aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/testing/sysfs-driver-tegra-fuse11
-rw-r--r--Documentation/arm/Samsung/Overview.txt11
-rwxr-xr-xDocumentation/arm/Samsung/clksrc-change-registers.awk1
-rw-r--r--Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt40
-rw-r--r--Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt13
-rw-r--r--Documentation/devicetree/bindings/spi/spi-samsung.txt1
-rw-r--r--Documentation/devicetree/bindings/video/samsung-fimd.txt2
-rw-r--r--MAINTAINERS4
-rw-r--r--arch/arm/Kconfig54
-rw-r--r--arch/arm/Kconfig.debug21
-rw-r--r--arch/arm/Makefile2
-rw-r--r--arch/arm/boot/dts/emev2.dtsi2
-rw-r--r--arch/arm/boot/dts/integratorap.dts1
-rw-r--r--arch/arm/boot/dts/omap5.dtsi60
-rw-r--r--arch/arm/boot/dts/r7s72100.dtsi1
-rw-r--r--arch/arm/boot/dts/tegra114.dtsi15
-rw-r--r--arch/arm/boot/dts/tegra124.dtsi15
-rw-r--r--arch/arm/boot/dts/tegra20.dtsi15
-rw-r--r--arch/arm/boot/dts/tegra30.dtsi15
-rw-r--r--arch/arm/configs/s5p64x0_defconfig68
-rw-r--r--arch/arm/configs/s5pc100_defconfig49
-rw-r--r--arch/arm/include/asm/gpio.h7
-rw-r--r--arch/arm/include/debug/clps711x.S38
-rw-r--r--arch/arm/mach-clps711x/board-autcpu12.c1
-rw-r--r--arch/arm/mach-clps711x/board-cdb89712.c1
-rw-r--r--arch/arm/mach-clps711x/board-clep7312.c3
-rw-r--r--arch/arm/mach-clps711x/board-edb7211.c8
-rw-r--r--arch/arm/mach-clps711x/board-p720t.c1
-rw-r--r--arch/arm/mach-clps711x/common.c12
-rw-r--r--arch/arm/mach-clps711x/common.h1
-rw-r--r--arch/arm/mach-clps711x/devices.c10
-rw-r--r--arch/arm/mach-clps711x/include/mach/debug-macro.S38
-rw-r--r--arch/arm/mach-clps711x/include/mach/hardware.h5
-rw-r--r--arch/arm/mach-exynos/common.h13
-rw-r--r--arch/arm/mach-exynos/exynos.c44
-rw-r--r--arch/arm/mach-exynos/headsmp.S1
-rw-r--r--arch/arm/mach-exynos/hotplug.c3
-rw-r--r--arch/arm/mach-exynos/include/mach/map.h3
-rw-r--r--arch/arm/mach-exynos/include/mach/memory.h3
-rw-r--r--arch/arm/mach-exynos/platsmp.c69
-rw-r--r--arch/arm/mach-exynos/pm.c67
-rw-r--r--arch/arm/mach-exynos/pm_domains.c9
-rw-r--r--arch/arm/mach-exynos/pmu.c1
-rw-r--r--arch/arm/mach-exynos/regs-pmu.h4
-rw-r--r--arch/arm/mach-exynos/regs-sys.h22
-rw-r--r--arch/arm/mach-integrator/Kconfig1
-rw-r--r--arch/arm/mach-integrator/include/mach/memory.h29
-rw-r--r--arch/arm/mach-integrator/integrator_cp.c3
-rw-r--r--arch/arm/mach-mmp/include/mach/mfp-pxa910.h1
-rw-r--r--arch/arm/mach-omap1/ocpi.c1
-rw-r--r--arch/arm/mach-omap2/clkt_dpll.c98
-rw-r--r--arch/arm/mach-omap2/clkt_iclk.c8
-rw-r--r--arch/arm/mach-omap2/clock.c76
-rw-r--r--arch/arm/mach-omap2/clock.h44
-rw-r--r--arch/arm/mach-omap2/control.c60
-rw-r--r--arch/arm/mach-omap2/control.h40
-rw-r--r--arch/arm/mach-omap2/ctrl_module_core_44xx.h392
-rw-r--r--arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h1409
-rw-r--r--arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h236
-rw-r--r--arch/arm/mach-omap2/dpll3xxx.c7
-rw-r--r--arch/arm/mach-omap2/dpll44xx.c19
-rw-r--r--arch/arm/mach-omap2/gpmc-nand.c79
-rw-r--r--arch/arm/mach-omap2/io.c2
-rw-r--r--arch/arm/mach-omap2/pm24xx.c31
-rw-r--r--arch/arm/mach-omap2/pm34xx.c218
-rw-r--r--arch/arm/mach-omap2/prm2xxx.c18
-rw-r--r--arch/arm/mach-omap2/prm2xxx.h1
-rw-r--r--arch/arm/mach-omap2/prm3xxx.c233
-rw-r--r--arch/arm/mach-omap2/prm3xxx.h6
-rw-r--r--arch/arm/mach-omap2/usb-tusb6010.c1
-rw-r--r--arch/arm/mach-pxa/corgi.c2
-rw-r--r--arch/arm/mach-pxa/generic.c12
-rw-r--r--arch/arm/mach-pxa/include/mach/hardware.h4
-rw-r--r--arch/arm/mach-pxa/pxa25x.c7
-rw-r--r--arch/arm/mach-pxa/pxa27x.c10
-rw-r--r--arch/arm/mach-pxa/pxa3xx.c2
-rw-r--r--arch/arm/mach-pxa/sleep.S2
-rw-r--r--arch/arm/mach-realview/core.c2
-rw-r--r--arch/arm/mach-s5p64x0/Kconfig102
-rw-r--r--arch/arm/mach-s5p64x0/Makefile36
-rw-r--r--arch/arm/mach-s5p64x0/Makefile.boot2
-rw-r--r--arch/arm/mach-s5p64x0/clock-s5p6440.c632
-rw-r--r--arch/arm/mach-s5p64x0/clock-s5p6450.c701
-rw-r--r--arch/arm/mach-s5p64x0/clock.c236
-rw-r--r--arch/arm/mach-s5p64x0/clock.h38
-rw-r--r--arch/arm/mach-s5p64x0/common.c490
-rw-r--r--arch/arm/mach-s5p64x0/common.h56
-rw-r--r--arch/arm/mach-s5p64x0/dev-audio.c176
-rw-r--r--arch/arm/mach-s5p64x0/dma.c128
-rw-r--r--arch/arm/mach-s5p64x0/i2c.h16
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/debug-macro.S32
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/dma.h26
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/gpio.h132
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/hardware.h18
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/irqs.h148
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/map.h96
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/pm-core.h119
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/regs-clock.h98
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/regs-gpio.h68
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/regs-irq.h18
-rw-r--r--arch/arm/mach-s5p64x0/irq-pm.c98
-rw-r--r--arch/arm/mach-s5p64x0/mach-smdk6440.c280
-rw-r--r--arch/arm/mach-s5p64x0/mach-smdk6450.c299
-rw-r--r--arch/arm/mach-s5p64x0/pm.c202
-rw-r--r--arch/arm/mach-s5p64x0/setup-fb-24bpp.c29
-rw-r--r--arch/arm/mach-s5p64x0/setup-i2c0.c38
-rw-r--r--arch/arm/mach-s5p64x0/setup-i2c1.c38
-rw-r--r--arch/arm/mach-s5p64x0/setup-sdhci-gpio.c104
-rw-r--r--arch/arm/mach-s5p64x0/setup-spi.c38
-rw-r--r--arch/arm/mach-s5pc100/Kconfig81
-rw-r--r--arch/arm/mach-s5pc100/Makefile32
-rw-r--r--arch/arm/mach-s5pc100/Makefile.boot2
-rw-r--r--arch/arm/mach-s5pc100/clock.c1361
-rw-r--r--arch/arm/mach-s5pc100/common.c255
-rw-r--r--arch/arm/mach-s5pc100/common.h30
-rw-r--r--arch/arm/mach-s5pc100/dev-audio.c239
-rw-r--r--arch/arm/mach-s5pc100/dma.c130
-rw-r--r--arch/arm/mach-s5pc100/include/mach/debug-macro.S39
-rw-r--r--arch/arm/mach-s5pc100/include/mach/dma.h26
-rw-r--r--arch/arm/mach-s5pc100/include/mach/entry-macro.S19
-rw-r--r--arch/arm/mach-s5pc100/include/mach/gpio.h144
-rw-r--r--arch/arm/mach-s5pc100/include/mach/hardware.h14
-rw-r--r--arch/arm/mach-s5pc100/include/mach/irqs.h115
-rw-r--r--arch/arm/mach-s5pc100/include/mach/map.h137
-rw-r--r--arch/arm/mach-s5pc100/include/mach/regs-clock.h80
-rw-r--r--arch/arm/mach-s5pc100/include/mach/regs-gpio.h38
-rw-r--r--arch/arm/mach-s5pc100/include/mach/regs-irq.h18
-rw-r--r--arch/arm/mach-s5pc100/mach-smdkc100.c264
-rw-r--r--arch/arm/mach-s5pc100/setup-fb-24bpp.c35
-rw-r--r--arch/arm/mach-s5pc100/setup-i2c0.c28
-rw-r--r--arch/arm/mach-s5pc100/setup-i2c1.c28
-rw-r--r--arch/arm/mach-s5pc100/setup-ide.c57
-rw-r--r--arch/arm/mach-s5pc100/setup-keypad.c23
-rw-r--r--arch/arm/mach-s5pc100/setup-sdhci-gpio.c70
-rw-r--r--arch/arm/mach-s5pc100/setup-spi.c41
-rw-r--r--arch/arm/mach-s5pv210/dev-audio.c2
-rw-r--r--arch/arm/mach-s5pv210/include/mach/gpio-samsung.h (renamed from arch/arm/mach-s5pv210/include/mach/gpio.h)7
-rw-r--r--arch/arm/mach-s5pv210/mach-aquila.c1
-rw-r--r--arch/arm/mach-s5pv210/mach-goni.c1
-rw-r--r--arch/arm/mach-s5pv210/mach-smdkv210.c1
-rw-r--r--arch/arm/mach-s5pv210/setup-fb-24bpp.c2
-rw-r--r--arch/arm/mach-s5pv210/setup-fimc.c3
-rw-r--r--arch/arm/mach-s5pv210/setup-i2c0.c2
-rw-r--r--arch/arm/mach-s5pv210/setup-i2c1.c2
-rw-r--r--arch/arm/mach-s5pv210/setup-i2c2.c2
-rw-r--r--arch/arm/mach-s5pv210/setup-ide.c2
-rw-r--r--arch/arm/mach-s5pv210/setup-keypad.c2
-rw-r--r--arch/arm/mach-s5pv210/setup-sdhci-gpio.c2
-rw-r--r--arch/arm/mach-s5pv210/setup-spi.c2
-rw-r--r--arch/arm/mach-shmobile/board-ape6evm-reference.c6
-rw-r--r--arch/arm/mach-shmobile/board-ape6evm.c8
-rw-r--r--arch/arm/mach-shmobile/board-armadillo800eva-reference.c6
-rw-r--r--arch/arm/mach-shmobile/board-armadillo800eva.c8
-rw-r--r--arch/arm/mach-shmobile/board-bockw-reference.c6
-rw-r--r--arch/arm/mach-shmobile/board-bockw.c8
-rw-r--r--arch/arm/mach-shmobile/board-genmai-reference.c10
-rw-r--r--arch/arm/mach-shmobile/board-genmai.c10
-rw-r--r--arch/arm/mach-shmobile/board-koelsch-reference.c8
-rw-r--r--arch/arm/mach-shmobile/board-koelsch.c6
-rw-r--r--arch/arm/mach-shmobile/board-kzm9g-reference.c6
-rw-r--r--arch/arm/mach-shmobile/board-kzm9g.c8
-rw-r--r--arch/arm/mach-shmobile/board-lager-reference.c14
-rw-r--r--arch/arm/mach-shmobile/board-lager.c21
-rw-r--r--arch/arm/mach-shmobile/board-mackerel.c12
-rw-r--r--arch/arm/mach-shmobile/board-marzen-reference.c4
-rw-r--r--arch/arm/mach-shmobile/board-marzen.c4
-rw-r--r--arch/arm/mach-shmobile/clock-r7s72100.c5
-rw-r--r--arch/arm/mach-shmobile/clock-r8a73a4.c4
-rw-r--r--arch/arm/mach-shmobile/clock-r8a7740.c7
-rw-r--r--arch/arm/mach-shmobile/clock-r8a7778.c4
-rw-r--r--arch/arm/mach-shmobile/clock-r8a7779.c4
-rw-r--r--arch/arm/mach-shmobile/clock-r8a7790.c8
-rw-r--r--arch/arm/mach-shmobile/clock-r8a7791.c6
-rw-r--r--arch/arm/mach-shmobile/clock-sh7372.c4
-rw-r--r--arch/arm/mach-shmobile/clock-sh73a0.c4
-rw-r--r--arch/arm/mach-shmobile/clock.c6
-rw-r--r--arch/arm/mach-shmobile/clock.h (renamed from arch/arm/mach-shmobile/include/mach/clock.h)0
-rw-r--r--arch/arm/mach-shmobile/common.h (renamed from arch/arm/mach-shmobile/include/mach/common.h)0
-rw-r--r--arch/arm/mach-shmobile/console.c2
-rw-r--r--arch/arm/mach-shmobile/dma-register.h (renamed from arch/arm/mach-shmobile/include/mach/dma-register.h)0
-rw-r--r--arch/arm/mach-shmobile/include/mach/irqs.h16
-rw-r--r--arch/arm/mach-shmobile/include/mach/r8a7779.h12
-rw-r--r--arch/arm/mach-shmobile/intc-sh7372.c5
-rw-r--r--arch/arm/mach-shmobile/intc-sh73a0.c9
-rw-r--r--arch/arm/mach-shmobile/intc.h (renamed from arch/arm/mach-shmobile/include/mach/intc.h)0
-rw-r--r--arch/arm/mach-shmobile/irqs.h21
-rw-r--r--arch/arm/mach-shmobile/platsmp-apmu.c2
-rw-r--r--arch/arm/mach-shmobile/platsmp-scu.c2
-rw-r--r--arch/arm/mach-shmobile/platsmp.c2
-rw-r--r--arch/arm/mach-shmobile/pm-r8a7740.c4
-rw-r--r--arch/arm/mach-shmobile/pm-r8a7779.c15
-rw-r--r--arch/arm/mach-shmobile/pm-r8a7790.c6
-rw-r--r--arch/arm/mach-shmobile/pm-rcar.c2
-rw-r--r--arch/arm/mach-shmobile/pm-rcar.h (renamed from arch/arm/mach-shmobile/include/mach/pm-rcar.h)0
-rw-r--r--arch/arm/mach-shmobile/pm-rmobile.c2
-rw-r--r--arch/arm/mach-shmobile/pm-rmobile.h (renamed from arch/arm/mach-shmobile/include/mach/pm-rmobile.h)0
-rw-r--r--arch/arm/mach-shmobile/pm-sh7372.c8
-rw-r--r--arch/arm/mach-shmobile/pm-sh73a0.c2
-rw-r--r--arch/arm/mach-shmobile/r7s72100.h (renamed from arch/arm/mach-shmobile/include/mach/r7s72100.h)1
-rw-r--r--arch/arm/mach-shmobile/r8a73a4.h (renamed from arch/arm/mach-shmobile/include/mach/r8a73a4.h)0
-rw-r--r--arch/arm/mach-shmobile/r8a7740.h (renamed from arch/arm/mach-shmobile/include/mach/r8a7740.h)2
-rw-r--r--arch/arm/mach-shmobile/r8a7778.h (renamed from arch/arm/mach-shmobile/include/mach/r8a7778.h)0
-rw-r--r--arch/arm/mach-shmobile/r8a7790.h (renamed from arch/arm/mach-shmobile/include/mach/r8a7790.h)3
-rw-r--r--arch/arm/mach-shmobile/rcar-gen2.h (renamed from arch/arm/mach-shmobile/include/mach/rcar-gen2.h)0
-rw-r--r--arch/arm/mach-shmobile/setup-emev2.c19
-rw-r--r--arch/arm/mach-shmobile/setup-r7s72100.c15
-rw-r--r--arch/arm/mach-shmobile/setup-r8a73a4.c10
-rw-r--r--arch/arm/mach-shmobile/setup-r8a7740.c12
-rw-r--r--arch/arm/mach-shmobile/setup-r8a7778.c8
-rw-r--r--arch/arm/mach-shmobile/setup-r8a7779.c4
-rw-r--r--arch/arm/mach-shmobile/setup-r8a7790.c20
-rw-r--r--arch/arm/mach-shmobile/setup-r8a7791.c6
-rw-r--r--arch/arm/mach-shmobile/setup-rcar-gen2.c4
-rw-r--r--arch/arm/mach-shmobile/setup-sh7372.c12
-rw-r--r--arch/arm/mach-shmobile/setup-sh73a0.c11
-rw-r--r--arch/arm/mach-shmobile/sh7372.h (renamed from arch/arm/mach-shmobile/include/mach/sh7372.h)4
-rw-r--r--arch/arm/mach-shmobile/sh73a0.h (renamed from arch/arm/mach-shmobile/include/mach/sh73a0.h)0
-rw-r--r--arch/arm/mach-shmobile/smp-emev2.c2
-rw-r--r--arch/arm/mach-shmobile/smp-r8a7779.c4
-rw-r--r--arch/arm/mach-shmobile/smp-r8a7790.c8
-rw-r--r--arch/arm/mach-shmobile/smp-r8a7791.c4
-rw-r--r--arch/arm/mach-shmobile/smp-sh73a0.c6
-rw-r--r--arch/arm/mach-spear/spear1310.c2
-rw-r--r--arch/arm/mach-spear/spear1340.c6
-rw-r--r--arch/arm/mach-spear/spear13xx.c2
-rw-r--r--arch/arm/mach-sti/platsmp.c6
-rw-r--r--arch/arm/mach-tegra/Makefile7
-rw-r--r--arch/arm/mach-tegra/apbio.c206
-rw-r--r--arch/arm/mach-tegra/apbio.h22
-rw-r--r--arch/arm/mach-tegra/board-paz00.c3
-rw-r--r--arch/arm/mach-tegra/board.h7
-rw-r--r--arch/arm/mach-tegra/cpuidle-tegra114.c10
-rw-r--r--arch/arm/mach-tegra/cpuidle-tegra20.c16
-rw-r--r--arch/arm/mach-tegra/cpuidle-tegra30.c10
-rw-r--r--arch/arm/mach-tegra/cpuidle.c7
-rw-r--r--arch/arm/mach-tegra/flowctrl.c11
-rw-r--r--arch/arm/mach-tegra/fuse.c252
-rw-r--r--arch/arm/mach-tegra/fuse.h79
-rw-r--r--arch/arm/mach-tegra/hotplug.c30
-rw-r--r--arch/arm/mach-tegra/io.c8
-rw-r--r--arch/arm/mach-tegra/irq.c8
-rw-r--r--arch/arm/mach-tegra/platsmp.c29
-rw-r--r--arch/arm/mach-tegra/pm-tegra20.c1
-rw-r--r--arch/arm/mach-tegra/pm-tegra30.c1
-rw-r--r--arch/arm/mach-tegra/pm.c63
-rw-r--r--arch/arm/mach-tegra/pm.h10
-rw-r--r--arch/arm/mach-tegra/pmc.c413
-rw-r--r--arch/arm/mach-tegra/pmc.h49
-rw-r--r--arch/arm/mach-tegra/powergate.c515
-rw-r--r--arch/arm/mach-tegra/reset-handler.S7
-rw-r--r--arch/arm/mach-tegra/reset.c19
-rw-r--r--arch/arm/mach-tegra/sleep-tegra30.S7
-rw-r--r--arch/arm/mach-tegra/sleep.h3
-rw-r--r--arch/arm/mach-tegra/tegra.c37
-rw-r--r--arch/arm/mach-ux500/board-mop500-regulators.c2
-rw-r--r--arch/arm/mach-ux500/cache-l2x0.c18
-rw-r--r--arch/arm/mach-ux500/cpu-db8500.c8
-rw-r--r--arch/arm/mach-ux500/cpu.c2
-rw-r--r--arch/arm/mach-ux500/timer.c2
-rw-r--r--arch/arm/mach-versatile/core.c2
-rw-r--r--arch/arm/mach-vexpress/Kconfig1
-rw-r--r--arch/arm/mach-vexpress/ct-ca9x4.c3
-rw-r--r--arch/arm/mach-vt8500/vt8500.c6
-rw-r--r--arch/arm/plat-samsung/Kconfig30
-rw-r--r--arch/arm/plat-samsung/adc.c2
-rw-r--r--arch/arm/plat-samsung/include/plat/cpu.h29
-rw-r--r--arch/arm/plat-samsung/include/plat/devs.h17
-rw-r--r--arch/arm/plat-samsung/include/plat/fb.h14
-rw-r--r--arch/arm/plat-samsung/include/plat/gpio-core.h3
-rw-r--r--arch/arm/plat-samsung/include/plat/s5p-clock.h2
-rw-r--r--arch/arm/plat-samsung/include/plat/sdhci.h77
-rw-r--r--arch/arm/plat-samsung/pm-gpio.c2
-rw-r--r--arch/arm/plat-samsung/s5p-irq-eint.c2
-rw-r--r--arch/arm/plat-versatile/Kconfig3
-rw-r--r--arch/arm/plat-versatile/Makefile1
-rw-r--r--arch/arm/plat-versatile/include/plat/clcd.h9
-rw-r--r--drivers/amba/tegra-ahb.c3
-rw-r--r--drivers/bus/arm-cci.c3
-rw-r--r--drivers/clk/tegra/clk-periph-gate.c3
-rw-r--r--drivers/clk/tegra/clk-tegra30.c5
-rw-r--r--drivers/clk/tegra/clk.c3
-rw-r--r--drivers/gpio/gpio-samsung.c725
-rw-r--r--drivers/gpu/drm/tegra/gr3d.c3
-rw-r--r--drivers/gpu/drm/tegra/sor.c3
-rw-r--r--drivers/iommu/tegra-smmu.c3
-rw-r--r--drivers/irqchip/Kconfig1
-rw-r--r--drivers/misc/fuse/Makefile1
-rw-r--r--drivers/mtd/onenand/Kconfig4
-rw-r--r--drivers/mtd/onenand/samsung.c25
-rw-r--r--drivers/pci/host/pci-tegra.c5
-rw-r--r--drivers/soc/Makefile1
-rw-r--r--drivers/soc/tegra/Makefile4
-rw-r--r--drivers/soc/tegra/common.c30
-rw-r--r--drivers/soc/tegra/fuse/Makefile8
-rw-r--r--drivers/soc/tegra/fuse/fuse-tegra.c163
-rw-r--r--drivers/soc/tegra/fuse/fuse-tegra20.c215
-rw-r--r--drivers/soc/tegra/fuse/fuse-tegra30.c224
-rw-r--r--drivers/soc/tegra/fuse/fuse.h71
-rw-r--r--drivers/soc/tegra/fuse/speedo-tegra114.c (renamed from arch/arm/mach-tegra/tegra114_speedo.c)56
-rw-r--r--drivers/soc/tegra/fuse/speedo-tegra124.c168
-rw-r--r--drivers/soc/tegra/fuse/speedo-tegra20.c (renamed from arch/arm/mach-tegra/tegra20_speedo.c)45
-rw-r--r--drivers/soc/tegra/fuse/speedo-tegra30.c (renamed from arch/arm/mach-tegra/tegra30_speedo.c)176
-rw-r--r--drivers/soc/tegra/fuse/tegra-apbmisc.c115
-rw-r--r--drivers/soc/tegra/pmc.c957
-rw-r--r--drivers/spi/spi-s3c64xx.c22
-rw-r--r--drivers/video/fbdev/Kconfig10
-rw-r--r--drivers/video/fbdev/Makefile1
-rw-r--r--drivers/video/fbdev/amba-clcd-versatile.c (renamed from arch/arm/plat-versatile/clcd.c)2
-rw-r--r--drivers/video/fbdev/s3c-fb.c65
-rw-r--r--include/linux/platform_data/video-clcd-versatile.h27
-rw-r--r--include/linux/tegra-soc.h22
-rw-r--r--include/soc/tegra/ahb.h (renamed from include/linux/tegra-ahb.h)6
-rw-r--r--include/soc/tegra/common.h14
-rw-r--r--include/soc/tegra/cpuidle.h (renamed from include/linux/tegra-cpuidle.h)6
-rw-r--r--include/soc/tegra/fuse.h65
-rw-r--r--include/soc/tegra/pm.h38
-rw-r--r--include/soc/tegra/pmc.h (renamed from include/linux/tegra-powergate.h)31
-rw-r--r--include/video/samsung_fimd.h2
-rw-r--r--sound/soc/samsung/goni_wm8994.c2
319 files changed, 3715 insertions, 13811 deletions
diff --git a/Documentation/ABI/testing/sysfs-driver-tegra-fuse b/Documentation/ABI/testing/sysfs-driver-tegra-fuse
new file mode 100644
index 000000000000..69f5af632657
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-tegra-fuse
@@ -0,0 +1,11 @@
+What: /sys/devices/*/<our-device>/fuse
+Date: February 2014
+Contact: Peter De Schrijver <pdeschrijver@nvidia.com>
+Description: read-only access to the efuses on Tegra20, Tegra30, Tegra114
+ and Tegra124 SoC's from NVIDIA. The efuses contain write once
+ data programmed at the factory. The data is layed out in 32bit
+ words in LSB first format. Each bit represents a single value
+ as decoded from the fuse registers. Bits order/assignment
+ exactly matches the HW registers, including any unused bits.
+Users: any user space application which wants to read the efuses on
+ Tegra SoC's
diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt
index 658abb258cef..8f7309bad460 100644
--- a/Documentation/arm/Samsung/Overview.txt
+++ b/Documentation/arm/Samsung/Overview.txt
@@ -13,8 +13,6 @@ Introduction
- S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
- S3C64XX: S3C6400 and S3C6410
- - S5P6440
- - S5PC100
- S5PC110 / S5PV210
@@ -34,8 +32,6 @@ Configuration
A number of configurations are supplied, as there is no current way of
unifying all the SoCs into one kernel.
- s5p6440_defconfig - S5P6440 specific default configuration
- s5pc100_defconfig - S5PC100 specific default configuration
s5pc110_defconfig - S5PC110 specific default configuration
s5pv210_defconfig - S5PV210 specific default configuration
@@ -67,13 +63,6 @@ Layout changes
where to simplify the include and dependency issues involved with having
so many different platform directories.
- It was decided to remove plat-s5pc1xx as some of the support was already
- in plat-s5p or plat-samsung, with the S5PC110 support added with S5PV210
- the only user was the S5PC100. The S5PC100 specific items where moved to
- arch/arm/mach-s5pc100.
-
-
-
Port Contributors
-----------------
diff --git a/Documentation/arm/Samsung/clksrc-change-registers.awk b/Documentation/arm/Samsung/clksrc-change-registers.awk
index 0c50220851fb..d9174fabe37e 100755
--- a/Documentation/arm/Samsung/clksrc-change-registers.awk
+++ b/Documentation/arm/Samsung/clksrc-change-registers.awk
@@ -68,7 +68,6 @@ BEGIN {
while (getline line < ARGV[1] > 0) {
if (line ~ /\#define.*_MASK/ &&
- !(line ~ /S5PC100_EPLL_MASK/) &&
!(line ~ /USB_SIG_MASK/)) {
splitdefine(line, fields)
name = fields[0]
diff --git a/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt
new file mode 100644
index 000000000000..d8c98c7614d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt
@@ -0,0 +1,40 @@
+NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 fuse block.
+
+Required properties:
+- compatible : should be:
+ "nvidia,tegra20-efuse"
+ "nvidia,tegra30-efuse"
+ "nvidia,tegra114-efuse"
+ "nvidia,tegra124-efuse"
+ Details:
+ nvidia,tegra20-efuse: Tegra20 requires using APB DMA to read the fuse data
+ due to a hardware bug. Tegra20 also lacks certain information which is
+ available in later generations such as fab code, lot code, wafer id,..
+ nvidia,tegra30-efuse, nvidia,tegra114-efuse and nvidia,tegra124-efuse:
+ The differences between these SoCs are the size of the efuse array,
+ the location of the spare (OEM programmable) bits and the location of
+ the speedo data.
+- reg: Should contain 1 entry: the entry gives the physical address and length
+ of the fuse registers.
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - fuse
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - fuse
+
+Example:
+
+ fuse@7000f800 {
+ compatible = "nvidia,tegra20-efuse";
+ reg = <0x7000F800 0x400>,
+ <0x70000000 0x400>;
+ clocks = <&tegra_car TEGRA20_CLK_FUSE>;
+ clock-names = "fuse";
+ resets = <&tegra_car 39>;
+ reset-names = "fuse";
+ };
+
+
diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
new file mode 100644
index 000000000000..b97b8bef1fe5
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
@@ -0,0 +1,13 @@
+NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 apbmisc block
+
+Required properties:
+- compatible : should be:
+ "nvidia,tegra20-apbmisc"
+ "nvidia,tegra30-apbmisc"
+ "nvidia,tegra114-apbmisc"
+ "nvidia,tegra124-apbmisc"
+- reg: Should contain 2 entries: the first entry gives the physical address
+ and length of the registers which contain revision and debug features.
+ The second entry gives the physical address and length of the
+ registers indicating the strapping options.
+
diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt
index 792efbaedc54..1e8a8578148f 100644
--- a/Documentation/devicetree/bindings/spi/spi-samsung.txt
+++ b/Documentation/devicetree/bindings/spi/spi-samsung.txt
@@ -8,7 +8,6 @@ Required SoC Specific Properties:
- compatible: should be one of the following.
- samsung,s3c2443-spi: for s3c2443, s3c2416 and s3c2450 platforms
- samsung,s3c6410-spi: for s3c6410 platforms
- - samsung,s5p6440-spi: for s5p6440 and s5p6450 platforms
- samsung,s5pv210-spi: for s5pv210 and s5pc110 platforms
- samsung,exynos4210-spi: for exynos4 and exynos5 platforms
diff --git a/Documentation/devicetree/bindings/video/samsung-fimd.txt b/Documentation/devicetree/bindings/video/samsung-fimd.txt
index 8428fcff8037..ecc899b9817b 100644
--- a/Documentation/devicetree/bindings/video/samsung-fimd.txt
+++ b/Documentation/devicetree/bindings/video/samsung-fimd.txt
@@ -8,8 +8,6 @@ Required properties:
- compatible: value should be one of the following
"samsung,s3c2443-fimd"; /* for S3C24XX SoCs */
"samsung,s3c6400-fimd"; /* for S3C64XX SoCs */
- "samsung,s5p6440-fimd"; /* for S5P64X0 SoCs */
- "samsung,s5pc100-fimd"; /* for S5PC100 SoC */
"samsung,s5pv210-fimd"; /* for S5PV210 SoC */
"samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
"samsung,exynos5250-fimd"; /* for Exynos5 SoCs */
diff --git a/MAINTAINERS b/MAINTAINERS
index 8b0c4e22119c..28f2e65d738e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1116,14 +1116,13 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-berlin/
-ARM/Marvell Dove/Kirkwood/MV78xx0/Orion SOC support
+ARM/Marvell Dove/MV78xx0/Orion SOC support
M: Jason Cooper <jason@lakedaemon.net>
M: Andrew Lunn <andrew@lunn.ch>
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-dove/
-F: arch/arm/mach-kirkwood/
F: arch/arm/mach-mv78xx0/
F: arch/arm/mach-orion5x/
F: arch/arm/plat-orion/
@@ -1376,6 +1375,7 @@ F: drivers/pinctrl/pinctrl-st.c
F: drivers/media/rc/st_rc.c
F: drivers/i2c/busses/i2c-st.c
F: drivers/tty/serial/st-asc.c
+F: drivers/mmc/host/sdhci-st.c
ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d31c500653a2..31b17f3fe2b4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -239,13 +239,6 @@ config ARM_PATCH_PHYS_VIRT
this feature (eg, building a kernel for a single machine) and
you need to shrink the kernel to the minimal size.
-config NEED_MACH_GPIO_H
- bool
- help
- Select this when mach/gpio.h is required to provide special
- definitions for this platform. The need for mach/gpio.h should
- be avoided when possible.
-
config NEED_MACH_IO_H
bool
help
@@ -334,7 +327,6 @@ config ARCH_INTEGRATOR
select HAVE_TCM
select ICST
select MULTI_IRQ_HANDLER
- select NEED_MACH_MEMORY_H
select PLAT_VERSATILE
select SPARSE_IRQ
select USE_OF
@@ -354,7 +346,6 @@ config ARCH_REALVIEW
select ICST
select NEED_MACH_MEMORY_H
select PLAT_VERSATILE
- select PLAT_VERSATILE_CLCD
help
This enables support for ARM Ltd RealView boards.
@@ -369,7 +360,6 @@ config ARCH_VERSATILE
select HAVE_MACH_CLKDEV
select ICST
select PLAT_VERSATILE
- select PLAT_VERSATILE_CLCD
select PLAT_VERSATILE_CLOCK
select VERSATILE_FPGA_IRQ
help
@@ -772,42 +762,6 @@ config ARCH_S3C64XX
help
Samsung S3C64XX series based systems
-config ARCH_S5P64X0
- bool "Samsung S5P6440 S5P6450"
- select ATAGS
- select CLKDEV_LOOKUP
- select CLKSRC_SAMSUNG_PWM
- select CPU_V6
- select GENERIC_CLOCKEVENTS
- select GPIO_SAMSUNG
- select HAVE_S3C2410_I2C if I2C
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
- select HAVE_S3C_RTC if RTC_CLASS
- select NEED_MACH_GPIO_H
- select SAMSUNG_ATAGS
- select SAMSUNG_WDT_RESET
- help
- Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
- SMDK6450.
-
-config ARCH_S5PC100
- bool "Samsung S5PC100"
- select ARCH_REQUIRE_GPIOLIB
- select ATAGS
- select CLKDEV_LOOKUP
- select CLKSRC_SAMSUNG_PWM
- select CPU_V7
- select GENERIC_CLOCKEVENTS
- select GPIO_SAMSUNG
- select HAVE_S3C2410_I2C if I2C
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
- select HAVE_S3C_RTC if RTC_CLASS
- select NEED_MACH_GPIO_H
- select SAMSUNG_ATAGS
- select SAMSUNG_WDT_RESET
- help
- Samsung S5PC100 series based systems
-
config ARCH_S5PV210
bool "Samsung S5PV210/S5PC110"
select ARCH_HAS_HOLES_MEMORYMODEL
@@ -821,7 +775,6 @@ config ARCH_S5PV210
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
- select NEED_MACH_GPIO_H
select NEED_MACH_MEMORY_H
select SAMSUNG_ATAGS
help
@@ -1018,10 +971,6 @@ source "arch/arm/mach-s3c24xx/Kconfig"
source "arch/arm/mach-s3c64xx/Kconfig"
-source "arch/arm/mach-s5p64x0/Kconfig"
-
-source "arch/arm/mach-s5pc100/Kconfig"
-
source "arch/arm/mach-s5pv210/Kconfig"
source "arch/arm/mach-exynos/Kconfig"
@@ -1583,7 +1532,7 @@ source kernel/Kconfig.preempt
config HZ_FIXED
int
- default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \
+ default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
ARCH_S5PV210 || ARCH_EXYNOS4
default AT91_TIMER_HZ if ARCH_AT91
default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY
@@ -2208,7 +2157,6 @@ menu "Power management options"
source "kernel/power/Kconfig"
config ARCH_SUSPEND_POSSIBLE
- depends on !ARCH_S5PC100
depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \
CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK
def_bool y
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 8f90595069a1..b24b5dc720e4 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -617,53 +617,41 @@ choice
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
- bool "Use S3C UART 0 for low-level debug"
+ bool "Use Samsung S3C UART 0 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to UART 0. The port must have been initialised
by the boot-loader before use.
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
config DEBUG_S3C_UART1
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
- bool "Use S3C UART 1 for low-level debug"
+ bool "Use Samsung S3C UART 1 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to UART 1. The port must have been initialised
by the boot-loader before use.
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
config DEBUG_S3C_UART2
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
- bool "Use S3C UART 2 for low-level debug"
+ bool "Use Samsung S3C UART 2 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to UART 2. The port must have been initialised
by the boot-loader before use.
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
config DEBUG_S3C_UART3
depends on PLAT_SAMSUNG && ARCH_EXYNOS
select DEBUG_EXYNOS_UART
- bool "Use S3C UART 3 for low-level debug"
+ bool "Use Samsung S3C UART 3 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to UART 3. The port must have been initialised
by the boot-loader before use.
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
config DEBUG_S3C2410_UART0
depends on ARCH_S3C24XX
select DEBUG_S3C2410_UART
@@ -991,6 +979,7 @@ config DEBUG_STI_UART
config DEBUG_LL_INCLUDE
string
default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
+ default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2
default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
default "debug/exynos.S" if DEBUG_EXYNOS_UART
default "debug/efm32.S" if DEBUG_LL_UART_EFM32
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 718913dfe815..1e42de45110b 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -190,8 +190,6 @@ machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
machine-$(CONFIG_ARCH_RPC) += rpc
machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx
machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx
-machine-$(CONFIG_ARCH_S5P64X0) += s5p64x0
-machine-$(CONFIG_ARCH_S5PC100) += s5pc100
machine-$(CONFIG_ARCH_S5PV210) += s5pv210
machine-$(CONFIG_ARCH_SA1100) += sa1100
machine-$(CONFIG_ARCH_SHMOBILE) += shmobile
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index e37985fa10e2..00eeed3721b6 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -31,11 +31,13 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ clock-frequency = <533000000>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
+ clock-frequency = <533000000>;
};
};
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
index b10e6351da53..cf06e32ee108 100644
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/integratorap.dts
@@ -8,6 +8,7 @@
/ {
model = "ARM Integrator/AP";
compatible = "arm,integrator-ap";
+ dma-ranges = <0x80000000 0x0 0x80000000>;
aliases {
arm,timer-primary = &timer2;
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index a4ed54988866..8eee6fbef7ad 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -985,6 +985,66 @@
dma-names = "audio_tx";
};
};
+
+ abb_mpu: regulator-abb-mpu {
+ compatible = "ti,abb-v2";
+ regulator-name = "abb_mpu";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>,
+ <0x4a0021c4 0x8>, <0x4ae0c318 0x4>;
+ reg-names = "base-address", "int-address",
+ "efuse-address", "ldo-address";
+ ti,tranxdone-status-mask = <0x80>;
+ /* LDOVBBMPU_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBMPU_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1060000 0 0x0 0 0x02000000 0x01F00000
+ 1250000 0 0x4 0 0x02000000 0x01F00000
+ >;
+ };
+
+ abb_mm: regulator-abb-mm {
+ compatible = "ti,abb-v2";
+ regulator-name = "abb_mm";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
+ <0x4a0021a4 0x8>, <0x4ae0c314 0x4>;
+ reg-names = "base-address", "int-address",
+ "efuse-address", "ldo-address";
+ ti,tranxdone-status-mask = <0x80000000>;
+ /* LDOVBBMM_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBMM_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1025000 0 0x0 0 0x02000000 0x01F00000
+ 1120000 0 0x4 0 0x02000000 0x01F00000
+ >;
+ };
};
};
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index f50fbc8f3bd9..bdee22541189 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -144,6 +144,7 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ clock-frequency = <400000000>;
};
};
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index 7da20ca633dd..80b8eddb4105 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -220,6 +220,12 @@
interrupt-controller;
};
+ apbmisc@70000800 {
+ compatible = "nvidia,tegra114-apbmisc", "nvidia,tegra20-apbmisc";
+ reg = <0x70000800 0x64 /* Chip revision */
+ 0x70000008 0x04>; /* Strapping options */
+ };
+
pinmux: pinmux@70000868 {
compatible = "nvidia,tegra114-pinmux";
reg = <0x70000868 0x148 /* Pad control registers */
@@ -485,6 +491,15 @@
clock-names = "pclk", "clk32k_in";
};
+ fuse@7000f800 {
+ compatible = "nvidia,tegra114-efuse";
+ reg = <0x7000f800 0x400>;
+ clocks = <&tegra_car TEGRA114_CLK_FUSE>;
+ clock-names = "fuse";
+ resets = <&tegra_car 39>;
+ reset-names = "fuse";
+ };
+
iommu@70019010 {
compatible = "nvidia,tegra114-smmu", "nvidia,tegra30-smmu";
reg = <0x70019010 0x02c
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index aa8753a7c211..d44e9b91e207 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -179,6 +179,12 @@
#dma-cells = <1>;
};
+ apbmisc@0,70000800 {
+ compatible = "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc";
+ reg = <0x0 0x70000800 0x0 0x64>, /* Chip revision */
+ <0x0 0x7000E864 0x0 0x04>; /* Strapping options */
+ };
+
pinmux: pinmux@0,70000868 {
compatible = "nvidia,tegra124-pinmux";
reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */
@@ -449,6 +455,15 @@
clock-names = "pclk", "clk32k_in";
};
+ fuse@0,7000f800 {
+ compatible = "nvidia,tegra124-efuse";
+ reg = <0x0 0x7000f800 0x0 0x400>;
+ clocks = <&tegra_car TEGRA124_CLK_FUSE>;
+ clock-names = "fuse";
+ resets = <&tegra_car 39>;
+ reset-names = "fuse";
+ };
+
sdhci@0,700b0000 {
compatible = "nvidia,tegra124-sdhci";
reg = <0x0 0x700b0000 0x0 0x200>;
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 935df8906f25..1908f6937e53 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -236,6 +236,12 @@
interrupt-controller;
};
+ apbmisc@70000800 {
+ compatible = "nvidia,tegra20-apbmisc";
+ reg = <0x70000800 0x64 /* Chip revision */
+ 0x70000008 0x04>; /* Strapping options */
+ };
+
pinmux: pinmux@70000014 {
compatible = "nvidia,tegra20-pinmux";
reg = <0x70000014 0x10 /* Tri-state registers */
@@ -545,6 +551,15 @@
#size-cells = <0>;
};
+ fuse@7000f800 {
+ compatible = "nvidia,tegra20-efuse";
+ reg = <0x7000F800 0x400>;
+ clocks = <&tegra_car TEGRA20_CLK_FUSE>;
+ clock-names = "fuse";
+ resets = <&tegra_car 39>;
+ reset-names = "fuse";
+ };
+
pcie-controller@80003000 {
compatible = "nvidia,tegra20-pcie";
device_type = "pci";
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 54805ce5efe0..6b35c29278d7 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -335,6 +335,12 @@
interrupt-controller;
};
+ apbmisc@70000800 {
+ compatible = "nvidia,tegra30-apbmisc", "nvidia,tegra20-apbmisc";
+ reg = <0x70000800 0x64 /* Chip revision */
+ 0x70000008 0x04>; /* Strapping options */
+ };
+
pinmux: pinmux@70000868 {
compatible = "nvidia,tegra30-pinmux";
reg = <0x70000868 0xd4 /* Pad control registers */
@@ -631,6 +637,15 @@
nvidia,ahb = <&ahb>;
};
+ fuse@7000f800 {
+ compatible = "nvidia,tegra30-efuse";
+ reg = <0x7000f800 0x400>;
+ clocks = <&tegra_car TEGRA30_CLK_FUSE>;
+ clock-names = "fuse";
+ resets = <&tegra_car 39>;
+ reset-names = "fuse";
+ };
+
ahub@70080000 {
compatible = "nvidia,tegra30-ahub";
reg = <0x70080000 0x200
diff --git a/arch/arm/configs/s5p64x0_defconfig b/arch/arm/configs/s5p64x0_defconfig
deleted file mode 100644
index ad6b61b0bd11..000000000000
--- a/arch/arm/configs/s5p64x0_defconfig
+++ /dev/null
@@ -1,68 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S5P64X0=y
-CONFIG_S3C_BOOT_ERROR_RESET=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_MACH_SMDK6440=y
-CONFIG_MACH_SMDK6450=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_32v6K=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-CONFIG_FPE_NWFPE=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_S3C_UART=1
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig
deleted file mode 100644
index 41bafc94dd85..000000000000
--- a/arch/arm/configs/s5pc100_defconfig
+++ /dev/null
@@ -1,49 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S5PC100=y
-CONFIG_MACH_SMDKC100=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M"
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_EEPROM_AT24=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_SDIO_UART=y
-CONFIG_MMC_SDHCI=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index 477e0206e016..504dcddebfcc 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -5,12 +5,6 @@
#define ARCH_NR_GPIOS CONFIG_ARCH_NR_GPIO
#endif
-/* not all ARM platforms necessarily support this API ... */
-#ifdef CONFIG_NEED_MACH_GPIO_H
-#include <mach/gpio.h>
-#endif
-
-#ifndef __ARM_GPIOLIB_COMPLEX
/* Note: this may rely upon the value of ARCH_NR_GPIOS set in mach/gpio.h */
#include <asm-generic/gpio.h>
@@ -18,7 +12,6 @@
#define gpio_get_value __gpio_get_value
#define gpio_set_value __gpio_set_value
#define gpio_cansleep __gpio_cansleep
-#endif
/*
* Provide a default gpio_to_irq() which should satisfy every case.
diff --git a/arch/arm/include/debug/clps711x.S b/arch/arm/include/debug/clps711x.S
new file mode 100644
index 000000000000..abe225436686
--- /dev/null
+++ b/arch/arm/include/debug/clps711x.S
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef CONFIG_DEBUG_CLPS711X_UART2
+#define CLPS711X_UART_PADDR (0x80000000 + 0x0000)
+#define CLPS711X_UART_VADDR (0xfeff0000 + 0x0000)
+#else
+#define CLPS711X_UART_PADDR (0x80000000 + 0x1000)
+#define CLPS711X_UART_VADDR (0xfeff0000 + 0x1000)
+#endif
+
+#define SYSFLG (0x0140)
+#define SYSFLG_UBUSY (1 << 11)
+#define UARTDR (0x0480)
+
+ .macro addruart, rp, rv, tmp
+ ldr \rv, =CLPS711X_UART_VADDR
+ ldr \rp, =CLPS711X_UART_PADDR
+ .endm
+
+ .macro waituart,rd,rx
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #UARTDR]
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #SYSFLG]
+ tst \rd, #SYSFLG_UBUSY
+ bne 1001b
+ .endm
diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c
index d62ca16d5394..45abf6bd5f68 100644
--- a/arch/arm/mach-clps711x/board-autcpu12.c
+++ b/arch/arm/mach-clps711x/board-autcpu12.c
@@ -266,7 +266,6 @@ MACHINE_START(AUTCPU12, "autronix autcpu12")
/* Maintainer: Thomas Gleixner */
.atag_offset = 0x20000,
.map_io = clps711x_map_io,
- .init_early = clps711x_init_early,
.init_irq = clps711x_init_irq,
.init_time = clps711x_timer_init,
.init_machine = autcpu12_init,
diff --git a/arch/arm/mach-clps711x/board-cdb89712.c b/arch/arm/mach-clps711x/board-cdb89712.c
index e261a47f2aff..1ec378c334e5 100644
--- a/arch/arm/mach-clps711x/board-cdb89712.c
+++ b/arch/arm/mach-clps711x/board-cdb89712.c
@@ -140,7 +140,6 @@ MACHINE_START(CDB89712, "Cirrus-CDB89712")
/* Maintainer: Ray Lehtiniemi */
.atag_offset = 0x100,
.map_io = clps711x_map_io,
- .init_early = clps711x_init_early,
.init_irq = clps711x_init_irq,
.init_time = clps711x_timer_init,
.init_machine = cdb89712_init,
diff --git a/arch/arm/mach-clps711x/board-clep7312.c b/arch/arm/mach-clps711x/board-clep7312.c
index 94a7add88a3f..f9ca22b646bf 100644
--- a/arch/arm/mach-clps711x/board-clep7312.c
+++ b/arch/arm/mach-clps711x/board-clep7312.c
@@ -25,6 +25,7 @@
#include <asm/mach/arch.h>
#include "common.h"
+#include "devices.h"
static void __init
fixup_clep7312(struct tag *tags, char **cmdline)
@@ -37,8 +38,8 @@ MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
.atag_offset = 0x0100,
.fixup = fixup_clep7312,
.map_io = clps711x_map_io,
- .init_early = clps711x_init_early,
.init_irq = clps711x_init_irq,
.init_time = clps711x_timer_init,
+ .init_machine = clps711x_devices_init,
.restart = clps711x_restart,
MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c
index 6144fb5cdc36..fdf54d40909a 100644
--- a/arch/arm/mach-clps711x/board-edb7211.c
+++ b/arch/arm/mach-clps711x/board-edb7211.c
@@ -148,11 +148,6 @@ fixup_edb7211(struct tag *tags, char **cmdline)
memblock_add(0xc1000000, SZ_8M);
}
-static void __init edb7211_init(void)
-{
- clps711x_devices_init();
-}
-
static void __init edb7211_init_late(void)
{
gpio_request_array(edb7211_gpios, ARRAY_SIZE(edb7211_gpios));
@@ -178,10 +173,9 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
.fixup = fixup_edb7211,
.reserve = edb7211_reserve,
.map_io = clps711x_map_io,
- .init_early = clps711x_init_early,
.init_irq = clps711x_init_irq,
.init_time = clps711x_timer_init,
- .init_machine = edb7211_init,
+ .init_machine = clps711x_devices_init,
.init_late = edb7211_init_late,
.restart = clps711x_restart,
MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c
index 96bcc76c4437..e68dd629bda2 100644
--- a/arch/arm/mach-clps711x/board-p720t.c
+++ b/arch/arm/mach-clps711x/board-p720t.c
@@ -365,7 +365,6 @@ MACHINE_START(P720T, "ARM-Prospector720T")
.atag_offset = 0x100,
.fixup = fixup_p720t,
.map_io = clps711x_map_io,
- .init_early = clps711x_init_early,
.init_irq = clps711x_init_irq,
.init_time = clps711x_timer_init,
.init_machine = p720t_init,
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index aee81fa46ccf..2a6323b15782 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -193,15 +193,3 @@ void clps711x_restart(enum reboot_mode mode, const char *cmd)
{
soft_restart(0);
}
-
-static void clps711x_idle(void)
-{
- clps_writel(1, HALT);
- asm("mov r0, r0");
- asm("mov r0, r0");
-}
-
-void __init clps711x_init_early(void)
-{
- arm_pm_idle = clps711x_idle;
-}
diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h
index 7489139d5d63..f88189963898 100644
--- a/arch/arm/mach-clps711x/common.h
+++ b/arch/arm/mach-clps711x/common.h
@@ -13,7 +13,6 @@ extern void clps711x_map_io(void);
extern void clps711x_init_irq(void);
extern void clps711x_timer_init(void);
extern void clps711x_restart(enum reboot_mode mode, const char *cmd);
-extern void clps711x_init_early(void);
/* drivers/irqchip/irq-clps711x.c */
void clps711x_intc_init(phys_addr_t, resource_size_t);
diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c
index 2001488a5ef2..0c689d3a6710 100644
--- a/arch/arm/mach-clps711x/devices.c
+++ b/arch/arm/mach-clps711x/devices.c
@@ -14,6 +14,15 @@
#include <mach/hardware.h>
+static const struct resource clps711x_cpuidle_res __initconst =
+ DEFINE_RES_MEM(CLPS711X_PHYS_BASE + HALT, SZ_128);
+
+static void __init clps711x_add_cpuidle(void)
+{
+ platform_device_register_simple("clps711x-cpuidle", PLATFORM_DEVID_NONE,
+ &clps711x_cpuidle_res, 1);
+}
+
static const phys_addr_t clps711x_gpios[][2] __initconst = {
{ PADR, PADDR },
{ PBDR, PBDDR },
@@ -83,6 +92,7 @@ static void __init clps711x_add_uart(void)
void __init clps711x_devices_init(void)
{
+ clps711x_add_cpuidle();
clps711x_add_gpio();
clps711x_add_syscon();
clps711x_add_uart();
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
deleted file mode 100644
index cb3684f8dae0..000000000000
--- a/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/* arch/arm/mach-clps711x/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <mach/hardware.h>
-
- .macro addruart, rp, rv, tmp
-#ifndef CONFIG_DEBUG_CLPS711X_UART2
- mov \rp, #0x0000 @ UART1
-#else
- mov \rp, #0x1000 @ UART2
-#endif
- orr \rv, \rp, #CLPS711X_VIRT_BASE
- orr \rp, \rp, #CLPS711X_PHYS_BASE
- .endm
-
- .macro senduart,rd,rx
- str \rd, [\rx, #0x0480] @ UARTDR
- .endm
-
- .macro waituart,rd,rx
- .endm
-
- .macro busyuart,rd,rx
-1001: ldr \rd, [\rx, #0x0140] @ SYSFLGx
- tst \rd, #1 << 11 @ UBUSYx
- bne 1001b
- .endm
-
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
index 5d6afda1c0e8..833129c9f798 100644
--- a/arch/arm/mach-clps711x/include/mach/hardware.h
+++ b/arch/arm/mach-clps711x/include/mach/hardware.h
@@ -24,10 +24,7 @@
#include <mach/clps711x.h>
-#define IO_ADDRESS(x) (0xdc000000 + (((x) & 0x03ffffff) | \
- (((x) >> 2) & 0x3c000000)))
-
-#define CLPS711X_VIRT_BASE IOMEM(IO_ADDRESS(CLPS711X_PHYS_BASE))
+#define CLPS711X_VIRT_BASE IOMEM(0xfeff0000)
#ifndef __ASSEMBLY__
#define clps_readb(off) readb(CLPS711X_VIRT_BASE + (off))
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 1ee91763fa7c..f8daa9cc5617 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -111,25 +111,14 @@ IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK)
#define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5410() || \
soc_is_exynos5420() || soc_is_exynos5800())
-void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1);
-
-struct map_desc;
extern void __iomem *sysram_ns_base_addr;
extern void __iomem *sysram_base_addr;
-void exynos_init_io(void);
-void exynos_restart(enum reboot_mode mode, const char *cmd);
+extern void __iomem *pmu_base_addr;
void exynos_sysram_init(void);
-void exynos_cpuidle_init(void);
-void exynos_cpufreq_init(void);
-void exynos_init_late(void);
void exynos_firmware_init(void);
-#ifdef CONFIG_PINCTRL_EXYNOS
extern u32 exynos_get_eint_wake_mask(void);
-#else
-static inline u32 exynos_get_eint_wake_mask(void) { return 0xffffffff; }
-#endif
#ifdef CONFIG_PM_SLEEP
extern void __init exynos_pm_init(void);
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 66c9b9614f3c..3164ef2e6b6c 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -19,6 +19,7 @@
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
+#include <linux/irqchip.h>
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
@@ -29,6 +30,9 @@
#include "common.h"
#include "mfc.h"
#include "regs-pmu.h"
+#include "regs-sys.h"
+
+void __iomem *pmu_base_addr;
static struct map_desc exynos4_iodesc[] __initdata = {
{
@@ -143,7 +147,7 @@ static struct map_desc exynos5_iodesc[] __initdata = {
},
};
-void exynos_restart(enum reboot_mode mode, const char *cmd)
+static void exynos_restart(enum reboot_mode mode, const char *cmd)
{
struct device_node *np;
u32 val = 0x1;
@@ -204,7 +208,7 @@ void __init exynos_sysram_init(void)
}
}
-void __init exynos_init_late(void)
+static void __init exynos_init_late(void)
{
if (of_machine_is_compatible("samsung,exynos5440"))
/* to be supported later */
@@ -251,7 +255,7 @@ static void __init exynos_map_io(void)
iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
}
-void __init exynos_init_io(void)
+static void __init exynos_init_io(void)
{
debug_ll_io_init();
@@ -263,6 +267,39 @@ void __init exynos_init_io(void)
exynos_map_io();
}
+static const struct of_device_id exynos_dt_pmu_match[] = {
+ { .compatible = "samsung,exynos3250-pmu" },
+ { .compatible = "samsung,exynos4210-pmu" },
+ { .compatible = "samsung,exynos4212-pmu" },
+ { .compatible = "samsung,exynos4412-pmu" },
+ { .compatible = "samsung,exynos5250-pmu" },
+ { .compatible = "samsung,exynos5420-pmu" },
+ { /*sentinel*/ },
+};
+
+static void exynos_map_pmu(void)
+{
+ struct device_node *np;
+
+ np = of_find_matching_node(NULL, exynos_dt_pmu_match);
+ if (np)
+ pmu_base_addr = of_iomap(np, 0);
+
+ if (!pmu_base_addr)
+ panic("failed to find exynos pmu register\n");
+}
+
+static void __init exynos_init_irq(void)
+{
+ irqchip_init();
+ /*
+ * Since platsmp.c needs pmu base address by the time
+ * DT is not unflatten so we can't use DT APIs before
+ * init_irq
+ */
+ exynos_map_pmu();
+}
+
static void __init exynos_dt_machine_init(void)
{
struct device_node *i2c_np;
@@ -352,6 +389,7 @@ DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")
.smp = smp_ops(exynos_smp_ops),
.map_io = exynos_init_io,
.init_early = exynos_firmware_init,
+ .init_irq = exynos_init_irq,
.init_machine = exynos_dt_machine_init,
.init_late = exynos_init_late,
.dt_compat = exynos_dt_compat,
diff --git a/arch/arm/mach-exynos/headsmp.S b/arch/arm/mach-exynos/headsmp.S
index cdd9d91e9933..b54f9701e421 100644
--- a/arch/arm/mach-exynos/headsmp.S
+++ b/arch/arm/mach-exynos/headsmp.S
@@ -1,5 +1,4 @@
/*
- * linux/arch/arm/mach-exynos4/headsmp.S
*
* Cloned from linux/arch/arm/mach-realview/headsmp.S
*
diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c
index 920a4baa53cd..4d86961a7957 100644
--- a/arch/arm/mach-exynos/hotplug.c
+++ b/arch/arm/mach-exynos/hotplug.c
@@ -1,5 +1,4 @@
-/* linux arch/arm/mach-exynos4/hotplug.c
- *
+/*
* Cloned from linux/arch/arm/mach-realview/hotplug.c
*
* Copyright (C) 2002 ARM Ltd.
