diff options
1554 files changed, 109618 insertions, 41421 deletions
diff --git a/Documentation/ABI/testing/devlink-resource-mlxsw b/Documentation/ABI/testing/devlink-resource-mlxsw new file mode 100644 index 000000000000..259ed2948ec0 --- /dev/null +++ b/Documentation/ABI/testing/devlink-resource-mlxsw @@ -0,0 +1,33 @@ +What: /kvd/ +Date: 08-Jan-2018 +KernelVersion: v4.16 +Contact: mlxsw@mellanox.com +Description: The main database in the Spectrum device is a centralized + KVD database used for many of the tables used to configure + the chip including L2 FDB, L3 LPM, ECMP and more. The KVD + is divided into two sections, the first is hash-based table + and the second is a linear access table. The division + between the linear and hash-based sections is static and + require reload before the changes take effect. + +What: /kvd/linear +Date: 08-Jan-2018 +KernelVersion: v4.16 +Contact: mlxsw@mellanox.com +Description: The linear section of the KVD is managed by software as a + flat memory accessed using an index. + +What: /kvd/hash_single +Date: 08-Jan-2018 +KernelVersion: v4.16 +Contact: mlxsw@mellanox.com +Description: The hash based section of the KVD is managed by the switch + device. Used in case the key size is smaller or equal to + 64bit. + +What: /kvd/hash_double +Date: 08-Jan-2018 +KernelVersion: v4.16 +Contact: mlxsw@mellanox.com +Description: The hash based section of the KVD is managed by the switch + device. Used in case the key is larger than 64 bit. diff --git a/Documentation/ABI/testing/sysfs-class-net b/Documentation/ABI/testing/sysfs-class-net index 6856da99b6f7..2f1788111cd9 100644 --- a/Documentation/ABI/testing/sysfs-class-net +++ b/Documentation/ABI/testing/sysfs-class-net @@ -259,3 +259,27 @@ Contact: netdev@vger.kernel.org Description: Symbolic link to the PHY device this network device is attached to. + +What: /sys/class/net/<iface>/carrier_changes +Date: Mar 2014 +KernelVersion: 3.15 +Contact: netdev@vger.kernel.org +Description: + 32-bit unsigned integer counting the number of times the link has + seen a change from UP to DOWN and vice versa + +What: /sys/class/net/<iface>/carrier_up_count +Date: Jan 2018 +KernelVersion: 4.16 +Contact: netdev@vger.kernel.org +Description: + 32-bit unsigned integer counting the number of times the link has + been up + +What: /sys/class/net/<iface>/carrier_down_count +Date: Jan 2018 +KernelVersion: 4.16 +Contact: netdev@vger.kernel.org +Description: + 32-bit unsigned integer counting the number of times the link has + been down diff --git a/Documentation/bpf/bpf_devel_QA.txt b/Documentation/bpf/bpf_devel_QA.txt new file mode 100644 index 000000000000..cefef855dea4 --- /dev/null +++ b/Documentation/bpf/bpf_devel_QA.txt @@ -0,0 +1,519 @@ +This document provides information for the BPF subsystem about various +workflows related to reporting bugs, submitting patches, and queueing +patches for stable kernels. + +For general information about submitting patches, please refer to +Documentation/process/. This document only describes additional specifics +related to BPF. + +Reporting bugs: +--------------- + +Q: How do I report bugs for BPF kernel code? + +A: Since all BPF kernel development as well as bpftool and iproute2 BPF + loader development happens through the netdev kernel mailing list, + please report any found issues around BPF to the following mailing + list: + + netdev@vger.kernel.org + + This may also include issues related to XDP, BPF tracing, etc. + + Given netdev has a high volume of traffic, please also add the BPF + maintainers to Cc (from kernel MAINTAINERS file): + + Alexei Starovoitov <ast@kernel.org> + Daniel Borkmann <daniel@iogearbox.net> + + In case a buggy commit has already been identified, make sure to keep + the actual commit authors in Cc as well for the report. They can + typically be identified through the kernel's git tree. + + Please do *not* report BPF issues to bugzilla.kernel.org since it + is a guarantee that the reported issue will be overlooked. + +Submitting patches: +------------------- + +Q: To which mailing list do I need to submit my BPF patches? + +A: Please submit your BPF patches to the netdev kernel mailing list: + + netdev@vger.kernel.org + + Historically, BPF came out of networking and has always been maintained + by the kernel networking community. Although these days BPF touches + many other subsystems as well, the patches are still routed mainly + through the networking community. + + In case your patch has changes in various different subsystems (e.g. + tracing, security, etc), make sure to Cc the related kernel mailing + lists and maintainers from there as well, so they are able to review + the changes and provide their Acked-by's to the patches. + +Q: Where can I find patches currently under discussion for BPF subsystem? + +A: All patches that are Cc'ed to netdev are queued for review under netdev + patchwork project: + + http://patchwork.ozlabs.org/project/netdev/list/ + + Those patches which target BPF, are assigned to a 'bpf' delegate for + further processing from BPF maintainers. The current queue with + patches under review can be found at: + + https://patchwork.ozlabs.org/project/netdev/list/?delegate=77147 + + Once the patches have been reviewed by the BPF community as a whole + and approved by the BPF maintainers, their status in patchwork will be + changed to 'Accepted' and the submitter will be notified by mail. This + means that the patches look good from a BPF perspective and have been + applied to one of the two BPF kernel trees. + + In case feedback from the community requires a respin of the patches, + their status in patchwork will be set to 'Changes Requested', and purged + from the current review queue. Likewise for cases where patches would + get rejected or are not applicable to the BPF trees (but assigned to + the 'bpf' delegate). + +Q: How do the changes make their way into Linux? + +A: There are two BPF kernel trees (git repositories). Once patches have + been accepted by the BPF maintainers, they will be applied to one + of the two BPF trees: + + https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git/ + https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git/ + + The bpf tree itself is for fixes only, whereas bpf-next for features, + cleanups or other kind of improvements ("next-like" content). This is + analogous to net and net-next trees for networking. Both bpf and + bpf-next will only have a master branch in order to simplify against + which branch patches should get rebased to. + + Accumulated BPF patches in the bpf tree will regularly get pulled + into the net kernel tree. Likewise, accumulated BPF patches accepted + into the bpf-next tree will make their way into net-next tree. net and + net-next are both run by David S. Miller. From there, they will go + into the kernel mainline tree run by Linus Torvalds. To read up on the + process of net and net-next being merged into the mainline tree, see + the netdev FAQ under: + + Documentation/networking/netdev-FAQ.txt + + Occasionally, to prevent merge conflicts, we might send pull requests + to other trees (e.g. tracing) with a small subset of the patches, but + net and net-next are always the main trees targeted for integration. + + The pull requests will contain a high-level summary of the accumulated + patches and can be searched on netdev kernel mailing list through the + following subject lines (yyyy-mm-dd is the date of the pull request): + + pull-request: bpf yyyy-mm-dd + pull-request: bpf-next yyyy-mm-dd + +Q: How do I indicate which tree (bpf vs. bpf-next) my patch should be + applied to? + +A: The process is the very same as described in the netdev FAQ, so + please read up on it. The subject line must indicate whether the + patch is a fix or rather "next-like" content in order to let the + maintainers know whether it is targeted at bpf or bpf-next. + + For fixes eventually landing in bpf -> net tree, the subject must + look like: + + git format-patch --subject-prefix='PATCH bpf' start..finish + + For features/improvements/etc that should eventually land in + bpf-next -> net-next, the subject must look like: + + git format-patch --subject-prefix='PATCH bpf-next' start..finish + + If unsure whether the patch or patch series should go into bpf + or net directly, or bpf-next or net-next directly, it is not a + problem either if the subject line says net or net-next as target. + It is eventually up to the maintainers to do the delegation of + the patches. + + If it is clear that patches should go into bpf or bpf-next tree, + please make sure to rebase the patches against those trees in + order to reduce potential conflicts. + + In case the patch or patch series has to be reworked and sent out + again in a second or later revision, it is also required to add a + version number (v2, v3, ...) into the subject prefix: + + git format-patch --subject-prefix='PATCH net-next v2' start..finish + + When changes have been requested to the patch series, always send the + whole patch series again with the feedback incorporated (never send + individual diffs on top of the old series). + +Q: What does it mean when a patch gets applied to bpf or bpf-next tree? + +A: It means that the patch looks good for mainline inclusion from + a BPF point of view. + + Be aware that this is not a final verdict that the patch will + automatically get accepted into net or net-next trees eventually: + + On the netdev kernel mailing list reviews can come in at any point + in time. If discussions around a patch conclude that they cannot + get included as-is, we will either apply a follow-up fix or drop + them from the trees entirely. Therefore, we also reserve to rebase + the trees when deemed necessary. After all, the purpose of the tree + is to i) accumulate and stage BPF patches for integration into trees + like net and net-next, and ii) run extensive BPF test suite and + workloads on the patches before they make their way any further. + + Once the BPF pull request was accepted by David S. Miller, then + the patches end up in net or net-next tree, respectively, and + make their way from there further into mainline. Again, see the + netdev FAQ for additional information e.g. on how often they are + merged to mainline. + +Q: How long do I need to wait for feedback on my BPF patches? + +A: We try to keep the latency low. The usual time to feedback will + be around 2 or 3 business days. It may vary depending on the + complexity of changes and current patch load. + +Q: How often do you send pull requests to major kernel trees like + net or net-next? + +A: Pull requests will be sent out rather often in order to not + accumulate too many patches in bpf or bpf-next. + + As a rule of thumb, expect pull requests for each tree regularly + at the end of the week. In some cases pull requests could additionally + come also in the middle of the week depending on the current patch + load or urgency. + +Q: Are patches applied to bpf-next when the merge window is open? + +A: For the time when the merge window is open, bpf-next will not be + processed. This is roughly analogous to net-next patch processing, + so feel free to read up on the netdev FAQ about further details. + + During those two weeks of merge window, we might ask you to resend + your patch series once bpf-next is open again. Once Linus released + a v*-rc1 after the merge window, we continue processing of bpf-next. + + For non-subscribers to kernel mailing lists, there is also a status + page run by David S. Miller on net-next that provides guidance: + + http://vger.kernel.org/~davem/net-next.html + +Q: I made a BPF verifier change, do I need to add test cases for + BPF kernel selftests? + +A: If the patch has changes to the behavior of the verifier, then yes, + it is absolutely necessary to add test cases to the BPF kernel + selftests suite. If they are not present and we think they are + needed, then we might ask for them before accepting any changes. + + In particular, test_verifier.c is tracking a high number of BPF test + cases, including a lot of corner cases that LLVM BPF back end may + generate out of the restricted C code. Thus, adding test cases is + absolutely crucial to make sure future changes do not accidentally + affect prior use-cases. Thus, treat those test cases as: verifier + behavior that is not tracked in test_verifier.c could potentially + be subject to change. + +Q: When should I add code to samples/bpf/ and when to BPF kernel + selftests? + +A: In general, we prefer additions to BPF kernel selftests rather than + samples/bpf/. The rationale is very simple: kernel selftests are + regularly run by various bots to test for kernel regressions. + + The more test cases we add to BPF selftests, the better the coverage + and the less likely it is that those could accidentally break. It is + not that BPF kernel selftests cannot demo how a specific feature can + be used. + + That said, samples/bpf/ may be a good place for people to get started, + so it might be advisable that simple demos of features could go into + samples/bpf/, but advanced functional and corner-case testing rather + into kernel selftests. + + If your sample looks like a test case, then go for BPF kernel selftests + instead! + +Q: When should I add code to the bpftool? + +A: The main purpose of bpftool (under tools/bpf/bpftool/) is to provide + a central user space tool for debugging and introspection of BPF programs + and maps that are active in the kernel. If UAPI changes related to BPF + enable for dumping additional information of programs or maps, then + bpftool should be extended as well to support dumping them. + +Q: When should I add code to iproute2's BPF loader? + +A: For UAPI changes related to the XDP or tc layer (e.g. cls_bpf), the + convention is that those control-path related changes are added to + iproute2's BPF loader as well from user space side. This is not only + useful to have UAPI changes properly designed to be usable, but also + to make those changes available to a wider user base of major + downstream distributions. + +Q: Do you accept patches as well for iproute2's BPF loader? + +A: Patches for the iproute2's BPF loader have to be sent to: + + netdev@vger.kernel.org + + While those patches are not processed by the BPF kernel maintainers, + please keep them in Cc as well, so they can be reviewed. + + The official git repository for iproute2 is run by Stephen Hemminger + and can be found at: + + https://git.kernel.org/pub/scm/linux/kernel/git/shemminger/iproute2.git/ + + The patches need to have a subject prefix of '[PATCH iproute2 master]' + or '[PATCH iproute2 net-next]'. 'master' or 'net-next' describes the + target branch where the patch should be applied to. Meaning, if kernel + changes went into the net-next kernel tree, then the related iproute2 + changes need to go into the iproute2 net-next branch, otherwise they + can be targeted at master branch. The iproute2 net-next branch will get + merged into the master branch after the current iproute2 version from + master has been released. + + Like BPF, the patches end up in patchwork under the netdev project and + are delegated to 'shemminger' for further processing: + + http://patchwork.ozlabs.org/project/netdev/list/?delegate=389 + +Q: What is the minimum requirement before I submit my BPF patches? + +A: When submitting patches, always take the time and properly test your + patches *prior* to submission. Never rush them! If maintainers find + that your patches have not been properly tested, it is a good way to + get them grumpy. Testing patch submissions is a hard requirement! + + Note, fixes that go to bpf tree *must* have a Fixes: tag included. The + same applies to fixes that target bpf-next, where the affected commit + is in net-next (or in some cases bpf-next). The Fixes: tag is crucial + in order to identify follow-up commits and tremendously helps for people + having to do backporting, so it is a must have! + + We also don't accept patches with an empty commit message. Take your + time and properly write up a high quality commit message, it is + essential! + + Think about it this way: other developers looking at your code a month + from now need to understand *why* a certain change has been done that + way, and whether there have been flaws in the analysis or assumptions + that the original author did. Thus providing a proper rationale and + describing the use-case for the changes is a must. + + Patch submissions with >1 patch must have a cover letter which includes + a high level description of the series. This high level summary will + then be placed into the merge commit by the BPF maintainers such that + it is also accessible from the git log for future reference. + +Q: What do I need to consider when adding a new instruction or feature + that would require BPF JIT and/or LLVM integration as well? + +A: We try hard to keep all BPF JITs up to date such that the same user + experience can be guaranteed when running BPF programs on different + architectures without having the program punt to the less efficient + interpreter in case the in-kernel BPF JIT is enabled. + + If you are unable to implement or test the required JIT changes for + certain architectures, please work together with the related BPF JIT + developers in order to get the feature implemented in a timely manner. + Please refer to the git log (arch/*/net/) to locate the necessary + people for helping out. + + Also always make sure to add BPF test cases (e.g. test_bpf.c and + test_verifier.c) for new instructions, so that they can receive + broad test coverage and help run-time testing the various BPF JITs. + + In case of new BPF instructions, once the changes have been accepted + into the Linux kernel, please implement support into LLVM's BPF back + end. See LLVM section below for further information. + +Stable submission: +------------------ + +Q: I need a