slist and async_list so slaves can be
- * searched for and async commands added while the master has
- * w1_master.mutex locked and is operating on the bus.
- * lock order w1_mlock, w1_master.mutex, w1_master.list_mutex
- */
- struct mutex list_mutex;
- struct list_head slist;
- struct list_head async_list;
- int max_slave_count, slave_count;
- unsigned long attempts;
- int slave_ttl;
- int initialized;
- u32 id;
- int search_count;
- /* id to start searching on, to continue a search or 0 to restart */
- u64 search_id;
-
- atomic_t refcnt;
-
- void *priv;
-
- /** 5V strong pullup enabled flag, 1 enabled, zero disabled. */
- int enable_pullup;
- /** 5V strong pullup duration in milliseconds, zero disabled. */
- int pullup_duration;
-
- long flags;
-
- struct task_struct *thread;
- struct mutex mutex;
- struct mutex bus_mutex;
-
- struct device_driver *driver;
- struct device dev;
-
- struct w1_bus_master *bus_master;
-
- u32 seq;
-};
-
-/**
- * struct w1_async_cmd - execute callback from the w1_process kthread
- * @async_entry: link entry
- * @cb: callback function, must list_del and destroy this list before
- * returning
- *
- * When inserted into the w1_master async_list, w1_process will execute
- * the callback. Embed this into the structure with the command details.
- */
-struct w1_async_cmd {
- struct list_head async_entry;
- void (*cb)(struct w1_master *dev, struct w1_async_cmd *async_cmd);
-};
-
-int w1_create_master_attributes(struct w1_master *);
-void w1_destroy_master_attributes(struct w1_master *master);
-void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb);
-void w1_search_devices(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb);
-/* call w1_unref_slave to release the reference counts w1_search_slave added */
-struct w1_slave *w1_search_slave(struct w1_reg_num *id);
-/* decrements the reference on sl->master and sl, and cleans up if zero
- * returns the reference count after it has been decremented */
-int w1_unref_slave(struct w1_slave *sl);
-void w1_slave_found(struct w1_master *dev, u64 rn);
-void w1_search_process_cb(struct w1_master *dev, u8 search_type,
- w1_slave_found_callback cb);
-struct w1_slave *w1_slave_search_device(struct w1_master *dev,
- struct w1_reg_num *rn);
-struct w1_master *w1_search_master_id(u32 id);
-
-/* Disconnect and reconnect devices in the given family. Used for finding
- * unclaimed devices after a family has been registered or releasing devices
- * after a family has been unregistered. Set attach to 1 when a new family
- * has just been registered, to 0 when it has been unregistered.
- */
-void w1_reconnect_slaves(struct w1_family *f, int attach);
-int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn);
-/* 0 success, otherwise EBUSY */
-int w1_slave_detach(struct w1_slave *sl);
-
-u8 w1_triplet(struct w1_master *dev, int bdir);
-void w1_write_8(struct w1_master *, u8);
-u8 w1_read_8(struct w1_master *);
-int w1_reset_bus(struct w1_master *);
-u8 w1_calc_crc8(u8 *, int);
-void w1_write_block(struct w1_master *, const u8 *, int);
-void w1_touch_block(struct w1_master *, u8 *, int);
-u8 w1_read_block(struct w1_master *, u8 *, int);
-int w1_reset_select_slave(struct w1_slave *sl);
-int w1_reset_resume_command(struct w1_master *);
-void w1_next_pullup(struct w1_master *, int);
-
-static inline struct w1_slave* dev_to_w1_slave(struct device *dev)
-{
- return container_of(dev, struct w1_slave, dev);
-}
-
-static inline struct w1_slave* kobj_to_w1_slave(struct kobject *kobj)
-{
- return dev_to_w1_slave(container_of(kobj, struct device, kobj));
-}
-
-static inline struct w1_master* dev_to_w1_master(struct device *dev)
-{
- return container_of(dev, struct w1_master, dev);
-}
-
-extern struct device_driver w1_master_driver;
-extern struct device w1_master_device;
-extern int w1_max_slave_count;
-extern int w1_max_slave_ttl;
-extern struct list_head w1_masters;
-extern struct mutex w1_mlock;
-
-extern int w1_process_callbacks(struct w1_master *dev);
-extern int w1_process(void *);
-
-#endif /* __KERNEL__ */
-
-#endif /* __W1_H */
diff --git a/drivers/w1/w1_family.c b/drivers/w1/w1_family.c
index 9759cdaf22f4..f14ab0b340b5 100644
--- a/drivers/w1/w1_family.c
+++ b/drivers/w1/w1_family.c
@@ -18,8 +18,7 @@