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 548269a60634..963002fb15c3 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-exynos/include/mach/map.h
- *
+/*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
diff --git a/arch/arm/mach-exynos/include/mach/memory.h b/arch/arm/mach-exynos/include/mach/memory.h
index 2a4cdb7cb326..e19df1f18c0d 100644
--- a/arch/arm/mach-exynos/include/mach/memory.h
+++ b/arch/arm/mach-exynos/include/mach/memory.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-exynos4/include/mach/memory.h
- *
+/*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 70d1e65a51d8..e5a8d764f24c 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-exynos4/platsmp.c
- *
+ /*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
@@ -32,6 +31,72 @@
extern void exynos4_secondary_startup(void);
+/**
+ * exynos_core_power_down : power down the specified cpu
+ * @cpu : the cpu to power down
+ *
+ * Power down the specified cpu. The sequence must be finished by a
+ * call to cpu_do_idle()
+ *
+ */
+void exynos_cpu_power_down(int cpu)
+{
+ __raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
+}
+
+/**
+ * exynos_cpu_power_up : power up the specified cpu
+ * @cpu : the cpu to power up
+ *
+ * Power up the specified cpu
+ */
+void exynos_cpu_power_up(int cpu)
+{
+ __raw_writel(S5P_CORE_LOCAL_PWR_EN,
+ EXYNOS_ARM_CORE_CONFIGURATION(cpu));
+}
+
+/**
+ * exynos_cpu_power_state : returns the power state of the cpu
+ * @cpu : the cpu to retrieve the power state from
+ *
+ */
+int exynos_cpu_power_state(int cpu)
+{
+ return (__raw_readl(EXYNOS_ARM_CORE_STATUS(cpu)) &
+ S5P_CORE_LOCAL_PWR_EN);
+}
+
+/**
+ * exynos_cluster_power_down : power down the specified cluster
+ * @cluster : the cluster to power down
+ */
+void exynos_cluster_power_down(int cluster)
+{
+ __raw_writel(0, EXYNOS_COMMON_CONFIGURATION(cluster));
+}
+
+/**
+ * exynos_cluster_power_up : power up the specified cluster
+ * @cluster : the cluster to power up
+ */
+void exynos_cluster_power_up(int cluster)
+{
+ __raw_writel(S5P_CORE_LOCAL_PWR_EN,
+ EXYNOS_COMMON_CONFIGURATION(cluster));
+}
+
+/**
+ * exynos_cluster_power_state : returns the power state of the cluster
+ * @cluster : the cluster to retrieve the power state from
+ *
+ */
+int exynos_cluster_power_state(int cluster)
+{
+ return (__raw_readl(EXYNOS_COMMON_STATUS(cluster)) &
+ S5P_CORE_LOCAL_PWR_EN);
+}
+
static inline void __iomem *cpu_boot_reg_base(void)
{
if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 67d383de614f..6ab68a068e93 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -35,6 +35,7 @@
#include "common.h"
#include "regs-pmu.h"
+#include "regs-sys.h"
/**
* struct exynos_wkup_irq - Exynos GIC to PMU IRQ mapping
@@ -100,72 +101,6 @@ static int exynos_irq_set_wake(struct irq_data *data, unsigned int state)
return -ENOENT;
}
-/**
- * exynos_core_power_down : power down the specified cpu
- * @cpu : the cpu to power down
- *
- * Power down the specified cpu. The sequence must be finished by a
- * call to cpu_do_idle()
- *
- */
-void exynos_cpu_power_down(int cpu)
-{
- __raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
-}
-
-/**
- * exynos_cpu_power_up : power up the specified cpu
- * @cpu : the cpu to power up
- *
- * Power up the specified cpu
- */
-void exynos_cpu_power_up(int cpu)
-{
- __raw_writel(S5P_CORE_LOCAL_PWR_EN,
- EXYNOS_ARM_CORE_CONFIGURATION(cpu));
-}
-
-/**
- * exynos_cpu_power_state : returns the power state of the cpu
- * @cpu : the cpu to retrieve the power state from
- *
- */
-int exynos_cpu_power_state(int cpu)
-{
- return (__raw_readl(EXYNOS_ARM_CORE_STATUS(cpu)) &
- S5P_CORE_LOCAL_PWR_EN);
-}
-
-/**
- * exynos_cluster_power_down : power down the specified cluster
- * @cluster : the cluster to power down
- */
-void exynos_cluster_power_down(int cluster)
-{
- __raw_writel(0, EXYNOS_COMMON_CONFIGURATION(cluster));
-}
-
-/**
- * exynos_cluster_power_up : power up the specified cluster
- * @cluster : the cluster to power up
- */
-void exynos_cluster_power_up(int cluster)
-{
- __raw_writel(S5P_CORE_LOCAL_PWR_EN,
- EXYNOS_COMMON_CONFIGURATION(cluster));
-}
-
-/**
- * exynos_cluster_power_state : returns the power state of the cluster
- * @cluster : the cluster to retrieve the power state from
- *
- */
-int exynos_cluster_power_state(int cluster)
-{
- return (__raw_readl(EXYNOS_COMMON_STATUS(cluster)) &
- S5P_CORE_LOCAL_PWR_EN);
-}
-
#define EXYNOS_BOOT_VECTOR_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \
S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
(sysram_base_addr + 0x24) : S5P_INFORM0))
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index 797cb134bfff..fd76e1b5a471 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -23,8 +23,7 @@
#include <linux/of_platform.h>
#include <linux/sched.h>
-#include "regs-pmu.h"
-
+#define INT_LOCAL_PWR_EN 0x7
#define MAX_CLK_PER_DOMAIN 4
/*
@@ -63,13 +62,13 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
}
}
- pwr = power_on ? S5P_INT_LOCAL_PWR_EN : 0;
+ pwr = power_on ? INT_LOCAL_PWR_EN : 0;
__raw_writel(pwr, base);
/* Wait max 1ms */
timeout = 10;
- while ((__raw_readl(base + 0x4) & S5P_INT_LOCAL_PWR_EN) != pwr) {
+ while ((__raw_readl(base + 0x4) & INT_LOCAL_PWR_EN) != pwr) {
if (!timeout) {
op = (power_on) ? "enable" : "disable";
pr_err("Power domain %s %s failed\n", domain->name, op);
@@ -231,7 +230,7 @@ static __init int exynos4_pm_init_power_domain(void)
no_clk:
platform_set_drvdata(pdev, pd);
- on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN;
+ on = __raw_readl(pd->base + 0x4) & INT_LOCAL_PWR_EN;
pm_genpd_init(&pd->pd, NULL, !on);
}
diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
index fb0deda3b3a4..dcfcb44c3c55 100644
--- a/arch/arm/mach-exynos/pmu.c
+++ b/arch/arm/mach-exynos/pmu.c
@@ -11,7 +11,6 @@
#include <linux/io.h>
#include <linux/kernel.h>
-#include <linux/bug.h>
#include "common.h"
#include "regs-pmu.h"
diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h
index 1d13b08708f0..1993e6bd5388 100644
--- a/arch/arm/mach-exynos/regs-pmu.h
+++ b/arch/arm/mach-exynos/regs-pmu.h
@@ -15,7 +15,6 @@
#include <mach/map.h>
#define S5P_PMUREG(x) (S5P_VA_PMU + (x))
-#define S5P_SYSREG(x) (S3C_VA_SYS + (x))
#define S5P_CENTRAL_SEQ_CONFIGURATION S5P_PMUREG(0x0200)
@@ -127,7 +126,6 @@
#define S5P_PAD_RET_EBIB_OPTION S5P_PMUREG(0x31A8)
#define S5P_CORE_LOCAL_PWR_EN 0x3
-#define S5P_INT_LOCAL_PWR_EN 0x7
/* Only for EXYNOS4210 */
#define S5P_CMU_CLKSTOP_LCD1_LOWPWR S5P_PMUREG(0x1154)
@@ -188,8 +186,6 @@
/* For EXYNOS5 */
-#define EXYNOS5_SYS_I2C_CFG S5P_SYSREG(0x0234)
-
#define EXYNOS5_AUTO_WDTRESET_DISABLE S5P_PMUREG(0x0408)
#define EXYNOS5_MASK_WDTRESET_REQUEST S5P_PMUREG(0x040C)
diff --git a/arch/arm/mach-exynos/regs-sys.h b/arch/arm/mach-exynos/regs-sys.h
new file mode 100644
index 000000000000..84332b0dd7a6
--- /dev/null
+++ b/arch/arm/mach-exynos/regs-sys.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS - system register definition
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_SYS_H
+#define __ASM_ARCH_REGS_SYS_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_SYSREG(x) (S3C_VA_SYS + (x))
+
+/* For EXYNOS5 */
+#define EXYNOS5_SYS_I2C_CFG S5P_SYSREG(0x0234)
+
+#endif /* __ASM_ARCH_REGS_SYS_H */
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index 64f8e2564a37..c455e974bbfe 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -17,7 +17,6 @@ config ARCH_INTEGRATOR_CP
bool "Support Integrator/CP platform"
select ARCH_CINTEGRATOR
select ARM_TIMER_SP804
- select PLAT_VERSATILE_CLCD
select SERIAL_AMBA_PL011 if TTY
select SERIAL_AMBA_PL011_CONSOLE if TTY
select SOC_BUS
diff --git a/arch/arm/mach-integrator/include/mach/memory.h b/arch/arm/mach-integrator/include/mach/memory.h
deleted file mode 100644
index 7268cb50ded0..000000000000
--- a/arch/arm/mach-integrator/include/mach/memory.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * arch/arm/mach-integrator/include/mach/memory.h
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define BUS_OFFSET UL(0x80000000)
-#define __virt_to_bus(x) ((x) - PAGE_OFFSET + BUS_OFFSET)
-#define __bus_to_virt(x) ((x) - BUS_OFFSET + PAGE_OFFSET)
-#define __pfn_to_bus(x) (__pfn_to_phys(x) + (BUS_OFFSET - PHYS_OFFSET))
-#define __bus_to_pfn(x) __phys_to_pfn((x) - (BUS_OFFSET - PHYS_OFFSET))
-
-#endif
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 0e57f8f820a5..e39097068cf9 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -18,6 +18,7 @@
#include <linux/amba/bus.h>
#include <linux/amba/kmi.h>
#include <linux/amba/clcd.h>
+#include <linux/platform_data/video-clcd-versatile.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <linux/irqchip/versatile-fpga.h>
@@ -36,8 +37,6 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <plat/clcd.h>
-
#include "hardware.h"
#include "cm.h"
#include "common.h"
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
index fbd7ee8e4897..8c78f2b16452 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
@@ -23,7 +23,6 @@
#define SM_nCS0_nCS0 MFP_CFG(SM_nCS0, AF0)
#define SM_ADV_SM_ADV MFP_CFG(SM_ADV, AF0)
#define SM_SCLK_SM_SCLK MFP_CFG(SM_SCLK, AF0)
-#define SM_SCLK_SM_SCLK MFP_CFG(SM_SCLK, AF0)
#define SM_BE0_SM_BE0 MFP_CFG(SM_BE0, AF1)
#define SM_BE1_SM_BE1 MFP_CFG(SM_BE1, AF1)
diff --git a/arch/arm/mach-omap1/ocpi.c b/arch/arm/mach-omap1/ocpi.c
index 238170cab5b7..44a3d19eb481 100644
--- a/arch/arm/mach-omap1/ocpi.c
+++ b/arch/arm/mach-omap1/ocpi.c
@@ -55,7 +55,6 @@ static struct clk *ocpi_ck;
/*
* Enables device access to OMAP buses via the OCPI bridge
- * FIXME: Add locking
*/
int ocpi_enable(void)
{
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index 67fd26a18441..b2ff6cd7ca9f 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -21,10 +21,7 @@
#include <asm/div64.h>
-#include "soc.h"
#include "clock.h"
-#include "cm-regbits-24xx.h"
-#include "cm-regbits-34xx.h"
/* DPLL rate rounding: minimum DPLL multiplier, divider values */
#define DPLL_MIN_MULTIPLIER 2
@@ -44,20 +41,12 @@
#define DPLL_ROUNDING_VAL ((DPLL_SCALE_BASE / 2) * \
(DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
-/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
-#define OMAP3430_DPLL_FINT_BAND1_MIN 750000
-#define OMAP3430_DPLL_FINT_BAND1_MAX 2100000
-#define OMAP3430_DPLL_FINT_BAND2_MIN 7500000
-#define OMAP3430_DPLL_FINT_BAND2_MAX 21000000
-
/*
* DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
* From device data manual section 4.3 "DPLL and DLL Specifications".
*/
#define OMAP3PLUS_DPLL_FINT_JTYPE_MIN 500000
#define OMAP3PLUS_DPLL_FINT_JTYPE_MAX 2500000
-#define OMAP3PLUS_DPLL_FINT_MIN 32000
-#define OMAP3PLUS_DPLL_FINT_MAX 52000000
/* _dpll_test_fint() return codes */
#define DPLL_FINT_UNDERFLOW -1
@@ -87,33 +76,31 @@ static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
/* DPLL divider must result in a valid jitter correction val */
fint = __clk_get_rate(__clk_get_parent(clk->hw.clk)) / n;
- if (cpu_is_omap24xx()) {
- /* Should not be called for OMAP2, so warn if it is called */
- WARN(1, "No fint limits available for OMAP2!\n");
- return DPLL_FINT_INVALID;
- } else if (cpu_is_omap3430()) {
- fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
- fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
- } else if (dd->flags & DPLL_J_TYPE) {
+ if (dd->flags & DPLL_J_TYPE) {
fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
} else {
- fint_min = OMAP3PLUS_DPLL_FINT_MIN;
- fint_max = OMAP3PLUS_DPLL_FINT_MAX;
+ fint_min = ti_clk_features.fint_min;
+ fint_max = ti_clk_features.fint_max;
}
- if (fint < fint_min) {
+ if (!fint_min || !fint_max) {
+ WARN(1, "No fint limits available!\n");
+ return DPLL_FINT_INVALID;
+ }
+
+ if (fint < ti_clk_features.fint_min) {
pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
n);
dd->max_divider = n;
ret = DPLL_FINT_UNDERFLOW;
- } else if (fint > fint_max) {
+ } else if (fint > ti_clk_features.fint_max) {
pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
n);
dd->min_divider = n;
ret = DPLL_FINT_INVALID;
- } else if (cpu_is_omap3430() && fint > OMAP3430_DPLL_FINT_BAND1_MAX &&
- fint < OMAP3430_DPLL_FINT_BAND2_MIN) {
+ } else if (fint > ti_clk_features.fint_band1_max &&
+ fint < ti_clk_features.fint_band2_min) {
pr_debug("rejecting n=%d due to Fint failure\n", n);
ret = DPLL_FINT_INVALID;
}
@@ -185,6 +172,34 @@ static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
return r;
}
+/**
+ * _omap2_dpll_is_in_bypass - check if DPLL is in bypass mode or not
+ * @v: bitfield value of the DPLL enable
+ *
+ * Checks given DPLL enable bitfield to see whether the DPLL is in bypass
+ * mode or not. Returns 1 if the DPLL is in bypass, 0 otherwise.
+ */
+static int _omap2_dpll_is_in_bypass(u32 v)
+{
+ u8 mask, val;
+
+ mask = ti_clk_features.dpll_bypass_vals;
+
+ /*
+ * Each set bit in the mask corresponds to a bypass value equal
+ * to the bitshift. Go through each set-bit in the mask and
+ * compare against the given register value.
+ */
+ while (mask) {
+ val = __ffs(mask);
+ mask ^= (1 << val);
+ if (v == val)
+ return 1;
+ }
+
+ return 0;
+}
+
/* Public functions */
u8 omap2_init_dpll_parent(struct clk_hw *hw)
{
@@ -201,20 +216,9 @@ u8 omap2_init_dpll_parent(struct clk_hw *hw)
v >>= __ffs(dd->enable_mask);
/* Reparent the struct clk in case the dpll is in bypass */
- if (cpu_is_omap24xx()) {
- if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
- v == OMAP2XXX_EN_DPLL_FRBYPASS)
- return 1;
- } else if (cpu_is_omap34xx()) {
- if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
- v == OMAP3XXX_EN_DPLL_FRBYPASS)
- return 1;
- } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx()) {
- if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
- v == OMAP4XXX_EN_DPLL_FRBYPASS ||
- v == OMAP4XXX_EN_DPLL_MNBYPASS)
- return 1;
- }
+ if (_omap2_dpll_is_in_bypass(v))
+ return 1;
+
return 0;
}
@@ -247,20 +251,8 @@ unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
v &= dd->enable_mask;
v >>= __ffs(dd->enable_mask);
- if (cpu_is_omap24xx()) {
- if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
- v == OMAP2XXX_EN_DPLL_FRBYPASS)
- return __clk_get_rate(dd->clk_bypass);
- } else if (cpu_is_omap34xx()) {
- if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
- v == OMAP3XXX_EN_DPLL_FRBYPASS)
- return __clk_get_rate(dd->clk_bypass);
- } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx()) {
- if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
- v == OMAP4XXX_EN_DPLL_FRBYPASS ||
- v == OMAP4XXX_EN_DPLL_MNBYPASS)
- return __clk_get_rate(dd->clk_bypass);
- }
+ if (_omap2_dpll_is_in_bypass(v))
+ return __clk_get_rate(dd->clk_bypass);
v = omap2_clk_readl(clk, dd->mult_div1_reg);
dpll_mult = v & dd->mult_mask;
diff --git a/arch/arm/mach-omap2/clkt_iclk.c b/arch/arm/mach-omap2/clkt_iclk.c
index 333f0a666171..55eb579aeae1 100644
--- a/arch/arm/mach-omap2/clkt_iclk.c
+++ b/arch/arm/mach-omap2/clkt_iclk.c
@@ -14,11 +14,11 @@
#include <linux/clk-provider.h>
#include <linux/io.h>
-
#include "clock.h"
-#include "clock2xxx.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
+
+/* Register offsets */
+#define CM_AUTOIDLE 0x30
+#define CM_ICLKEN 0x10
/* Private functions */
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 591581a66532..5a0cac93d9ec 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -47,6 +47,24 @@
u16 cpu_mask;
/*
+ * Clock features setup. Used instead of CPU type checks.
+ */
+struct ti_clk_features ti_clk_features;
+
+/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
+#define OMAP3430_DPLL_FINT_BAND1_MIN 750000
+#define OMAP3430_DPLL_FINT_BAND1_MAX 2100000
+#define OMAP3430_DPLL_FINT_BAND2_MIN 7500000
+#define OMAP3430_DPLL_FINT_BAND2_MAX 21000000
+
+/*
+ * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
+ * From device data manual section 4.3 "DPLL and DLL Specifications".
+ */
+#define OMAP3PLUS_DPLL_FINT_MIN 32000
+#define OMAP3PLUS_DPLL_FINT_MAX 52000000
+
+/*
* clkdm_control: if true, then when a clock is enabled in the
* hardware, its clockdomain will first be enabled; and when a clock
* is disabled in the hardware, its clockdomain will be disabled
@@ -287,13 +305,7 @@ void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
* 34xx reverses this, just to keep us on our toes
* AM35xx uses both, depending on the module.
*/
- if (cpu_is_omap24xx())
- *idlest_val = OMAP24XX_CM_IDLEST_VAL;
- else if (cpu_is_omap34xx())
- *idlest_val = OMAP34XX_CM_IDLEST_VAL;
- else
- BUG();
-
+ *idlest_val = ti_clk_features.cm_idlest_val;
}
/**
@@ -731,3 +743,53 @@ void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
(clk_get_rate(core_ck) / 1000000),
(clk_get_rate(mpu_ck) / 1000000));
}
+
+/**
+ * ti_clk_init_features - init clock features struct for the SoC
+ *
+ * Initializes the clock features struct based on the SoC type.
+ */
+void __init ti_clk_init_features(void)
+{
+ /* Fint setup for DPLLs */
+ if (cpu_is_omap3430()) {
+ ti_clk_features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
+ ti_clk_features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
+ ti_clk_features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
+ ti_clk_features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
+ } else {
+ ti_clk_features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
+ ti_clk_features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
+ }
+
+ /* Bypass value setup for DPLLs */
+ if (cpu_is_omap24xx()) {
+ ti_clk_features.dpll_bypass_vals |=
+ (1 << OMAP2XXX_EN_DPLL_LPBYPASS) |
+ (1 << OMAP2XXX_EN_DPLL_FRBYPASS);
+ } else if (cpu_is_omap34xx()) {
+ ti_clk_features.dpll_bypass_vals |=
+ (1 << OMAP3XXX_EN_DPLL_LPBYPASS) |
+ (1 << OMAP3XXX_EN_DPLL_FRBYPASS);
+ } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx() ||
+ soc_is_omap54xx() || soc_is_dra7xx()) {
+ ti_clk_features.dpll_bypass_vals |=
+ (1 << OMAP4XXX_EN_DPLL_LPBYPASS) |
+ (1 << OMAP4XXX_EN_DPLL_FRBYPASS) |
+ (1 << OMAP4XXX_EN_DPLL_MNBYPASS);
+ }
+
+ /* Jitter correction only available on OMAP343X */
+ if (cpu_is_omap343x())
+ ti_clk_features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
+
+ /* Idlest value for interface clocks.
+ * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
+ * 34xx reverses this, just to keep us on our toes
+ * AM35xx uses both, depending on the module.
+ */
+ if (cpu_is_omap24xx())
+ ti_clk_features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
+ else if (cpu_is_omap34xx())
+ ti_clk_features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 12f54d428d7c..0f100dc4e97f 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -101,31 +101,6 @@ struct clockdomain;
}; \
DEFINE_STRUCT_CLK(_name, _parent_names, _ops);
-#define DEFINE_CLK_OMAP_HSDIVIDER(_name, _parent_name, \
- _parent_ptr, _flags, \
- _clksel_reg, _clksel_mask) \
- static const struct clksel _name##_div[] = { \
- { \
- .parent = _parent_ptr, \
- .rates = div31_1to31_rates \
- }, \
- { .parent = NULL }, \
- }; \
- static struct clk _name; \
- static const char *_name##_parent_names[] = { \
- _parent_name, \
- }; \
- static struct clk_hw_omap _name##_hw = { \
- .hw = { \
- .clk = &_name, \
- }, \
- .clksel = _name##_div, \
- .clksel_reg = _clksel_reg, \
- .clksel_mask = _clksel_mask, \
- .ops = &clkhwops_omap4_dpllmx, \
- }; \
- DEFINE_STRUCT_CLK(_name, _name##_parent_names, omap_hsdivider_ops);
-
/* struct clksel_rate.flags possibilities */
#define RATE_IN_242X (1 << 0)
#define RATE_IN_243X (1 << 1)
@@ -248,6 +223,23 @@ void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg);
extern u16 cpu_mask;
+/*
+ * Clock features setup. Used instead of CPU type checks.
+ */
+struct ti_clk_features {
+ u32 flags;
+ long fint_min;
+ long fint_max;
+ long fint_band1_max;
+ long fint_band2_min;
+ u8 dpll_bypass_vals;
+ u8 cm_idlest_val;
+};
+
+#define TI_CLK_DPLL_HAS_FREQSEL (1 << 0)
+
+extern struct ti_clk_features ti_clk_features;
+
extern const struct clkops clkops_omap2_dflt_wait;
extern const struct clkops clkops_dummy;
extern const struct clkops clkops_omap2_dflt;
@@ -286,4 +278,6 @@ extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
extern void omap_clocks_register(struct omap_clk *oclks, int cnt);
+
+void __init ti_clk_init_features(void);
#endif
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 751f3549bf6f..f4796c002070 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -44,8 +44,7 @@ struct omap3_scratchpad {
};
struct omap3_scratchpad_prcm_block {
- u32 prm_clksrc_ctrl;
- u32 prm_clksel;
+ u32 prm_contents[2];
u32 cm_contents[11];
u32 prcm_block_size;
};
@@ -282,13 +281,9 @@ void omap3_clear_scratchpad_contents(void)
void __iomem *v_addr;
u32 offset = 0;
v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
- if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
- OMAP3430_GLOBAL_COLD_RST_MASK) {
+ if (omap3xxx_prm_clear_global_cold_reset()) {
for ( ; offset <= max_offset; offset += 0x4)
writel_relaxed(0x0, (v_addr + offset));
- omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
- OMAP3430_GR_MOD,
- OMAP3_PRM_RSTST_OFFSET);
}
}
@@ -331,13 +326,7 @@ void omap3_save_scratchpad_contents(void)
scratchpad_contents.sdrc_block_offset = 0x64;
/* Populate the PRCM block contents */
- prcm_block_contents.prm_clksrc_ctrl =
- omap2_prm_read_mod_reg(OMAP3430_GR_MOD,
- OMAP3_PRM_CLKSRC_CTRL_OFFSET);
- prcm_block_contents.prm_clksel =
- omap2_prm_read_mod_reg(OMAP3430_CCR_MOD,
- OMAP3_PRM_CLKSEL_OFFSET);
-
+ omap3_prm_save_scratchpad_contents(prcm_block_contents.prm_contents);
omap3_cm_save_scratchpad_contents(prcm_block_contents.cm_contents);
prcm_block_contents.prcm_block_size = 0x0;
@@ -575,9 +564,50 @@ int omap3_ctrl_save_padconf(void)
* Sets the bootmode for IVA2 to idle. This is needed by the PM code to
* force disable IVA2 so that it does not prevent any low-power states.
*/
-void omap3_ctrl_set_iva_bootmode_idle(void)
+static void __init omap3_ctrl_set_iva_bootmode_idle(void)
{
omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
OMAP343X_CONTROL_IVA2_BOOTMOD);
}
+
+/**
+ * omap3_ctrl_setup_d2d_padconf - setup stacked modem pads for idle
+ *
+ * Sets up the pads controlling the stacked modem in such way that the
+ * device can enter idle.
+ */
+static void __init omap3_ctrl_setup_d2d_padconf(void)
+{
+ u16 mask, padconf;
+
+ /*
+ * In a stand alone OMAP3430 where there is not a stacked
+ * modem for the D2D Idle Ack and D2D MStandby must be pulled
+ * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
+ * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up.
+ */
+ mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
+ padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
+ padconf |= mask;
+ omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
+
+ padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
+ padconf |= mask;
+ omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
+}
+
+/**
+ * omap3_ctrl_init - does static initializations for control module
+ *
+ * Initializes system control module. This sets up the sysconfig autoidle,
+ * and sets up modem and iva2 so that they can be idled properly.
+ */
+void __init omap3_ctrl_init(void)
+{
+ omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
+
+ omap3_ctrl_set_iva_bootmode_idle();
+
+ omap3_ctrl_setup_d2d_padconf();
+}
#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index da054801b114..a3c013345c45 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -16,11 +16,6 @@
#ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H
#define __ARCH_ARM_MACH_OMAP2_CONTROL_H
-#include "ctrl_module_core_44xx.h"
-#include "ctrl_module_wkup_44xx.h"
-#include "ctrl_module_pad_core_44xx.h"
-#include "ctrl_module_pad_wkup_44xx.h"
-
#include "am33xx.h"
#ifndef __ASSEMBLY__
@@ -254,6 +249,39 @@
/* TI81XX CONTROL_DEVCONF register offsets */
#define TI81XX_CONTROL_DEVICE_ID (TI81XX_CONTROL_DEVCONF + 0x000)
+/* OMAP4 CONTROL MODULE */
+#define OMAP4_CTRL_MODULE_PAD_WKUP 0x4a31e000
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2 0x0604
+#define OMAP4_CTRL_MODULE_CORE_STATUS 0x02c4
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1 0x0218
+#define OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR 0x0304
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY 0x0618
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX 0x0608
+
+/* OMAP4 CONTROL_DSIPHY */
+#define OMAP4_DSI2_LANEENABLE_SHIFT 29
+#define OMAP4_DSI2_LANEENABLE_MASK (0x7 << 29)
+#define OMAP4_DSI1_LANEENABLE_SHIFT 24
+#define OMAP4_DSI1_LANEENABLE_MASK (0x1f << 24)
+#define OMAP4_DSI1_PIPD_SHIFT 19
+#define OMAP4_DSI1_PIPD_MASK (0x1f << 19)
+#define OMAP4_DSI2_PIPD_SHIFT 14
+#define OMAP4_DSI2_PIPD_MASK (0x1f << 14)
+
+/* OMAP4 CONTROL_CAMERA_RX */
+#define OMAP4_CAMERARX_CSI21_LANEENABLE_SHIFT 24
+#define OMAP4_CAMERARX_CSI21_LANEENABLE_MASK (0x1f << 24)
+#define OMAP4_CAMERARX_CSI22_LANEENABLE_SHIFT 29
+#define OMAP4_CAMERARX_CSI22_LANEENABLE_MASK (0x3 << 29)
+#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_SHIFT 21
+#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_MASK (1 << 21)
+#define OMAP4_CAMERARX_CSI22_CAMMODE_SHIFT 19
+#define OMAP4_CAMERARX_CSI22_CAMMODE_MASK (0x3 << 19)
+#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_SHIFT 18
+#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_MASK (1 << 18)
+#define OMAP4_CAMERARX_CSI21_CAMMODE_SHIFT 16
+#define OMAP4_CAMERARX_CSI21_CAMMODE_MASK (0x3 << 16)
+
/* OMAP54XX CONTROL STATUS register */
#define OMAP5XXX_CONTROL_STATUS 0x134
#define OMAP5_DEVICETYPE_MASK (0x7 << 6)
@@ -427,7 +455,7 @@ extern void omap_ctrl_write_dsp_boot_addr(u32 bootaddr);
extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode);
extern void omap3630_ctrl_disable_rta(void);
extern int omap3_ctrl_save_padconf(void);
-extern void omap3_ctrl_set_iva_bootmode_idle(void);
+void omap3_ctrl_init(void);
extern void omap2_set_globals_control(void __iomem *ctrl,
void __iomem *ctrl_pad);
#else
diff --git a/arch/arm/mach-omap2/ctrl_module_core_44xx.h b/arch/arm/mach-omap2/ctrl_module_core_44xx.h
deleted file mode 100644
index 01970824e0e5..000000000000
--- a/arch/arm/mach-omap2/ctrl_module_core_44xx.h
+++ /dev/null
@@ -1,392 +0,0 @@
-/*
- * OMAP44xx CTRL_MODULE_CORE registers and bitfields
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_CORE_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_CORE_44XX_H
-
-
-/* Base address */
-#define OMAP4_CTRL_MODULE_CORE 0x4a002000
-
-/* Registers offset */
-#define OMAP4_CTRL_MODULE_CORE_IP_REVISION 0x0000
-#define OMAP4_CTRL_MODULE_CORE_IP_HWINFO 0x0004
-#define OMAP4_CTRL_MODULE_CORE_IP_SYSCONFIG 0x0010
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_0 0x0200
-#define OMAP4_CTRL_MODULE_CORE_ID_CODE 0x0204
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_1 0x0208
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_2 0x020c
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_3 0x0210
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_0 0x0214
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1 0x0218
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_USB_CONF 0x021c
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_VDD_WKUP 0x0228
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_BGAP 0x0260
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_0 0x0264
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_1 0x0268
-#define OMAP4_CTRL_MODULE_CORE_STATUS 0x02c4
-#define OMAP4_CTRL_MODULE_CORE_DEV_CONF 0x0300
-#define OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR 0x0304
-#define OMAP4_CTRL_MODULE_CORE_LDOVBB_IVA_VOLTAGE_CTRL 0x0314
-#define OMAP4_CTRL_MODULE_CORE_LDOVBB_MPU_VOLTAGE_CTRL 0x0318
-#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_IVA_VOLTAGE_CTRL 0x0320
-#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_MPU_VOLTAGE_CTRL 0x0324
-#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_CORE_VOLTAGE_CTRL 0x0328
-#define OMAP4_CTRL_MODULE_CORE_TEMP_SENSOR 0x032c
-#define OMAP4_CTRL_MODULE_CORE_DPLL_NWELL_TRIM_0 0x0330
-#define OMAP4_CTRL_MODULE_CORE_DPLL_NWELL_TRIM_1 0x0334
-#define OMAP4_CTRL_MODULE_CORE_USBOTGHS_CONTROL 0x033c
-#define OMAP4_CTRL_MODULE_CORE_DSS_CONTROL 0x0340
-#define OMAP4_CTRL_MODULE_CORE_HWOBS_CONTROL 0x0350
-#define OMAP4_CTRL_MODULE_CORE_DEBOBS_FINAL_MUX_SEL 0x0400
-#define OMAP4_CTRL_MODULE_CORE_DEBOBS_MMR_MPU 0x0408
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL0 0x042c
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL1 0x0430
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL2 0x0434
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL3 0x0438
-#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL0 0x0440
-#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL1 0x0444
-#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL2 0x0448
-#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_FREQLOCK_SEL 0x044c
-#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_TINITZ_SEL 0x0450
-#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_PHASELOCK_SEL 0x0454
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_0 0x0480
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_1 0x0484
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_2 0x0488
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_3 0x048c
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_4 0x0490
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_5 0x0494
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_6 0x0498
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_7 0x049c
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_8 0x04a0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_9 0x04a4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_10 0x04a8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_11 0x04ac
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_12 0x04b0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_13 0x04b4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_14 0x04b8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_15 0x04bc
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_16 0x04c0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_17 0x04c4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_18 0x04c8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_19 0x04cc
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_20 0x04d0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_21 0x04d4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_22 0x04d8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_23 0x04dc
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_24 0x04e0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_25 0x04e4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_26 0x04e8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_27 0x04ec
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_28 0x04f0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_29 0x04f4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_30 0x04f8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_31 0x04fc
-
-/* Registers shifts and masks */
-
-/* IP_REVISION */
-#define OMAP4_IP_REV_SCHEME_SHIFT 30
-#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30)
-#define OMAP4_IP_REV_FUNC_SHIFT 16
-#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16)
-#define OMAP4_IP_REV_RTL_SHIFT 11
-#define OMAP4_IP_REV_RTL_MASK (0x1f << 11)
-#define OMAP4_IP_REV_MAJOR_SHIFT 8
-#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8)
-#define OMAP4_IP_REV_CUSTOM_SHIFT 6
-#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6)
-#define OMAP4_IP_REV_MINOR_SHIFT 0
-#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0)
-
-/* IP_HWINFO */
-#define OMAP4_IP_HWINFO_SHIFT 0
-#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0)
-
-/* IP_SYSCONFIG */
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2)
-
-/* STD_FUSE_DIE_ID_0 */
-#define OMAP4_STD_FUSE_DIE_ID_0_SHIFT 0
-#define OMAP4_STD_FUSE_DIE_ID_0_MASK (0xffffffff << 0)
-
-/* ID_CODE */
-#define OMAP4_STD_FUSE_IDCODE_SHIFT 0
-#define OMAP4_STD_FUSE_IDCODE_MASK (0xffffffff << 0)
-
-/* STD_FUSE_DIE_ID_1 */
-#define OMAP4_STD_FUSE_DIE_ID_1_SHIFT 0
-#define OMAP4_STD_FUSE_DIE_ID_1_MASK (0xffffffff << 0)
-
-/* STD_FUSE_DIE_ID_2 */
-#define OMAP4_STD_FUSE_DIE_ID_2_SHIFT 0
-#define OMAP4_STD_FUSE_DIE_ID_2_MASK (0xffffffff << 0)
-
-/* STD_FUSE_DIE_ID_3 */
-#define OMAP4_STD_FUSE_DIE_ID_3_SHIFT 0
-#define OMAP4_STD_FUSE_DIE_ID_3_MASK (0xffffffff << 0)
-
-/* STD_FUSE_PROD_ID_0 */
-#define OMAP4_STD_FUSE_PROD_ID_0_SHIFT 0
-#define OMAP4_STD_FUSE_PROD_ID_0_MASK (0xffffffff << 0)
-
-/* STD_FUSE_PROD_ID_1 */
-#define OMAP4_STD_FUSE_PROD_ID_1_SHIFT 0
-#define OMAP4_STD_FUSE_PROD_ID_1_MASK (0xffffffff << 0)
-
-/* STD_FUSE_USB_CONF */
-#define OMAP4_USB_PROD_ID_SHIFT 16
-#define OMAP4_USB_PROD_ID_MASK (0xffff << 16)
-#define OMAP4_USB_VENDOR_ID_SHIFT 0
-#define OMAP4_USB_VENDOR_ID_MASK (0xffff << 0)
-
-/* STD_FUSE_OPP_VDD_WKUP */
-#define OMAP4_STD_FUSE_OPP_VDD_WKUP_SHIFT 0
-#define OMAP4_STD_FUSE_OPP_VDD_WKUP_MASK (0xffffffff << 0)
-
-/* STD_FUSE_OPP_BGAP */
-#define OMAP4_STD_FUSE_OPP_BGAP_SHIFT 0
-#define OMAP4_STD_FUSE_OPP_BGAP_MASK (0xffffffff << 0)
-
-/* STD_FUSE_OPP_DPLL_0 */
-#define OMAP4_STD_FUSE_OPP_DPLL_0_SHIFT 0
-#define OMAP4_STD_FUSE_OPP_DPLL_0_MASK (0xffffffff << 0)
-
-/* STD_FUSE_OPP_DPLL_1 */
-#define OMAP4_STD_FUSE_OPP_DPLL_1_SHIFT 0
-#define OMAP4_STD_FUSE_OPP_DPLL_1_MASK (0xffffffff << 0)
-
-/* STATUS */
-#define OMAP4_ATTILA_CONF_SHIFT 11
-#define OMAP4_ATTILA_CONF_MASK (0x3 << 11)
-#define OMAP4_DEVICE_TYPE_SHIFT 8
-#define OMAP4_DEVICE_TYPE_MASK (0x7 << 8)
-#define OMAP4_SYS_BOOT_SHIFT 0
-#define OMAP4_SYS_BOOT_MASK (0xff << 0)
-
-/* DEV_CONF */
-#define OMAP4_DEV_CONF_SHIFT 1
-#define OMAP4_DEV_CONF_MASK (0x7fffffff << 1)
-#define OMAP4_USBPHY_PD_SHIFT 0
-#define OMAP4_USBPHY_PD_MASK (1 << 0)
-
-/* LDOVBB_IVA_VOLTAGE_CTRL */
-#define OMAP4_LDOVBBIVA_RBB_MUX_CTRL_SHIFT 26
-#define OMAP4_LDOVBBIVA_RBB_MUX_CTRL_MASK (1 << 26)
-#define OMAP4_LDOVBBIVA_RBB_VSET_IN_SHIFT 21
-#define OMAP4_LDOVBBIVA_RBB_VSET_IN_MASK (0x1f << 21)
-#define OMAP4_LDOVBBIVA_RBB_VSET_OUT_SHIFT 16
-#define OMAP4_LDOVBBIVA_RBB_VSET_OUT_MASK (0x1f << 16)
-#define OMAP4_LDOVBBIVA_FBB_MUX_CTRL_SHIFT 10
-#define OMAP4_LDOVBBIVA_FBB_MUX_CTRL_MASK (1 << 10)
-#define OMAP4_LDOVBBIVA_FBB_VSET_IN_SHIFT 5
-#define OMAP4_LDOVBBIVA_FBB_VSET_IN_MASK (0x1f << 5)
-#define OMAP4_LDOVBBIVA_FBB_VSET_OUT_SHIFT 0
-#define OMAP4_LDOVBBIVA_FBB_VSET_OUT_MASK (0x1f << 0)
-
-/* LDOVBB_MPU_VOLTAGE_CTRL */
-#define OMAP4_LDOVBBMPU_RBB_MUX_CTRL_SHIFT 26
-#define OMAP4_LDOVBBMPU_RBB_MUX_CTRL_MASK (1 << 26)
-#define OMAP4_LDOVBBMPU_RBB_VSET_IN_SHIFT 21
-#define OMAP4_LDOVBBMPU_RBB_VSET_IN_MASK (0x1f << 21)
-#define OMAP4_LDOVBBMPU_RBB_VSET_OUT_SHIFT 16
-#define OMAP4_LDOVBBMPU_RBB_VSET_OUT_MASK (0x1f << 16)
-#define OMAP4_LDOVBBMPU_FBB_MUX_CTRL_SHIFT 10
-#define OMAP4_LDOVBBMPU_FBB_MUX_CTRL_MASK (1 << 10)
-#define OMAP4_LDOVBBMPU_FBB_VSET_IN_SHIFT 5
-#define OMAP4_LDOVBBMPU_FBB_VSET_IN_MASK (0x1f << 5)
-#define OMAP4_LDOVBBMPU_FBB_VSET_OUT_SHIFT 0
-#define OMAP4_LDOVBBMPU_FBB_VSET_OUT_MASK (0x1f << 0)
-
-/* LDOSRAM_IVA_VOLTAGE_CTRL */
-#define OMAP4_LDOSRAMIVA_RETMODE_MUX_CTRL_SHIFT 26
-#define OMAP4_LDOSRAMIVA_RETMODE_MUX_CTRL_MASK (1 << 26)
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_IN_SHIFT 21
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_IN_MASK (0x1f << 21)
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_OUT_SHIFT 16
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_OUT_MASK (0x1f << 16)
-#define OMAP4_LDOSRAMIVA_ACTMODE_MUX_CTRL_SHIFT 10
-#define OMAP4_LDOSRAMIVA_ACTMODE_MUX_CTRL_MASK (1 << 10)
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_IN_SHIFT 5
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_IN_MASK (0x1f << 5)
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_OUT_SHIFT 0
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_OUT_MASK (0x1f << 0)
-
-/* LDOSRAM_MPU_VOLTAGE_CTRL */
-#define OMAP4_LDOSRAMMPU_RETMODE_MUX_CTRL_SHIFT 26
-#define OMAP4_LDOSRAMMPU_RETMODE_MUX_CTRL_MASK (1 << 26)
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_IN_SHIFT 21
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_IN_MASK (0x1f << 21)
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_OUT_SHIFT 16
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_OUT_MASK (0x1f << 16)
-#define OMAP4_LDOSRAMMPU_ACTMODE_MUX_CTRL_SHIFT 10
-#define OMAP4_LDOSRAMMPU_ACTMODE_MUX_CTRL_MASK (1 << 10)
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_IN_SHIFT 5
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_IN_MASK (0x1f << 5)
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_OUT_SHIFT 0
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_OUT_MASK (0x1f << 0)
-
-/* LDOSRAM_CORE_VOLTAGE_CTRL */
-#define OMAP4_LDOSRAMCORE_RETMODE_MUX_CTRL_SHIFT 26
-#define OMAP4_LDOSRAMCORE_RETMODE_MUX_CTRL_MASK (1 << 26)
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_IN_SHIFT 21
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_IN_MASK (0x1f << 21)
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_OUT_SHIFT 16
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_OUT_MASK (0x1f << 16)
-#define OMAP4_LDOSRAMCORE_ACTMODE_MUX_CTRL_SHIFT 10
-#define OMAP4_LDOSRAMCORE_ACTMODE_MUX_CTRL_MASK (1 << 10)
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_IN_SHIFT 5
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_IN_MASK (0x1f << 5)
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_OUT_SHIFT 0
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_OUT_MASK (0x1f << 0)
-
-/* TEMP_SENSOR */
-#define OMAP4_BGAP_TEMPSOFF_SHIFT 12
-#define OMAP4_BGAP_TEMPSOFF_MASK (1 << 12)
-#define OMAP4_BGAP_TSHUT_SHIFT 11
-#define OMAP4_BGAP_TSHUT_MASK (1 << 11)
-#define OMAP4_BGAP_TEMP_SENSOR_CONTCONV_SHIFT 10
-#define OMAP4_BGAP_TEMP_SENSOR_CONTCONV_MASK (1 << 10)
-#define OMAP4_BGAP_TEMP_SENSOR_SOC_SHIFT 9
-#define OMAP4_BGAP_TEMP_SENSOR_SOC_MASK (1 << 9)
-#define OMAP4_BGAP_TEMP_SENSOR_EOCZ_SHIFT 8
-#define OMAP4_BGAP_TEMP_SENSOR_EOCZ_MASK (1 << 8)
-#define OMAP4_BGAP_TEMP_SENSOR_DTEMP_SHIFT 0
-#define OMAP4_BGAP_TEMP_SENSOR_DTEMP_MASK (0xff << 0)
-
-/* DPLL_NWELL_TRIM_0 */
-#define OMAP4_DPLL_ABE_NWELL_TRIM_MUX_CTRL_SHIFT 29
-#define OMAP4_DPLL_ABE_NWELL_TRIM_MUX_CTRL_MASK (1 << 29)
-#define OMAP4_DPLL_ABE_NWELL_TRIM_SHIFT 24
-#define OMAP4_DPLL_ABE_NWELL_TRIM_MASK (0x1f << 24)
-#define OMAP4_DPLL_PER_NWELL_TRIM_MUX_CTRL_SHIFT 23
-#define OMAP4_DPLL_PER_NWELL_TRIM_MUX_CTRL_MASK (1 << 23)
-#define OMAP4_DPLL_PER_NWELL_TRIM_SHIFT 18
-#define OMAP4_DPLL_PER_NWELL_TRIM_MASK (0x1f << 18)
-#define OMAP4_DPLL_CORE_NWELL_TRIM_MUX_CTRL_SHIFT 17
-#define OMAP4_DPLL_CORE_NWELL_TRIM_MUX_CTRL_MASK (1 << 17)
-#define OMAP4_DPLL_CORE_NWELL_TRIM_SHIFT 12
-#define OMAP4_DPLL_CORE_NWELL_TRIM_MASK (0x1f << 12)
-#define OMAP4_DPLL_IVA_NWELL_TRIM_MUX_CTRL_SHIFT 11
-#define OMAP4_DPLL_IVA_NWELL_TRIM_MUX_CTRL_MASK (1 << 11)
-#define OMAP4_DPLL_IVA_NWELL_TRIM_SHIFT 6
-#define OMAP4_DPLL_IVA_NWELL_TRIM_MASK (0x1f << 6)
-#define OMAP4_DPLL_MPU_NWELL_TRIM_MUX_CTRL_SHIFT 5
-#define OMAP4_DPLL_MPU_NWELL_TRIM_MUX_CTRL_MASK (1 << 5)
-#define OMAP4_DPLL_MPU_NWELL_TRIM_SHIFT 0
-#define OMAP4_DPLL_MPU_NWELL_TRIM_MASK (0x1f << 0)
-
-/* DPLL_NWELL_TRIM_1 */
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MUX_CTRL_SHIFT 29
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MUX_CTRL_MASK (1 << 29)
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_SHIFT 24
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MASK (0x1f << 24)
-#define OMAP4_DPLL_USB_NWELL_TRIM_MUX_CTRL_SHIFT 23
-#define OMAP4_DPLL_USB_NWELL_TRIM_MUX_CTRL_MASK (1 << 23)
-#define OMAP4_DPLL_USB_NWELL_TRIM_SHIFT 18
-#define OMAP4_DPLL_USB_NWELL_TRIM_MASK (0x1f << 18)
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_MUX_CTRL_SHIFT 17
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_MUX_CTRL_MASK (1 << 17)
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_SHIFT 12
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_MASK (0x1f << 12)
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_MUX_CTRL_SHIFT 11
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_MUX_CTRL_MASK (1 << 11)
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_SHIFT 6
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_MASK (0x1f << 6)
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_MUX_CTRL_SHIFT 5
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_MUX_CTRL_MASK (1 << 5)
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_SHIFT 0
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_MASK (0x1f << 0)
-
-/* USBOTGHS_CONTROL */
-#define OMAP4_DISCHRGVBUS_SHIFT 8
-#define OMAP4_DISCHRGVBUS_MASK (1 << 8)
-#define OMAP4_CHRGVBUS_SHIFT 7
-#define OMAP4_CHRGVBUS_MASK (1 << 7)
-#define OMAP4_DRVVBUS_SHIFT 6
-#define OMAP4_DRVVBUS_MASK (1 << 6)
-#define OMAP4_IDPULLUP_SHIFT 5
-#define OMAP4_IDPULLUP_MASK (1 << 5)
-#define OMAP4_IDDIG_SHIFT 4
-#define OMAP4_IDDIG_MASK (1 << 4)
-#define OMAP4_SESSEND_SHIFT 3
-#define OMAP4_SESSEND_MASK (1 << 3)
-#define OMAP4_VBUSVALID_SHIFT 2
-#define OMAP4_VBUSVALID_MASK (1 << 2)
-#define OMAP4_BVALID_SHIFT 1
-#define OMAP4_BVALID_MASK (1 << 1)
-#define OMAP4_AVALID_SHIFT 0
-#define OMAP4_AVALID_MASK (1 << 0)
-
-/* DSS_CONTROL */
-#define OMAP4_DSS_MUX6_SELECT_SHIFT 0
-#define OMAP4_DSS_MUX6_SELECT_MASK (1 << 0)
-
-/* HWOBS_CONTROL */
-#define OMAP4_HWOBS_CLKDIV_SEL_SHIFT 3
-#define OMAP4_HWOBS_CLKDIV_SEL_MASK (0x1f << 3)
-#define OMAP4_HWOBS_ALL_ZERO_MODE_SHIFT 2
-#define OMAP4_HWOBS_ALL_ZERO_MODE_MASK (1 << 2)
-#define OMAP4_HWOBS_ALL_ONE_MODE_SHIFT 1
-#define OMAP4_HWOBS_ALL_ONE_MODE_MASK (1 << 1)
-#define OMAP4_HWOBS_MACRO_ENABLE_SHIFT 0
-#define OMAP4_HWOBS_MACRO_ENABLE_MASK (1 << 0)
-
-/* DEBOBS_FINAL_MUX_SEL */
-#define OMAP4_SELECT_SHIFT 0
-#define OMAP4_SELECT_MASK (0xffffffff << 0)
-
-/* DEBOBS_MMR_MPU */
-#define OMAP4_SELECT_DEBOBS_MMR_MPU_SHIFT 0
-#define OMAP4_SELECT_DEBOBS_MMR_MPU_MASK (0xf << 0)
-
-/* CONF_SDMA_REQ_SEL0 */
-#define OMAP4_MULT_SHIFT 0
-#define OMAP4_MULT_MASK (0x7f << 0)
-
-/* CONF_CLK_SEL0 */
-#define OMAP4_MULT_CONF_CLK_SEL0_SHIFT 0
-#define OMAP4_MULT_CONF_CLK_SEL0_MASK (0x7 << 0)
-
-/* CONF_CLK_SEL1 */
-#define OMAP4_MULT_CONF_CLK_SEL1_SHIFT 0
-#define OMAP4_MULT_CONF_CLK_SEL1_MASK (0x7 << 0)
-
-/* CONF_CLK_SEL2 */
-#define OMAP4_MULT_CONF_CLK_SEL2_SHIFT 0
-#define OMAP4_MULT_CONF_CLK_SEL2_MASK (0x7 << 0)
-
-/* CONF_DPLL_FREQLOCK_SEL */
-#define OMAP4_MULT_CONF_DPLL_FREQLOCK_SEL_SHIFT 0
-#define OMAP4_MULT_CONF_DPLL_FREQLOCK_SEL_MASK (0x7 << 0)
-
-/* CONF_DPLL_TINITZ_SEL */
-#define OMAP4_MULT_CONF_DPLL_TINITZ_SEL_SHIFT 0
-#define OMAP4_MULT_CONF_DPLL_TINITZ_SEL_MASK (0x7 << 0)
-
-/* CONF_DPLL_PHASELOCK_SEL */
-#define OMAP4_MULT_CONF_DPLL_PHASELOCK_SEL_SHIFT 0
-#define OMAP4_MULT_CONF_DPLL_PHASELOCK_SEL_MASK (0x7 << 0)
-
-/* CONF_DEBUG_SEL_TST_0 */
-#define OMAP4_MODE_SHIFT 0
-#define OMAP4_MODE_MASK (0xf << 0)
-
-#endif
diff --git a/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h
deleted file mode 100644
index c88420de1151..000000000000
--- a/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h
+++ /dev/null
@@ -1,1409 +0,0 @@
-/*
- * OMAP44xx CTRL_MODULE_PAD_CORE registers and bitfields
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_CORE_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_CORE_44XX_H
-
-
-/* Base address */
-#define OMAP4_CTRL_MODULE_PAD_CORE 0x4a100000
-
-/* Registers offset */
-#define OMAP4_CTRL_MODULE_PAD_CORE_IP_REVISION 0x0000
-#define OMAP4_CTRL_MODULE_PAD_CORE_IP_HWINFO 0x0004
-#define OMAP4_CTRL_MODULE_PAD_CORE_IP_SYSCONFIG 0x0010
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_0 0x01d8
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_1 0x01dc
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_2 0x01e0
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_3 0x01e4
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_4 0x01e8
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_5 0x01ec
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_6 0x01f0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PADCONF_GLOBAL 0x05a0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PADCONF_MODE 0x05a4
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART1IO_PADCONF_0 0x05a8
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART1IO_PADCONF_1 0x05ac
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_0 0x05b0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_1 0x05b4
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_0 0x05b8
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_1 0x05bc
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_2 0x05c0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USBB_HSIC 0x05c4
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SLIMBUS 0x05c8
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE 0x0600
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_0 0x0604
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX 0x0608
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_AVDAC 0x060c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HDMI_TX_PHY 0x0610
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC2 0x0614
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY 0x0618
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP 0x061c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USB2PHYCORE 0x0620
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1 0x0624
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC1 0x0628
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HSI 0x062c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USB 0x0630
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HDQ 0x0634
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_0 0x0638
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_1 0x063c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_2 0x0640
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_3 0x0644
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_0 0x0648
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_1 0x064c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_2 0x0650
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_3 0x0654
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_BUS_HOLD 0x0658
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_C2C 0x065c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_RW 0x0660
-#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_R 0x0664
-#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_R_C0 0x0668
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_1 0x0700
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_2 0x0704
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_3 0x0708
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_4 0x070c
-
-/* Registers shifts and masks */
-
-/* IP_REVISION */
-#define OMAP4_IP_REV_SCHEME_SHIFT 30
-#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30)
-#define OMAP4_IP_REV_FUNC_SHIFT 16
-#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16)
-#define OMAP4_IP_REV_RTL_SHIFT 11
-#define OMAP4_IP_REV_RTL_MASK (0x1f << 11)
-#define OMAP4_IP_REV_MAJOR_SHIFT 8
-#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8)
-#define OMAP4_IP_REV_CUSTOM_SHIFT 6
-#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6)
-#define OMAP4_IP_REV_MINOR_SHIFT 0
-#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0)
-
-/* IP_HWINFO */
-#define OMAP4_IP_HWINFO_SHIFT 0
-#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0)
-
-/* IP_SYSCONFIG */
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2)
-
-/* PADCONF_WAKEUPEVENT_0 */
-#define OMAP4_GPMC_CLK_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_GPMC_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_GPMC_NWP_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_GPMC_NWP_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_GPMC_NCS3_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_GPMC_NCS3_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_GPMC_NCS2_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_GPMC_NCS2_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_GPMC_NCS1_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_GPMC_NCS1_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_GPMC_NCS0_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_GPMC_NCS0_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_GPMC_A25_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_GPMC_A25_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_GPMC_A24_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_GPMC_A24_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_GPMC_A23_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_GPMC_A23_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_GPMC_A22_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_GPMC_A22_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_GPMC_A21_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_GPMC_A21_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_GPMC_A20_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_GPMC_A20_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_GPMC_A19_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_GPMC_A19_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_GPMC_A18_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_GPMC_A18_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_GPMC_A17_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_GPMC_A17_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_GPMC_A16_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_GPMC_A16_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_GPMC_AD15_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_GPMC_AD15_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_GPMC_AD14_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_GPMC_AD14_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_GPMC_AD13_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_GPMC_AD13_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_GPMC_AD12_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_GPMC_AD12_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_GPMC_AD11_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_GPMC_AD11_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_GPMC_AD10_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_GPMC_AD10_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_GPMC_AD9_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_GPMC_AD9_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_GPMC_AD8_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_GPMC_AD8_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_GPMC_AD7_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_GPMC_AD7_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_GPMC_AD6_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_GPMC_AD6_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_GPMC_AD5_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_GPMC_AD5_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_GPMC_AD4_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_GPMC_AD4_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_GPMC_AD3_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_GPMC_AD3_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_GPMC_AD2_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_GPMC_AD2_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_GPMC_AD1_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_GPMC_AD1_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_GPMC_AD0_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_GPMC_AD0_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_1 */
-#define OMAP4_CAM_STROBE_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_CAM_STROBE_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_CAM_SHUTTER_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_CAM_SHUTTER_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_CSI22_DY1_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_CSI22_DY1_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_CSI22_DX1_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_CSI22_DX1_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_CSI22_DY0_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_CSI22_DY0_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_CSI22_DX0_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_CSI22_DX0_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_CSI21_DY4_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_CSI21_DY4_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_CSI21_DX4_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_CSI21_DX4_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_CSI21_DY3_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_CSI21_DY3_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_CSI21_DX3_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_CSI21_DX3_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_CSI21_DY2_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_CSI21_DY2_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_CSI21_DX2_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_CSI21_DX2_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_CSI21_DY1_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_CSI21_DY1_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_CSI21_DX1_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_CSI21_DX1_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_CSI21_DY0_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_CSI21_DY0_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_CSI21_DX0_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_CSI21_DX0_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_HDMI_DDC_SDA_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_HDMI_DDC_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_HDMI_DDC_SCL_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_HDMI_DDC_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_HDMI_CEC_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_HDMI_CEC_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_HDMI_HPD_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_HDMI_HPD_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_C2C_DATA15_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_C2C_DATA15_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_C2C_DATA14_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_C2C_DATA14_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_C2C_DATA13_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_C2C_DATA13_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_C2C_DATA12_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_C2C_DATA12_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_C2C_DATA11_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_C2C_DATA11_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_GPMC_WAIT1_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_GPMC_WAIT1_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_GPMC_WAIT0_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_GPMC_WAIT0_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_GPMC_NBE1_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_GPMC_NBE1_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_GPMC_NBE0_CLE_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_GPMC_NBE0_CLE_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_GPMC_NWE_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_GPMC_NWE_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_GPMC_NOE_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_GPMC_NOE_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_GPMC_NADV_ALE_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_GPMC_NADV_ALE_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_2 */
-#define OMAP4_ABE_MCBSP1_CLKX_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_ABE_MCBSP1_CLKX_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_ABE_MCBSP2_FSX_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_ABE_MCBSP2_FSX_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_ABE_MCBSP2_DX_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_ABE_MCBSP2_DX_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_ABE_MCBSP2_DR_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_ABE_MCBSP2_DR_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_ABE_MCBSP2_CLKX_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_ABE_MCBSP2_CLKX_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_SDMMC1_DAT7_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_SDMMC1_DAT7_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_SDMMC1_DAT6_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_SDMMC1_DAT6_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_SDMMC1_DAT5_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_SDMMC1_DAT5_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_SDMMC1_DAT4_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_SDMMC1_DAT4_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_SDMMC1_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_SDMMC1_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_SDMMC1_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_SDMMC1_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_SDMMC1_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_SDMMC1_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_SDMMC1_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_SDMMC1_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_SDMMC1_CMD_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_SDMMC1_CMD_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_SDMMC1_CLK_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_SDMMC1_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_USBC1_ICUSB_DM_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_USBC1_ICUSB_DM_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_USBC1_ICUSB_DP_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_USBC1_ICUSB_DP_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_USBB1_HSIC_STROBE_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_USBB1_HSIC_STROBE_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_USBB1_HSIC_DATA_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_USBB1_HSIC_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_USBB1_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_USBB1_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_USBB1_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_USBB1_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_USBB1_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_USBB1_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_USBB1_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_USBB1_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_USBB1_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_USBB1_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_USBB1_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_USBB1_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_USBB1_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_USBB1_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_USBB1_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_USBB1_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_USBB1_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_USBB1_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_USBB1_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_USBB1_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_USBB1_ULPITLL_STP_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_USBB1_ULPITLL_STP_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_USBB1_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_USBB1_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_CAM_GLOBALRESET_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_CAM_GLOBALRESET_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_3 */
