aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/leds/trigger/ledtrig-tty.c11
-rw-r--r--drivers/tty/pty.c15
-rw-r--r--drivers/tty/serial/max310x.c29
-rw-r--r--drivers/tty/tty_io.c5
4 files changed, 13 insertions, 47 deletions
diff --git a/drivers/leds/trigger/ledtrig-tty.c b/drivers/leds/trigger/ledtrig-tty.c
index d2ab6ab080ac..f62db7e520b5 100644
--- a/drivers/leds/trigger/ledtrig-tty.c
+++ b/drivers/leds/trigger/ledtrig-tty.c
@@ -51,10 +51,8 @@ static ssize_t ttyname_store(struct device *dev,
if (size) {
ttyname = kmemdup_nul(buf, size, GFP_KERNEL);
- if (!ttyname) {
- ret = -ENOMEM;
- goto out_unlock;
- }
+ if (!ttyname)
+ return -ENOMEM;
} else {
ttyname = NULL;
}
@@ -69,7 +67,6 @@ static ssize_t ttyname_store(struct device *dev,
trigger_data->ttyname = ttyname;
-out_unlock:
mutex_unlock(&trigger_data->mutex);
if (ttyname && !running)
@@ -125,12 +122,12 @@ static void ledtrig_tty_work(struct work_struct *work)
if (icount.rx != trigger_data->rx ||
icount.tx != trigger_data->tx) {
- led_set_brightness(trigger_data->led_cdev, LED_ON);
+ led_set_brightness_sync(trigger_data->led_cdev, LED_ON);
trigger_data->rx = icount.rx;
trigger_data->tx = icount.tx;
} else {
- led_set_brightness(trigger_data->led_cdev, LED_OFF);
+ led_set_brightness_sync(trigger_data->led_cdev, LED_OFF);
}
out:
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 8b2797b6ee44..5e2374580e27 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -66,8 +66,7 @@ static void pty_close(struct tty_struct *tty, struct file *filp)
wake_up_interruptible(&tty->link->read_wait);
wake_up_interruptible(&tty->link->write_wait);
if (tty->driver->subtype == PTY_TYPE_MASTER) {
- struct file *f;
-
+ set_bit(TTY_OTHER_CLOSED, &tty->flags);
#ifdef CONFIG_UNIX98_PTYS
if (tty->driver == ptm_driver) {
mutex_lock(&devpts_mutex);
@@ -76,17 +75,7 @@ static void pty_close(struct tty_struct *tty, struct file *filp)
mutex_unlock(&devpts_mutex);
}
#endif
-
- /*
- * This hack is required because a program can open a
- * pty and redirect a console to it, but if the pty is
- * closed and the console is not released, then the
- * slave side will never close. So release the
- * redirect when the master closes.
- */
- f = tty_release_redirect(tty->link);
- if (f)
- fput(f);
+ tty_vhangup(tty->link);
}
}
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 9795b2e8b0b2..1b61d26bb7af 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -1056,9 +1056,9 @@ static int max310x_startup(struct uart_port *port)
max310x_port_update(port, MAX310X_MODE1_REG,
MAX310X_MODE1_TRNSCVCTRL_BIT, 0);
- /* Reset FIFOs */
- max310x_port_write(port, MAX310X_MODE2_REG,
- MAX310X_MODE2_FIFORST_BIT);
+ /* Configure MODE2 register & Reset FIFOs*/
+ val = MAX310X_MODE2_RXEMPTINV_BIT | MAX310X_MODE2_FIFORST_BIT;
+ max310x_port_write(port, MAX310X_MODE2_REG, val);
max310x_port_update(port, MAX310X_MODE2_REG,
MAX310X_MODE2_FIFORST_BIT, 0);
@@ -1086,27 +1086,8 @@ static int max310x_startup(struct uart_port *port)
/* Clear IRQ status register */
max310x_port_read(port, MAX310X_IRQSTS_REG);
- /*
- * Let's ask for an interrupt after a timeout equivalent to
- * the receiving time of 4 characters after the last character
- * has been received.
- */
- max310x_port_write(port, MAX310X_RXTO_REG, 4);
-
- /*
- * Make sure we also get RX interrupts when the RX FIFO is
- * filling up quickly, so get an interrupt when half of the RX
- * FIFO has been filled in.
- */
- max310x_port_write(port, MAX310X_FIFOTRIGLVL_REG,
- MAX310X_FIFOTRIGLVL_RX(MAX310X_FIFO_SIZE / 2));
-
- /* Enable RX timeout interrupt in LSR */
- max310x_port_write(port, MAX310X_LSR_IRQEN_REG,
- MAX310X_LSR_RXTO_BIT);
-
- /* Enable LSR, RX FIFO trigger, CTS change interrupts */
- val = MAX310X_IRQ_LSR_BIT | MAX310X_IRQ_RXFIFO_BIT | MAX310X_IRQ_TXEMPTY_BIT;
+ /* Enable RX, TX, CTS change interrupts */
+ val = MAX310X_IRQ_RXEMPTY_BIT | MAX310X_IRQ_TXEMPTY_BIT;
max310x_port_write(port, MAX310X_IRQEN_REG, val | MAX310X_IRQ_CTS_BIT);
return 0;
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 74733ec8f565..391bada4cedb 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -544,9 +544,7 @@ EXPORT_SYMBOL_GPL(tty_wakeup);
* @tty: tty device
*
* This is available to the pty code so if the master closes, if the
- * slave is a redirect it can release the redirect. It returns the
- * filp for the redirect, which must be fput when the operations on
- * the tty are completed.
+ * slave is a redirect it can release the redirect.
*/
struct file *tty_release_redirect(struct tty_struct *tty)
{
@@ -561,6 +559,7 @@ struct file *tty_release_redirect(struct tty_struct *tty)
return f;
}
+EXPORT_SYMBOL_GPL(tty_release_redirect);
/**
* __tty_hangup - actual handler for hangup events

Privacy Policy