specific BPF commit in stable kernels. What should I do? + +A: In case you need a specific fix in stable kernels, first check whether + the commit has already been applied in the related linux-*.y branches: + + https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/ + + If not the case, then drop an email to the BPF maintainers with the + netdev kernel mailing list in Cc and ask for the fix to be queued up: + + netdev@vger.kernel.org + + The process in general is the same as on netdev itself, see also the + netdev FAQ document. + +Q: Do you also backport to kernels not currently maintained as stable? + +A: No. If you need a specific BPF commit in kernels that are currently not + maintained by the stable maintainers, then you are on your own. + + The current stable and longterm stable kernels are all listed here: + + https://www.kernel.org/ + +Q: The BPF patch I am about to submit needs to go to stable as well. What + should I do? + +A: The same rules apply as with netdev patch submissions in general, see + netdev FAQ under: + + Documentation/networking/netdev-FAQ.txt + + Never add "Cc: stable@vger.kernel.org" to the patch description, but + ask the BPF maintainers to queue the patches instead. This can be done + with a note, for example, under the "---" part of the patch which does + not go into the git log. Alternatively, this can be done as a simple + request by mail instead. + +Q: Where do I find currently queued BPF patches that will be submitted + to stable? + +A: Once patches that fix critical bugs got applied into the bpf tree, they + are queued up for stable submission under: + + http://patchwork.ozlabs.org/bundle/bpf/stable/?state=* + + They will be on hold there at minimum until the related commit made its + way into the mainline kernel tree. + + After having been under broader exposure, the queued patches will be + submitted by the BPF maintainers to the stable maintainers. + +Testing patches: +---------------- + +Q: Which BPF kernel selftests version should I run my kernel against? + +A: If you run a kernel xyz, then always run the BPF kernel selftests from + that kernel xyz as well. Do not expect that the BPF selftest from the + latest mainline tree will pass all the time. + + In particular, test_bpf.c and test_verifier.c have a large number of + test cases and are constantly updated with new BPF test sequences, or + existing ones are adapted to verifier changes e.g. due to verifier + becoming smarter and being able to better track certain things. + +LLVM: +----- + +Q: Where do I find LLVM with BPF support? + +A: The BPF back end for LLVM is upstream in LLVM since version 3.7.1. + + All major distributions these days ship LLVM with BPF back end enabled, + so for the majority of use-cases it is not required to compile LLVM by + hand anymore, just install the distribution provided package. + + LLVM's static compiler lists the supported targets through 'llc --version', + make sure BPF targets are listed. Example: + + $ llc --version + LLVM (http://llvm.org/): + LLVM version 6.0.0svn + Optimized build. + Default target: x86_64-unknown-linux-gnu + Host CPU: skylake + + Registered Targets: + bpf - BPF (host endian) + bpfeb - BPF (big endian) + bpfel - BPF (little endian) + x86 - 32-bit X86: Pentium-Pro and above + x86-64 - 64-bit X86: EM64T and AMD64 + + For developers in order to utilize the latest features added to LLVM's + BPF back end, it is advisable to run the latest LLVM releases. Support + for new BPF kernel features such as additions to the BPF instruction + set are often developed together. + + All LLVM releases can be found at: http://releases.llvm.org/ + +Q: Got it, so how do I build LLVM manually anyway? + +A: You need cmake and gcc-c++ as build requisites for LLVM. Once you have + that set up, proceed with building the latest LLVM and clang version + from the git repositories: + + $ git clone http://llvm.org/git/llvm.git + $ cd llvm/tools + $ git clone --depth 1 http://llvm.org/git/clang.git + $ cd ..; mkdir build; cd build + $ cmake .. -DLLVM_TARGETS_TO_BUILD="BPF;X86" \ + -DBUILD_SHARED_LIBS=OFF \ + -DCMAKE_BUILD_TYPE=Release \ + -DLLVM_BUILD_RUNTIME=OFF + $ make -j $(getconf _NPROCESSORS_ONLN) + + The built binaries can then be found in the build/bin/ directory, where + you can point the PATH variable to. + +Q: Should I notify BPF kernel maintainers about issues in LLVM's BPF code + generation back end or about LLVM generated code that the verifier + refuses to accept? + +A: Yes, please do! LLVM's BPF back end is a key piece of the whole BPF + infrastructure and it ties deeply into verification of programs from the + kernel side. Therefore, any issues on either side need to be investigated + and fixed whenever necessary. + + Therefore, please make sure to bring them up at netdev kernel mailing + list and Cc BPF maintainers for LLVM and kernel bits: + + Yonghong Song <yhs@fb.com> + Alexei Starovoitov <ast@kernel.org> + Daniel Borkmann <daniel@iogearbox.net> + + LLVM also has an issue tracker where BPF related bugs can be found: + + https://bugs.llvm.org/buglist.cgi?quicksearch=bpf + + However, it is better to reach out through mailing lists with having + maintainers in Cc. + +Q: I have added a new BPF instruction to the kernel, how can I integrate + it into LLVM? + +A: LLVM has a -mcpu selector for the BPF back end in order to allow the + selection of BPF instruction set extensions. By default the 'generic' + processor target is used, which is the base instruction set (v1) of BPF. + + LLVM has an option to select -mcpu=probe where it will probe the host + kernel for supported BPF instruction set extensions and selects the + optimal set automatically. + + For cross-compilation, a specific version can be select manually as well. + + $ llc -march bpf -mcpu=help + Available CPUs for this target: + + generic - Select the generic processor. + probe - Select the probe processor. + v1 - Select the v1 processor. + v2 - Select the v2 processor. + [...] + + Newly added BPF instructions to the Linux kernel need to follow the same + scheme, bump the instruction set version and implement probing for the + extensions such that -mcpu=probe users can benefit from the optimization + transparently when upgrading their kernels. + + If you are unable to implement support for the newly added BPF instruction + please reach out to BPF developers for help. + + By the way, the BPF kernel selftests run with -mcpu=probe for better + test coverage. + +Happy BPF hacking! diff --git a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt index 9a734d808aa7..b7336b9d6a3c 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt +++ b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt @@ -2,7 +2,10 @@ Required properties: -- compatible: should be "brcm,bcm7445-switch-v4.0" or "brcm,bcm7278-switch-v4.0" +- compatible: should be one of + "brcm,bcm7445-switch-v4.0" + "brcm,bcm7278-switch-v4.0" + "brcm,bcm7278-switch-v4.8" - reg: addresses and length of the register sets for the device, must be 6 pairs of register addresses and lengths - interrupts: interrupts for the devices, must be two interrupts diff --git a/Documentation/devicetree/bindings/net/can/can-transceiver.txt b/Documentation/devicetree/bindings/net/can/can-transceiver.txt new file mode 100644 index 000000000000..0011f53ff159 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/can-transceiver.txt @@ -0,0 +1,24 @@ +Generic CAN transceiver Device Tree binding +------------------------------ + +CAN transceiver typically limits the max speed in standard CAN and CAN FD +modes. Typically these limitations are static and the transceivers themselves +provide no way to detect this limitation at runtime. For this situation, +the "can-transceiver" node can be used. + +Required Properties: + max-bitrate: a positive non 0 value that determines the max + speed that CAN/CAN-FD can run. Any other value + will be ignored. + +Examples: + +Based on Texas Instrument's TCAN1042HGV CAN Transceiver + +m_can0 { + .... + can-transceiver { + max-bitrate = <5000000>; + }; + ... +}; diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt index 56d6cc336e1c..bfc0c433654f 100644 --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt +++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt @@ -18,6 +18,12 @@ Optional properties: - xceiver-supply: Regulator that powers the CAN transceiver +- big-endian: This means the registers of FlexCAN controller are big endian. + This is optional property.i.e. if this property is not present in + device tree node then controller is assumed to be little endian. + if this property is present then controller is assumed to be big + endian. + Example: can@1c000 { diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt index 63e90421d029..ed614383af9c 100644 --- a/Documentation/devicetree/bindings/net/can/m_can.txt +++ b/Documentation/devicetree/bindings/net/can/m_can.txt @@ -43,6 +43,11 @@ Required properties: Please refer to 2.4.1 Message RAM Configuration in Bosch M_CAN user manual for details. +Optional Subnode: +- can-transceiver : Can-transceiver subnode describing maximum speed + that can be used for CAN/CAN-FD modes. See + Documentation/devicetree/bindings/net/can/can-transceiver.txt + for details. Example: SoC dtsi: m_can1: can@20e8000 { @@ -63,4 +68,8 @@ Board dts: pinctrl-names = "default"; pinctrl-0 = <&pinctrl_m_can1>; status = "enabled"; + + can-transceiver { + max-bitrate = <5000000>; + }; }; diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt new file mode 100644 index 000000000000..6c559981d110 --- /dev/null +++ b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt @@ -0,0 +1,92 @@ +Cortina Systems Gemini Ethernet Controller +========================================== + +This ethernet controller is found in the Gemini SoC family: +StorLink SL3512 and SL3516, also known as Cortina Systems +CS3512 and CS3516. + +Required properties: +- compatible: must be "cortina,gemini-ethernet" +- reg: must contain the global registers and the V-bit and A-bit + memory areas, in total three register sets. +- syscon: a phandle to the system controller +- #address-cells: must be specified, must be <1> +- #size-cells: must be specified, must be <1> +- ranges: should be state like this giving a 1:1 address translation + for the subnodes + +The subnodes represents the two ethernet ports in this device. +They are not independent of each other since they share resources +in the parent node, and are thus children. + +Required subnodes: +- port0: contains the resources for ethernet port 0 +- port1: contains the resources for ethernet port 1 + +Required subnode properties: +- compatible: must be "cortina,gemini-ethernet-port" +- reg: must contain two register areas: the DMA/TOE memory and + the GMAC memory area of the port +- interrupts: should contain the interrupt line of the port. + this is nominally a level interrupt active high. +- resets: this must provide an SoC-integrated reset line for + the port. +- clocks: this should contain a handle to the PCLK clock for + clocking the silicon in this port +- clock-names: must be "PCLK" + +Optional subnode properties: +- phy-mode: see ethernet.txt +- phy-handle: see ethernet.txt + +Example: + +mdio-bus { + (...) + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@3 { + reg = <3>; + device_type = "ethernet-phy"; + }; +}; + + +ethernet@60000000 { + compatible = "cortina,gemini-ethernet"; + reg = <0x60000000 0x4000>, /* Global registers, queue */ + <0x60004000 0x2000>, /* V-bit */ + <0x60006000 0x2000>; /* A-bit */ + syscon = <&syscon>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gmac0: ethernet-port@0 { + compatible = "cortina,gemini-ethernet-port"; + reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */ + <0x6000a000 0x2000>; /* Port 0 GMAC */ + interrupt-parent = <&intcon>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon GEMINI_RESET_GMAC0>; + clocks = <&syscon GEMINI_CLK_GATE_GMAC0>; + clock-names = "PCLK"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + + gmac1: ethernet-port@1 { + compatible = "cortina,gemini-ethernet-port"; + reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */ + <0x6000e000 0x2000>; /* Port 1 GMAC */ + interrupt-parent = <&intcon>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon GEMINI_RESET_GMAC1>; + clocks = <&syscon GEMINI_CLK_GATE_GMAC1>; + clock-names = "PCLK"; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; +}; diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index f0dc94409107..2d41fb96ce0a 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -59,7 +59,7 @@ ethernet@83fec000 { reg = <0x83fec000 0x4000>; interrupts = <87>; phy-mode = "mii"; - phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */ + phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; /* GPIO2_14 */ local-mac-address = [00 04 9F 01 1B B9]; phy-supply = <®_fec_supply>; }; @@ -71,7 +71,7 @@ ethernet@83fec000 { reg = <0x83fec000 0x4000>; interrupts = <87>; phy-mode = "mii"; - phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */ + phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; /* GPIO2_14 */ local-mac-address = [00 04 9F 01 1B B9]; phy-supply = <®_fec_supply>; phy-handle = <ðphy>; diff --git a/Documentation/devicetree/bindings/net/ieee802154/adf7242.txt b/Documentation/devicetree/bindings/net/ieee802154/adf7242.txt index dea5124cdc52..d24172cc6d32 100644 --- a/Documentation/devicetree/bindings/net/ieee802154/adf7242.txt +++ b/Documentation/devicetree/bindings/net/ieee802154/adf7242.txt @@ -1,7 +1,7 @@ * ADF7242 IEEE 802.15.4 * Required properties: - - compatible: should be "adi,adf7242" + - compatible: should be "adi,adf7242", "adi,adf7241" - spi-max-frequency: maximal bus speed (12.5 MHz) - reg: the chipselect index - interrupts: the interrupt generated by the device via pin IRQ1. diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt index 214eaa9a6683..53c13ee384a4 100644 --- a/Documentation/devicetree/bindings/net/mediatek-net.txt +++ b/Documentation/devicetree/bindings/net/mediatek-net.txt @@ -28,7 +28,7 @@ Required properties: - mediatek,sgmiisys: phandle to the syscon node that handles the SGMII setup which is required for those SoCs equipped with SGMII such as MT7622 SoC. - mediatek,pctl: phandle to the syscon node that handles the ports slew rate - and driver current + and driver current: only for MT2701 and MT7623 SoC Optional properties: - interrupt-parent: Should be the phandle for the interrupt controller diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt index 77d0b2a61ffa..d2169a56f5e3 100644 --- a/Documentation/devicetree/bindings/net/phy.txt +++ b/Documentation/devicetree/bindings/net/phy.txt @@ -53,6 +53,14 @@ Optional Properties: to ensure the integrated PHY is used. The absence of this property indicates the muxers should be configured so that the external PHY is used. +- reset-gpios: The GPIO phandle and specifier for the PHY reset signal. + +- reset-assert-us: Delay after the reset was asserted in microseconds. + If this property is missing the delay will be skipped. + +- reset-deassert-us: Delay after the reset was deasserted in microseconds. + If this property is missing the delay will be skipped. + Example: ethernet-phy@0 { @@ -60,4 +68,8 @@ ethernet-phy@0 { interrupt-parent = <&PIC>; interrupts = <35 IRQ_TYPE_EDGE_RISING>; reg = <0>; + + reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + reset-assert-us = <1000>; + reset-deassert-us = <2000>; }; diff --git a/Documentation/devicetree/bindings/net/sff,sfp.txt b/Documentation/devicetree/bindings/net/sff,sfp.txt index 60e970ce10ee..f1c441bedf68 100644 --- a/Documentation/devicetree/bindings/net/sff,sfp.txt +++ b/Documentation/devicetree/bindings/net/sff,sfp.txt @@ -3,7 +3,9 @@ Transceiver Required properties: -- compatible : must be "sff,sfp" +- compatible : must be one of + "sff,sfp" for SFP modules + "sff,sff" for soldered down SFF modules Optional Properties: @@ -11,7 +13,8 @@ Optional Properties: interface - mod-def0-gpios : GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS) - module presence input gpio signal, active (module absent) high + module presence input gpio signal, active (module absent) high. Must + not be present for SFF modules - los-gpios : GPIO phandle and a specifier of the Receiver Loss of Signal Indication input gpio signal, active (signal lost) high @@ -24,10 +27,11 @@ Optional Properties: - rate-select0-gpios : GPIO phandle and a specifier of the Rx Signaling Rate Select (AKA RS0) output gpio signal, low: low Rx rate, high: high Rx rate + Must not be present for SFF modules - rate-select1-gpios : GPIO phandle and a specifier of the Tx Signaling Rate Select (AKA RS1) output gpio signal (SFP+ only), low: low Tx rate, high: - high Tx rate + high Tx rate. Must not be present for SFF modules Example #1: Direct serdes to SFP connection diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt new file mode 100644 index 000000000000..270ea4efff13 --- /dev/null +++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt @@ -0,0 +1,48 @@ +* Socionext AVE ethernet controller + +This describes the devicetree bindings for AVE ethernet controller +implemented on Socionext UniPhier SoCs. + +Required properties: + - compatible: Should be + - "socionext,uniphier-pro4-ave4" : for Pro4 SoC + - "socionext,uniphier-pxs2-ave4" : for PXs2 SoC + - "socionext,uniphier-ld11-ave4" : for LD11 SoC + - "socionext,uniphier-ld20-ave4" : for LD20 SoC + - reg: Address where registers are mapped and size of region. + - interrupts: Should contain the MAC interrupt. + - phy-mode: See ethernet.txt in the same directory. Allow to choose + "rgmii", "rmii", or "mii" according to the PHY. + - phy-handle: Should point to the external phy device. + See ethernet.txt file in the same directory. + - clocks: A phandle to the clock for the MAC. + +Optional properties: + - resets: A phandle to the reset control for the MAC. + - local-mac-address: See ethernet.txt in the same