-#define OMAP4_MCSPI1_CS3_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_MCSPI1_CS3_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_MCSPI1_CS2_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_MCSPI1_CS2_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_MCSPI1_CS1_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_MCSPI1_CS1_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_MCSPI1_CS0_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_MCSPI1_CS0_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_MCSPI1_SIMO_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_MCSPI1_SIMO_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_MCSPI1_SOMI_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_MCSPI1_SOMI_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_MCSPI1_CLK_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_MCSPI1_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_I2C4_SDA_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_I2C4_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_I2C4_SCL_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_I2C4_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_I2C3_SDA_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_I2C3_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_I2C3_SCL_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_I2C3_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_I2C2_SDA_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_I2C2_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_I2C2_SCL_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_I2C2_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_I2C1_SDA_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_I2C1_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_I2C1_SCL_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_I2C1_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_HDQ_SIO_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_HDQ_SIO_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_UART2_TX_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_UART2_TX_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_UART2_RX_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_UART2_RX_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_UART2_RTS_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_UART2_RTS_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_UART2_CTS_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_UART2_CTS_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_ABE_DMIC_DIN3_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_ABE_DMIC_DIN3_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_ABE_DMIC_DIN2_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_ABE_DMIC_DIN2_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_ABE_DMIC_DIN1_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_ABE_DMIC_DIN1_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_ABE_DMIC_CLK1_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_ABE_DMIC_CLK1_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_ABE_CLKS_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_ABE_CLKS_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_ABE_PDM_LB_CLK_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_ABE_PDM_LB_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_ABE_PDM_FRAME_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_ABE_PDM_FRAME_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_ABE_PDM_DL_DATA_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_ABE_PDM_DL_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_ABE_PDM_UL_DATA_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_ABE_PDM_UL_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_ABE_MCBSP1_FSX_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_ABE_MCBSP1_FSX_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_ABE_MCBSP1_DX_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_ABE_MCBSP1_DX_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_ABE_MCBSP1_DR_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_ABE_MCBSP1_DR_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_4 */
-#define OMAP4_UNIPRO_TY0_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_UNIPRO_TY0_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_UNIPRO_TX0_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_UNIPRO_TX0_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_USBB2_HSIC_STROBE_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_USBB2_HSIC_STROBE_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_USBB2_HSIC_DATA_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_USBB2_HSIC_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_USBB2_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_USBB2_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_USBB2_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_USBB2_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_USBB2_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_USBB2_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_USBB2_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_USBB2_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_USBB2_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_USBB2_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_USBB2_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_USBB2_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_USBB2_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_USBB2_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_USBB2_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_USBB2_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_USBB2_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_USBB2_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_USBB2_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_USBB2_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_USBB2_ULPITLL_STP_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_USBB2_ULPITLL_STP_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_USBB2_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_USBB2_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_UART4_TX_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_UART4_TX_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_UART4_RX_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_UART4_RX_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_MCSPI4_CS0_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_MCSPI4_CS0_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_MCSPI4_SOMI_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_MCSPI4_SOMI_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_MCSPI4_SIMO_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_MCSPI4_SIMO_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_MCSPI4_CLK_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_MCSPI4_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_SDMMC5_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_SDMMC5_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_SDMMC5_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_SDMMC5_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_SDMMC5_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_SDMMC5_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_SDMMC5_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_SDMMC5_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_SDMMC5_CMD_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_SDMMC5_CMD_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_SDMMC5_CLK_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_SDMMC5_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_UART3_TX_IRTX_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_UART3_TX_IRTX_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_UART3_RX_IRRX_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_UART3_RX_IRRX_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_UART3_RTS_SD_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_UART3_RTS_SD_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_UART3_CTS_RCTX_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_UART3_CTS_RCTX_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_5 */
-#define OMAP4_DPM_EMU11_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_DPM_EMU11_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_DPM_EMU10_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_DPM_EMU10_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_DPM_EMU9_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_DPM_EMU9_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_DPM_EMU8_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_DPM_EMU8_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_DPM_EMU7_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_DPM_EMU7_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_DPM_EMU6_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_DPM_EMU6_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_DPM_EMU5_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_DPM_EMU5_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_DPM_EMU4_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_DPM_EMU4_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_DPM_EMU3_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_DPM_EMU3_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_DPM_EMU2_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_DPM_EMU2_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_DPM_EMU1_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_DPM_EMU1_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_DPM_EMU0_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_DPM_EMU0_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_SYS_BOOT5_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_SYS_BOOT5_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_SYS_BOOT4_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_SYS_BOOT4_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_SYS_BOOT3_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_SYS_BOOT3_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_SYS_BOOT2_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_SYS_BOOT2_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_SYS_BOOT1_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_SYS_BOOT1_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_SYS_BOOT0_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_SYS_BOOT0_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_SYS_NIRQ2_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_SYS_NIRQ2_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_SYS_NIRQ1_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_SYS_NIRQ1_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_FREF_CLK2_OUT_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_FREF_CLK2_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_FREF_CLK1_OUT_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_FREF_CLK1_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_UNIPRO_RY2_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_UNIPRO_RY2_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_UNIPRO_RX2_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_UNIPRO_RX2_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_UNIPRO_RY1_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_UNIPRO_RY1_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_UNIPRO_RX1_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_UNIPRO_RX1_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_UNIPRO_RY0_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_UNIPRO_RY0_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_UNIPRO_RX0_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_UNIPRO_RX0_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_UNIPRO_TY2_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_UNIPRO_TY2_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_UNIPRO_TX2_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_UNIPRO_TX2_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_UNIPRO_TY1_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_UNIPRO_TY1_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_UNIPRO_TX1_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_UNIPRO_TX1_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_6 */
-#define OMAP4_DPM_EMU19_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_DPM_EMU19_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_DPM_EMU18_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_DPM_EMU18_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_DPM_EMU17_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_DPM_EMU17_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_DPM_EMU16_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_DPM_EMU16_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_DPM_EMU15_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_DPM_EMU15_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_DPM_EMU14_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_DPM_EMU14_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_DPM_EMU13_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_DPM_EMU13_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_DPM_EMU12_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_DPM_EMU12_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* CONTROL_PADCONF_GLOBAL */
-#define OMAP4_FORCE_OFFMODE_EN_SHIFT 31
-#define OMAP4_FORCE_OFFMODE_EN_MASK (1 << 31)
-
-/* CONTROL_PADCONF_MODE */
-#define OMAP4_VDDS_DV_BANK0_SHIFT 31
-#define OMAP4_VDDS_DV_BANK0_MASK (1 << 31)
-#define OMAP4_VDDS_DV_BANK1_SHIFT 30
-#define OMAP4_VDDS_DV_BANK1_MASK (1 << 30)
-#define OMAP4_VDDS_DV_BANK3_SHIFT 29
-#define OMAP4_VDDS_DV_BANK3_MASK (1 << 29)
-#define OMAP4_VDDS_DV_BANK4_SHIFT 28
-#define OMAP4_VDDS_DV_BANK4_MASK (1 << 28)
-#define OMAP4_VDDS_DV_BANK5_SHIFT 27
-#define OMAP4_VDDS_DV_BANK5_MASK (1 << 27)
-#define OMAP4_VDDS_DV_BANK6_SHIFT 26
-#define OMAP4_VDDS_DV_BANK6_MASK (1 << 26)
-#define OMAP4_VDDS_DV_C2C_SHIFT 25
-#define OMAP4_VDDS_DV_C2C_MASK (1 << 25)
-#define OMAP4_VDDS_DV_CAM_SHIFT 24
-#define OMAP4_VDDS_DV_CAM_MASK (1 << 24)
-#define OMAP4_VDDS_DV_GPMC_SHIFT 23
-#define OMAP4_VDDS_DV_GPMC_MASK (1 << 23)
-#define OMAP4_VDDS_DV_SDMMC2_SHIFT 22
-#define OMAP4_VDDS_DV_SDMMC2_MASK (1 << 22)
-
-/* CONTROL_SMART1IO_PADCONF_0 */
-#define OMAP4_ABE_DR0_SC_SHIFT 30
-#define OMAP4_ABE_DR0_SC_MASK (0x3 << 30)
-#define OMAP4_CAM_DR0_SC_SHIFT 28
-#define OMAP4_CAM_DR0_SC_MASK (0x3 << 28)
-#define OMAP4_FREF_DR2_SC_SHIFT 26
-#define OMAP4_FREF_DR2_SC_MASK (0x3 << 26)
-#define OMAP4_FREF_DR3_SC_SHIFT 24
-#define OMAP4_FREF_DR3_SC_MASK (0x3 << 24)
-#define OMAP4_GPIO_DR8_SC_SHIFT 22
-#define OMAP4_GPIO_DR8_SC_MASK (0x3 << 22)
-#define OMAP4_GPIO_DR9_SC_SHIFT 20
-#define OMAP4_GPIO_DR9_SC_MASK (0x3 << 20)
-#define OMAP4_GPMC_DR2_SC_SHIFT 18
-#define OMAP4_GPMC_DR2_SC_MASK (0x3 << 18)
-#define OMAP4_GPMC_DR3_SC_SHIFT 16
-#define OMAP4_GPMC_DR3_SC_MASK (0x3 << 16)
-#define OMAP4_GPMC_DR6_SC_SHIFT 14
-#define OMAP4_GPMC_DR6_SC_MASK (0x3 << 14)
-#define OMAP4_HDMI_DR0_SC_SHIFT 12
-#define OMAP4_HDMI_DR0_SC_MASK (0x3 << 12)
-#define OMAP4_MCSPI1_DR0_SC_SHIFT 10
-#define OMAP4_MCSPI1_DR0_SC_MASK (0x3 << 10)
-#define OMAP4_UART1_DR0_SC_SHIFT 8
-#define OMAP4_UART1_DR0_SC_MASK (0x3 << 8)
-#define OMAP4_UART3_DR0_SC_SHIFT 6
-#define OMAP4_UART3_DR0_SC_MASK (0x3 << 6)
-#define OMAP4_UART3_DR1_SC_SHIFT 4
-#define OMAP4_UART3_DR1_SC_MASK (0x3 << 4)
-#define OMAP4_UNIPRO_DR0_SC_SHIFT 2
-#define OMAP4_UNIPRO_DR0_SC_MASK (0x3 << 2)
-#define OMAP4_UNIPRO_DR1_SC_SHIFT 0
-#define OMAP4_UNIPRO_DR1_SC_MASK (0x3 << 0)
-
-/* CONTROL_SMART1IO_PADCONF_1 */
-#define OMAP4_ABE_DR0_LB_SHIFT 30
-#define OMAP4_ABE_DR0_LB_MASK (0x3 << 30)
-#define OMAP4_CAM_DR0_LB_SHIFT 28
-#define OMAP4_CAM_DR0_LB_MASK (0x3 << 28)
-#define OMAP4_FREF_DR2_LB_SHIFT 26
-#define OMAP4_FREF_DR2_LB_MASK (0x3 << 26)
-#define OMAP4_FREF_DR3_LB_SHIFT 24
-#define OMAP4_FREF_DR3_LB_MASK (0x3 << 24)
-#define OMAP4_GPIO_DR8_LB_SHIFT 22
-#define OMAP4_GPIO_DR8_LB_MASK (0x3 << 22)
-#define OMAP4_GPIO_DR9_LB_SHIFT 20
-#define OMAP4_GPIO_DR9_LB_MASK (0x3 << 20)
-#define OMAP4_GPMC_DR2_LB_SHIFT 18
-#define OMAP4_GPMC_DR2_LB_MASK (0x3 << 18)
-#define OMAP4_GPMC_DR3_LB_SHIFT 16
-#define OMAP4_GPMC_DR3_LB_MASK (0x3 << 16)
-#define OMAP4_GPMC_DR6_LB_SHIFT 14
-#define OMAP4_GPMC_DR6_LB_MASK (0x3 << 14)
-#define OMAP4_HDMI_DR0_LB_SHIFT 12
-#define OMAP4_HDMI_DR0_LB_MASK (0x3 << 12)
-#define OMAP4_MCSPI1_DR0_LB_SHIFT 10
-#define OMAP4_MCSPI1_DR0_LB_MASK (0x3 << 10)
-#define OMAP4_UART1_DR0_LB_SHIFT 8
-#define OMAP4_UART1_DR0_LB_MASK (0x3 << 8)
-#define OMAP4_UART3_DR0_LB_SHIFT 6
-#define OMAP4_UART3_DR0_LB_MASK (0x3 << 6)
-#define OMAP4_UART3_DR1_LB_SHIFT 4
-#define OMAP4_UART3_DR1_LB_MASK (0x3 << 4)
-#define OMAP4_UNIPRO_DR0_LB_SHIFT 2
-#define OMAP4_UNIPRO_DR0_LB_MASK (0x3 << 2)
-#define OMAP4_UNIPRO_DR1_LB_SHIFT 0
-#define OMAP4_UNIPRO_DR1_LB_MASK (0x3 << 0)
-
-/* CONTROL_SMART2IO_PADCONF_0 */
-#define OMAP4_C2C_DR0_LB_SHIFT 31
-#define OMAP4_C2C_DR0_LB_MASK (1 << 31)
-#define OMAP4_DPM_DR1_LB_SHIFT 30
-#define OMAP4_DPM_DR1_LB_MASK (1 << 30)
-#define OMAP4_DPM_DR2_LB_SHIFT 29
-#define OMAP4_DPM_DR2_LB_MASK (1 << 29)
-#define OMAP4_DPM_DR3_LB_SHIFT 28
-#define OMAP4_DPM_DR3_LB_MASK (1 << 28)
-#define OMAP4_GPIO_DR0_LB_SHIFT 27
-#define OMAP4_GPIO_DR0_LB_MASK (1 << 27)
-#define OMAP4_GPIO_DR1_LB_SHIFT 26
-#define OMAP4_GPIO_DR1_LB_MASK (1 << 26)
-#define OMAP4_GPIO_DR10_LB_SHIFT 25
-#define OMAP4_GPIO_DR10_LB_MASK (1 << 25)
-#define OMAP4_GPIO_DR2_LB_SHIFT 24
-#define OMAP4_GPIO_DR2_LB_MASK (1 << 24)
-#define OMAP4_GPMC_DR0_LB_SHIFT 23
-#define OMAP4_GPMC_DR0_LB_MASK (1 << 23)
-#define OMAP4_GPMC_DR1_LB_SHIFT 22
-#define OMAP4_GPMC_DR1_LB_MASK (1 << 22)
-#define OMAP4_GPMC_DR4_LB_SHIFT 21
-#define OMAP4_GPMC_DR4_LB_MASK (1 << 21)
-#define OMAP4_GPMC_DR5_LB_SHIFT 20
-#define OMAP4_GPMC_DR5_LB_MASK (1 << 20)
-#define OMAP4_GPMC_DR7_LB_SHIFT 19
-#define OMAP4_GPMC_DR7_LB_MASK (1 << 19)
-#define OMAP4_HSI2_DR0_LB_SHIFT 18
-#define OMAP4_HSI2_DR0_LB_MASK (1 << 18)
-#define OMAP4_HSI2_DR1_LB_SHIFT 17
-#define OMAP4_HSI2_DR1_LB_MASK (1 << 17)
-#define OMAP4_HSI2_DR2_LB_SHIFT 16
-#define OMAP4_HSI2_DR2_LB_MASK (1 << 16)
-#define OMAP4_KPD_DR0_LB_SHIFT 15
-#define OMAP4_KPD_DR0_LB_MASK (1 << 15)
-#define OMAP4_KPD_DR1_LB_SHIFT 14
-#define OMAP4_KPD_DR1_LB_MASK (1 << 14)
-#define OMAP4_PDM_DR0_LB_SHIFT 13
-#define OMAP4_PDM_DR0_LB_MASK (1 << 13)
-#define OMAP4_SDMMC2_DR0_LB_SHIFT 12
-#define OMAP4_SDMMC2_DR0_LB_MASK (1 << 12)
-#define OMAP4_SDMMC3_DR0_LB_SHIFT 11
-#define OMAP4_SDMMC3_DR0_LB_MASK (1 << 11)
-#define OMAP4_SDMMC4_DR0_LB_SHIFT 10
-#define OMAP4_SDMMC4_DR0_LB_MASK (1 << 10)
-#define OMAP4_SDMMC4_DR1_LB_SHIFT 9
-#define OMAP4_SDMMC4_DR1_LB_MASK (1 << 9)
-#define OMAP4_SPI3_DR0_LB_SHIFT 8
-#define OMAP4_SPI3_DR0_LB_MASK (1 << 8)
-#define OMAP4_SPI3_DR1_LB_SHIFT 7
-#define OMAP4_SPI3_DR1_LB_MASK (1 << 7)
-#define OMAP4_UART3_DR2_LB_SHIFT 6
-#define OMAP4_UART3_DR2_LB_MASK (1 << 6)
-#define OMAP4_UART3_DR3_LB_SHIFT 5
-#define OMAP4_UART3_DR3_LB_MASK (1 << 5)
-#define OMAP4_UART3_DR4_LB_SHIFT 4
-#define OMAP4_UART3_DR4_LB_MASK (1 << 4)
-#define OMAP4_UART3_DR5_LB_SHIFT 3
-#define OMAP4_UART3_DR5_LB_MASK (1 << 3)
-#define OMAP4_USBA0_DR1_LB_SHIFT 2
-#define OMAP4_USBA0_DR1_LB_MASK (1 << 2)
-#define OMAP4_USBA_DR2_LB_SHIFT 1
-#define OMAP4_USBA_DR2_LB_MASK (1 << 1)
-
-/* CONTROL_SMART2IO_PADCONF_1 */
-#define OMAP4_USBB1_DR0_LB_SHIFT 31
-#define OMAP4_USBB1_DR0_LB_MASK (1 << 31)
-#define OMAP4_USBB2_DR0_LB_SHIFT 30
-#define OMAP4_USBB2_DR0_LB_MASK (1 << 30)
-#define OMAP4_USBA0_DR0_LB_SHIFT 29
-#define OMAP4_USBA0_DR0_LB_MASK (1 << 29)
-
-/* CONTROL_SMART3IO_PADCONF_0 */
-#define OMAP4_DMIC_DR0_MB_SHIFT 30
-#define OMAP4_DMIC_DR0_MB_MASK (0x3 << 30)
-#define OMAP4_GPIO_DR3_MB_SHIFT 28
-#define OMAP4_GPIO_DR3_MB_MASK (0x3 << 28)
-#define OMAP4_GPIO_DR4_MB_SHIFT 26
-#define OMAP4_GPIO_DR4_MB_MASK (0x3 << 26)
-#define OMAP4_GPIO_DR5_MB_SHIFT 24
-#define OMAP4_GPIO_DR5_MB_MASK (0x3 << 24)
-#define OMAP4_GPIO_DR6_MB_SHIFT 22
-#define OMAP4_GPIO_DR6_MB_MASK (0x3 << 22)
-#define OMAP4_HSI_DR1_MB_SHIFT 20
-#define OMAP4_HSI_DR1_MB_MASK (0x3 << 20)
-#define OMAP4_HSI_DR2_MB_SHIFT 18
-#define OMAP4_HSI_DR2_MB_MASK (0x3 << 18)
-#define OMAP4_HSI_DR3_MB_SHIFT 16
-#define OMAP4_HSI_DR3_MB_MASK (0x3 << 16)
-#define OMAP4_MCBSP2_DR0_MB_SHIFT 14
-#define OMAP4_MCBSP2_DR0_MB_MASK (0x3 << 14)
-#define OMAP4_MCSPI4_DR0_MB_SHIFT 12
-#define OMAP4_MCSPI4_DR0_MB_MASK (0x3 << 12)
-#define OMAP4_MCSPI4_DR1_MB_SHIFT 10
-#define OMAP4_MCSPI4_DR1_MB_MASK (0x3 << 10)
-#define OMAP4_SDMMC3_DR0_MB_SHIFT 8
-#define OMAP4_SDMMC3_DR0_MB_MASK (0x3 << 8)
-#define OMAP4_SPI2_DR0_MB_SHIFT 0
-#define OMAP4_SPI2_DR0_MB_MASK (0x3 << 0)
-
-/* CONTROL_SMART3IO_PADCONF_1 */
-#define OMAP4_SPI2_DR1_MB_SHIFT 30
-#define OMAP4_SPI2_DR1_MB_MASK (0x3 << 30)
-#define OMAP4_SPI2_DR2_MB_SHIFT 28
-#define OMAP4_SPI2_DR2_MB_MASK (0x3 << 28)
-#define OMAP4_UART2_DR0_MB_SHIFT 26
-#define OMAP4_UART2_DR0_MB_MASK (0x3 << 26)
-#define OMAP4_UART2_DR1_MB_SHIFT 24
-#define OMAP4_UART2_DR1_MB_MASK (0x3 << 24)
-#define OMAP4_UART4_DR0_MB_SHIFT 22
-#define OMAP4_UART4_DR0_MB_MASK (0x3 << 22)
-#define OMAP4_HSI_DR0_MB_SHIFT 20
-#define OMAP4_HSI_DR0_MB_MASK (0x3 << 20)
-
-/* CONTROL_SMART3IO_PADCONF_2 */
-#define OMAP4_DMIC_DR0_LB_SHIFT 31
-#define OMAP4_DMIC_DR0_LB_MASK (1 << 31)
-#define OMAP4_GPIO_DR3_LB_SHIFT 30
-#define OMAP4_GPIO_DR3_LB_MASK (1 << 30)
-#define OMAP4_GPIO_DR4_LB_SHIFT 29
-#define OMAP4_GPIO_DR4_LB_MASK (1 << 29)
-#define OMAP4_GPIO_DR5_LB_SHIFT 28
-#define OMAP4_GPIO_DR5_LB_MASK (1 << 28)
-#define OMAP4_GPIO_DR6_LB_SHIFT 27
-#define OMAP4_GPIO_DR6_LB_MASK (1 << 27)
-#define OMAP4_HSI_DR1_LB_SHIFT 26
-#define OMAP4_HSI_DR1_LB_MASK (1 << 26)
-#define OMAP4_HSI_DR2_LB_SHIFT 25
-#define OMAP4_HSI_DR2_LB_MASK (1 << 25)
-#define OMAP4_HSI_DR3_LB_SHIFT 24
-#define OMAP4_HSI_DR3_LB_MASK (1 << 24)
-#define OMAP4_MCBSP2_DR0_LB_SHIFT 23
-#define OMAP4_MCBSP2_DR0_LB_MASK (1 << 23)
-#define OMAP4_MCSPI4_DR0_LB_SHIFT 22
-#define OMAP4_MCSPI4_DR0_LB_MASK (1 << 22)
-#define OMAP4_MCSPI4_DR1_LB_SHIFT 21
-#define OMAP4_MCSPI4_DR1_LB_MASK (1 << 21)
-#define OMAP4_SLIMBUS2_DR0_LB_SHIFT 18
-#define OMAP4_SLIMBUS2_DR0_LB_MASK (1 << 18)
-#define OMAP4_SPI2_DR0_LB_SHIFT 16
-#define OMAP4_SPI2_DR0_LB_MASK (1 << 16)
-#define OMAP4_SPI2_DR1_LB_SHIFT 15
-#define OMAP4_SPI2_DR1_LB_MASK (1 << 15)
-#define OMAP4_SPI2_DR2_LB_SHIFT 14
-#define OMAP4_SPI2_DR2_LB_MASK (1 << 14)
-#define OMAP4_UART2_DR0_LB_SHIFT 13
-#define OMAP4_UART2_DR0_LB_MASK (1 << 13)
-#define OMAP4_UART2_DR1_LB_SHIFT 12
-#define OMAP4_UART2_DR1_LB_MASK (1 << 12)
-#define OMAP4_UART4_DR0_LB_SHIFT 11
-#define OMAP4_UART4_DR0_LB_MASK (1 << 11)
-#define OMAP4_HSI_DR0_LB_SHIFT 10
-#define OMAP4_HSI_DR0_LB_MASK (1 << 10)
-
-/* CONTROL_USBB_HSIC */
-#define OMAP4_USBB2_DR1_SR_SHIFT 30
-#define OMAP4_USBB2_DR1_SR_MASK (0x3 << 30)
-#define OMAP4_USBB2_DR1_I_SHIFT 27
-#define OMAP4_USBB2_DR1_I_MASK (0x7 << 27)
-#define OMAP4_USBB1_DR1_SR_SHIFT 25
-#define OMAP4_USBB1_DR1_SR_MASK (0x3 << 25)
-#define OMAP4_USBB1_DR1_I_SHIFT 22
-#define OMAP4_USBB1_DR1_I_MASK (0x7 << 22)
-#define OMAP4_USBB1_HSIC_DATA_WD_SHIFT 20
-#define OMAP4_USBB1_HSIC_DATA_WD_MASK (0x3 << 20)
-#define OMAP4_USBB1_HSIC_STROBE_WD_SHIFT 18
-#define OMAP4_USBB1_HSIC_STROBE_WD_MASK (0x3 << 18)
-#define OMAP4_USBB2_HSIC_DATA_WD_SHIFT 16
-#define OMAP4_USBB2_HSIC_DATA_WD_MASK (0x3 << 16)
-#define OMAP4_USBB2_HSIC_STROBE_WD_SHIFT 14
-#define OMAP4_USBB2_HSIC_STROBE_WD_MASK (0x3 << 14)
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_SHIFT 13
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_MASK (1 << 13)
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_SHIFT 11
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_MASK (0x3 << 11)
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_SHIFT 10
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK (1 << 10)
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_SHIFT 8
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_MASK (0x3 << 8)
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_SHIFT 7
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_MASK (1 << 7)
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_SHIFT 5
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_MASK (0x3 << 5)
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_SHIFT 4
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK (1 << 4)
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_SHIFT 2
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_MASK (0x3 << 2)
-
-/* CONTROL_SLIMBUS */
-#define OMAP4_SLIMBUS1_DR0_MB_SHIFT 30
-#define OMAP4_SLIMBUS1_DR0_MB_MASK (0x3 << 30)
-#define OMAP4_SLIMBUS1_DR1_MB_SHIFT 28
-#define OMAP4_SLIMBUS1_DR1_MB_MASK (0x3 << 28)
-#define OMAP4_SLIMBUS2_DR0_MB_SHIFT 26
-#define OMAP4_SLIMBUS2_DR0_MB_MASK (0x3 << 26)
-#define OMAP4_SLIMBUS2_DR1_MB_SHIFT 24
-#define OMAP4_SLIMBUS2_DR1_MB_MASK (0x3 << 24)
-#define OMAP4_SLIMBUS2_DR2_MB_SHIFT 22
-#define OMAP4_SLIMBUS2_DR2_MB_MASK (0x3 << 22)
-#define OMAP4_SLIMBUS2_DR3_MB_SHIFT 20
-#define OMAP4_SLIMBUS2_DR3_MB_MASK (0x3 << 20)
-#define OMAP4_SLIMBUS1_DR0_LB_SHIFT 19
-#define OMAP4_SLIMBUS1_DR0_LB_MASK (1 << 19)
-#define OMAP4_SLIMBUS2_DR1_LB_SHIFT 18
-#define OMAP4_SLIMBUS2_DR1_LB_MASK (1 << 18)
-
-/* CONTROL_PBIASLITE */
-#define OMAP4_USIM_PBIASLITE_HIZ_MODE_SHIFT 31
-#define OMAP4_USIM_PBIASLITE_HIZ_MODE_MASK (1 << 31)
-#define OMAP4_USIM_PBIASLITE_SUPPLY_HI_OUT_SHIFT 30
-#define OMAP4_USIM_PBIASLITE_SUPPLY_HI_OUT_MASK (1 << 30)
-#define OMAP4_USIM_PBIASLITE_VMODE_ERROR_SHIFT 29
-#define OMAP4_USIM_PBIASLITE_VMODE_ERROR_MASK (1 << 29)
-#define OMAP4_USIM_PBIASLITE_PWRDNZ_SHIFT 28
-#define OMAP4_USIM_PBIASLITE_PWRDNZ_MASK (1 << 28)
-#define OMAP4_USIM_PBIASLITE_VMODE_SHIFT 27
-#define OMAP4_USIM_PBIASLITE_VMODE_MASK (1 << 27)
-#define OMAP4_MMC1_PWRDNZ_SHIFT 26
-#define OMAP4_MMC1_PWRDNZ_MASK (1 << 26)
-#define OMAP4_MMC1_PBIASLITE_HIZ_MODE_SHIFT 25
-#define OMAP4_MMC1_PBIASLITE_HIZ_MODE_MASK (1 << 25)
-#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT_SHIFT 24
-#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT_MASK (1 << 24)
-#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR_SHIFT 23
-#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK (1 << 23)
-#define OMAP4_MMC1_PBIASLITE_PWRDNZ_SHIFT 22
-#define OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK (1 << 22)
-#define OMAP4_MMC1_PBIASLITE_VMODE_SHIFT 21
-#define OMAP4_MMC1_PBIASLITE_VMODE_MASK (1 << 21)
-#define OMAP4_USBC1_ICUSB_PWRDNZ_SHIFT 20
-#define OMAP4_USBC1_ICUSB_PWRDNZ_MASK (1 << 20)
-
-/* CONTROL_I2C_0 */
-#define OMAP4_I2C4_SDA_GLFENB_SHIFT 31
-#define OMAP4_I2C4_SDA_GLFENB_MASK (1 << 31)
-#define OMAP4_I2C4_SDA_LOAD_BITS_SHIFT 29
-#define OMAP4_I2C4_SDA_LOAD_BITS_MASK (0x3 << 29)
-#define OMAP4_I2C4_SDA_PULLUPRESX_SHIFT 28
-#define OMAP4_I2C4_SDA_PULLUPRESX_MASK (1 << 28)
-#define OMAP4_I2C3_SDA_GLFENB_SHIFT 27
-#define OMAP4_I2C3_SDA_GLFENB_MASK (1 << 27)
-#define OMAP4_I2C3_SDA_LOAD_BITS_SHIFT 25
-#define OMAP4_I2C3_SDA_LOAD_BITS_MASK (0x3 << 25)
-#define OMAP4_I2C3_SDA_PULLUPRESX_SHIFT 24
-#define OMAP4_I2C3_SDA_PULLUPRESX_MASK (1 << 24)
-#define OMAP4_I2C2_SDA_GLFENB_SHIFT 23
-#define OMAP4_I2C2_SDA_GLFENB_MASK (1 << 23)
-#define OMAP4_I2C2_SDA_LOAD_BITS_SHIFT 21
-#define OMAP4_I2C2_SDA_LOAD_BITS_MASK (0x3 << 21)
-#define OMAP4_I2C2_SDA_PULLUPRESX_SHIFT 20
-#define OMAP4_I2C2_SDA_PULLUPRESX_MASK (1 << 20)
-#define OMAP4_I2C1_SDA_GLFENB_SHIFT 19
-#define OMAP4_I2C1_SDA_GLFENB_MASK (1 << 19)
-#define OMAP4_I2C1_SDA_LOAD_BITS_SHIFT 17
-#define OMAP4_I2C1_SDA_LOAD_BITS_MASK (0x3 << 17)
-#define OMAP4_I2C1_SDA_PULLUPRESX_SHIFT 16
-#define OMAP4_I2C1_SDA_PULLUPRESX_MASK (1 << 16)
-#define OMAP4_I2C4_SCL_GLFENB_SHIFT 15
-#define OMAP4_I2C4_SCL_GLFENB_MASK (1 << 15)
-#define OMAP4_I2C4_SCL_LOAD_BITS_SHIFT 13
-#define OMAP4_I2C4_SCL_LOAD_BITS_MASK (0x3 << 13)
-#define OMAP4_I2C4_SCL_PULLUPRESX_SHIFT 12
-#define OMAP4_I2C4_SCL_PULLUPRESX_MASK (1 << 12)
-#define OMAP4_I2C3_SCL_GLFENB_SHIFT 11
-#define OMAP4_I2C3_SCL_GLFENB_MASK (1 << 11)
-#define OMAP4_I2C3_SCL_LOAD_BITS_SHIFT 9
-#define OMAP4_I2C3_SCL_LOAD_BITS_MASK (0x3 << 9)
-#define OMAP4_I2C3_SCL_PULLUPRESX_SHIFT 8
-#define OMAP4_I2C3_SCL_PULLUPRESX_MASK (1 << 8)
-#define OMAP4_I2C2_SCL_GLFENB_SHIFT 7
-#define OMAP4_I2C2_SCL_GLFENB_MASK (1 << 7)
-#define OMAP4_I2C2_SCL_LOAD_BITS_SHIFT 5
-#define OMAP4_I2C2_SCL_LOAD_BITS_MASK (0x3 << 5)
-#define OMAP4_I2C2_SCL_PULLUPRESX_SHIFT 4
-#define OMAP4_I2C2_SCL_PULLUPRESX_MASK (1 << 4)
-#define OMAP4_I2C1_SCL_GLFENB_SHIFT 3
-#define OMAP4_I2C1_SCL_GLFENB_MASK (1 << 3)
-#define OMAP4_I2C1_SCL_LOAD_BITS_SHIFT 1
-#define OMAP4_I2C1_SCL_LOAD_BITS_MASK (0x3 << 1)
-#define OMAP4_I2C1_SCL_PULLUPRESX_SHIFT 0
-#define OMAP4_I2C1_SCL_PULLUPRESX_MASK (1 << 0)
-
-/* CONTROL_CAMERA_RX */
-#define OMAP4_CAMERARX_UNIPRO_CTRLCLKEN_SHIFT 31
-#define OMAP4_CAMERARX_UNIPRO_CTRLCLKEN_MASK (1 << 31)
-#define OMAP4_CAMERARX_CSI22_LANEENABLE_SHIFT 29
-#define OMAP4_CAMERARX_CSI22_LANEENABLE_MASK (0x3 << 29)
-#define OMAP4_CAMERARX_CSI21_LANEENABLE_SHIFT 24
-#define OMAP4_CAMERARX_CSI21_LANEENABLE_MASK (0x1f << 24)
-#define OMAP4_CAMERARX_UNIPRO_CAMMODE_SHIFT 22
-#define OMAP4_CAMERARX_UNIPRO_CAMMODE_MASK (0x3 << 22)
-#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_SHIFT 21
-#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_MASK (1 << 21)
-#define OMAP4_CAMERARX_CSI22_CAMMODE_SHIFT 19
-#define OMAP4_CAMERARX_CSI22_CAMMODE_MASK (0x3 << 19)
-#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_SHIFT 18
-#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_MASK (1 << 18)
-#define OMAP4_CAMERARX_CSI21_CAMMODE_SHIFT 16
-#define OMAP4_CAMERARX_CSI21_CAMMODE_MASK (0x3 << 16)
-
-/* CONTROL_AVDAC */
-#define OMAP4_AVDAC_ACEN_SHIFT 31
-#define OMAP4_AVDAC_ACEN_MASK (1 << 31)
-#define OMAP4_AVDAC_TVOUTBYPASS_SHIFT 30
-#define OMAP4_AVDAC_TVOUTBYPASS_MASK (1 << 30)
-#define OMAP4_AVDAC_INPUTINV_SHIFT 29
-#define OMAP4_AVDAC_INPUTINV_MASK (1 << 29)
-#define OMAP4_AVDAC_CTL_SHIFT 13
-#define OMAP4_AVDAC_CTL_MASK (0xffff << 13)
-#define OMAP4_AVDAC_CTL_WR_ACK_SHIFT 12
-#define OMAP4_AVDAC_CTL_WR_ACK_MASK (1 << 12)
-
-/* CONTROL_HDMI_TX_PHY */
-#define OMAP4_HDMITXPHY_PADORDER_SHIFT 31
-#define OMAP4_HDMITXPHY_PADORDER_MASK (1 << 31)
-#define OMAP4_HDMITXPHY_TXVALID_SHIFT 30
-#define OMAP4_HDMITXPHY_TXVALID_MASK (1 << 30)
-#define OMAP4_HDMITXPHY_ENBYPASSCLK_SHIFT 29
-#define OMAP4_HDMITXPHY_ENBYPASSCLK_MASK (1 << 29)
-#define OMAP4_HDMITXPHY_PD_PULLUPDET_SHIFT 28
-#define OMAP4_HDMITXPHY_PD_PULLUPDET_MASK (1 << 28)
-
-/* CONTROL_MMC2 */
-#define OMAP4_MMC2_FEEDBACK_CLK_SEL_SHIFT 31
-#define OMAP4_MMC2_FEEDBACK_CLK_SEL_MASK (1 << 31)
-
-/* CONTROL_DSIPHY */
-#define OMAP4_DSI2_LANEENABLE_SHIFT 29
-#define OMAP4_DSI2_LANEENABLE_MASK (0x7 << 29)
-#define OMAP4_DSI1_LANEENABLE_SHIFT 24
-#define OMAP4_DSI1_LANEENABLE_MASK (0x1f << 24)
-#define OMAP4_DSI1_PIPD_SHIFT 19
-#define OMAP4_DSI1_PIPD_MASK (0x1f << 19)
-#define OMAP4_DSI2_PIPD_SHIFT 14
-#define OMAP4_DSI2_PIPD_MASK (0x1f << 14)
-
-/* CONTROL_MCBSPLP */
-#define OMAP4_ALBCTRLRX_FSX_SHIFT 31
-#define OMAP4_ALBCTRLRX_FSX_MASK (1 << 31)
-#define OMAP4_ALBCTRLRX_CLKX_SHIFT 30
-#define OMAP4_ALBCTRLRX_CLKX_MASK (1 << 30)
-#define OMAP4_ABE_MCBSP1_DR_EN_SHIFT 29
-#define OMAP4_ABE_MCBSP1_DR_EN_MASK (1 << 29)
-
-/* CONTROL_USB2PHYCORE */
-#define OMAP4_USB2PHY_AUTORESUME_EN_SHIFT 31
-#define OMAP4_USB2PHY_AUTORESUME_EN_MASK (1 << 31)
-#define OMAP4_USB2PHY_DISCHGDET_SHIFT 30
-#define OMAP4_USB2PHY_DISCHGDET_MASK (1 << 30)
-#define OMAP4_USB2PHY_GPIOMODE_SHIFT 29
-#define OMAP4_USB2PHY_GPIOMODE_MASK (1 << 29)
-#define OMAP4_USB2PHY_CHG_DET_EXT_CTL_SHIFT 28
-#define OMAP4_USB2PHY_CHG_DET_EXT_CTL_MASK (1 << 28)
-#define OMAP4_USB2PHY_RDM_PD_CHGDET_EN_SHIFT 27
-#define OMAP4_USB2PHY_RDM_PD_CHGDET_EN_MASK (1 << 27)
-#define OMAP4_USB2PHY_RDP_PU_CHGDET_EN_SHIFT 26
-#define OMAP4_USB2PHY_RDP_PU_CHGDET_EN_MASK (1 << 26)
-#define OMAP4_USB2PHY_CHG_VSRC_EN_SHIFT 25
-#define OMAP4_USB2PHY_CHG_VSRC_EN_MASK (1 << 25)
-#define OMAP4_USB2PHY_CHG_ISINK_EN_SHIFT 24
-#define OMAP4_USB2PHY_CHG_ISINK_EN_MASK (1 << 24)
-#define OMAP4_USB2PHY_CHG_DET_STATUS_SHIFT 21
-#define OMAP4_USB2PHY_CHG_DET_STATUS_MASK (0x7 << 21)
-#define OMAP4_USB2PHY_CHG_DET_DM_COMP_SHIFT 20
-#define OMAP4_USB2PHY_CHG_DET_DM_COMP_MASK (1 << 20)
-#define OMAP4_USB2PHY_CHG_DET_DP_COMP_SHIFT 19
-#define OMAP4_USB2PHY_CHG_DET_DP_COMP_MASK (1 << 19)
-#define OMAP4_USB2PHY_DATADET_SHIFT 18
-#define OMAP4_USB2PHY_DATADET_MASK (1 << 18)
-#define OMAP4_USB2PHY_SINKONDP_SHIFT 17
-#define OMAP4_USB2PHY_SINKONDP_MASK (1 << 17)
-#define OMAP4_USB2PHY_SRCONDM_SHIFT 16
-#define OMAP4_USB2PHY_SRCONDM_MASK (1 << 16)
-#define OMAP4_USB2PHY_RESTARTCHGDET_SHIFT 15
-#define OMAP4_USB2PHY_RESTARTCHGDET_MASK (1 << 15)
-#define OMAP4_USB2PHY_CHGDETDONE_SHIFT 14
-#define OMAP4_USB2PHY_CHGDETDONE_MASK (1 << 14)
-#define OMAP4_USB2PHY_CHGDETECTED_SHIFT 13
-#define OMAP4_USB2PHY_CHGDETECTED_MASK (1 << 13)
-#define OMAP4_USB2PHY_MCPCPUEN_SHIFT 12
-#define OMAP4_USB2PHY_MCPCPUEN_MASK (1 << 12)
-#define OMAP4_USB2PHY_MCPCMODEEN_SHIFT 11
-#define OMAP4_USB2PHY_MCPCMODEEN_MASK (1 << 11)
-#define OMAP4_USB2PHY_RESETDONEMCLK_SHIFT 10
-#define OMAP4_USB2PHY_RESETDONEMCLK_MASK (1 << 10)
-#define OMAP4_USB2PHY_UTMIRESETDONE_SHIFT 9
-#define OMAP4_USB2PHY_UTMIRESETDONE_MASK (1 << 9)
-#define OMAP4_USB2PHY_TXBITSTUFFENABLE_SHIFT 8
-#define OMAP4_USB2PHY_TXBITSTUFFENABLE_MASK (1 << 8)
-#define OMAP4_USB2PHY_DATAPOLARITYN_SHIFT 7
-#define OMAP4_USB2PHY_DATAPOLARITYN_MASK (1 << 7)
-#define OMAP4_USBDPLL_FREQLOCK_SHIFT 6
-#define OMAP4_USBDPLL_FREQLOCK_MASK (1 << 6)
-#define OMAP4_USB2PHY_RESETDONETCLK_SHIFT 5
-#define OMAP4_USB2PHY_RESETDONETCLK_MASK (1 << 5)
-
-/* CONTROL_I2C_1 */
-#define OMAP4_HDMI_DDC_SDA_GLFENB_SHIFT 31
-#define OMAP4_HDMI_DDC_SDA_GLFENB_MASK (1 << 31)
-#define OMAP4_HDMI_DDC_SDA_LOAD_BITS_SHIFT 29
-#define OMAP4_HDMI_DDC_SDA_LOAD_BITS_MASK (0x3 << 29)
-#define OMAP4_HDMI_DDC_SDA_PULLUPRESX_SHIFT 28
-#define OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK (1 << 28)
-#define OMAP4_HDMI_DDC_SCL_GLFENB_SHIFT 27
-#define OMAP4_HDMI_DDC_SCL_GLFENB_MASK (1 << 27)
-#define OMAP4_HDMI_DDC_SCL_LOAD_BITS_SHIFT 25
-#define OMAP4_HDMI_DDC_SCL_LOAD_BITS_MASK (0x3 << 25)
-#define OMAP4_HDMI_DDC_SCL_PULLUPRESX_SHIFT 24
-#define OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK (1 << 24)
-#define OMAP4_HDMI_DDC_SDA_HSMODE_SHIFT 23
-#define OMAP4_HDMI_DDC_SDA_HSMODE_MASK (1 << 23)
-#define OMAP4_HDMI_DDC_SDA_NMODE_SHIFT 22
-#define OMAP4_HDMI_DDC_SDA_NMODE_MASK (1 << 22)
-#define OMAP4_HDMI_DDC_SCL_HSMODE_SHIFT 21
-#define OMAP4_HDMI_DDC_SCL_HSMODE_MASK (1 << 21)
-#define OMAP4_HDMI_DDC_SCL_NMODE_SHIFT 20
-#define OMAP4_HDMI_DDC_SCL_NMODE_MASK (1 << 20)
-
-/* CONTROL_MMC1 */
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP0_SHIFT 31
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP0_MASK (1 << 31)
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP1_SHIFT 30
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK (1 << 30)
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP2_SHIFT 29
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK (1 << 29)
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP3_SHIFT 28
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK (1 << 28)
-#define OMAP4_SDMMC1_DR0_SPEEDCTRL_SHIFT 27
-#define OMAP4_SDMMC1_DR0_SPEEDCTRL_MASK (1 << 27)
-#define OMAP4_SDMMC1_DR1_SPEEDCTRL_SHIFT 26
-#define OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK (1 << 26)
-#define OMAP4_SDMMC1_DR2_SPEEDCTRL_SHIFT 25
-#define OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK (1 << 25)
-#define OMAP4_USBC1_DR0_SPEEDCTRL_SHIFT 24
-#define OMAP4_USBC1_DR0_SPEEDCTRL_MASK (1 << 24)
-#define OMAP4_USB_FD_CDEN_SHIFT 23
-#define OMAP4_USB_FD_CDEN_MASK (1 << 23)
-#define OMAP4_USBC1_ICUSB_DP_PDDIS_SHIFT 22
-#define OMAP4_USBC1_ICUSB_DP_PDDIS_MASK (1 << 22)
-#define OMAP4_USBC1_ICUSB_DM_PDDIS_SHIFT 21
-#define OMAP4_USBC1_ICUSB_DM_PDDIS_MASK (1 << 21)
-
-/* CONTROL_HSI */
-#define OMAP4_HSI1_CALLOOP_SEL_SHIFT 31
-#define OMAP4_HSI1_CALLOOP_SEL_MASK (1 << 31)
-#define OMAP4_HSI1_CALMUX_SEL_SHIFT 30
-#define OMAP4_HSI1_CALMUX_SEL_MASK (1 << 30)
-#define OMAP4_HSI2_CALLOOP_SEL_SHIFT 29
-#define OMAP4_HSI2_CALLOOP_SEL_MASK (1 << 29)
-#define OMAP4_HSI2_CALMUX_SEL_SHIFT 28
-#define OMAP4_HSI2_CALMUX_SEL_MASK (1 << 28)
-
-/* CONTROL_USB */
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT0_AUTO_EN_SHIFT 31
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT0_AUTO_EN_MASK (1 << 31)
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT1_AUTO_EN_SHIFT 30
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT1_AUTO_EN_MASK (1 << 30)
-
-/* CONTROL_HDQ */
-#define OMAP4_HDQ_SIO_PWRDNZ_SHIFT 31
-#define OMAP4_HDQ_SIO_PWRDNZ_MASK (1 << 31)
-
-/* CONTROL_LPDDR2IO1_0 */
-#define OMAP4_LPDDR2IO1_GR4_SR_SHIFT 30
-#define OMAP4_LPDDR2IO1_GR4_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO1_GR4_I_SHIFT 27
-#define OMAP4_LPDDR2IO1_GR4_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO1_GR4_WD_SHIFT 25
-#define OMAP4_LPDDR2IO1_GR4_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO1_GR3_SR_SHIFT 22
-#define OMAP4_LPDDR2IO1_GR3_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO1_GR3_I_SHIFT 19
-#define OMAP4_LPDDR2IO1_GR3_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO1_GR3_WD_SHIFT 17
-#define OMAP4_LPDDR2IO1_GR3_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO1_GR2_SR_SHIFT 14
-#define OMAP4_LPDDR2IO1_GR2_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO1_GR2_I_SHIFT 11
-#define OMAP4_LPDDR2IO1_GR2_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO1_GR2_WD_SHIFT 9
-#define OMAP4_LPDDR2IO1_GR2_WD_MASK (0x3 << 9)
-#define OMAP4_LPDDR2IO1_GR1_SR_SHIFT 6
-#define OMAP4_LPDDR2IO1_GR1_SR_MASK (0x3 << 6)
-#define OMAP4_LPDDR2IO1_GR1_I_SHIFT 3
-#define OMAP4_LPDDR2IO1_GR1_I_MASK (0x7 << 3)
-#define OMAP4_LPDDR2IO1_GR1_WD_SHIFT 1
-#define OMAP4_LPDDR2IO1_GR1_WD_MASK (0x3 << 1)
-
-/* CONTROL_LPDDR2IO1_1 */
-#define OMAP4_LPDDR2IO1_GR8_SR_SHIFT 30
-#define OMAP4_LPDDR2IO1_GR8_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO1_GR8_I_SHIFT 27
-#define OMAP4_LPDDR2IO1_GR8_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO1_GR8_WD_SHIFT 25
-#define OMAP4_LPDDR2IO1_GR8_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO1_GR7_SR_SHIFT 22
-#define OMAP4_LPDDR2IO1_GR7_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO1_GR7_I_SHIFT 19
-#define OMAP4_LPDDR2IO1_GR7_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO1_GR7_WD_SHIFT 17
-#define OMAP4_LPDDR2IO1_GR7_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO1_GR6_SR_SHIFT 14
-#define OMAP4_LPDDR2IO1_GR6_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO1_GR6_I_SHIFT 11
-#define OMAP4_LPDDR2IO1_GR6_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO1_GR6_WD_SHIFT 9
-#define OMAP4_LPDDR2IO1_GR6_WD_MASK (0x3 << 9)
-#define OMAP4_LPDDR2IO1_GR5_SR_SHIFT 6
-#define OMAP4_LPDDR2IO1_GR5_SR_MASK (0x3 << 6)
-#define OMAP4_LPDDR2IO1_GR5_I_SHIFT 3
-#define OMAP4_LPDDR2IO1_GR5_I_MASK (0x7 << 3)
-#define OMAP4_LPDDR2IO1_GR5_WD_SHIFT 1
-#define OMAP4_LPDDR2IO1_GR5_WD_MASK (0x3 << 1)
-
-/* CONTROL_LPDDR2IO1_2 */
-#define OMAP4_LPDDR2IO1_GR11_SR_SHIFT 30
-#define OMAP4_LPDDR2IO1_GR11_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO1_GR11_I_SHIFT 27
-#define OMAP4_LPDDR2IO1_GR11_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO1_GR11_WD_SHIFT 25
-#define OMAP4_LPDDR2IO1_GR11_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO1_GR10_SR_SHIFT 22
-#define OMAP4_LPDDR2IO1_GR10_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO1_GR10_I_SHIFT 19
-#define OMAP4_LPDDR2IO1_GR10_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO1_GR10_WD_SHIFT 17
-#define OMAP4_LPDDR2IO1_GR10_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO1_GR9_SR_SHIFT 14
-#define OMAP4_LPDDR2IO1_GR9_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO1_GR9_I_SHIFT 11
-#define OMAP4_LPDDR2IO1_GR9_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO1_GR9_WD_SHIFT 9
-#define OMAP4_LPDDR2IO1_GR9_WD_MASK (0x3 << 9)
-
-/* CONTROL_LPDDR2IO1_3 */
-#define OMAP4_LPDDR21_VREF_CA_CCAP0_SHIFT 31
-#define OMAP4_LPDDR21_VREF_CA_CCAP0_MASK (1 << 31)
-#define OMAP4_LPDDR21_VREF_CA_CCAP1_SHIFT 30
-#define OMAP4_LPDDR21_VREF_CA_CCAP1_MASK (1 << 30)
-#define OMAP4_LPDDR21_VREF_CA_INT_CCAP0_SHIFT 29
-#define OMAP4_LPDDR21_VREF_CA_INT_CCAP0_MASK (1 << 29)
-#define OMAP4_LPDDR21_VREF_CA_INT_CCAP1_SHIFT 28
-#define OMAP4_LPDDR21_VREF_CA_INT_CCAP1_MASK (1 << 28)
-#define OMAP4_LPDDR21_VREF_CA_INT_TAP0_SHIFT 27
-#define OMAP4_LPDDR21_VREF_CA_INT_TAP0_MASK (1 << 27)
-#define OMAP4_LPDDR21_VREF_CA_INT_TAP1_SHIFT 26
-#define OMAP4_LPDDR21_VREF_CA_INT_TAP1_MASK (1 << 26)
-#define OMAP4_LPDDR21_VREF_CA_TAP0_SHIFT 25
-#define OMAP4_LPDDR21_VREF_CA_TAP0_MASK (1 << 25)
-#define OMAP4_LPDDR21_VREF_CA_TAP1_SHIFT 24
-#define OMAP4_LPDDR21_VREF_CA_TAP1_MASK (1 << 24)
-#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP0_SHIFT 23
-#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP0_MASK (1 << 23)
-#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP1_SHIFT 22
-#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP1_MASK (1 << 22)
-#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP0_SHIFT 21
-#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP0_MASK (1 << 21)
-#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP1_SHIFT 20
-#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP1_MASK (1 << 20)
-#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP0_SHIFT 19
-#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP0_MASK (1 << 19)
-#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP1_SHIFT 18
-#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP1_MASK (1 << 18)
-#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP0_SHIFT 17
-#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP0_MASK (1 << 17)
-#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP1_SHIFT 16
-#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP1_MASK (1 << 16)
-#define OMAP4_LPDDR21_VREF_DQ_CCAP0_SHIFT 15
-#define OMAP4_LPDDR21_VREF_DQ_CCAP0_MASK (1 << 15)
-#define OMAP4_LPDDR21_VREF_DQ_CCAP1_SHIFT 14
-#define OMAP4_LPDDR21_VREF_DQ_CCAP1_MASK (1 << 14)
-#define OMAP4_LPDDR21_VREF_DQ_TAP0_SHIFT 13
-#define OMAP4_LPDDR21_VREF_DQ_TAP0_MASK (1 << 13)
-#define OMAP4_LPDDR21_VREF_DQ_TAP1_SHIFT 12
-#define OMAP4_LPDDR21_VREF_DQ_TAP1_MASK (1 << 12)
-
-/* CONTROL_LPDDR2IO2_0 */
-#define OMAP4_LPDDR2IO2_GR4_SR_SHIFT 30
-#define OMAP4_LPDDR2IO2_GR4_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO2_GR4_I_SHIFT 27
-#define OMAP4_LPDDR2IO2_GR4_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO2_GR4_WD_SHIFT 25
-#define OMAP4_LPDDR2IO2_GR4_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO2_GR3_SR_SHIFT 22
-#define OMAP4_LPDDR2IO2_GR3_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO2_GR3_I_SHIFT 19
-#define OMAP4_LPDDR2IO2_GR3_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO2_GR3_WD_SHIFT 17
-#define OMAP4_LPDDR2IO2_GR3_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO2_GR2_SR_SHIFT 14
-#define OMAP4_LPDDR2IO2_GR2_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO2_GR2_I_SHIFT 11
-#define OMAP4_LPDDR2IO2_GR2_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO2_GR2_WD_SHIFT 9
-#define OMAP4_LPDDR2IO2_GR2_WD_MASK (0x3 << 9)
-#define OMAP4_LPDDR2IO2_GR1_SR_SHIFT 6
-#define OMAP4_LPDDR2IO2_GR1_SR_MASK (0x3 << 6)
-#define OMAP4_LPDDR2IO2_GR1_I_SHIFT 3
-#define OMAP4_LPDDR2IO2_GR1_I_MASK (0x7 << 3)
-#define OMAP4_LPDDR2IO2_GR1_WD_SHIFT 1
-#define OMAP4_LPDDR2IO2_GR1_WD_MASK (0x3 << 1)
-
-/* CONTROL_LPDDR2IO2_1 */
-#define OMAP4_LPDDR2IO2_GR8_SR_SHIFT 30
-#define OMAP4_LPDDR2IO2_GR8_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO2_GR8_I_SHIFT 27
-#define OMAP4_LPDDR2IO2_GR8_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO2_GR8_WD_SHIFT 25
-#define OMAP4_LPDDR2IO2_GR8_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO2_GR7_SR_SHIFT 22
-#define OMAP4_LPDDR2IO2_GR7_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO2_GR7_I_SHIFT 19
-#define OMAP4_LPDDR2IO2_GR7_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO2_GR7_WD_SHIFT 17
-#define OMAP4_LPDDR2IO2_GR7_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO2_GR6_SR_SHIFT 14
-#define OMAP4_LPDDR2IO2_GR6_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO2_GR6_I_SHIFT 11
-#define OMAP4_LPDDR2IO2_GR6_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO2_GR6_WD_SHIFT 9
-#define OMAP4_LPDDR2IO2_GR6_WD_MASK (0x3 << 9)
-#define OMAP4_LPDDR2IO2_GR5_SR_SHIFT 6
-#define OMAP4_LPDDR2IO2_GR5_SR_MASK (0x3 << 6)
-#define OMAP4_LPDDR2IO2_GR5_I_SHIFT 3
-#define OMAP4_LPDDR2IO2_GR5_I_MASK (0x7 << 3)
-#define OMAP4_LPDDR2IO2_GR5_WD_SHIFT 1
-#define OMAP4_LPDDR2IO2_GR5_WD_MASK (0x3 << 1)
-
-/* CONTROL_LPDDR2IO2_2 */
-#define OMAP4_LPDDR2IO2_GR11_SR_SHIFT 30
-#define OMAP4_LPDDR2IO2_GR11_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO2_GR11_I_SHIFT 27
-#define OMAP4_LPDDR2IO2_GR11_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO2_GR11_WD_SHIFT 25
-#define OMAP4_LPDDR2IO2_GR11_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO2_GR10_SR_SHIFT 22
-#define OMAP4_LPDDR2IO2_GR10_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO2_GR10_I_SHIFT 19
-#define OMAP4_LPDDR2IO2_GR10_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO2_GR10_WD_SHIFT 17
-#define OMAP4_LPDDR2IO2_GR10_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO2_GR9_SR_SHIFT 14
-#define OMAP4_LPDDR2IO2_GR9_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO2_GR9_I_SHIFT 11
-#define OMAP4_LPDDR2IO2_GR9_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO2_GR9_WD_SHIFT 9
-#define OMAP4_LPDDR2IO2_GR9_WD_MASK (0x3 << 9)
-
-/* CONTROL_LPDDR2IO2_3 */
-#define OMAP4_LPDDR22_VREF_CA_CCAP0_SHIFT 31
-#define OMAP4_LPDDR22_VREF_CA_CCAP0_MASK (1 << 31)
-#define OMAP4_LPDDR22_VREF_CA_CCAP1_SHIFT 30
-#define OMAP4_LPDDR22_VREF_CA_CCAP1_MASK (1 << 30)
-#define OMAP4_LPDDR22_VREF_CA_INT_CCAP0_SHIFT 29
-#define OMAP4_LPDDR22_VREF_CA_INT_CCAP0_MASK (1 << 29)
-#define OMAP4_LPDDR22_VREF_CA_INT_CCAP1_SHIFT 28
-#define OMAP4_LPDDR22_VREF_CA_INT_CCAP1_MASK (1 << 28)
-#define OMAP4_LPDDR22_VREF_CA_INT_TAP0_SHIFT 27
-#define OMAP4_LPDDR22_VREF_CA_INT_TAP0_MASK (1 << 27)
-#define OMAP4_LPDDR22_VREF_CA_INT_TAP1_SHIFT 26
-#define OMAP4_LPDDR22_VREF_CA_INT_TAP1_MASK (1 << 26)
-#define OMAP4_LPDDR22_VREF_CA_TAP0_SHIFT 25
-#define OMAP4_LPDDR22_VREF_CA_TAP0_MASK (1 << 25)
-#define OMAP4_LPDDR22_VREF_CA_TAP1_SHIFT 24
-#define OMAP4_LPDDR22_VREF_CA_TAP1_MASK (1 << 24)
-#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP0_SHIFT 23
-#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP0_MASK (1 << 23)
-#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP1_SHIFT 22
-#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP1_MASK (1 << 22)
-#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP0_SHIFT 21
-#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP0_MASK (1 << 21)
-#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP1_SHIFT 20
-#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP1_MASK (1 << 20)
-#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP0_SHIFT 19
-#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP0_MASK (1 << 19)
-#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP1_SHIFT 18
-#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP1_MASK (1 << 18)
-#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP0_SHIFT 17
-#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP0_MASK (1 << 17)
-#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP1_SHIFT 16
-#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP1_MASK (1 << 16)
-#define OMAP4_LPDDR22_VREF_DQ_CCAP0_SHIFT 15
-#define OMAP4_LPDDR22_VREF_DQ_CCAP0_MASK (1 << 15)
-#define OMAP4_LPDDR22_VREF_DQ_CCAP1_SHIFT 14
-#define OMAP4_LPDDR22_VREF_DQ_CCAP1_MASK (1 << 14)
-#define OMAP4_LPDDR22_VREF_DQ_TAP0_SHIFT 13
-#define OMAP4_LPDDR22_VREF_DQ_TAP0_MASK (1 << 13)
-#define OMAP4_LPDDR22_VREF_DQ_TAP1_SHIFT 12
-#define OMAP4_LPDDR22_VREF_DQ_TAP1_MASK (1 << 12)
-
-/* CONTROL_BUS_HOLD */
-#define OMAP4_ABE_DMIC_DIN3_EN_SHIFT 31
-#define OMAP4_ABE_DMIC_DIN3_EN_MASK (1 << 31)
-#define OMAP4_MCSPI1_CS3_EN_SHIFT 30
-#define OMAP4_MCSPI1_CS3_EN_MASK (1 << 30)
-
-/* CONTROL_C2C */
-#define OMAP4_MIRROR_MODE_EN_SHIFT 31
-#define OMAP4_MIRROR_MODE_EN_MASK (1 << 31)
-#define OMAP4_C2C_SPARE_SHIFT 24
-#define OMAP4_C2C_SPARE_MASK (0x7f << 24)
-
-/* CORE_CONTROL_SPARE_RW */
-#define OMAP4_CORE_CONTROL_SPARE_RW_SHIFT 0
-#define OMAP4_CORE_CONTROL_SPARE_RW_MASK (0xffffffff << 0)
-
-/* CORE_CONTROL_SPARE_R */
-#define OMAP4_CORE_CONTROL_SPARE_R_SHIFT 0
-#define OMAP4_CORE_CONTROL_SPARE_R_MASK (0xffffffff << 0)
-
-/* CORE_CONTROL_SPARE_R_C0 */
-#define OMAP4_CORE_CONTROL_SPARE_R_C0_SHIFT 31
-#define OMAP4_CORE_CONTROL_SPARE_R_C0_MASK (1 << 31)
-#define OMAP4_CORE_CONTROL_SPARE_R_C1_SHIFT 30
-#define OMAP4_CORE_CONTROL_SPARE_R_C1_MASK (1 << 30)
-#define OMAP4_CORE_CONTROL_SPARE_R_C2_SHIFT 29
-#define OMAP4_CORE_CONTROL_SPARE_R_C2_MASK (1 << 29)
-#define OMAP4_CORE_CONTROL_SPARE_R_C3_SHIFT 28
-#define OMAP4_CORE_CONTROL_SPARE_R_C3_MASK (1 << 28)
-#define OMAP4_CORE_CONTROL_SPARE_R_C4_SHIFT 27
-#define OMAP4_CORE_CONTROL_SPARE_R_C4_MASK (1 << 27)
-#define OMAP4_CORE_CONTROL_SPARE_R_C5_SHIFT 26
-#define OMAP4_CORE_CONTROL_SPARE_R_C5_MASK (1 << 26)
-#define OMAP4_CORE_CONTROL_SPARE_R_C6_SHIFT 25
-#define OMAP4_CORE_CONTROL_SPARE_R_C6_MASK (1 << 25)
-#define OMAP4_CORE_CONTROL_SPARE_R_C7_SHIFT 24
-#define OMAP4_CORE_CONTROL_SPARE_R_C7_MASK (1 << 24)
-
-/* CONTROL_EFUSE_1 */
-#define OMAP4_AVDAC_TRIM_BYTE3_SHIFT 24
-#define OMAP4_AVDAC_TRIM_BYTE3_MASK (0x7f << 24)
-#define OMAP4_AVDAC_TRIM_BYTE2_SHIFT 16
-#define OMAP4_AVDAC_TRIM_BYTE2_MASK (0xff << 16)
-#define OMAP4_AVDAC_TRIM_BYTE1_SHIFT 8
-#define OMAP4_AVDAC_TRIM_BYTE1_MASK (0xff << 8)
-#define OMAP4_AVDAC_TRIM_BYTE0_SHIFT 0
-#define OMAP4_AVDAC_TRIM_BYTE0_MASK (0xff << 0)
-
-/* CONTROL_EFUSE_2 */
-#define OMAP4_EFUSE_SMART2TEST_P0_SHIFT 31
-#define OMAP4_EFUSE_SMART2TEST_P0_MASK (1 << 31)
-#define OMAP4_EFUSE_SMART2TEST_P1_SHIFT 30
-#define OMAP4_EFUSE_SMART2TEST_P1_MASK (1 << 30)
-#define OMAP4_EFUSE_SMART2TEST_P2_SHIFT 29
-#define OMAP4_EFUSE_SMART2TEST_P2_MASK (1 << 29)
-#define OMAP4_EFUSE_SMART2TEST_P3_SHIFT 28
-#define OMAP4_EFUSE_SMART2TEST_P3_MASK (1 << 28)
-#define OMAP4_EFUSE_SMART2TEST_N0_SHIFT 27
-#define OMAP4_EFUSE_SMART2TEST_N0_MASK (1 << 27)
-#define OMAP4_EFUSE_SMART2TEST_N1_SHIFT 26
-#define OMAP4_EFUSE_SMART2TEST_N1_MASK (1 << 26)
-#define OMAP4_EFUSE_SMART2TEST_N2_SHIFT 25
-#define OMAP4_EFUSE_SMART2TEST_N2_MASK (1 << 25)
-#define OMAP4_EFUSE_SMART2TEST_N3_SHIFT 24
-#define OMAP4_EFUSE_SMART2TEST_N3_MASK (1 << 24)
-#define OMAP4_LPDDR2_PTV_N1_SHIFT 23
-#define OMAP4_LPDDR2_PTV_N1_MASK (1 << 23)
-#define OMAP4_LPDDR2_PTV_N2_SHIFT 22
-#define OMAP4_LPDDR2_PTV_N2_MASK (1 << 22)
-#define OMAP4_LPDDR2_PTV_N3_SHIFT 21
-#define OMAP4_LPDDR2_PTV_N3_MASK (1 << 21)
-#define OMAP4_LPDDR2_PTV_N4_SHIFT 20
-#define OMAP4_LPDDR2_PTV_N4_MASK (1 << 20)
-#define OMAP4_LPDDR2_PTV_N5_SHIFT 19
-#define OMAP4_LPDDR2_PTV_N5_MASK (1 << 19)
-#define OMAP4_LPDDR2_PTV_P1_SHIFT 18
-#define OMAP4_LPDDR2_PTV_P1_MASK (1 << 18)
-#define OMAP4_LPDDR2_PTV_P2_SHIFT 17
-#define OMAP4_LPDDR2_PTV_P2_MASK (1 << 17)
-#define OMAP4_LPDDR2_PTV_P3_SHIFT 16
-#define OMAP4_LPDDR2_PTV_P3_MASK (1 << 16)
-#define OMAP4_LPDDR2_PTV_P4_SHIFT 15
-#define OMAP4_LPDDR2_PTV_P4_MASK (1 << 15)
-#define OMAP4_LPDDR2_PTV_P5_SHIFT 14
-#define OMAP4_LPDDR2_PTV_P5_MASK (1 << 14)
-
-/* CONTROL_EFUSE_3 */
-#define OMAP4_STD_FUSE_SPARE_1_SHIFT 24
-#define OMAP4_STD_FUSE_SPARE_1_MASK (0xff << 24)
-#define OMAP4_STD_FUSE_SPARE_2_SHIFT 16
-#define OMAP4_STD_FUSE_SPARE_2_MASK (0xff << 16)
-#define OMAP4_STD_FUSE_SPARE_3_SHIFT 8
-#define OMAP4_STD_FUSE_SPARE_3_MASK (0xff << 8)
-#define OMAP4_STD_FUSE_SPARE_4_SHIFT 0
-#define OMAP4_STD_FUSE_SPARE_4_MASK (0xff << 0)
-
-/* CONTROL_EFUSE_4 */
-#define OMAP4_STD_FUSE_SPARE_5_SHIFT 24
-#define OMAP4_STD_FUSE_SPARE_5_MASK (0xff << 24)
-#define OMAP4_STD_FUSE_SPARE_6_SHIFT 16
-#define OMAP4_STD_FUSE_SPARE_6_MASK (0xff << 16)
-#define OMAP4_STD_FUSE_SPARE_7_SHIFT 8
-#define OMAP4_STD_FUSE_SPARE_7_MASK (0xff << 8)
-#define OMAP4_STD_FUSE_SPARE_8_SHIFT 0
-#define OMAP4_STD_FUSE_SPARE_8_MASK (0xff << 0)
-
-#endif
diff --git a/arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h b/arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h
deleted file mode 100644
index 17c9b37042c0..000000000000
--- a/arch/arm/mach-omap2/ctrl_module_pad_wkup_44xx.h
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * OMAP44xx CTRL_MODULE_PAD_WKUP registers and bitfields
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_WKUP_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_WKUP_44XX_H
-
-
-/* Base address */
-#define OMAP4_CTRL_MODULE_PAD_WKUP 0x4a31e000
-
-/* Registers offset */
-#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_REVISION 0x0000
-#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_HWINFO 0x0004
-#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_SYSCONFIG 0x0010
-#define OMAP4_CTRL_MODULE_PAD_WKUP_PADCONF_WAKEUPEVENT_0 0x007c
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SMART1NOPMIO_PADCONF_0 0x05a0
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SMART1NOPMIO_PADCONF_1 0x05a4
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_PADCONF_MODE 0x05a8
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_XTAL_OSCILLATOR 0x05ac
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_USIMIO 0x0600
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2 0x0604
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_JTAG 0x0608
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SYS 0x060c
-#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_RW 0x0614
-#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_R 0x0618
-#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_R_C0 0x061c
-
-/* Registers shifts and masks */
-
-/* IP_REVISION */
-#define OMAP4_IP_REV_SCHEME_SHIFT 30
-#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30)
-#define OMAP4_IP_REV_FUNC_SHIFT 16
-#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16)
-#define OMAP4_IP_REV_RTL_SHIFT 11
-#define OMAP4_IP_REV_RTL_MASK (0x1f << 11)
-#define OMAP4_IP_REV_MAJOR_SHIFT 8
-#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8)
-#define OMAP4_IP_REV_CUSTOM_SHIFT 6
-#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6)
-#define OMAP4_IP_REV_MINOR_SHIFT 0
-#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0)
-
-/* IP_HWINFO */
-#define OMAP4_IP_HWINFO_SHIFT 0
-#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0)
-
-/* IP_SYSCONFIG */
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2)
-
-/* PADCONF_WAKEUPEVENT_0 */
-#define OMAP4_JTAG_TDO_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_JTAG_TDO_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_JTAG_TDI_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_JTAG_TDI_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_JTAG_TMS_TMSC_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_JTAG_TMS_TMSC_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_JTAG_RTCK_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_JTAG_RTCK_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_JTAG_TCK_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_JTAG_TCK_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_JTAG_NTRST_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_JTAG_NTRST_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_SYS_BOOT7_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_SYS_BOOT7_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_SYS_BOOT6_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_SYS_BOOT6_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_SYS_PWRON_RESET_OUT_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_SYS_PWRON_RESET_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_SYS_PWR_REQ_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_SYS_PWR_REQ_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_SYS_NRESWARM_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_SYS_NRESWARM_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_SYS_32K_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_SYS_32K_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_FREF_CLK4_OUT_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_FREF_CLK4_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_FREF_CLK4_REQ_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_FREF_CLK4_REQ_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_FREF_CLK3_OUT_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_FREF_CLK3_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_FREF_CLK3_REQ_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_FREF_CLK3_REQ_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_FREF_CLK0_OUT_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_FREF_CLK0_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_FREF_CLK_IOREQ_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_FREF_CLK_IOREQ_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_SR_SDA_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_SR_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_SR_SCL_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_SR_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_SIM_PWRCTRL_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_SIM_PWRCTRL_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_SIM_CD_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_SIM_CD_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_SIM_RESET_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_SIM_RESET_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_SIM_CLK_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_SIM_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_SIM_IO_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_SIM_IO_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* CONTROL_SMART1NOPMIO_PADCONF_0 */
-#define OMAP4_FREF_DR0_SC_SHIFT 30
-#define OMAP4_FREF_DR0_SC_MASK (0x3 << 30)
-#define OMAP4_FREF_DR1_SC_SHIFT 28
-#define OMAP4_FREF_DR1_SC_MASK (0x3 << 28)
-#define OMAP4_FREF_DR4_SC_SHIFT 26
-#define OMAP4_FREF_DR4_SC_MASK (0x3 << 26)
-#define OMAP4_FREF_DR5_SC_SHIFT 24
-#define OMAP4_FREF_DR5_SC_MASK (0x3 << 24)
-#define OMAP4_FREF_DR6_SC_SHIFT 22
-#define OMAP4_FREF_DR6_SC_MASK (0x3 << 22)
-#define OMAP4_FREF_DR7_SC_SHIFT 20
-#define OMAP4_FREF_DR7_SC_MASK (0x3 << 20)
-#define OMAP4_GPIO_DR7_SC_SHIFT 18
-#define OMAP4_GPIO_DR7_SC_MASK (0x3 << 18)
-#define OMAP4_DPM_DR0_SC_SHIFT 14
-#define OMAP4_DPM_DR0_SC_MASK (0x3 << 14)
-#define OMAP4_SIM_DR0_SC_SHIFT 12
-#define OMAP4_SIM_DR0_SC_MASK (0x3 << 12)
-
-/* CONTROL_SMART1NOPMIO_PADCONF_1 */
-#define OMAP4_FREF_DR0_LB_SHIFT 30
-#define OMAP4_FREF_DR0_LB_MASK (0x3 << 30)
-#define OMAP4_FREF_DR1_LB_SHIFT 28
-#define OMAP4_FREF_DR1_LB_MASK (0x3 << 28)
-#define OMAP4_FREF_DR4_LB_SHIFT 26
-#define OMAP4_FREF_DR4_LB_MASK (0x3 << 26)
-#define OMAP4_FREF_DR5_LB_SHIFT 24
-#define OMAP4_FREF_DR5_LB_MASK (0x3 << 24)
-#define OMAP4_FREF_DR6_LB_SHIFT 22
-#define OMAP4_FREF_DR6_LB_MASK (0x3 << 22)
-#define OMAP4_FREF_DR7_LB_SHIFT 20
-#define OMAP4_FREF_DR7_LB_MASK (0x3 << 20)
-#define OMAP4_GPIO_DR7_LB_SHIFT 18
-#define OMAP4_GPIO_DR7_LB_MASK (0x3 << 18)
-#define OMAP4_DPM_DR0_LB_SHIFT 14
-#define OMAP4_DPM_DR0_LB_MASK (0x3 << 14)
-#define OMAP4_SIM_DR0_LB_SHIFT 12
-#define OMAP4_SIM_DR0_LB_MASK (0x3 << 12)
-
-/* CONTROL_PADCONF_MODE */
-#define OMAP4_VDDS_DV_FREF_SHIFT 31
-#define OMAP4_VDDS_DV_FREF_MASK (1 << 31)
-#define OMAP4_VDDS_DV_BANK2_SHIFT 30
-#define OMAP4_VDDS_DV_BANK2_MASK (1 << 30)
-
-/* CONTROL_XTAL_OSCILLATOR */
-#define OMAP4_OSCILLATOR_BOOST_SHIFT 31
-#define OMAP4_OSCILLATOR_BOOST_MASK (1 << 31)
-#define OMAP4_OSCILLATOR_OS_OUT_SHIFT 30
-#define OMAP4_OSCILLATOR_OS_OUT_MASK (1 << 30)
-
-/* CONTROL_USIMIO */
-#define OMAP4_PAD_USIM_CLK_LOW_SHIFT 31
-#define OMAP4_PAD_USIM_CLK_LOW_MASK (1 << 31)
-#define OMAP4_PAD_USIM_RST_LOW_SHIFT 29
-#define OMAP4_PAD_USIM_RST_LOW_MASK (1 << 29)
-#define OMAP4_USIM_PWRDNZ_SHIFT 28
-#define OMAP4_USIM_PWRDNZ_MASK (1 << 28)
-
-/* CONTROL_I2C_2 */
-#define OMAP4_SR_SDA_GLFENB_SHIFT 31
-#define OMAP4_SR_SDA_GLFENB_MASK (1 << 31)
-#define OMAP4_SR_SDA_LOAD_BITS_SHIFT 29
-#define OMAP4_SR_SDA_LOAD_BITS_MASK (0x3 << 29)
-#define OMAP4_SR_SDA_PULLUPRESX_SHIFT 28
-#define OMAP4_SR_SDA_PULLUPRESX_MASK (1 << 28)
-#define OMAP4_SR_SCL_GLFENB_SHIFT 27
-#define OMAP4_SR_SCL_GLFENB_MASK (1 << 27)
-#define OMAP4_SR_SCL_LOAD_BITS_SHIFT 25
-#define OMAP4_SR_SCL_LOAD_BITS_MASK (0x3 << 25)
-#define OMAP4_SR_SCL_PULLUPRESX_SHIFT 24
-#define OMAP4_SR_SCL_PULLUPRESX_MASK (1 << 24)
-
-/* CONTROL_JTAG */
-#define OMAP4_JTAG_NTRST_EN_SHIFT 31
-#define OMAP4_JTAG_NTRST_EN_MASK (1 << 31)
-#define OMAP4_JTAG_TCK_EN_SHIFT 30
-#define OMAP4_JTAG_TCK_EN_MASK (1 << 30)
-#define OMAP4_JTAG_RTCK_EN_SHIFT 29
-#define OMAP4_JTAG_RTCK_EN_MASK (1 << 29)
-#define OMAP4_JTAG_TDI_EN_SHIFT 28
-#define OMAP4_JTAG_TDI_EN_MASK (1 << 28)
-#define OMAP4_JTAG_TDO_EN_SHIFT 27
-#define OMAP4_JTAG_TDO_EN_MASK (1 << 27)
-
-/* CONTROL_SYS */
-#define OMAP4_SYS_NRESWARM_PIPU_SHIFT 31
-#define OMAP4_SYS_NRESWARM_PIPU_MASK (1 << 31)
-
-/* WKUP_CONTROL_SPARE_RW */
-#define OMAP4_WKUP_CONTROL_SPARE_RW_SHIFT 0
-#define OMAP4_WKUP_CONTROL_SPARE_RW_MASK (0xffffffff << 0)
-
-/* WKUP_CONTROL_SPARE_R */
-#define OMAP4_WKUP_CONTROL_SPARE_R_SHIFT 0
-#define OMAP4_WKUP_CONTROL_SPARE_R_MASK (0xffffffff << 0)
-
-/* WKUP_CONTROL_SPARE_R_C0 */
-#define OMAP4_WKUP_CONTROL_SPARE_R_C0_SHIFT 31
-#define OMAP4_WKUP_CONTROL_SPARE_R_C0_MASK (1 << 31)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C1_SHIFT 30
-#define OMAP4_WKUP_CONTROL_SPARE_R_C1_MASK (1 << 30)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C2_SHIFT 29
-#define OMAP4_WKUP_CONTROL_SPARE_R_C2_MASK (1 << 29)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C3_SHIFT 28
-#define OMAP4_WKUP_CONTROL_SPARE_R_C3_MASK (1 << 28)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C4_SHIFT 27
-#define OMAP4_WKUP_CONTROL_SPARE_R_C4_MASK (1 << 27)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C5_SHIFT 26
-#define OMAP4_WKUP_CONTROL_SPARE_R_C5_MASK (1 << 26)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C6_SHIFT 25
-#define OMAP4_WKUP_CONTROL_SPARE_R_C6_MASK (1 << 25)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C7_SHIFT 24
-#define OMAP4_WKUP_CONTROL_SPARE_R_C7_MASK (1 << 24)
-
-#endif
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 6d7ba37e2257..cd5f3a0b97bd 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -28,11 +28,8 @@
#include <linux/bitops.h>
#include <linux/clkdev.h>
-#include "soc.h"
#include "clockdomain.h"
#include "clock.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-34xx.h"
/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
#define DPLL_AUTOIDLE_DISABLE 0x0
@@ -310,7 +307,7 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
* Set jitter correction. Jitter correction applicable for OMAP343X
* only since freqsel field is no longer present on other devices.