#include <linux/delay.h>
#include <linux/export.h>
-#include "w1_family.h"
-#include "w1.h"
+#include "w1_internal.h"
DEFINE_SPINLOCK(w1_flock);
static LIST_HEAD(w1_families);
diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h
deleted file mode 100644
index 869a3ff87d29..000000000000
--- a/drivers/w1/w1_family.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __W1_FAMILY_H
-#define __W1_FAMILY_H
-
-#include <linux/types.h>
-#include <linux/device.h>
-#include <linux/atomic.h>
-
-#define W1_FAMILY_DEFAULT 0
-#define W1_FAMILY_BQ27000 0x01
-#define W1_FAMILY_SMEM_01 0x01
-#define W1_FAMILY_SMEM_81 0x81
-#define W1_FAMILY_DS2405 0x05
-#define W1_THERM_DS18S20 0x10
-#define W1_FAMILY_DS28E04 0x1C
-#define W1_COUNTER_DS2423 0x1D
-#define W1_THERM_DS1822 0x22
-#define W1_EEPROM_DS2433 0x23
-#define W1_FAMILY_DS2438 0x26
-#define W1_THERM_DS18B20 0x28
-#define W1_FAMILY_DS2408 0x29
-#define W1_EEPROM_DS2431 0x2D
-#define W1_FAMILY_DS2760 0x30
-#define W1_FAMILY_DS2780 0x32
-#define W1_FAMILY_DS2413 0x3A
-#define W1_FAMILY_DS2406 0x12
-#define W1_THERM_DS1825 0x3B
-#define W1_FAMILY_DS2781 0x3D
-#define W1_THERM_DS28EA00 0x42
-
-#define MAXNAMELEN 32
-
-struct w1_slave;
-
-/**
- * struct w1_family_ops - operations for a family type
- * @add_slave: add_slave
- * @remove_slave: remove_slave
- * @groups: sysfs group
- */
-struct w1_family_ops
-{
- int (* add_slave)(struct w1_slave *);
- void (* remove_slave)(struct w1_slave *);
- const struct attribute_group **groups;
-};
-
-/**
- * struct w1_family - reference counted family structure.
- * @family_entry: family linked list
- * @fid: 8 bit family identifier
- * @fops: operations for this family
- * @refcnt: reference counter
- */
-struct w1_family
-{
- struct list_head family_entry;
- u8 fid;
-
- struct w1_family_ops *fops;
-
- atomic_t refcnt;
-};
-
-extern spinlock_t w1_flock;
-
-void w1_family_put(struct w1_family *);
-void __w1_family_get(struct w1_family *);
-struct w1_family * w1_family_registered(u8);
-void w1_unregister_family(struct w1_family *);
-int w1_register_family(struct w1_family *);
-
-/**
- * module_w1_driver() - Helper macro for registering a 1-Wire families
- * @__w1_family: w1_family struct
- *
- * Helper macro for 1-Wire families which do not do anything special in module
- * init/exit. This eliminates a lot of boilerplate. Each module may only
- * use this macro once, and calling it replaces module_init() and module_exit()
- */
-#define module_w1_family(__w1_family) \
- module_driver(__w1_family, w1_register_family, \
- w1_unregister_family)
-
-#endif /* __W1_FAMILY_H */
diff --git a/drivers/w1/w1_int.c b/drivers/w1/w1_int.c
index 4439d10709bb..1c776178f598 100644
--- a/drivers/w1/w1_int.c
+++ b/drivers/w1/w1_int.c
@@ -21,9 +21,8 @@
#include <linux/export.h>
#include <linux/moduleparam.h>
-#include "w1.h"
+#include "w1_internal.h"
#include "w1_netlink.h"
-#include "w1_int.h"
static int w1_search_count = -1; /* Default is continual scan */
module_param_named(search_count, w1_search_count, int, 0);
diff --git a/drivers/w1/w1_int.h b/drivers/w1/w1_int.h
deleted file mode 100644
index 371989159216..000000000000
--- a/drivers/w1/w1_int.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __W1_INT_H
-#define __W1_INT_H
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-
-#include "w1.h"
-
-int w1_add_master_device(struct w1_bus_master *);
-void w1_remove_master_device(struct w1_bus_master *);
-void __w1_remove_master_device(struct w1_master *);
-
-#endif /* __W1_INT_H */
diff --git a/drivers/w1/w1_internal.h b/drivers/w1/w1_internal.h
new file mode 100644
index 000000000000..1623e2fdccc7
--- /dev/null
+++ b/drivers/w1/w1_internal.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __W1_H
+#define __W1_H
+
+#include <linux/w1.h>
+
+#include <linux/completion.h>
+#include <linux/mutex.h>
+
+#define W1_SLAVE_ACTIVE 0
+#define W1_SLAVE_DETACH 1
+
+/**
+ * struct w1_async_cmd - execute callback from the w1_process kthread
+ * @async_entry: link entry
+ * @cb: callback function, must list_del and destroy this list before
+ * returning
+ *
+ * When inserted into the w1_master async_list, w1_process will execute
+ * the callback. Embed this into the structure with the command details.