directory. + +Required subnode: + - mdio: A container for child nodes representing phy nodes. + See phy.txt in the same directory. + +Example: + + ether: ethernet@65000000 { + compatible = "socionext,uniphier-ld20-ave4"; + reg = <0x65000000 0x8500>; + interrupts = <0 66 4>; + phy-mode = "rgmii"; + phy-handle = <ðphy>; + clocks = <&sys_clk 6>; + resets = <&sys_rst 6>; + local-mac-address = [00 00 00 00 00 00]; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethphy@1 { + reg = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/socionext-netsec.txt b/Documentation/devicetree/bindings/net/socionext-netsec.txt new file mode 100644 index 000000000000..0cff94fb0433 --- /dev/null +++ b/Documentation/devicetree/bindings/net/socionext-netsec.txt @@ -0,0 +1,53 @@ +* Socionext NetSec Ethernet Controller IP + +Required properties: +- compatible: Should be "socionext,synquacer-netsec" +- reg: Address and length of the control register area, followed by the + address and length of the EEPROM holding the MAC address and + microengine firmware +- interrupts: Should contain ethernet controller interrupt +- clocks: phandle to the PHY reference clock +- clock-names: Should be "phy_ref_clk" +- phy-mode: See ethernet.txt file in the same directory +- phy-handle: See ethernet.txt in the same directory. + +- mdio device tree subnode: When the Netsec has a phy connected to its local + mdio, there must be device tree subnode with the following + required properties: + + - #address-cells: Must be <1>. + - #size-cells: Must be <0>. + + For each phy on the mdio bus, there must be a node with the following + fields: + - compatible: Refer to phy.txt + - reg: phy id used to communicate to phy. + +Optional properties: (See ethernet.txt file in the same directory) +- dma-coherent: Boolean property, must only be present if memory + accesses performed by the device are cache coherent. +- local-mac-address: See ethernet.txt in the same directory. +- mac-address: See ethernet.txt in the same directory. +- max-speed: See ethernet.txt in the same directory. +- max-frame-size: See ethernet.txt in the same directory. + +Example: + eth0: ethernet@522d0000 { + compatible = "socionext,synquacer-netsec"; + reg = <0 0x522d0000 0x0 0x10000>, <0 0x10000000 0x0 0x10000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_netsec>; + clock-names = "phy_ref_clk"; + phy-mode = "rgmii"; + max-speed = <1000>; + max-frame-size = <9000>; + phy-handle = <&phy1>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/ti,wilink-st.txt b/Documentation/devicetree/bindings/net/ti-bluetooth.txt index 1649c1f66b07..6d03ff8c7068 100644 --- a/Documentation/devicetree/bindings/net/ti,wilink-st.txt +++ b/Documentation/devicetree/bindings/net/ti-bluetooth.txt @@ -1,10 +1,18 @@ -TI WiLink 7/8 (wl12xx/wl18xx) Shared Transport BT/FM/GPS devices +Texas Instruments Bluetooth Chips +--------------------------------- + +This documents the binding structure and common properties for serial +attached TI Bluetooth devices. The following chips are included in this +binding: + +* TI CC256x Bluetooth devices +* TI WiLink 7/8 (wl12xx/wl18xx) Shared Transport BT/FM/GPS devices TI WiLink devices have a UART interface for providing Bluetooth, FM radio, and GPS over what's called "shared transport". The shared transport is standard BT HCI protocol with additional channels for the other functions. -These devices also have a separate WiFi interface as described in +TI WiLink devices also have a separate WiFi interface as described in wireless/ti,wlcore.txt. This bindings follows the UART slave device binding in @@ -12,6 +20,7 @@ This bindings follows the UART slave device binding in Required properties: - compatible: should be one of the following: + "ti,cc2560" "ti,wl1271-st" "ti,wl1273-st" "ti,wl1281-st" @@ -32,6 +41,9 @@ Optional properties: See ../clocks/clock-bindings.txt for details. - clock-names : Must include the following entry: "ext_clock" (External clock provided to the TI combo chip). + - nvmem-cells: phandle to nvmem data cell that contains a 6 byte BD address + with the most significant byte first (big-endian). + - nvmem-cell-names: "bd-address" (required when nvmem-cells is specified) Example: @@ -43,5 +55,7 @@ Example: enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; clocks = <&clk32k_wl18xx>; clock-names = "ext_clock"; + nvmem-cells = <&bd_address>; + nvmem-cell-names = "bd-address"; }; }; diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt new file mode 100644 index 000000000000..0c17a0ec9b7b --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt @@ -0,0 +1,32 @@ +* MediaTek mt76xx devices + +This node provides properties for configuring the MediaTek mt76xx wireless +device. The node is expected to be specified as a child node of the PCI +controller to which the wireless chip is connected. + +Optional properties: + +- mac-address: See ethernet.txt in the parent directory +- local-mac-address: See ethernet.txt in the parent directory +- ieee80211-freq-limit: See ieee80211.txt +- mediatek,mtd-eeprom: Specify a MTD partition + offset containing EEPROM data + +Optional nodes: +- led: Properties for a connected LED + Optional properties: + - led-sources: See Documentation/devicetree/bindings/leds/common.txt + +&pcie { + pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <5000000 6000000>; + mediatek,mtd-eeprom = <&factory 0x8000>; + + led { + led-sources = <2>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt index 74d7f0af209c..3d2a031217da 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt @@ -41,6 +41,9 @@ Optional properties: - qcom,msi_addr: MSI interrupt address. - qcom,msi_base: Base value to add before writing MSI data into MSI address register. +- qcom,ath10k-calibration-variant: string to search for in the board-2.bin + variant list with the same bus and device + specific ids - qcom,ath10k-calibration-data : calibration data + board specific data as an array, the length can vary between hw versions. diff --git a/Documentation/fault-injection/fault-injection.txt b/Documentation/fault-injection/fault-injection.txt index 918972babcd8..f4a32463ca48 100644 --- a/Documentation/fault-injection/fault-injection.txt +++ b/Documentation/fault-injection/fault-injection.txt @@ -30,6 +30,12 @@ o fail_mmc_request injects MMC data errors on devices permitted by setting debugfs entries under /sys/kernel/debug/mmc0/fail_mmc_request +o fail_function + + injects error return on specific functions, which are marked by + ALLOW_ERROR_INJECTION() macro, by setting debugfs entries + under /sys/kernel/debug/fail_function. No boot option supported. + Configure fault-injection capabilities behavior ----------------------------------------------- @@ -123,6 +129,29 @@ configuration of fault-injection capabilities. default is 'N', setting it to 'Y' will disable failure injections when dealing with private (address space) futexes. +- /sys/kernel/debug/fail_function/inject: + + Format: { 'function-name' | '!function-name' | '' } + specifies the target function of error injection by name. + If the function name leads '!' prefix, given function is + removed from injection list. If nothing specified ('') + injection list is cleared. + +- /sys/kernel/debug/fail_function/injectable: + + (read only) shows error injectable functions and what type of + error values can be specified. The error type will be one of + below; + - NULL: retval must be 0. + - ERRNO: retval must be -1 to -MAX_ERRNO (-4096). + - ERR_NULL: retval must be 0 or -1 to -MAX_ERRNO (-4096). + +- /sys/kernel/debug/fail_function/<functiuon-name>/retval: + + specifies the "error" return value to inject to the given + function for given function. This will be created when + user specifies new injection entry. + o Boot option In order to inject faults while debugfs is not available (early boot time), @@ -268,6 +297,45 @@ trap "echo 0 > /sys/kernel/debug/$FAILTYPE/probability" SIGINT SIGTERM EXIT echo "Injecting errors into the module $module... (interrupt to stop)" sleep 1000000 +------------------------------------------------------------------------------ + +o Inject open_ctree error while btrfs mount + +#!/bin/bash + +rm -f testfile.img +dd if=/dev/zero of=testfile.img bs=1M seek=1000 count=1 +DEVICE=$(losetup --show -f testfile.img) +mkfs.btrfs -f $DEVICE +mkdir -p tmpmnt + +FAILTYPE=fail_function +FAILFUNC=open_ctree +echo $FAILFUNC > /sys/kernel/debug/$FAILTYPE/inject +echo -12 > /sys/kernel/debug/$FAILTYPE/$FAILFUNC/retval +echo N > /sys/kernel/debug/$FAILTYPE/task-filter +echo 100 > /sys/kernel/debug/$FAILTYPE/probability +echo 0 > /sys/kernel/debug/$FAILTYPE/interval +echo -1 > /sys/kernel/debug/$FAILTYPE/times +echo 0 > /sys/kernel/debug/$FAILTYPE/space +echo 1 > /sys/kernel/debug/$FAILTYPE/verbose + +mount -t btrfs $DEVICE tmpmnt +if [ $? -ne 0 ] +then + echo "SUCCESS!" +else + echo "FAILED!" + umount tmpmnt +fi + +echo > /sys/kernel/debug/$FAILTYPE/inject + +rmdir tmpmnt +losetup -d $DEVICE +rm testfile.img + + Tool to run command with failslab or fail_page_alloc ---------------------------------------------------- In order to make it easier to accomplish the tasks mentioned above, we can use diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX index 7a79b3587dd3..f5d642c01dd3 100644 --- a/Documentation/networking/00-INDEX +++ b/Documentation/networking/00-INDEX @@ -228,6 +228,8 @@ x25.txt - general info on X.25 development. x25-iface.txt - description of the X.25 Packet Layer to LAPB device interface. +xfrm_device.txt + - description of XFRM offload API xfrm_proc.txt - description of the statistics package for XFRM. xfrm_sync.txt diff --git a/Documentation/networking/batman-adv.rst b/Documentation/networking/batman-adv.rst index a342b2cc3dc6..245fb6c0ab6f 100644 --- a/Documentation/networking/batman-adv.rst +++ b/Documentation/networking/batman-adv.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + ========== batman-adv ========== diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt index b8b40753133e..25170ad7d25b 100644 --- a/Documentation/networking/dsa/dsa.txt +++ b/Documentation/networking/dsa/dsa.txt @@ -385,11 +385,6 @@ Switch configuration avoid relying on what a previous software agent such as a bootloader/firmware may have previously configured. -- set_addr: Some switches require the programming of the management interface's - Ethernet MAC address, switch drivers can also disable ageing of MAC addresses - on the management interface and "hardcode"/"force" this MAC address for the - CPU/management interface as an optimization - PHY devices and link management ------------------------------- diff --git a/Documentation/networking/ieee802154.txt b/Documentation/networking/ieee802154.txt index 057e9fdbfac9..e74d8e1da0e2 100644 --- a/Documentation/networking/ieee802154.txt +++ b/Documentation/networking/ieee802154.txt @@ -97,6 +97,46 @@ The include/net/mac802154.h defines following functions: - void ieee802154_unregister_hw(struct ieee802154_hw *hw): freeing registered PHY + - void ieee802154_rx_irqsafe(struct ieee802154_hw *hw, struct sk_buff *skb, + u8 lqi): + telling 802.15.4 module there is a new received frame in the skb with + the RF Link Quality Indicator (LQI) from the hardware device + + - void ieee802154_xmit_complete(struct ieee802154_hw *hw, struct sk_buff *skb, + bool ifs_handling): + telling 802.15.4 module the frame in the skb is or going to be + transmitted through the hardware device + +The device driver must implement the following callbacks in the IEEE 802.15.4 +operations structure at least: +struct ieee802154_ops { + ... + int (*start)(struct ieee802154_hw *hw); + void (*stop)(struct ieee802154_hw *hw); + ... + int (*xmit_async)(struct ieee802154_hw *hw, struct sk_buff *skb); + int (*ed)(struct ieee802154_hw *hw, u8 *level); + int (*set_channel)(struct ieee802154_hw *hw, u8 page, u8 channel); + ... +}; + + - int start(struct ieee802154_hw *hw): + handler that 802.15.4 module calls for the hardware device initialization. + + - void stop(struct ieee802154_hw *hw): + handler that 802.15.4 module calls for the hardware device cleanup. + + - int xmit_async(struct ieee802154_hw *hw, struct sk_buff *skb): + handler that 802.15.4 module calls for each frame in the skb going to be + transmitted through the hardware device. + + - int ed(struct ieee802154_hw *hw, u8 *level): + handler that 802.15.4 module calls for Energy Detection from the hardware + device. + + - int set_channel(struct ieee802154_hw *hw, u8 page, u8 channel): + set radio for listening on specific channel of the hardware device. + Moreover IEEE 802.15.4 device operations structure should be filled. Fake drivers diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 46c7e1085efc..3f2c40d8e6aa 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -606,6 +606,7 @@ tcp_fastopen_blackhole_timeout_sec - INTEGER This time period will grow exponentially when more blackhole issues get detected right after Fastopen is re-enabled and will reset to initial value when the blackhole issue goes away. + 0 to disable the blackhole detection. By default, it is set to 1hr. tcp_syn_retries - INTEGER diff --git a/Documentation/networking/kapi.rst b/Documentation/networking/kapi.rst index 580289f345da..f03ae64be8bc 100644 --- a/Documentation/networking/kapi.rst +++ b/Documentation/networking/kapi.rst @@ -145,3 +145,27 @@ PHY Support .. kernel-doc:: drivers/net/phy/mdio_bus.c :internal: + +PHYLINK +------- + + PHYLINK interfaces traditional network drivers with PHYLIB, fixed-links, + and SFF modules (eg, hot-pluggable SFP) that may contain PHYs. PHYLINK + provides management of the link state and link modes. + +.. kernel-doc:: include/linux/phylink.h + :internal: + +.. kernel-doc:: drivers/net/phy/phylink.c + +SFP support +----------- + +.. kernel-doc:: drivers/net/phy/sfp-bus.c + :internal: + +.. kernel-doc:: include/linux/sfp.h + :internal: + +.. kernel-doc:: drivers/net/phy/sfp-bus.c + :export: diff --git a/Documentation/networking/netdev-features.txt b/Documentation/networking/netdev-features.txt index 7413eb05223b..c77f9d57eb91 100644 --- a/Documentation/networking/netdev-features.txt +++ b/Documentation/networking/netdev-features.txt @@ -163,3 +163,12 @@ This requests that the NIC receive all possible frames, including errored frames (such as bad FCS, etc). This can be helpful when sniffing a link with bad packets on it. Some NICs may receive more packets if also put into normal PROMISC mode. + +* rx-gro-hw + +This requests that the NIC enables Hardware GRO (generic receive offload). +Hardware GRO is basically the exact reverse of TSO, and is generally +stricter than Hardware LRO. A packet stream merged by Hardware GRO must +be re-segmentable by GSO or TSO back to the exact original packet stream. +Hardware GRO is dependent on RXCSUM since every packet successfully merged +by hardware must also have the checksum verified by hardware. diff --git a/Documentation/networking/xfrm_device.txt b/Documentation/networking/xfrm_device.txt new file mode 100644 index 000000000000..2d9d588cd34b --- /dev/null +++ b/Documentation/networking/xfrm_device.txt @@ -0,0 +1,132 @@ + +=============================================== +XFRM device - offloading the IPsec computations +=============================================== +Shannon Nelson <shannon.nelson@oracle.com> + + +Overview +======== + +IPsec is a useful feature for securing network traffic, but the +computational cost is high: a 10Gbps link can easily be brought down +to under 1Gbps, depending on the traffic and link configuration. +Luckily, there are NICs that offer a hardware based IPsec offload which +can radically increase throughput and decrease CPU utilization. The XFRM +Device interface allows NIC drivers to offer to the stack access to the +hardware offload. + +Userland access to the offload is typically through a system such as +libreswan or KAME/raccoon, but the iproute2 'ip xfrm' command set can +be handy when experimenting. An example command might look something +like this: + + ip x s add proto esp dst 14.0.0.70 src 14.0.0.52 spi 0x07 mode transport \ + reqid 0x07 replay-window 32 \ + aead 'rfc4106(gcm(aes))' 0x44434241343332312423222114131211f4f3f2f1 128 \ + sel src 14.0.0.52/24 dst 14.0.0.70/24 proto tcp \ + offload dev eth4 dir in + +Yes, that's ugly, but that's what shell scripts and/or libreswan are for. + + + +Callbacks to implement +====================== + +/* from include/linux/netdevice.h */ +struct xfrmdev_ops { + int (*xdo_dev_state_add) (struct xfrm_state *x); + void (*xdo_dev_state_delete) (struct xfrm_state *x); + void (*xdo_dev_state_free) (struct xfrm_state *x); + bool (*xdo_dev_offload_ok) (struct sk_buff *skb, + struct xfrm_state *x); +}; + +The NIC driver offering ipsec offload will need to implement these +callbacks to make the offload available to the network stack's +XFRM subsytem. Additionally, the feature bits NETIF_F_HW_ESP and +NETIF_F_HW_ESP_TX_CSUM will signal the availability of the offload. + + + +Flow +==== + +At probe time and before the call to register_netdev(), the driver should +set up local data structures and XFRM callbacks, and set the feature bits. +The XFRM code's listener will finish the setup on NETDEV_REGISTER. + + adapter->netdev->xfrmdev_ops = &ixgbe_xfrmdev_ops; + adapter->netdev->features |= NETIF_F_HW_ESP; + adapter->netdev->hw_enc_features |= NETIF_F_HW_ESP; + +When new SAs are set up with a request for "offload" feature, the +driver's xdo_dev_state_add() will be given the new SA to be offloaded +and an indication of whether it is for Rx or Tx. The driver should + - verify the algorithm is supported for offloads + - store the SA information (key, salt, target-ip, protocol, etc) + - enable the HW offload of the SA + +The driver can also set an offload_handle in the SA, an opaque void pointer +that can be used to convey context into the fast-path offload requests. + + xs->xso.offload_handle = context; + + +When the network