*/
- if (cpu_is_omap343x()) {
+ if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
v = omap2_clk_readl(clk, dd->control_reg);
v &= ~dd->freqsel_mask;
v |= freqsel << __ffs(dd->freqsel_mask);
@@ -512,7 +509,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
return -EINVAL;
/* Freqsel is available only on OMAP343X devices */
- if (cpu_is_omap343x()) {
+ if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
freqsel = _omap3_dpll_compute_freqsel(clk,
dd->last_rounded_n);
WARN_ON(!freqsel);
diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
index 52f9438b92f2..4613f1e86988 100644
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ b/arch/arm/mach-omap2/dpll44xx.c
@@ -15,10 +15,7 @@
#include <linux/io.h>
#include <linux/bitops.h>
-#include "soc.h"
#include "clock.h"
-#include "clock44xx.h"
-#include "cm-regbits-44xx.h"
/*
* Maximum DPLL input frequency (FINT) and output frequency (FOUT) that
@@ -29,13 +26,23 @@
#define OMAP4_DPLL_LP_FINT_MAX 1000000
#define OMAP4_DPLL_LP_FOUT_MAX 100000000
+/*
+ * Bitfield declarations
+ */
+#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK (1 << 8)
+#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK (1 << 10)
+#define OMAP4430_DPLL_REGM4XEN_MASK (1 << 11)
+
+/* Static rate multiplier for OMAP4 REGM4XEN clocks */
+#define OMAP4430_REGM4XEN_MULT 4
+
/* Supported only on OMAP4 */
int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk)
{
u32 v;
u32 mask;
- if (!clk || !clk->clksel_reg || !cpu_is_omap44xx())
+ if (!clk || !clk->clksel_reg)
return -EINVAL;
mask = clk->flags & CLOCK_CLKOUTX2 ?
@@ -54,7 +61,7 @@ void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk)
u32 v;
u32 mask;
- if (!clk || !clk->clksel_reg || !cpu_is_omap44xx())
+ if (!clk || !clk->clksel_reg)
return;
mask = clk->flags & CLOCK_CLKOUTX2 ?
@@ -72,7 +79,7 @@ void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk)
u32 v;
u32 mask;
- if (!clk || !clk->clksel_reg || !cpu_is_omap44xx())
+ if (!clk || !clk->clksel_reg)
return;
mask = clk->flags & CLOCK_CLKOUTX2 ?
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index 93914d220069..8897ad7035fd 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -24,25 +24,6 @@
/* minimum size for IO mapping */
#define NAND_IO_SIZE 4
-static struct resource gpmc_nand_resource[] = {
- {
- .flags = IORESOURCE_MEM,
- },
- {
- .flags = IORESOURCE_IRQ,
- },
- {
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device gpmc_nand_device = {
- .name = "omap2-nand",
- .id = 0,
- .num_resources = ARRAY_SIZE(gpmc_nand_resource),
- .resource = gpmc_nand_resource,
-};
-
static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
{
/* platforms which support all ECC schemes */
@@ -95,43 +76,41 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
{
int err = 0;
struct gpmc_settings s;
- struct device *dev = &gpmc_nand_device.dev;
-
- memset(&s, 0, sizeof(struct gpmc_settings));
+ struct platform_device *pdev;
+ struct resource gpmc_nand_res[] = {
+ { .flags = IORESOURCE_MEM, },
+ { .flags = IORESOURCE_IRQ, },
+ { .flags = IORESOURCE_IRQ, },
+ };
- gpmc_nand_device.dev.platform_data = gpmc_nand_data;
+ BUG_ON(gpmc_nand_data->cs >= GPMC_CS_NUM);
err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
- (unsigned long *)&gpmc_nand_resource[0].start);
+ (unsigned long *)&gpmc_nand_res[0].start);
if (err < 0) {
- dev_err(dev, "Cannot request GPMC CS %d, error %d\n",
- gpmc_nand_data->cs, err);
+ pr_err("omap2-gpmc: Cannot request GPMC CS %d, error %d\n",
+ gpmc_nand_data->cs, err);
return err;
}
-
- gpmc_nand_resource[0].end = gpmc_nand_resource[0].start +
- NAND_IO_SIZE - 1;
-
- gpmc_nand_resource[1].start =
- gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
- gpmc_nand_resource[2].start =
- gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
+ gpmc_nand_res[0].end = gpmc_nand_res[0].start + NAND_IO_SIZE - 1;
+ gpmc_nand_res[1].start = gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
+ gpmc_nand_res[2].start = gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
if (gpmc_t) {
err = gpmc_cs_set_timings(gpmc_nand_data->cs, gpmc_t);
if (err < 0) {
- dev_err(dev, "Unable to set gpmc timings: %d\n", err);
+ pr_err("omap2-gpmc: Unable to set gpmc timings: %d\n", err);
return err;
}
}
+ memset(&s, 0, sizeof(struct gpmc_settings));
if (gpmc_nand_data->of_node)
gpmc_read_settings_dt(gpmc_nand_data->of_node, &s);
else
gpmc_set_legacy(gpmc_nand_data, &s);
s.device_nand = true;
-
err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s);
if (err < 0)
goto out_free_cs;
@@ -143,18 +122,34 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) {
- dev_err(dev, "Unsupported NAND ECC scheme selected\n");
- return -EINVAL;
+ pr_err("omap2-nand: Unsupported NAND ECC scheme selected\n");
+ err = -EINVAL;
+ goto out_free_cs;
}
- err = platform_device_register(&gpmc_nand_device);
- if (err < 0) {
- dev_err(dev, "Unable to register NAND device\n");
- goto out_free_cs;
+
+ pdev = platform_device_alloc("omap2-nand", gpmc_nand_data->cs);
+ if (pdev) {
+ err = platform_device_add_resources(pdev, gpmc_nand_res,
+ ARRAY_SIZE(gpmc_nand_res));
+ if (!err)
+ pdev->dev.platform_data = gpmc_nand_data;
+ } else {
+ err = -ENOMEM;
+ }
+ if (err)
+ goto out_free_pdev;
+
+ err = platform_device_add(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "Unable to register NAND device\n");
+ goto out_free_pdev;
}
return 0;
+out_free_pdev:
+ platform_device_put(pdev);
out_free_cs:
gpmc_cs_free(gpmc_nand_data->cs);
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 8f559450c876..1fae5c123f79 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -728,6 +728,8 @@ int __init omap_clk_init(void)
if (!omap_clk_soc_init)
return 0;
+ ti_clk_init_features();
+
ret = of_prcm_init();
if (!ret)
ret = omap_clk_soc_init();
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index a5ea988ff340..d76694b7a591 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -75,9 +75,9 @@ static int omap2_enter_full_retention(void)
/* Clear old wake-up events */
/* REVISIT: These write to reserved bits? */
- omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
- omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
- omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+ omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+ omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
+ omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
@@ -104,23 +104,18 @@ no_sleep:
clk_enable(osc_ck);
/* clear CORE wake-up events */
- omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
- omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+ omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+ omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
/* wakeup domain events - bit 1: GPT1, bit5 GPIO */
- omap2_prm_clear_mod_reg_bits(0x4 | 0x1, WKUP_MOD, PM_WKST);
+ omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, 0x4 | 0x1);
/* MPU domain wake events */
- l = omap2_prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
- if (l & 0x01)
- omap2_prm_write_mod_reg(0x01, OCP_MOD,
- OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
- if (l & 0x20)
- omap2_prm_write_mod_reg(0x20, OCP_MOD,
- OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+ omap2xxx_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET,
+ 0x1);
- /* Mask future PRCM-to-MPU interrupts */
- omap2_prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+ omap2xxx_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET,
+ 0x20);
pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_ON);
@@ -148,9 +143,9 @@ static void omap2_enter_mpu_retention(void)
* it is in retention mode. */
if (omap2_allow_mpu_retention()) {
/* REVISIT: These write to reserved bits? */
- omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
- omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
- omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+ omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+ omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
+ omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
/* Try to enter MPU retention */
pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 507d8eeaab95..3f80929a5f7e 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -133,60 +133,13 @@ static void omap3_save_secure_ram_context(void)
}
}
-/*
- * PRCM Interrupt Handler Helper Function
- *
- * The purpose of this function is to clear any wake-up events latched
- * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
- * may occur whilst attempting to clear a PM_WKST_x register and thus
- * set another bit in this register. A while loop is used to ensure
- * that any peripheral wake-up events occurring while attempting to
- * clear the PM_WKST_x are detected and cleared.
- */
-static int prcm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
-{
- u32 wkst, fclk, iclk, clken;
- u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
- u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
- u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
- u16 grpsel_off = (regs == 3) ?
- OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
- int c = 0;
-
- wkst = omap2_prm_read_mod_reg(module, wkst_off);
- wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
- wkst &= ~ignore_bits;
- if (wkst) {
- iclk = omap2_cm_read_mod_reg(module, iclk_off);
- fclk = omap2_cm_read_mod_reg(module, fclk_off);
- while (wkst) {
- clken = wkst;
- omap2_cm_set_mod_reg_bits(clken, module, iclk_off);
- /*
- * For USBHOST, we don't know whether HOST1 or
- * HOST2 woke us up, so enable both f-clocks
- */
- if (module == OMAP3430ES2_USBHOST_MOD)
- clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
- omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
- omap2_prm_write_mod_reg(wkst, module, wkst_off);
- wkst = omap2_prm_read_mod_reg(module, wkst_off);
- wkst &= ~ignore_bits;
- c++;
- }
- omap2_cm_write_mod_reg(iclk, module, iclk_off);
- omap2_cm_write_mod_reg(fclk, module, fclk_off);
- }
-
- return c;
-}
-
static irqreturn_t _prcm_int_handle_io(int irq, void *unused)
{
int c;
- c = prcm_clear_mod_irqs(WKUP_MOD, 1,
- ~(OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK));
+ c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1,
+ ~(OMAP3430_ST_IO_MASK |
+ OMAP3430_ST_IO_CHAIN_MASK));
return c ? IRQ_HANDLED : IRQ_NONE;
}
@@ -200,13 +153,14 @@ static irqreturn_t _prcm_int_handle_wakeup(int irq, void *unused)
* these are handled in a separate handler to avoid acking
* IO events before parsing in mux code
*/
- c = prcm_clear_mod_irqs(WKUP_MOD, 1,
- OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK);
- c += prcm_clear_mod_irqs(CORE_MOD, 1, 0);
- c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0);
+ c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1,
+ OMAP3430_ST_IO_MASK |
+ OMAP3430_ST_IO_CHAIN_MASK);
+ c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 1, 0);
+ c += omap3xxx_prm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0);
if (omap_rev() > OMAP3430_REV_ES1_0) {
- c += prcm_clear_mod_irqs(CORE_MOD, 3, 0);
- c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0);
+ c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 3, 0);
+ c += omap3xxx_prm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0);
}
return c ? IRQ_HANDLED : IRQ_NONE;
@@ -399,159 +353,11 @@ restore:
#define omap3_pm_suspend NULL
#endif /* CONFIG_SUSPEND */
-
-/**
- * omap3_iva_idle(): ensure IVA is in idle so it can be put into
- * retention
- *
- * In cases where IVA2 is activated by bootcode, it may prevent
- * full-chip retention or off-mode because it is not idle. This
- * function forces the IVA2 into idle state so it can go
- * into retention/off and thus allow full-chip retention/off.
- *
- **/
-static void __init omap3_iva_idle(void)
-{
- /* ensure IVA2 clock is disabled */
- omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
-
- /* if no clock activity, nothing else to do */
- if (!(omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
- OMAP3430_CLKACTIVITY_IVA2_MASK))
- return;
-
- /* Reset IVA2 */
- omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
- OMAP3430_RST2_IVA2_MASK |
- OMAP3430_RST3_IVA2_MASK,
- OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-
- /* Enable IVA2 clock */
- omap2_cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK,
- OMAP3430_IVA2_MOD, CM_FCLKEN);
-
- /* Set IVA2 boot mode to 'idle' */
- omap3_ctrl_set_iva_bootmode_idle();
-
- /* Un-reset IVA2 */
- omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-
- /* Disable IVA2 clock */
- omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
-
- /* Reset IVA2 */
- omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
- OMAP3430_RST2_IVA2_MASK |
- OMAP3430_RST3_IVA2_MASK,
- OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-}
-
-static void __init omap3_d2d_idle(void)
-{
- u16 mask, padconf;
-
- /* In a stand alone OMAP3430 where there is not a stacked
- * modem for the D2D Idle Ack and D2D MStandby must be pulled
- * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
- * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. */
- mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
- padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
- padconf |= mask;
- omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
-
- padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
- padconf |= mask;
- omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
-
- /* reset modem */
- omap2_prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK |
- OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK,
- CORE_MOD, OMAP2_RM_RSTCTRL);
- omap2_prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL);
-}
-
static void __init prcm_setup_regs(void)
{
- u32 omap3630_en_uart4_mask = cpu_is_omap3630() ?
- OMAP3630_EN_UART4_MASK : 0;
- u32 omap3630_grpsel_uart4_mask = cpu_is_omap3630() ?
- OMAP3630_GRPSEL_UART4_MASK : 0;
-
- /* XXX This should be handled by hwmod code or SCM init code */
- omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
-
- /*
- * Enable control of expternal oscillator through
- * sys_clkreq. In the long run clock framework should
- * take care of this.
- */
- omap2_prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
- 1 << OMAP_AUTOEXTCLKMODE_SHIFT,
- OMAP3430_GR_MOD,
- OMAP3_PRM_CLKSRC_CTRL_OFFSET);
-
- /* setup wakup source */
- omap2_prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK |
- OMAP3430_EN_GPT1_MASK | OMAP3430_EN_GPT12_MASK,
- WKUP_MOD, PM_WKEN);
- /* No need to write EN_IO, that is always enabled */
- omap2_prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK |
- OMAP3430_GRPSEL_GPT1_MASK |
- OMAP3430_GRPSEL_GPT12_MASK,
- WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
-
- /* Enable PM_WKEN to support DSS LPR */
- omap2_prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK,
- OMAP3430_DSS_MOD, PM_WKEN);
-
- /* Enable wakeups in PER */
- omap2_prm_write_mod_reg(omap3630_en_uart4_mask |
- OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK |
- OMAP3430_EN_GPIO4_MASK | OMAP3430_EN_GPIO5_MASK |
- OMAP3430_EN_GPIO6_MASK | OMAP3430_EN_UART3_MASK |
- OMAP3430_EN_MCBSP2_MASK | OMAP3430_EN_MCBSP3_MASK |
- OMAP3430_EN_MCBSP4_MASK,
- OMAP3430_PER_MOD, PM_WKEN);
- /* and allow them to wake up MPU */
- omap2_prm_write_mod_reg(omap3630_grpsel_uart4_mask |
- OMAP3430_GRPSEL_GPIO2_MASK |
- OMAP3430_GRPSEL_GPIO3_MASK |
- OMAP3430_GRPSEL_GPIO4_MASK |
- OMAP3430_GRPSEL_GPIO5_MASK |
- OMAP3430_GRPSEL_GPIO6_MASK |
- OMAP3430_GRPSEL_UART3_MASK |
- OMAP3430_GRPSEL_MCBSP2_MASK |
- OMAP3430_GRPSEL_MCBSP3_MASK |
- OMAP3430_GRPSEL_MCBSP4_MASK,
- OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
-
- /* Don't attach IVA interrupts */
- if (omap3_has_iva()) {
- omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
- omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
- omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
- omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD,
- OMAP3430_PM_IVAGRPSEL);
- }
-
- /* Clear any pending 'reset' flags */
- omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST);
- omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP2_RM_RSTST);
- omap2_prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, OMAP2_RM_RSTST);
- omap2_prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, OMAP2_RM_RSTST);
- omap2_prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, OMAP2_RM_RSTST);
- omap2_prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, OMAP2_RM_RSTST);
- omap2_prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, OMAP2_RM_RSTST);
-
- /* Clear any pending PRCM interrupts */
- omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
-
- /*
- * We need to idle iva2_pwrdm even on am3703 with no iva2.
- */
- omap3_iva_idle();
+ omap3_ctrl_init();
- omap3_d2d_idle();
+ omap3_prm_init_pm(cpu_is_omap3630(), omap3_has_iva());
}
void omap3_pm_off_mode_enable(int enable)
diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c
index a3a3cca2bcc4..86958050547a 100644
--- a/arch/arm/mach-omap2/prm2xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx.c
@@ -114,6 +114,24 @@ void omap2xxx_prm_dpll_reset(void)
omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTCTRL);
}
+/**
+ * omap2xxx_prm_clear_mod_irqs - clear wakeup status bits for a module
+ * @module: PRM module to clear wakeups from
+ * @regs: register offset to clear
+ * @wkst_mask: wakeup status mask to clear
+ *
+ * Clears wakeup status bits for a given module, so that the device can
+ * re-enter idle.
+ */
+void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
+{
+ u32 wkst;
+
+ wkst = omap2_prm_read_mod_reg(module, regs);
+ wkst &= wkst_mask;
+ omap2_prm_write_mod_reg(wkst, module, regs);
+}
+
int omap2xxx_clkdm_sleep(struct clockdomain *clkdm)
{
omap2_prm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h
index d2cb6365716f..d73414139292 100644
--- a/arch/arm/mach-omap2/prm2xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx.h
@@ -125,6 +125,7 @@ extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm);
extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
extern void omap2xxx_prm_dpll_reset(void);
+void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
extern int __init omap2xxx_prm_init(void);
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 4bd7a2dca8af..2458be6fc67b 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -26,6 +26,8 @@
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
+#include "cm3xxx.h"
+#include "cm-regbits-34xx.h"
static const struct omap_prcm_irq omap3_prcm_irqs[] = {
OMAP_PRCM_IRQ("wkup", 0, 0),
@@ -206,6 +208,167 @@ void omap3xxx_prm_restore_irqen(u32 *saved_mask)
}
/**
+ * omap3xxx_prm_clear_mod_irqs - clear wake-up events from PRCM interrupt
+ * @module: PRM module to clear wakeups from
+ * @regs: register set to clear, 1 or 3
+ * @ignore_bits: wakeup status bits to ignore
+ *
+ * The purpose of this function is to clear any wake-up events latched
+ * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
+ * may occur whilst attempting to clear a PM_WKST_x register and thus
+ * set another bit in this register. A while loop is used to ensure
+ * that any peripheral wake-up events occurring while attempting to
+ * clear the PM_WKST_x are detected and cleared.
+ */
+int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
+{
+ u32 wkst, fclk, iclk, clken;
+ u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
+ u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
+ u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
+ u16 grpsel_off = (regs == 3) ?
+ OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
+ int c = 0;
+
+ wkst = omap2_prm_read_mod_reg(module, wkst_off);
+ wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
+ wkst &= ~ignore_bits;
+ if (wkst) {
+ iclk = omap2_cm_read_mod_reg(module, iclk_off);
+ fclk = omap2_cm_read_mod_reg(module, fclk_off);
+ while (wkst) {
+ clken = wkst;
+ omap2_cm_set_mod_reg_bits(clken, module, iclk_off);
+ /*
+ * For USBHOST, we don't know whether HOST1 or
+ * HOST2 woke us up, so enable both f-clocks
+ */
+ if (module == OMAP3430ES2_USBHOST_MOD)
+ clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
+ omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
+ omap2_prm_write_mod_reg(wkst, module, wkst_off);
+ wkst = omap2_prm_read_mod_reg(module, wkst_off);
+ wkst &= ~ignore_bits;
+ c++;
+ }
+ omap2_cm_write_mod_reg(iclk, module, iclk_off);
+ omap2_cm_write_mod_reg(fclk, module, fclk_off);
+ }
+
+ return c;
+}
+
+/**
+ * omap3_prm_reset_modem - toggle reset signal for modem
+ *
+ * Toggles the reset signal to modem IP block. Required to allow
+ * OMAP3430 without stacked modem to idle properly.
+ */
+void __init omap3_prm_reset_modem(void)
+{
+ omap2_prm_write_mod_reg(
+ OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK |
+ OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK,
+ CORE_MOD, OMAP2_RM_RSTCTRL);
+ omap2_prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL);
+}
+
+/**
+ * omap3_prm_init_pm - initialize PM related registers for PRM
+ * @has_uart4: SoC has UART4
+ * @has_iva: SoC has IVA
+ *
+ * Initializes PRM registers for PM use. Called from PM init.
+ */
+void __init omap3_prm_init_pm(bool has_uart4, bool has_iva)
+{
+ u32 en_uart4_mask;
+ u32 grpsel_uart4_mask;
+
+ /*
+ * Enable control of expternal oscillator through
+ * sys_clkreq. In the long run clock framework should
+ * take care of this.
+ */
+ omap2_prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
+ 1 << OMAP_AUTOEXTCLKMODE_SHIFT,
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_CLKSRC_CTRL_OFFSET);
+
+ /* setup wakup source */
+ omap2_prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK |
+ OMAP3430_EN_GPT1_MASK | OMAP3430_EN_GPT12_MASK,
+ WKUP_MOD, PM_WKEN);
+ /* No need to write EN_IO, that is always enabled */
+ omap2_prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK |
+ OMAP3430_GRPSEL_GPT1_MASK |
+ OMAP3430_GRPSEL_GPT12_MASK,
+ WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
+
+ /* Enable PM_WKEN to support DSS LPR */
+ omap2_prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK,
+ OMAP3430_DSS_MOD, PM_WKEN);
+
+ if (has_uart4) {
+ en_uart4_mask = OMAP3630_EN_UART4_MASK;
+ grpsel_uart4_mask = OMAP3630_GRPSEL_UART4_MASK;
+ }
+
+ /* Enable wakeups in PER */
+ omap2_prm_write_mod_reg(en_uart4_mask |
+ OMAP3430_EN_GPIO2_MASK |
+ OMAP3430_EN_GPIO3_MASK |
+ OMAP3430_EN_GPIO4_MASK |
+ OMAP3430_EN_GPIO5_MASK |
+ OMAP3430_EN_GPIO6_MASK |
+ OMAP3430_EN_UART3_MASK |
+ OMAP3430_EN_MCBSP2_MASK |
+ OMAP3430_EN_MCBSP3_MASK |
+ OMAP3430_EN_MCBSP4_MASK,
+ OMAP3430_PER_MOD, PM_WKEN);
+
+ /* and allow them to wake up MPU */
+ omap2_prm_write_mod_reg(grpsel_uart4_mask |
+ OMAP3430_GRPSEL_GPIO2_MASK |
+ OMAP3430_GRPSEL_GPIO3_MASK |
+ OMAP3430_GRPSEL_GPIO4_MASK |
+ OMAP3430_GRPSEL_GPIO5_MASK |
+ OMAP3430_GRPSEL_GPIO6_MASK |
+ OMAP3430_GRPSEL_UART3_MASK |
+ OMAP3430_GRPSEL_MCBSP2_MASK |
+ OMAP3430_GRPSEL_MCBSP3_MASK |
+ OMAP3430_GRPSEL_MCBSP4_MASK,
+ OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
+
+ /* Don't attach IVA interrupts */
+ if (has_iva) {
+ omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+ omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+ omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+ omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD,
+ OMAP3430_PM_IVAGRPSEL);
+ }
+
+ /* Clear any pending 'reset' flags */
+ omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST);
+ omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP2_RM_RSTST);
+ omap2_prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, OMAP2_RM_RSTST);
+ omap2_prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, OMAP2_RM_RSTST);
+ omap2_prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, OMAP2_RM_RSTST);
+ omap2_prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, OMAP2_RM_RSTST);
+ omap2_prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD,
+ OMAP2_RM_RSTST);
+
+ /* Clear any pending PRCM interrupts */
+ omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+ /* We need to idle iva2_pwrdm even on am3703 with no iva2. */
+ omap3xxx_prm_iva_idle();
+
+ omap3_prm_reset_modem();
+}
+
+/**
* omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
*
* Clear any previously-latched I/O wakeup events and ensure that the
@@ -276,6 +439,76 @@ static u32 omap3xxx_prm_read_reset_sources(void)
return r;
}
+/**
+ * omap3xxx_prm_iva_idle - ensure IVA is in idle so it can be put into retention
+ *
+ * In cases where IVA2 is activated by bootcode, it may prevent
+ * full-chip retention or off-mode because it is not idle. This
+ * function forces the IVA2 into idle state so it can go
+ * into retention/off and thus allow full-chip retention/off.
+ */
+void omap3xxx_prm_iva_idle(void)
+{
+ /* ensure IVA2 clock is disabled */
+ omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+ /* if no clock activity, nothing else to do */
+ if (!(omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
+ OMAP3430_CLKACTIVITY_IVA2_MASK))
+ return;
+
+ /* Reset IVA2 */
+ omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
+ OMAP3430_RST2_IVA2_MASK |
+ OMAP3430_RST3_IVA2_MASK,
+ OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+
+ /* Enable IVA2 clock */
+ omap2_cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK,
+ OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+ /* Un-reset IVA2 */
+ omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+
+ /* Disable IVA2 clock */
+ omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+ /* Reset IVA2 */
+ omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
+ OMAP3430_RST2_IVA2_MASK |
+ OMAP3430_RST3_IVA2_MASK,
+ OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+}
+
+/**
+ * omap3xxx_prm_clear_global_cold_reset - checks the global cold reset status
+ * and clears it if asserted
+ *
+ * Checks if cold-reset has occurred and clears the status bit if yes. Returns
+ * 1 if cold-reset has occurred, 0 otherwise.
+ */
+int omap3xxx_prm_clear_global_cold_reset(void)
+{
+ if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
+ OMAP3430_GLOBAL_COLD_RST_MASK) {
+ omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_RSTST_OFFSET);
+ return 1;
+ }
+
+ return 0;
+}
+
+void omap3_prm_save_scratchpad_contents(u32 *ptr)
+{
+ *ptr++ = omap2_prm_read_mod_reg(OMAP3430_GR_MOD,
+ OMAP3_PRM_CLKSRC_CTRL_OFFSET);
+
+ *ptr++ = omap2_prm_read_mod_reg(OMAP3430_GR_MOD,
+ OMAP3_PRM_CLKSEL_OFFSET);
+}
+
/* Powerdomain low-level functions */
static int omap3_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index 1dacfc5b1959..bc37d42a8704 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -162,6 +162,12 @@ extern void omap3xxx_prm_dpll3_reset(void);
extern int __init omap3xxx_prm_init(void);
extern u32 omap3xxx_prm_get_reset_sources(void);
+int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits);
+void omap3xxx_prm_iva_idle(void);
+void omap3_prm_reset_modem(void);
+int omap3xxx_prm_clear_global_cold_reset(void);
+void omap3_prm_save_scratchpad_contents(u32 *ptr);
+void omap3_prm_init_pm(bool has_uart4, bool has_iva);
#endif /* __ASSEMBLER */
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index e832bc7b8e2d..8333400898fb 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -95,7 +95,6 @@ static int tusb_set_sync_mode(unsigned sysclk_ps)
dev_t.t_avdp_w = t_scsnh_advnh;
dev_t.cyc_aavdh_we = 3;
dev_t.cyc_wpl = 6;
- dev_t.t_ce_rdyz = 7000;
gpmc_calc_timings(&t, &tusb_sync, &dev_t);
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 91dd1c7cdbcd..06022b235730 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -514,7 +514,7 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
.gpio_pullup = CORGI_GPIO_USB_PULLUP,
};
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MASTER)
+#if IS_ENABLED(CONFIG_SPI_PXA2XX)
static struct pxa2xx_spi_master corgi_spi_info = {
.num_chipselect = 3,
};
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 6f38e1af45af..630fa916bbc6 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -90,19 +90,15 @@ EXPORT_SYMBOL(get_clk_frequency_khz);
*/
static struct map_desc common_io_desc[] __initdata = {
{ /* Devs */
- .virtual = 0xf2000000,
- .pfn = __phys_to_pfn(0x40000000),
- .length = 0x02000000,
- .type = MT_DEVICE
- }, { /* UNCACHED_PHYS_0 */
- .virtual = 0xff000000,
- .pfn = __phys_to_pfn(0x00000000),
- .length = 0x00100000,
+ .virtual = (unsigned long)PERIPH_VIRT,
+ .pfn = __phys_to_pfn(PERIPH_PHYS),
+ .length = PERIPH_SIZE,
.type = MT_DEVICE
}
};
void __init pxa_map_io(void)
{
+ debug_ll_io_init();
iotable_init(ARRAY_AND_SIZE(common_io_desc));
}
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index ccb06e485520..8d63c211b22f 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -19,8 +19,8 @@
* Workarounds for at least 2 errata so far require this.
* The mapping is set in mach-pxa/generic.c.
*/
-#define UNCACHED_PHYS_0 0xff000000
-#define UNCACHED_ADDR UNCACHED_PHYS_0
+#define UNCACHED_PHYS_0 0xfe000000
+#define UNCACHED_PHYS_0_SIZE 0x00100000
/*
* Intel PXA2xx internal register mapping:
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index f2c28972084d..66e4a2b6316e 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -331,7 +331,12 @@ static struct map_desc pxa25x_io_desc[] __initdata = {
{ /* Mem Ctl */
.virtual = (unsigned long)SMEMC_VIRT,
.pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE),
- .length = 0x00200000,
+ .length = SMEMC_SIZE,
+ .type = MT_DEVICE
+ }, { /* UNCACHED_PHYS_0 */
+ .virtual = UNCACHED_PHYS_0,
+ .pfn = __phys_to_pfn(0x00000000),
+ .length = UNCACHED_PHYS_0_SIZE,
.type = MT_DEVICE
},
};
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 301471a07a10..b040d7d14888 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -402,12 +402,12 @@ static struct map_desc pxa27x_io_desc[] __initdata = {
{ /* Mem Ctl */
.virtual = (unsigned long)SMEMC_VIRT,
.pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE),
- .length = 0x00200000,
+ .length = SMEMC_SIZE,
.type = MT_DEVICE
- }, { /* IMem ctl */
- .virtual = 0xfe000000,
- .pfn = __phys_to_pfn(0x58000000),
- .length = 0x00100000,
+ }, { /* UNCACHED_PHYS_0 */
+ .virtual = UNCACHED_PHYS_0,
+ .pfn = __phys_to_pfn(0x00000000),
+ .length = UNCACHED_PHYS_0_SIZE,
.type = MT_DEVICE
},
};
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 87011f3de69d..593ccd35ca97 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -416,7 +416,7 @@ static struct map_desc pxa3xx_io_desc[] __initdata = {
{ /* Mem Ctl */
.virtual = (unsigned long)SMEMC_VIRT,
.pfn = __phys_to_pfn(PXA3XX_SMEMC_BASE),
- .length = 0x00200000,
+ .length = SMEMC_SIZE,
.type = MT_DEVICE
}
};
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 1e544be9905d..6c5b3ffd2cd3 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -157,7 +157,7 @@ pxa_cpu_do_suspend:
@ Do not reorder...
@ Intel PXA270 Specification Update notes problems performing
@ external accesses after SDRAM is put in self-refresh mode
- @ (see Errata 39 ...hangs when entering self-refresh mode)
+ @ (see Errata 38 ...hangs when entering self-refresh mode)
@ force address lines low by reading at physical address 0
ldr r3, [r2]
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 8c1b39a0caa0..850e506926df 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -25,6 +25,7 @@
#include <linux/interrupt.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
+#include <linux/platform_data/video-clcd-versatile.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
#include <linux/ata_platform.h>
@@ -48,7 +49,6 @@
#include <mach/irqs.h>
#include <asm/hardware/timer-sp.h>
-#include <plat/clcd.h>
#include <plat/sched_clock.h>
#include "core.h"
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
deleted file mode 100644
index 26003e23796d..000000000000
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ /dev/null
@@ -1,102 +0,0 @@
-# arch/arm/mach-s5p64x0/Kconfig
-#
-# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
-# http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-if ARCH_S5P64X0
-
-config CPU_S5P6440
- bool
- select ARM_AMBA
- select PL330_DMA if DMADEVICES
- select S5P_SLEEP if PM
- select SAMSUNG_WAKEMASK if PM
- help
- Enable S5P6440 CPU support
-
-config CPU_S5P6450
- bool
- select ARM_AMBA
- select PL330_DMA if DMADEVICES
- select S5P_SLEEP if PM
- select SAMSUNG_WAKEMASK if PM
- help
- Enable S5P6450 CPU support
-
-config S5P64X0_SETUP_FB_24BPP
- bool
- help
- Common setup code for S5P64X0 based boards with a LCD display
- through RGB interface.
-
-config S5P64X0_SETUP_I2C1
- bool
- help
- Common setup code for i2c bus 1.
-
-config S5P64X0_SETUP_SPI
- bool
- help
- Common setup code for SPI GPIO configurations
-
-config S5P64X0_SETUP_SDHCI_GPIO
- bool
- help
- Common setup code for SDHCI gpio.
-
-# machine support
-
-config MACH_SMDK6440
- bool "SMDK6440"
- select CPU_S5P6440
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_I2C1
- select S3C_DEV_RTC
- select S3C_DEV_WDT
- select S5P64X0_SETUP_FB_24BPP
- select S5P64X0_SETUP_I2C1
- select S5P64X0_SETUP_SDHCI_GPIO
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_BACKLIGHT
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_TS
- help
- Machine support for the Samsung SMDK6440
-
-config MACH_SMDK6450
- bool "SMDK6450"
- select CPU_S5P6450
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_I2C1
- select S3C_DEV_RTC
- select S3C_DEV_WDT
- select S5P64X0_SETUP_FB_24BPP
- select S5P64X0_SETUP_I2C1
- select S5P64X0_SETUP_SDHCI_GPIO
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_BACKLIGHT
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_TS
- help
- Machine support for the Samsung SMDK6450
-
-menu "Use 8-bit SDHCI bus width"
-
-config S5P64X0_SD_CH1_8BIT
- bool "SDHCI Channel 1 (Slot 1)"
- depends on MACH_SMDK6450 || MACH_SMDK6440
- help
- Support SDHCI Channel 1 8-bit bus.
- If selected, Channel 2 is disabled.
-
-endmenu
-
-endif
diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile
deleted file mode 100644
index 12bb951187a4..000000000000
--- a/arch/arm/mach-s5p64x0/Makefile
+++ /dev/null
@@ -1,36 +0,0 @@
-# arch/arm/mach-s5p64x0/Makefile
-#
-# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
-# http://www.samsung.com
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-# Core
-
-obj-y += common.o clock.o
-obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o
-obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o
-
-obj-$(CONFIG_PM) += pm.o irq-pm.o
-
-obj-y += dma.o
-
-# machine support
-
-obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o
-obj-$(CONFIG_MACH_SMDK6450) += mach-smdk6450.o
-
-# device support
-
-obj-y += dev-audio.o
-
-obj-y += setup-i2c0.o
-obj-$(CONFIG_S5P64X0_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S5P64X0_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S5P64X0_SETUP_SPI) += setup-spi.o
-obj-$(CONFIG_S5P64X0_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
diff --git a/arch/arm/mach-s5p64x0/Makefile.boot b/arch/arm/mach-s5p64x0/Makefile.boot
deleted file mode 100644
index 79ece4055b02..000000000000
--- a/arch/arm/mach-s5p64x0/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
- zreladdr-y += 0x20008000
-params_phys-y := 0x20000100
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
deleted file mode 100644
index ae34a1d5e10a..000000000000
--- a/arch/arm/mach-s5p64x0/clock-s5p6440.c
+++ /dev/null
@@ -1,632 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/clock-s5p6440.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P6440 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-
-#include "clock.h"
-#include "common.h"
-
-static u32 epll_div[][5] = {
- { 36000000, 0, 48, 1, 4 },
- { 48000000, 0, 32, 1, 3 },
- { 60000000, 0, 40, 1, 3 },
- { 72000000, 0, 48, 1, 3 },
- { 84000000, 0, 28, 1, 2 },
- { 96000000, 0, 32, 1, 2 },
- { 32768000, 45264, 43, 1, 4 },
- { 45158000, 6903, 30, 1, 3 },
- { 49152000, 50332, 32, 1, 3 },
- { 67738000, 10398, 45, 1, 3 },
- { 73728000, 9961, 49, 1, 3 }
-};
-
-static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int epll_con, epll_con_k;
- unsigned int i;
-
- if (clk->rate == rate) /* Return if nothing changed */
- return 0;
-
- epll_con = __raw_readl(S5P64X0_EPLL_CON);
- epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K);
-
- epll_con_k &= ~(PLL90XX_KDIV_MASK);
- epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK);
-
- for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
- if (epll_div[i][0] == rate) {
- epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT);
- epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) |
- (epll_div[i][3] << PLL90XX_PDIV_SHIFT) |
- (epll_div[i][4] << PLL90XX_SDIV_SHIFT);
- break;
- }
- }
-
- if (i == ARRAY_SIZE(epll_div)) {
- printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
- return -EINVAL;
- }
-
- __raw_writel(epll_con, S5P64X0_EPLL_CON);
- __raw_writel(epll_con_k, S5P64X0_EPLL_CON_K);
-
- printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
- clk->rate, rate);
-
- clk->rate = rate;
-
- return 0;
-}
-
-static struct clk_ops s5p6440_epll_ops = {
- .get_rate = s5p_epll_get_rate,
- .set_rate = s5p6440_epll_set_rate,
-};
-
-static struct clksrc_clk clk_hclk = {
- .clk = {
- .name = "clk_hclk",
- .parent = &clk_armclk.clk,
- },
- .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_pclk = {
- .clk = {
- .name = "clk_pclk",
- .parent = &clk_hclk.clk,
- },
- .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 },
-};
-static struct clksrc_clk clk_hclk_low = {
- .clk = {
- .name = "clk_hclk_low",
- },
- .sources = &clkset_hclk_low,
- .reg_src = { .reg = S5P64X0_SYS_OTHERS, .shift = 6, .size = 1 },
- .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_pclk_low = {
- .clk = {
- .name = "clk_pclk_low",
- .parent = &clk_hclk_low.clk,
- },
- .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 },
-};
-
-/*
- * The following clocks will be disabled during clock initialization. It is
- * recommended to keep the following clocks disabled until the driver requests
- * for enabling the clock.
- */
-static struct clk init_clocks_off[] = {
- {
- .name = "nand",
- .parent = &clk_hclk.clk,
- .enable = s5p64x0_mem_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "post",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 5)
- }, {
- .name = "2d",
- .parent = &clk_hclk.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "dma",
- .devname = "dma-pl330",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 17),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 18),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.2",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 19),
- }, {
- .name = "otg",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 20)
- }, {
- .name = "irom",
- .parent = &clk_hclk.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 25),
- }, {
- .name = "lcd",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk1_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "hclk_fimgvg",
- .parent = &clk_hclk.clk,
- .enable = s5p64x0_hclk1_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "tsi",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk1_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "watchdog",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "rtc",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "timers",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "pcm",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "adc",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "i2c",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 17),
- }, {
- .name = "spi",
- .devname = "s5p64x0-spi.0",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 21),
- }, {
- .name = "spi",
- .devname = "s5p64x0-spi.1",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 22),
- }, {
- .name = "gps",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 25),
- }, {
- .name = "dsim",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 28),
- }, {
- .name = "etm",
- .parent = &clk_pclk.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 29),
- }, {
- .name = "dmc0",
- .parent = &clk_pclk.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 30),
- }, {
- .name = "pclk_fimgvg",
- .parent = &clk_pclk.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 31),
- }, {
- .name = "mmc_48m",
- .devname = "s3c-sdhci.0",
- .parent = &clk_48m,
- .enable = s5p64x0_sclk_ctrl,
- .ctrlbit = (1 << 27),
- }, {
- .name = "mmc_48m",
- .devname = "s3c-sdhci.1",
- .parent = &clk_48m,
- .enable = s5p64x0_sclk_ctrl,
- .ctrlbit = (1 << 28),
- }, {
- .name = "mmc_48m",
- .devname = "s3c-sdhci.2",
- .parent = &clk_48m,
- .enable = s5p64x0_sclk_ctrl,
- .ctrlbit = (1 << 29),
- },
-};
-
-/*
- * The following clocks will be enabled during clock initialization.
- */
-static struct clk init_clocks[] = {
- {
- .name = "intc",
- .parent = &clk_hclk.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "mem",
- .parent = &clk_hclk.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 21),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.0",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.1",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.2",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.3",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "gpio",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 18),
- },
-};
-
-static struct clk clk_iis_cd_v40 = {
- .name = "iis_cdclk_v40",
-};
-
-static struct clk clk_pcm_cd = {
- .name = "pcm_cdclk",
-};
-
-static struct clk *clkset_group1_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll.clk,
- &clk_fin_epll,
-};
-
-static struct clksrc_sources clkset_group1 = {
- .sources = clkset_group1_list,
- .nr_sources = ARRAY_SIZE(clkset_group1_list),
-};
-
-static struct clk *clkset_uart_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll.clk,
-};
-
-static struct clksrc_sources clkset_uart = {
- .sources = clkset_uart_list,
- .nr_sources = ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_audio_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll.clk,
- &clk_fin_epll,
- &clk_iis_cd_v40,
- &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio = {
- .sources = clkset_audio_list,
- .nr_sources = ARRAY_SIZE(clkset_audio_list),
-};
-
-static struct clksrc_clk clksrcs[] = {
- {
- .clk = {
- .name = "sclk_post",
- .ctrlbit = (1 << 10),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group1,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_dispcon",
- .ctrlbit = (1 << 1),
- .enable = s5p64x0_sclk1_ctrl,
- },
- .sources = &clkset_group1,
- .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimgvg",
- .ctrlbit = (1 << 2),
- .enable = s5p64x0_sclk1_ctrl,
- },
- .sources = &clkset_group1,
- .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 },
- },
-};
-
-static struct clksrc_clk clk_sclk_mmc0 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.0",
- .ctrlbit = (1 << 24),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group1,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc1 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.1",
- .ctrlbit = (1 << 25),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group1,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc2 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.2",
- .ctrlbit = (1 << 26),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group1,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_uclk = {
- .clk = {
- .name = "uclk1",
- .ctrlbit = (1 << 5),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_uart,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
-};
-
-static struct clk clk_i2s0 = {
- .name = "iis",
- .devname = "samsung-i2s.0",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 26),
-};
-
-static struct clksrc_clk clk_audio_bus2 = {
- .clk = {
- .name = "sclk_audio2",
- .devname = "samsung-i2s.0",
- .ctrlbit = (1 << 11),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_audio,
- .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 0, .size = 3 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 24, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi0 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "s5p64x0-spi.0",
- .ctrlbit = (1 << 20),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group1,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi1 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "s5p64x0-spi.1",
- .ctrlbit = (1 << 21),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group1,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 },
-};
-
-/* Clock initialization code */
-static struct clksrc_clk *sysclks[] = {
- &clk_mout_apll,
- &clk_mout_epll,
- &clk_mout_mpll,
- &clk_dout_mpll,
- &clk_armclk,
- &clk_hclk,
- &clk_pclk,
- &clk_hclk_low,
- &clk_pclk_low,
-};
-
-static struct clk dummy_apb_pclk = {
- .name = "apb_pclk",
- .id = -1,
-};
-
-static struct clk *clk_cdev[] = {
- &clk_i2s0,
-};
-
-static struct clksrc_clk *clksrc_cdev[] = {
- &clk_sclk_uclk,
- &clk_sclk_spi0,
- &clk_sclk_spi1,
- &clk_sclk_mmc0,
- &clk_sclk_mmc1,
- &clk_sclk_mmc2,
- &clk_audio_bus2,
-};
-
-static struct clk_lookup s5p6440_clk_lookup[] = {
- CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk),
- CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
- CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
- CLKDEV_INIT("s5p64x0-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
- CLKDEV_INIT("s5p64x0-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
- CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
- CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
- CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
- CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0),
- CLKDEV_INIT("samsung-i2s.0", "i2s_opclk1", &clk_audio_bus2.clk),
-};
-
-void __init_or_cpufreq s5p6440_setup_clocks(void)
-{
- struct clk *xtal_clk;
-
- unsigned long xtal;
- unsigned long fclk;
- unsigned long hclk;
- unsigned long hclk_low;
- unsigned long pclk;
- unsigned long pclk_low;
-
- unsigned long apll;
- unsigned long mpll;
- unsigned long epll;
- unsigned int ptr;
-
- /* Set S5P6440 functions for clk_fout_epll */
-
- clk_fout_epll.enable = s5p_epll_enable;
- clk_fout_epll.ops = &s5p6440_epll_ops;
-
- clk_48m.enable = s5p64x0_clk48m_ctrl;
-
- xtal_clk = clk_get(NULL, "ext_xtal");
- BUG_ON(IS_ERR(xtal_clk));
-
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502);
- mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502);
- epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON),
- __raw_readl(S5P64X0_EPLL_CON_K));
-
- clk_fout_apll.rate = apll;
- clk_fout_mpll.rate = mpll;
- clk_fout_epll.rate = epll;
-
- printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \
- " E=%ld.%ldMHz\n",
- print_mhz(apll), print_mhz(mpll), print_mhz(epll));
-
- fclk = clk_get_rate(&clk_armclk.clk);
- hclk = clk_get_rate(&clk_hclk.clk);
- pclk = clk_get_rate(&clk_pclk.clk);
- hclk_low = clk_get_rate(&clk_hclk_low.clk);
- pclk_low = clk_get_rate(&clk_pclk_low.clk);
-
- printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \
- " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n",
- print_mhz(hclk), print_mhz(hclk_low),
- print_mhz(pclk), print_mhz(pclk_low));
-
- clk_f.rate = fclk;
- clk_h.rate = hclk;
- clk_p.rate = pclk;
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
- s3c_set_clksrc(&clksrcs[ptr], true);
-}
-
-static struct clk *clks[] __initdata = {
- &clk_ext,
- &clk_iis_cd_v40,
- &clk_pcm_cd,
-};
-
-void __init s5p6440_register_clocks(void)
-{
- int ptr;
- unsigned int cnt;
-
- s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
- for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
- s3c_register_clksrc(sysclks[ptr], 1);
-
- s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
- for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++)
- s3c_disable_clocks(clk_cdev[cnt], 1);
-
- s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
- s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
- for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
- s3c_register_clksrc(clksrc_cdev[ptr], 1);
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- clkdev_add_table(s5p6440_clk_lookup, ARRAY_SIZE(s5p6440_clk_lookup));
-
- s3c24xx_register_clock(&dummy_apb_pclk);
-}
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
deleted file mode 100644
index 0b3ca2ed53e9..000000000000
--- a/arch/arm/mach-s5p64x0/clock-s5p6450.c
+++ /dev/null
@@ -1,701 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/clock-s5p6450.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P6450 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-
-#include "clock.h"
-#include "common.h"
-
-static struct clksrc_clk clk_mout_dpll = {
- .clk = {
- .name = "mout_dpll",
- },
- .sources = &clk_src_dpll,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 5, .size = 1 },
-};
-
-static u32 epll_div[][5] = {
- { 133000000, 27307, 55, 2, 2 },
- { 100000000, 43691, 41, 2, 2 },
- { 480000000, 0, 80, 2, 0 },
-};
-
-static int s5p6450_epll_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int epll_con, epll_con_k;
- unsigned int i;
-
- if (clk->rate == rate) /* Return if nothing changed */
- return 0;
-
- epll_con = __raw_readl(S5P64X0_EPLL_CON);
- epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K);
-
- epll_con_k &= ~(PLL90XX_KDIV_MASK);
- epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK);
-
- for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
- if (epll_div[i][0] == rate) {
- epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT);
- epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) |
- (epll_div[i][3] << PLL90XX_PDIV_SHIFT) |
- (epll_div[i][4] << PLL90XX_SDIV_SHIFT);
- break;
- }
- }
-
- if (i == ARRAY_SIZE(epll_div)) {
- printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
- return -EINVAL;
- }
-
- __raw_writel(epll_con, S5P64X0_EPLL_CON);
- __raw_writel(epll_con_k, S5P64X0_EPLL_CON_K);
-
- printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
- clk->rate, rate);
-
- clk->rate = rate;
-
- return 0;
-}
-
-static struct clk_ops s5p6450_epll_ops = {
- .get_rate = s5p_epll_get_rate,
- .set_rate = s5p6450_epll_set_rate,
-};
-
-static struct clksrc_clk clk_dout_epll = {
- .clk = {
- .name = "dout_epll",
- .parent = &clk_mout_epll.clk,
- },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 24, .size = 4 },
-};
-
-static struct clksrc_clk clk_mout_hclk_sel = {
- .clk = {
- .name = "mout_hclk_sel",
- },
- .sources = &clkset_hclk_low,
- .reg_src = { .reg = S5P64X0_OTHERS, .shift = 15, .size = 1 },
-};
-
-static struct clk *clkset_hclk_list[] = {
- &clk_mout_hclk_sel.clk,
- &clk_armclk.clk,
-};
-
-static struct clksrc_sources clkset_hclk = {
- .sources = clkset_hclk_list,
- .nr_sources = ARRAY_SIZE(clkset_hclk_list),
-};
-
-static struct clksrc_clk clk_hclk = {
- .clk = {
- .name = "clk_hclk",
- },
- .sources = &clkset_hclk,
- .reg_src = { .reg = S5P64X0_OTHERS, .shift = 14, .size = 1 },
- .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_pclk = {
- .clk = {
- .name = "clk_pclk",
- .parent = &clk_hclk.clk,
- },
- .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 },
-};
-static struct clksrc_clk clk_dout_pwm_ratio0 = {
- .clk = {
- .name = "clk_dout_pwm_ratio0",
- .parent = &clk_mout_hclk_sel.clk,
- },
- .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk clk_pclk_to_wdt_pwm = {
- .clk = {
- .name = "clk_pclk_to_wdt_pwm",
- .parent = &clk_dout_pwm_ratio0.clk,
- },
- .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 20, .size = 4 },
-};
-
-static struct clksrc_clk clk_hclk_low = {
- .clk = {
- .name = "clk_hclk_low",
- },
- .sources = &clkset_hclk_low,
- .reg_src = { .reg = S5P64X0_OTHERS, .shift = 6, .size = 1 },
- .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_pclk_low = {
- .clk = {
- .name = "clk_pclk_low",
- .parent = &clk_hclk_low.clk,
- },
- .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 },
-};
-
-/*
- * The following clocks will be disabled during clock initialization. It is
- * recommended to keep the following clocks disabled until the driver requests
- * for enabling the clock.
- */
-static struct clk init_clocks_off[] = {
- {
- .name = "usbhost",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "dma",
- .devname = "dma-pl330",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 17),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 18),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.2",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 19),
- }, {
- .name = "usbotg",
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 20),
- }, {
- .name = "lcd",
- .parent = &clk_h,
- .enable = s5p64x0_hclk1_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "watchdog",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "rtc",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "adc",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.0",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 17),
- }, {
- .name = "spi",
- .devname = "s5p64x0-spi.0",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 21),
- }, {
- .name = "spi",
- .devname = "s5p64x0-spi.1",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 22),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.1",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 27),
- }, {
- .name = "dmc0",
- .parent = &clk_pclk.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 30),
- }
-};
-
-/*
- * The following clocks will be enabled during clock initialization.