+ */
+struct w1_async_cmd {
+ struct list_head async_entry;
+ void (*cb)(struct w1_master *dev, struct w1_async_cmd *async_cmd);
+};
+
+int w1_create_master_attributes(struct w1_master *master);
+void w1_destroy_master_attributes(struct w1_master *master);
+void w1_search(struct w1_master *dev, u8 search_type,
+ w1_slave_found_callback cb);
+void w1_search_devices(struct w1_master *dev, u8 search_type,
+ w1_slave_found_callback cb);
+/* call w1_unref_slave to release the reference counts w1_search_slave added */
+struct w1_slave *w1_search_slave(struct w1_reg_num *id);
+/*
+ * decrements the reference on sl->master and sl, and cleans up if zero
+ * returns the reference count after it has been decremented
+ */
+int w1_unref_slave(struct w1_slave *sl);
+void w1_slave_found(struct w1_master *dev, u64 rn);
+void w1_search_process_cb(struct w1_master *dev, u8 search_type,
+ w1_slave_found_callback cb);
+struct w1_slave *w1_slave_search_device(struct w1_master *dev,
+ struct w1_reg_num *rn);
+struct w1_master *w1_search_master_id(u32 id);
+
+/* Disconnect and reconnect devices in the given family. Used for finding
+ * unclaimed devices after a family has been registered or releasing devices
+ * after a family has been unregistered. Set attach to 1 when a new family
+ * has just been registered, to 0 when it has been unregistered.
+ */
+void w1_reconnect_slaves(struct w1_family *f, int attach);
+int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn);
+/* 0 success, otherwise EBUSY */
+int w1_slave_detach(struct w1_slave *sl);
+
+void __w1_remove_master_device(struct w1_master *dev);
+
+void w1_family_put(struct w1_family *f);
+void __w1_family_get(struct w1_family *f);
+struct w1_family *w1_family_registered(u8 fid);
+
+extern struct device_driver w1_master_driver;
+extern struct device w1_master_device;
+extern int w1_max_slave_count;
+extern int w1_max_slave_ttl;
+extern struct list_head w1_masters;
+extern struct mutex w1_mlock;
+extern spinlock_t w1_flock;
+
+int w1_process_callbacks(struct w1_master *dev);
+int w1_process(void *data);
+
+#endif /* __W1_H */
diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c
index 1134e6b1eb02..d191e1f80579 100644
--- a/drivers/w1/w1_io.c
+++ b/drivers/w1/w1_io.c
@@ -18,7 +18,7 @@
#include <linux/moduleparam.h>
#include <linux/module.h>
-#include "w1.h"
+#include "w1_internal.h"
static int w1_delay_parm = 1;
module_param_named(delay_coef, w1_delay_parm, int, 0);
diff --git a/drivers/w1/w1_netlink.c b/drivers/w1/w1_netlink.c
index 027950f997d1..f2f099caeb77 100644
--- a/drivers/w1/w1_netlink.c
+++ b/drivers/w1/w1_netlink.c
@@ -17,7 +17,7 @@
#include <linux/netlink.h>
#include <linux/connector.h>
-#include "w1.h"
+#include "w1_internal.h"
#include "w1_netlink.h"
#if defined(CONFIG_W1_CON) && (defined(CONFIG_CONNECTOR) || (defined(CONFIG_CONNECTOR_MODULE) && defined(CONFIG_W1_MODULE)))
diff --git a/drivers/w1/w1_netlink.h b/drivers/w1/w1_netlink.h
index b389e5ff5fa5..a36661cd1f05 100644
--- a/drivers/w1/w1_netlink.h
+++ b/drivers/w1/w1_netlink.h
@@ -18,7 +18,7 @@
#include <asm/types.h>
#include <linux/connector.h>
-#include "w1.h"
+#include "w1_internal.h"
/**
* enum w1_cn_msg_flags - bitfield flags for struct cn_msg.flags

Privacy Policy