stack is preparing an IPsec packet for an SA that has +been setup for offload, it first calls into xdo_dev_offload_ok() with +the skb and the intended offload state to ask the driver if the offload +will serviceable. This can check the packet information to be sure the +offload can be supported (e.g. IPv4 or IPv6, no IPv4 options, etc) and +return true of false to signify its support. + +When ready to send, the driver needs to inspect the Tx packet for the +offload information, including the opaque context, and set up the packet +send accordingly. + + xs = xfrm_input_state(skb); + context = xs->xso.offload_handle; + set up HW for send + +The stack has already inserted the appropriate IPsec headers in the +packet data, the offload just needs to do the encryption and fix up the +header values. + + +When a packet is received and the HW has indicated that it offloaded a +decryption, the driver needs to add a reference to the decoded SA into +the packet's skb. At this point the data should be decrypted but the +IPsec headers are still in the packet data; they are removed later up +the stack in xfrm_input(). + + find and hold the SA that was used to the Rx skb + get spi, protocol, and destination IP from packet headers + xs = find xs from (spi, protocol, dest_IP) + xfrm_state_hold(xs); + + store the state information into the skb + skb->sp = secpath_dup(skb->sp); + skb->sp->xvec[skb->sp->len++] = xs; + skb->sp->olen++; + + indicate the success and/or error status of the offload + xo = xfrm_offload(skb); + xo->flags = CRYPTO_DONE; + xo->status = crypto_status; + + hand the packet to napi_gro_receive() as usual + + +When the SA is removed by the user, the driver's xdo_dev_state_delete() +is asked to disable the offload. Later, xdo_dev_state_free() is called +from a garbage collection routine after all reference counts to the state +have been removed and any remaining resources can be cleared for the +offload state. How these are used by the driver will depend on specific +hardware needs. + +As a netdev is set to DOWN the XFRM stack's netdev listener will call +xdo_dev_state_delete() and xdo_dev_state_free() on any remaining offloaded +states. + + diff --git a/Documentation/networking/xfrm_proc.txt b/Documentation/networking/xfrm_proc.txt index d0d8bafa9016..2eae619ab67b 100644 --- a/Documentation/networking/xfrm_proc.txt +++ b/Documentation/networking/xfrm_proc.txt @@ -5,13 +5,15 @@ Masahide NAKAMURA <nakam@linux-ipv6.org> Transformation Statistics ------------------------- -xfrm_proc is a statistics shown factor dropped by transformation -for developer. -It is a counter designed from current transformation source code -and defined like linux private MIB. -Inbound statistics -~~~~~~~~~~~~~~~~~~ +The xfrm_proc code is a set of statistics showing numbers of packets +dropped by the transformation code and why. These counters are defined +as part of the linux private MIB. These counters can be viewed in +/proc/net/xfrm_stat. + + +Inbound errors +~~~~~~~~~~~~~~ XfrmInError: All errors which is not matched others XfrmInBufferError: @@ -46,6 +48,10 @@ XfrmInPolBlock: Policy discards XfrmInPolError: Policy error +XfrmAcquireError: + State hasn't been fully acquired before use +XfrmFwdHdrError: + Forward routing of a packet is not allowed Outbound errors ~~~~~~~~~~~~~~~ @@ -72,3 +78,5 @@ XfrmOutPolDead: Policy is dead XfrmOutPolError: Policy error +XfrmOutStateInvalid: + State is invalid, perhaps expired diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt index b67044a2575f..35c62f522754 100644 --- a/Documentation/sysctl/net.txt +++ b/Documentation/sysctl/net.txt @@ -95,7 +95,9 @@ dev_weight -------------- The maximum number of packets that kernel can handle on a NAPI interrupt, -it's a Per-CPU variable. +it's a Per-CPU variable. For drivers that support LRO or GRO_HW, a hardware +aggregated packet is counted as one packet in this context. + Default: 64 dev_weight_rx_bias diff --git a/MAINTAINERS b/MAINTAINERS index e3581413420c..7ec1b088c07f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1327,8 +1327,10 @@ T: git git://github.com/ulli-kroll/linux.git S: Maintained F: Documentation/devicetree/bindings/arm/gemini.txt F: Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt +F: Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt F: Documentation/devicetree/bindings/rtc/faraday,ftrtc010.txt F: arch/arm/mach-gemini/ +F: drivers/net/ethernet/cortina/gemini/* F: drivers/pinctrl/pinctrl-gemini.c F: drivers/rtc/rtc-ftrtc010.c @@ -2564,6 +2566,7 @@ S: Maintained F: Documentation/ABI/testing/sysfs-class-net-batman-adv F: Documentation/ABI/testing/sysfs-class-net-mesh F: Documentation/networking/batman-adv.rst +F: include/uapi/linux/batadv_packet.h F: include/uapi/linux/batman_adv.h F: net/batman-adv/ @@ -2687,7 +2690,6 @@ F: drivers/mtd/devices/block2mtd.c BLUETOOTH DRIVERS M: Marcel Holtmann <marcel@holtmann.org> -M: Gustavo Padovan <gustavo@padovan.org> M: Johan Hedberg <johan.hedberg@gmail.com> L: linux-bluetooth@vger.kernel.org W: http://www.bluez.org/ @@ -2698,7 +2700,6 @@ F: drivers/bluetooth/ BLUETOOTH SUBSYSTEM M: Marcel Holtmann <marcel@holtmann.org> -M: Gustavo Padovan <gustavo@padovan.org> M: Johan Hedberg <johan.hedberg@gmail.com> L: linux-bluetooth@vger.kernel.org W: http://www.bluez.org/ @@ -2723,12 +2724,16 @@ M: Alexei Starovoitov <ast@kernel.org> M: Daniel Borkmann <daniel@iogearbox.net> L: netdev@vger.kernel.org L: linux-kernel@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git S: Supported F: arch/x86/net/bpf_jit* F: Documentation/networking/filter.txt F: Documentation/bpf/ F: include/linux/bpf* F: include/linux/filter.h +F: include/trace/events/bpf.h +F: include/trace/events/xdp.h F: include/uapi/linux/bpf* F: include/uapi/linux/filter.h F: kernel/bpf/ @@ -4939,6 +4944,11 @@ S: Maintained F: lib/dynamic_debug.c F: include/linux/dynamic_debug.h +DYNAMIC INTERRUPT MODERATION +M: Tal Gilboa <talgi@mellanox.com> +S: Maintained +F: include/linux/net_dim.h + DZ DECSTATION DZ11 SERIAL DRIVER M: "Maciej W. Rozycki" <macro@linux-mips.org> S: Maintained @@ -8721,6 +8731,13 @@ L: netdev@vger.kernel.org S: Maintained F: drivers/net/ethernet/mediatek/ +MEDIATEK SWITCH DRIVER +M: Sean Wang <sean.wang@mediatek.com> +L: netdev@vger.kernel.org +S: Maintained +F: drivers/net/dsa/mt7530.* +F: net/dsa/tag_mtk.c + MEDIATEK JPEG DRIVER M: Rick Chang <rick.chang@mediatek.com> M: Bin Liu <bin.liu@mediatek.com> @@ -9598,6 +9615,11 @@ NETWORKING [WIRELESS] L: linux-wireless@vger.kernel.org Q: http://patchwork.kernel.org/project/linux-wireless/list/ +NETDEVSIM +M: Jakub Kicinski <jakub.kicinski@netronome.com> +S: Maintained +F: drivers/net/netdevsim/* + NETXEN (1/10) GbE SUPPORT M: Manish Chopra <manish.chopra@cavium.com> M: Rahul Verma <rahul.verma@cavium.com> @@ -11759,15 +11781,13 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.g S: Maintained F: drivers/net/wireless/realtek/rtl818x/rtl8187/ -RTL8192CE WIRELESS DRIVER -M: Larry Finger <Larry.Finger@lwfinger.net> -M: Chaoming Li <chaoming_li@realsil.com.cn> +REALTEK WIRELESS DRIVER (rtlwifi family) +M: Ping-Ke Shih <pkshih@realtek.com> L: linux-wireless@vger.kernel.org W: http://wireless.kernel.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git S: Maintained F: drivers/net/wireless/realtek/rtlwifi/ -F: drivers/net/wireless/realtek/rtlwifi/rtl8192ce/ RTL8XXXU WIRELESS DRIVER (rtl8xxxu) M: Jes Sorensen <Jes.Sorensen@gmail.com> @@ -12628,6 +12648,13 @@ F: drivers/md/raid* F: include/linux/raid/ F: include/uapi/linux/raid/ +SOCIONEXT (SNI) NETSEC NETWORK DRIVER +M: Jassi Brar <jaswinder.singh@linaro.org> +L: netdev@vger.kernel.org +S: Maintained +F: drivers/net/ethernet/socionext/netsec.c +F: Documentation/devicetree/bindings/net/socionext-netsec.txt + SONIC NETWORK DRIVER M: Thomas Bogendoerfer <tsbogend@alpha.franken.de> L: netdev@vger.kernel.org @@ -14745,9 +14772,9 @@ S: Maintained F: drivers/hid/hid-wiimote* WILOCITY WIL6210 WIRELESS DRIVER -M: Maya Erez <qca_merez@qca.qualcomm.com> +M: Maya Erez <merez@codeaurora.org> L: linux-wireless@vger.kernel.org -L: wil6210@qca.qualcomm.com +L: wil6210@qti.qualcomm.com S: Supported W: http://wireless.kernel.org/en/users/Drivers/wil6210 F: drivers/net/wireless/ath/wil6210/ diff --git a/arch/Kconfig b/arch/Kconfig index 400b9e1b2f27..97376accfb14 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -196,6 +196,9 @@ config HAVE_OPTPROBES config HAVE_KPROBES_ON_FTRACE bool +config HAVE_FUNCTION_ERROR_INJECTION + bool + config HAVE_NMI bool diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 09ce8b81fafa..fcaff1c66bcb 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -122,7 +122,7 @@ }; can1: can@43f88000 { - compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan"; + compatible = "fsl,imx25-flexcan"; reg = <0x43f88000 0x4000>; interrupts = <43>; clocks = <&clks 75>, <&clks 75>; @@ -131,7 +131,7 @@ }; can2: can@43f8c000 { - compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan"; + compatible = "fsl,imx25-flexcan"; reg = <0x43f8c000 0x4000>; interrupts = <44>; clocks = <&clks 76>, <&clks 76>; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 2f4ebe0318d3..e52e05c0fe56 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -1038,7 +1038,7 @@ }; can0: can@80032000 { - compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; + compatible = "fsl,imx28-flexcan"; reg = <0x80032000 0x2000>; interrupts = <8>; clocks = <&clks 58>, <&clks 58>; @@ -1047,7 +1047,7 @@ }; can1: can@80034000 { - compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; + compatible = "fsl,imx28-flexcan"; reg = <0x80034000 0x2000>; interrupts = <9>; clocks = <&clks 59>, <&clks 59>; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 6d5e6a60bee7..1f0e2203b576 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -303,7 +303,7 @@ }; can1: can@53fe4000 { - compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan"; + compatible = "fsl,imx35-flexcan"; reg = <0x53fe4000 0x1000>; clocks = <&clks 33>, <&clks 33>; clock-names = "ipg", "per"; @@ -312,7 +312,7 @@ }; can2: can@53fe8000 { - compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan"; + compatible = "fsl,imx35-flexcan"; reg = <0x53fe8000 0x1000>; clocks = <&clks 34>, <&clks 34>; clock-names = "ipg", "per"; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 84f17f7abb71..85071ff8c639 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -536,7 +536,7 @@ }; can1: can@53fc8000 { - compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; + compatible = "fsl,imx53-flexcan"; reg = <0x53fc8000 0x4000>; interrupts = <82>; clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, @@ -546,7 +546,7 @@ }; can2: can@53fcc000 { - compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; + compatible = "fsl,imx53-flexcan"; reg = <0x53fcc000 0x4000>; interrupts = <83>; clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>, diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts index 67b4de0e3439..7bb402d3e9d0 100644 --- a/arch/arm/boot/dts/ls1021a-qds.dts +++ b/arch/arm/boot/dts/ls1021a-qds.dts @@ -331,3 +331,19 @@ &uart1 { status = "okay"; }; + +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "disabled"; +}; + +&can3 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts index 44715c8ef756..860b898141f0 100644 --- a/arch/arm/boot/dts/ls1021a-twr.dts +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -243,3 +243,19 @@ &uart1 { status = "okay"; }; + +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "disabled"; +}; + +&can3 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 9319e1f0f1d8..7789031898b0 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -730,5 +730,41 @@ <0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; }; + + can0: can@2a70000 { + compatible = "fsl,ls1021ar2-flexcan"; + reg = <0x0 0x2a70000 0x0 0x1000>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "ipg", "per"; + big-endian; + }; + + can1: can@2a80000 { + compatible = "fsl,ls1021ar2-flexcan"; + reg = <0x0 0x2a80000 0x0 0x1000>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "ipg", "per"; + big-endian; + }; + + can2: can@2a90000 { + compatible = "fsl,ls1021ar2-flexcan"; + reg = <0x0 0x2a90000 0x0 0x1000>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "ipg", "per"; + big-endian; + }; + + can3: can@2aa0000 { + compatible = "fsl,ls1021ar2-flexcan"; + reg = <0x0 0x2aa0000 0x0 0x1000>; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "ipg", "per"; + big-endian; + }; }; }; diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index 323a4df59a6c..41e2feb0cf4f 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -25,8 +25,6 @@ #include "bpf_jit_32.h" -int bpf_jit_enable __read_mostly; - /* * eBPF prog stack layout: * @@ -1821,7 +1819,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) /* If BPF JIT was not enabled then we must fall back to * the interpreter. */ - if (!bpf_jit_enable) + if (!prog->jit_requested) return orig_prog; /* If constant blinding was enabled and we failed during blinding diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c index bb32f7f6dd0f..0775d5ab8ee9 100644 --- a/arch/arm64/net/bpf_jit_comp.c +++ b/arch/arm64/net/bpf_jit_comp.c @@ -31,8 +31,6 @@ #include "bpf_jit.h" -int bpf_jit_enable __read_mostly; - #define TMP_REG_1 (MAX_BPF_JIT_REG + 0) #define TMP_REG_2 (MAX_BPF_JIT_REG + 1) #define TCALL_CNT (MAX_BPF_JIT_REG + 2) @@ -99,6 +97,20 @@ static inline void emit_a64_mov_i64(const int reg, const u64 val, } } +static inline void emit_addr_mov_i64(const int reg, const u64 val, + struct jit_ctx *ctx) +{ + u64 tmp = val; + int shift = 0; + + emit(A64_MOVZ(1, reg, tmp & 0xffff, shift), ctx); + for (;shift < 48;) { + tmp >>= 16; + shift += 16; + emit(A64_MOVK(1, reg, tmp & 0xffff, shift), ctx); + } +} + static inline void emit_a64_mov_i(const int is64, const int reg, const s32 val, struct jit_ctx *ctx) { @@ -605,7 +617,10 @@ emit_cond_jmp: const u8 r0 = bpf2a64[BPF_REG_0]; const u64 func = (u64)__bpf_call_base + imm; - emit_a64_mov_i64(tmp, func, ctx); + if (ctx->prog->is_func) + emit_addr_mov_i64(tmp, func, ctx); + else + emit_a64_mov_i64(tmp, func, ctx); emit(A64_BLR(tmp), ctx); emit(A64_MOV(1, r0, A64_R(0)), ctx); break; @@ -837,16 +852,24 @@ static inline void bpf_flush_icache(void *start, void *end) flush_icache_range((unsigned long)start, (unsigned long)end); } +struct arm64_jit_data { + struct bpf_binary_header *header; + u8 *image; + struct jit_ctx ctx; +}; + struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) { struct bpf_prog *tmp, *orig_prog = prog; struct bpf_binary_header *header; + struct arm64_jit_data *jit_data; bool tmp_blinded = false; + bool extra_pass = false; struct jit_ctx ctx; int image_size; u8 *image_ptr; - if (!bpf_jit_enable) + if (!prog->jit_requested) return orig_prog; tmp = bpf_jit_blind_constants(prog); @@ -860,13 +883,30 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) prog = tmp; } + jit_data = prog->aux->jit_data; + if (!jit_data) { + jit_data = kzalloc(sizeof(*jit_data), GFP_KERNEL); + if (!jit_data) { + prog = orig_prog; + goto out; + } + prog->aux->jit_data = jit_data; + } + if (jit_data->ctx.offset) { + ctx = jit_data->ctx; + image_ptr = jit_data->image; + header = jit_data->header; + extra_pass = true; + image_size = sizeof(u32) * ctx.idx; + goto skip_init_ctx; + } memset(&ctx, 0, sizeof(ctx)); ctx.prog = prog; ctx.offset = kcalloc(prog->len, sizeof(int), GFP_KERNEL); if (ctx.offset == NULL) { prog = orig_prog; - goto out; + goto out_off; } /* 1. Initial fake pass to compute ctx->idx. */ @@ -897,6 +937,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) /* 2. Now, the actual pass. */ ctx.image = (__le32 *)image_ptr; +skip_init_ctx: ctx.idx = 0; build_prologue(&ctx); @@ -922,13 +963,31 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) bpf_flush_icache(header, ctx.image + ctx.idx); - bpf_jit_binary_lock_ro(header); + if (!prog->is_func || extra_pass) { + if (extra_pass && ctx.idx != jit_data->ctx.idx) { + pr_err_once("multi-func JIT bug %d != %d\n", + ctx.idx, jit_data->ctx.idx); + bpf_jit_binary_free(header); + prog->bpf_func = NULL; + prog->jited = 0; + goto out_off; + } + bpf_jit_binary_lock_ro(header); + } else { + jit_data->ctx = ctx; + jit_data->image = image_ptr; + jit_data->header = header; + } prog->bpf_func = (void *)ctx.image; prog->jited = 1; prog->jited_len = image_size; + if (!prog->is_func || extra_pass) { out_off: - kfree(ctx.offset); + kfree(ctx.offset); + kfree(jit_data); + prog->aux->jit_data = NULL; + } out: if (tmp_blinded) bpf_jit_prog_release_other(prog, prog == orig_prog ? diff --git a/arch/mips/bcm63xx/dev-enet.c b/arch/mips/bcm63xx/dev-enet.c index e8284771d620..07b4c65a88a4 100644 --- a/arch/mips/bcm63xx/dev-enet.c +++ b/arch/mips/bcm63xx/dev-enet.c @@ -265,6 +265,14 @@ int __init bcm63xx_enet_register(int unit, dpd->dma_chan_width = ENETDMA_CHAN_WIDTH; } + if (unit == 0) { + dpd->rx_chan = 0; + dpd->tx_chan = 1; + } else { + dpd->rx_chan = 2; + dpd->tx_chan = 3; + } + ret = platform_device_register(pdev); if (ret) return ret; diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h index c0bd47444cff..da39e4d326ba 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h @@ -55,6 +55,10 @@ struct bcm63xx_enet_platform_data { /* DMA descriptor shift */ unsigned int dma_desc_shift; + + /* dma channel ids */ + int rx_chan; + int tx_chan; }; /* diff --git a/arch/mips/net/bpf_jit.c b/arch/mips/net/bpf_jit.c index 44b925005dd3..4d8cb9bb8365 100644 --- a/arch/mips/net/bpf_jit.c +++ b/arch/mips/net/bpf_jit.c @@ -1207,8 +1207,6 @@ jmp_cmp: return 0; } -int bpf_jit_enable __read_mostly; - void bpf_jit_compile(struct bpf_prog *fp) { struct jit_ctx ctx; diff --git a/arch/mips/net/ebpf_jit.c b/arch/mips/net/ebpf_jit.c index 962b0259b4b6..4e347030ed2c 100644 --- a/arch/mips/net/ebpf_jit.c +++ b/arch/mips/net/ebpf_jit.c @@ -177,8 +177,6 @@ static u32 b_imm(unsigned int tgt, struct jit_ctx *ctx) (ctx->idx * 4) - 4; } -int bpf_jit_enable __read_mostly; - enum which_ebpf_reg { src_reg, src_reg_no_fp, @@ -1869,7 +1867,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) unsigned int image_size; u8 *image_ptr; - if (!bpf_jit_enable || !cpu_has_mips64r2) + if (!prog->jit_requested || !cpu_has_mips64r2) return prog; tmp = bpf_jit_blind_constants(prog); diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi index af12ead88c5f..1b4aafc1f6a2 100644 --- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi @@ -137,12 +137,14 @@ compatible = "fsl,p1010-flexcan"; reg = <0x1c000 0x1000>; interrupts = <48 0x2 0 0>; + big-endian; }; can1: can@1d000 { compatible = "fsl,p1010-flexcan"; reg = <0x1d000 0x1000>; interrupts = <61 0x2 0 0>; + big-endian; }; L2: l2-cache-controller@20000 { diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c index f9941b3b5770..872d1f6dd11e 100644 --- a/arch/powerpc/net/bpf_jit_comp.c +++ b/arch/powerpc/net/bpf_jit_comp.c @@ -18,8 +18,6 @@ #include "bpf_jit32.h" -int bpf_jit_enable __read_mostly; - static inline void bpf_flush_icache(void *start, void *end) { smp_wmb(); diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_jit_comp64.c index d183b4801bdb..217a78e84865 100644 --- a/arch/powerpc/net/bpf_jit_comp64.c +++ b/arch/powerpc/net/bpf_jit_comp64.c @@ -21,8 +21,6 @@ #include "bpf_jit64.h" -int bpf_jit_enable __read_mostly; - static void bpf_jit_fill_ill_insns(void *area, unsigned int size) { memset32(area, BREAKPOINT_INSTRUCTION, size/4); @@ -995,7 +993,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp) struct bpf_prog *tmp_fp; bool bpf_blinded = false; - if (!bpf_jit_enable) + if (!fp->jit_requested) return org_fp; tmp_fp = bpf_jit_blind_constants(org_fp); diff --git a/arch/s390/include/asm/diag.h b/arch/s390/include/asm/diag.h index 6db78567294c..cdbaad50c7c7 100644 --- a/arch/s390/include/asm/diag.h +++ b/arch/s390/include/asm/diag.h @@ -229,13 +229,55 @@ struct diag204_x_phys_block { } __packed; enum diag26c_sc { + DIAG26C_PORT_VNIC = 0x00000024, DIAG26C_MAC_SERVICES = 0x00000030 }; enum diag26c_version { - DIAG26C_VERSION2 = 0x00000002 /* z/VM 5.4.0 */ + DIAG26C_VERSION2 = 0x00000002, /* z/VM 5.4.0 */ + DIAG26C_VERSION6_VM65918 = 0x00020006 /* z/VM 6.4.0 + VM65918 */ }; +#define DIAG26C_VNIC_INFO 0x0002 +struct diag26c_vnic_req { + u32 resp_buf_len; + u32 resp_version; + u16 req_format; + u16 vlan_id; + u64 sys_name; + u8 res[2]; + u16 devno; +} __packed __aligned(8); + +#define VNIC_INFO_PROT_L3 1 +#define VNIC_INFO_PROT_L2 2 +/* Note: this is the bare minimum, use it for uninitialized VNICs only. */ +struct diag26c_vnic_resp { + u32 version; + u32 entry_cnt; + /* VNIC info: */ + u32 next_entry; + u64 owner; + u16 devno; + u8 status; + u8 type; + u64 lan_owner; + u64 lan_name; + u64 port_name; + u8 port_type; + u8 ext_status:6; + u8 protocol:2; + u16 base_devno; + u32 port_num; + u32 ifindex; + u32 maxinfo; + u32 dev_count; + /* 3x device info: */ + u8 dev_info1[28]; + u8 dev_info2[28]; + u8 dev_info3[28]; +} __packed __aligned(8); + #define DIAG26C_GET_MAC 0x0000 struct diag26c_mac_req { u32 resp_buf_len; diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c index 9557d8b516df..e50188773ff3 100644 --- a/arch/s390/net/bpf_jit_comp.c +++ b/arch/s390/net/bpf_jit_comp.c @@ -28,8 +28,6 @@ #include <asm/set_memory.h> #include "bpf_jit.h" -int bpf_jit_enable __read_mostly; - struct bpf_jit { u32 seen; /* Flags to remember seen eBPF instructions */ u32 seen_reg[16]; /* Array to remember which registers are used */ @@ -1299,7 +1297,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp) struct bpf_jit jit; int pass; - if (!bpf_jit_enable) + if (!fp->jit_requested) return orig_fp; tmp = bpf_jit_blind_constants(fp); diff --git a/arch/sh/boards/board-espt.c b/arch/sh/boards/board-espt.c index 7291e2f11a47..4d6be53058d6 100644 --- a/arch/sh/boards/board-espt.c +++ b/arch/sh/boards/board-espt.c @@ -79,7 +79,6 @@ static struct resource sh_eth_resources[] = { static struct sh_eth_plat_data sh7763_eth_pdata = { .phy = 0, - .edmac_endian = EDMAC_LITTLE_ENDIAN, .phy_interface = PHY_INTERFACE_MODE_MII, }; diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c index 0104c8199c48..1bde08dc067d 100644 --- a/arch/sh/boards/board-sh7757lcr.c +++ b/arch/sh/boards/board-sh7757lcr.c @@ -76,7 +76,6 @@ static struct resource sh_eth0_resources[] = { static struct sh_eth_plat_data sh7757_eth0_pdata = { .phy = 1, - .edmac_endian = EDMAC_LITTLE_ENDIAN, .set_mdio_gate = sh7757_eth_set_mdio_gate, }; @@ -104,7 +103,6 @@ static struct resource sh_eth1_resources[] = { static struct sh_eth_plat_data sh7757_eth1_pdata = { .phy = 1, - .edmac_endian = EDMAC_LITTLE_ENDIAN, .set_mdio_gate = sh7757_eth_set_mdio_gate, }; @@ -148,7 +146,6 @@ static struct resource sh_eth_giga0_resources[] = { static struct sh_eth_plat_data sh7757_eth_giga0_pdata = { .phy = 18, - .edmac_endian = EDMAC_LITTLE_ENDIAN, .set_mdio_gate = sh7757_eth_giga_set_mdio_gate, .phy_interface = PHY_INTERFACE_MODE_RGMII_ID, }; @@ -182,7 +179,6 @@ static struct resource sh_eth_giga1_resources[] = { static struct sh_eth_plat_data sh7757_eth_giga1_pdata = { .phy = 19, - .edmac_endian = EDMAC_LITTLE_ENDIAN, .set_mdio_gate = sh7757_eth_giga_set_mdio_gate, .phy_interface = PHY_INTERFACE_MODE_RGMII_ID, }; diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 1faf6cb93dcb..6f929abe0b50 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -159,7 +159,6 @@ static struct resource sh_eth_resources[] = { static struct sh_eth_plat_data sh_eth_plat = { .phy = 0x1f, /* SMSC LAN8700 */ - .edmac_endian = EDMAC_LITTLE_ENDIAN, .phy_interface = PHY_INTERFACE_MODE_MII, .ether_link_active_low = 1 }; diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index f1fecd395679..255952555656 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -374,7 +374,6 @@ static struct resource sh_eth_resources[] = { static struct sh_eth_plat_data sh_eth_plat = { .phy = 0x1f, /* SMSC LAN8187 */ - .edmac_endian = EDMAC_LITTLE_ENDIAN, .phy_interface = PHY_INTERFACE_MODE_MII, }; diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c index 2c8fb04685d4..6e62686b81b1 100644 --- a/arch/sh/boards/mach-sh7763rdp/setup.c +++ b/arch/sh/boards/mach-sh7763rdp/setup.c @@ -87,7 +87,6 @@ static struct resource sh_eth_resources[] = { static struct sh_eth_plat_data sh7763_eth_pdata = { .phy = 1, - .edmac_endian = EDMAC_LITTLE_ENDIAN, .phy_interface = PHY_INTERFACE_MODE_MII, }; diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c index 95796ad00fbe..d08db08dec38 100644 --- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -122,7 +122,6 @@ static struct platform_device scif2_device = { static struct sh_eth_plat_data eth_platform_data = { .phy = 1, - .edmac_endian = EDMAC_LITTLE_ENDIAN, .phy_interface = PHY_INTERFACE_MODE_MII, }; diff --git a/arch/sparc/net/bpf_jit_comp_32.c b/arch/sparc/net/bpf_jit_comp_32.c index 09e318eb34ee..3bd8ca95e521 100644 --- a/arch/sparc/net/bpf_jit_comp_32.c +++ b/arch/sparc/net/bpf_jit_comp_32.c @@ -11,8 +11,6 @@ #include "bpf_jit_32.h" -int bpf_jit_enable __read_mostly; - static inline bool is_simm13(unsigned int value) { return value + 0x1000 < 0x2000; diff --git a/arch/sparc/net/bpf_jit_comp_64.c b/arch/sparc/net/bpf_jit_comp_64.c index ff5f9cb3039a..50a24d7bd4c5 100644 --- a/arch/sparc/net/bpf_jit_comp_64.c +++ b/arch/sparc/net/bpf_jit_comp_64.c @@ -12,8 +12,6 @@ #include "bpf_jit_64.h" -int bpf_jit_enable __read_mostly; - static inline bool is_simm13(unsigned int value) { return value + 0x1000 < 0x2000; @@ -1509,17 +1507,25 @@ static void jit_fill_hole(void *area, unsigned int size) *ptr++ = 0x91d02005; /* ta 5 */ } +struct sparc64_jit_data { + struct bpf_binary_header *header; + u8 *image; + struct jit_ctx ctx; +}; + struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) { struct bpf_prog *tmp, *orig_prog = prog; + struct sparc64_jit_data *jit_data; struct bpf_binary_header *header; bool tmp_blinded = false; + bool extra_pass = false; struct jit_ctx ctx; u32 image_size; u8 *image_ptr; int pass; - if (!bpf_jit_enable) + if (!prog->jit_requested) return orig_prog; tmp = bpf_jit_blind_constants(prog); @@ -1533,13 +1539,31 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) prog = tmp; } + jit_data = prog->aux->jit_data; + if (!jit_data) { + jit_data = kzalloc(sizeof(*jit_data), GFP_KERNEL); + if (!jit_data) { + prog = orig_prog; + goto out; + } + prog->aux->jit_data = jit_data; + } + if (jit_data->ctx.offset) { + ctx = jit_data->ctx; + image_ptr = jit_data->image; + header = jit_data->header; + extra_pass = true; + image_size = sizeof(u32) * ctx.idx; + goto skip_init_ctx; + } + memset(&ctx, 0, sizeof(ctx)); ctx.prog = prog; ctx.offset = kcalloc(prog->len, sizeof(unsigned int), GFP_KERNEL); if (ctx.offset == NULL) { prog = orig_prog; - goto out; + goto out_off; } /* Fake pass to detect features used, and get an accurate assessment @@ -1562,7 +1586,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) } ctx.image = (u32 *)image_ptr; - +skip_init_ctx: for (pass = 1; pass < 3; pass++) { ctx.idx = 0; @@ -1593,14 +1617,24 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) bpf_flush_icache(header, (u8 *)header + (header->pages * PAGE_SIZE)); - bpf_jit_binary_lock_ro(header); + if (!prog->is_func || extra_pass) { + bpf_jit_binary_lock_ro(header); + } else { + jit_data->ctx = ctx; + jit_data->image = image_ptr; + jit_data->header = header; + } prog->bpf_func = (void *)ctx.image; prog->jited = 1; prog->jited_len = image_size; + if (!prog->is_func || extra_pass) { out_off: - kfree(ctx.offset); + kfree(ctx.offset); + kfree(jit_data); + prog->aux->jit_data = NULL; + } out: if (tmp_blinded) bpf_jit_prog_release_other(prog, prog == orig_prog ? diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 20da391b5f32..bc2204f829d3 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -154,6 +154,7 @@ config X86 select HAVE_KERNEL_XZ select HAVE_KPROBES select HAVE_KPROBES_ON_FTRACE + select HAVE_FUNCTION_ERROR_INJECTION select HAVE_KRETPROBES select HAVE_KVM select HAVE_LIVEPATCH if X86_64 diff --git a/arch/x86/include/asm/error-injection.h b/arch/x86/include/asm/error-injection.h new file mode 100644 index 000000000000..47b7a1296245 --- /dev/null +++ b/arch/x86/include/asm/error-injection.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_ERROR_INJECTION_H +#define _ASM_ERROR_INJECTION_H + +#include <linux/compiler.h> +#include <linux/linkage.h> +#include <asm/ptrace.h> +#include <asm-generic/error-injection.h> + +asmlinkage void just_return_func(void); +void override_function_with_return(struct pt_regs *regs); + +#endif /* _ASM_ERROR_INJECTION_H */ diff --git a/arch/x86/include/asm/kprobes.h b/arch/x86/include/asm/kprobes.h index 9f2e3102e0bb..367d99cff426 100644 --- a/arch/x86/include/asm/kprobes.h +++ b/arch/x86/include/asm/kprobes.h @@ -67,6 +67,8 @@ extern const int kretprobe_blacklist_size; void arch_remove_kprobe(struct kprobe *p); asmlinkage void kretprobe_trampoline(void); +extern void arch_kprobe_override_function(struct pt_regs *regs); + /* Architecture specific copy of original instruction*/ struct arch_specific_insn { /* copy of the original instruction */ diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h index 14131dd06b29..6de1fd3d0097 100644 --- a/arch/x86/include/asm/ptrace.h +++ b/arch/x86/include/asm/ptrace.h @@ -109,6 +109,11 @@ static inline unsigned long regs_return_value(struct pt_regs *regs) return regs->ax; } +static inline void regs_set_return_value(struct pt_regs *regs, unsigned long rc) +{ + regs->ax = rc; +} + /* * user_mode(regs) determines whether a register set came from user * mode. On x86_32, this is true if V8086 mode was enabled OR if the diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index f23934bbaf4e..25a972c61b0a 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -26,6 +26,7 @@ lib-y += memcpy_$(BITS).o lib-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += rwsem.o lib-$(CONFIG_INSTRUCTION_DECODER) += insn.o inat.o insn-eval.o lib-$(CONFIG_RANDOMIZE_BASE) += kaslr.o +lib-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o lib-$(CONFIG_RETPOLINE) += retpoline.o obj-y += msr.o msr-reg.o msr-reg-export.o hweight.o diff --git a/arch/x86/lib/error-inject.c b/arch/x86/lib/error-inject.c new file mode 100644 index 000000000000..7b881d03d0dd --- /dev/null +++ b/arch/x86/lib/error-inject.c @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/error-injection.h> +#include <linux/kprobes.h> + +asmlinkage void just_return_func(void); + +asm( + ".type just_return_func, @function\n" + "just_return_func:\n" + " ret\n" + ".size just_return_func, .-just_return_func\n" +); + +void override_function_with_return(struct pt_regs *regs) +{ + regs->ip = (unsigned long)&just_return_func; +} +NOKPROBE_SYMBOL(override_function_with_return); diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c index 0554e8aef4d5..5acee5139e28 100644 --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -15,8 +15,6 @@ #include <asm/set_memory.h> #include <linux/bpf.h> -int bpf_jit_enable __read_mostly; - /* * assembly code in arch/x86/net/bpf_jit.S */ @@ -154,6 +152,11 @@ static bool is_ereg(u32 reg) BIT(BPF_REG_AX)); } +static bool is_axreg(u32 reg) +{ + return reg == BPF_REG_0; +} + /* add modifiers if 'reg' maps to x64 registers r8..r15 */ static u8 add_1mod(u8 byte, u32 reg) { @@ -447,16 +450,36 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image, else if (is_ereg(dst_reg)) EMIT1(add_1mod(0x40, dst_reg)); + /* b3 holds 'normal' opcode, b2 short form only valid + * in case dst is eax/rax. + */ switch (BPF_OP(insn->code)) { - case BPF_ADD: b3 = 0xC0; break; - case BPF_SUB: b3 = 0xE8; break; - case BPF_AND: b3 = 0xE0; break; - case BPF_OR: b3 = 0xC8; break; - case BPF_XOR: b3 = 0xF0; break; + case BPF_ADD: + b3 = 0xC0; + b2 = 0x05; + break; + case BPF_SUB: + b3 = 0xE8; + b2 = 0x2D; + break; + case BPF_AND: + b3 = 0xE0; + b2 = 0x25; + break; + case BPF_OR: + b3 = 0xC8; + b2 = 0x0D; + break; + case BPF_XOR: + b3 = 0xF0; + b2 = 0x35; + break; } if (is_imm8(imm32)) EMIT3(0x83, add_1reg(b3, dst_reg), imm32); + else if (is_axreg(dst_reg)) + EMIT1_off32(b2, imm32); else EMIT2_off32(0x81, add_1reg(b3, dst_reg), imm32); break; @@ -1109,19 +1132,29 @@ common_load: return proglen; } +struct x64_jit_data { + struct bpf_binary_header *header; + int *addrs; + u8 *image; + int proglen; + struct jit_context ctx; +}; + struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) { struct bpf_binary_header *header = NULL; struct bpf_prog *tmp, *orig_prog = prog; + struct x64_jit_data *jit_data; int proglen, oldproglen = 0; struct jit_context ctx = {}; bool tmp_blinded = false; + bool extra_pass = false; u8 *image = NULL; int *addrs; int pass; int i; - if (!bpf_jit_enable) + if (!prog->jit_requested) return orig_prog; tmp = bpf_jit_blind_constants(prog); @@ -1135,10 +1168,28 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) prog = tmp; } + jit_data = prog->aux->jit_data; + if (!jit_data) { + jit_data = kzalloc(sizeof(*jit_data), GFP_KERNEL); + if (!jit_data) { + prog = orig_prog; + goto out; + } + prog->aux->jit_data = jit_data; + } + addrs = jit_data->addrs; + if (addrs) { + ctx = jit_data->ctx; + oldproglen = jit_data->proglen; + image = jit_data->image; + header = jit_data->header; + extra_pass = true; + goto skip_init_addrs; + } addrs = kmalloc(prog->len * sizeof(*addrs), GFP_KERNEL); if (!addrs) { prog = orig_prog; - goto out; + goto out_addrs; } /* Before first pass, make a rough estimation of addrs[] @@ -1149,6 +1200,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) addrs[i] = proglen; } ctx.cleanup_addr = proglen; +skip_init_addrs: /* JITed image shrinks with every pass and the loop iterates * until the image stops shrinking. Very large bpf programs @@ -1189,7 +1241,15 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) if (image) { bpf_flush_icache(header, image + proglen); - bpf_jit_binary_lock_ro(header); + if (!prog->is_func || extra_pass) { + bpf_jit_binary_lock_ro(header); + } else { + jit_data->addrs = addrs; + jit_data->ctx = ctx; + jit_data->proglen = proglen; + jit_data->image = image; + jit_data->header = header; + } prog->bpf_func = (void *)image; prog->jited = 1; prog->jited_len = proglen; @@ -1197,8 +1257,12 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) prog = orig_prog; } + if (!prog->is_func || extra_pass) { out_addrs: - kfree(addrs); + kfree(addrs); + kfree(jit_data); + prog->aux->jit_data = NULL; + } out: if (tmp_blinded) bpf_jit_prog_release_other(prog, prog == orig_prog ? diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c index ce47eb17901d..6470e3c4c990 100644 --- a/drivers/atm/eni.c +++ b/drivers/atm/eni.c @@ -473,7 +473,7 @@ static int do_rx_dma(struct atm_vcc *vcc,struct sk_buff *skb, ENI_PRV_POS(skb) = eni_vcc->descr+size+1; skb_queue_tail(&eni_dev->rx_queue,skb); eni_vcc->last = skb; -rx_enqueued++; + rx_enqueued++; } eni_vcc->descr = here; eni_out(dma_wr,MID_DMA_WR_RX); @@ -715,7 +715,7 @@ static void get_service(struct atm_dev *dev) else eni_dev->slow = vcc; eni_dev->last_slow = vcc; } -putting++; + putting++; ENI_VCC(vcc)->servicing++; } } @@ -744,7 +744,7 @@ static void dequeue_rx(struct atm_dev *dev) } EVENT("dequeued (size=%ld,pos=0x%lx)\n",ENI_PRV_SIZE(skb), ENI_PRV_POS(skb)); -rx_dequeued++; + rx_dequeued++; vcc = ATM_SKB(skb)->vcc; eni_vcc = ENI_VCC(vcc); first = 0; @@ -1174,7 +1174,7 @@ DPRINTK("doing direct send\n"); /* @@@ well, this doesn't work anyway */ DPRINTK("dma_wr set to %d, tx_pos is now %ld\n",dma_wr,tx->tx_pos); eni_out(dma_wr,MID_DMA_WR_TX); skb_queue_tail(&eni_dev->tx_queue,skb); -queued++; + queued++; return enq_ok; } @@ -1195,7 +1195,7 @@ static void poll_tx(struct atm_dev *dev) if (res == enq_ok) continue; DPRINTK("re-queuing TX PDU\n"); skb_queue_head(&tx->backlog,skb); -requeued++; + requeued++; if (res == enq_jam) return; break; } @@ -1232,7 +1232,7 @@ static void dequeue_tx(struct atm_dev *dev) else dev_kfree_skb_irq(skb); atomic_inc(&vcc->stats->tx); wake_up(&eni_dev->tx_wait); -dma_complete++; + dma_complete++; } } @@ -1555,7 +1555,7 @@ static void eni_tasklet(unsigned long data) } if (events & MID_TX_COMPLETE) { EVENT("INT: TX COMPLETE\n",0,0); -tx_complete++; + tx_complete++; wake_up(&eni_dev->tx_wait); /* poll_rx ? */ } @@ -2069,14 +2069,14 @@ static int eni_send(struct atm_vcc *vcc,struct sk_buff *skb) } *(u32 *) skb->data = htonl(*(u32 *) skb->data); } -submitted++; + submitted++; ATM_SKB(skb)->vcc = vcc; tasklet_disable(&ENI_DEV(vcc->dev)->task); res = do_tx(skb); tasklet_enable(&ENI_DEV(vcc->dev)->task); if (res == enq_ok) return 0; skb_queue_tail(&ENI_VCC(vcc)->tx->backlog,skb); -backlogged++; + backlogged++; tasklet_schedule(&ENI_DEV(vcc->dev)->task); return 0; } diff --git a/drivers/base/property.c b/drivers/base/property.c index 851b1b6596a4..613ba820f545 100644 --- a/drivers/base/property.c +++ b/drivers/base/property.c @@ -16,6 +16,7 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_graph.h> +#include <linux/of_irq.h> #include <linux/property.h> #include <linux/etherdevice.h> #include <linux/phy.h> @@ -997,6 +998,32 @@ fwnode_get_next_child_node(const struct fwnode_handle *fwnode, EXPORT_SYMBOL_GPL(fwnode_get_next_child_node); /** + * fwnode_get_next_available_child_node - Return the next + * available child node handle for a node + * @fwnode: Firmware node to find the next child node for. + * @child: Handle to one of the node's child nodes or a %NULL handle. + */ +struct fwnode_handle * +fwnode_get_next_available_child_node(const struct fwnode_handle *fwnode, + struct fwnode_handle *child) +{ + struct fwnode_handle *next_child = child; + + if (!fwnode) + return NULL; + + do { + next_child = fwnode_get_next_child_node(fwnode, next_child); + + if (!next_child || fwnode_device_is_available(next_child)) + break; + } while (next_child); + + return next_child; +} +EXPORT_SYMBOL_GPL(fwnode_get_next_available_child_node); + +/** * device_get_next_child_node - Return the next child node handle for a device * @dev: Device to find the next child node for. * @child: Handle to one of the device's child nodes or a null handle. @@ -1126,21 +1153,21 @@ enum dev_dma_attr device_get_dma_attr(struct device *dev) EXPORT_SYMBOL_GPL(device_get_dma_attr); /** - * device_get_phy_mode - Get phy mode for given device - * @dev: Pointer to the given device + * fwnode_get_phy_mode - Get phy mode for given firmware node + * @fwnode: Pointer to the given node * * The function gets phy interface string from property 'phy-mode' or * 'phy-connection-type', and return its index in phy_modes table, or errno in * error case. */ -int device_get_phy_mode(struct device *dev) +int fwnode_get_phy_mode(struct fwnode_handle *fwnode) { const char *pm; int err, i; - err = device_property_read_string(dev, "phy-mode", &pm); + err = fwnode_property_read_string(fwnode, "phy-mode", &pm); if (err < 0) - err = device_property_read_string(dev, + err = fwnode_property_read_string(fwnode, "phy-connection-type", &pm); if (err < 0) return err; @@ -1151,13 +1178,27 @@ int device_get_phy_mode(struct device *dev) return -ENODEV; } +EXPORT_SYMBOL_GPL(fwnode_get_phy_mode); + +/** + * device_get_phy_mode - Get phy mode for given device + * @dev: Pointer to the given device + * + * The function gets phy interface string from property 'phy-mode' or + * 'phy-connection-type', and return its index in phy_modes table, or errno in + * error case. + */ +int device_get_phy_mode(struct device *dev) +{ + return fwnode_get_phy_mode(dev_fwnode(dev)); +} EXPORT_SYMBOL_GPL(device_get_phy_mode); -static void *device_get_mac_addr(struct device *dev, +static void *fwnode_get_mac_addr(struct fwnode_handle *fwnode, const char *name, char *addr, int alen) { - int ret = device_property_read_u8_array(dev, name, addr, alen); + int ret = fwnode_property_read_u8_array(fwnode, name, addr, alen); if (ret == 0 && alen == ETH_ALEN && is_valid_ether_addr(addr)) return addr; @@ -1165,8 +1206,8 @@ static void *device_get_mac_addr(struct device *dev, } /** - * device_get_mac_address - Get the MAC for a given device - * @dev: Pointer to the device + * fwnode_get_mac_address - Get the MAC from the firmware node + * @fwnode: Pointer to the firmware node * @addr: Address of buffer to store the MAC in * @alen: Length of the buffer pointed to by addr, should be ETH_ALEN * @@ -1187,23 +1228,60 @@ static void *device_get_mac_addr(struct device *dev, * In this case, the real MAC is in 'local-mac-address', and 'mac-address' * exists but is all zeros. */ -void *device_get_mac_address(struct device *dev, char *addr, int alen) +void *fwnode_get_mac_address(struct fwnode_handle *fwnode, char *addr, int alen) { char *res; - res = device_get_mac_addr(dev, "mac-address", addr, alen); + res = fwnode_get_mac_addr(fwnode, "mac-address", addr, alen); if (res) return res; - res = device_get_mac_addr(dev, "local-mac-address", addr, alen); + res = fwnode_get_mac_addr(fwnode, "local-mac-address", addr, alen); if (res) return res; - return device_get_mac_addr(dev, "address", addr, alen); + return fwnode_get_mac_addr(fwnode, "address", addr, alen); +} +EXPORT_SYMBOL(fwnode_get_mac_address); + +/** + * device_get_mac_address - Get the MAC for a given device + * @dev: Pointer to the device + * @addr: Address of buffer to store the MAC in + * @alen: Length of the buffer pointed to by addr, should be ETH_ALEN + */ +void *device_get_mac_address(struct device *dev, char *addr, int alen) +{ + return fwnode_get_mac_address(dev_fwnode(dev), addr, alen); } EXPORT_SYMBOL(device_get_mac_address); /** + * fwnode_irq_get - Get IRQ directly from a fwnode + * @fwnode: Pointer to the firmware node + * @index: Zero-based index of the IRQ + * + * Returns Linux IRQ number on success. Other values are determined + * accordingly to acpi_/of_ irq_get() operation. + */ +int fwnode_irq_get(struct fwnode_handle *fwnode, unsigned int index) +{ + struct device_node *of_node = to_of_node(fwnode); + struct resource res; + int ret; + + if (IS_ENABLED(CONFIG_OF) && of_node) + return of_irq_get(of_node, index); + + ret = acpi_irq_get(ACPI_HANDLE_FWNODE(fwnode), index, &res); + if (ret) + return ret; + + return res.start; +} +EXPORT_SYMBOL(fwnode_irq_get); + +/** * device_graph_get_next_endpoint - Get next endpoint firmware node * @fwnode: Pointer to the parent firmware node * @prev: Previous endpoint node or %NULL to get the first diff --git a/drivers/bcma/driver_pcie2.c b/drivers/bcma/driver_pcie2.c index b1a6e327cb23..cf889fc62ac7 100644 --- a/drivers/bcma/driver_pcie2.c +++ b/drivers/bcma/driver_pcie2.c @@ -83,7 +83,8 @@ static void bcma_core_pcie2_hw_ltr_war(struct bcma_drv_pcie2 *pcie2) bcma_core_pcie2_set_ltr_vals(pcie2); /* TODO: - si_core_wrapperreg(pcie2, 3, 0x60, 0x8080, 0); */ + *si_core_wrapperreg(pcie2, 3, 0x60, 0x8080, 0); + */ /* enable the LTR */ devstsctr2 |= PCIE2_CAP_DEVSTSCTRL2_LTRENAB; diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index 60e1c7d6986d..07e55cd8f8c8 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -31,6 +31,16 @@ config BT_HCIBTUSB Say Y here to compile support for Bluetooth USB devices into the kernel or say M to compile it as module (btusb). +config BT_HCIBTUSB_AUTOSUSPEND + bool "Enable USB autosuspend for Bluetooth USB devices by default" + depends on BT_HCIBTUSB + help + Say Y here to enable USB autosuspend for Bluetooth USB devices by + default. + + This can be overridden by passing btusb.enable_autosuspend=[y|n] + on the kernel commandline. + config BT_HCIBTUSB_BCM bool "Broadcom protocol support" depends on BT_HCIBTUSB @@ -67,6 +77,7 @@ config BT_HCIBTSDIO config BT_HCIUART tristate "HCI UART driver" depends on SERIAL_DEV_BUS || !SERIAL_DEV_BUS + depends on NVMEM || !NVMEM depends on TTY help Bluetooth HCI UART driver. @@ -97,6 +108,7 @@ config BT_HCIUART_NOKIA tristate "UART Nokia H4+ protocol support" depends on BT_HCIUART depends on BT_HCIUART_SERDEV + depends on GPIOLIB depends on PM select BT_HCIUART_H4 select BT_BCM @@ -158,6 +170,7 @@ config BT_HCIUART_3WIRE config BT_HCIUART_INTEL bool "Intel protocol support" depends on BT_HCIUART + depends on GPIOLIB select BT_HCIUART_H4 select BT_INTEL help @@ -171,6 +184,7 @@ config BT_HCIUART_BCM depends on BT_HCIUART depends on BT_HCIUART_SERDEV depends on (!ACPI || SERIAL_DEV_CTRL_TTYPORT) + depends on GPIOLIB select BT_HCIUART_H4 select BT_BCM help diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c index d513ef4743dc..82437a69f99c 100644 --- a/drivers/bluetooth/bluecard_cs.c +++ b/drivers/bluetooth/bluecard_cs.c @@ -302,9 +302,7 @@ static void bluecard_write_wakeup(struct bluecard_info *info) } /* Wait until the command reaches the baseband */ - prepare_to_wait(&wq, &wait, TASK_INTERRUPTIBLE); - schedule_timeout(HZ/10); - finish_wait(&wq, &wait); + mdelay(100); /* Set baud on baseband */ info->ctrl_reg &= ~0x03; @@ -316,9 +314,7 @@ static void bluecard_write_wakeup(struct bluecard_info *info) outb(info->ctrl_reg, iobase + REG_CONTROL); /* Wait before the next HCI packet can be send */ - prepare_to_wait(&wq, &wait, TASK_INTERRUPTIBLE); - schedule_timeout(HZ); - finish_wait(&wq, &wait); + mdelay(1000); } if (len == skb->len) { diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c index 7971bfbd4321..801ea4ca65e4 100644 --- a/drivers/bluetooth/bpa10x.c +++ b/drivers/bluetooth/bpa10x.c @@ -259,7 +259,7 @@ static int bpa10x_flush(struct hci_dev *hdev) static int bpa10x_setup(struct hci_dev *hdev) { - const u8 req[] = { 0x07 }; + static const u8 req[] = { 0x07 }; struct sk_buff *skb; BT_DBG("%s", hdev->name); diff --git a/drivers/bluetooth/btbcm.h b/drivers/bluetooth/btbcm.h index d9e6b41658e5..cfe6ad4cc621 100644 --- a/drivers/bluetooth/btbcm.h +++ b/drivers/bluetooth/btbcm.h @@ -44,8 +44,8 @@ struct bcm_set_sleep_mode { __u8 tristate_control; __u8 usb_auto_sleep; __u8 usb_resume_timeout; - __u8 pulsed_host_wake; __u8 break_to_host; + __u8 pulsed_host_wake; } __packed; struct bcm_set_pcm_int_params { diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c index 4459555c9d88..07f00e422e85 100644 --- a/drivers/bluetooth/btintel.c +++ b/drivers/bluetooth/btintel.c @@ -75,7 +75,7 @@ EXPORT_SYMBOL_GPL(btintel_check_bdaddr); int btintel_enter_mfg(struct hci_dev *hdev) { - const u8 param[] = { 0x01, 0x00 }; + static const u8 param[] = { 0x01, 0x00 }; struct sk_buff *skb; skb = __hci_cmd_sync(hdev, 0xfc11, 2, param, HCI_CMD_TIMEOUT); diff --git a/drivers/bluetooth/btqcomsmd.c b/drivers/bluetooth/btqcomsmd.c index 663bed63b871..2c9a5fc9137d 100644 --- a/drivers/bluetooth/btqcomsmd.c +++ b/drivers/bluetooth/btqcomsmd.c @@ -88,7 +88,8 @@ static int btqcomsmd_send(struct hci_dev *hdev, struct sk_buff *skb) break; } - kfree_skb(skb); + if (!ret) + kfree_skb(skb); return ret; } diff --git a/drivers/bluetooth/btsdio.c b/drivers/bluetooth/btsdio.c index c8e945d19ffe..20142bc77554 100644 --- a/drivers/bluetooth/btsdio.c +++ b/drivers/bluetooth/btsdio.c @@ -31,6 +31,7 @@ #include <linux/errno.h> #include <linux/skbuff.h> +#include <linux/mmc/host.h> #include <linux/mmc/sdio_ids.h> #include <linux/mmc/sdio_func.h> @@ -292,6 +293,14 @@ static int btsdio_probe(struct sdio_func *func, tuple = tuple->next; } + /* BCM43341 devices soldered onto the PCB (non-removable) use an + * uart connection for bluetooth, ignore the BT SDIO interface. + */ + if (func->vendor == SDIO_VENDOR_ID_BROADCOM && + func->device == SDIO_DEVICE_ID_BROADCOM_43341 && + !mmc_card_is_removable(func->card->host)) + return -ENODEV; + data = devm_kzalloc(&func->dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index f7120c9eb9bd..29977ebfd031 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -23,6 +23,7 @@ #include <linux/module.h> #include <linux/usb.h> +#include <linux/usb/quirks.h> #include <linux/firmware.h> #include <linux/of_device.h> #include <linux/of_irq.h> @@ -40,6 +41,7 @@ static bool disable_scofix; static bool force_scofix; +static bool enable_autosuspend = IS_ENABLED(CONFIG_BT_HCIBTUSB_AUTOSUSPEND); static bool reset = true; @@ -263,6 +265,7 @@ static const struct usb_device_id blacklist_table[] = { /* QCA ROME chipset */ { USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME }, { USB_DEVICE(0x0cf3, 0xe009), .driver_info = BTUSB_QCA_ROME }, + { USB_DEVICE(0x0cf3, 0xe010), .driver_info = BTUSB_QCA_ROME }, { USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME }, { USB_DEVICE(0x0cf3, 0xe301), .driver_info = BTUSB_QCA_ROME }, { USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME }, @@ -270,6 +273,7 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0489, 0xe09f), .driver_info = BTUSB_QCA_ROME }, { USB_DEVICE(0x0489, 0xe0a2), .driver_info = BTUSB_QCA_ROME }, { USB_DEVICE(0x04ca, 0x3011), .driver_info = BTUSB_QCA_ROME }, + { USB_DEVICE(0x04ca, 0x3015), .driver_info = BTUSB_QCA_ROME }, { USB_DEVICE(0x04ca, 0x3016), .driver_info = BTUSB_QCA_ROME }, /* Broadcom BCM2035 */ @@ -387,9 +391,8 @@ static const struct usb_device_id blacklist_table[] = { #define BTUSB_FIRMWARE_LOADED 7 #define BTUSB_FIRMWARE_FAILED 8 #define BTUSB_BOOTING 9 -#define BTUSB_RESET_RESUME 10 -#define BTUSB_DIAG_RUNNING 11 -#define BTUSB_OOB_WAKE_ENABLED 12 +#define BTUSB_DIAG_RUNNING 10 +#define BTUSB_OOB_WAKE_ENABLED 11 struct btusb_data { struct hci_dev *hdev; @@ -3120,9 +3123,9 @@ static int btusb_probe(struct usb_interface *intf, /* QCA Rome devices lose their updated firmware over suspend, * but the USB hub doesn't notice any status change. - * Explicitly request a device reset on resume. + * explicitly request a device reset on resume. */ - set_bit(BTUSB_RESET_RESUME, &data->flags); + interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME; } #ifdef CONFIG_BT_HCIBTUSB_RTL @@ -3133,7 +3136,7 @@ static int btusb_probe(struct usb_interface *intf, * but the USB hub doesn't notice any status change. * Explicitly request a device reset on resume. */ - set_bit(BTUSB_RESET_RESUME, &data->flags); + interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME; } #endif @@ -3213,6 +3216,9 @@ static int btusb_probe(struct usb_interface *intf, } #endif + if (enable_autosuspend) + usb_enable_autosuspend(data->udev); + err = hci_register_dev(hdev); if (err < 0) goto out_free_dev; @@ -3299,14 +3305,6 @@ static int btusb_suspend(struct usb_interface *intf, pm_message_t message) enable_irq(data->oob_wake_irq); } - /* Optionally request a device reset on resume, but only when - * wakeups are disabled. If wakeups are enabled we assume the - * device will stay powered up throughout suspend. - */ - if (test_bit(BTUSB_RESET_RESUME, &data->flags) && - !device_may_wakeup(&data->udev->dev)) - data->udev->reset_resume = 1; - return 0; } @@ -3425,6 +3423,9 @@ MODULE_PARM_DESC(disable_scofix, "Disable fixup of wrong SCO buffer size"); module_param(force_scofix, bool, 0644); MODULE_PARM_DESC(force_scofix, "Force fixup of wrong SCO buffers size"); +module_param(enable_autosuspend, bool, 0644); +MODULE_PARM_DESC(enable_autosuspend, "Enable USB autosuspend by default"); + module_param(reset, bool, 0644); MODULE_PARM_DESC(reset, "Send HCI reset command on initialization"); diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c index 707c2d1b84c7..64800cd2796c 100644 --- a/drivers/bluetooth/hci_bcm.c +++ b/drivers/bluetooth/hci_bcm.c @@ -29,6 +29,7 @@ #include <linux/acpi.h> #include <linux/of.h> #include <linux/property.h> +#include <linux/platform_data/x86/apple.h> #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/gpio/consumer.h> @@ -52,7 +53,37 @@ #define BCM_AUTOSUSPEND_DELAY 5000 /* default autosleep delay */ -/* device driver resources */ +/** + * struct bcm_device - device driver resources + * @serdev_hu: HCI UART controller struct + * @list: bcm_device_list node + * @dev: physical UART slave + * @name: device name logged by bt_dev_*() functions + * @device_wakeup: BT_WAKE pin, + * assert = Bluetooth device must wake up or remain awake, + * deassert = Bluetooth device may sleep when sleep criteria are met + * @shutdown: BT_REG_ON pin, + * power up or power down Bluetooth device internal regulators + * @set_device_wakeup: callback to toggle BT_WAKE pin + * either by accessing @device_wakeup or by calling @btlp + * @set_shutdown: callback to toggle BT_REG_ON pin + * either by accessing @shutdown or by calling @btpu/@btpd + * @btlp: Apple ACPI method to toggle BT_WAKE pin ("Bluetooth Low Power") + * @btpu: Apple ACPI method to drive BT_REG_ON pin high ("Bluetooth Power Up") + * @btpd: Apple ACPI method to drive BT_REG_ON pin low ("Bluetooth Power Down") + * @clk: clock used by Bluetooth device + * @clk_enabled: whether @clk is prepared and enabled + * @init_speed: default baudrate of Bluetooth device; + * the host UART is initially set to this baudrate so that + * it can configure the Bluetooth device for @oper_speed + * @oper_speed: preferred baudrate of Bluetooth device; + * set to 0 if @init_speed is already the preferred baudrate + * @irq: interrupt triggered by HOST_WAKE_BT pin + * @irq_active_low: whether @irq is active low + * @hu: pointer to HCI UART controller struct, + * used to disable flow control during runtime suspend and system sleep + * @is_suspended: whether flow control is currently disabled + */ struct bcm_device { /* Must be the first member, hci_serdev.c expects this. */ struct hci_uart serdev_hu; @@ -63,6 +94,11 @@ struct bcm_device { const char *name; struct gpio_desc *device_wakeup; struct gpio_desc *shutdown; + int (*set_device_wakeup)(struct bcm_device *, bool); + int (*set_shutdown)(struct bcm_device *, bool); +#ifdef CONFIG_ACPI + acpi_handle btlp, btpu, btpd; +#endif struct clk *clk; bool clk_enabled; @@ -74,7 +110,7 @@ struct bcm_device { #ifdef CONFIG_PM struct hci_uart *hu; - bool is_suspended; /* suspend/resume flag */ + bool is_suspended; #endif }; @@ -170,11 +206,21 @@ static bool bcm_device_exists(struct bcm_device *device) static int bcm_gpio_set_power(struct bcm_device *dev, bool powered) { - if (powered && !IS_ERR(dev->clk) && !dev->clk_enabled) - clk_prepare_enable(dev->clk); + int err; - gpiod_set_value(dev->shutdown, powered); - gpiod_set_value(dev->device_wakeup, powered); + if (powered && !IS_ERR(dev->clk) && !dev->clk_enabled) { + err = clk_prepare_enable(dev->clk); + if (err) + return err; + } + + err = dev->set_shutdown(dev, powered); + if (err) + goto err_clk_disable; + + err = dev->set_device_wakeup(dev, powered); + if (err) + goto err_revert_shutdown; if (!powered && !IS_ERR(dev->clk) && dev->clk_enabled) clk_disable_unprepare(dev->clk); @@ -182,6 +228,13 @@ static int bcm_gpio_set_power(struct bcm_device *dev, bool powered) dev->clk_enabled = powered; return 0; + +err_revert_shutdown: + dev->set_shutdown(dev, !powered); +err_clk_disable: + if (powered && !IS_ERR(dev->clk) && !dev->clk_enabled) + clk_disable_unprepare(dev->clk); + return err; } #ifdef CONFIG_PM @@ -191,9 +244,7 @@ static irqreturn_t bcm_host_wake(int irq, void *data) bt_dev_dbg(bdev, "Host wake IRQ"); - pm_runtime_get(bdev->dev); - pm_runtime_mark_last_busy(bdev->dev); - pm_runtime_put_autosuspend(bdev->dev); + pm_request_resume(bdev->dev); return IRQ_HANDLED; } @@ -218,8 +269,10 @@ static int bcm_request_irq(struct bcm_data *bcm) bdev->irq_active_low ? IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING, "host_wake", bdev); - if (err) + if (err) { + bdev->irq = err; goto unlock; + } device_init_wakeup(bdev->dev, true); @@ -247,8 +300,8 @@ static const struct bcm_set_sleep_mode default_sleep_params = { /* Irrelevant USB flags */ .usb_auto_sleep = 0, .usb_resume_timeout = 0, + .break_to_host = 0, .pulsed_host_wake = 0, - .break_to_host = 0 }; static int bcm_setup_sleep(struct hci_uart *hu) @@ -304,6 +357,7 @@ static int bcm_open(struct hci_uart *hu) { struct bcm_data *bcm; struct list_head *p; + int err; bt_dev_dbg(hu->hdev, "hu %p", hu); @@ -318,7 +372,10 @@ static int bcm_open(struct hci_uart *hu) mutex_lock(&bcm_device_lock); if (hu->serdev) { - serdev_device_open(hu->serdev); + err = serdev_device_open(hu->serdev); + if (err) + goto err_free; + bcm->dev = serdev_device_get_drvdata(hu->serdev); goto out; } @@ -346,17 +403,30 @@ out: if (bcm->dev) { hu->init_speed = bcm->dev->init_speed; hu->oper_speed = bcm->dev->oper_speed; - bcm_gpio_set_power(bcm->dev, true); + err = bcm_gpio_set_power(bcm->dev, true); + if (err) + goto err_unset_hu; } mutex_unlock(&bcm_device_lock); return 0; + +err_unset_hu: +#ifdef CONFIG_PM + bcm->dev->hu = NULL; +#endif +err_free: + mutex_unlock(&bcm_device_lock); + hu->priv = NULL; + kfree(bcm); + return err; } static int bcm_close(struct hci_uart *hu) { struct bcm_data *bcm = hu->priv; struct bcm_device *bdev = NULL; + int err; bt_dev_dbg(hu->hdev, "hu %p", hu); @@ -374,16 +444,17 @@ static int bcm_close(struct hci_uart *hu) } if (bdev) { - bcm_gpio_set_power(bdev, false); -#ifdef CONFIG_PM - pm_runtime_disable(bdev->dev); - pm_runtime_set_suspended(bdev->dev); - - if (device_can_wakeup(bdev->dev)) { + if (IS_ENABLED(CONFIG_PM) && bdev->irq > 0) { devm_free_irq(bdev->dev, bdev->irq, bdev); device_init_wakeup(bdev->dev, false); + pm_runtime_disable(bdev->dev); } -#endif + + err = bcm_gpio_set_power(bdev, false); + if (err) + bt_dev_err(hu->hdev, "Failed to power down"); + else + pm_runtime_set_suspended(bdev->dev); } mutex_unlock(&bcm_device_lock); @@ -512,11 +583,8 @@ static int bcm_recv(struct hci_uart *hu, const void *data, int count) } else if (!bcm->rx_skb) { /* Delay auto-suspend when receiving completed packet */ mutex_lock(&bcm_device_lock); - if (bcm->dev && bcm_device_exists(bcm->dev)) { - pm_runtime_get(bcm->dev->dev); - pm_runtime_mark_last_busy(bcm->dev->dev); - pm_runtime_put_autosuspend(bcm->dev->dev); - } + if (bcm->dev && bcm_device_exists(bcm->dev)) + pm_request_resume(bcm->dev->dev); mutex_unlock(&bcm_device_lock); } @@ -566,6 +634,7 @@ static struct sk_buff *bcm_dequeue(struct hci_uart *hu) static int bcm_suspend_device(struct device *dev) { struct bcm_device *bdev = dev_get_drvdata(dev); + int err; bt_dev_dbg(bdev, ""); @@ -577,27 +646,37 @@ static int bcm_suspend_device(struct device *dev) } /* Suspend the device */ - if (bdev->device_wakeup) { - gpiod_set_value(bdev->device_wakeup, false); - bt_dev_dbg(bdev, "suspend, delaying 15 ms"); - mdelay(15); + err = bdev->set_device_wakeup(bdev, false); + if (err) { + if (bdev->is_suspended && bdev->hu) { + bdev->is_suspended = false; + hci_uart_set_flow_control(bdev->hu, false); + } + return -EBUSY; } + bt_dev_dbg(bdev, "suspend, delaying 15 ms"); + msleep(15); + return 0; } static int bcm_resume_device(struct device *dev) { struct bcm_device *bdev = dev_get_drvdata(dev); + int err; bt_dev_dbg(bdev, ""); - if (bdev->device_wakeup) { - gpiod_set_value(bdev->device_wakeup, true); - bt_dev_dbg(bdev, "resume, delaying 15 ms"); - mdelay(15); + err = bdev->set_device_wakeup(bdev, true); + if (err) { + dev_err(dev, "Failed to power up\n"); + return err; } + bt_dev_dbg(bdev, "resume, delaying 15 ms"); + msleep(15); + /* When this executes, the device has woken up already */ if (bdev->is_suspended && bdev->hu) { bdev->is_suspended = false; @@ -632,7 +711,7 @@ static int bcm_suspend(struct device *dev) if (pm_runtime_active(dev)) bcm_suspend_device(dev); - if (device_may_wakeup(dev)) { + if (device_may_wakeup(dev) && bdev->irq > 0) { error = enable_irq_wake(bdev->irq); if (!error) bt_dev_dbg(bdev, "BCM irq: enabled"); @@ -648,6 +727,7 @@ unlock: static int bcm_resume(struct device *dev) { struct bcm_device *bdev = dev_get_drvdata(dev); + int err = 0; bt_dev_dbg(bdev, "resume: is_suspended %d", bdev->is_suspended); @@ -662,19 +742,21 @@ static int bcm_resume(struct device *dev) if (!bdev->hu) goto unlock; - if (device_may_wakeup(dev)) { + if (device_may_wakeup(dev) && bdev->irq > 0) { disable_irq_wake(bdev->irq); bt_dev_dbg(bdev, "BCM irq: disabled"); } - bcm_resume_device(dev); + err = bcm_resume_device(dev); unlock: mutex_unlock(&bcm_device_lock); - pm_runtime_disable(dev); - pm_runtime_set_active(dev); - pm_runtime_enable(dev); + if (!err) { + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + } return 0; } @@ -771,25 +853,84 @@ static int bcm_resource(struct acpi_resource *ares, void *data) return 0; } + +static int bcm_apple_set_device_wakeup(struct bcm_device *dev, bool awake) +{ + if (ACPI_FAILURE(acpi_execute_simple_method(dev->btlp, NULL, !awake))) + return -EIO; + + return 0; +} + +static int bcm_apple_set_shutdown(struct bcm_device *dev, bool powered) +{ + if (ACPI_FAILURE(acpi_evaluate_object(powered ? dev->btpu : dev->btpd, + NULL, NULL, NULL))) + return -EIO; + + return 0; +} + +static int bcm_apple_get_resources(struct bcm_device *dev) +{ + struct acpi_device *adev = ACPI_COMPANION(dev->dev); + const union acpi_object *obj; + + if (!adev || + ACPI_FAILURE(acpi_get_handle(adev->handle, "BTLP", &dev->btlp)) || + ACPI_FAILURE(acpi_get_handle(adev->handle, "BTPU", &dev->btpu)) || + ACPI_FAILURE(acpi_get_handle(adev->handle, "BTPD", &dev->btpd))) + return -ENODEV; + + if (!acpi_dev_get_property(adev, "baud", ACPI_TYPE_BUFFER, &obj) && + obj->buffer.length == 8) + dev->init_speed = *(u64 *)obj->buffer.pointer; + + dev->set_device_wakeup = bcm_apple_set_device_wakeup; + dev->set_shutdown = bcm_apple_set_shutdown; + + return 0; +} +#else +static inline int bcm_apple_get_resources(struct bcm_device *dev) +{ + return -EOPNOTSUPP; +} #endif /* CONFIG_ACPI */ +static int bcm_gpio_set_device_wakeup(struct bcm_device *dev, bool awake) +{ + gpiod_set_value(dev->device_wakeup, awake); + return 0; +} + +static int bcm_gpio_set_shutdown(struct bcm_device *dev, bool powered) +{ + gpiod_set_value(dev->shutdown, powered); + return 0; +} + static int bcm_get_resources(struct bcm_device *dev) { dev->name = dev_name(dev->dev); + if (x86_apple_machine && !bcm_apple_get_resources(dev)) + return 0; + dev->clk = devm_clk_get(dev->dev, NULL); - dev->device_wakeup = devm_gpiod_get_optional(dev->dev, - "device-wakeup", - GPIOD_OUT_LOW); + dev->device_wakeup = devm_gpiod_get(dev->dev, "device-wakeup", + GPIOD_OUT_LOW); if (IS_ERR(dev->device_wakeup)) return PTR_ERR(dev->device_wakeup); - dev->shutdown = devm_gpiod_get_optional(dev->dev, "shutdown", - GPIOD_OUT_LOW); + dev->shutdown = devm_gpiod_get(dev->dev, "shutdown", GPIOD_OUT_LOW); if (IS_ERR(dev->shutdown)) return PTR_ERR(dev->shutdown); + dev->set_device_wakeup = bcm_gpio_set_device_wakeup; + dev->set_shutdown = bcm_gpio_set_shutdown; + /* IRQ can be declared in ACPI table as Interrupt or GpioInt */ if (dev->irq <= 0) { struct gpio_desc *gpio; @@ -802,7 +943,7 @@ static int bcm_get_resources(struct bcm_device *dev) dev->irq = gpiod_to_irq(gpio); } - dev_info(dev->dev, "BCM irq: %d\n", dev->irq); + dev_dbg(dev->dev, "BCM irq: %d\n", dev->irq); return 0; } @@ -892,7 +1033,9 @@ static int bcm_probe(struct platform_device *pdev) list_add_tail(&dev->list, &bcm_device_list); mutex_unlock(&bcm_device_lock); - bcm_gpio_set_power(dev, false); + ret = bcm_gpio_set_power(dev, false); + if (ret) + dev_err(&pdev->dev, "Failed to power down\n"); return 0; } @@ -939,6 +1082,7 @@ static const struct acpi_device_id bcm_acpi_match[] = { { "BCM2E65", (kernel_ulong_t)&acpi_bcm_int_last_gpios }, { "BCM2E67", (kernel_ulong_t)&acpi_bcm_int_last_gpios }, { "BCM2E71", (kernel_ulong_t)&acpi_bcm_int_last_gpios }, + { "BCM2E72", (kernel_ulong_t)&acpi_bcm_int_last_gpios }, { "BCM2E7B", (kernel_ulong_t)&acpi_bcm_int_last_gpios }, { "BCM2E7C", (kernel_ulong_t)&acpi_bcm_int_last_gpios }, { "BCM2E7E", (kernel_ulong_t)&acpi_bcm_int_first_gpios }, @@ -993,7 +1137,9 @@ static int bcm_serdev_probe(struct serdev_device *serdev) if (err) return err; - bcm_gpio_set_power(bcmdev, false); + err = bcm_gpio_set_power(bcmdev, false); + if (err) + dev_err(&serdev->dev, "Failed to power down\n"); return hci_uart_register_device(&bcmdev->serdev_hu, &bcm_proto); } diff --git a/drivers/bluetooth/hci_ll.c b/drivers/bluetooth/hci_ll.c index e2c078d61730..1b4417a623a4 100644 --- a/drivers/bluetooth/hci_ll.c +++ b/drivers/bluetooth/hci_ll.c @@ -53,9 +53,14 @@ #include <net/bluetooth/bluetooth.h> #include <net/bluetooth/hci_core.h> #include <linux/gpio/consumer.h> +#include <linux/nvmem-consumer.h> #include "hci_uart.h" +/* Vendor-specific HCI commands */ +#define HCI_VS_WRITE_BD_ADDR 0xfc06 +#define HCI_VS_UPDATE_UART_HCI_BAUDRATE 0xff36 + /* HCILL commands */ #define HCILL_GO_TO_SLEEP_IND 0x30 #define HCILL_GO_TO_SLEEP_ACK 0x31 @@ -86,6 +91,7 @@ struct ll_device { struct serdev_device *serdev; struct gpio_desc *enable_gpio; struct clk *ext_clk; + bdaddr_t bdaddr; }; struct ll_struct { @@ -620,7 +626,7 @@ static int download_firmware(struct ll_device *lldev) case ACTION_SEND_COMMAND: /* action send */ bt_dev_dbg(lldev->hu.hdev, "S"); cmd = (struct hci_command *)action_ptr; - if (cmd->opcode == 0xff36) { + if (cmd->opcode == HCI_VS_UPDATE_UART_HCI_BAUDRATE) { /* ignore remote change * baud rate HCI VS command */ @@ -628,11 +634,11 @@ static int download_firmware(struct ll_device *lldev) break; } if (cmd->prefix != 1) - bt_dev_dbg(lldev->hu.hdev, "command type %d\n", cmd->prefix); + bt_dev_dbg(lldev->hu.hdev, "command type %d", cmd->prefix); skb = __hci_cmd_sync(lldev->hu.hdev, cmd->opcode, cmd->plen, &cmd->speed, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { - bt_dev_err(lldev->hu.hdev, "send command failed\n"); + bt_dev_err(lldev->hu.hdev, "send command failed"); err = PTR_ERR(skb); goto out_rel_fw; } @@ -659,6 +665,24 @@ out_rel_fw: return err; } +static int ll_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) +{ + bdaddr_t bdaddr_swapped; + struct sk_buff *skb; + + /* HCI_VS_WRITE_BD_ADDR (at least on a CC2560A chip) expects the BD + * address to be MSB first, but bdaddr_t has the convention of being + * LSB first. + */ + baswap(&bdaddr_swapped, bdaddr); + skb = __hci_cmd_sync(hdev, HCI_VS_WRITE_BD_ADDR, sizeof(bdaddr_t), + &bdaddr_swapped, HCI_INIT_TIMEOUT); + if (!IS_ERR(skb)) + kfree_skb(skb); + + return PTR_ERR_OR_ZERO(skb); +} + static int ll_setup(struct hci_uart *hu) { int err, retry = 3; @@ -671,14 +695,20 @@ static int ll_setup(struct hci_uart *hu) lldev = serdev_device_get_drvdata(serdev); + hu->hdev->set_bdaddr = ll_set_bdaddr; + serdev_device_set_flow_control(serdev, true); do { - /* Configure BT_EN to HIGH state */ + /* Reset the Bluetooth device */ gpiod_set_value_cansleep(lldev->enable_gpio, 0); msleep(5); gpiod_set_value_cansleep(lldev->enable_gpio, 1); - msleep(100); + err = serdev_device_wait_for_cts(serdev, true, 200); + if (err) { + bt_dev_err(hu->hdev, "Failed to get CTS"); + return err; + } err = download_firmware(lldev); if (!err) @@ -691,6 +721,18 @@ static int ll_setup(struct hci_uart *hu) if (err) return err; + /* Set BD address if one was specified at probe */ + if (!bacmp(&lldev->bdaddr, BDADDR_NONE)) { + /* This means that there was an error getting the BD address + * during probe, so mark the device as having a bad address. + */ + set_bit(HCI_QUIRK_INVALID_BDADDR, &hu->hdev->quirks); + } else if (bacmp(&lldev->bdaddr, BDADDR_ANY)) { + err = ll_set_bdaddr(hu->hdev, &lldev->bdaddr); + if (err) + set_bit(HCI_QUIRK_INVALID_BDADDR, &hu->hdev->quirks); + } + /* Operational speed if any */ if (hu->oper_speed) speed = hu->oper_speed; @@ -700,7 +742,12 @@ static int ll_setup(struct hci_uart *hu) speed = 0; if (speed) { - struct sk_buff *skb = __hci_cmd_sync(hu->hdev, 0xff36, sizeof(speed), &speed, HCI_INIT_TIMEOUT); + __le32 speed_le = cpu_to_le32(speed); + struct sk_buff *skb; + + skb = __hci_cmd_sync(hu->hdev, HCI_VS_UPDATE_UART_HCI_BAUDRATE, + sizeof(speed_le), &speed_le, + HCI_INIT_TIMEOUT); if (!IS_ERR(skb)) { kfree_skb(skb); serdev_device_set_baudrate(serdev, speed); @@ -716,6 +763,7 @@ static int hci_ti_probe(struct serdev_device *serdev) { struct hci_uart *hu; struct ll_device *lldev; + struct nvmem_cell *bdaddr_cell; u32 max_speed = 3000000; lldev = devm_kzalloc(&serdev->dev, sizeof(struct ll_device), GFP_KERNEL); @@ -737,6 +785,52 @@ static int hci_ti_probe(struct serdev_device *serdev) of_property_read_u32(serdev->dev.of_node, "max-speed", &max_speed); hci_uart_set_speeds(hu, 115200, max_speed); + /* optional BD address from nvram */ + bdaddr_cell = nvmem_cell_get(&serdev->dev, "bd-address"); + if (IS_ERR(bdaddr_cell)) { + int err = PTR_ERR(bdaddr_cell); + + if (err == -EPROBE_DEFER) + return err; + + /* ENOENT means there is no matching nvmem cell and ENOSYS + * means that nvmem is not enabled in the kernel configuration. + */ + if (err != -ENOENT && err != -ENOSYS) { + /* If there was some other error, give userspace a + * chance to fix the problem instead of failing to load + * the driver. Using BDADDR_NONE as a flag that is + * tested later in the setup function. + */ + dev_warn(&serdev->dev, + "Failed to get \"bd-address\" nvmem cell (%d)\n", + err); + bacpy(&lldev->bdaddr, BDADDR_NONE); + } + } else { + bdaddr_t *bdaddr; + size_t len; + + bdaddr = nvmem_cell_read(bdaddr_cell, &len); + nvmem_cell_put(bdaddr_cell); + if (IS_ERR(bdaddr)) { + dev_err(&serdev->dev, "Failed to read nvmem bd-address\n"); + return PTR_ERR(bdaddr); + } + if (len != sizeof(bdaddr_t)) { + dev_err(&serdev->dev, "Invalid nvmem bd-address length\n"); + kfree(bdaddr); + return -EINVAL; + } + + /* As per the device tree bindings, the value from nvmem is + * expected to be MSB first, but in the kernel it is expected + * that bdaddr_t is LSB first. + */ + baswap(&lldev->bdaddr, bdaddr); + kfree(bdaddr); + } + return hci_uart_register_device(hu, &llp); } @@ -748,6 +842,7 @@ static void hci_ti_remove(struct serdev_device *serdev) } static const struct of_device_id hci_ti_of_match[] = { + { .compatible = "ti,cc2560" }, { .compatible = "ti,wl1271-st" }, { .compatible = "ti,wl1273-st" }, { .compatible = "ti,wl1281-st" }, diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c index bbd7db7384e6..05ec530b8a3a 100644 --- a/drivers/bluetooth/hci_qca.c +++ b/drivers/bluetooth/hci_qca.c @@ -932,6 +932,9 @@ static int qca_setup(struct hci_uart *hu) if (!ret) { set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags); qca_debugfs_init(hdev); + } else if (ret == -ENOENT) { + /* No patch/nvm-config found, run with original fw/config */ + ret = 0; } /* Setup bdaddr */ diff --git a/drivers/bluetooth/hci_serdev.c b/drivers/bluetooth/hci_serdev.c index 71664b22ec9d..e0e6461b9200 100644 --- a/drivers/bluetooth/hci_serdev.c +++ b/drivers/bluetooth/hci_serdev.c @@ -303,6 +303,7 @@ int hci_uart_register_device(struct hci_uart *hu, hci_set_drvdata(hdev, hu); INIT_WORK(&hu->write_work, hci_uart_write_work); + percpu_init_rwsem(&hu->proto_lock); /* Only when vendor specific setup callback is provided, consider * the manufacturer information valid. This avoids filling in the diff --git a/drivers/hv/ring_buffer.c b/drivers/hv/ring_buffer.c index 12eb8caa4263..50e071444a5c 100644 --- a/drivers/hv/ring_buffer.c +++ b/drivers/hv/ring_buffer.c @@ -140,6 +140,29 @@ static u32 hv_copyto_ringbuffer( return start_write_offset; } +/* + * + * hv_get_ringbuffer_availbytes() + * + * Get number of bytes available to read and to write to + * for the specified ring buffer + */ +static void +hv_get_ringbuffer_availbytes(const struct hv_ring_buffer_info *rbi, + u32 *read, u32 *write) +{ + u32 read_loc, write_loc, dsize; + + /* Capture the read/write indices before they changed */ + read_loc = READ_ONCE(rbi->ring_buffer->read_index); + write_loc = READ_ONCE(rbi->ring_buffer->write_index); + dsize = rbi->ring_datasize; + + *write = write_loc >= read_loc ? dsize - (write_loc - read_loc) : + read_loc - write_loc; + *read = dsize - *write; +} + /* Get various debug metrics for the specified ring buffer. */ void hv_ringbuffer_get_debuginfo(const struct hv_ring_buffer_info *ring_info, struct hv_ring_buffer_debug_info *debug_info) diff --git a/drivers/infiniband/hw/qedr/main.c b/drivers/infiniband/hw/qedr/main.c index 50812b33291b..a9c3378bca38 100644 --- a/drivers/infiniband/hw/qedr/main.c +++ b/drivers/infiniband/hw/qedr/main.c @@ -264,7 +264,7 @@ static int qedr_register_device(struct qedr_dev *dev) static int qedr_alloc_mem_sb(struct qedr_dev *dev, struct qed_sb_info *sb_info, u16 sb_id) { - struct status_block *sb_virt; + struct status_block_e4 *sb_virt; dma_addr_t sb_phys; int rc; diff --git a/drivers/infiniband/hw/qedr/qedr_hsi_rdma.h b/drivers/infiniband/hw/qedr/qedr_hsi_rdma.h index b7587f10e7de..78b49002fbd2 100644 --- a/drivers/infiniband/hw/qedr/qedr_hsi_rdma.h +++ b/drivers/infiniband/hw/qedr/qedr_hsi_rdma.h @@ -164,6 +164,13 @@ struct rdma_srq_sge { __le32 l_key; }; +/* Rdma doorbell data for flags update */ +struct rdma_pwm_flags_data { + __le16 icid; /* internal CID */ + u8 agg_flags; /* aggregative flags */ + u8 reserved; +}; + /* Rdma doorbell data for SQ and RQ */ struct rdma_pwm_val16_data { __le16 icid; @@ -180,12 +187,16 @@ struct rdma_pwm_val32_data { __le16 icid; u8 agg_flags; u8 params; -#define RDMA_PWM_VAL32_DATA_AGG_CMD_MASK 0x3 -#define RDMA_PWM_VAL32_DATA_AGG_CMD_SHIFT 0 -#define RDMA_PWM_VAL32_DATA_BYPASS_EN_MASK 0x1 -#define RDMA_PWM_VAL32_DATA_BYPASS_EN_SHIFT 2 -#define RDMA_PWM_VAL32_DATA_RESERVED_MASK 0x1F -#define RDMA_PWM_VAL32_DATA_RESERVED_SHIFT 3 +#define RDMA_PWM_VAL32_DATA_AGG_CMD_MASK 0x3 +#define RDMA_PWM_VAL32_DATA_AGG_CMD_SHIFT 0 +#define RDMA_PWM_VAL32_DATA_BYPASS_EN_MASK 0x1 +#define RDMA_PWM_VAL32_DATA_BYPASS_EN_SHIFT 2 +#define RDMA_PWM_VAL32_DATA_CONN_TYPE_IS_IWARP_MASK 0x1 +#define RDMA_PWM_VAL32_DATA_CONN_TYPE_IS_IWARP_SHIFT 3 +#define RDMA_PWM_VAL32_DATA_SET_16B_VAL_MASK 0x1 +#define RDMA_PWM_VAL32_DATA_SET_16B_VAL_SHIFT 4 +#define RDMA_PWM_VAL32_DATA_RESERVED_MASK 0x7 +#define RDMA_PWM_VAL32_DATA_RESERVED_SHIFT 5 __le32 value; }; @@ -478,23 +489,25 @@ struct rdma_sq_fmr_wqe { __le16 dif_app_tag_mask; __le16 dif_runt_crc_value; __le16 dif_flags; -#define RDMA_SQ_FMR_WQE_DIF_IO_DIRECTION_FLG_MASK 0x1 -#define RDMA_SQ_FMR_WQE_DIF_IO_DIRECTION_FLG_SHIFT 0 -#define RDMA_SQ_FMR_WQE_DIF_BLOCK_SIZE_MASK 0x1 -#define RDMA_SQ_FMR_WQE_DIF_BLOCK_SIZE_SHIFT 1 -#define RDMA_SQ_FMR_WQE_DIF_RUNT_VALID_FLG_MASK 0x1 -#define RDMA_SQ_FMR_WQE_DIF_RUNT_VALID_FLG_SHIFT 2 -#define RDMA_SQ_FMR_WQE_DIF_VALIDATE_CRC_GUARD_MASK 0x1 -#define RDMA_SQ_FMR_WQE_DIF_VALIDATE_CRC_GUARD_SHIFT 3 -#define RDMA_SQ_FMR_WQE_DIF_VALIDATE_REF_TAG_MASK 0x1 -#define RDMA_SQ_FMR_WQE_DIF_VALIDATE_REF_TAG_SHIFT 4 -#define RDMA_SQ_FMR_WQE_DIF_VALIDATE_APP_TAG_MASK 0x1 -#define RDMA_SQ_FMR_WQE_DIF_VALIDATE_APP_TAG_SHIFT 5 -#define RDMA_SQ_FMR_WQE_DIF_CRC_SEED_MASK 0x1 -#define RDMA_SQ_FMR_WQE_DIF_CRC_SEED_SHIFT 6 -#define RDMA_SQ_FMR_WQE_RESERVED4_MASK 0x1FF -#define RDMA_SQ_FMR_WQE_RESERVED4_SHIFT 7 - __le32 Reserved5; +#define RDMA_SQ_FMR_WQE_DIF_IO_DIRECTION_FLG_MASK 0x1 +#define RDMA_SQ_FMR_WQE_DIF_IO_DIRECTION_FLG_SHIFT 0 +#define RDMA_SQ_FMR_WQE_DIF_BLOCK_SIZE_MASK 0x1 +#define RDMA_SQ_FMR_WQE_DIF_BLOCK_SIZE_SHIFT 1 +#define RDMA_SQ_FMR_WQE_DIF_RUNT_VALID_FLG_MASK 0x1 +#define RDMA_SQ_FMR_WQE_DIF_RUNT_VALID_FLG_SHIFT 2 +#define RDMA_SQ_FMR_WQE_DIF_VALIDATE_CRC_GUARD_MASK 0x1 +#define RDMA_SQ_FMR_WQE_DIF_VALIDATE_CRC_GUARD_SHIFT 3 +#define RDMA_SQ_FMR_WQE_DIF_VALIDATE_REF_TAG_MASK 0x1 +#define RDMA_SQ_FMR_WQE_DIF_VALIDATE_REF_TAG_SHIFT 4 +#define RDMA_SQ_FMR_WQE_DIF_VALIDATE_APP_TAG_MASK 0x1 +#define RDMA_SQ_FMR_WQE_DIF_VALIDATE_APP_TAG_SHIFT 5 +#define RDMA_SQ_FMR_WQE_DIF_CRC_SEED_MASK 0x1 +#define RDMA_SQ_FMR_WQE_DIF_CRC_SEED_SHIFT 6 +#define RDMA_SQ_FMR_WQE_DIF_RX_REF_TAG_CONST_MASK 0x1 +#define RDMA_SQ_FMR_WQE_DIF_RX_REF_TAG_CONST_SHIFT 7 +#define RDMA_SQ_FMR_WQE_RESERVED4_MASK 0xFF +#define RDMA_SQ_FMR_WQE_RESERVED4_SHIFT 8 + __le32 reserved5; }; /* First element (16 bytes) of fmr wqe */ @@ -558,23 +571,25 @@ struct rdma_sq_fmr_wqe_3rd { __le16 dif_app_tag_mask; __le16 dif_runt_crc_value; __le16 dif_flags; -#define RDMA_SQ_FMR_WQE_3RD_DIF_IO_DIRECTION_FLG_MASK 0x1 -#define RDMA_SQ_FMR_WQE_3RD_DIF_IO_DIRECTION_FLG_SHIFT 0 -#define RDMA_SQ_FMR_WQE_3RD_DIF_BLOCK_SIZE_MASK 0x1 -#define RDMA_SQ_FMR_WQE_3RD_DIF_BLOCK_SIZE_SHIFT 1 -#define RDMA_SQ_FMR_WQE_3RD_DIF_RUNT_VALID_FLG_MASK 0x1 -#define RDMA_SQ_FMR_WQE_3RD_DIF_RUNT_VALID_FLG_SHIFT 2 -#define RDMA_SQ_FMR_WQE_3RD_DIF_VALIDATE_CRC_GUARD_MASK 0x1 -#define RDMA_SQ_FMR_WQE_3RD_DIF_VALIDATE_CRC_GUARD_SHIFT 3 -#define RDMA_SQ_FMR_WQE_3RD_DIF_VALIDATE_REF_TAG_MASK 0x1 -#define RDMA_SQ_FMR_WQE_3RD_DIF_VALIDATE_REF_TAG_SHIFT 4 -#define RDMA_SQ_FMR_WQE_3RD_DIF_VALIDATE_APP_TAG_MASK 0x1 -#define RDMA_SQ_FMR_WQE_3RD_DIF_VALIDATE_APP_TAG_SHIFT 5 -#define RDMA_SQ_FMR_WQE_3RD_DIF_CRC_SEED_MASK 0x1 -#define RDMA_SQ_FMR_WQE_3RD_DIF_CRC_SEED_SHIFT 6 -#define RDMA_SQ_FMR_WQE_3RD_RESERVED4_MASK 0x1FF -#define RDMA_SQ_FMR_WQE_3RD_RESERVED4_SHIFT 7 - __le32 Reserved5; +#define RDMA_SQ_FMR_WQE_3RD_DIF_IO_DIRECTION_FLG_MASK 0x1 +#define RDMA_SQ_FMR_WQE_3RD_DIF_IO_DIRECTION_FLG_SHIFT 0 +#define RDMA_SQ_FMR_WQE_3RD_DIF_BLOCK_SIZE_MASK 0x1 +#define RDMA_SQ_FMR_WQE_3RD_DIF_BLOCK_SIZE_SHIFT 1 +#define RDMA_SQ_FMR_WQE_3RD_DIF_RUNT_VALID_FLG_MASK 0x1 +#define RDMA_SQ_FMR_WQE_3RD_DIF_RUNT_VALID_FLG_SHIFT 2 +#define RDMA_SQ_FMR_WQE_3RD_DIF_VALIDATE_CRC_GUARD_MASK 0x1 +#define RDMA_SQ_FMR_WQE_3RD_DIF_VALIDATE_CRC_GUARD_SHIFT 3 +#define RDMA_SQ_FMR_WQE_3RD_DIF_VALIDATE_REF_TAG_MASK 0x1 +#define RDMA_SQ_FMR_WQE_3RD_DIF_VALIDATE_REF_TAG_SHIFT 4 +#define RDMA_SQ_FMR_WQE_3RD_DIF_VALIDATE_APP_TAG_MASK 0x1 +#define RDMA_SQ_FMR_WQE_3RD_DIF_VALIDATE_APP_TAG_SHIFT 5 +#define RDMA_SQ_FMR_WQE_3RD_DIF_CRC_SEED_MASK 0x1 +#define RDMA_SQ_FMR_WQE_3RD_DIF_CRC_SEED_SHIFT 6 +#define RDMA_SQ_FMR_WQE_3RD_DIF_RX_REF_TAG_CONST_MASK 0x1 +#define RDMA_SQ_FMR_WQE_3RD_DIF_RX_REF_TAG_CONST_SHIFT 7 +#define RDMA_SQ_FMR_WQE_3RD_RESERVED4_MASK 0xFF +#define RDMA_SQ_FMR_WQE_RESERVED4_SHIFT 8 + __le32 reserved5; }; struct rdma_sq_local_inv_wqe { @@ -606,20 +621,22 @@ struct rdma_sq_rdma_wqe { __le32 xrc_srq; u8 req_type; u8 flags; -#define RDMA_SQ_RDMA_WQE_COMP_FLG_MASK 0x1 -#define RDMA_SQ_RDMA_WQE_COMP_FLG_SHIFT 0 -#define RDMA_SQ_RDMA_WQE_RD_FENCE_FLG_MASK 0x1 -#define RDMA_SQ_RDMA_WQE_RD_FENCE_FLG_SHIFT 1 -#define RDMA_SQ_RDMA_WQE_INV_FENCE_FLG_MASK 0x1 -#define RDMA_SQ_RDMA_WQE_INV_FENCE_FLG_SHIFT 2 -#define RDMA_SQ_RDMA_WQE_SE_FLG_MASK 0x1 -#define RDMA_SQ_RDMA_WQE_SE_FLG_SHIFT 3 -#define RDMA_SQ_RDMA_WQE_INLINE_FLG_MASK 0x1 -#define RDMA_SQ_RDMA_WQE_INLINE_FLG_SHIFT 4 -#define RDMA_SQ_RDMA_WQE_DIF_ON_HOST_FLG_MASK 0x1 -#define RDMA_SQ_RDMA_WQE_DIF_ON_HOST_FLG_SHIFT 5 -#define RDMA_SQ_RDMA_WQE_RESERVED0_MASK 0x3 -#define RDMA_SQ_RDMA_WQE_RESERVED0_SHIFT 6 +#define RDMA_SQ_RDMA_WQE_COMP_FLG_MASK 0x1 +#define RDMA_SQ_RDMA_WQE_COMP_FLG_SHIFT 0 +#define RDMA_SQ_RDMA_WQE_RD_FENCE_FLG_MASK 0x1 +#define RDMA_SQ_RDMA_WQE_RD_FENCE_FLG_SHIFT 1 +#define RDMA_SQ_RDMA_WQE_INV_FENCE_FLG_MASK 0x1 +#define RDMA_SQ_RDMA_WQE_INV_FENCE_FLG_SHIFT 2 +#define RDMA_SQ_RDMA_WQE_SE_FLG_MASK 0x1 +#define RDMA_SQ_RDMA_WQE_SE_FLG_SHIFT 3 +#define RDMA_SQ_RDMA_WQE_INLINE_FLG_MASK 0x1 +#define RDMA_SQ_RDMA_WQE_INLINE_FLG_SHIFT 4 +#define RDMA_SQ_RDMA_WQE_DIF_ON_HOST_FLG_MASK 0x1 +#define RDMA_SQ_RDMA_WQE_DIF_ON_HOST_FLG_SHIFT 5 +#define RDMA_SQ_RDMA_WQE_READ_INV_FLG_MASK 0x1 +#define RDMA_SQ_RDMA_WQE_READ_INV_FLG_SHIFT 6 +#define RDMA_SQ_RDMA_WQE_RESERVED0_MASK 0x1 +#define RDMA_SQ_RDMA_WQE_RESERVED0_SHIFT 7 u8 wqe_size; u8 prev_wqe_size; struct regpair remote_va; diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 0936da592e12..944ec3c9282c 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -497,4 +497,15 @@ config THUNDERBOLT_NET source "drivers/net/hyperv/Kconfig" +config NETDEVSIM + tristate "Simulated networking device" + depends on DEBUG_FS + help + This driver is a developer testing tool and software model that can + be used to test various control path networking APIs, especially + HW-offload related. + + To compile this driver as a module, choose M here: the module + will be called netdevsim. + endif # NETDEVICES diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 766f62d02a0b..04c3b747812c 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -78,3 +78,4 @@ obj-$(CONFIG_FUJITSU_ES) += fjes/ thunderbolt-net-y += thunderbolt.o obj-$(CONFIG_THUNDERBOLT_NET) += thunderbolt-net.o +obj-$(CONFIG_NETDEVSIM) += netdevsim/ diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c index 8a9b085c2a98..58c705f24f96 100644 --- a/drivers/net/bonding/bond_options.c +++ b/drivers/net/bonding/bond_options.c @@ -1431,13 +1431,9 @@ static int bond_option_ad_actor_system_set(struct bonding *bond, { u8 macaddr[ETH_ALEN]; u8 *mac; - int i; if (newval->string) { - i = sscanf(newval->string, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", - &macaddr[0], &macaddr[1], &macaddr[2], - &macaddr[3], &macaddr[4], &macaddr[5]); - if (i != ETH_ALEN) + if (!mac_pton(newval->string, macaddr)) goto err; mac = macaddr; } else { diff --git a/drivers/net/caif/caif_hsi.c b/drivers/net/caif/caif_hsi.c index b8029ea03307..433a14b9f731 100644 --- a/drivers/net/caif/caif_hsi.c +++ b/drivers/net/caif/caif_hsi.c @@ -264,7 +264,6 @@ static int cfhsi_tx_frm(struct cfhsi_desc *desc, struct cfhsi *cfhsi) } /* Create payload CAIF frames. */ - pfrm = desc->emb_frm + CFHSI_MAX_EMB_FRM_SZ; while (nfrms < CFHSI_MAX_PKTS) { struct caif_payload_info *info; int hpad; diff --git a/drivers/net/can/c_can/c_can_pci.c b/drivers/net/can/c_can/c_can_pci.c index d065c0e2d18e..406b4847e5dc 100644 --- a/drivers/net/can/c_can/c_can_pci.c +++ b/drivers/net/can/c_can/c_can_pci.c @@ -251,14 +251,14 @@ static void c_can_pci_remove(struct pci_dev *pdev) pci_disable_device(pdev); } -static struct c_can_pci_data c_can_sta2x11= { +static const struct c_can_pci_data c_can_sta2x11= { .type = BOSCH_C_CAN, .reg_align = C_CAN_REG_ALIGN_32, .freq = 52000000, /* 52 Mhz */ .bar = 0, }; -static struct c_can_pci_data c_can_pch = { +static const struct c_can_pci_data c_can_pch = { .type = BOSCH_C_CAN, .reg_align = C_CAN_REG_32, .freq = 50000000, /* 50 MHz */ diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 365a8cc62405..cc94604b23e0 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -27,6 +27,7 @@ #include <linux/can/skb.h> #include <linux/can/netlink.h> #include <linux/can/led.h> +#include <linux/of.h> #include <net/rtnetlink.h> #define MOD_DESC "CAN device driver interface" @@ -814,6 +815,29 @@ int open_candev(struct net_device *dev) } EXPORT_SYMBOL_GPL(open_candev); +#ifdef CONFIG_OF +/* Common function that can be used to understand the limitation of + * a transceiver when it provides no means to determine these limitations + * at runtime. + */ +void of_can_transceiver(struct net_device *dev) +{ + struct device_node *dn; + struct can_priv *priv = netdev_priv(dev); + struct device_node *np = dev->dev.parent->of_node; + int ret; + + dn = of_get_child_by_name(np, "can-transceiver"); + if (!dn) + return; + + ret = of_property_read_u32(dn, "max-bitrate", &priv->bitrate_max); + if ((ret && ret != -EINVAL) || (!ret && !priv->bitrate_max)) + netdev_warn(dev, "Invalid value for transceiver max bitrate. Ignoring bitrate limit.\n"); +} +EXPORT_SYMBOL_GPL(of_can_transceiver); +#endif + /* * Common close function for cleanup before the device gets closed. * @@ -913,6 +937,13 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[], priv->bitrate_const_cnt); if (err) return err; + + if (priv->bitrate_max && bt.bitrate > priv->bitrate_max) { + netdev_err(dev, "arbitration bitrate surpasses transceiver capabilities of %d bps\n", + priv->bitrate_max); + return -EINVAL; + } + memcpy(&priv->bittiming, &bt, sizeof(bt)); if (priv->do_set_bittiming) { @@ -997,6 +1028,13 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[], priv->data_bitrate_const_cnt); if (err) return err; + + if (priv->bitrate_max && dbt.bitrate > priv->bitrate_max) { + netdev_err(dev, "canfd data bitrate surpasses transceiver capabilities of %d bps\n", + priv->bitrate_max); + return -EINVAL; + } + memcpy(&priv->data_bittiming, &dbt, sizeof(dbt)); if (priv->do_set_data_bittiming) { @@ -1064,6 +1102,7 @@ static size_t can_get_size(const struct net_device *dev) if (priv->data_bitrate_const) /* IFLA_CAN_DATA_BITRATE_CONST */ size += nla_total_size(sizeof(*priv->data_bitrate_const) * priv->data_bitrate_const_cnt); + size += sizeof(priv->bitrate_max); /* IFLA_CAN_BITRATE_MAX */ return size; } @@ -1121,7 +1160,11 @@ static int can_fill_info(struct sk_buff *skb, const struct net_device *dev) nla_put(skb, IFLA_CAN_DATA_BITRATE_CONST, sizeof(*priv->data_bitrate_const) * priv->data_bitrate_const_cnt, - priv->data_bitrate_const)) + priv->data_bitrate_const)) || + + (nla_put(skb, IFLA_CAN_BITRATE_MAX, + sizeof(priv->bitrate_max), + &priv->bitrate_max)) ) return -EMSGSIZE; diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 760d2c07e3a2..634c51e6b8ae 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -190,6 +190,7 @@ * MX53 FlexCAN2 03.00.00.00 yes no no no no * MX6s FlexCAN3 10.00.12.00 yes yes no no yes * VF610 FlexCAN3 ? no yes no yes yes? + * LS1021A FlexCAN2 03.00.04.00 no yes no no yes * * Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected. */ @@ -279,6 +280,10 @@ struct flexcan_priv { struct clk *clk_per; const struct flexcan_devtype_data *devtype_data; struct regulator *reg_xceiver; + + /* Read and Write APIs */ + u32 (*read)(void __iomem *addr); + void (*write)(u32 val, void __iomem *addr); }; static const struct flexcan_devtype_data fsl_p1010_devtype_data = { @@ -301,6 +306,12 @@ static const struct flexcan_devtype_data fsl_vf610_devtype_data = { FLEXCAN_QUIRK_BROKEN_PERR_STATE, }; +static const struct flexcan_devtype_data fsl_ls1021a_r2_devtype_data = { + .quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS | + FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_BROKEN_PERR_STATE | + FLEXCAN_QUIRK_USE_OFF_TIMESTAMP, +}; + static const struct can_bittiming_const flexcan_bittiming_const = { .name = DRV_NAME, .tseg1_min = 4, @@ -313,39 +324,45 @@ static const struct can_bittiming_const flexcan_bittiming_const = { .brp_inc = 1, }; -/* Abstract off the read/write for arm versus ppc. This - * assumes that PPC uses big-endian registers and everything - * else uses little-endian registers, independent of CPU - * endianness. +/* FlexCAN module is essentially modelled as a little-endian IP in most + * SoCs, i.e the registers as well as the message buffer areas are + * implemented in a little-endian fashion. + * + * However there are some SoCs (e.g. LS1021A) which implement the FlexCAN + * module in a big-endian fashion (i.e the registers as well as the + * message buffer areas are implemented in a big-endian way). + * + * In addition, the FlexCAN module can be found on SoCs having ARM or + * PPC cores. So, we need to abstract off the register read/write + * functions, ensuring that these cater to all the combinations of module + * endianness and underlying CPU endianness. */ -#if defined(CONFIG_PPC) -static inline u32 flexcan_read(void __iomem *addr) +static inline u32 flexcan_read_be(void __iomem *addr) { - return in_be32(addr); + return ioread32be(addr); } -static inline void flexcan_write(u32 val, void __iomem *addr) +static inline void flexcan_write_be(u32 val, void __iomem *addr) { - out_be32(addr, val); + iowrite32be(val, addr); } -#else -static inline u32 flexcan_read(void __iomem *addr) + +static inline u32 flexcan_read_le(void __iomem *addr) { - return readl(addr); + return ioread32(addr); } -static inline void flexcan_write(u32 val, void __iomem *addr) +static inline void flexcan_write_le(u32 val, void __iomem *addr) { - writel(val, addr); + iowrite32(val, addr); } -#endif static inline void flexcan_error_irq_enable(const struct flexcan_priv *priv) { struct flexcan_regs __iomem *regs = priv->regs; u32 reg_ctrl = (priv->reg_ctrl_default | FLEXCAN_CTRL_ERR_MSK); - flexcan_write(reg_ctrl, ®s->ctrl); + priv->write(reg_ctrl, ®s->ctrl); } static inline void flexcan_error_irq_disable(const struct flexcan_priv *priv) @@ -353,7 +370,7 @@ static inline void flexcan_error_irq_disable(const struct flexcan_priv *priv) struct flexcan_regs __iomem *regs = priv->regs; u32 reg_ctrl = (priv->reg_ctrl_default & ~FLEXCAN_CTRL_ERR_MSK); - flexcan_write(reg_ctrl, ®s->ctrl); + priv->write(reg_ctrl, ®s->ctrl); } static inline int flexcan_transceiver_enable(const struct flexcan_priv *priv) @@ -378,14 +395,14 @@ static int flexcan_chip_enable(struct flexcan_priv *priv) unsigned int timeout = FLEXCAN_TIMEOUT_US / 10; u32 reg; - reg = flexcan_read(®s->mcr); + reg = priv->read(®s->mcr); reg &= ~FLEXCAN_MCR_MDIS; - flexcan_write(reg, ®s->mcr); + priv->write(reg, ®s->mcr); - while (timeout-- && (flexcan_read(®s->mcr) & FLEXCAN_MCR_LPM_ACK)) + while (timeout-- && (priv->read(®s->mcr) & FLEXCAN_MCR_LPM_ACK)) udelay(10); - if (flexcan_read(®s->mcr) & FLEXCAN_MCR_LPM_ACK) + if (priv->read(®s->mcr) & FLEXCAN_MCR_LPM_ACK) return -ETIMEDOUT; return 0; @@ -397,14 +414,14 @@ static int flexcan_chip_disable(struct flexcan_priv *priv) unsigned int timeout = FLEXCAN_TIMEOUT_US / 10; u32 reg; - reg = flexcan_read(®s->mcr); + reg = priv->read(®s->mcr); reg |= FLEXCAN_MCR_MDIS; - flexcan_write(reg, ®s->mcr); + priv->write(reg, ®s->mcr); - while (timeout-- && !(flexcan_read(®s->mcr) & FLEXCAN_MCR_LPM_ACK)) + while (timeout-- && !(priv->read(®s->mcr) & FLEXCAN_MCR_LPM_ACK)) udelay(10); - if (!(flexcan_read(®s->mcr) & FLEXCAN_MCR_LPM_ACK)) + if (!(priv->read(®s->mcr) & FLEXCAN_MCR_LPM_ACK)) return -ETIMEDOUT; return 0; @@ -416,14 +433,14 @@ static int flexcan_chip_freeze(struct flexcan_priv *priv) unsigned int timeout = 1000 * 1000 * 10 / priv->can.bittiming.bitrate; u32 reg; - reg = flexcan_read(®s->mcr); + reg = priv->read(®s->mcr); reg |= FLEXCAN_MCR_HALT; - flexcan_write(reg, ®s->mcr); + priv->write(reg, ®s->mcr); - while (timeout-- && !(flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK)) + while (timeout-- && !(priv->read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK)) udelay(100); - if (!(flexcan_read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK)) + if (!(priv->read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK)) return -ETIMEDOUT; return 0; @@ -435,14 +452,14 @@ static int flexcan_chip_unfreeze(struct flexcan_priv *priv) unsigned int timeout = FLEXCAN_TIMEOUT_US / 10; u32 reg; - reg = flexcan_read(®s->mcr); + reg = priv->read(®s->mcr); reg &= ~FLEXCAN_MCR_HALT; |