- */
-static struct clk init_clocks[] = {
- {
- .name = "intc",
- .parent = &clk_hclk.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "mem",
- .parent = &clk_hclk.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 21),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.0",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.1",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.2",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.3",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "timers",
- .parent = &clk_pclk_to_wdt_pwm.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "gpio",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 18),
- },
-};
-
-static struct clk *clkset_uart_list[] = {
- &clk_dout_epll.clk,
- &clk_dout_mpll.clk,
-};
-
-static struct clksrc_sources clkset_uart = {
- .sources = clkset_uart_list,
- .nr_sources = ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_mali_list[] = {
- &clk_mout_epll.clk,
- &clk_mout_apll.clk,
- &clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources clkset_mali = {
- .sources = clkset_mali_list,
- .nr_sources = ARRAY_SIZE(clkset_mali_list),
-};
-
-static struct clk *clkset_group2_list[] = {
- &clk_dout_epll.clk,
- &clk_dout_mpll.clk,
- &clk_ext_xtal_mux,
-};
-
-static struct clksrc_sources clkset_group2 = {
- .sources = clkset_group2_list,
- .nr_sources = ARRAY_SIZE(clkset_group2_list),
-};
-
-static struct clk *clkset_dispcon_list[] = {
- &clk_dout_epll.clk,
- &clk_dout_mpll.clk,
- &clk_ext_xtal_mux,
- &clk_mout_dpll.clk,
-};
-
-static struct clksrc_sources clkset_dispcon = {
- .sources = clkset_dispcon_list,
- .nr_sources = ARRAY_SIZE(clkset_dispcon_list),
-};
-
-static struct clk *clkset_hsmmc44_list[] = {
- &clk_dout_epll.clk,
- &clk_dout_mpll.clk,
- &clk_ext_xtal_mux,
- &s5p_clk_27m,
- &clk_48m,
-};
-
-static struct clksrc_sources clkset_hsmmc44 = {
- .sources = clkset_hsmmc44_list,
- .nr_sources = ARRAY_SIZE(clkset_hsmmc44_list),
-};
-
-static struct clk *clkset_sclk_audio0_list[] = {
- [0] = &clk_dout_epll.clk,
- [1] = &clk_dout_mpll.clk,
- [2] = &clk_ext_xtal_mux,
- [3] = NULL,
- [4] = NULL,
-};
-
-static struct clksrc_sources clkset_sclk_audio0 = {
- .sources = clkset_sclk_audio0_list,
- .nr_sources = ARRAY_SIZE(clkset_sclk_audio0_list),
-};
-
-static struct clksrc_clk clk_sclk_audio0 = {
- .clk = {
- .name = "audio-bus",
- .devname = "samsung-i2s.0",
- .enable = s5p64x0_sclk_ctrl,
- .ctrlbit = (1 << 8),
- .parent = &clk_dout_epll.clk,
- },
- .sources = &clkset_sclk_audio0,
- .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 10, .size = 3 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clksrcs[] = {
- {
- .clk = {
- .name = "sclk_fimc",
- .ctrlbit = (1 << 10),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 },
- }, {
- .clk = {
- .name = "aclk_mali",
- .ctrlbit = (1 << 2),
- .enable = s5p64x0_sclk1_ctrl,
- },
- .sources = &clkset_mali,
- .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_2d",
- .ctrlbit = (1 << 12),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_mali,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 30, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 20, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_usi",
- .ctrlbit = (1 << 7),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 10, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_camif",
- .ctrlbit = (1 << 6),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 28, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 20, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_dispcon",
- .ctrlbit = (1 << 1),
- .enable = s5p64x0_sclk1_ctrl,
- },
- .sources = &clkset_dispcon,
- .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_hsmmc44",
- .ctrlbit = (1 << 30),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_hsmmc44,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 6, .size = 3 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 28, .size = 4 },
- },
-};
-
-static struct clksrc_clk clk_sclk_mmc0 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.0",
- .ctrlbit = (1 << 24),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc1 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.1",
- .ctrlbit = (1 << 25),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc2 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.2",
- .ctrlbit = (1 << 26),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_uclk = {
- .clk = {
- .name = "uclk1",
- .ctrlbit = (1 << 5),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_uart,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi0 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "s5p64x0-spi.0",
- .ctrlbit = (1 << 20),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi1 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "s5p64x0-spi.1",
- .ctrlbit = (1 << 21),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 },
-};
-
-static struct clk clk_i2s0 = {
- .name = "iis",
- .devname = "samsung-i2s.0",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 26),
-};
-
-static struct clk clk_i2s1 = {
- .name = "iis",
- .devname = "samsung-i2s.1",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 15),
-};
-
-static struct clk clk_i2s2 = {
- .name = "iis",
- .devname = "samsung-i2s.2",
- .parent = &clk_pclk_low.clk,
- .enable = s5p64x0_pclk_ctrl,
- .ctrlbit = (1 << 16),
-};
-
-static struct clk *clk_cdev[] = {
- &clk_i2s0,
- &clk_i2s1,
- &clk_i2s2,
-};
-
-static struct clksrc_clk *clksrc_cdev[] = {
- &clk_sclk_uclk,
- &clk_sclk_spi0,
- &clk_sclk_spi1,
- &clk_sclk_mmc0,
- &clk_sclk_mmc1,
- &clk_sclk_mmc2,
- &clk_sclk_audio0,
-};
-
-static struct clk_lookup s5p6450_clk_lookup[] = {
- CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk),
- CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
- CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
- CLKDEV_INIT("s5p64x0-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
- CLKDEV_INIT("s5p64x0-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
- CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
- CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
- CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
- CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0),
- CLKDEV_INIT("samsung-i2s.0", "i2s_opclk1", &clk_sclk_audio0.clk),
- CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1),
- CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2),
-};
-
-/* Clock initialization code */
-static struct clksrc_clk *sysclks[] = {
- &clk_mout_apll,
- &clk_mout_epll,
- &clk_dout_epll,
- &clk_mout_mpll,
- &clk_dout_mpll,
- &clk_armclk,
- &clk_mout_hclk_sel,
- &clk_dout_pwm_ratio0,
- &clk_pclk_to_wdt_pwm,
- &clk_hclk,
- &clk_pclk,
- &clk_hclk_low,
- &clk_pclk_low,
-};
-
-static struct clk dummy_apb_pclk = {
- .name = "apb_pclk",
- .id = -1,
-};
-
-void __init_or_cpufreq s5p6450_setup_clocks(void)
-{
- struct clk *xtal_clk;
-
- unsigned long xtal;
- unsigned long fclk;
- unsigned long hclk;
- unsigned long hclk_low;
- unsigned long pclk;
- unsigned long pclk_low;
-
- unsigned long apll;
- unsigned long mpll;
- unsigned long epll;
- unsigned long dpll;
- unsigned int ptr;
-
- /* Set S5P6450 functions for clk_fout_epll */
-
- clk_fout_epll.enable = s5p_epll_enable;
- clk_fout_epll.ops = &s5p6450_epll_ops;
-
- clk_48m.enable = s5p64x0_clk48m_ctrl;
-
- xtal_clk = clk_get(NULL, "ext_xtal");
- BUG_ON(IS_ERR(xtal_clk));
-
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502);
- mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502);
- epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON),
- __raw_readl(S5P64X0_EPLL_CON_K));
- dpll = s5p_get_pll46xx(xtal, __raw_readl(S5P6450_DPLL_CON),
- __raw_readl(S5P6450_DPLL_CON_K), pll_4650c);
-
- clk_fout_apll.rate = apll;
- clk_fout_mpll.rate = mpll;
- clk_fout_epll.rate = epll;
- clk_fout_dpll.rate = dpll;
-
- printk(KERN_INFO "S5P6450: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \
- " E=%ld.%ldMHz, D=%ld.%ldMHz\n",
- print_mhz(apll), print_mhz(mpll), print_mhz(epll),
- print_mhz(dpll));
-
- fclk = clk_get_rate(&clk_armclk.clk);
- hclk = clk_get_rate(&clk_hclk.clk);
- pclk = clk_get_rate(&clk_pclk.clk);
- hclk_low = clk_get_rate(&clk_hclk_low.clk);
- pclk_low = clk_get_rate(&clk_pclk_low.clk);
-
- printk(KERN_INFO "S5P6450: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \
- " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n",
- print_mhz(hclk), print_mhz(hclk_low),
- print_mhz(pclk), print_mhz(pclk_low));
-
- clk_f.rate = fclk;
- clk_h.rate = hclk;
- clk_p.rate = pclk;
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
- s3c_set_clksrc(&clksrcs[ptr], true);
-}
-
-void __init s5p6450_register_clocks(void)
-{
- int ptr;
- unsigned int cnt;
-
- for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
- s3c_register_clksrc(sysclks[ptr], 1);
-
-
- s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
- for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++)
- s3c_disable_clocks(clk_cdev[cnt], 1);
-
- s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
- s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
- for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
- s3c_register_clksrc(clksrc_cdev[ptr], 1);
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- clkdev_add_table(s5p6450_clk_lookup, ARRAY_SIZE(s5p6450_clk_lookup));
-
- s3c24xx_register_clock(&dummy_apb_pclk);
-}
diff --git a/arch/arm/mach-s5p64x0/clock.c b/arch/arm/mach-s5p64x0/clock.c
deleted file mode 100644
index 57e718957ef3..000000000000
--- a/arch/arm/mach-s5p64x0/clock.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/clock.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-
-#include "common.h"
-
-struct clksrc_clk clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
- .id = -1,
- },
- .sources = &clk_src_apll,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 0, .size = 1 },
-};
-
-struct clksrc_clk clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
- .id = -1,
- },
- .sources = &clk_src_mpll,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 1, .size = 1 },
-};
-
-struct clksrc_clk clk_mout_epll = {
- .clk = {
- .name = "mout_epll",
- .id = -1,
- },
- .sources = &clk_src_epll,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 2, .size = 1 },
-};
-
-enum perf_level {
- L0 = 532*1000,
- L1 = 266*1000,
- L2 = 133*1000,
-};
-
-static const u32 clock_table[][3] = {
- /*{ARM_CLK, DIVarm, DIVhclk}*/
- {L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
- {L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
- {L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
-};
-
-static unsigned long s5p64x0_armclk_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- u32 clkdiv;
-
- /* divisor mask starts at bit0, so no need to shift */
- clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK;
-
- return rate / (clkdiv + 1);
-}
-
-static unsigned long s5p64x0_armclk_round_rate(struct clk *clk,
- unsigned long rate)
-{
- u32 iter;
-
- for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
- if (rate > clock_table[iter][0])
- return clock_table[iter-1][0];
- }
-
- return clock_table[ARRAY_SIZE(clock_table) - 1][0];
-}
-
-static int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 round_tmp;
- u32 iter;
- u32 clk_div0_tmp;
- u32 cur_rate = clk->ops->get_rate(clk);
- unsigned long flags;
-
- round_tmp = clk->ops->round_rate(clk, rate);
- if (round_tmp == cur_rate)
- return 0;
-
-
- for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
- if (round_tmp == clock_table[iter][0])
- break;
- }
-
- if (iter >= ARRAY_SIZE(clock_table))
- iter = ARRAY_SIZE(clock_table) - 1;
-
- local_irq_save(flags);
- if (cur_rate > round_tmp) {
- /* Frequency Down */
- clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
- clk_div0_tmp |= clock_table[iter][1];
- __raw_writel(clk_div0_tmp, ARM_CLK_DIV);
-
- clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
- ~(S5P64X0_CLKDIV0_HCLK_MASK);
- clk_div0_tmp |= clock_table[iter][2];
- __raw_writel(clk_div0_tmp, ARM_CLK_DIV);
-
-
- } else {
- /* Frequency Up */
- clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
- ~(S5P64X0_CLKDIV0_HCLK_MASK);
- clk_div0_tmp |= clock_table[iter][2];
- __raw_writel(clk_div0_tmp, ARM_CLK_DIV);
-
- clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
- clk_div0_tmp |= clock_table[iter][1];
- __raw_writel(clk_div0_tmp, ARM_CLK_DIV);
- }
- local_irq_restore(flags);
-
- clk->rate = clock_table[iter][0];
-
- return 0;
-}
-
-static struct clk_ops s5p64x0_clkarm_ops = {
- .get_rate = s5p64x0_armclk_get_rate,
- .set_rate = s5p64x0_armclk_set_rate,
- .round_rate = s5p64x0_armclk_round_rate,
-};
-
-struct clksrc_clk clk_armclk = {
- .clk = {
- .name = "armclk",
- .id = 1,
- .parent = &clk_mout_apll.clk,
- .ops = &s5p64x0_clkarm_ops,
- },
- .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 0, .size = 4 },
-};
-
-struct clksrc_clk clk_dout_mpll = {
- .clk = {
- .name = "dout_mpll",
- .id = -1,
- .parent = &clk_mout_mpll.clk,
- },
- .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 4, .size = 1 },
-};
-
-static struct clk *clkset_hclk_low_list[] = {
- &clk_mout_apll.clk,
- &clk_mout_mpll.clk,
-};
-
-struct clksrc_sources clkset_hclk_low = {
- .sources = clkset_hclk_low_list,
- .nr_sources = ARRAY_SIZE(clkset_hclk_low_list),
-};
-
-int s5p64x0_pclk_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P64X0_CLK_GATE_PCLK, clk, enable);
-}
-
-int s5p64x0_hclk0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK0, clk, enable);
-}
-
-int s5p64x0_hclk1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK1, clk, enable);
-}
-
-int s5p64x0_sclk_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK0, clk, enable);
-}
-
-int s5p64x0_sclk1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK1, clk, enable);
-}
-
-int s5p64x0_mem_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P64X0_CLK_GATE_MEM0, clk, enable);
-}
-
-int s5p64x0_clk48m_ctrl(struct clk *clk, int enable)
-{
- unsigned long flags;
- u32 val;
-
- /* can't rely on clock lock, this register has other usages */
- local_irq_save(flags);
-
- val = __raw_readl(S5P64X0_OTHERS);
- if (enable)
- val |= S5P64X0_OTHERS_USB_SIG_MASK;
- else
- val &= ~S5P64X0_OTHERS_USB_SIG_MASK;
-
- __raw_writel(val, S5P64X0_OTHERS);
-
- local_irq_restore(flags);
-
- return 0;
-}
diff --git a/arch/arm/mach-s5p64x0/clock.h b/arch/arm/mach-s5p64x0/clock.h
deleted file mode 100644
index 28b8e3c6bd24..000000000000
--- a/arch/arm/mach-s5p64x0/clock.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Header file for s5p64x0 clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __MACH_S5P64X0_CLOCK_H
-#define __MACH_S5P64X0_CLOCK_H __FILE__
-
-#include <linux/clk.h>
-
-extern struct clksrc_clk clk_mout_apll;
-extern struct clksrc_clk clk_mout_mpll;
-extern struct clksrc_clk clk_mout_epll;
-
-extern int s5p64x0_epll_enable(struct clk *clk, int enable);
-extern unsigned long s5p64x0_epll_get_rate(struct clk *clk);
-
-extern struct clksrc_clk clk_armclk;
-extern struct clksrc_clk clk_dout_mpll;
-
-extern struct clksrc_sources clkset_hclk_low;
-
-extern int s5p64x0_pclk_ctrl(struct clk *clk, int enable);
-extern int s5p64x0_hclk0_ctrl(struct clk *clk, int enable);
-extern int s5p64x0_hclk1_ctrl(struct clk *clk, int enable);
-extern int s5p64x0_sclk_ctrl(struct clk *clk, int enable);
-extern int s5p64x0_sclk1_ctrl(struct clk *clk, int enable);
-extern int s5p64x0_mem_ctrl(struct clk *clk, int enable);
-
-extern int s5p64x0_clk48m_ctrl(struct clk *clk, int enable);
-
-#endif /* __MACH_S5P64X0_CLOCK_H */
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
deleted file mode 100644
index 9a43be002d78..000000000000
--- a/arch/arm/mach-s5p64x0/common.c
+++ /dev/null
@@ -1,490 +0,0 @@
-/*
- * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Common Codes for S5P64X0 machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <clocksource/samsung_pwm.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/reboot.h>
-
-#include <asm/irq.h>
-#include <asm/proc-fns.h>
-#include <asm/system_misc.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/map.h>
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-#include <plat/sdhci.h>
-#include <plat/adc-core.h>
-#include <plat/fb-core.h>
-#include <plat/spi-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/pwm-core.h>
-#include <plat/regs-irqtype.h>
-#include <plat/watchdog-reset.h>
-
-#include "common.h"
-
-static const char name_s5p6440[] = "S5P6440";
-static const char name_s5p6450[] = "S5P6450";
-
-static struct cpu_table cpu_ids[] __initdata = {
- {
- .idcode = S5P6440_CPU_ID,
- .idmask = S5P64XX_CPU_MASK,
- .map_io = s5p6440_map_io,
- .init_clocks = s5p6440_init_clocks,
- .init_uarts = s5p6440_init_uarts,
- .init = s5p64x0_init,
- .name = name_s5p6440,
- }, {
- .idcode = S5P6450_CPU_ID,
- .idmask = S5P64XX_CPU_MASK,
- .map_io = s5p6450_map_io,
- .init_clocks = s5p6450_init_clocks,
- .init_uarts = s5p6450_init_uarts,
- .init = s5p64x0_init,
- .name = name_s5p6450,
- },
-};
-
-/* Initial IO mappings */
-
-static struct map_desc s5p64x0_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_CHIPID,
- .pfn = __phys_to_pfn(S5P64X0_PA_CHIPID),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_SYS,
- .pfn = __phys_to_pfn(S5P64X0_PA_SYSCON),
- .length = SZ_64K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_TIMER,
- .pfn = __phys_to_pfn(S5P64X0_PA_TIMER),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_WATCHDOG,
- .pfn = __phys_to_pfn(S5P64X0_PA_WDT),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_SROMC,
- .pfn = __phys_to_pfn(S5P64X0_PA_SROMC),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GPIO,
- .pfn = __phys_to_pfn(S5P64X0_PA_GPIO),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC0,
- .pfn = __phys_to_pfn(S5P64X0_PA_VIC0),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC1,
- .pfn = __phys_to_pfn(S5P64X0_PA_VIC1),
- .length = SZ_16K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc s5p6440_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(S5P6440_PA_UART(0)),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc s5p6450_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(S5P6450_PA_UART(0)),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_UART + SZ_512K,
- .pfn = __phys_to_pfn(S5P6450_PA_UART(5)),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static void s5p64x0_idle(void)
-{
- unsigned long val;
-
- val = __raw_readl(S5P64X0_PWR_CFG);
- val &= ~(0x3 << 5);
- val |= (0x1 << 5);
- __raw_writel(val, S5P64X0_PWR_CFG);
-
- cpu_do_idle();
-}
-
-static struct samsung_pwm_variant s5p64x0_pwm_variant = {
- .bits = 32,
- .div_base = 0,
- .has_tint_cstat = true,
- .tclk_mask = 0,
-};
-
-void __init samsung_set_timer_source(unsigned int event, unsigned int source)
-{
- s5p64x0_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
- s5p64x0_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
-}
-
-void __init samsung_timer_init(void)
-{
- unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
- IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
- IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
- };
-
- samsung_pwm_clocksource_init(S3C_VA_TIMER,
- timer_irqs, &s5p64x0_pwm_variant);
-}
-
-/*
- * s5p64x0_map_io
- *
- * register the standard CPU IO areas
- */
-
-void __init s5p64x0_init_io(struct map_desc *mach_desc, int size)
-{
- /* initialize the io descriptors we need for initialization */
- iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
- if (mach_desc)
- iotable_init(mach_desc, size);
-
- /* detect cpu id and rev. */
- s5p_init_cpu(S5P64X0_SYS_ID);
-
- s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
- samsung_wdt_reset_init(S3C_VA_WATCHDOG);
-
- samsung_pwm_set_platdata(&s5p64x0_pwm_variant);
-}
-
-#ifdef CONFIG_CPU_S5P6440
-void __init s5p6440_map_io(void)
-{
- /* initialize any device information early */
- s3c_adc_setname("s3c64xx-adc");
- s3c_fb_setname("s5p64x0-fb");
- s3c64xx_spi_setname("s5p64x0-spi");
-
- s5p64x0_default_sdhci0();
- s5p64x0_default_sdhci1();
- s5p6440_default_sdhci2();
-
- iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
-}
-#endif
-
-#ifdef CONFIG_CPU_S5P6450
-void __init s5p6450_map_io(void)
-{
- /* initialize any device information early */
- s3c_adc_setname("s3c64xx-adc");
- s3c_fb_setname("s5p64x0-fb");
- s3c64xx_spi_setname("s5p64x0-spi");
-
- s5p64x0_default_sdhci0();
- s5p64x0_default_sdhci1();
- s5p6450_default_sdhci2();
-
- iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
-}
-#endif
-
-/*
- * s5p64x0_init_clocks
- *
- * register and setup the CPU clocks
- */
-#ifdef CONFIG_CPU_S5P6440
-void __init s5p6440_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
- s3c24xx_register_baseclocks(xtal);
- s5p_register_clocks(xtal);
- s5p6440_register_clocks();
- s5p6440_setup_clocks();
-}
-#endif
-
-#ifdef CONFIG_CPU_S5P6450
-void __init s5p6450_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
- s3c24xx_register_baseclocks(xtal);
- s5p_register_clocks(xtal);
- s5p6450_register_clocks();
- s5p6450_setup_clocks();
-}
-#endif
-
-/*
- * s5p64x0_init_irq
- *
- * register the CPU interrupts
- */
-#ifdef CONFIG_CPU_S5P6440
-void __init s5p6440_init_irq(void)
-{
- /* S5P6440 supports 2 VIC */
- u32 vic[2];
-
- /*
- * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)]
- * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22]
- */
- vic[0] = 0xff800ae7;
- vic[1] = 0xffbf23e5;
-
- s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-#endif
-
-#ifdef CONFIG_CPU_S5P6450
-void __init s5p6450_init_irq(void)
-{
- /* S5P6450 supports only 2 VIC */
- u32 vic[2];
-
- /*
- * VIC0 is missing IRQ_VIC0[(13-15), (21-22)]
- * VIC1 is missing IRQ VIC1[12, 14, 23]
- */
- vic[0] = 0xff9f1fff;
- vic[1] = 0xff7fafff;
-
- s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-#endif
-
-struct bus_type s5p64x0_subsys = {
- .name = "s5p64x0-core",
- .dev_name = "s5p64x0-core",
-};
-
-static struct device s5p64x0_dev = {
- .bus = &s5p64x0_subsys,
-};
-
-static int __init s5p64x0_core_init(void)
-{
- return subsys_system_register(&s5p64x0_subsys, NULL);
-}
-core_initcall(s5p64x0_core_init);
-
-int __init s5p64x0_init(void)
-{
- printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n");
-
- /* set idle function */
- arm_pm_idle = s5p64x0_idle;
-
- return device_register(&s5p64x0_dev);
-}
-
-/* uart registration process */
-#ifdef CONFIG_CPU_S5P6440
-void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- int uart;
-
- for (uart = 0; uart < no; uart++) {
- s5p_uart_resources[uart].resources->start = S5P6440_PA_UART(uart);
- s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART;
- }
-
- s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
-}
-#endif
-
-#ifdef CONFIG_CPU_S5P6450
-void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
-}
-#endif
-
-#define eint_offset(irq) ((irq) - IRQ_EINT(0))
-
-static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
- int offs = eint_offset(data->irq);
- int shift;
- u32 ctrl, mask;
- u32 newvalue = 0;
-
- if (offs > 15)
- return -EINVAL;
-
- switch (type) {
- case IRQ_TYPE_NONE:
- printk(KERN_WARNING "No edge setting!\n");
- break;
- case IRQ_TYPE_EDGE_RISING:
- newvalue = S3C2410_EXTINT_RISEEDGE;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- newvalue = S3C2410_EXTINT_FALLEDGE;
- break;
- case IRQ_TYPE_EDGE_BOTH:
- newvalue = S3C2410_EXTINT_BOTHEDGE;
- break;
- case IRQ_TYPE_LEVEL_LOW:
- newvalue = S3C2410_EXTINT_LOWLEV;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- newvalue = S3C2410_EXTINT_HILEV;
- break;
- default:
- printk(KERN_ERR "No such irq type %d", type);
- return -EINVAL;
- }
-
- shift = (offs / 2) * 4;
- mask = 0x7 << shift;
-
- ctrl = __raw_readl(S5P64X0_EINT0CON0) & ~mask;
- ctrl |= newvalue << shift;
- __raw_writel(ctrl, S5P64X0_EINT0CON0);
-
- /* Configure the GPIO pin for 6450 or 6440 based on CPU ID */
- if (soc_is_s5p6450())
- s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2));
- else
- s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2));
-
- return 0;
-}
-
-/*
- * s5p64x0_irq_demux_eint
- *
- * This function demuxes the IRQ from the group0 external interrupts,
- * from IRQ_EINT(0) to IRQ_EINT(15). It is designed to be inlined into
- * the specific handlers s5p64x0_irq_demux_eintX_Y.
- */
-static inline void s5p64x0_irq_demux_eint(unsigned int start, unsigned int end)
-{
- u32 status = __raw_readl(S5P64X0_EINT0PEND);
- u32 mask = __raw_readl(S5P64X0_EINT0MASK);
- unsigned int irq;
-
- status &= ~mask;
- status >>= start;
- status &= (1 << (end - start + 1)) - 1;
-
- for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
- if (status & 1)
- generic_handle_irq(irq);
- status >>= 1;
- }
-}
-
-static void s5p64x0_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
-{
- s5p64x0_irq_demux_eint(0, 3);
-}
-
-static void s5p64x0_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
-{
- s5p64x0_irq_demux_eint(4, 11);
-}
-
-static void s5p64x0_irq_demux_eint12_15(unsigned int irq,
- struct irq_desc *desc)
-{
- s5p64x0_irq_demux_eint(12, 15);
-}
-
-static int s5p64x0_alloc_gc(void)
-{
- struct irq_chip_generic *gc;
- struct irq_chip_type *ct;
-
- gc = irq_alloc_generic_chip("s5p64x0-eint", 1, S5P_IRQ_EINT_BASE,
- S5P_VA_GPIO, handle_level_irq);
- if (!gc) {
- printk(KERN_ERR "%s: irq_alloc_generic_chip for group 0"
- "external interrupts failed\n", __func__);
- return -EINVAL;
- }
-
- ct = gc->chip_types;
- ct->chip.irq_ack = irq_gc_ack_set_bit;
- ct->chip.irq_mask = irq_gc_mask_set_bit;
- ct->chip.irq_unmask = irq_gc_mask_clr_bit;
- ct->chip.irq_set_type = s5p64x0_irq_eint_set_type;
- ct->chip.irq_set_wake = s3c_irqext_wake;
- ct->regs.ack = EINT0PEND_OFFSET;
- ct->regs.mask = EINT0MASK_OFFSET;
- irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE,
- IRQ_NOREQUEST | IRQ_NOPROBE, 0);
- return 0;
-}
-
-static int __init s5p64x0_init_irq_eint(void)
-{
- int ret = s5p64x0_alloc_gc();
- irq_set_chained_handler(IRQ_EINT0_3, s5p64x0_irq_demux_eint0_3);
- irq_set_chained_handler(IRQ_EINT4_11, s5p64x0_irq_demux_eint4_11);
- irq_set_chained_handler(IRQ_EINT12_15, s5p64x0_irq_demux_eint12_15);
-
- return ret;
-}
-arch_initcall(s5p64x0_init_irq_eint);
-
-void s5p64x0_restart(enum reboot_mode mode, const char *cmd)
-{
- if (mode != REBOOT_SOFT)
- samsung_wdt_reset();
-
- soft_restart(0);
-}
diff --git a/arch/arm/mach-s5p64x0/common.h b/arch/arm/mach-s5p64x0/common.h
deleted file mode 100644
index cbe7f3d731d0..000000000000
--- a/arch/arm/mach-s5p64x0/common.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Common Header for S5P64X0 machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_S5P64X0_COMMON_H
-#define __ARCH_ARM_MACH_S5P64X0_COMMON_H
-
-#include <linux/reboot.h>
-
-void s5p6440_init_irq(void);
-void s5p6450_init_irq(void);
-void s5p64x0_init_io(struct map_desc *mach_desc, int size);
-
-void s5p6440_register_clocks(void);
-void s5p6440_setup_clocks(void);
-
-void s5p6450_register_clocks(void);
-void s5p6450_setup_clocks(void);
-
-void s5p64x0_restart(enum reboot_mode mode, const char *cmd);
-extern int s5p64x0_init(void);
-
-#ifdef CONFIG_CPU_S5P6440
-
-extern void s5p6440_map_io(void);
-extern void s5p6440_init_clocks(int xtal);
-
-extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-#else
-#define s5p6440_init_clocks NULL
-#define s5p6440_init_uarts NULL
-#define s5p6440_map_io NULL
-#endif
-
-#ifdef CONFIG_CPU_S5P6450
-
-extern void s5p6450_map_io(void);
-extern void s5p6450_init_clocks(int xtal);
-
-extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-#else
-#define s5p6450_init_clocks NULL
-#define s5p6450_init_uarts NULL
-#define s5p6450_map_io NULL
-#endif
-
-#endif /* __ARCH_ARM_MACH_S5P64X0_COMMON_H */
diff --git a/arch/arm/mach-s5p64x0/dev-audio.c b/arch/arm/mach-s5p64x0/dev-audio.c
deleted file mode 100644
index 723d4773c323..000000000000
--- a/arch/arm/mach-s5p64x0/dev-audio.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/dev-audio.c
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <linux/platform_data/asoc-s3c.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-
-static int s5p6440_cfg_i2s(struct platform_device *pdev)
-{
- switch (pdev->id) {
- case 0:
- s3c_gpio_cfgpin_range(S5P6440_GPC(4), 2, S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6440_GPC(7), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin_range(S5P6440_GPH(6), 4, S3C_GPIO_SFN(5));
- break;
- default:
- printk(KERN_ERR "Invalid Device %d\n", pdev->id);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct s3c_audio_pdata s5p6440_i2s_pdata = {
- .cfg_gpio = s5p6440_cfg_i2s,
- .type = {
- .i2s = {
- .quirks = QUIRK_PRI_6CHAN,
- },
- },
-};
-
-static struct resource s5p64x0_i2s0_resource[] = {
- [0] = DEFINE_RES_MEM(S5P64X0_PA_I2S, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_I2S0_TX),
- [2] = DEFINE_RES_DMA(DMACH_I2S0_RX),
-};
-
-struct platform_device s5p6440_device_iis = {
- .name = "samsung-i2s",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5p64x0_i2s0_resource),
- .resource = s5p64x0_i2s0_resource,
- .dev = {
- .platform_data = &s5p6440_i2s_pdata,
- },
-};
-
-static int s5p6450_cfg_i2s(struct platform_device *pdev)
-{
- switch (pdev->id) {
- case 0:
- s3c_gpio_cfgpin_range(S5P6450_GPR(4), 5, S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin_range(S5P6450_GPR(13), 2, S3C_GPIO_SFN(5));
- break;
- case 1:
- s3c_gpio_cfgpin(S5P6440_GPB(4), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin_range(S5P6450_GPC(0), 4, S3C_GPIO_SFN(5));
- break;
- case 2:
- s3c_gpio_cfgpin_range(S5P6450_GPK(0), 5, S3C_GPIO_SFN(5));
- break;
- default:
- printk(KERN_ERR "Invalid Device %d\n", pdev->id);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct s3c_audio_pdata s5p6450_i2s0_pdata = {
- .cfg_gpio = s5p6450_cfg_i2s,
- .type = {
- .i2s = {
- .quirks = QUIRK_PRI_6CHAN,
- },
- },
-};
-
-struct platform_device s5p6450_device_iis0 = {
- .name = "samsung-i2s",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5p64x0_i2s0_resource),
- .resource = s5p64x0_i2s0_resource,
- .dev = {
- .platform_data = &s5p6450_i2s0_pdata,
- },
-};
-
-static struct s3c_audio_pdata s5p6450_i2s_pdata = {
- .cfg_gpio = s5p6450_cfg_i2s,
-};
-
-static struct resource s5p6450_i2s1_resource[] = {
- [0] = DEFINE_RES_MEM(S5P6450_PA_I2S1, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_I2S1_TX),
- [2] = DEFINE_RES_DMA(DMACH_I2S1_RX),
-};
-
-struct platform_device s5p6450_device_iis1 = {
- .name = "samsung-i2s",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5p6450_i2s1_resource),
- .resource = s5p6450_i2s1_resource,
- .dev = {
- .platform_data = &s5p6450_i2s_pdata,
- },
-};
-
-static struct resource s5p6450_i2s2_resource[] = {
- [0] = DEFINE_RES_MEM(S5P6450_PA_I2S2, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_I2S2_TX),
- [2] = DEFINE_RES_DMA(DMACH_I2S2_RX),
-};
-
-struct platform_device s5p6450_device_iis2 = {
- .name = "samsung-i2s",
- .id = 2,
- .num_resources = ARRAY_SIZE(s5p6450_i2s2_resource),
- .resource = s5p6450_i2s2_resource,
- .dev = {
- .platform_data = &s5p6450_i2s_pdata,
- },
-};
-
-/* PCM Controller platform_devices */
-
-static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev)
-{
- switch (pdev->id) {
- case 0:
- s3c_gpio_cfgpin_range(S5P6440_GPR(6), 3, S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin_range(S5P6440_GPR(13), 2, S3C_GPIO_SFN(2));
- break;
-
- default:
- printk(KERN_DEBUG "Invalid PCM Controller number!");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct s3c_audio_pdata s5p6440_pcm_pdata = {
- .cfg_gpio = s5p6440_pcm_cfg_gpio,
-};
-
-static struct resource s5p6440_pcm0_resource[] = {
- [0] = DEFINE_RES_MEM(S5P64X0_PA_PCM, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_PCM0_TX),
- [2] = DEFINE_RES_DMA(DMACH_PCM0_RX),
-};
-
-struct platform_device s5p6440_device_pcm = {
- .name = "samsung-pcm",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5p6440_pcm0_resource),
- .resource = s5p6440_pcm0_resource,
- .dev = {
- .platform_data = &s5p6440_pcm_pdata,
- },
-};
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
deleted file mode 100644
index 9c4ce085f585..000000000000
--- a/arch/arm/mach-s5p64x0/dma.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/dma.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/dma-mapping.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl330.h>
-
-#include <asm/irq.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/regs-clock.h>
-#include <mach/dma.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/irqs.h>
-
-static u8 s5p6440_pdma_peri[] = {
- DMACH_UART0_RX,
- DMACH_UART0_TX,
- DMACH_UART1_RX,
- DMACH_UART1_TX,
- DMACH_UART2_RX,
- DMACH_UART2_TX,
- DMACH_UART3_RX,
- DMACH_UART3_TX,
- DMACH_MAX,
- DMACH_MAX,
- DMACH_PCM0_TX,
- DMACH_PCM0_RX,
- DMACH_I2S0_TX,
- DMACH_I2S0_RX,
- DMACH_SPI0_TX,
- DMACH_SPI0_RX,
- DMACH_MAX,
- DMACH_MAX,
- DMACH_MAX,
- DMACH_MAX,
- DMACH_SPI1_TX,
- DMACH_SPI1_RX,
-};
-
-static struct dma_pl330_platdata s5p6440_pdma_pdata = {
- .nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri),
- .peri_id = s5p6440_pdma_peri,
-};
-
-static u8 s5p6450_pdma_peri[] = {
- DMACH_UART0_RX,
- DMACH_UART0_TX,
- DMACH_UART1_RX,
- DMACH_UART1_TX,
- DMACH_UART2_RX,
- DMACH_UART2_TX,
- DMACH_UART3_RX,
- DMACH_UART3_TX,
- DMACH_UART4_RX,
- DMACH_UART4_TX,
- DMACH_PCM0_TX,
- DMACH_PCM0_RX,
- DMACH_I2S0_TX,
- DMACH_I2S0_RX,
- DMACH_SPI0_TX,
- DMACH_SPI0_RX,
- DMACH_PCM1_TX,
- DMACH_PCM1_RX,
- DMACH_PCM2_TX,
- DMACH_PCM2_RX,
- DMACH_SPI1_TX,
- DMACH_SPI1_RX,
- DMACH_USI_TX,
- DMACH_USI_RX,
- DMACH_MAX,
- DMACH_I2S1_TX,
- DMACH_I2S1_RX,
- DMACH_I2S2_TX,
- DMACH_I2S2_RX,
- DMACH_PWM,
- DMACH_UART5_RX,
- DMACH_UART5_TX,
-};
-
-static struct dma_pl330_platdata s5p6450_pdma_pdata = {
- .nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri),
- .peri_id = s5p6450_pdma_peri,
-};
-
-static AMBA_AHB_DEVICE(s5p64x0_pdma, "dma-pl330", 0x00041330,
- S5P64X0_PA_PDMA, {IRQ_DMA0}, NULL);
-
-static int __init s5p64x0_dma_init(void)
-{
- if (soc_is_s5p6450()) {
- dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask);
- dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask);
- s5p64x0_pdma_device.dev.platform_data = &s5p6450_pdma_pdata;
- } else {
- dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask);
- dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask);
- s5p64x0_pdma_device.dev.platform_data = &s5p6440_pdma_pdata;
- }
-
- amba_device_register(&s5p64x0_pdma_device, &iomem_resource);
-
- return 0;
-}
-arch_initcall(s5p64x0_dma_init);
diff --git a/arch/arm/mach-s5p64x0/i2c.h b/arch/arm/mach-s5p64x0/i2c.h
deleted file mode 100644
index 1e5bb4ea200d..000000000000
--- a/arch/arm/mach-s5p64x0/i2c.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 I2C configuration
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern void s5p6440_i2c0_cfg_gpio(struct platform_device *dev);
-extern void s5p6440_i2c1_cfg_gpio(struct platform_device *dev);
-
-extern void s5p6450_i2c0_cfg_gpio(struct platform_device *dev);
-extern void s5p6450_i2c1_cfg_gpio(struct platform_device *dev);
diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
deleted file mode 100644
index 8759e7882bcb..000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <linux/serial_s3c.h>
-#include <plat/map-base.h>
-#include <plat/map-s5p.h>
-
- .macro addruart, rp, rv, tmp
- mov \rp, #0xE0000000
- orr \rp, \rp, #0x00100000
- ldr \rp, [\rp, #0x118 ]
- and \rp, \rp, #0xff000
- teq \rp, #0x50000 @@ S5P6450
- ldreq \rp, =0xEC800000
- movne \rp, #0xEC000000 @@ S5P6440
- ldrne \rv, = S3C_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
- add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
- add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
-#endif
- .endm
-
-#include <debug/samsung.S>
diff --git a/arch/arm/mach-s5p64x0/include/mach/dma.h b/arch/arm/mach-s5p64x0/include/mach/dma.h
deleted file mode 100644
index 5a622af461d7..000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/dma.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MACH_DMA_H
-#define __MACH_DMA_H
-
-/* This platform uses the common common DMA API driver for PL330 */
-#include <plat/dma-pl330.h>
-
-#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/gpio.h b/arch/arm/mach-s5p64x0/include/mach/gpio.h
deleted file mode 100644
index 06cd3c9b16ac..000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/gpio.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/gpio.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - GPIO lib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H __FILE__
-
-/* GPIO bank sizes */
-
-#define S5P6440_GPIO_A_NR (6)
-#define S5P6440_GPIO_B_NR (7)
-#define S5P6440_GPIO_C_NR (8)
-#define S5P6440_GPIO_F_NR (16)
-#define S5P6440_GPIO_G_NR (7)
-#define S5P6440_GPIO_H_NR (10)
-#define S5P6440_GPIO_I_NR (16)
-#define S5P6440_GPIO_J_NR (12)
-#define S5P6440_GPIO_N_NR (16)
-#define S5P6440_GPIO_P_NR (8)
-#define S5P6440_GPIO_R_NR (15)
-
-#define S5P6450_GPIO_A_NR (6)
-#define S5P6450_GPIO_B_NR (7)
-#define S5P6450_GPIO_C_NR (8)
-#define S5P6450_GPIO_D_NR (8)
-#define S5P6450_GPIO_F_NR (16)
-#define S5P6450_GPIO_G_NR (14)
-#define S5P6450_GPIO_H_NR (10)
-#define S5P6450_GPIO_I_NR (16)
-#define S5P6450_GPIO_J_NR (12)
-#define S5P6450_GPIO_K_NR (5)
-#define S5P6450_GPIO_N_NR (16)
-#define S5P6450_GPIO_P_NR (11)
-#define S5P6450_GPIO_Q_NR (14)
-#define S5P6450_GPIO_R_NR (15)
-#define S5P6450_GPIO_S_NR (8)
-
-/* GPIO bank numbers */
-
-/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
- * space for debugging purposes so that any accidental
- * change from one gpio bank to another can be caught.
-*/
-
-#define S5P64X0_GPIO_NEXT(__gpio) \
- ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-
-enum s5p6440_gpio_number {
- S5P6440_GPIO_A_START = 0,
- S5P6440_GPIO_B_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_A),
- S5P6440_GPIO_C_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_B),
- S5P6440_GPIO_F_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_C),
- S5P6440_GPIO_G_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_F),
- S5P6440_GPIO_H_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_G),
- S5P6440_GPIO_I_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_H),
- S5P6440_GPIO_J_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_I),
- S5P6440_GPIO_N_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_J),
- S5P6440_GPIO_P_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_N),
- S5P6440_GPIO_R_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_P),
-};
-
-enum s5p6450_gpio_number {
- S5P6450_GPIO_A_START = 0,
- S5P6450_GPIO_B_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_A),
- S5P6450_GPIO_C_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_B),
- S5P6450_GPIO_D_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_C),
- S5P6450_GPIO_F_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_D),
- S5P6450_GPIO_G_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_F),
- S5P6450_GPIO_H_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_G),
- S5P6450_GPIO_I_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_H),
- S5P6450_GPIO_J_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_I),
- S5P6450_GPIO_K_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_J),
- S5P6450_GPIO_N_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_K),
- S5P6450_GPIO_P_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_N),
- S5P6450_GPIO_Q_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_P),
- S5P6450_GPIO_R_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_Q),
- S5P6450_GPIO_S_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_R),
-};
-
-/* GPIO number definitions */
-
-#define S5P6440_GPA(_nr) (S5P6440_GPIO_A_START + (_nr))
-#define S5P6440_GPB(_nr) (S5P6440_GPIO_B_START + (_nr))
-#define S5P6440_GPC(_nr) (S5P6440_GPIO_C_START + (_nr))
-#define S5P6440_GPF(_nr) (S5P6440_GPIO_F_START + (_nr))
-#define S5P6440_GPG(_nr) (S5P6440_GPIO_G_START + (_nr))
-#define S5P6440_GPH(_nr) (S5P6440_GPIO_H_START + (_nr))
-#define S5P6440_GPI(_nr) (S5P6440_GPIO_I_START + (_nr))
-#define S5P6440_GPJ(_nr) (S5P6440_GPIO_J_START + (_nr))
-#define S5P6440_GPN(_nr) (S5P6440_GPIO_N_START + (_nr))
-#define S5P6440_GPP(_nr) (S5P6440_GPIO_P_START + (_nr))
-#define S5P6440_GPR(_nr) (S5P6440_GPIO_R_START + (_nr))
-
-#define S5P6450_GPA(_nr) (S5P6450_GPIO_A_START + (_nr))
-#define S5P6450_GPB(_nr) (S5P6450_GPIO_B_START + (_nr))
-#define S5P6450_GPC(_nr) (S5P6450_GPIO_C_START + (_nr))
-#define S5P6450_GPD(_nr) (S5P6450_GPIO_D_START + (_nr))
-#define S5P6450_GPF(_nr) (S5P6450_GPIO_F_START + (_nr))
-#define S5P6450_GPG(_nr) (S5P6450_GPIO_G_START + (_nr))
-#define S5P6450_GPH(_nr) (S5P6450_GPIO_H_START + (_nr))
-#define S5P6450_GPI(_nr) (S5P6450_GPIO_I_START + (_nr))
-#define S5P6450_GPJ(_nr) (S5P6450_GPIO_J_START + (_nr))
-#define S5P6450_GPK(_nr) (S5P6450_GPIO_K_START + (_nr))
-#define S5P6450_GPN(_nr) (S5P6450_GPIO_N_START + (_nr))
-#define S5P6450_GPP(_nr) (S5P6450_GPIO_P_START + (_nr))
-#define S5P6450_GPQ(_nr) (S5P6450_GPIO_Q_START + (_nr))
-#define S5P6450_GPR(_nr) (S5P6450_GPIO_R_START + (_nr))
-#define S5P6450_GPS(_nr) (S5P6450_GPIO_S_START + (_nr))
-
-/* the end of the S5P64X0 specific gpios */
-
-#define S5P6440_GPIO_END (S5P6440_GPR(S5P6440_GPIO_R_NR) + 1)
-#define S5P6450_GPIO_END (S5P6450_GPS(S5P6450_GPIO_S_NR) + 1)
-
-#define S5P64X0_GPIO_END (S5P6440_GPIO_END > S5P6450_GPIO_END ? \
- S5P6440_GPIO_END : S5P6450_GPIO_END)
-
-#define S3C_GPIO_END S5P64X0_GPIO_END
-
-/* define the number of gpios we need to the one after the last GPIO range */
-
-#define ARCH_NR_GPIOS (S5P64X0_GPIO_END + CONFIG_SAMSUNG_GPIO_EXTRA)
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/hardware.h b/arch/arm/mach-s5p64x0/include/mach/hardware.h
deleted file mode 100644
index d3e87996dd9a..000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/hardware.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/hardware.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - Hardware support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H __FILE__
-
-/* currently nothing here, placeholder */
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h
deleted file mode 100644
index 53982db9d259..000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/irqs.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/irqs.h
- *
- * Copyright 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - IRQ definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#include <plat/irqs.h>
-
-/* VIC0 */
-
-#define IRQ_EINT0_3 S5P_IRQ_VIC0(0)
-#define IRQ_EINT4_11 S5P_IRQ_VIC0(1)
-#define IRQ_RTC_TIC S5P_IRQ_VIC0(2)
-#define IRQ_IIS1 S5P_IRQ_VIC0(3) /* for only S5P6450 */
-#define IRQ_IIS2 S5P_IRQ_VIC0(4) /* for only S5P6450 */
-#define IRQ_IIC1 S5P_IRQ_VIC0(5)
-#define IRQ_I2SV40 S5P_IRQ_VIC0(6)
-#define IRQ_GPS S5P_IRQ_VIC0(7) /* for only S5P6450 */
-
-#define IRQ_2D S5P_IRQ_VIC0(11)
-#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(23)
-#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(24)
-#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(25)
-#define IRQ_WDT S5P_IRQ_VIC0(26)
-#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(27)
-#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(28)
-#define IRQ_DISPCON0 S5P_IRQ_VIC0(29)
-#define IRQ_DISPCON1 S5P_IRQ_VIC0(30)
-#define IRQ_DISPCON2 S5P_IRQ_VIC0(31)
-
-/* VIC1 */
-
-#define IRQ_EINT12_15 S5P_IRQ_VIC1(0)
-#define IRQ_PCM0 S5P_IRQ_VIC1(2)
-#define IRQ_PCM1 S5P_IRQ_VIC1(3) /* for only S5P6450 */
-#define IRQ_PCM2 S5P_IRQ_VIC1(4) /* for only S5P6450 */
-#define IRQ_UART0 S5P_IRQ_VIC1(5)
-#define IRQ_UART1 S5P_IRQ_VIC1(6)
-#define IRQ_UART2 S5P_IRQ_VIC1(7)
-#define IRQ_UART3 S5P_IRQ_VIC1(8)
-#define IRQ_DMA0 S5P_IRQ_VIC1(9)
-#define IRQ_UART4 S5P_IRQ_VIC1(10) /* S5P6450 */
-#define IRQ_UART5 S5P_IRQ_VIC1(11) /* S5P6450 */
-#define IRQ_NFC S5P_IRQ_VIC1(13)
-#define IRQ_USI S5P_IRQ_VIC1(15) /* S5P6450 */
-#define IRQ_SPI0 S5P_IRQ_VIC1(16)
-#define IRQ_SPI1 S5P_IRQ_VIC1(17)
-#define IRQ_HSMMC2 S5P_IRQ_VIC1(17) /* Shared */
-#define IRQ_IIC S5P_IRQ_VIC1(18)
-#define IRQ_DISPCON3 S5P_IRQ_VIC1(19)
-#define IRQ_EINT_GROUPS S5P_IRQ_VIC1(21)
-#define IRQ_PMU S5P_IRQ_VIC1(23) /* S5P6440 */
-#define IRQ_HSMMC0 S5P_IRQ_VIC1(24)
-#define IRQ_HSMMC1 S5P_IRQ_VIC1(25)
-#define IRQ_OTG S5P_IRQ_VIC1(26)
-#define IRQ_DSI S5P_IRQ_VIC1(27)
-#define IRQ_RTC_ALARM S5P_IRQ_VIC1(28)
-#define IRQ_TSI S5P_IRQ_VIC1(29)
-#define IRQ_PENDN S5P_IRQ_VIC1(30)
-#define IRQ_TC IRQ_PENDN
-#define IRQ_ADC S5P_IRQ_VIC1(31)
-
-/* UART interrupts, S5P6450 has 5 UARTs */
-#define IRQ_S5P_UART_BASE4 (96)
-#define IRQ_S5P_UART_BASE5 (100)
-
-#define IRQ_S5P_UART_RX4 (IRQ_S5P_UART_BASE4 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX4 (IRQ_S5P_UART_BASE4 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR4 (IRQ_S5P_UART_BASE4 + UART_IRQ_ERR)
-
-#define IRQ_S5P_UART_RX5 (IRQ_S5P_UART_BASE5 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX5 (IRQ_S5P_UART_BASE5 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR5 (IRQ_S5P_UART_BASE5 + UART_IRQ_ERR)
-
-/* S3C compatibilty defines */
-#define IRQ_S3CUART_RX4 IRQ_S5P_UART_RX4
-#define IRQ_S3CUART_RX5 IRQ_S5P_UART_RX5
-
-#define IRQ_I2S0 IRQ_I2SV40
-
-#define IRQ_LCD_FIFO IRQ_DISPCON0
-#define IRQ_LCD_VSYNC IRQ_DISPCON1
-#define IRQ_LCD_SYSTEM IRQ_DISPCON2
-
-/* S5P6450 EINT feature will be added */
-
-/*
- * Since the IRQ_EINT(x) are a linear mapping on s5p6440 we just defined
- * them as an IRQ_EINT(x) macro from S5P_IRQ_EINT_BASE which we place
- * after the pair of VICs.
- */
-
-#define S5P_IRQ_EINT_BASE (S5P_IRQ_VIC1(31) + 6)
-
-#define S5P_EINT(x) ((x) + S5P_IRQ_EINT_BASE)
-
-#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE)
-/*
- * S5P6440 has 0-15 external interrupts in group 0. Only these can be used
- * to wake up from sleep. If request is beyond this range, by mistake, a large
- * return value for an irq number should be indication of something amiss.
- */
-#define S5P_EINT_BASE2 (0xf0000000)
-
-/*
- * Next the external interrupt groups. These are similar to the IRQ_EINT(x)
- * that they are sourced from the GPIO pins but with a different scheme for
- * priority and source indication.
- *
- * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
- * interrupts, but for historical reasons they are kept apart from these
- * next interrupts.
- *
- * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
- * machine specific support files.
- */
-
-/* Actually, #6 and #7 are missing in the EINT_GROUP1 */
-#define IRQ_EINT_GROUP1_NR (15)
-#define IRQ_EINT_GROUP2_NR (8)
-#define IRQ_EINT_GROUP5_NR (7)
-#define IRQ_EINT_GROUP6_NR (10)
-/* Actually, #0, #1 and #2 are missing in the EINT_GROUP8 */
-#define IRQ_EINT_GROUP8_NR (11)
-
-#define IRQ_EINT_GROUP_BASE S5P_EINT(16)
-#define IRQ_EINT_GROUP1_BASE (IRQ_EINT_GROUP_BASE + 0)
-#define IRQ_EINT_GROUP2_BASE (IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
-#define IRQ_EINT_GROUP5_BASE (IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
-#define IRQ_EINT_GROUP6_BASE (IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
-#define IRQ_EINT_GROUP8_BASE (IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
-
-#define IRQ_EINT_GROUP(grp, x) (IRQ_EINT_GROUP##grp##_BASE + (x))
-
-/* Set the default NR_IRQS */
-
-#define NR_IRQS (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1)
-
-#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h
deleted file mode 100644
index 50a6e96d6389..000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/map.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/map.h
- *
- * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H __FILE__
-
-#include <plat/map-base.h>
-#include <plat/map-s5p.h>
-
-#define S5P64X0_PA_SDRAM 0x20000000
-
-#define S5P64X0_PA_CHIPID 0xE0000000
-
-#define S5P64X0_PA_SYSCON 0xE0100000
-
-#define S5P64X0_PA_GPIO 0xE0308000
-
-#define S5P64X0_PA_VIC0 0xE4000000
-#define S5P64X0_PA_VIC1 0xE4100000
-
-#define S5P64X0_PA_SROMC 0xE7000000
-
-#define S5P64X0_PA_PDMA 0xE9000000
-
-#define S5P64X0_PA_TIMER 0xEA000000
-#define S5P64X0_PA_RTC 0xEA100000
-#define S5P64X0_PA_WDT 0xEA200000
-
-#define S5P6440_PA_IIC0 0xEC104000
-#define S5P6440_PA_IIC1 0xEC20F000
-#define S5P6450_PA_IIC0 0xEC100000
-#define S5P6450_PA_IIC1 0xEC200000
-
-#define S5P64X0_PA_SPI0 0xEC400000
-#define S5P64X0_PA_SPI1 0xEC500000
-
-#define S5P64X0_PA_HSOTG 0xED100000
-
-#define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
-
-#define S5P64X0_PA_FB 0xEE000000
-
-#define S5P64X0_PA_I2S 0xF2000000
-#define S5P6450_PA_I2S1 0xF2800000
-#define S5P6450_PA_I2S2 0xF2900000
-
-#define S5P64X0_PA_PCM 0xF2100000
-
-#define S5P64X0_PA_ADC 0xF3000000
-
-/* Compatibiltiy Defines */
-
-#define S3C_PA_HSMMC0 S5P64X0_PA_HSMMC(0)
-#define S3C_PA_HSMMC1 S5P64X0_PA_HSMMC(1)
-#define S3C_PA_HSMMC2 S5P64X0_PA_HSMMC(2)
-#define S3C_PA_IIC S5P6440_PA_IIC0
-#define S3C_PA_IIC1 S5P6440_PA_IIC1
-#define S3C_PA_RTC S5P64X0_PA_RTC
-#define S3C_PA_WDT S5P64X0_PA_WDT
-#define S3C_PA_FB S5P64X0_PA_FB
-#define S3C_PA_SPI0 S5P64X0_PA_SPI0
-#define S3C_PA_SPI1 S5P64X0_PA_SPI1
-
-#define S5P_PA_CHIPID S5P64X0_PA_CHIPID
-#define S5P_PA_SROMC S5P64X0_PA_SROMC
-#define S5P_PA_SYSCON S5P64X0_PA_SYSCON
-#define S5P_PA_TIMER S5P64X0_PA_TIMER
-
-#define SAMSUNG_PA_ADC S5P64X0_PA_ADC
-#define SAMSUNG_PA_TIMER S5P64X0_PA_TIMER
-
-/* UART */
-
-#define S5P6440_PA_UART(x) (0xEC000000 + ((x) * S3C_UART_OFFSET))
-#define S5P6450_PA_UART(x) ((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000))
-
-#define S5P_PA_UART0 S5P6450_PA_UART(0)
-#define S5P_PA_UART1 S5P6450_PA_UART(1)
-#define S5P_PA_UART2 S5P6450_PA_UART(2)
-#define S5P_PA_UART3 S5P6450_PA_UART(3)
-#define S5P_PA_UART4 S5P6450_PA_UART(4)
-#define S5P_PA_UART5 S5P6450_PA_UART(5)
-
-#define S5P_SZ_UART SZ_256
-#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/pm-core.h b/arch/arm/mach-s5p64x0/include/mach/pm-core.h
deleted file mode 100644
index 1e0eb65b2b82..000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/pm-core.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/pm-core.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - PM core support for arch/arm/plat-samsung/pm.c
- *
- * Based on PM core support for S3C64XX by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/serial_s3c.h>
-
-#include <mach/regs-gpio.h>
-
-static inline void s3c_pm_debug_init_uart(void)
-{
- u32 tmp = __raw_readl(S5P64X0_CLK_GATE_PCLK);
-
- /*
- * As a note, since the S5P64X0 UARTs generally have multiple
- * clock sources, we simply enable PCLK at the moment and hope
- * that the resume settings for the UART are suitable for the
- * use with PCLK.
- */
- tmp |= S5P64X0_CLK_GATE_PCLK_UART0;
- tmp |= S5P64X0_CLK_GATE_PCLK_UART1;
- tmp |= S5P64X0_CLK_GATE_PCLK_UART2;
- tmp |= S5P64X0_CLK_GATE_PCLK_UART3;
-
- __raw_writel(tmp, S5P64X0_CLK_GATE_PCLK);
- udelay(10);
-}
-
-static inline void s3c_pm_arch_prepare_irqs(void)
-{
- /* VIC should have already been taken care of */
-
- /* clear any pending EINT0 interrupts */
- __raw_writel(__raw_readl(S5P64X0_EINT0PEND), S5P64X0_EINT0PEND);
-}
-
-static inline void s3c_pm_arch_stop_clocks(void) { }
-static inline void s3c_pm_arch_show_resume_irqs(void) { }
-
-/*
- * make these defines, we currently do not have any need to change
- * the IRQ wake controls depending on the CPU we are running on
- */
-#define s3c_irqwake_eintallow ((1 << 16) - 1)
-#define s3c_irqwake_intallow (~0)
-
-static inline void s3c_pm_arch_update_uart(void __iomem *regs,
- struct pm_uart_save *save)
-{
- u32 ucon = __raw_readl(regs + S3C2410_UCON);
- u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
- u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
- u32 new_ucon;
- u32 delta;
-
- /*
- * S5P64X0 UART blocks only support level interrupts, so ensure that
- * when we restore unused UART blocks we force the level interrupt
- * settings.
- */
- save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
-
- /*
- * We have a constraint on changing the clock type of the UART
- * between UCLKx and PCLK, so ensure that when we restore UCON
- * that the CLK field is correctly modified if the bootloader
- * has changed anything.
- */
- if (ucon_clk != save_clk) {
- new_ucon = save->ucon;
- delta = ucon_clk ^ save_clk;
-
- /*
- * change from UCLKx => wrong PCLK,
- * either UCLK can be tested for by a bit-test
- * with UCLK0
- */
- if (ucon_clk & S3C6400_UCON_UCLK0 &&
- !(save_clk & S3C6400_UCON_UCLK0) &&
- delta & S3C6400_UCON_PCLK2) {
- new_ucon &= ~S3C6400_UCON_UCLK0;
- } else if (delta == S3C6400_UCON_PCLK2) {
- /*
- * as a precaution, don't change from
- * PCLK2 => PCLK or vice-versa
- */
- new_ucon ^= S3C6400_UCON_PCLK2;
- }
-
- S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
- ucon, new_ucon, save->ucon);
- save->ucon = new_ucon;
- }
-}
-
-static inline void s3c_pm_restored_gpios(void)
-{
- /* ensure sleep mode has been cleared from the system */
- __raw_writel(0, S5P64X0_SLPEN);
-}
-
-static inline void samsung_pm_saved_gpios(void)
-{
- /*
- * turn on the sleep mode and keep it there, as it seems that during
- * suspend the xCON registers get re-set and thus you can end up with
- * problems between going to sleep and resuming.
- */
- __raw_writel(S5P64X0_SLPEN_USE_xSLP, S5P64X0_SLPEN);
-}
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
deleted file mode 100644
index bd91112c813c..000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - Clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_CLOCK_H
-#define __ASM_ARCH_REGS_CLOCK_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
-
-#define S5P64X0_APLL_CON S5P_CLKREG(0x0C)
-#define S5P64X0_MPLL_CON S5P_CLKREG(0x10)
-#define S5P64X0_EPLL_CON S5P_CLKREG(0x14)
-#define S5P64X0_EPLL_CON_K S5P_CLKREG(0x18)
-
-#define S5P64X0_CLK_SRC0 S5P_CLKREG(0x1C)
-
-#define S5P64X0_CLK_DIV0 S5P_CLKREG(0x20)
-#define S5P64X0_CLK_DIV1 S5P_CLKREG(0x24)
-#define S5P64X0_CLK_DIV2 S5P_CLKREG(0x28)
-
-#define S5P64X0_CLK_GATE_HCLK0 S5P_CLKREG(0x30)
-#define S5P64X0_CLK_GATE_PCLK S5P_CLKREG(0x34)
-#define S5P64X0_CLK_GATE_SCLK0 S5P_CLKREG(0x38)
-#define S5P64X0_CLK_GATE_MEM0 S5P_CLKREG(0x3C)
-
-#define S5P64X0_CLK_DIV3 S5P_CLKREG(0x40)
-
-#define S5P64X0_CLK_GATE_HCLK1 S5P_CLKREG(0x44)
-#define S5P64X0_CLK_GATE_SCLK1 S5P_CLKREG(0x48)
-
-#define S5P6450_DPLL_CON S5P_CLKREG(0x50)
-#define S5P6450_DPLL_CON_K S5P_CLKREG(0x54)
-
-#define S5P64X0_AHB_CON0 S5P_CLKREG(0x100)
-#define S5P64X0_CLK_SRC1 S5P_CLKREG(0x10C)
-
-#define S5P64X0_SYS_ID S5P_CLKREG(0x118)
-#define S5P64X0_SYS_OTHERS S5P_CLKREG(0x11C)
-
-#define S5P64X0_PWR_CFG S5P_CLKREG(0x804)
-#define S5P64X0_EINT_WAKEUP_MASK S5P_CLKREG(0x808)
-#define S5P64X0_SLEEP_CFG S5P_CLKREG(0x818)
-#define S5P64X0_PWR_STABLE S5P_CLKREG(0x828)
-
-#define S5P64X0_OTHERS S5P_CLKREG(0x900)
-#define S5P64X0_WAKEUP_STAT S5P_CLKREG(0x908)
-
-#define S5P64X0_INFORM0 S5P_CLKREG(0xA00)
-
-#define S5P64X0_CLKDIV0_HCLK_SHIFT (8)
-#define S5P64X0_CLKDIV0_HCLK_MASK (0xF << S5P64X0_CLKDIV0_HCLK_SHIFT)
-
-/* HCLK GATE Registers */
-#define S5P64X0_CLK_GATE_HCLK1_FIMGVG (1 << 2)
-#define S5P64X0_CLK_GATE_SCLK1_FIMGVG (1 << 2)
-
-/* PCLK GATE Registers */
-#define S5P64X0_CLK_GATE_PCLK_UART3 (1 << 4)
-#define S5P64X0_CLK_GATE_PCLK_UART2 (1 << 3)
-#define S5P64X0_CLK_GATE_PCLK_UART1 (1 << 2)
-#define S5P64X0_CLK_GATE_PCLK_UART0 (1 << 1)
-
-#define S5P64X0_PWR_CFG_MMC1_DISABLE (1 << 15)
-#define S5P64X0_PWR_CFG_MMC0_DISABLE (1 << 14)
-#define S5P64X0_PWR_CFG_RTC_TICK_DISABLE (1 << 11)
-#define S5P64X0_PWR_CFG_RTC_ALRM_DISABLE (1 << 10)
-#define S5P64X0_PWR_CFG_WFI_MASK (3 << 5)
-#define S5P64X0_PWR_CFG_WFI_SLEEP (3 << 5)
-
-#define S5P64X0_SLEEP_CFG_OSC_EN (1 << 0)
-
-#define S5P64X0_PWR_STABLE_PWR_CNT_VAL4 (4 << 0)
-
-#define S5P6450_OTHERS_DISABLE_INT (1 << 31)
-#define S5P64X0_OTHERS_RET_UART (1 << 26)
-#define S5P64X0_OTHERS_RET_MMC1 (1 << 25)
-#define S5P64X0_OTHERS_RET_MMC0 (1 << 24)
-#define S5P64X0_OTHERS_USB_SIG_MASK (1 << 16)
-
-/* Compatibility defines */
-
-#define ARM_CLK_DIV S5P64X0_CLK_DIV0
-#define ARM_DIV_RATIO_SHIFT 0
-#define ARM_DIV_MASK (0xF << ARM_DIV_RATIO_SHIFT)
-
-#define S5P_EPLL_CON S5P64X0_EPLL_CON
-
-#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
deleted file mode 100644
index cfdfa4fdadf2..000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - GPIO register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_GPIO_H
-#define __ASM_ARCH_REGS_GPIO_H __FILE__
-
-#include <mach/map.h>
-
-/* Base addresses for each of the banks */
-
-#define S5P64X0_GPA_BASE (S5P_VA_GPIO + 0x0000)
-#define S5P64X0_GPB_BASE (S5P_VA_GPIO + 0x0020)
-#define S5P64X0_GPC_BASE (S5P_VA_GPIO + 0x0040)
-#define S5P64X0_GPF_BASE (S5P_VA_GPIO + 0x00A0)
-#define S5P64X0_GPG_BASE (S5P_VA_GPIO + 0x00C0)
-#define S5P64X0_GPH_BASE (S5P_VA_GPIO + 0x00E0)
-#define S5P64X0_GPI_BASE (S5P_VA_GPIO + 0x0100)
-#define S5P64X0_GPJ_BASE (S5P_VA_GPIO + 0x0120)
-#define S5P64X0_GPN_BASE (S5P_VA_GPIO + 0x0830)
-#define S5P64X0_GPP_BASE (S5P_VA_GPIO + 0x0160)
-#define S5P64X0_GPR_BASE (S5P_VA_GPIO + 0x0290)
-
-#define S5P6450_GPD_BASE (S5P_VA_GPIO + 0x0060)
-#define S5P6450_GPK_BASE (S5P_VA_GPIO + 0x0140)
-#define S5P6450_GPQ_BASE (S5P_VA_GPIO + 0x0180)
-#define S5P6450_GPS_BASE (S5P_VA_GPIO + 0x0300)
-
-#define S5P64X0_SPCON0 (S5P_VA_GPIO + 0x1A0)
-#define S5P64X0_SPCON0_LCD_SEL_MASK (0x3 << 0)
-#define S5P64X0_SPCON0_LCD_SEL_RGB (0x1 << 0)
-#define S5P64X0_SPCON1 (S5P_VA_GPIO + 0x2B0)
-
-#define S5P64X0_MEM0CONSLP0 (S5P_VA_GPIO + 0x1C0)
-#define S5P64X0_MEM0CONSLP1 (S5P_VA_GPIO + 0x1C4)
-#define S5P64X0_MEM0DRVCON (S5P_VA_GPIO + 0x1D0)
-#define S5P64X0_MEM1DRVCON (S5P_VA_GPIO + 0x1D4)
-
-#define S5P64X0_EINT12CON (S5P_VA_GPIO + 0x200)
-#define S5P64X0_EINT12FLTCON (S5P_VA_GPIO + 0x220)
-#define S5P64X0_EINT12MASK (S5P_VA_GPIO + 0x240)
-
-/* External interrupt control registers for group0 */
-
-#define EINT0CON0_OFFSET (0x900)
-#define EINT0FLTCON0_OFFSET (0x910)
-#define EINT0FLTCON1_OFFSET (0x914)
-#define EINT0MASK_OFFSET (0x920)
-#define EINT0PEND_OFFSET (0x924)
-
-#define S5P64X0_EINT0CON0 (S5P_VA_GPIO + EINT0CON0_OFFSET)
-#define S5P64X0_EINT0FLTCON0 (S5P_VA_GPIO + EINT0FLTCON0_OFFSET)
-#define S5P64X0_EINT0FLTCON1 (S5P_VA_GPIO + EINT0FLTCON1_OFFSET)
-#define S5P64X0_EINT0MASK (S5P_VA_GPIO + EINT0MASK_OFFSET)
-#define S5P64X0_EINT0PEND (S5P_VA_GPIO + EINT0PEND_OFFSET)
-
-#define S5P64X0_SLPEN (S5P_VA_GPIO + 0x930)
-#define S5P64X0_SLPEN_USE_xSLP (1 << 0)
-
-#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-irq.h b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
deleted file mode 100644
index d60397d1ff40..000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - IRQ register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_IRQ_H
-#define __ASM_ARCH_REGS_IRQ_H __FILE__
-
-#include <mach/map.h>
-
-#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5p64x0/irq-pm.c b/arch/arm/mach-s5p64x0/irq-pm.c
deleted file mode 100644
index 2ed921e095dc..000000000000
--- a/arch/arm/mach-s5p64x0/irq-pm.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/irq-pm.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - Interrupt handling Power Management
- *
- * Based on arch/arm/mach-s3c64xx/irq-pm.c by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <plat/pm.h>
-
-#include <mach/regs-gpio.h>
-
-static struct sleep_save irq_save[] = {
- SAVE_ITEM(S5P64X0_EINT0CON0),
- SAVE_ITEM(S5P64X0_EINT0FLTCON0),
- SAVE_ITEM(S5P64X0_EINT0FLTCON1),
- SAVE_ITEM(S5P64X0_EINT0MASK),
-};
-
-static struct irq_grp_save {
- u32 con;
- u32 fltcon;
- u32 mask;
-} eint_grp_save[4];
-
-#ifdef CONFIG_SERIAL_SAMSUNG
-static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
-#endif
-
-static int s5p64x0_irq_pm_suspend(void)
-{
- struct irq_grp_save *grp = eint_grp_save;
- int i;
-
- S3C_PMDBG("%s: suspending IRQs\n", __func__);
-
- s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
-
-#ifdef CONFIG_SERIAL_SAMSUNG
- for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
- irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
-#endif
-
- for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
- grp->con = __raw_readl(S5P64X0_EINT12CON + (i * 4));
- grp->mask = __raw_readl(S5P64X0_EINT12MASK + (i * 4));
- grp->fltcon = __raw_readl(S5P64X0_EINT12FLTCON + (i * 4));
- }
-
- return 0;
-}
-
-static void s5p64x0_irq_pm_resume(void)
-{
- struct irq_grp_save *grp = eint_grp_save;
- int i;
-
- S3C_PMDBG("%s: resuming IRQs\n", __func__);
-
- s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
-
-#ifdef CONFIG_SERIAL_SAMSUNG
- for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
- __raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
-#endif
-
- for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
- __raw_writel(grp->con, S5P64X0_EINT12CON + (i * 4));
- __raw_writel(grp->mask, S5P64X0_EINT12MASK + (i * 4));
- __raw_writel(grp->fltcon, S5P64X0_EINT12FLTCON + (i * 4));
- }
-
- S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
-}
-
-static struct syscore_ops s5p64x0_irq_syscore_ops = {
- .suspend = s5p64x0_irq_pm_suspend,
- .resume = s5p64x0_irq_pm_resume,
-};
-
-static int __init s5p64x0_syscore_init(void)
-{
- register_syscore_ops(&s5p64x0_irq_syscore_ops);
-
- return 0;
-}
-core_initcall(s5p64x0_syscore_init);
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
deleted file mode 100644
index 6840e197cb2d..000000000000
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ /dev/null
@@ -1,280 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/mach-smdk6440.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/pwm_backlight.h>
-#include <linux/fb.h>
-#include <linux/mmc/host.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/pll.h>
-#include <plat/adc.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <plat/samsung-time.h>
-#include <plat/backlight.h>
-#include <plat/fb.h>
-#include <plat/sdhci.h>
-
-#include "common.h"
-#include "i2c.h"
-
-#define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDK6440_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define SMDK6440_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S3C2440_UFCON_TXTRIG16 | \
- S3C2410_UFCON_RXTRIG8)
-
-static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = SMDK6440_UCON_DEFAULT,
- .ulcon = SMDK6440_ULCON_DEFAULT,
- .ufcon = SMDK6440_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = SMDK6440_UCON_DEFAULT,
- .ulcon = SMDK6440_ULCON_DEFAULT,
- .ufcon = SMDK6440_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = SMDK6440_UCON_DEFAULT,
- .ulcon = SMDK6440_ULCON_DEFAULT,
- .ufcon = SMDK6440_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = SMDK6440_UCON_DEFAULT,
- .ulcon = SMDK6440_ULCON_DEFAULT,
- .ufcon = SMDK6440_UFCON_DEFAULT,
- },
-};
-
-/* Frame Buffer */
-static struct s3c_fb_pd_win smdk6440_fb_win0 = {
- .max_bpp = 32,
- .default_bpp = 24,
- .xres = 800,
- .yres = 480,
-};
-
-static struct fb_videomode smdk6440_lcd_timing = {
- .left_margin = 8,
- .right_margin = 13,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
-};
-
-static struct s3c_fb_platdata smdk6440_lcd_pdata __initdata = {
- .win[0] = &smdk6440_fb_win0,
- .vtiming = &smdk6440_lcd_timing,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .setup_gpio = s5p64x0_fb_gpio_setup_24bpp,
-};
-
-/* LCD power controller */
-static void smdk6440_lte480_reset_power(struct plat_lcd_data *pd,
- unsigned int power)
-{
- int err;
-
- if (power) {
- err = gpio_request(S5P6440_GPN(5), "GPN");
- if (err) {
- printk(KERN_ERR "failed to request GPN for lcd reset\n");
- return;
- }
-
- gpio_direction_output(S5P6440_GPN(5), 1);
- gpio_set_value(S5P6440_GPN(5), 0);
- gpio_set_value(S5P6440_GPN(5), 1);
- gpio_free(S5P6440_GPN(5));
- }
-}
-
-static struct plat_lcd_data smdk6440_lcd_power_data = {
- .set_power = smdk6440_lte480_reset_power,
-};
-
-static struct platform_device smdk6440_lcd_lte480wv = {
- .name = "platform-lcd",
- .dev.parent = &s3c_device_fb.dev,
- .dev.platform_data = &smdk6440_lcd_power_data,
-};
-
-static struct platform_device *smdk6440_devices[] __initdata = {
- &s3c_device_adc,
- &s3c_device_rtc,
- &s3c_device_i2c0,
- &s3c_device_i2c1,
- &samsung_device_pwm,
- &s3c_device_ts,
- &s3c_device_wdt,
- &s5p6440_device_iis,
- &s3c_device_fb,
- &smdk6440_lcd_lte480wv,
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc1,
- &s3c_device_hsmmc2,
-};
-
-static struct s3c_sdhci_platdata smdk6440_hsmmc0_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_NONE,
-};
-
-static struct s3c_sdhci_platdata smdk6440_hsmmc1_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_INTERNAL,
-#if defined(CONFIG_S5P64X0_SD_CH1_8BIT)
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdk6440_hsmmc2_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_NONE,
-};
-
-static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = {
- .flags = 0,
- .slave_addr = 0x10,
- .frequency = 100*1000,
- .sda_delay = 100,
- .cfg_gpio = s5p6440_i2c0_cfg_gpio,
-};
-
-static struct s3c2410_platform_i2c s5p6440_i2c1_data __initdata = {
- .flags = 0,
- .bus_num = 1,
- .slave_addr = 0x10,
- .frequency = 100*1000,
- .sda_delay = 100,
- .cfg_gpio = s5p6440_i2c1_cfg_gpio,
-};
-
-static struct i2c_board_info smdk6440_i2c_devs0[] __initdata = {
- { I2C_BOARD_INFO("24c08", 0x50), },
- { I2C_BOARD_INFO("wm8580", 0x1b), },
-};
-
-static struct i2c_board_info smdk6440_i2c_devs1[] __initdata = {
- /* To be populated */
-};
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdk6440_bl_gpio_info = {
- .no = S5P6440_GPF(15),
- .func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdk6440_bl_data = {
- .pwm_id = 1,
- .enable_gpio = -1,
-};
-
-static void __init smdk6440_map_io(void)
-{
- s5p64x0_init_io(NULL, 0);
- s3c24xx_init_clocks(12000000);
- s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void s5p6440_set_lcd_interface(void)
-{
- unsigned int cfg;
-
- /* select TFT LCD type (RGB I/F) */
- cfg = __raw_readl(S5P64X0_SPCON0);
- cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
- cfg |= S5P64X0_SPCON0_LCD_SEL_RGB;
- __raw_writel(cfg, S5P64X0_SPCON0);
-}
-
-static void __init smdk6440_machine_init(void)
-{
- s3c24xx_ts_set_platdata(NULL);
-
- s3c_i2c0_set_platdata(&s5p6440_i2c0_data);
- s3c_i2c1_set_platdata(&s5p6440_i2c1_data);
- i2c_register_board_info(0, smdk6440_i2c_devs0,
- ARRAY_SIZE(smdk6440_i2c_devs0));
- i2c_register_board_info(1, smdk6440_i2c_devs1,
- ARRAY_SIZE(smdk6440_i2c_devs1));
-
- s5p6440_set_lcd_interface();
- s3c_fb_set_platdata(&smdk6440_lcd_pdata);
-
- s3c_sdhci0_set_platdata(&smdk6440_hsmmc0_pdata);
- s3c_sdhci1_set_platdata(&smdk6440_hsmmc1_pdata);
- s3c_sdhci2_set_platdata(&smdk6440_hsmmc2_pdata);
-
- platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
-
- samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data);
-}
-
-MACHINE_START(SMDK6440, "SMDK6440")
- /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .atag_offset = 0x100,
-
- .init_irq = s5p6440_init_irq,
- .map_io = smdk6440_map_io,
- .init_machine = smdk6440_machine_init,
- .init_time = samsung_timer_init,
- .restart = s5p64x0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
deleted file mode 100644
index fa1341c074ca..000000000000
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/mach-smdk6450.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/pwm_backlight.h>
-#include <linux/fb.h>
-#include <linux/mmc/host.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/pll.h>
-#include <plat/adc.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <plat/samsung-time.h>
-#include <plat/backlight.h>
-#include <plat/fb.h>
-#include <plat/sdhci.h>
-
-#include "common.h"
-#include "i2c.h"
-
-#define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDK6450_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define SMDK6450_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S3C2440_UFCON_TXTRIG16 | \
- S3C2410_UFCON_RXTRIG8)
-
-static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = SMDK6450_UCON_DEFAULT,
- .ulcon = SMDK6450_ULCON_DEFAULT,
- .ufcon = SMDK6450_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = SMDK6450_UCON_DEFAULT,
- .ulcon = SMDK6450_ULCON_DEFAULT,
- .ufcon = SMDK6450_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = SMDK6450_UCON_DEFAULT,
- .ulcon = SMDK6450_ULCON_DEFAULT,
- .ufcon = SMDK6450_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = SMDK6450_UCON_DEFAULT,
- .ulcon = SMDK6450_ULCON_DEFAULT,
- .ufcon = SMDK6450_UFCON_DEFAULT,
- },
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
- [4] = {
- .hwport = 4,
- .flags = 0,
- .ucon = SMDK6450_UCON_DEFAULT,
- .ulcon = SMDK6450_ULCON_DEFAULT,
- .ufcon = SMDK6450_UFCON_DEFAULT,
- },
-#endif
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
- [5] = {
- .hwport = 5,
- .flags = 0,
- .ucon = SMDK6450_UCON_DEFAULT,
- .ulcon = SMDK6450_ULCON_DEFAULT,
- .ufcon = SMDK6450_UFCON_DEFAULT,
- },
-#endif
-};
-
-/* Frame Buffer */
-static struct s3c_fb_pd_win smdk6450_fb_win0 = {
- .max_bpp = 32,
- .default_bpp = 24,
- .xres = 800,
- .yres = 480,
-};
-
-static struct fb_videomode smdk6450_lcd_timing = {
- .left_margin = 8,
- .right_margin = 13,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
-};
-
-static struct s3c_fb_platdata smdk6450_lcd_pdata __initdata = {
- .win[0] = &smdk6450_fb_win0,
- .vtiming = &smdk6450_lcd_timing,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .setup_gpio = s5p64x0_fb_gpio_setup_24bpp,
-};
-
-/* LCD power controller */
-static void smdk6450_lte480_reset_power(struct plat_lcd_data *pd,
- unsigned int power)
-{
- int err;
-
- if (power) {
- err = gpio_request(S5P6450_GPN(5), "GPN");
- if (err) {
- printk(KERN_ERR "failed to request GPN for lcd reset\n");
- return;
- }
-
- gpio_direction_output(S5P6450_GPN(5), 1);
- gpio_set_value(S5P6450_GPN(5), 0);
- gpio_set_value(S5P6450_GPN(5), 1);
- gpio_free(S5P6450_GPN(5));
- }
-}
-
-static struct plat_lcd_data smdk6450_lcd_power_data = {
- .set_power = smdk6450_lte480_reset_power,
-};
-
-static struct platform_device smdk6450_lcd_lte480wv = {
- .name = "platform-lcd",
- .dev.parent = &s3c_device_fb.dev,
- .dev.platform_data = &smdk6450_lcd_power_data,
-};
-
-static struct platform_device *smdk6450_devices[] __initdata = {
- &s3c_device_adc,
- &s3c_device_rtc,
- &s3c_device_i2c0,
- &s3c_device_i2c1,
- &samsung_device_pwm,
- &s3c_device_ts,
- &s3c_device_wdt,
- &s5p6450_device_iis0,
- &s3c_device_fb,
- &smdk6450_lcd_lte480wv,
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc1,
- &s3c_device_hsmmc2,
- /* s5p6450_device_spi0 will be added */
-};
-
-static struct s3c_sdhci_platdata smdk6450_hsmmc0_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_NONE,
-};
-
-static struct s3c_sdhci_platdata smdk6450_hsmmc1_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_NONE,
-#if defined(CONFIG_S5P64X0_SD_CH1_8BIT)
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdk6450_hsmmc2_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_NONE,
-};
-
-static struct s3c2410_platform_i2c s5p6450_i2c0_data __initdata = {
- .flags = 0,
- .slave_addr = 0x10,
- .frequency = 100*1000,
- .sda_delay = 100,
- .cfg_gpio = s5p6450_i2c0_cfg_gpio,
-};
-
-static struct s3c2410_platform_i2c s5p6450_i2c1_data __initdata = {
- .flags = 0,
- .bus_num = 1,
- .slave_addr = 0x10,
- .frequency = 100*1000,
- .sda_delay = 100,
- .cfg_gpio = s5p6450_i2c1_cfg_gpio,
-};
-
-static struct i2c_board_info smdk6450_i2c_devs0[] __initdata = {
- { I2C_BOARD_INFO("wm8580", 0x1b), },
- { I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung KS24C080C EEPROM */
-};
-
-static struct i2c_board_info smdk6450_i2c_devs1[] __initdata = {
- { I2C_BOARD_INFO("24c128", 0x57), },/* Samsung S524AD0XD1 EEPROM */
-};
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdk6450_bl_gpio_info = {
- .no = S5P6450_GPF(15),
- .func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdk6450_bl_data = {
- .pwm_id = 1,
- .enable_gpio = -1,
-};
-
-static void __init smdk6450_map_io(void)
-{
- s5p64x0_init_io(NULL, 0);
- s3c24xx_init_clocks(19200000);
- s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void s5p6450_set_lcd_interface(void)
-{
- unsigned int cfg;
-
- /* select TFT LCD type (RGB I/F) */
- cfg = __raw_readl(S5P64X0_SPCON0);
- cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
- cfg |= S5P64X0_SPCON0_LCD_SEL_RGB;
- __raw_writel(cfg, S5P64X0_SPCON0);
-}
-
-static void __init smdk6450_machine_init(void)
-{
- s3c24xx_ts_set_platdata(NULL);
-
- s3c_i2c0_set_platdata(&s5p6450_i2c0_data);
- s3c_i2c1_set_platdata(&s5p6450_i2c1_data);
- i2c_register_board_info(0, smdk6450_i2c_devs0,
- ARRAY_SIZE(smdk6450_i2c_devs0));
- i2c_register_board_info(1, smdk6450_i2c_devs1,
- ARRAY_SIZE(smdk6450_i2c_devs1));
-
- s5p6450_set_lcd_interface();
- s3c_fb_set_platdata(&smdk6450_lcd_pdata);
-
- s3c_sdhci0_set_platdata(&smdk6450_hsmmc0_pdata);
- s3c_sdhci1_set_platdata(&smdk6450_hsmmc1_pdata);
- s3c_sdhci2_set_platdata(&smdk6450_hsmmc2_pdata);
-
- platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices));
-
- samsung_bl_set(&smdk6450_bl_gpio_info, &smdk6450_bl_data);
-}
-
-MACHINE_START(SMDK6450, "SMDK6450")
- /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .atag_offset = 0x100,
-
- .init_irq = s5p6450_init_irq,
- .map_io = smdk6450_map_io,
- .init_machine = smdk6450_machine_init,
- .init_time = samsung_timer_init,
- .restart = s5p64x0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c
deleted file mode 100644
index ec8229cee716..000000000000
--- a/arch/arm/mach-s5p64x0/pm.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/pm.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 Power Management Support
- *
- * Based on arch/arm/mach-s3c64xx/pm.c by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/suspend.h>
-#include <linux/syscore_ops.h>
-#include <linux/io.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/wakeup-mask.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-static struct sleep_save s5p64x0_core_save[] = {
- SAVE_ITEM(S5P64X0_APLL_CON),
- SAVE_ITEM(S5P64X0_MPLL_CON),
- SAVE_ITEM(S5P64X0_EPLL_CON),
- SAVE_ITEM(S5P64X0_EPLL_CON_K),
- SAVE_ITEM(S5P64X0_CLK_SRC0),
- SAVE_ITEM(S5P64X0_CLK_SRC1),
- SAVE_ITEM(S5P64X0_CLK_DIV0),
- SAVE_ITEM(S5P64X0_CLK_DIV1),
- SAVE_ITEM(S5P64X0_CLK_DIV2),
- SAVE_ITEM(S5P64X0_CLK_DIV3),
- SAVE_ITEM(S5P64X0_CLK_GATE_MEM0),
- SAVE_ITEM(S5P64X0_CLK_GATE_HCLK1),
- SAVE_ITEM(S5P64X0_CLK_GATE_SCLK1),
-};
-
-static struct sleep_save s5p64x0_misc_save[] = {
- SAVE_ITEM(S5P64X0_AHB_CON0),
- SAVE_ITEM(S5P64X0_SPCON0),
- SAVE_ITEM(S5P64X0_SPCON1),
- SAVE_ITEM(S5P64X0_MEM0CONSLP0),
- SAVE_ITEM(S5P64X0_MEM0CONSLP1),
- SAVE_ITEM(S5P64X0_MEM0DRVCON),
- SAVE_ITEM(S5P64X0_MEM1DRVCON),
-};
-
-/* DPLL is present only in S5P6450 */
-static struct sleep_save s5p6450_core_save[] = {
- SAVE_ITEM(S5P6450_DPLL_CON),
- SAVE_ITEM(S5P6450_DPLL_CON_K),
-};
-
-void s3c_pm_configure_extint(void)
-{
- __raw_writel(s3c_irqwake_eintmask, S5P64X0_EINT_WAKEUP_MASK);
-}
-
-void s3c_pm_restore_core(void)
-{
- __raw_writel(0, S5P64X0_EINT_WAKEUP_MASK);
-
- s3c_pm_do_restore_core(s5p64x0_core_save,
- ARRAY_SIZE(s5p64x0_core_save));
-
- if (soc_is_s5p6450())
- s3c_pm_do_restore_core(s5p6450_core_save,
- ARRAY_SIZE(s5p6450_core_save));
-
- s3c_pm_do_restore(s5p64x0_misc_save, ARRAY_SIZE(s5p64x0_misc_save));
-}
-
-void s3c_pm_save_core(void)
-{
- s3c_pm_do_save(s5p64x0_misc_save, ARRAY_SIZE(s5p64x0_misc_save));
-
- if (soc_is_s5p6450())
- s3c_pm_do_save(s5p6450_core_save,
- ARRAY_SIZE(s5p6450_core_save));
-
- s3c_pm_do_save(s5p64x0_core_save, ARRAY_SIZE(s5p64x0_core_save));
-}
-
-static int s5p64x0_cpu_suspend(unsigned long arg)
-{
- unsigned long tmp = 0;
-
- /*
- * Issue the standby signal into the pm unit. Note, we
- * issue a write-buffer drain just in case.
- */
- asm("b 1f\n\t"
- ".align 5\n\t"
- "1:\n\t"
- "mcr p15, 0, %0, c7, c10, 5\n\t"
- "mcr p15, 0, %0, c7, c10, 4\n\t"
- "mcr p15, 0, %0, c7, c0, 4" : : "r" (tmp));
-
- pr_info("Failed to suspend the system\n");
- return 1; /* Aborting suspend */
-}
-
-/* mapping of interrupts to parts of the wakeup mask */
-static struct samsung_wakeup_mask s5p64x0_wake_irqs[] = {
- { .irq = IRQ_RTC_ALARM, .bit = S5P64X0_PWR_CFG_RTC_ALRM_DISABLE, },
- { .irq = IRQ_RTC_TIC, .bit = S5P64X0_PWR_CFG_RTC_TICK_DISABLE, },
- { .irq = IRQ_HSMMC0, .bit = S5P64X0_PWR_CFG_MMC0_DISABLE, },
- { .irq = IRQ_HSMMC1, .bit = S5P64X0_PWR_CFG_MMC1_DISABLE, },
-};
-
-static void s5p64x0_pm_prepare(void)
-{
- u32 tmp;
-
- samsung_sync_wakemask(S5P64X0_PWR_CFG,
- s5p64x0_wake_irqs, ARRAY_SIZE(s5p64x0_wake_irqs));
-
- /* store the resume address in INFORM0 register */
- __raw_writel(virt_to_phys(s3c_cpu_resume), S5P64X0_INFORM0);
-
- /* setup clock gating for FIMGVG block */
- __raw_writel((__raw_readl(S5P64X0_CLK_GATE_HCLK1) | \
- (S5P64X0_CLK_GATE_HCLK1_FIMGVG)), S5P64X0_CLK_GATE_HCLK1);
- __raw_writel((__raw_readl(S5P64X0_CLK_GATE_SCLK1) | \
- (S5P64X0_CLK_GATE_SCLK1_FIMGVG)), S5P64X0_CLK_GATE_SCLK1);
-
- /* Configure the stabilization counter with wait time required */
- __raw_writel(S5P64X0_PWR_STABLE_PWR_CNT_VAL4, S5P64X0_PWR_STABLE);
-
- /* set WFI to SLEEP mode configuration */
- tmp = __raw_readl(S5P64X0_SLEEP_CFG);
- tmp &= ~(S5P64X0_SLEEP_CFG_OSC_EN);
- __raw_writel(tmp, S5P64X0_SLEEP_CFG);
-
- tmp = __raw_readl(S5P64X0_PWR_CFG);
- tmp &= ~(S5P64X0_PWR_CFG_WFI_MASK);
- tmp |= S5P64X0_PWR_CFG_WFI_SLEEP;
- __raw_writel(tmp, S5P64X0_PWR_CFG);
-
- /*
- * set OTHERS register to disable interrupt before going to
- * sleep. This bit is present only in S5P6450, it is reserved
- * in S5P6440.
- */
- if (soc_is_s5p6450()) {
- tmp = __raw_readl(S5P64X0_OTHERS);
- tmp |= S5P6450_OTHERS_DISABLE_INT;
- __raw_writel(tmp, S5P64X0_OTHERS);
- }
-
- /* ensure previous wakeup state is cleared before sleeping */
- __raw_writel(__raw_readl(S5P64X0_WAKEUP_STAT), S5P64X0_WAKEUP_STAT);
-
-}
-
-static int s5p64x0_pm_add(struct device *dev, struct subsys_interface *sif)
-{
- pm_cpu_prep = s5p64x0_pm_prepare;
- pm_cpu_sleep = s5p64x0_cpu_suspend;
-
- return 0;
-}
-
-static struct subsys_interface s5p64x0_pm_interface = {
- .name = "s5p64x0_pm",
- .subsys = &s5p64x0_subsys,
- .add_dev = s5p64x0_pm_add,
-};
-
-static __init int s5p64x0_pm_drvinit(void)
-{
- s3c_pm_init();
-
- return subsys_interface_register(&s5p64x0_pm_interface);
-}
-arch_initcall(s5p64x0_pm_drvinit);
-
-static void s5p64x0_pm_resume(void)
-{
- u32 tmp;
-
- tmp = __raw_readl(S5P64X0_OTHERS);
- tmp |= (S5P64X0_OTHERS_RET_MMC0 | S5P64X0_OTHERS_RET_MMC1 | \
- S5P64X0_OTHERS_RET_UART);
- __raw_writel(tmp , S5P64X0_OTHERS);
-}
-
-static struct syscore_ops s5p64x0_pm_syscore_ops = {
- .resume = s5p64x0_pm_resume,
-};
-
-static __init int s5p64x0_pm_syscore_init(void)
-{
- register_syscore_ops(&s5p64x0_pm_syscore_ops);
-
- return 0;
-}
-arch_initcall(s5p64x0_pm_syscore_init);
diff --git a/arch/arm/mach-s5p64x0/setup-fb-24bpp.c b/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
deleted file mode 100644
index f346ee4af54d..000000000000
--- a/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Base S5P64X0 GPIO setup information for LCD framebuffer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/fb.h>
-#include <linux/gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-
-void s5p64x0_fb_gpio_setup_24bpp(void)
-{
- if (soc_is_s5p6440()) {
- s3c_gpio_cfgrange_nopull(S5P6440_GPI(0), 16, S3C_GPIO_SFN(2));
- s3c_gpio_cfgrange_nopull(S5P6440_GPJ(0), 12, S3C_GPIO_SFN(2));
- } else if (soc_is_s5p6450()) {
- s3c_gpio_cfgrange_nopull(S5P6450_GPI(0), 16, S3C_GPIO_SFN(2));
- s3c_gpio_cfgrange_nopull(S5P6450_GPJ(0), 12, S3C_GPIO_SFN(2));
- }
-}
diff --git a/arch/arm/mach-s5p64x0/setup-i2c0.c b/arch/arm/mach-s5p64x0/setup-i2c0.c
deleted file mode 100644
index 569b76ac98cb..000000000000
--- a/arch/arm/mach-s5p64x0/setup-i2c0.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/setup-i2c0.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * I2C0 GPIO configuration.
- *
- * Based on plat-s3c64x0/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/gpio.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <plat/gpio-cfg.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include "i2c.h"
-
-void s5p6440_i2c0_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(S5P6440_GPB(5), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
-
-void s5p6450_i2c0_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(S5P6450_GPB(5), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev) { }
diff --git a/arch/arm/mach-s5p64x0/setup-i2c1.c b/arch/arm/mach-s5p64x0/setup-i2c1.c
deleted file mode 100644
index 867374e6d0bc..000000000000
--- a/arch/arm/mach-s5p64x0/setup-i2c1.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/* linux/arch/arm/mach-s5p64xx/setup-i2c1.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * I2C1 GPIO configuration.
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/gpio.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <plat/gpio-cfg.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include "i2c.h"
-
-void s5p6440_i2c1_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(S5P6440_GPR(9), 2,
- S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
-}
-
-void s5p6450_i2c1_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(S5P6450_GPR(9), 2,
- S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
-}
-
-void s3c_i2c1_cfg_gpio(struct platform_device *dev) { }
diff --git a/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c b/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
deleted file mode 100644
index 8410af0d12bf..000000000000
--- a/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P64X0 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/sdhci.h>
-#include <plat/cpu.h>
-
-void s5p64x0_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
- /* Set all the necessary GPG pins to special-function 2 */
- if (soc_is_s5p6450())
- s3c_gpio_cfgrange_nopull(S5P6450_GPG(0), 2 + width,
- S3C_GPIO_SFN(2));
- else
- s3c_gpio_cfgrange_nopull(S5P6440_GPG(0), 2 + width,
- S3C_GPIO_SFN(2));
-
- /* Set GPG[6] pin to special-function 2 - MMC0 CDn */
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- if (soc_is_s5p6450()) {
- s3c_gpio_setpull(S5P6450_GPG(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5P6450_GPG(6), S3C_GPIO_SFN(2));
- } else {
- s3c_gpio_setpull(S5P6440_GPG(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5P6440_GPG(6), S3C_GPIO_SFN(2));
- }
- }
-}
-
-void s5p64x0_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
- /* Set GPH[0:1] pins to special-function 2 - CLK and CMD */
- if (soc_is_s5p6450())
- s3c_gpio_cfgrange_nopull(S5P6450_GPH(0), 2, S3C_GPIO_SFN(2));
- else
- s3c_gpio_cfgrange_nopull(S5P6440_GPH(0), 2 , S3C_GPIO_SFN(2));
-
- switch (width) {
- case 8:
- /* Set data pins GPH[6:9] special-function 2 */
- if (soc_is_s5p6450())
- s3c_gpio_cfgrange_nopull(S5P6450_GPH(6), 4,
- S3C_GPIO_SFN(2));
- else
- s3c_gpio_cfgrange_nopull(S5P6440_GPH(6), 4,
- S3C_GPIO_SFN(2));
- case 4:
- /* set data pins GPH[2:5] special-function 2 */
- if (soc_is_s5p6450())
- s3c_gpio_cfgrange_nopull(S5P6450_GPH(2), 4,
- S3C_GPIO_SFN(2));
- else
- s3c_gpio_cfgrange_nopull(S5P6440_GPH(2), 4,
- S3C_GPIO_SFN(2));
- default:
- break;
- }
-
- /* Set GPG[6] pin to special-funtion 3 : MMC1 CDn */
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- if (soc_is_s5p6450()) {
- s3c_gpio_setpull(S5P6450_GPG(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5P6450_GPG(6), S3C_GPIO_SFN(3));
- } else {
- s3c_gpio_setpull(S5P6440_GPG(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5P6440_GPG(6), S3C_GPIO_SFN(3));
- }
- }
-}
-
-void s5p6440_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
-{
- /* Set GPC[4:5] pins to special-function 3 - CLK and CMD */
- s3c_gpio_cfgrange_nopull(S5P6440_GPC(4), 2, S3C_GPIO_SFN(3));
-
- /* Set data pins GPH[6:9] pins to special-function 3 */
- s3c_gpio_cfgrange_nopull(S5P6440_GPH(6), 4, S3C_GPIO_SFN(3));
-}
-
-void s5p6450_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
-{
- /* Set all the necessary GPG pins to special-function 3 */
- s3c_gpio_cfgrange_nopull(S5P6450_GPG(7), 2 + width, S3C_GPIO_SFN(3));
-}
diff --git a/arch/arm/mach-s5p64x0/setup-spi.c b/arch/arm/mach-s5p64x0/setup-spi.c
deleted file mode 100644
index 7664356720ca..000000000000
--- a/arch/arm/mach-s5p64x0/setup-spi.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/setup-spi.c
- *
- * Copyright (C) 2011 Samsung Electronics Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-
-#ifdef CONFIG_S3C64XX_DEV_SPI0
-int s3c64xx_spi0_cfg_gpio(void)
-{
- if (soc_is_s5p6450())
- s3c_gpio_cfgall_range(S5P6450_GPC(0), 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- else
- s3c_gpio_cfgall_range(S5P6440_GPC(0), 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- return 0;
-}
-#endif
-
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-int s3c64xx_spi1_cfg_gpio(void)
-{
- if (soc_is_s5p6450())
- s3c_gpio_cfgall_range(S5P6450_GPC(4), 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- else
- s3c_gpio_cfgall_range(S5P6440_GPC(4), 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- return 0;
-}
-#endif
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
deleted file mode 100644
index c5e3a969b063..000000000000
--- a/arch/arm/mach-s5pc100/Kconfig
+++ /dev/null
@@ -1,81 +0,0 @@
-# Copyright 2009 Samsung Electronics Co.
-# Byungho Min <bhmin@samsung.com>
-#
-# Licensed under GPLv2
-
-# Configuration options for the S5PC100 CPU
-
-if ARCH_S5PC100
-
-config CPU_S5PC100
- bool
- select ARM_AMBA
- select PL330_DMA if DMADEVICES
- select S5P_EXT_INT
- help
- Enable S5PC100 CPU support
-
-config S5PC100_SETUP_FB_24BPP
- bool
- help
- Common setup code for S5PC1XX with an 24bpp RGB display helper.
-
-config S5PC100_SETUP_I2C1
- bool
- help
- Common setup code for i2c bus 1.
-
-config S5PC100_SETUP_IDE
- bool
- help
- Common setup code for S5PC100 IDE GPIO configurations
-
-config S5PC100_SETUP_KEYPAD
- bool
- help
- Common setup code for KEYPAD GPIO configurations.
-
-config S5PC100_SETUP_SDHCI
- bool
- select S5PC100_SETUP_SDHCI_GPIO
- help
- Internal helper functions for S5PC100 based SDHCI systems
-
-config S5PC100_SETUP_SDHCI_GPIO
- bool
- help
- Common setup code for SDHCI gpio.
-
-config S5PC100_SETUP_SPI
- bool
- help
- Common setup code for SPI GPIO configurations.
-
-config MACH_SMDKC100
- bool "SMDKC100"
- select CPU_S5PC100
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_I2C1
- select S3C_DEV_RTC
- select S3C_DEV_WDT
- select S5PC100_SETUP_FB_24BPP
- select S5PC100_SETUP_I2C1
- select S5PC100_SETUP_IDE
- select S5PC100_SETUP_KEYPAD
- select S5PC100_SETUP_SDHCI
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_BACKLIGHT
- select SAMSUNG_DEV_IDE
- select SAMSUNG_DEV_KEYPAD
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_TS
- help
- Machine support for the Samsung SMDKC100
-
-endif
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
deleted file mode 100644
index 118c711f74e8..000000000000
--- a/arch/arm/mach-s5pc100/Makefile
+++ /dev/null
@@ -1,32 +0,0 @@
-# arch/arm/mach-s5pc100/Makefile
-#
-# Copyright 2009 Samsung Electronics Co.
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-# Core
-
-obj-y += common.o clock.o
-
-obj-y += dma.o
-
-# machine support
-
-obj-$(CONFIG_MACH_SMDKC100) += mach-smdkc100.o
-
-# device support
-
-obj-y += dev-audio.o
-
-obj-y += setup-i2c0.o
-obj-$(CONFIG_S5PC100_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S5PC100_SETUP_IDE) += setup-ide.o
-obj-$(CONFIG_S5PC100_SETUP_KEYPAD) += setup-keypad.o
-obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-obj-$(CONFIG_S5PC100_SETUP_SPI) += setup-spi.o
diff --git a/arch/arm/mach-s5pc100/Makefile.boot b/arch/arm/mach-s5pc100/Makefile.boot
deleted file mode 100644
index 79ece4055b02..000000000000
--- a/arch/arm/mach-s5pc100/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
- zreladdr-y += 0x20008000
-params_phys-y := 0x20000100
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
deleted file mode 100644
index d0dc10ee7729..000000000000
--- a/arch/arm/mach-s5pc100/clock.c
+++ /dev/null
@@ -1,1361 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/clock.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5PC100 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-
-#include <plat/cpu-freq.h>
-#include <mach/regs-clock.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-
-#include "common.h"
-
-static struct clk s5p_clk_otgphy = {
- .name = "otg_phy",
-};
-
-static struct clk dummy_apb_pclk = {
- .name = "apb_pclk",
- .id = -1,
-};
-
-static struct clk *clk_src_mout_href_list[] = {
- [0] = &s5p_clk_27m,
- [1] = &clk_fin_hpll,
-};
-
-static struct clksrc_sources clk_src_mout_href = {
- .sources = clk_src_mout_href_list,
- .nr_sources = ARRAY_SIZE(clk_src_mout_href_list),
-};
-
-static struct clksrc_clk clk_mout_href = {
- .clk = {
- .name = "mout_href",
- },
- .sources = &clk_src_mout_href,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 1 },
-};
-
-static struct clk *clk_src_mout_48m_list[] = {
- [0] = &clk_xusbxti,
- [1] = &s5p_clk_otgphy,
-};
-
-static struct clksrc_sources clk_src_mout_48m = {
- .sources = clk_src_mout_48m_list,
- .nr_sources = ARRAY_SIZE(clk_src_mout_48m_list),
-};
-
-static struct clksrc_clk clk_mout_48m = {
- .clk = {
- .name = "mout_48m",
- },
- .sources = &clk_src_mout_48m,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 24, .size = 1 },
-};
-
-static struct clksrc_clk clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
- },
- .sources = &clk_src_mpll,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
-};
-
-
-static struct clksrc_clk clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
- },
- .sources = &clk_src_apll,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk clk_mout_epll = {
- .clk = {
- .name = "mout_epll",
- },
- .sources = &clk_src_epll,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
-};
-
-static struct clk *clk_src_mout_hpll_list[] = {
- [0] = &s5p_clk_27m,
-};
-
-static struct clksrc_sources clk_src_mout_hpll = {
- .sources = clk_src_mout_hpll_list,
- .nr_sources = ARRAY_SIZE(clk_src_mout_hpll_list),
-};
-
-static struct clksrc_clk clk_mout_hpll = {
- .clk = {
- .name = "mout_hpll",
- },
- .sources = &clk_src_mout_hpll,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 },
-};
-
-static struct clksrc_clk clk_div_apll = {
- .clk = {
- .name = "div_apll",
- .parent = &clk_mout_apll.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk clk_div_arm = {
- .clk = {
- .name = "div_arm",
- .parent = &clk_div_apll.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_d0_bus = {
- .clk = {
- .name = "div_d0_bus",
- .parent = &clk_div_arm.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_pclkd0 = {
- .clk = {
- .name = "div_pclkd0",
- .parent = &clk_div_d0_bus.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_secss = {
- .clk = {
- .name = "div_secss",
- .parent = &clk_div_d0_bus.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_apll2 = {
- .clk = {
- .name = "div_apll2",
- .parent = &clk_mout_apll.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 3 },
-};
-
-static struct clk *clk_src_mout_am_list[] = {
- [0] = &clk_mout_mpll.clk,
- [1] = &clk_div_apll2.clk,
-};
-
-static struct clksrc_sources clk_src_mout_am = {
- .sources = clk_src_mout_am_list,
- .nr_sources = ARRAY_SIZE(clk_src_mout_am_list),
-};
-
-static struct clksrc_clk clk_mout_am = {
- .clk = {
- .name = "mout_am",
- },
- .sources = &clk_src_mout_am,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 1 },
-};
-
-static struct clksrc_clk clk_div_d1_bus = {
- .clk = {
- .name = "div_d1_bus",
- .parent = &clk_mout_am.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_mpll2 = {
- .clk = {
- .name = "div_mpll2",
- .parent = &clk_mout_am.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 1 },
-};
-
-static struct clksrc_clk clk_div_mpll = {
- .clk = {
- .name = "div_mpll",
- .parent = &clk_mout_am.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 2 },
-};
-
-static struct clk *clk_src_mout_onenand_list[] = {
- [0] = &clk_div_d0_bus.clk,
- [1] = &clk_div_d1_bus.clk,
-};
-
-static struct clksrc_sources clk_src_mout_onenand = {
- .sources = clk_src_mout_onenand_list,
- .nr_sources = ARRAY_SIZE(clk_src_mout_onenand_list),
-};
-
-static struct clksrc_clk clk_mout_onenand = {
- .clk = {
- .name = "mout_onenand",
- },
- .sources = &clk_src_mout_onenand,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 24, .size = 1 },
-};
-
-static struct clksrc_clk clk_div_onenand = {
- .clk = {
- .name = "div_onenand",
- .parent = &clk_mout_onenand.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV1, .shift = 20, .size = 2 },
-};
-
-static struct clksrc_clk clk_div_pclkd1 = {
- .clk = {
- .name = "div_pclkd1",
- .parent = &clk_div_d1_bus.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV1, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_cam = {
- .clk = {
- .name = "div_cam",
- .parent = &clk_div_mpll2.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV1, .shift = 24, .size = 5 },
-};
-
-static struct clksrc_clk clk_div_hdmi = {
- .clk = {
- .name = "div_hdmi",
- .parent = &clk_mout_hpll.clk,
- },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 28, .size = 4 },
-};
-
-static u32 epll_div[][4] = {
- { 32750000, 131, 3, 4 },
- { 32768000, 131, 3, 4 },
- { 36000000, 72, 3, 3 },
- { 45000000, 90, 3, 3 },
- { 45158000, 90, 3, 3 },
- { 45158400, 90, 3, 3 },
- { 48000000, 96, 3, 3 },
- { 49125000, 131, 4, 3 },
- { 49152000, 131, 4, 3 },
- { 60000000, 120, 3, 3 },
- { 67737600, 226, 5, 3 },
- { 67738000, 226, 5, 3 },
- { 73800000, 246, 5, 3 },
- { 73728000, 246, 5, 3 },
- { 72000000, 144, 3, 3 },
- { 84000000, 168, 3, 3 },
- { 96000000, 96, 3, 2 },
- { 144000000, 144, 3, 2 },
- { 192000000, 96, 3, 1 }
-};
-
-static int s5pc100_epll_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int epll_con;
- unsigned int i;
-
- if (clk->rate == rate) /* Return if nothing changed */
- return 0;
-
- epll_con = __raw_readl(S5P_EPLL_CON);
-
- epll_con &= ~(PLL65XX_MDIV_MASK | PLL65XX_PDIV_MASK | PLL65XX_SDIV_MASK);
-
- for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
- if (epll_div[i][0] == rate) {
- epll_con |= (epll_div[i][1] << PLL65XX_MDIV_SHIFT) |
- (epll_div[i][2] << PLL65XX_PDIV_SHIFT) |
- (epll_div[i][3] << PLL65XX_SDIV_SHIFT);
- break;
- }
- }
-
- if (i == ARRAY_SIZE(epll_div)) {
- printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
- return -EINVAL;
- }
-
- __raw_writel(epll_con, S5P_EPLL_CON);
-
- printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
- clk->rate, rate);
-
- clk->rate = rate;
-
- return 0;
-}
-
-static struct clk_ops s5pc100_epll_ops = {
- .get_rate = s5p_epll_get_rate,
- .set_rate = s5pc100_epll_set_rate,
-};
-
-static int s5pc100_d0_0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D00, clk, enable);
-}
-
-static int s5pc100_d0_1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D01, clk, enable);
-}
-
-static int s5pc100_d0_2_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D02, clk, enable);
-}
-
-static int s5pc100_d1_0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D10, clk, enable);
-}
-
-static int s5pc100_d1_1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D11, clk, enable);
-}
-
-static int s5pc100_d1_2_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D12, clk, enable);
-}
-
-static int s5pc100_d1_3_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D13, clk, enable);
-}
-
-static int s5pc100_d1_4_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D14, clk, enable);
-}
-
-static int s5pc100_d1_5_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_D15, clk, enable);
-}
-
-static int s5pc100_sclk0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_SCLK0, clk, enable);
-}
-
-static int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_SCLK1, clk, enable);
-}
-
-/*
- * The following clocks will be disabled during clock initialization. It is
- * recommended to keep the following clocks disabled until the driver requests
- * for enabling the clock.
- */
-static struct clk init_clocks_off[] = {
- {
- .name = "cssys",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_0_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "secss",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_0_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "g2d",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_0_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "mdma",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_0_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "cfcon",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_0_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "nfcon",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_1_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "onenandc",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_1_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "sdm",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_2_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "seckey",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_2_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "modemif",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "otg",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "usbhost",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "dma",
- .devname = "dma-pl330.1",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "dma",
- .devname = "dma-pl330.0",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "lcd",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_1_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "rotator",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_1_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "fimc",
- .devname = "s5p-fimc.0",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_1_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "fimc",
- .devname = "s5p-fimc.1",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_1_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "fimc",
- .devname = "s5p-fimc.2",
- .enable = s5pc100_d1_1_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "jpeg",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_1_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "mipi-dsim",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_1_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "mipi-csis",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_1_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "g3d",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "tv",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_2_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "vp",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_2_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "mixer",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_2_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "hdmi",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_2_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "mfc",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_2_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "apc",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_3_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "iec",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_3_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "systimer",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_3_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "watchdog",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_3_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "rtc",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_3_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.0",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.1",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "spi",
- .devname = "s5pc100-spi.0",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "spi",
- .devname = "s5pc100-spi.1",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "spi",
- .devname = "s5pc100-spi.2",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "irda",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "ccan",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "ccan",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "hsitx",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "hsirx",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 13),
- }, {
- .name = "ac97",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "pcm",
- .devname = "samsung-pcm.0",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "pcm",
- .devname = "samsung-pcm.1",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "spdif",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "adc",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "keypad",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "mmc_48m",
- .devname = "s3c-sdhci.0",
- .parent = &clk_mout_48m.clk,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = (1 << 15),
- }, {
- .name = "mmc_48m",
- .devname = "s3c-sdhci.1",
- .parent = &clk_mout_48m.clk,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = (1 << 16),
- }, {
- .name = "mmc_48m",
- .devname = "s3c-sdhci.2",
- .parent = &clk_mout_48m.clk,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = (1 << 17),
- },
-};
-
-static struct clk clk_hsmmc2 = {
- .name = "hsmmc",
- .devname = "s3c-sdhci.2",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 7),
-};
-
-static struct clk clk_hsmmc1 = {
- .name = "hsmmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 6),
-};
-
-static struct clk clk_hsmmc0 = {
- .name = "hsmmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 5),
-};
-
-static struct clk clk_48m_spi0 = {
- .name = "spi_48m",
- .devname = "s5pc100-spi.0",
- .parent = &clk_mout_48m.clk,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = (1 << 7),
-};
-
-static struct clk clk_48m_spi1 = {
- .name = "spi_48m",
- .devname = "s5pc100-spi.1",
- .parent = &clk_mout_48m.clk,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = (1 << 8),
-};
-
-static struct clk clk_48m_spi2 = {
- .name = "spi_48m",
- .devname = "s5pc100-spi.2",
- .parent = &clk_mout_48m.clk,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = (1 << 9),
-};
-
-static struct clk clk_i2s0 = {
- .name = "iis",
- .devname = "samsung-i2s.0",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 0),
-};
-
-static struct clk clk_i2s1 = {
- .name = "iis",
- .devname = "samsung-i2s.1",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 1),
-};
-
-static struct clk clk_i2s2 = {
- .name = "iis",
- .devname = "samsung-i2s.2",
- .parent = &clk_div_pclkd1.clk,
- .enable = s5pc100_d1_5_ctrl,
- .ctrlbit = (1 << 2),
-};
-
-static struct clk clk_vclk54m = {
- .name = "vclk_54m",
- .rate = 54000000,
-};
-
-static struct clk clk_i2scdclk0 = {
- .name = "i2s_cdclk0",
-};
-
-static struct clk clk_i2scdclk1 = {
- .name = "i2s_cdclk1",
-};
-
-static struct clk clk_i2scdclk2 = {
- .name = "i2s_cdclk2",
-};
-
-static struct clk clk_pcmcdclk0 = {
- .name = "pcm_cdclk0",
-};
-
-static struct clk clk_pcmcdclk1 = {
- .name = "pcm_cdclk1",
-};
-
-static struct clk *clk_src_group1_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll2.clk,
- [2] = &clk_fin_epll,
- [3] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_group1 = {
- .sources = clk_src_group1_list,
- .nr_sources = ARRAY_SIZE(clk_src_group1_list),
-};
-
-static struct clk *clk_src_group2_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll.clk,
-};
-
-static struct clksrc_sources clk_src_group2 = {
- .sources = clk_src_group2_list,
- .nr_sources = ARRAY_SIZE(clk_src_group2_list),
-};
-
-static struct clk *clk_src_group3_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll.clk,
- [2] = &clk_fin_epll,
- [3] = &clk_i2scdclk0,
- [4] = &clk_pcmcdclk0,
- [5] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_group3 = {
- .sources = clk_src_group3_list,
- .nr_sources = ARRAY_SIZE(clk_src_group3_list),
-};
-
-static struct clksrc_clk clk_sclk_audio0 = {
- .clk = {
- .name = "sclk_audio",
- .devname = "samsung-pcm.0",
- .ctrlbit = (1 << 8),
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clk_src_group3,
- .reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 3 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
-};
-
-static struct clk *clk_src_group4_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll.clk,
- [2] = &clk_fin_epll,
- [3] = &clk_i2scdclk1,
- [4] = &clk_pcmcdclk1,
- [5] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_group4 = {
- .sources = clk_src_group4_list,
- .nr_sources = ARRAY_SIZE(clk_src_group4_list),
-};
-
-static struct clksrc_clk clk_sclk_audio1 = {
- .clk = {
- .name = "sclk_audio",
- .devname = "samsung-pcm.1",
- .ctrlbit = (1 << 9),
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clk_src_group4,
- .reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 3 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
-};
-
-static struct clk *clk_src_group5_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll.clk,
- [2] = &clk_fin_epll,
- [3] = &clk_i2scdclk2,
- [4] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_group5 = {
- .sources = clk_src_group5_list,
- .nr_sources = ARRAY_SIZE(clk_src_group5_list),
-};
-
-static struct clksrc_clk clk_sclk_audio2 = {
- .clk = {
- .name = "sclk_audio",
- .devname = "samsung-pcm.2",
- .ctrlbit = (1 << 10),
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clk_src_group5,
- .reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 3 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
-};
-
-static struct clk *clk_src_group6_list[] = {
- [0] = &s5p_clk_27m,
- [1] = &clk_vclk54m,
- [2] = &clk_div_hdmi.clk,
-};
-
-static struct clksrc_sources clk_src_group6 = {
- .sources = clk_src_group6_list,
- .nr_sources = ARRAY_SIZE(clk_src_group6_list),
-};
-
-static struct clk *clk_src_group7_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll.clk,
- [2] = &clk_mout_hpll.clk,
- [3] = &clk_vclk54m,
-};
-
-static struct clksrc_sources clk_src_group7 = {
- .sources = clk_src_group7_list,
- .nr_sources = ARRAY_SIZE(clk_src_group7_list),
-};
-
-static struct clk *clk_src_mmc0_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll.clk,
- [2] = &clk_fin_epll,
-};
-
-static struct clksrc_sources clk_src_mmc0 = {
- .sources = clk_src_mmc0_list,
- .nr_sources = ARRAY_SIZE(clk_src_mmc0_list),
-};
-
-static struct clk *clk_src_mmc12_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll.clk,
- [2] = &clk_fin_epll,
- [3] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_mmc12 = {
- .sources = clk_src_mmc12_list,
- .nr_sources = ARRAY_SIZE(clk_src_mmc12_list),
-};
-
-static struct clk *clk_src_irda_usb_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_div_mpll.clk,
- [2] = &clk_fin_epll,
- [3] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_irda_usb = {
- .sources = clk_src_irda_usb_list,
- .nr_sources = ARRAY_SIZE(clk_src_irda_usb_list),
-};
-
-static struct clk *clk_src_pwi_list[] = {
- [0] = &clk_fin_epll,
- [1] = &clk_mout_epll.clk,
- [2] = &clk_div_mpll.clk,
-};
-
-static struct clksrc_sources clk_src_pwi = {
- .sources = clk_src_pwi_list,
- .nr_sources = ARRAY_SIZE(clk_src_pwi_list),
-};
-
-static struct clk *clk_sclk_spdif_list[] = {
- [0] = &clk_sclk_audio0.clk,
- [1] = &clk_sclk_audio1.clk,
- [2] = &clk_sclk_audio2.clk,
-};
-
-static struct clksrc_sources clk_src_sclk_spdif = {
- .sources = clk_sclk_spdif_list,
- .nr_sources = ARRAY_SIZE(clk_sclk_spdif_list),
-};
-
-static struct clksrc_clk clk_sclk_spdif = {
- .clk = {
- .name = "sclk_spdif",
- .ctrlbit = (1 << 11),
- .enable = s5pc100_sclk1_ctrl,
- .ops = &s5p_sclk_spdif_ops,
- },
- .sources = &clk_src_sclk_spdif,
- .reg_src = { .reg = S5P_CLK_SRC3, .shift = 24, .size = 2 },
-};
-
-static struct clksrc_clk clksrcs[] = {
- {
- .clk = {
- .name = "sclk_mixer",
- .ctrlbit = (1 << 6),
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clk_src_group6,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 28, .size = 2 },
- }, {
- .clk = {
- .name = "sclk_lcd",
- .ctrlbit = (1 << 0),
- .enable = s5pc100_sclk1_ctrl,
-
- },
- .sources = &clk_src_group7,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 12, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "s5p-fimc.0",
- .ctrlbit = (1 << 1),
- .enable = s5pc100_sclk1_ctrl,
-
- },
- .sources = &clk_src_group7,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 16, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "s5p-fimc.1",
- .ctrlbit = (1 << 2),
- .enable = s5pc100_sclk1_ctrl,
-
- },
- .sources = &clk_src_group7,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 20, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "s5p-fimc.2",
- .ctrlbit = (1 << 3),
- .enable = s5pc100_sclk1_ctrl,
-
- },
- .sources = &clk_src_group7,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 24, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 24, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_irda",
- .ctrlbit = (1 << 10),
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clk_src_irda_usb,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_irda",
- .ctrlbit = (1 << 10),
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clk_src_mmc12,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 16, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_pwi",
- .ctrlbit = (1 << 1),
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clk_src_pwi,
- .reg_src = { .reg = S5P_CLK_SRC3, .shift = 0, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 3 },
- }, {
- .clk = {
- .name = "sclk_uhost",
- .ctrlbit = (1 << 11),
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clk_src_irda_usb,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 20, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 20, .size = 4 },
- },
-};
-
-static struct clksrc_clk clk_sclk_uart = {
- .clk = {
- .name = "uclk1",
- .ctrlbit = (1 << 3),
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clk_src_group2,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc0 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.0",
- .ctrlbit = (1 << 12),
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clk_src_mmc0,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc1 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.1",
- .ctrlbit = (1 << 13),
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clk_src_mmc12,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc2 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.2",
- .ctrlbit = (1 << 14),
- .enable = s5pc100_sclk1_ctrl,
- },
- .sources = &clk_src_mmc12,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi0 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "s5pc100-spi.0",
- .ctrlbit = (1 << 4),
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clk_src_group1,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi1 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "s5pc100-spi.1",
- .ctrlbit = (1 << 5),
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clk_src_group1,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi2 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "s5pc100-spi.2",
- .ctrlbit = (1 << 6),
- .enable = s5pc100_sclk0_ctrl,
- },
- .sources = &clk_src_group1,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 12, .size = 4 },
-};
-
-/* Clock initialisation code */
-static struct clksrc_clk *sysclks[] = {
- &clk_mout_apll,
- &clk_mout_epll,
- &clk_mout_mpll,
- &clk_mout_hpll,
- &clk_mout_href,
- &clk_mout_48m,
- &clk_div_apll,
- &clk_div_arm,
- &clk_div_d0_bus,
- &clk_div_pclkd0,
- &clk_div_secss,
- &clk_div_apll2,
- &clk_mout_am,
- &clk_div_d1_bus,
- &clk_div_mpll2,
- &clk_div_mpll,
- &clk_mout_onenand,
- &clk_div_onenand,
- &clk_div_pclkd1,
- &clk_div_cam,
- &clk_div_hdmi,
- &clk_sclk_audio0,
- &clk_sclk_audio1,
- &clk_sclk_audio2,
- &clk_sclk_spdif,
-};
-
-static struct clk *clk_cdev[] = {
- &clk_hsmmc0,
- &clk_hsmmc1,
- &clk_hsmmc2,
- &clk_48m_spi0,
- &clk_48m_spi1,
- &clk_48m_spi2,
- &clk_i2s0,
- &clk_i2s1,
- &clk_i2s2,
-};
-
-static struct clksrc_clk *clksrc_cdev[] = {
- &clk_sclk_uart,
- &clk_sclk_mmc0,
- &clk_sclk_mmc1,
- &clk_sclk_mmc2,
- &clk_sclk_spi0,
- &clk_sclk_spi1,
- &clk_sclk_spi2,
-};
-
-void __init_or_cpufreq s5pc100_setup_clocks(void)
-{
- unsigned long xtal;
- unsigned long arm;
- unsigned long hclkd0;
- unsigned long hclkd1;
- unsigned long pclkd0;
- unsigned long pclkd1;
- unsigned long apll;
- unsigned long mpll;
- unsigned long epll;
- unsigned long hpll;
- unsigned int ptr;
-
- /* Set S5PC100 functions for clk_fout_epll */
- clk_fout_epll.enable = s5p_epll_enable;
- clk_fout_epll.ops = &s5pc100_epll_ops;
-
- printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
- xtal = clk_get_rate(&clk_xtal);
-
- printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
- apll = s5p_get_pll65xx(xtal, __raw_readl(S5P_APLL_CON));
- mpll = s5p_get_pll65xx(xtal, __raw_readl(S5P_MPLL_CON));
- epll = s5p_get_pll65xx(xtal, __raw_readl(S5P_EPLL_CON));
- hpll = s5p_get_pll65xx(xtal, __raw_readl(S5P_HPLL_CON));
-
- printk(KERN_INFO "S5PC100: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz, E=%ld.%ldMHz, H=%ld.%ldMHz\n",
- print_mhz(apll), print_mhz(mpll), print_mhz(epll), print_mhz(hpll));
-
- clk_fout_apll.rate = apll;
- clk_fout_mpll.rate = mpll;
- clk_fout_epll.rate = epll;
- clk_mout_hpll.clk.rate = hpll;
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
- s3c_set_clksrc(&clksrcs[ptr], true);
-
- arm = clk_get_rate(&clk_div_arm.clk);
- hclkd0 = clk_get_rate(&clk_div_d0_bus.clk);
- pclkd0 = clk_get_rate(&clk_div_pclkd0.clk);
- hclkd1 = clk_get_rate(&clk_div_d1_bus.clk);
- pclkd1 = clk_get_rate(&clk_div_pclkd1.clk);
-
- printk(KERN_INFO "S5PC100: HCLKD0=%ld.%ldMHz, HCLKD1=%ld.%ldMHz, PCLKD0=%ld.%ldMHz, PCLKD1=%ld.%ldMHz\n",
- print_mhz(hclkd0), print_mhz(hclkd1), print_mhz(pclkd0), print_mhz(pclkd1));
-
- clk_f.rate = arm;
- clk_h.rate = hclkd1;
- clk_p.rate = pclkd1;
-}
-
-/*
- * The following clocks will be enabled during clock initialization.
- */
-static struct clk init_clocks[] = {
- {
- .name = "tzic",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_0_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "intc",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_0_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "ebi",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_1_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "intmem",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_1_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "sromc",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_1_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "dmc",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_1_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "chipid",
- .parent = &clk_div_d0_bus.clk,
- .enable = s5pc100_d0_1_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "gpio",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_3_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.0",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.1",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.2",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.3",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_4_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "timers",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_3_ctrl,
- .ctrlbit = (1 << 6),
- },
-};
-
-static struct clk *clks[] __initdata = {
- &clk_ext,
- &clk_i2scdclk0,
- &clk_i2scdclk1,
- &clk_i2scdclk2,
- &clk_pcmcdclk0,
- &clk_pcmcdclk1,
-};
-
-static struct clk_lookup s5pc100_clk_lookup[] = {
- CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
- CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uart.clk),
- CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0),
- CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1),
- CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2),
- CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
- CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
- CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
- CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
- CLKDEV_INIT("s5pc100-spi.0", "spi_busclk1", &clk_48m_spi0),
- CLKDEV_INIT("s5pc100-spi.0", "spi_busclk2", &clk_sclk_spi0.clk),
- CLKDEV_INIT("s5pc100-spi.1", "spi_busclk1", &clk_48m_spi1),
- CLKDEV_INIT("s5pc100-spi.1", "spi_busclk2", &clk_sclk_spi1.clk),
- CLKDEV_INIT("s5pc100-spi.2", "spi_busclk1", &clk_48m_spi2),
- CLKDEV_INIT("s5pc100-spi.2", "spi_busclk2", &clk_sclk_spi2.clk),
- CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0),
- CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1),
- CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2),
-};
-
-void __init s5pc100_register_clocks(void)
-{
- int ptr;
-
- s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
- for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
- s3c_register_clksrc(sysclks[ptr], 1);
-
- s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
- s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
- for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
- s3c_register_clksrc(clksrc_cdev[ptr], 1);
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- clkdev_add_table(s5pc100_clk_lookup, ARRAY_SIZE(s5pc100_clk_lookup));
-
- s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
- for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
- s3c_disable_clocks(clk_cdev[ptr], 1);
-
- s3c24xx_register_clock(&dummy_apb_pclk);
-}
diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c
deleted file mode 100644
index 6a41bf7dacf6..000000000000
--- a/arch/arm/mach-s5pc100/common.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * Common Codes for S5PC100
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <clocksource/samsung_pwm.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/reboot.h>
-
-#include <asm/irq.h>
-#include <asm/proc-fns.h>
-#include <asm/system_misc.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/map.h>
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/sdhci.h>
-#include <plat/adc-core.h>
-#include <plat/ata-core.h>
-#include <plat/fb-core.h>
-#include <plat/iic-core.h>
-#include <plat/onenand-core.h>
-#include <plat/pwm-core.h>
-#include <plat/spi-core.h>
-#include <plat/watchdog-reset.h>
-
-#include "common.h"
-
-static const char name_s5pc100[] = "S5PC100";
-
-static struct cpu_table cpu_ids[] __initdata = {
- {
- .idcode = S5PC100_CPU_ID,
- .idmask = S5PC100_CPU_MASK,
- .map_io = s5pc100_map_io,
- .init_clocks = s5pc100_init_clocks,
- .init_uarts = s5pc100_init_uarts,
- .init = s5pc100_init,
- .name = name_s5pc100,
- },
-};
-
-/* Initial IO mappings */
-
-static struct map_desc s5pc100_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_CHIPID,
- .pfn = __phys_to_pfn(S5PC100_PA_CHIPID),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_SYS,
- .pfn = __phys_to_pfn(S5PC100_PA_SYSCON),
- .length = SZ_64K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_TIMER,
- .pfn = __phys_to_pfn(S5PC100_PA_TIMER),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_WATCHDOG,
- .pfn = __phys_to_pfn(S5PC100_PA_WATCHDOG),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_SROMC,
- .pfn = __phys_to_pfn(S5PC100_PA_SROMC),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_SYSTIMER,
- .pfn = __phys_to_pfn(S5PC100_PA_SYSTIMER),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GPIO,
- .pfn = __phys_to_pfn(S5PC100_PA_GPIO),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC0,
- .pfn = __phys_to_pfn(S5PC100_PA_VIC0),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC1,
- .pfn = __phys_to_pfn(S5PC100_PA_VIC1),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC2,
- .pfn = __phys_to_pfn(S5PC100_PA_VIC2),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(S3C_PA_UART),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5PC100_VA_OTHERS,
- .pfn = __phys_to_pfn(S5PC100_PA_OTHERS),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }
-};
-
-static struct samsung_pwm_variant s5pc100_pwm_variant = {
- .bits = 32,
- .div_base = 0,
- .has_tint_cstat = true,
- .tclk_mask = (1 << 5),
-};
-
-void __init samsung_set_timer_source(unsigned int event, unsigned int source)
-{
- s5pc100_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
- s5pc100_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
-}
-
-void __init samsung_timer_init(void)
-{
- unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
- IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
- IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
- };
-
- samsung_pwm_clocksource_init(S3C_VA_TIMER,
- timer_irqs, &s5pc100_pwm_variant);
-}
-
-/*
- * s5pc100_map_io
- *
- * register the standard CPU IO areas
- */
-
-void __init s5pc100_init_io(struct map_desc *mach_desc, int size)
-{
- /* initialize the io descriptors we need for initialization */
- iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
- if (mach_desc)
- iotable_init(mach_desc, size);
-
- /* detect cpu id and rev. */
- s5p_init_cpu(S5P_VA_CHIPID);
-
- s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
-
- samsung_pwm_set_platdata(&s5pc100_pwm_variant);
-}
-
-void __init s5pc100_map_io(void)
-{
- /* initialise device information early */
- s5pc100_default_sdhci0();
- s5pc100_default_sdhci1();
- s5pc100_default_sdhci2();
-
- s3c_adc_setname("s3c64xx-adc");
-
- /* the i2c devices are directly compatible with s3c2440 */
- s3c_i2c0_setname("s3c2440-i2c");
- s3c_i2c1_setname("s3c2440-i2c");
-
- s3c_onenand_setname("s5pc100-onenand");
- s3c_fb_setname("s5pc100-fb");
- s3c_cfcon_setname("s5pc100-pata");
-
- s3c64xx_spi_setname("s5pc100-spi");
-}
-
-void __init s5pc100_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
- s3c24xx_register_baseclocks(xtal);
- s5p_register_clocks(xtal);
- s5pc100_register_clocks();
- s5pc100_setup_clocks();
- samsung_wdt_reset_init(S3C_VA_WATCHDOG);
-}
-
-void __init s5pc100_init_irq(void)
-{
- u32 vic[] = {~0, ~0, ~0};
-
- /* VIC0, VIC1, and VIC2 are fully populated. */
- s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-
-static struct bus_type s5pc100_subsys = {
- .name = "s5pc100-core",
- .dev_name = "s5pc100-core",
-};
-
-static struct device s5pc100_dev = {
- .bus = &s5pc100_subsys,
-};
-
-static int __init s5pc100_core_init(void)
-{
- return subsys_system_register(&s5pc100_subsys, NULL);
-}
-core_initcall(s5pc100_core_init);
-
-int __init s5pc100_init(void)
-{
- printk(KERN_INFO "S5PC100: Initializing architecture\n");
- return device_register(&s5pc100_dev);
-}
-
-/* uart registration process */
-
-void __init s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
-}
-
-void s5pc100_restart(enum reboot_mode mode, const char *cmd)
-{
- if (mode != REBOOT_SOFT)
- samsung_wdt_reset();
-
- soft_restart(0);
-}
diff --git a/arch/arm/mach-s5pc100/common.h b/arch/arm/mach-s5pc100/common.h
deleted file mode 100644
index 08d782d65d7b..000000000000
--- a/arch/arm/mach-s5pc100/common.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Common Header for S5PC100 machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_S5PC100_COMMON_H
-#define __ARCH_ARM_MACH_S5PC100_COMMON_H
-
-#include <linux/reboot.h>
-
-void s5pc100_init_io(struct map_desc *mach_desc, int size);
-void s5pc100_init_irq(void);
-
-void s5pc100_register_clocks(void);
-void s5pc100_setup_clocks(void);
-
-void s5pc100_restart(enum reboot_mode mode, const char *cmd);
-
-extern int s5pc100_init(void);
-extern void s5pc100_map_io(void);
-extern void s5pc100_init_clocks(int xtal);
-extern void s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-#endif /* __ARCH_ARM_MACH_S5PC100_COMMON_H */
diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c
deleted file mode 100644
index 46f488b09391..000000000000
--- a/arch/arm/mach-s5pc100/dev-audio.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/dev-audio.c
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <linux/platform_data/asoc-s3c.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-
-static int s5pc100_cfg_i2s(struct platform_device *pdev)
-{
- /* configure GPIO for i2s port */
- switch (pdev->id) {
- case 0: /* Dedicated pins */
- break;
- case 1:
- s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(2));
- break;
- case 2:
- s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(4));
- break;
- default:
- printk(KERN_ERR "Invalid Device %d\n", pdev->id);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct s3c_audio_pdata i2sv5_pdata = {
- .cfg_gpio = s5pc100_cfg_i2s,
- .type = {
- .i2s = {
- .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
- | QUIRK_NEED_RSTCLR,
- },
- },
-};
-
-static struct resource s5pc100_iis0_resource[] = {
- [0] = DEFINE_RES_MEM(S5PC100_PA_I2S0, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_I2S0_TX),
- [2] = DEFINE_RES_DMA(DMACH_I2S0_RX),
- [3] = DEFINE_RES_DMA(DMACH_I2S0S_TX),
-};
-
-struct platform_device s5pc100_device_iis0 = {
- .name = "samsung-i2s",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5pc100_iis0_resource),
- .resource = s5pc100_iis0_resource,
- .dev = {
- .platform_data = &i2sv5_pdata,
- },
-};
-
-static struct s3c_audio_pdata i2sv3_pdata = {
- .cfg_gpio = s5pc100_cfg_i2s,
-};
-
-static struct resource s5pc100_iis1_resource[] = {
- [0] = DEFINE_RES_MEM(S5PC100_PA_I2S1, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_I2S1_TX),
- [2] = DEFINE_RES_DMA(DMACH_I2S1_RX),
-};
-
-struct platform_device s5pc100_device_iis1 = {
- .name = "samsung-i2s",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5pc100_iis1_resource),
- .resource = s5pc100_iis1_resource,
- .dev = {
- .platform_data = &i2sv3_pdata,
- },
-};
-
-static struct resource s5pc100_iis2_resource[] = {
- [0] = DEFINE_RES_MEM(S5PC100_PA_I2S2, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_I2S2_TX),
- [2] = DEFINE_RES_DMA(DMACH_I2S2_RX),
-};
-
-struct platform_device s5pc100_device_iis2 = {
- .name = "samsung-i2s",
- .id = 2,
- .num_resources = ARRAY_SIZE(s5pc100_iis2_resource),
- .resource = s5pc100_iis2_resource,
- .dev = {
- .platform_data = &i2sv3_pdata,
- },
-};
-
-/* PCM Controller platform_devices */
-
-static int s5pc100_pcm_cfg_gpio(struct platform_device *pdev)
-{
- switch (pdev->id) {
- case 0:
- s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(5));
- break;
-
- case 1:
- s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(3));
- break;
-
- default:
- printk(KERN_DEBUG "Invalid PCM Controller number!");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct s3c_audio_pdata s3c_pcm_pdata = {
- .cfg_gpio = s5pc100_pcm_cfg_gpio,
-};
-
-static struct resource s5pc100_pcm0_resource[] = {
- [0] = DEFINE_RES_MEM(S5PC100_PA_PCM0, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_PCM0_TX),
- [2] = DEFINE_RES_DMA(DMACH_PCM0_RX),
-};
-
-struct platform_device s5pc100_device_pcm0 = {
- .name = "samsung-pcm",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5pc100_pcm0_resource),
- .resource = s5pc100_pcm0_resource,
- .dev = {
- .platform_data = &s3c_pcm_pdata,
- },
-};
-
-static struct resource s5pc100_pcm1_resource[] = {
- [0] = DEFINE_RES_MEM(S5PC100_PA_PCM1, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_PCM1_TX),
- [2] = DEFINE_RES_DMA(DMACH_PCM1_RX),
-};
-
-struct platform_device s5pc100_device_pcm1 = {
- .name = "samsung-pcm",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5pc100_pcm1_resource),
- .resource = s5pc100_pcm1_resource,
- .dev = {
- .platform_data = &s3c_pcm_pdata,
- },
-};
-
-/* AC97 Controller platform devices */
-
-static int s5pc100_ac97_cfg_gpio(struct platform_device *pdev)
-{
- return s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(4));
-}
-
-static struct resource s5pc100_ac97_resource[] = {
- [0] = DEFINE_RES_MEM(S5PC100_PA_AC97, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT),
- [2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN),
- [3] = DEFINE_RES_DMA(DMACH_AC97_MICIN),
- [4] = DEFINE_RES_IRQ(IRQ_AC97),
-};
-
-static struct s3c_audio_pdata s3c_ac97_pdata = {
- .cfg_gpio = s5pc100_ac97_cfg_gpio,
-};
-
-static u64 s5pc100_ac97_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5pc100_device_ac97 = {
- .name = "samsung-ac97",
- .id = -1,
- .num_resources = ARRAY_SIZE(s5pc100_ac97_resource),
- .resource = s5pc100_ac97_resource,
- .dev = {
- .platform_data = &s3c_ac97_pdata,
- .dma_mask = &s5pc100_ac97_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-/* S/PDIF Controller platform_device */
-static int s5pc100_spdif_cfg_gpd(struct platform_device *pdev)
-{
- s3c_gpio_cfgpin_range(S5PC100_GPD(5), 2, S3C_GPIO_SFN(3));
-
- return 0;
-}
-
-static int s5pc100_spdif_cfg_gpg3(struct platform_device *pdev)
-{
- s3c_gpio_cfgpin_range(S5PC100_GPG3(5), 2, S3C_GPIO_SFN(3));
-
- return 0;
-}
-
-static struct resource s5pc100_spdif_resource[] = {
- [0] = DEFINE_RES_MEM(S5PC100_PA_SPDIF, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_SPDIF),
-};
-
-static struct s3c_audio_pdata s5p_spdif_pdata = {
- .cfg_gpio = s5pc100_spdif_cfg_gpd,
-};
-
-static u64 s5pc100_spdif_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5pc100_device_spdif = {
- .name = "samsung-spdif",
- .id = -1,
- .num_resources = ARRAY_SIZE(s5pc100_spdif_resource),
- .resource = s5pc100_spdif_resource,
- .dev = {
- .platform_data = &s5p_spdif_pdata,
- .dma_mask = &s5pc100_spdif_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-void __init s5pc100_spdif_setup_gpio(int gpio)
-{
- if (gpio == S5PC100_SPDIF_GPD)
- s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpd;
- else
- s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpg3;
-}
diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c
deleted file mode 100644
index b1418409709e..000000000000
--- a/arch/arm/mach-s5pc100/dma.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/dma.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl330.h>
-
-#include <asm/irq.h>
-#include <plat/devs.h>
-#include <plat/irqs.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/dma.h>
-
-static u8 pdma0_peri[] = {
- DMACH_UART0_RX,
- DMACH_UART0_TX,
- DMACH_UART1_RX,
- DMACH_UART1_TX,
- DMACH_UART2_RX,
- DMACH_UART2_TX,
- DMACH_UART3_RX,
- DMACH_UART3_TX,
- DMACH_IRDA,
- DMACH_I2S0_RX,
- DMACH_I2S0_TX,
- DMACH_I2S0S_TX,
- DMACH_I2S1_RX,
- DMACH_I2S1_TX,
- DMACH_I2S2_RX,
- DMACH_I2S2_TX,
- DMACH_SPI0_RX,
- DMACH_SPI0_TX,
- DMACH_SPI1_RX,
- DMACH_SPI1_TX,
- DMACH_SPI2_RX,
- DMACH_SPI2_TX,
- DMACH_AC97_MICIN,
- DMACH_AC97_PCMIN,
- DMACH_AC97_PCMOUT,
- DMACH_EXTERNAL,
- DMACH_PWM,
- DMACH_SPDIF,
- DMACH_HSI_RX,
- DMACH_HSI_TX,
-};
-
-static struct dma_pl330_platdata s5pc100_pdma0_pdata = {
- .nr_valid_peri = ARRAY_SIZE(pdma0_peri),
- .peri_id = pdma0_peri,
-};
-
-static AMBA_AHB_DEVICE(s5pc100_pdma0, "dma-pl330.0", 0x00041330,
- S5PC100_PA_PDMA0, {IRQ_PDMA0}, &s5pc100_pdma0_pdata);
-
-static u8 pdma1_peri[] = {
- DMACH_UART0_RX,
- DMACH_UART0_TX,
- DMACH_UART1_RX,
- DMACH_UART1_TX,
- DMACH_UART2_RX,
- DMACH_UART2_TX,
- DMACH_UART3_RX,
- DMACH_UART3_TX,
- DMACH_IRDA,
- DMACH_I2S0_RX,
- DMACH_I2S0_TX,
- DMACH_I2S0S_TX,
- DMACH_I2S1_RX,
- DMACH_I2S1_TX,
- DMACH_I2S2_RX,
- DMACH_I2S2_TX,
- DMACH_SPI0_RX,
- DMACH_SPI0_TX,
- DMACH_SPI1_RX,
- DMACH_SPI1_TX,
- DMACH_SPI2_RX,
- DMACH_SPI2_TX,
- DMACH_PCM0_RX,
- DMACH_PCM0_TX,
- DMACH_PCM1_RX,
- DMACH_PCM1_TX,
- DMACH_MSM_REQ0,
- DMACH_MSM_REQ1,
- DMACH_MSM_REQ2,
- DMACH_MSM_REQ3,
-};
-
-static struct dma_pl330_platdata s5pc100_pdma1_pdata = {
- .nr_valid_peri = ARRAY_SIZE(pdma1_peri),
- .peri_id = pdma1_peri,
-};
-
-static AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330,
- S5PC100_PA_PDMA1, {IRQ_PDMA1}, &s5pc100_pdma1_pdata);
-
-static int __init s5pc100_dma_init(void)
-{
- dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask);
- dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask);
- amba_device_register(&s5pc100_pdma0_device, &iomem_resource);
-
- dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask);
- dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask);
- amba_device_register(&s5pc100_pdma1_device, &iomem_resource);
-
- return 0;
-}
-arch_initcall(s5pc100_dma_init);
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
deleted file mode 100644
index 22c23859e45e..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/debug-macro.S
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- *
- * Based on mach-s3c6400/include/mach/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <linux/serial_s3c.h>
-#include <mach/map.h>
-
- /* note, for the boot process to work we have to keep the UART
- * virtual address aligned to an 1MiB boundary for the L1
- * mapping the head code makes. We keep the UART virtual address
- * aligned and add in the offset when we load the value here.
- */
-
- .macro addruart, rp, rv, tmp
- ldr \rp, = S3C_PA_UART
- ldr \rv, = S3C_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
- add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
- add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
-#endif
- .endm
-
-/* include the reset of the code which will do the work, we're only
- * compiling for a single cpu processor type so the default of s3c2440
- * will be fine with us.
- */
-
-#include <debug/samsung.S>
diff --git a/arch/arm/mach-s5pc100/include/mach/dma.h b/arch/arm/mach-s5pc100/include/mach/dma.h
deleted file mode 100644
index 201842a3769e..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/dma.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MACH_DMA_H
-#define __MACH_DMA_H
-
-/* This platform uses the common DMA API driver for PL330 */
-#include <plat/dma-pl330.h>
-
-#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
deleted file mode 100644
index bad0700457db..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/entry-macro.S
+++ /dev/null
@@ -1,19 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/entry-macro.S
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * Based on mach-s3c6400/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for the Samsung S5PC1XX series
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- .endm
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
deleted file mode 100644
index 5e1a924b595f..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/gpio.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/gpio.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - GPIO lib support
- *
- * Base on mach-s3c6400/include/mach/gpio.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H __FILE__
-
-/* GPIO bank sizes */
-#define S5PC100_GPIO_A0_NR (8)
-#define S5PC100_GPIO_A1_NR (5)
-#define S5PC100_GPIO_B_NR (8)
-#define S5PC100_GPIO_C_NR (5)
-#define S5PC100_GPIO_D_NR (7)
-#define S5PC100_GPIO_E0_NR (8)
-#define S5PC100_GPIO_E1_NR (6)
-#define S5PC100_GPIO_F0_NR (8)
-#define S5PC100_GPIO_F1_NR (8)
-#define S5PC100_GPIO_F2_NR (8)
-#define S5PC100_GPIO_F3_NR (4)
-#define S5PC100_GPIO_G0_NR (8)
-#define S5PC100_GPIO_G1_NR (3)
-#define S5PC100_GPIO_G2_NR (7)
-#define S5PC100_GPIO_G3_NR (7)
-#define S5PC100_GPIO_H0_NR (8)
-#define S5PC100_GPIO_H1_NR (8)
-#define S5PC100_GPIO_H2_NR (8)
-#define S5PC100_GPIO_H3_NR (8)
-#define S5PC100_GPIO_I_NR (8)
-#define S5PC100_GPIO_J0_NR (8)
-#define S5PC100_GPIO_J1_NR (5)
-#define S5PC100_GPIO_J2_NR (8)
-#define S5PC100_GPIO_J3_NR (8)
-#define S5PC100_GPIO_J4_NR (4)
-#define S5PC100_GPIO_K0_NR (8)
-#define S5PC100_GPIO_K1_NR (6)
-#define S5PC100_GPIO_K2_NR (8)
-#define S5PC100_GPIO_K3_NR (8)
-#define S5PC100_GPIO_L0_NR (8)
-#define S5PC100_GPIO_L1_NR (8)
-#define S5PC100_GPIO_L2_NR (8)
-#define S5PC100_GPIO_L3_NR (8)
-#define S5PC100_GPIO_L4_NR (8)
-
-/* GPIO bank numbes */
-
-/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
- * space for debugging purposes so that any accidental
- * change from one gpio bank to another can be caught.
-*/
-
-#define S5PC100_GPIO_NEXT(__gpio) \
- ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-
-enum s5p_gpio_number {
- S5PC100_GPIO_A0_START = 0,
- S5PC100_GPIO_A1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_A0),
- S5PC100_GPIO_B_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_A1),
- S5PC100_GPIO_C_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_B),
- S5PC100_GPIO_D_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_C),
- S5PC100_GPIO_E0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_D),
- S5PC100_GPIO_E1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_E0),
- S5PC100_GPIO_F0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_E1),
- S5PC100_GPIO_F1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_F0),
- S5PC100_GPIO_F2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_F1),
- S5PC100_GPIO_F3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_F2),
- S5PC100_GPIO_G0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_F3),
- S5PC100_GPIO_G1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_G0),
- S5PC100_GPIO_G2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_G1),
- S5PC100_GPIO_G3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_G2),
- S5PC100_GPIO_H0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_G3),
- S5PC100_GPIO_H1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_H0),
- S5PC100_GPIO_H2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_H1),
- S5PC100_GPIO_H3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_H2),
- S5PC100_GPIO_I_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_H3),
- S5PC100_GPIO_J0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_I),
- S5PC100_GPIO_J1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J0),
- S5PC100_GPIO_J2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J1),
- S5PC100_GPIO_J3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J2),
- S5PC100_GPIO_J4_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J3),
- S5PC100_GPIO_K0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J4),
- S5PC100_GPIO_K1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_K0),
- S5PC100_GPIO_K2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_K1),
- S5PC100_GPIO_K3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_K2),
- S5PC100_GPIO_L0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_K3),
- S5PC100_GPIO_L1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_L0),
- S5PC100_GPIO_L2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_L1),
- S5PC100_GPIO_L3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_L2),
- S5PC100_GPIO_L4_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_L3),
- S5PC100_GPIO_END = S5PC100_GPIO_NEXT(S5PC100_GPIO_L4),
-};
-
-/* S5PC100 GPIO number definitions. */
-#define S5PC100_GPA0(_nr) (S5PC100_GPIO_A0_START + (_nr))
-#define S5PC100_GPA1(_nr) (S5PC100_GPIO_A1_START + (_nr))
-#define S5PC100_GPB(_nr) (S5PC100_GPIO_B_START + (_nr))
-#define S5PC100_GPC(_nr) (S5PC100_GPIO_C_START + (_nr))
-#define S5PC100_GPD(_nr) (S5PC100_GPIO_D_START + (_nr))
-#define S5PC100_GPE0(_nr) (S5PC100_GPIO_E0_START + (_nr))
-#define S5PC100_GPE1(_nr) (S5PC100_GPIO_E1_START + (_nr))
-#define S5PC100_GPF0(_nr) (S5PC100_GPIO_F0_START + (_nr))
-#define S5PC100_GPF1(_nr) (S5PC100_GPIO_F1_START + (_nr))
-#define S5PC100_GPF2(_nr) (S5PC100_GPIO_F2_START + (_nr))
-#define S5PC100_GPF3(_nr) (S5PC100_GPIO_F3_START + (_nr))
-#define S5PC100_GPG0(_nr) (S5PC100_GPIO_G0_START + (_nr))
-#define S5PC100_GPG1(_nr) (S5PC100_GPIO_G1_START + (_nr))
-#define S5PC100_GPG2(_nr) (S5PC100_GPIO_G2_START + (_nr))
-#define S5PC100_GPG3(_nr) (S5PC100_GPIO_G3_START + (_nr))
-#define S5PC100_GPH0(_nr) (S5PC100_GPIO_H0_START + (_nr))
-#define S5PC100_GPH1(_nr) (S5PC100_GPIO_H1_START + (_nr))
-#define S5PC100_GPH2(_nr) (S5PC100_GPIO_H2_START + (_nr))
-#define S5PC100_GPH3(_nr) (S5PC100_GPIO_H3_START + (_nr))
-#define S5PC100_GPI(_nr) (S5PC100_GPIO_I_START + (_nr))
-#define S5PC100_GPJ0(_nr) (S5PC100_GPIO_J0_START + (_nr))
-#define S5PC100_GPJ1(_nr) (S5PC100_GPIO_J1_START + (_nr))
-#define S5PC100_GPJ2(_nr) (S5PC100_GPIO_J2_START + (_nr))
-#define S5PC100_GPJ3(_nr) (S5PC100_GPIO_J3_START + (_nr))
-#define S5PC100_GPJ4(_nr) (S5PC100_GPIO_J4_START + (_nr))
-#define S5PC100_GPK0(_nr) (S5PC100_GPIO_K0_START + (_nr))
-#define S5PC100_GPK1(_nr) (S5PC100_GPIO_K1_START + (_nr))
-#define S5PC100_GPK2(_nr) (S5PC100_GPIO_K2_START + (_nr))
-#define S5PC100_GPK3(_nr) (S5PC100_GPIO_K3_START + (_nr))
-#define S5PC100_GPL0(_nr) (S5PC100_GPIO_L0_START + (_nr))
-#define S5PC100_GPL1(_nr) (S5PC100_GPIO_L1_START + (_nr))
-#define S5PC100_GPL2(_nr) (S5PC100_GPIO_L2_START + (_nr))
-#define S5PC100_GPL3(_nr) (S5PC100_GPIO_L3_START + (_nr))
-#define S5PC100_GPL4(_nr) (S5PC100_GPIO_L4_START + (_nr))
-
-/* It used the end of the S5PC100 gpios */
-#define S3C_GPIO_END S5PC100_GPIO_END
-
-/* define the number of gpios we need to the one after the MP04() range */
-#define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1)
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/hardware.h b/arch/arm/mach-s5pc100/include/mach/hardware.h
deleted file mode 100644
index 6b38618c2fd9..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/hardware.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/hardware.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - Hardware support
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H __FILE__
-
-/* currently nothing here, placeholder */
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
deleted file mode 100644
index d2eb4757381f..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/irqs.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - IRQ definitions
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#include <plat/irqs.h>
-
-/* VIC0: system, DMA, timer */
-#define IRQ_EINT16_31 S5P_IRQ_VIC0(16)
-#define IRQ_BATF S5P_IRQ_VIC0(17)
-#define IRQ_MDMA S5P_IRQ_VIC0(18)
-#define IRQ_PDMA0 S5P_IRQ_VIC0(19)
-#define IRQ_PDMA1 S5P_IRQ_VIC0(20)
-#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21)
-#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22)
-#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23)
-#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24)
-#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25)
-#define IRQ_SYSTIMER S5P_IRQ_VIC0(26)
-#define IRQ_WDT S5P_IRQ_VIC0(27)
-#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28)
-#define IRQ_RTC_TIC S5P_IRQ_VIC0(29)
-#define IRQ_GPIOINT S5P_IRQ_VIC0(30)
-
-/* VIC1: ARM, power, memory, connectivity */
-#define IRQ_PMU S5P_IRQ_VIC1(0)
-#define IRQ_CORTEX1 S5P_IRQ_VIC1(1)
-#define IRQ_CORTEX2 S5P_IRQ_VIC1(2)
-#define IRQ_CORTEX3 S5P_IRQ_VIC1(3)
-#define IRQ_CORTEX4 S5P_IRQ_VIC1(4)
-#define IRQ_IEMAPC S5P_IRQ_VIC1(5)
-#define IRQ_IEMIEC S5P_IRQ_VIC1(6)
-#define IRQ_ONENAND S5P_IRQ_VIC1(7)
-#define IRQ_NFC S5P_IRQ_VIC1(8)
-#define IRQ_CFCON S5P_IRQ_VIC1(9)
-#define IRQ_UART0 S5P_IRQ_VIC1(10)
-#define IRQ_UART1 S5P_IRQ_VIC1(11)
-#define IRQ_UART2 S5P_IRQ_VIC1(12)
-#define IRQ_UART3 S5P_IRQ_VIC1(13)
-#define IRQ_IIC S5P_IRQ_VIC1(14)
-#define IRQ_SPI0 S5P_IRQ_VIC1(15)
-#define IRQ_SPI1 S5P_IRQ_VIC1(16)
-#define IRQ_SPI2 S5P_IRQ_VIC1(17)
-#define IRQ_IRDA S5P_IRQ_VIC1(18)
-#define IRQ_IIC2 S5P_IRQ_VIC1(19)
-#define IRQ_IIC3 S5P_IRQ_VIC1(20)
-#define IRQ_HSIRX S5P_IRQ_VIC1(21)
-#define IRQ_HSITX S5P_IRQ_VIC1(22)
-#define IRQ_UHOST S5P_IRQ_VIC1(23)
-#define IRQ_OTG S5P_IRQ_VIC1(24)
-#define IRQ_MSM S5P_IRQ_VIC1(25)
-#define IRQ_HSMMC0 S5P_IRQ_VIC1(26)
-#define IRQ_HSMMC1 S5P_IRQ_VIC1(27)
-#define IRQ_HSMMC2 S5P_IRQ_VIC1(28)
-#define IRQ_MIPICSI S5P_IRQ_VIC1(29)
-#define IRQ_MIPIDSI S5P_IRQ_VIC1(30)
-
-/* VIC2: multimedia, audio, security */
-#define IRQ_LCD0 S5P_IRQ_VIC2(0)
-#define IRQ_LCD1 S5P_IRQ_VIC2(1)
-#define IRQ_LCD2 S5P_IRQ_VIC2(2)
-#define IRQ_LCD3 S5P_IRQ_VIC2(3)
-#define IRQ_ROTATOR S5P_IRQ_VIC2(4)
-#define IRQ_FIMC0 S5P_IRQ_VIC2(5)
-#define IRQ_FIMC1 S5P_IRQ_VIC2(6)
-#define IRQ_FIMC2 S5P_IRQ_VIC2(7)
-#define IRQ_JPEG S5P_IRQ_VIC2(8)
-#define IRQ_2D S5P_IRQ_VIC2(9)
-#define IRQ_3D S5P_IRQ_VIC2(10)
-#define IRQ_MIXER S5P_IRQ_VIC2(11)
-#define IRQ_HDMI S5P_IRQ_VIC2(12)
-#define IRQ_IIC1 S5P_IRQ_VIC2(13)
-#define IRQ_MFC S5P_IRQ_VIC2(14)
-#define IRQ_TVENC S5P_IRQ_VIC2(15)
-#define IRQ_I2S0 S5P_IRQ_VIC2(16)
-#define IRQ_I2S1 S5P_IRQ_VIC2(17)
-#define IRQ_I2S2 S5P_IRQ_VIC2(18)
-#define IRQ_AC97 S5P_IRQ_VIC2(19)
-#define IRQ_PCM0 S5P_IRQ_VIC2(20)
-#define IRQ_PCM1 S5P_IRQ_VIC2(21)
-#define IRQ_SPDIF S5P_IRQ_VIC2(22)
-#define IRQ_ADC S5P_IRQ_VIC2(23)
-#define IRQ_PENDN S5P_IRQ_VIC2(24)
-#define IRQ_TC IRQ_PENDN
-#define IRQ_KEYPAD S5P_IRQ_VIC2(25)
-#define IRQ_CG S5P_IRQ_VIC2(26)
-#define IRQ_SEC S5P_IRQ_VIC2(27)
-#define IRQ_SECRX S5P_IRQ_VIC2(28)
-#define IRQ_SECTX S5P_IRQ_VIC2(29)
-#define IRQ_SDMIRQ S5P_IRQ_VIC2(30)
-#define IRQ_SDMFIQ S5P_IRQ_VIC2(31)
-#define IRQ_VIC_END S5P_IRQ_VIC2(31)
-
-#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0))
-#define S5P_EINT_BASE2 (IRQ_VIC_END + 1)
-
-/* GPIO interrupt */
-#define S5P_GPIOINT_BASE (IRQ_EINT(31) + 1)
-#define S5P_GPIOINT_GROUP_MAXNR 21
-
-/* Set the default NR_IRQS */
-#define NR_IRQS (IRQ_EINT(31) + S5P_GPIOINT_COUNT + 1)
-
-/* Compatibility */
-#define IRQ_LCD_FIFO IRQ_LCD0
-#define IRQ_LCD_VSYNC IRQ_LCD1
-#define IRQ_LCD_SYSTEM IRQ_LCD2
-
-#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
deleted file mode 100644
index 2550b6112b82..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/map.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H __FILE__
-
-#include <plat/map-base.h>
-#include <plat/map-s5p.h>
-
-#define S5PC100_PA_SDRAM 0x20000000
-
-#define S5PC100_PA_ONENAND 0xE7100000
-#define S5PC100_PA_ONENAND_BUF 0xB0000000
-
-#define S5PC100_PA_CHIPID 0xE0000000
-
-#define S5PC100_PA_SYSCON 0xE0100000
-
-#define S5PC100_PA_OTHERS 0xE0200000
-
-#define S5PC100_PA_GPIO 0xE0300000
-
-#define S5PC100_PA_VIC0 0xE4000000
-#define S5PC100_PA_VIC1 0xE4100000
-#define S5PC100_PA_VIC2 0xE4200000
-
-#define S5PC100_PA_SROMC 0xE7000000
-
-#define S5PC100_PA_CFCON 0xE7800000
-
-#define S5PC100_PA_MDMA 0xE8100000
-#define S5PC100_PA_PDMA0 0xE9000000
-#define S5PC100_PA_PDMA1 0xE9200000
-
-#define S5PC100_PA_TIMER 0xEA000000
-#define S5PC100_PA_SYSTIMER 0xEA100000
-#define S5PC100_PA_WATCHDOG 0xEA200000
-#define S5PC100_PA_RTC 0xEA300000
-
-#define S5PC100_PA_UART 0xEC000000
-
-#define S5PC100_PA_IIC0 0xEC100000
-#define S5PC100_PA_IIC1 0xEC200000
-
-#define S5PC100_PA_SPI0 0xEC300000
-#define S5PC100_PA_SPI1 0xEC400000
-#define S5PC100_PA_SPI2 0xEC500000
-
-#define S5PC100_PA_USB_HSOTG 0xED200000
-#define S5PC100_PA_USB_HSPHY 0xED300000
-
-#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
-
-#define S5PC100_PA_FB 0xEE000000
-
-#define S5PC100_PA_FIMC0 0xEE200000
-#define S5PC100_PA_FIMC1 0xEE300000
-#define S5PC100_PA_FIMC2 0xEE400000
-
-#define S5PC100_PA_I2S0 0xF2000000
-#define S5PC100_PA_I2S1 0xF2100000
-#define S5PC100_PA_I2S2 0xF2200000
-
-#define S5PC100_PA_AC97 0xF2300000
-
-#define S5PC100_PA_PCM0 0xF2400000
-#define S5PC100_PA_PCM1 0xF2500000
-
-#define S5PC100_PA_SPDIF 0xF2600000
-
-#define S5PC100_PA_TSADC 0xF3000000
-
-#define S5PC100_PA_KEYPAD 0xF3100000
-
-/* Compatibiltiy Defines */
-
-#define S3C_PA_FB S5PC100_PA_FB
-#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC(0)
-#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1)
-#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2)
-#define S3C_PA_IIC S5PC100_PA_IIC0
-#define S3C_PA_IIC1 S5PC100_PA_IIC1
-#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD
-#define S3C_PA_ONENAND S5PC100_PA_ONENAND
-#define S3C_PA_ONENAND_BUF S5PC100_PA_ONENAND_BUF
-#define S3C_PA_RTC S5PC100_PA_RTC
-#define S3C_PA_TSADC S5PC100_PA_TSADC
-#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG
-#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY
-#define S3C_PA_WDT S5PC100_PA_WATCHDOG
-#define S3C_PA_SPI0 S5PC100_PA_SPI0
-#define S3C_PA_SPI1 S5PC100_PA_SPI1
-#define S3C_PA_SPI2 S5PC100_PA_SPI2
-
-#define S5P_PA_CHIPID S5PC100_PA_CHIPID
-#define S5P_PA_FIMC0 S5PC100_PA_FIMC0
-#define S5P_PA_FIMC1 S5PC100_PA_FIMC1
-#define S5P_PA_FIMC2 S5PC100_PA_FIMC2
-#define S5P_PA_SDRAM S5PC100_PA_SDRAM
-#define S5P_PA_SROMC S5PC100_PA_SROMC
-#define S5P_PA_SYSCON S5PC100_PA_SYSCON
-#define S5P_PA_TIMER S5PC100_PA_TIMER
-
-#define SAMSUNG_PA_ADC S5PC100_PA_TSADC
-#define SAMSUNG_PA_CFCON S5PC100_PA_CFCON
-#define SAMSUNG_PA_KEYPAD S5PC100_PA_KEYPAD
-#define SAMSUNG_PA_TIMER S5PC100_PA_TIMER
-
-#define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000)
-
-#define S3C_SZ_ONENAND_BUF (SZ_256M - SZ_32M)
-
-/* UART */
-
-#define S3C_PA_UART S5PC100_PA_UART
-
-#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART0 S5P_PA_UART(0)
-#define S5P_PA_UART1 S5P_PA_UART(1)
-#define S5P_PA_UART2 S5P_PA_UART(2)
-#define S5P_PA_UART3 S5P_PA_UART(3)
-
-#define S5P_SZ_UART SZ_256
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-clock.h b/arch/arm/mach-s5pc100/include/mach/regs-clock.h
deleted file mode 100644
index bc92da2e0ba2..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/regs-clock.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/regs-clock.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5PC100 - Clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_CLOCK_H
-#define __ASM_ARCH_REGS_CLOCK_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
-
-#define S5PC100_REG_OTHERS(x) (S5PC100_VA_OTHERS + (x))
-
-#define S5P_APLL_LOCK S5P_CLKREG(0x00)
-#define S5P_MPLL_LOCK S5P_CLKREG(0x04)
-#define S5P_EPLL_LOCK S5P_CLKREG(0x08)
-#define S5P_HPLL_LOCK S5P_CLKREG(0x0C)
-
-#define S5P_APLL_CON S5P_CLKREG(0x100)
-#define S5P_MPLL_CON S5P_CLKREG(0x104)
-#define S5P_EPLL_CON S5P_CLKREG(0x108)
-#define S5P_HPLL_CON S5P_CLKREG(0x10C)
-
-#define S5P_CLK_SRC0 S5P_CLKREG(0x200)
-#define S5P_CLK_SRC1 S5P_CLKREG(0x204)
-#define S5P_CLK_SRC2 S5P_CLKREG(0x208)
-#define S5P_CLK_SRC3 S5P_CLKREG(0x20C)
-
-#define S5P_CLK_DIV0 S5P_CLKREG(0x300)
-#define S5P_CLK_DIV1 S5P_CLKREG(0x304)
-#define S5P_CLK_DIV2 S5P_CLKREG(0x308)
-#define S5P_CLK_DIV3 S5P_CLKREG(0x30C)
-#define S5P_CLK_DIV4 S5P_CLKREG(0x310)
-
-#define S5P_CLK_OUT S5P_CLKREG(0x400)
-
-#define S5P_CLKGATE_D00 S5P_CLKREG(0x500)
-#define S5P_CLKGATE_D01 S5P_CLKREG(0x504)
-#define S5P_CLKGATE_D02 S5P_CLKREG(0x508)
-
-#define S5P_CLKGATE_D10 S5P_CLKREG(0x520)
-#define S5P_CLKGATE_D11 S5P_CLKREG(0x524)
-#define S5P_CLKGATE_D12 S5P_CLKREG(0x528)
-#define S5P_CLKGATE_D13 S5P_CLKREG(0x52C)
-#define S5P_CLKGATE_D14 S5P_CLKREG(0x530)
-#define S5P_CLKGATE_D15 S5P_CLKREG(0x534)
-
-#define S5P_CLKGATE_D20 S5P_CLKREG(0x540)
-
-#define S5P_CLKGATE_SCLK0 S5P_CLKREG(0x560)
-#define S5P_CLKGATE_SCLK1 S5P_CLKREG(0x564)
-
-/* CLKDIV0 */
-#define S5P_CLKDIV0_D0_MASK (0x7<<8)
-#define S5P_CLKDIV0_D0_SHIFT (8)
-#define S5P_CLKDIV0_PCLKD0_MASK (0x7<<12)
-#define S5P_CLKDIV0_PCLKD0_SHIFT (12)
-
-/* CLKDIV1 */
-#define S5P_CLKDIV1_D1_MASK (0x7<<12)
-#define S5P_CLKDIV1_D1_SHIFT (12)
-#define S5P_CLKDIV1_PCLKD1_MASK (0x7<<16)
-#define S5P_CLKDIV1_PCLKD1_SHIFT (16)
-
-#define S5PC100_SWRESET S5PC100_REG_OTHERS(0x000)
-#define S5PC100_MEM_SYS_CFG S5PC100_REG_OTHERS(0x200)
-
-#define S5PC100_SWRESET_RESETVAL 0xc100
-
-#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON 0x30
-
-#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
deleted file mode 100644
index 0bf73209ec7b..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* linux/arch/arm/plat-s5pc100/include/plat/regs-gpio.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - GPIO register definitions
- */
-
-#ifndef __ASM_MACH_S5PC100_REGS_GPIO_H
-#define __ASM_MACH_S5PC100_REGS_GPIO_H __FILE__
-
-#include <mach/map.h>
-
-#define S5PC100EINT30CON (S5P_VA_GPIO + 0xE00)
-#define S5P_EINT_CON(x) (S5PC100EINT30CON + ((x) * 0x4))
-
-#define S5PC100EINT30FLTCON0 (S5P_VA_GPIO + 0xE80)
-#define S5P_EINT_FLTCON(x) (S5PC100EINT30FLTCON0 + ((x) * 0x4))
-
-#define S5PC100EINT30MASK (S5P_VA_GPIO + 0xF00)
-#define S5P_EINT_MASK(x) (S5PC100EINT30MASK + ((x) * 0x4))
-
-#define S5PC100EINT30PEND (S5P_VA_GPIO + 0xF40)
-#define S5P_EINT_PEND(x) (S5PC100EINT30PEND + ((x) * 0x4))
-
-#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3)
-
-#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7))
-
-#define EINT_MODE S3C_GPIO_SFN(0x2)
-
-#define EINT_GPIO_0(x) S5PC100_GPH0(x)
-#define EINT_GPIO_1(x) S5PC100_GPH1(x)
-#define EINT_GPIO_2(x) S5PC100_GPH2(x)
-#define EINT_GPIO_3(x) S5PC100_GPH3(x)
-
-#endif /* __ASM_MACH_S5PC100_REGS_GPIO_H */
-
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
deleted file mode 100644
index 761627897f30..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/regs-irq.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/regs-irq.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - IRQ register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_IRQ_H
-#define __ASM_ARCH_REGS_IRQ_H __FILE__
-
-#include <mach/map.h>
-
-#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
deleted file mode 100644
index 668af3ac31f3..000000000000
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ /dev/null
@@ -1,264 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/mach-smdkc100.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Author: Byungho Min <bhmin@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/gpio-cfg.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/fb.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/ata-samsung_cf.h>
-#include <plat/adc.h>
-#include <plat/keypad.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <linux/platform_data/asoc-s3c.h>
-#include <plat/backlight.h>
-#include <plat/samsung-time.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDKC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDKC100_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define SMDKC100_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S3C2440_UFCON_RXTRIG8 | \
- S3C2440_UFCON_TXTRIG16)
-
-static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = SMDKC100_UCON_DEFAULT,
- .ulcon = SMDKC100_ULCON_DEFAULT,
- .ufcon = SMDKC100_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = SMDKC100_UCON_DEFAULT,
- .ulcon = SMDKC100_ULCON_DEFAULT,
- .ufcon = SMDKC100_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = SMDKC100_UCON_DEFAULT,
- .ulcon = SMDKC100_ULCON_DEFAULT,
- .ufcon = SMDKC100_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = SMDKC100_UCON_DEFAULT,
- .ulcon = SMDKC100_ULCON_DEFAULT,
- .ufcon = SMDKC100_UFCON_DEFAULT,
- },
-};
-
-/* I2C0 */
-static struct i2c_board_info i2c_devs0[] __initdata = {
- {I2C_BOARD_INFO("wm8580", 0x1b),},
-};
-
-/* I2C1 */
-static struct i2c_board_info i2c_devs1[] __initdata = {
-};
-
-/* LCD power controller */
-static void smdkc100_lcd_power_set(struct plat_lcd_data *pd,
- unsigned int power)
-{
- if (power) {
- /* module reset */
- gpio_direction_output(S5PC100_GPH0(6), 1);
- mdelay(100);
- gpio_direction_output(S5PC100_GPH0(6), 0);
- mdelay(10);
- gpio_direction_output(S5PC100_GPH0(6), 1);
- mdelay(10);
- }
-}
-
-static struct plat_lcd_data smdkc100_lcd_power_data = {
- .set_power = smdkc100_lcd_power_set,
-};
-
-static struct platform_device smdkc100_lcd_powerdev = {
- .name = "platform-lcd",
- .dev.parent = &s3c_device_fb.dev,
- .dev.platform_data = &smdkc100_lcd_power_data,
-};
-
-/* Frame Buffer */
-static struct s3c_fb_pd_win smdkc100_fb_win0 = {
- .max_bpp = 32,
- .default_bpp = 16,
- .xres = 800,
- .yres = 480,
-};
-
-static struct fb_videomode smdkc100_lcd_timing = {
- .left_margin = 8,
- .right_margin = 13,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
- .refresh = 80,
-};
-
-static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = {
- .win[0] = &smdkc100_fb_win0,
- .vtiming = &smdkc100_lcd_timing,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .setup_gpio = s5pc100_fb_gpio_setup_24bpp,
-};
-
-static struct s3c_ide_platdata smdkc100_ide_pdata __initdata = {
- .setup_gpio = s5pc100_ide_setup_gpio,
-};
-
-static uint32_t smdkc100_keymap[] __initdata = {
- /* KEY(row, col, keycode) */
- KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
- KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
- KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
- KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
-};
-
-static struct matrix_keymap_data smdkc100_keymap_data __initdata = {
- .keymap = smdkc100_keymap,
- .keymap_size = ARRAY_SIZE(smdkc100_keymap),
-};
-
-static struct samsung_keypad_platdata smdkc100_keypad_data __initdata = {
- .keymap_data = &smdkc100_keymap_data,
- .rows = 2,
- .cols = 8,
-};
-
-static struct platform_device *smdkc100_devices[] __initdata = {
- &s3c_device_adc,
- &s3c_device_cfcon,
- &s3c_device_i2c0,
- &s3c_device_i2c1,
- &s3c_device_fb,
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc1,
- &s3c_device_hsmmc2,
- &samsung_device_pwm,
- &s3c_device_ts,
- &s3c_device_wdt,
- &smdkc100_lcd_powerdev,
- &s5pc100_device_iis0,
- &samsung_device_keypad,
- &s5pc100_device_ac97,
- &s3c_device_rtc,
- &s5p_device_fimc0,
- &s5p_device_fimc1,
- &s5p_device_fimc2,
- &s5pc100_device_spdif,
-};
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdkc100_bl_gpio_info = {
- .no = S5PC100_GPD(0),
- .func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdkc100_bl_data = {
- .pwm_id = 0,
- .enable_gpio = -1,
-};
-
-static void __init smdkc100_map_io(void)
-{
- s5pc100_init_io(NULL, 0);
- s3c24xx_init_clocks(12000000);
- s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
-}
-
-static void __init smdkc100_machine_init(void)
-{
- s3c24xx_ts_set_platdata(NULL);
-
- /* I2C */
- s3c_i2c0_set_platdata(NULL);
- s3c_i2c1_set_platdata(NULL);
- i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
- i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
- s3c_fb_set_platdata(&smdkc100_lcd_pdata);
- s3c_ide_set_platdata(&smdkc100_ide_pdata);
-
- samsung_keypad_set_platdata(&smdkc100_keypad_data);
-
- s5pc100_spdif_setup_gpio(S5PC100_SPDIF_GPD);
-
- /* LCD init */
- gpio_request(S5PC100_GPH0(6), "GPH0");
- smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0);
-
- platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
-
- samsung_bl_set(&smdkc100_bl_gpio_info, &smdkc100_bl_data);
-}
-
-MACHINE_START(SMDKC100, "SMDKC100")
- /* Maintainer: Byungho Min <bhmin@samsung.com> */
- .atag_offset = 0x100,
- .init_irq = s5pc100_init_irq,
- .map_io = smdkc100_map_io,
- .init_machine = smdkc100_machine_init,
- .init_time = samsung_timer_init,
- .restart = s5pc100_restart,
-MACHINE_END
diff --git a/arch/arm/mach-s5pc100/setup-fb-24bpp.c b/arch/arm/mach-s5pc100/setup-fb-24bpp.c
deleted file mode 100644
index 8978e4cf9ed5..000000000000
--- a/arch/arm/mach-s5pc100/setup-fb-24bpp.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/arch/arm/mach-s5pc100/setup-fb-24bpp.c
- *
- * Copyright 2009 Samsung Electronics
- *
- * Base S5PC100 setup information for 24bpp LCD framebuffer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-
-#define DISR_OFFSET 0x7008
-
-static void s5pc100_fb_setgpios(unsigned int base, unsigned int nr)
-{
- s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(2));
-}
-
-void s5pc100_fb_gpio_setup_24bpp(void)
-{
- s5pc100_fb_setgpios(S5PC100_GPF0(0), 8);
- s5pc100_fb_setgpios(S5PC100_GPF1(0), 8);
- s5pc100_fb_setgpios(S5PC100_GPF2(0), 8);
- s5pc100_fb_setgpios(S5PC100_GPF3(0), 4);
-}
diff --git a/arch/arm/mach-s5pc100/setup-i2c0.c b/arch/arm/mach-s5pc100/setup-i2c0.c
deleted file mode 100644
index 89a6a769d622..000000000000
--- a/arch/arm/mach-s5pc100/setup-i2c0.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-i2c0.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * Base S5PC100 I2C bus 0 gpio configuration
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(S5PC100_GPD(3), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
diff --git a/arch/arm/mach-s5pc100/setup-i2c1.c b/arch/arm/mach-s5pc100/setup-i2c1.c
deleted file mode 100644
index faa667ef02cb..000000000000
--- a/arch/arm/mach-s5pc100/setup-i2c1.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-i2c1.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * Base S5PC100 I2C bus 1 gpio configuration
- *
- * Based on plat-s3c64xx/setup-i2c1.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c1_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(S5PC100_GPD(5), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
diff --git a/arch/arm/mach-s5pc100/setup-ide.c b/arch/arm/mach-s5pc100/setup-ide.c
deleted file mode 100644
index 223aae044466..000000000000
--- a/arch/arm/mach-s5pc100/setup-ide.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-ide.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5PC100 setup information for IDE
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <mach/regs-clock.h>
-#include <plat/gpio-cfg.h>
-
-static void s5pc100_ide_cfg_gpios(unsigned int base, unsigned int nr)
-{
- s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(4));
-
- for (; nr > 0; nr--, base++)
- s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4);
-}
-
-void s5pc100_ide_setup_gpio(void)
-{
- u32 reg;
-
- /* Independent CF interface, CF chip select configuration */
- reg = readl(S5PC100_MEM_SYS_CFG) & (~0x3f);
- writel(reg | MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S5PC100_MEM_SYS_CFG);
-
- /* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */
- s5pc100_ide_cfg_gpios(S5PC100_GPJ0(0), 8);
-
- /*CF_Data[0 - 7] */
- s5pc100_ide_cfg_gpios(S5PC100_GPJ2(0), 8);
-
- /* CF_Data[8 - 15] */
- s5pc100_ide_cfg_gpios(S5PC100_GPJ3(0), 8);
-
- /* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */
- s5pc100_ide_cfg_gpios(S5PC100_GPJ4(0), 4);
-
- /* EBI_OE, EBI_WE */
- s3c_gpio_cfgpin_range(S5PC100_GPK0(6), 2, S3C_GPIO_SFN(0));
-
- /* CF_OE, CF_WE */
- s3c_gpio_cfgrange_nopull(S5PC100_GPK1(6), 8, S3C_GPIO_SFN(2));
-
- /* CF_CD */
- s3c_gpio_cfgpin(S5PC100_GPK3(5), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PC100_GPK3(5), S3C_GPIO_PULL_NONE);
-}
diff --git a/arch/arm/mach-s5pc100/setup-keypad.c b/arch/arm/mach-s5pc100/setup-keypad.c
deleted file mode 100644
index ada377f0c206..000000000000
--- a/arch/arm/mach-s5pc100/setup-keypad.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-keypad.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * GPIO configuration for S5PC100 KeyPad device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-
-void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
-{
- /* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */
- s3c_gpio_cfgrange_nopull(S5PC100_GPH3(0), rows, S3C_GPIO_SFN(3));
-
- /* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */
- s3c_gpio_cfgrange_nopull(S5PC100_GPH2(0), cols, S3C_GPIO_SFN(3));
-}
diff --git a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
deleted file mode 100644
index 6010c0310cb5..000000000000
--- a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/plat-s5pc100/setup-sdhci-gpio.c
- *
- * Copyright 2009 Samsung Eletronics
- *
- * S5PC100 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/card.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/sdhci.h>
-
-void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int num;
-
- num = width;
- /* In case of 8 width, we should decrease the 2 */
- if (width == 8)
- num = width - 2;
-
- /* Set all the necessary GPG0/GPG1 pins to special-function 0 */
- s3c_gpio_cfgrange_nopull(S5PC100_GPG0(0), 2 + num, S3C_GPIO_SFN(2));
-
- if (width == 8)
- s3c_gpio_cfgrange_nopull(S5PC100_GPG1(0), 2, S3C_GPIO_SFN(2));
-
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
- }
-}
-
-void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
- /* Set all the necessary GPG2 pins to special-function 2 */
- s3c_gpio_cfgrange_nopull(S5PC100_GPG2(0), 2 + width, S3C_GPIO_SFN(2));
-
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
- }
-}
-
-void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
- /* Set all the necessary GPG3 pins to special-function 2 */
- s3c_gpio_cfgrange_nopull(S5PC100_GPG3(0), 2 + width, S3C_GPIO_SFN(2));
-
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
- }
-}
diff --git a/arch/arm/mach-s5pc100/setup-spi.c b/arch/arm/mach-s5pc100/setup-spi.c
deleted file mode 100644
index 183567961de1..000000000000
--- a/arch/arm/mach-s5pc100/setup-spi.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-spi.c
- *
- * Copyright (C) 2011 Samsung Electronics Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-
-#ifdef CONFIG_S3C64XX_DEV_SPI0
-int s3c64xx_spi0_cfg_gpio(void)
-{
- s3c_gpio_cfgall_range(S5PC100_GPB(0), 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- return 0;
-}
-#endif
-
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-int s3c64xx_spi1_cfg_gpio(void)
-{
- s3c_gpio_cfgall_range(S5PC100_GPB(4), 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- return 0;
-}
-#endif
-
-#ifdef CONFIG_S3C64XX_DEV_SPI2
-int s3c64xx_spi2_cfg_gpio(void)
-{
- s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3));
- s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgall_range(S5PC100_GPB(2), 2,
- S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
- return 0;
-}
-#endif
diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c
index 2d67361ef431..90356ad10c54 100644
--- a/arch/arm/mach-s5pv210/dev-audio.c
+++ b/arch/arm/mach-s5pv210/dev-audio.c
@@ -10,7 +10,6 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
#include <linux/platform_data/asoc-s3c.h>
@@ -18,6 +17,7 @@
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
+#include <mach/gpio-samsung.h>
#define S5PV210_AUDSS_INT_MEM (0xC0000000)
diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio-samsung.h
index 6c8b903c02e4..e193b891e7b2 100644
--- a/arch/arm/mach-s5pv210/include/mach/gpio.h
+++ b/arch/arm/mach-s5pv210/include/mach/gpio-samsung.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/gpio.h
- *
+/*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
@@ -133,8 +132,4 @@ enum s5p_gpio_number {
#define S5PV210_GPIO_END (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + 1)
#define S3C_GPIO_END S5PV210_GPIO_END
-/* define the number of gpios we need to the one after the MP05() range */
-#define ARCH_NR_GPIOS (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + \
- CONFIG_SAMSUNG_GPIO_EXTRA + 1)
-
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index cc37edacda26..4262d8ff1988 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -31,6 +31,7 @@
#include <video/samsung_fimd.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
+#include <mach/gpio-samsung.h>
#include <plat/gpio-cfg.h>
#include <plat/devs.h>
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index c1ce921c4088..096a8173a1d9 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -38,6 +38,7 @@
#include <video/samsung_fimd.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
+#include <mach/gpio-samsung.h>
#include <plat/gpio-cfg.h>
#include <plat/devs.h>
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 2a6655fb63e7..a146089c9ee6 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -32,6 +32,7 @@
#include <mach/map.h>
#include <mach/regs-clock.h>
+#include <mach/gpio-samsung.h>
#include <plat/regs-srom.h>
#include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s5pv210/setup-fb-24bpp.c b/arch/arm/mach-s5pv210/setup-fb-24bpp.c
index 55103c8220b3..815e329f70c4 100644
--- a/arch/arm/mach-s5pv210/setup-fb-24bpp.c
+++ b/arch/arm/mach-s5pv210/setup-fb-24bpp.c
@@ -13,12 +13,12 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/fb.h>
-#include <linux/gpio.h>
#include <mach/map.h>
#include <plat/fb.h>
#include <mach/regs-clock.h>
#include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
static void s5pv210_fb_cfg_gpios(unsigned int base, unsigned int nr)
{
diff --git a/arch/arm/mach-s5pv210/setup-fimc.c b/arch/arm/mach-s5pv210/setup-fimc.c
index 54cc5b11be0b..36945ec437f8 100644
--- a/arch/arm/mach-s5pv210/setup-fimc.c
+++ b/arch/arm/mach-s5pv210/setup-fimc.c
@@ -8,9 +8,10 @@
* published by the Free Software Foundation.
*/
-#include <linux/gpio.h>
+#include <linux/kernel.h>
#include <plat/gpio-cfg.h>
#include <plat/camport.h>
+#include <mach/gpio-samsung.h>
int s5pv210_fimc_setup_gpio(enum s5p_camport_id id)
{
diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c
index 4a15849766c0..b0f2b69ac743 100644
--- a/arch/arm/mach-s5pv210/setup-i2c0.c
+++ b/arch/arm/mach-s5pv210/setup-i2c0.c
@@ -14,12 +14,12 @@
#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/gpio.h>
struct platform_device; /* don't need the contents */
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
diff --git a/arch/arm/mach-s5pv210/setup-i2c1.c b/arch/arm/mach-s5pv210/setup-i2c1.c
index 4777f6b97a92..aac1da7b9071 100644
--- a/arch/arm/mach-s5pv210/setup-i2c1.c
+++ b/arch/arm/mach-s5pv210/setup-i2c1.c
@@ -14,12 +14,12 @@
#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/gpio.h>
struct platform_device; /* don't need the contents */
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
{
diff --git a/arch/arm/mach-s5pv210/setup-i2c2.c b/arch/arm/mach-s5pv210/setup-i2c2.c
index bbce6c74b915..eff4503b903f 100644
--- a/arch/arm/mach-s5pv210/setup-i2c2.c
+++ b/arch/arm/mach-s5pv210/setup-i2c2.c
@@ -14,12 +14,12 @@
#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/gpio.h>
struct platform_device; /* don't need the contents */
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
void s3c_i2c2_cfg_gpio(struct platform_device *dev)
{
diff --git a/arch/arm/mach-s5pv210/setup-ide.c b/arch/arm/mach-s5pv210/setup-ide.c
index ea123d546bd2..5b6042d97892 100644
--- a/arch/arm/mach-s5pv210/setup-ide.c
+++ b/arch/arm/mach-s5pv210/setup-ide.c
@@ -11,9 +11,9 @@
*/
#include <linux/kernel.h>
-#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
static void s5pv210_ide_cfg_gpios(unsigned int base, unsigned int nr)
{
diff --git a/arch/arm/mach-s5pv210/setup-keypad.c b/arch/arm/mach-s5pv210/setup-keypad.c
index c56420a52f48..faf6178f3a1b 100644
--- a/arch/arm/mach-s5pv210/setup-keypad.c
+++ b/arch/arm/mach-s5pv210/setup-keypad.c
@@ -11,8 +11,8 @@
*
*/
-#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
{
diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
index 0512ada00522..0dd055b47579 100644
--- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
@@ -15,12 +15,12 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <linux/gpio.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <plat/gpio-cfg.h>
#include <plat/sdhci.h>
+#include <mach/gpio-samsung.h>
void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
diff --git a/arch/arm/mach-s5pv210/setup-spi.c b/arch/arm/mach-s5pv210/setup-spi.c
index 81aecc162f82..e1faf8ea4502 100644
--- a/arch/arm/mach-s5pv210/setup-spi.c
+++ b/arch/arm/mach-s5pv210/setup-spi.c
@@ -8,8 +8,8 @@
* published by the Free Software Foundation.
*/
-#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
+#include <mach/gpio-samsung.h>
#ifdef CONFIG_S3C64XX_DEV_SPI0
int s3c64xx_spi0_cfg_gpio(void)
diff --git a/arch/arm/mach-shmobile/board-ape6evm-reference.c b/arch/arm/mach-shmobile/board-ape6evm-reference.c
index 3276afcf3cc9..2f7723e5fe91 100644
--- a/arch/arm/mach-shmobile/board-ape6evm-reference.c
+++ b/arch/arm/mach-shmobile/board-ape6evm-reference.c
@@ -24,11 +24,13 @@
#include <linux/pinctrl/machine.h>
#include <linux/platform_device.h>
#include <linux/sh_clk.h>
-#include <mach/common.h>
-#include <mach/r8a73a4.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "common.h"
+#include "r8a73a4.h"
+
static void __init ape6evm_add_standard_devices(void)
{
diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c
index 7ab99a4972a0..1585b8830b13 100644
--- a/arch/arm/mach-shmobile/board-ape6evm.c
+++ b/arch/arm/mach-shmobile/board-ape6evm.c
@@ -33,12 +33,14 @@
#include <linux/regulator/machine.h>
#include <linux/sh_clk.h>
#include <linux/smsc911x.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/r8a73a4.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "common.h"
+#include "irqs.h"
+#include "r8a73a4.h"
+
/* LEDS */
static struct gpio_led ape6evm_leds[] = {
{
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
index f660fbb96e0b..208576667b22 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
@@ -24,11 +24,13 @@
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <linux/io.h>
-#include <mach/common.h>
-#include <mach/r8a7740.h>
+
#include <asm/mach/arch.h>
#include <asm/hardware/cache-l2x0.h>
+#include "common.h"
+#include "r8a7740.h"
+
/*
* CON1 Camera Module
* CON2 Extension Bus
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 689c121157ec..42b6afaa69af 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -45,9 +45,7 @@
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/i2c-gpio.h>
#include <linux/reboot.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/r8a7740.h>
+
#include <media/mt9t112.h>
#include <media/sh_mobile_ceu.h>
#include <media/soc_camera.h>
@@ -62,6 +60,10 @@
#include <sound/sh_fsi.h>
#include <sound/simple_card.h>
+#include "common.h"
+#include "irqs.h"
+#include "pm-rmobile.h"
+#include "r8a7740.h"
#include "sh-gpio.h"
/*
diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c
index 027373f8de82..ba840cd333b9 100644
--- a/arch/arm/mach-shmobile/board-bockw-reference.c
+++ b/arch/arm/mach-shmobile/board-bockw-reference.c
@@ -19,10 +19,12 @@
*/
#include <linux/of_platform.h>
-#include <mach/common.h>
-#include <mach/r8a7778.h>
+
#include <asm/mach/arch.h>
+#include "common.h"
+#include "r8a7778.h"
+
/*
* see board-bock.c for checking detail of dip-switch
*/
diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c
index 3ec82a4c35c5..8a83eb39d3f1 100644
--- a/arch/arm/mach-shmobile/board-bockw.c
+++ b/arch/arm/mach-shmobile/board-bockw.c
@@ -34,14 +34,16 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/usb/renesas_usbhs.h>
+
#include <media/soc_camera.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/r8a7778.h>
#include <asm/mach/arch.h>
#include <sound/rcar_snd.h>
#include <sound/simple_card.h>
+#include "common.h"
+#include "irqs.h"
+#include "r8a7778.h"
+
#define FPGA 0x18200000
#define IRQ0MR 0x30
#define COMCTLR 0x101c
diff --git a/arch/arm/mach-shmobile/board-genmai-reference.c b/arch/arm/mach-shmobile/board-genmai-reference.c
index 2ff6ad6e608e..e5448f7b868a 100644
--- a/arch/arm/mach-shmobile/board-genmai-reference.c
+++ b/arch/arm/mach-shmobile/board-genmai-reference.c
@@ -20,12 +20,14 @@
#include <linux/kernel.h>
#include <linux/of_platform.h>
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/r7s72100.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "clock.h"
+#include "common.h"
+#include "r7s72100.h"
+
/*
* This is a really crude hack to provide clkdev support to platform
* devices until they get moved to DT.
@@ -47,7 +49,7 @@ static const char * const genmai_boards_compat_dt[] __initconst = {
};
DT_MACHINE_START(GENMAI_DT, "genmai")
- .init_early = r7s72100_init_early,
+ .init_early = shmobile_init_delay,
.init_machine = genmai_add_standard_devices,
.dt_compat = genmai_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-genmai.c b/arch/arm/mach-shmobile/board-genmai.c
index 37184ff8c5c2..7bf2d8057535 100644
--- a/arch/arm/mach-shmobile/board-genmai.c
+++ b/arch/arm/mach-shmobile/board-genmai.c
@@ -25,12 +25,14 @@
#include <linux/sh_eth.h>
#include <linux/spi/rspi.h>
#include <linux/spi/spi.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/r7s72100.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "common.h"
+#include "irqs.h"
+#include "r7s72100.h"
+
/* Ether */
static const struct sh_eth_plat_data ether_pdata __initconst = {
.phy = 0x00, /* PD60610 */
@@ -153,7 +155,7 @@ static const char * const genmai_boards_compat_dt[] __initconst = {
};
DT_MACHINE_START(GENMAI_DT, "genmai")
- .init_early = r7s72100_init_early,
+ .init_early = shmobile_init_delay,
.init_machine = genmai_add_standard_devices,
.dt_compat = genmai_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c
index d322a162b4b0..1d3f67d4ccd6 100644
--- a/arch/arm/mach-shmobile/board-koelsch-reference.c
+++ b/arch/arm/mach-shmobile/board-koelsch-reference.c
@@ -23,12 +23,12 @@
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <linux/platform_data/rcar-du.h>
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/rcar-gen2.h>
#include <mach/r8a7791.h>
#include <asm/mach/arch.h>
+#include "clock.h"
+#include "common.h"
+#include "irqs.h"
+#include "rcar-gen2.h"
/* DU */
static struct rcar_du_encoder_data koelsch_du_encoders[] = {
diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c
index d3aa6ae05eeb..c932f2ca85b1 100644
--- a/arch/arm/mach-shmobile/board-koelsch.c
+++ b/arch/arm/mach-shmobile/board-koelsch.c
@@ -45,12 +45,12 @@
#include <linux/spi/flash.h>
#include <linux/spi/rspi.h>
#include <linux/spi/spi.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
#include <mach/r8a7791.h>
-#include <mach/rcar-gen2.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "common.h"
+#include "irqs.h"
+#include "rcar-gen2.h"
/* DU */
static struct rcar_du_encoder_data koelsch_du_encoders[] = {
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
index a735a1d80c28..5d2621f202d1 100644
--- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
+++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
@@ -25,12 +25,14 @@
#include <linux/irq.h>
#include <linux/input.h>
#include <linux/of_platform.h>
-#include <mach/sh73a0.h>
-#include <mach/common.h>
+
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "common.h"
+#include "sh73a0.h"
+
static void __init kzm_init(void)
{
sh73a0_add_standard_devices_dt();
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 01e0d1386db7..f8bc7f8f86ad 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -41,16 +41,18 @@
#include <linux/usb/r8a66597.h>
#include <linux/usb/renesas_usbhs.h>
#include <linux/videodev2.h>
+
#include <sound/sh_fsi.h>
#include <sound/simple_card.h>
-#include <mach/irqs.h>
-#include <mach/sh73a0.h>
-#include <mach/common.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <video/sh_mobile_lcdc.h>
+#include "common.h"
+#include "irqs.h"
+#include "sh73a0.h"
+
/*
* external GPIO
*/
diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c
index 749832e3f33c..8dcff51a8f45 100644
--- a/arch/arm/mach-shmobile/board-lager-reference.c
+++ b/arch/arm/mach-shmobile/board-lager-reference.c
@@ -22,13 +22,15 @@
#include <linux/init.h>
#include <linux/of_platform.h>
#include <linux/platform_data/rcar-du.h>
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/rcar-gen2.h>
-#include <mach/r8a7790.h>
+
#include <asm/mach/arch.h>
+#include "clock.h"
+#include "common.h"
+#include "irqs.h"
+#include "r8a7790.h"
+#include "rcar-gen2.h"
+
/* DU */
static struct rcar_du_encoder_data lager_du_encoders[] = {
{
@@ -129,7 +131,7 @@ static const char *lager_boards_compat_dt[] __initdata = {
DT_MACHINE_START(LAGER_DT, "lager")
.smp = smp_ops(r8a7790_smp_ops),
- .init_early = r8a7790_init_early,
+ .init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,
.init_machine = lager_add_standard_devices,
.init_late = shmobile_init_late,
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index d18296164e89..18331ac375f1 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -31,6 +31,8 @@
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/mtd.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/camera-rcar.h>
#include <linux/platform_data/gpio-rcar.h>
@@ -43,22 +45,23 @@
#include <linux/regulator/gpio-regulator.h>
#include <linux/regulator/machine.h>
#include <linux/sh_eth.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/rspi.h>
+#include <linux/spi/spi.h>
#include <linux/usb/phy.h>
#include <linux/usb/renesas_usbhs.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/r8a7790.h>
+
#include <media/soc_camera.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/mtd.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/rspi.h>
-#include <linux/spi/spi.h>
#include <sound/rcar_snd.h>
#include <sound/simple_card.h>
+#include "common.h"
+#include "irqs.h"
+#include "r8a7790.h"
+#include "rcar-gen2.h"
+
/*
* SSI-AK4643
*
@@ -880,7 +883,7 @@ static const char * const lager_boards_compat_dt[] __initconst = {
DT_MACHINE_START(LAGER_DT, "lager")
.smp = smp_ops(r8a7790_smp_ops),
- .init_early = r8a7790_init_early,
+ .init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,
.init_machine = lager_init,
.init_late = shmobile_init_late,
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 112553f0f9bf..79f448e93abb 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -47,10 +47,11 @@
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
-#include <linux/sh_intc.h>
+#include <linux/sh_clk.h>
#include <linux/tca6416_keypad.h>
#include <linux/usb/renesas_usbhs.h>
#include <linux/dma-mapping.h>
+
#include <video/sh_mobile_hdmi.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
@@ -58,15 +59,14 @@
#include <media/soc_camera_platform.h>
#include <sound/sh_fsi.h>
#include <sound/simple_card.h>
-
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/sh7372.h>
-
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include "common.h"
+#include "irqs.h"
+#include "pm-rmobile.h"
#include "sh-gpio.h"
+#include "sh7372.h"
/*
* Address Interface BusWidth note
diff --git a/arch/arm/mach-shmobile/board-marzen-reference.c b/arch/arm/mach-shmobile/board-marzen-reference.c
index 2773936bf7dc..94bd57203ff5 100644
--- a/arch/arm/mach-shmobile/board-marzen-reference.c
+++ b/arch/arm/mach-shmobile/board-marzen-reference.c
@@ -20,10 +20,10 @@
*/
#include <mach/r8a7779.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
+#include "common.h"
+#include "irqs.h"
static void __init marzen_init(void)
{
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index 6ed324ce848f..d0b5b746fe05 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -43,11 +43,11 @@
#include <linux/mfd/tmio.h>
#include <media/soc_camera.h>
#include <mach/r8a7779.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/traps.h>
+#include "common.h"
+#include "irqs.h"
/* Fixed 3.3V regulator to be used by SDHI0 */
static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c
index df187484de5d..3eb2ec401e0c 100644
--- a/arch/arm/mach-shmobile/clock-r7s72100.c
+++ b/arch/arm/mach-shmobile/clock-r7s72100.c
@@ -19,8 +19,9 @@
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
-#include <mach/common.h>
-#include <mach/r7s72100.h>
+
+#include "common.h"
+#include "r7s72100.h"
/* Frequency Control Registers */
#define FRQCR 0xfcfe0010
diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
index b5bc22c6a858..0f431498229b 100644
--- a/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -22,8 +22,8 @@
#include <linux/kernel.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
-#include <mach/clock.h>
-#include <mach/common.h>
+#include "common.h"
+#include "clock.h"
#define CPG_BASE 0xe6150000
#define CPG_LEN 0x270
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index 50931e3c97c7..789091cfa37a 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -22,9 +22,10 @@
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/r8a7740.h>
+
+#include "clock.h"
+#include "common.h"
+#include "r8a7740.h"
/*
* | MDx | XTAL1/EXTAL1 | System | EXTALR |
diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
index 13f8f3ab8840..16bbc94a1520 100644
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ b/arch/arm/mach-shmobile/clock-r8a7778.c
@@ -39,8 +39,8 @@
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
-#include <mach/clock.h>
-#include <mach/common.h>
+#include "clock.h"
+#include "common.h"
#define MSTPCR0 IOMEM(0xffc80030)
#define MSTPCR1 IOMEM(0xffc80034)
diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index a13298bd37a8..d81539a26dbd 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -23,8 +23,8 @@
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
-#include <mach/clock.h>
-#include <mach/common.h>
+#include "clock.h"
+#include "common.h"
/*
* MD1 = 1 MD1 = 0
diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index 296a057109e4..17435c1aa2fe 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -22,9 +22,11 @@
#include <linux/kernel.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/r8a7790.h>
+
+#include "clock.h"
+#include "common.h"
+#include "r8a7790.h"
+#include "rcar-gen2.h"
/*
* MD EXTAL PLL0 PLL1 PLL3
diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c
index e2fdfcc14436..10e193d707f5 100644
--- a/arch/arm/mach-shmobile/clock-r8a7791.c
+++ b/arch/arm/mach-shmobile/clock-r8a7791.c
@@ -23,9 +23,9 @@
#include <linux/kernel.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/rcar-gen2.h>
+#include "clock.h"
+#include "common.h"
+#include "rcar-gen2.h"
/*
* MD EXTAL PLL0 PLL1 PLL3
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index d16d9ca7f79e..7071676145c4 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -21,8 +21,8 @@
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
-#include <mach/clock.h>
-#include <mach/common.h>
+#include "clock.h"
+#include "common.h"
/* SH7372 registers */
#define FRQCRA IOMEM(0xe6150000)
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 0d9cd1fe0212..37f48383e05a 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -22,8 +22,8 @@
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
#include <asm/processor.h>
-#include <mach/clock.h>
-#include <mach/common.h>
+#include "clock.h"
+#include "common.h"
#define FRQCRA IOMEM(0xe6150000)
#define FRQCRB IOMEM(0xe6150004)
diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c
index e7232a0373b9..806f94038cc4 100644
--- a/arch/arm/mach-shmobile/clock.c
+++ b/arch/arm/mach-shmobile/clock.c
@@ -25,7 +25,7 @@
#ifdef CONFIG_COMMON_CLK
#include <linux/clk.h>
#include <linux/clkdev.h>
-#include <mach/clock.h>
+#include "clock.h"
void __init shmobile_clk_workaround(const struct clk_name *clks,
int nr_clks, bool enable)
@@ -49,8 +49,8 @@ void __init shmobile_clk_workaround(const struct clk_name *clks,
#else /* CONFIG_COMMON_CLK */
#include <linux/sh_clk.h>
#include <linux/export.h>
-#include <mach/clock.h>
-#include <mach/common.h>
+#include "clock.h"
+#include "common.h"
unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk)
{
diff --git a/arch/arm/mach-shmobile/include/mach/clock.h b/arch/arm/mach-shmobile/clock.h
index 31b6417463e6..31b6417463e6 100644
--- a/arch/arm/mach-shmobile/include/mach/clock.h
+++ b/arch/arm/mach-shmobile/clock.h
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/common.h
index f7a360edcc35..f7a360edcc35 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/common.h
diff --git a/arch/arm/mach-shmobile/console.c b/arch/arm/mach-shmobile/console.c
index 9411a5bf4fd6..f2e79f2376e1 100644
--- a/arch/arm/mach-shmobile/console.c
+++ b/arch/arm/mach-shmobile/console.c
@@ -19,8 +19,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <mach/common.h>
#include <asm/mach/map.h>
+#include "common.h"
void __init shmobile_setup_console(void)
{
diff --git a/arch/arm/mach-shmobile/include/mach/dma-register.h b/arch/arm/mach-shmobile/dma-register.h
index 97c40bd9b94f..97c40bd9b94f 100644
--- a/arch/arm/mach-shmobile/include/mach/dma-register.h
+++ b/arch/arm/mach-shmobile/dma-register.h
diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h
index d241bfd6926d..5aee83f079e2 100644
--- a/arch/arm/mach-shmobile/include/mach/irqs.h
+++ b/arch/arm/mach-shmobile/include/mach/irqs.h
@@ -1,24 +1,10 @@
#ifndef __ASM_MACH_IRQS_H
#define __ASM_MACH_IRQS_H
-#include <linux/sh_intc.h>
-
-/* GIC */
-#define gic_spi(nr) ((nr) + 32)
-#define gic_iid(nr) (nr) /* ICCIAR / interrupt ID */
-
-/* INTCS */
-#define INTCS_VECT_BASE 0x3400
-#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect))
-#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt))
+/* Stuck here until drivers/pinctl/sh-pfc gets rid of legacy code */
/* External IRQ pins */
#define IRQPIN_BASE 2000
#define irq_pin(nr) ((nr) + IRQPIN_BASE)
-/* GPIO IRQ */
-#define _GPIO_IRQ_BASE 2500
-#define GPIO_IRQ_BASE(x) (_GPIO_IRQ_BASE + (32 * x))
-#define GPIO_IRQ(x, y) (_GPIO_IRQ_BASE + (32 * x) + y)
-
#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h
index 88eeceaf1088..def10a29e09a 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7779.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h
@@ -2,8 +2,6 @@
#define __ASM_R8A7779_H__
#include <linux/sh_clk.h>
-#include <linux/pm_domain.h>
-#include <mach/pm-rcar.h>
/* HPB-DMA slave IDs */
enum {
@@ -12,16 +10,6 @@ enum {
HPBDMA_SLAVE_SDHI0_RX,
};
-struct r8a7779_pm_domain {
- struct generic_pm_domain genpd;
- struct rcar_sysc_ch ch;
-};
-
-static inline struct rcar_sysc_ch *to_r8a7779_ch(struct generic_pm_domain *d)
-{
- return &container_of(d, struct r8a7779_pm_domain, genpd)->ch;
-}
-
extern void r8a7779_init_delay(void);
extern void r8a7779_init_irq_extpin(int irlm);
extern void r8a7779_init_irq_extpin_dt(int irlm);
diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
index a91caad7db7c..e2af00b1bd9d 100644
--- a/arch/arm/mach-shmobile/intc-sh7372.c
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -22,11 +22,10 @@
#include <linux/module.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <linux/sh_intc.h>
-#include <mach/intc.h>
-#include <mach/irqs.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "intc.h"
+#include "irqs.h"
enum {
UNUSED_INTCA = 0,
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index 19a26f4579b3..44457a94897b 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -22,15 +22,16 @@
#include <linux/module.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <linux/sh_intc.h>
#include <linux/irqchip.h>
#include <linux/irqchip/arm-gic.h>
-#include <mach/intc.h>
-#include <mach/irqs.h>
-#include <mach/sh73a0.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "intc.h"
+#include "irqs.h"
+#include "sh73a0.h"
+
enum {
UNUSED = 0,
diff --git a/arch/arm/mach-shmobile/include/mach/intc.h b/arch/arm/mach-shmobile/intc.h
index a5603c76cfe0..a5603c76cfe0 100644
--- a/arch/arm/mach-shmobile/include/mach/intc.h
+++ b/arch/arm/mach-shmobile/intc.h
diff --git a/arch/arm/mach-shmobile/irqs.h b/arch/arm/mach-shmobile/irqs.h
new file mode 100644
index 000000000000..4ff2d2aa94f0
--- /dev/null
+++ b/arch/arm/mach-shmobile/irqs.h
@@ -0,0 +1,21 @@
+#ifndef __SHMOBILE_IRQS_H
+#define __SHMOBILE_IRQS_H
+
+#include <linux/sh_intc.h>
+#include <mach/irqs.h>
+
+/* GIC */
+#define gic_spi(nr) ((nr) + 32)
+#define gic_iid(nr) (nr) /* ICCIAR / interrupt ID */
+
+/* INTCS */
+#define INTCS_VECT_BASE 0x3400
+#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect))
+#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt))
+
+/* GPIO IRQ */
+#define _GPIO_IRQ_BASE 2500
+#define GPIO_IRQ_BASE(x) (_GPIO_IRQ_BASE + (32 * x))
+#define GPIO_IRQ(x, y) (_GPIO_IRQ_BASE + (32 * x) + y)
+
+#endif /* __SHMOBILE_IRQS_H */
diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
index 8cb641c00fdb..fe648f5d8f06 100644
--- a/arch/arm/mach-shmobile/platsmp-apmu.c
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -16,7 +16,7 @@
#include <asm/cacheflush.h>
#include <asm/cp15.h>
#include <asm/smp_plat.h>
-#include <mach/common.h>
+#include "common.h"
static struct {
void __iomem *iomem;
diff --git a/arch/arm/mach-shmobile/platsmp-scu.c b/arch/arm/mach-shmobile/platsmp-scu.c
index 673ad6e80869..64663110ab6c 100644
--- a/arch/arm/mach-shmobile/platsmp-scu.c
+++ b/arch/arm/mach-shmobile/platsmp-scu.c
@@ -15,7 +15,7 @@
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
-#include <mach/common.h>
+#include "common.h"
static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb,
unsigned long action, void *hcpu)
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index 9ebc246b8d7d..3923e09e966d 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -13,7 +13,7 @@
#include <linux/init.h>
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
-#include <mach/common.h>
+#include "common.h"
extern unsigned long shmobile_smp_fn[];
extern unsigned long shmobile_smp_arg[];
diff --git a/arch/arm/mach-shmobile/pm-r8a7740.c b/arch/arm/mach-shmobile/pm-r8a7740.c
index 40b87aa1d448..a0d44d537fa0 100644
--- a/arch/arm/mach-shmobile/pm-r8a7740.c
+++ b/arch/arm/mach-shmobile/pm-r8a7740.c
@@ -10,8 +10,8 @@
*/
#include <linux/console.h>
#include <linux/suspend.h>
-#include <mach/pm-rmobile.h>
-#include <mach/common.h>
+#include "common.h"
+#include "pm-rmobile.h"
#ifdef CONFIG_PM
static int r8a7740_pd_a4s_suspend(void)
diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c
index d6fe189b2df6..f0f36cb5ffe7 100644
--- a/arch/arm/mach-shmobile/pm-r8a7779.c
+++ b/arch/arm/mach-shmobile/pm-r8a7779.c
@@ -13,20 +13,31 @@
#include <linux/suspend.h>
#include <linux/err.h>
#include <linux/pm_clock.h>
+#include <linux/pm_domain.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/console.h>
#include <asm/io.h>
-#include <mach/common.h>
-#include <mach/pm-rcar.h>
#include <mach/r8a7779.h>
+#include "common.h"
+#include "pm-rcar.h"
/* SYSC */
#define SYSCIER 0x0c
#define SYSCIMR 0x10
+struct r8a7779_pm_domain {
+ struct generic_pm_domain genpd;
+ struct rcar_sysc_ch ch;
+};
+
+static inline struct rcar_sysc_ch *to_r8a7779_ch(struct generic_pm_domain *d)
+{
+ return &container_of(d, struct r8a7779_pm_domain, genpd)->ch;
+}
+
#if defined(CONFIG_PM) || defined(CONFIG_SMP)
static void __init r8a7779_sysc_init(void)
diff --git a/arch/arm/mach-shmobile/pm-r8a7790.c b/arch/arm/mach-shmobile/pm-r8a7790.c
index fc82839e2c2a..8845433a00b3 100644
--- a/arch/arm/mach-shmobile/pm-r8a7790.c
+++ b/arch/arm/mach-shmobile/pm-r8a7790.c
@@ -11,9 +11,11 @@
*/
#include <linux/kernel.h>
+
#include <asm/io.h>
-#include <mach/pm-rcar.h>
-#include <mach/r8a7790.h>
+
+#include "pm-rcar.h"
+#include "r8a7790.h"
/* SYSC */
#define SYSCIER 0x0c
diff --git a/arch/arm/mach-shmobile/pm-rcar.c b/arch/arm/mach-shmobile/pm-rcar.c
index 1f465a12d1b1..34b8a5674f85 100644
--- a/arch/arm/mach-shmobile/pm-rcar.c
+++ b/arch/arm/mach-shmobile/pm-rcar.c
@@ -13,7 +13,7 @@
#include <linux/mm.h>
#include <linux/spinlock.h>
#include <asm/io.h>
-#include <mach/pm-rcar.h>
+#include "pm-rcar.h"
/* SYSC */
#define SYSCSR 0x00
diff --git a/arch/arm/mach-shmobile/include/mach/pm-rcar.h b/arch/arm/mach-shmobile/pm-rcar.h
index ef3a1ef628f1..ef3a1ef628f1 100644
--- a/arch/arm/mach-shmobile/include/mach/pm-rcar.h
+++ b/arch/arm/mach-shmobile/pm-rcar.h
diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c
index f710235aff2f..ebdd16e94a84 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.c
+++ b/arch/arm/mach-shmobile/pm-rmobile.c
@@ -17,7 +17,7 @@
#include <linux/pm.h>
#include <linux/pm_clock.h>
#include <asm/io.h>
-#include <mach/pm-rmobile.h>
+#include "pm-rmobile.h"
/* SYSC */
#define SPDCR IOMEM(0xe6180008)
diff --git a/arch/arm/mach-shmobile/include/mach/pm-rmobile.h b/arch/arm/mach-shmobile/pm-rmobile.h
index 690553a06887..690553a06887 100644
--- a/arch/arm/mach-shmobile/include/mach/pm-rmobile.h
+++ b/arch/arm/mach-shmobile/pm-rmobile.h
diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c
index 0de75fd394b9..7e5c2676c489 100644
--- a/arch/arm/mach-shmobile/pm-sh7372.c
+++ b/arch/arm/mach-shmobile/pm-sh7372.c
@@ -21,13 +21,15 @@
#include <linux/irq.h>
#include <linux/bitrev.h>
#include <linux/console.h>
+
#include <asm/cpuidle.h>
#include <asm/io.h>
#include <asm/tlbflush.h>
#include <asm/suspend.h>
-#include <mach/common.h>
-#include <mach/sh7372.h>
-#include <mach/pm-rmobile.h>
+
+#include "common.h"
+#include "pm-rmobile.h"
+#include "sh7372.h"
/* DBG */
#define DBGREG1 IOMEM(0xe6100020)
diff --git a/arch/arm/mach-shmobile/pm-sh73a0.c b/arch/arm/mach-shmobile/pm-sh73a0.c
index 99086e98fbbc..a7e466817965 100644
--- a/arch/arm/mach-shmobile/pm-sh73a0.c
+++ b/arch/arm/mach-shmobile/pm-sh73a0.c
@@ -9,7 +9,7 @@
*/
#include <linux/suspend.h>
-#include <mach/common.h>
+#include "common.h"
#ifdef CONFIG_SUSPEND
static int sh73a0_enter_suspend(suspend_state_t suspend_state)
diff --git a/arch/arm/mach-shmobile/include/mach/r7s72100.h b/arch/arm/mach-shmobile/r7s72100.h
index 5f34b20ecd4a..efb723c88dd0 100644
--- a/arch/arm/mach-shmobile/include/mach/r7s72100.h
+++ b/arch/arm/mach-shmobile/r7s72100.h
@@ -3,6 +3,5 @@
void r7s72100_add_dt_devices(void);
void r7s72100_clock_init(void);
-void r7s72100_init_early(void);
#endif /* __ASM_R7S72100_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a73a4.h b/arch/arm/mach-shmobile/r8a73a4.h
index ce8bdd1d8a8a..ce8bdd1d8a8a 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a73a4.h
+++ b/arch/arm/mach-shmobile/r8a73a4.h
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/r8a7740.h
index 5e3c9ec06303..1d1a5fd78b6b 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7740.h
+++ b/arch/arm/mach-shmobile/r8a7740.h
@@ -19,8 +19,6 @@
#ifndef __ASM_R8A7740_H__
#define __ASM_R8A7740_H__
-#include <mach/pm-rmobile.h>
-
/*
* MD_CKx pin
*/
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/r8a7778.h
index f4076a50e970..f4076a50e970 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7778.h
+++ b/arch/arm/mach-shmobile/r8a7778.h
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/r8a7790.h
index 0b95babe84ba..459827f1369b 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7790.h
+++ b/arch/arm/mach-shmobile/r8a7790.h
@@ -1,8 +1,6 @@
#ifndef __ASM_R8A7790_H__
#define __ASM_R8A7790_H__
-#include <mach/rcar-gen2.h>
-
/* DMA slave IDs */
enum {
RCAR_DMA_SLAVE_INVALID,
@@ -33,7 +31,6 @@ void r8a7790_add_dt_devices(void);
void r8a7790_clock_init(void);
void r8a7790_pinmux_init(void);
void r8a7790_pm_init(void);
-void r8a7790_init_early(void);
extern struct smp_operations r8a7790_smp_ops;
#endif /* __ASM_R8A7790_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/rcar-gen2.h b/arch/arm/mach-shmobile/rcar-gen2.h
index 43f606eb2d82..43f606eb2d82 100644
--- a/arch/arm/mach-shmobile/include/mach/rcar-gen2.h
+++ b/arch/arm/mach-shmobile/rcar-gen2.h
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index d953ff6e78a2..b06a9e8f59a5 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -16,14 +16,13 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/clk-provider.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/of_platform.h>
-#include <mach/common.h>
+#include <linux/mm.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include "common.h"
static struct map_desc emev2_io_desc[] __initdata = {
#ifdef CONFIG_SMP
@@ -42,17 +41,6 @@ static void __init emev2_map_io(void)
iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc));
}
-static void __init emev2_init_delay(void)
-{
- shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
-}
-
-static void __init emev2_add_standard_devices_dt(void)
-{
- of_clk_init(NULL);
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
static const char *emev2_boards_compat_dt[] __initconst = {
"renesas,emev2",
NULL,
@@ -63,8 +51,7 @@ extern struct smp_operations emev2_smp_ops;
DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
.smp = smp_ops(emev2_smp_ops),
.map_io = emev2_map_io,
- .init_early = emev2_init_delay,
- .init_machine = emev2_add_standard_devices_dt,
+ .init_early = shmobile_init_delay,
.init_late = shmobile_init_late,
.dt_compat = emev2_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c
index 3885a598c66b..f3b3b14ba972 100644
--- a/arch/arm/mach-shmobile/setup-r7s72100.c
+++ b/arch/arm/mach-shmobile/setup-r7s72100.c
@@ -22,11 +22,13 @@
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <linux/sh_timer.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/r7s72100.h>
+
#include <asm/mach/arch.h>
+#include "common.h"
+#include "irqs.h"
+#include "r7s72100.h"
+
static struct resource mtu2_resources[] __initdata = {
DEFINE_RES_MEM(0xfcff0000, 0x400),
DEFINE_RES_IRQ_NAMED(gic_iid(139), "tgi0a"),
@@ -43,11 +45,6 @@ void __init r7s72100_add_dt_devices(void)
r7s72100_register_mtu2();
}
-void __init r7s72100_init_early(void)
-{
- shmobile_setup_delay(400, 1, 3); /* Cortex-A9 @ 400MHz */
-}
-
#ifdef CONFIG_USE_OF
static const char *r7s72100_boards_compat_dt[] __initdata = {
"renesas,r7s72100",
@@ -55,7 +52,7 @@ static const char *r7s72100_boards_compat_dt[] __initdata = {
};
DT_MACHINE_START(R7S72100_DT, "Generic R7S72100 (Flattened Device Tree)")
- .init_early = r7s72100_init_early,
+ .init_early = shmobile_init_delay,
.dt_compat = r7s72100_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index aaaaf6e8b706..cc9823246847 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -24,12 +24,14 @@
#include <linux/serial_sci.h>
#include <linux/sh_dma.h>
#include <linux/sh_timer.h>
-#include <mach/common.h>
-#include <mach/dma-register.h>
-#include <mach/irqs.h>
-#include <mach/r8a73a4.h>
+
#include <asm/mach/arch.h>
+#include "common.h"
+#include "dma-register.h"
+#include "irqs.h"
+#include "r8a73a4.h"
+
static const struct resource pfc_resources[] = {
DEFINE_RES_MEM(0xe6050000, 0x9000),
};
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 35dec233301e..348af358a239 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -31,16 +31,18 @@
#include <linux/sh_dma.h>
#include <linux/sh_timer.h>
#include <linux/platform_data/sh_ipmmu.h>
-#include <mach/dma-register.h>
-#include <mach/r8a7740.h>
-#include <mach/pm-rmobile.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
+
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include "common.h"
+#include "dma-register.h"
+#include "irqs.h"
+#include "pm-rmobile.h"
+#include "r8a7740.h"
+
static struct map_desc r8a7740_io_desc[] __initdata = {
/*
* for CPGA/INTC/PFC
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 5de7b33295d4..18490af0d0a0 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -37,12 +37,14 @@
#include <linux/usb/ehci_pdriver.h>
#include <linux/usb/ohci_pdriver.h>
#include <linux/dma-mapping.h>
-#include <mach/irqs.h>
-#include <mach/r8a7778.h>
-#include <mach/common.h>
+
#include <asm/mach/arch.h>
#include <asm/hardware/cache-l2x0.h>
+#include "common.h"
+#include "irqs.h"
+#include "r8a7778.h"
+
/* SCIF */
#define R8A7778_SCIF(index, baseaddr, irq) \
static struct plat_sci_port scif##index##_platform_data = { \
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 9c79182d0568..280303cef702 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -40,14 +40,14 @@
#include <linux/usb/ehci_pdriver.h>
#include <linux/usb/ohci_pdriver.h>
#include <linux/pm_runtime.h>
-#include <mach/irqs.h>
#include <mach/r8a7779.h>
-#include <mach/common.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <asm/hardware/cache-l2x0.h>
+#include "common.h"
+#include "irqs.h"
static struct map_desc r8a7779_io_desc[] __initdata = {
/* 2M entity map for 0xf0000000 (MPCORE) */
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 10e6768968f7..240411b42424 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -26,12 +26,15 @@
#include <linux/serial_sci.h>
#include <linux/sh_dma.h>
#include <linux/sh_timer.h>
-#include <mach/common.h>
-#include <mach/dma-register.h>
-#include <mach/irqs.h>
-#include <mach/r8a7790.h>
+
#include <asm/mach/arch.h>
+#include "common.h"
+#include "dma-register.h"
+#include "irqs.h"
+#include "r8a7790.h"
+#include "rcar-gen2.h"
+
/* Audio-DMAC */
#define AUDIO_DMAC_SLAVE(_id, _addr, t, r) \
{ \
@@ -307,13 +310,6 @@ void __init r8a7790_add_standard_devices(void)
r8a7790_register_audio_dmac(1);
}
-void __init r8a7790_init_early(void)
-{
-#ifndef CONFIG_ARM_ARCH_TIMER
- shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
-#endif
-}
-
#ifdef CONFIG_USE_OF
static const char * const r8a7790_boards_compat_dt[] __initconst = {
@@ -323,7 +319,7 @@ static const char * const r8a7790_boards_compat_dt[] __initconst = {
DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
.smp = smp_ops(r8a7790_smp_ops),
- .init_early = r8a7790_init_early,
+ .init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,
.dt_compat = r8a7790_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index fd5443715b8d..004b11a8fd88 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -26,11 +26,11 @@
#include <linux/platform_data/irq-renesas-irqc.h>
#include <linux/serial_sci.h>
#include <linux/sh_timer.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
#include <mach/r8a7791.h>
-#include <mach/rcar-gen2.h>
#include <asm/mach/arch.h>
+#include "common.h"
+#include "irqs.h"
+#include "rcar-gen2.h"
static const struct resource pfc_resources[] __initconst = {
DEFINE_RES_MEM(0xe6060000, 0x250),
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 542c5a47173f..fdc714ebc4cd 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -22,9 +22,9 @@
#include <linux/clocksource.h>
#include <linux/io.h>
#include <linux/kernel.h>
-#include <mach/common.h>
-#include <mach/rcar-gen2.h>
#include <asm/mach/arch.h>
+#include "common.h"
+#include "rcar-gen2.h"
#define MODEMR 0xe6160060
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 2a8b9f2a2f54..9cdfcdfd38fc 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -29,20 +29,22 @@
#include <linux/io.h>
#include <linux/serial_sci.h>
#include <linux/sh_dma.h>
-#include <linux/sh_intc.h>
#include <linux/sh_timer.h>
#include <linux/pm_domain.h>
#include <linux/dma-mapping.h>
#include <linux/platform_data/sh_ipmmu.h>
-#include <mach/dma-register.h>
-#include <mach/irqs.h>
-#include <mach/sh7372.h>
-#include <mach/common.h>
+
#include <asm/mach/map.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include "common.h"
+#include "dma-register.h"
+#include "irqs.h"
+#include "pm-rmobile.h"
+#include "sh7372.h"
+
static struct map_desc sh7372_io_desc[] __initdata = {
/* create a 1:1 entity map for 0xe6xxxxxx
* used by CPGA, INTC and PFC.
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index ad00724a2269..224882151667 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -29,19 +29,20 @@
#include <linux/io.h>
#include <linux/serial_sci.h>
#include <linux/sh_dma.h>
-#include <linux/sh_intc.h>
#include <linux/sh_timer.h>
#include <linux/platform_data/sh_ipmmu.h>
#include <linux/platform_data/irq-renesas-intc-irqpin.h>
-#include <mach/dma-register.h>
-#include <mach/irqs.h>
-#include <mach/sh73a0.h>
-#include <mach/common.h>
+
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include "common.h"
+#include "dma-register.h"
+#include "irqs.h"
+#include "sh73a0.h"
+
static struct map_desc sh73a0_io_desc[] __initdata = {
/* create a 1:1 entity map for 0xe6xxxxxx
* used by CPGA, INTC and PFC.
diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/sh7372.h
index 854a9f0ca040..4ad960d5075b 100644
--- a/arch/arm/mach-shmobile/include/mach/sh7372.h
+++ b/arch/arm/mach-shmobile/sh7372.h
@@ -11,10 +11,6 @@
#ifndef __ASM_SH7372_H__
#define __ASM_SH7372_H__
-#include <linux/sh_clk.h>
-#include <linux/pm_domain.h>
-#include <mach/pm-rmobile.h>
-
/* DMA slave IDs */
enum {
SHDMA_SLAVE_INVALID,
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/sh73a0.h
index 359b582dc270..359b582dc270 100644
--- a/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/arch/arm/mach-shmobile/sh73a0.h
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index 2dfd748da7f3..6ff1df1df9a7 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -23,9 +23,9 @@
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/delay.h>
-#include <mach/common.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
+#include "common.h"
#define EMEV2_SCU_BASE 0x1e000000
#define EMEV2_SMU_BASE 0xe0110000
diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index e7a3201473d0..c230fc0c3fef 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -23,13 +23,13 @@
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/delay.h>
-#include <mach/common.h>
-#include <mach/pm-rcar.h>
#include <mach/r8a7779.h>
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
#include <asm/smp_twd.h>
+#include "common.h"
+#include "pm-rcar.h"
#define AVECR IOMEM(0xfe700040)
#define R8A7779_SCU_BASE 0xf0000000
diff --git a/arch/arm/mach-shmobile/smp-r8a7790.c b/arch/arm/mach-shmobile/smp-r8a7790.c
index 591052799e8f..c256fdfbb5b0 100644
--- a/arch/arm/mach-shmobile/smp-r8a7790.c
+++ b/arch/arm/mach-shmobile/smp-r8a7790.c
@@ -17,10 +17,12 @@
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/io.h>
+
#include <asm/smp_plat.h>
-#include <mach/common.h>
-#include <mach/pm-rcar.h>
-#include <mach/r8a7790.h>
+
+#include "common.h"
+#include "pm-rcar.h"
+#include "r8a7790.h"
#define RST 0xe6160000
#define CA15BAR 0x0020
diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c
index ec979529f30f..2648d68650e4 100644
--- a/arch/arm/mach-shmobile/smp-r8a7791.c
+++ b/arch/arm/mach-shmobile/smp-r8a7791.c
@@ -18,9 +18,9 @@
#include <linux/smp.h>
#include <linux/io.h>
#include <asm/smp_plat.h>
-#include <mach/common.h>
#include <mach/r8a7791.h>
-#include <mach/rcar-gen2.h>
+#include "common.h"
+#include "rcar-gen2.h"
#define RST 0xe6160000
#define CA15BAR 0x0020
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 13ba36a6831f..22d8f87b23e9 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -22,11 +22,13 @@
#include <linux/smp.h>
#include <linux/io.h>
#include <linux/delay.h>
-#include <mach/common.h>
-#include <mach/sh73a0.h>
+
#include <asm/smp_plat.h>
#include <asm/smp_twd.h>
+#include "common.h"
+#include "sh73a0.h"
+
#define WUPCR IOMEM(0xe6151010)
#define SRESCR IOMEM(0xe6151018)
#define PSTR IOMEM(0xe6151040)
diff --git a/arch/arm/mach-spear/spear1310.c b/arch/arm/mach-spear/spear1310.c
index 824b12a56a42..d9ce4d8000f0 100644
--- a/arch/arm/mach-spear/spear1310.c
+++ b/arch/arm/mach-spear/spear1310.c
@@ -42,7 +42,7 @@ static const char * const spear1310_dt_board_compat[] = {
* PHYSICAL VIRTUAL
* 0xD8000000 0xFA000000
*/
-struct map_desc spear1310_io_desc[] __initdata = {
+static struct map_desc spear1310_io_desc[] __initdata = {
{
.virtual = VA_SPEAR1310_RAS_GRP1_BASE,
.pfn = __phys_to_pfn(SPEAR1310_RAS_GRP1_BASE),
diff --git a/arch/arm/mach-spear/spear1340.c b/arch/arm/mach-spear/spear1340.c
index 7b6bff7154e1..c601799b4aea 100644
--- a/arch/arm/mach-spear/spear1340.c
+++ b/arch/arm/mach-spear/spear1340.c
@@ -93,7 +93,7 @@ static int sata_miphy_init(struct device *dev, void __iomem *addr)
return 0;
}
-void sata_miphy_exit(struct device *dev)
+static void sata_miphy_exit(struct device *dev)
{
writel(0, SPEAR1340_PCIE_SATA_CFG);
writel(0, SPEAR1340_PCIE_MIPHY_CFG);
@@ -107,7 +107,7 @@ void sata_miphy_exit(struct device *dev)
msleep(20);
}
-int sata_suspend(struct device *dev)
+static int sata_suspend(struct device *dev)
{
if (dev->power.power_state.event == PM_EVENT_FREEZE)
return 0;
@@ -117,7 +117,7 @@ int sata_suspend(struct device *dev)
return 0;
}
-int sata_resume(struct device *dev)
+static int sata_resume(struct device *dev)
{
if (dev->power.power_state.event == PM_EVENT_THAW)
return 0;
diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c
index c9897ea38980..8b56fe61a492 100644
--- a/arch/arm/mach-spear/spear13xx.c
+++ b/arch/arm/mach-spear/spear13xx.c
@@ -57,7 +57,7 @@ void __init spear13xx_l2x0_init(void)
* 0xEC000000 0xFC000000
* 0xED000000 0xFB000000
*/
-struct map_desc spear13xx_io_desc[] __initdata = {
+static struct map_desc spear13xx_io_desc[] __initdata = {
{
.virtual = (unsigned long)VA_PERIP_GRP2_BASE,
.pfn = __phys_to_pfn(PERIP_GRP2_BASE),
diff --git a/arch/arm/mach-sti/platsmp.c b/arch/arm/mach-sti/platsmp.c
index fa2c33ffac04..d4b624f8dfcb 100644
--- a/arch/arm/mach-sti/platsmp.c
+++ b/arch/arm/mach-sti/platsmp.c
@@ -36,7 +36,7 @@ static void write_pen_release(int val)
static DEFINE_SPINLOCK(boot_lock);
-void sti_secondary_init(unsigned int cpu)
+static void sti_secondary_init(unsigned int cpu)
{
trace_hardirqs_off();
@@ -53,7 +53,7 @@ void sti_secondary_init(unsigned int cpu)
spin_unlock(&boot_lock);
}
-int sti_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int sti_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
@@ -97,7 +97,7 @@ int sti_boot_secondary(unsigned int cpu, struct task_struct *idle)
return pen_release != -1 ? -ENOSYS : 0;
}
-void __init sti_smp_prepare_cpus(unsigned int max_cpus)
+static void __init sti_smp_prepare_cpus(unsigned int max_cpus)
{
void __iomem *scu_base = NULL;
struct device_node *np = of_find_compatible_node(
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 6fbfbb77dcd9..e48a74458c25 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -2,24 +2,18 @@ asflags-y += -march=armv7-a
obj-y += io.o
obj-y += irq.o
-obj-y += fuse.o
-obj-y += pmc.o
obj-y += flowctrl.o
-obj-y += powergate.o
-obj-y += apbio.o
obj-y += pm.o
obj-y += reset.o
obj-y += reset-handler.o
obj-y += sleep.o
obj-y += tegra.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_speedo.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += sleep-tegra20.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += pm-tegra20.o
ifeq ($(CONFIG_CPU_IDLE),y)
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += cpuidle-tegra20.o
endif
-obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_speedo.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += sleep-tegra30.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += pm-tegra30.o
ifeq ($(CONFIG_CPU_IDLE),y)
@@ -28,7 +22,6 @@ endif
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_ARCH_TEGRA_114_SOC) += tegra114_speedo.o
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += sleep-tegra30.o
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += pm-tegra30.o
ifeq ($(CONFIG_CPU_IDLE),y)
diff --git a/arch/arm/mach-tegra/apbio.c b/arch/arm/mach-tegra/apbio.c
deleted file mode 100644
index bc471973cf04..000000000000
--- a/arch/arm/mach-tegra/apbio.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * Copyright (C) 2010 NVIDIA Corporation.
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
-#include <linux/spinlock.h>
-#include <linux/completion.h>
-#include <linux/sched.h>
-#include <linux/mutex.h>
-
-#include "apbio.h"
-#include "iomap.h"
-
-#if defined(CONFIG_TEGRA20_APB_DMA)
-static DEFINE_MUTEX(tegra_apb_dma_lock);
-static u32 *tegra_apb_bb;
-static dma_addr_t tegra_apb_bb_phys;
-static DECLARE_COMPLETION(tegra_apb_wait);
-
-static u32 tegra_apb_readl_direct(unsigned long offset);
-static void tegra_apb_writel_direct(u32 value, unsigned long offset);
-
-static struct dma_chan *tegra_apb_dma_chan;
-static struct dma_slave_config dma_sconfig;
-
-static bool tegra_apb_dma_init(void)
-{
- dma_cap_mask_t mask;
-
- mutex_lock(&tegra_apb_dma_lock);
-
- /* Check to see if we raced to setup */
- if (tegra_apb_dma_chan)
- goto skip_init;
-
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- tegra_apb_dma_chan = dma_request_channel(mask, NULL, NULL);
- if (!tegra_apb_dma_chan) {
- /*
- * This is common until the device is probed, so don't
- * shout about it.
- */
- pr_debug("%s: can not allocate dma channel\n", __func__);
- goto err_dma_alloc;
- }
-
- tegra_apb_bb = dma_alloc_coherent(NULL, sizeof(u32),
- &tegra_apb_bb_phys, GFP_KERNEL);
- if (!tegra_apb_bb) {
- pr_err("%s: can not allocate bounce buffer\n", __func__);
- goto err_buff_alloc;
- }
-
- dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- dma_sconfig.src_maxburst = 1;
- dma_sconfig.dst_maxburst = 1;
-
-skip_init:
- mutex_unlock(&tegra_apb_dma_lock);
- return true;
-
-err_buff_alloc:
- dma_release_channel(tegra_apb_dma_chan);
- tegra_apb_dma_chan = NULL;
-
-err_dma_alloc:
- mutex_unlock(&tegra_apb_dma_lock);
- return false;
-}
-
-static void apb_dma_complete(void *args)
-{
- complete(&tegra_apb_wait);
-}
-
-static int do_dma_transfer(unsigned long apb_add,
- enum dma_transfer_direction dir)
-{
- struct dma_async_tx_descriptor *dma_desc;
- int ret;
-
- if (dir == DMA_DEV_TO_MEM)
- dma_sconfig.src_addr = apb_add;
- else
- dma_sconfig.dst_addr = apb_add;
-
- ret = dmaengine_slave_config(tegra_apb_dma_chan, &dma_sconfig);
- if (ret)
- return ret;
-
- dma_desc = dmaengine_prep_slave_single(tegra_apb_dma_chan,
- tegra_apb_bb_phys, sizeof(u32), dir,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!dma_desc)
- return -EINVAL;
-
- dma_desc->callback = apb_dma_complete;
- dma_desc->callback_param = NULL;
-
- reinit_completion(&tegra_apb_wait);
-
- dmaengine_submit(dma_desc);
- dma_async_issue_pending(tegra_apb_dma_chan);
- ret = wait_for_completion_timeout(&tegra_apb_wait,
- msecs_to_jiffies(50));
-
- if (WARN(ret == 0, "apb read dma timed out")) {
- dmaengine_terminate_all(tegra_apb_dma_chan);
- return -EFAULT;
- }
- return 0;
-}
-
-static u32 tegra_apb_readl_using_dma(unsigned long offset)
-{
- int ret;
-
- if (!tegra_apb_dma_chan && !tegra_apb_dma_init())
- return tegra_apb_readl_direct(offset);
-
- mutex_lock(&tegra_apb_dma_lock);
- ret = do_dma_transfer(offset, DMA_DEV_TO_MEM);
- if (ret < 0) {
- pr_err("error in reading offset 0x%08lx using dma\n", offset);
- *(u32 *)tegra_apb_bb = 0;
- }
- mutex_unlock(&tegra_apb_dma_lock);
- return *((u32 *)tegra_apb_bb);
-}
-
-static void tegra_apb_writel_using_dma(u32 value, unsigned long offset)
-{
- int ret;
-
- if (!tegra_apb_dma_chan && !tegra_apb_dma_init()) {
- tegra_apb_writel_direct(value, offset);
- return;
- }
-
- mutex_lock(&tegra_apb_dma_lock);
- *((u32 *)tegra_apb_bb) = value;
- ret = do_dma_transfer(offset, DMA_MEM_TO_DEV);
- if (ret < 0)
- pr_err("error in writing offset 0x%08lx using dma\n", offset);
- mutex_unlock(&tegra_apb_dma_lock);
-}
-#else
-#define tegra_apb_readl_using_dma tegra_apb_readl_direct
-#define tegra_apb_writel_using_dma tegra_apb_writel_direct
-#endif
-
-typedef u32 (*apbio_read_fptr)(unsigned long offset);
-typedef void (*apbio_write_fptr)(u32 value, unsigned long offset);
-
-static apbio_read_fptr apbio_read;
-static apbio_write_fptr apbio_write;
-
-static u32 tegra_apb_readl_direct(unsigned long offset)
-{
- return readl(IO_ADDRESS(offset));
-}
-
-static void tegra_apb_writel_direct(u32 value, unsigned long offset)
-{
- writel(value, IO_ADDRESS(offset));
-}
-
-void tegra_apb_io_init(void)
-{
- /* Need to use dma only when it is Tegra20 based platform */
- if (of_machine_is_compatible("nvidia,tegra20") ||
- !of_have_populated_dt()) {
- apbio_read = tegra_apb_readl_using_dma;
- apbio_write = tegra_apb_writel_using_dma;
- } else {
- apbio_read = tegra_apb_readl_direct;
- apbio_write = tegra_apb_writel_direct;
- }
-}
-
-u32 tegra_apb_readl(unsigned long offset)
-{
- return apbio_read(offset);
-}
-
-void tegra_apb_writel(u32 value, unsigned long offset)
-{
- apbio_write(value, offset);
-}
diff --git a/arch/arm/mach-tegra/apbio.h b/arch/arm/mach-tegra/apbio.h
deleted file mode 100644
index f05d71c303c7..000000000000
--- a/arch/arm/mach-tegra/apbio.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2010 NVIDIA Corporation.
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_APBIO_H
-#define __MACH_TEGRA_APBIO_H
-
-void tegra_apb_io_init(void);
-u32 tegra_apb_readl(unsigned long offset);
-void tegra_apb_writel(u32 value, unsigned long offset);
-#endif
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 9c6029ba526f..bb4782a32713 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -17,9 +17,10 @@
*
*/
-#include <linux/platform_device.h>
#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
#include <linux/rfkill-gpio.h>
+
#include "board.h"
static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = {
diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h
index bcf5dbf69d58..da90c89296b9 100644
--- a/arch/arm/mach-tegra/board.h
+++ b/arch/arm/mach-tegra/board.h
@@ -28,13 +28,6 @@
void __init tegra_map_common_io(void);
void __init tegra_init_irq(void);
-int __init tegra_powergate_init(void);
-#if defined(CONFIG_ARCH_TEGRA_2x_SOC) && defined(CONFIG_DEBUG_FS)
-int __init tegra_powergate_debugfs_init(void);
-#else
-static inline int tegra_powergate_debugfs_init(void) { return 0; }
-#endif
-
void __init tegra_paz00_wifikill_init(void);
#endif
diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c
index b5fb7c110c64..e3ebdce3e71f 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra114.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra114.c
@@ -14,16 +14,16 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <linux/kernel.h>
-#include <linux/module.h>
+#include <asm/firmware.h>
+#include <linux/clockchips.h>
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
-#include <linux/clockchips.h>
-#include <asm/firmware.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <asm/cpuidle.h>
-#include <asm/suspend.h>
#include <asm/smp_plat.h>
+#include <asm/suspend.h>
#include "pm.h"
#include "sleep.h"
diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c
index b82dcaee2ef4..b30bf5cba65b 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra20.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra20.c
@@ -19,23 +19,23 @@
* more details.
*/
-#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/clk/tegra.h>
+#include <linux/clockchips.h>
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
-#include <linux/clockchips.h>
-#include <linux/clk/tegra.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <asm/cpuidle.h>
#include <asm/proc-fns.h>
-#include <asm/suspend.h>
#include <asm/smp_plat.h>
+#include <asm/suspend.h>
-#include "pm.h"
-#include "sleep.h"
+#include "flowctrl.h"
#include "iomap.h"
#include "irq.h"
-#include "flowctrl.h"
+#include "pm.h"
+#include "sleep.h"
#ifdef CONFIG_PM_SLEEP
static bool abort_flag;
diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c
index ed2a2a7bae4d..35561274f6cf 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra30.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra30.c
@@ -19,17 +19,17 @@
* more details.
*/
-#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/clk/tegra.h>
+#include <linux/clockchips.h>
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
-#include <linux/clockchips.h>
-#include <linux/clk/tegra.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <asm/cpuidle.h>
#include <asm/proc-fns.h>
-#include <asm/suspend.h>
#include <asm/smp_plat.h>
+#include <asm/suspend.h>
#include "pm.h"
#include "sleep.h"
diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c
index 7bc5d8d667fe..316563141add 100644
--- a/arch/arm/mach-tegra/cpuidle.c
+++ b/arch/arm/mach-tegra/cpuidle.c
@@ -24,12 +24,13 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include "fuse.h"
+#include <soc/tegra/fuse.h>
+
#include "cpuidle.h"
void __init tegra_cpuidle_init(void)
{
- switch (tegra_chip_id) {
+ switch (tegra_get_chip_id()) {
case TEGRA20:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
tegra20_cpuidle_init();
@@ -49,7 +50,7 @@ void __init tegra_cpuidle_init(void)
void tegra_cpuidle_pcie_irqs_in_use(void)
{
- switch (tegra_chip_id) {
+ switch (tegra_get_chip_id()) {
case TEGRA20:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
tegra20_cpuidle_pcie_irqs_in_use();
diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c
index ce8ab8abf061..ec55d1de1b55 100644
--- a/arch/arm/mach-tegra/flowctrl.c
+++ b/arch/arm/mach-tegra/flowctrl.c
@@ -18,14 +18,15 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <linux/cpumask.h>
#include <linux/init.h>
-#include <linux/kernel.h>
#include <linux/io.h>
-#include <linux/cpumask.h>
+#include <linux/kernel.h>
+
+#include <soc/tegra/fuse.h>
#include "flowctrl.h"
#include "iomap.h"
-#include "fuse.h"
static u8 flowctrl_offset_halt_cpu[] = {
FLOW_CTRL_HALT_CPU0_EVENTS,
@@ -76,7 +77,7 @@ void flowctrl_cpu_suspend_enter(unsigned int cpuid)
int i;
reg = flowctrl_read_cpu_csr(cpuid);
- switch (tegra_chip_id) {
+ switch (tegra_get_chip_id()) {
case TEGRA20:
/* clear wfe bitmap */
reg &= ~TEGRA20_FLOW_CTRL_CSR_WFE_BITMAP;
@@ -117,7 +118,7 @@ void flowctrl_cpu_suspend_exit(unsigned int cpuid)
/* Disable powergating via flow controller for CPU0 */
reg = flowctrl_read_cpu_csr(cpuid);
- switch (tegra_chip_id) {
+ switch (tegra_get_chip_id()) {
case TEGRA20:
/* clear wfe bitmap */
reg &= ~TEGRA20_FLOW_CTRL_CSR_WFE_BITMAP;
diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c
deleted file mode 100644
index c9ac23b385be..000000000000
--- a/arch/arm/mach-tegra/fuse.c
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * arch/arm/mach-tegra/fuse.c
- *
- * Copyright (C) 2010 Google, Inc.
- * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
- *
- * Author:
- * Colin Cross <ccross@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <linux/random.h>
-#include <linux/clk.h>
-#include <linux/tegra-soc.h>
-
-#include "fuse.h"
-#include "iomap.h"
-#include "apbio.h"
-
-/* Tegra20 only */
-#define FUSE_UID_LOW 0x108
-#define FUSE_UID_HIGH 0x10c
-
-/* Tegra30 and later */
-#define FUSE_VENDOR_CODE 0x200
-#define FUSE_FAB_CODE 0x204
-#define FUSE_LOT_CODE_0 0x208
-#define FUSE_LOT_CODE_1 0x20c
-#define FUSE_WAFER_ID 0x210
-#define FUSE_X_COORDINATE 0x214
-#define FUSE_Y_COORDINATE 0x218
-
-#define FUSE_SKU_INFO 0x110
-
-#define TEGRA20_FUSE_SPARE_BIT 0x200
-#define TEGRA30_FUSE_SPARE_BIT 0x244
-
-int tegra_sku_id;
-int tegra_cpu_process_id;
-int tegra_core_process_id;
-int tegra_chip_id;
-int tegra_cpu_speedo_id; /* only exist in Tegra30 and later */
-int tegra_soc_speedo_id;
-enum tegra_revision tegra_revision;
-
-static struct clk *fuse_clk;
-static int tegra_fuse_spare_bit;
-static void (*tegra_init_speedo_data)(void);
-
-/* The BCT to use at boot is specified by board straps that can be read
- * through a APB misc register and decoded. 2 bits, i.e. 4 possible BCTs.
- */
-int tegra_bct_strapping;
-
-#define STRAP_OPT 0x008
-#define GMI_AD0 (1 << 4)
-#define GMI_AD1 (1 << 5)
-#define RAM_ID_MASK (GMI_AD0 | GMI_AD1)
-#define RAM_CODE_SHIFT 4
-
-static const cha