aboutsummaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/cell/interrupt.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/cell/interrupt.h')
-rw-r--r--arch/powerpc/platforms/cell/interrupt.h97
1 files changed, 62 insertions, 35 deletions
diff --git a/arch/powerpc/platforms/cell/interrupt.h b/arch/powerpc/platforms/cell/interrupt.h
index 5560a92ec3ab..9ba1d3c17b4b 100644
--- a/arch/powerpc/platforms/cell/interrupt.h
+++ b/arch/powerpc/platforms/cell/interrupt.h
@@ -2,48 +2,76 @@
#define ASM_CELL_PIC_H
#ifdef __KERNEL__
/*
- * Mapping of IIC pending bits into per-node
- * interrupt numbers.
+ * Mapping of IIC pending bits into per-node interrupt numbers.
*
- * IRQ FF CC SS PP FF CC SS PP Description
+ * Interrupt numbers are in the range 0...0x1ff where the top bit
+ * (0x100) represent the source node. Only 2 nodes are supported with
+ * the current code though it's trivial to extend that if necessary using
+ * higher level bits
*
- * 00-3f 80 02 +0 00 - 80 02 +0 3f South Bridge
- * 00-3f 80 02 +b 00 - 80 02 +b 3f South Bridge
- * 41-4a 80 00 +1 ** - 80 00 +a ** SPU Class 0
- * 51-5a 80 01 +1 ** - 80 01 +a ** SPU Class 1
- * 61-6a 80 02 +1 ** - 80 02 +a ** SPU Class 2
- * 70-7f C0 ** ** 00 - C0 ** ** 0f IPI
+ * The bottom 8 bits are split into 2 type bits and 6 data bits that
+ * depend on the type:
*
- * F flags
- * C class
- * S source
- * P Priority
- * + node number
- * * don't care
+ * 00 (0x00 | data) : normal interrupt. data is (class << 4) | source
+ * 01 (0x40 | data) : IO exception. data is the exception number as
+ * defined by bit numbers in IIC_SR
+ * 10 (0x80 | data) : IPI. data is the IPI number (obtained from the priority)
+ * and node is always 0 (IPIs are per-cpu, their source is
+ * not relevant)
+ * 11 (0xc0 | data) : reserved
*
- * A node consists of a Cell Broadband Engine and an optional
- * south bridge device providing a maximum of 64 IRQs.
- * The south bridge may be connected to either IOIF0
- * or IOIF1.
- * Each SPE is represented as three IRQ lines, one per
- * interrupt class.
- * 16 IRQ numbers are reserved for inter processor
- * interruptions, although these are only used in the
- * range of the first node.
+ * In addition, interrupt number 0x80000000 is defined as always invalid
+ * (that is the node field is expected to never extend to move than 23 bits)
*
- * This scheme needs 128 IRQ numbers per BIF node ID,
- * which means that with the total of 512 lines
- * available, we can have a maximum of four nodes.
*/
enum {
- IIC_IRQ_INVALID = 0xff,
- IIC_IRQ_MAX = 0x3f,
- IIC_IRQ_EXT_IOIF0 = 0x20,
- IIC_IRQ_EXT_IOIF1 = 0x2b,
- IIC_IRQ_IPI0 = 0x40,
- IIC_NUM_IPIS = 0x10, /* IRQs reserved for IPI */
- IIC_SOURCE_COUNT = 0x50,
+ IIC_IRQ_INVALID = 0x80000000u,
+ IIC_IRQ_NODE_MASK = 0x100,
+ IIC_IRQ_NODE_SHIFT = 8,
+ IIC_IRQ_MAX = 0x1ff,
+ IIC_IRQ_TYPE_MASK = 0xc0,
+ IIC_IRQ_TYPE_NORMAL = 0x00,
+ IIC_IRQ_TYPE_IOEXC = 0x40,
+ IIC_IRQ_TYPE_IPI = 0x80,
+ IIC_IRQ_CLASS_SHIFT = 4,
+ IIC_IRQ_CLASS_0 = 0x00,
+ IIC_IRQ_CLASS_1 = 0x10,
+ IIC_IRQ_CLASS_2 = 0x20,
+ IIC_SOURCE_COUNT = 0x200,
+
+ /* Here are defined the various source/dest units. Avoid using those
+ * definitions if you can, they are mostly here for reference
+ */
+ IIC_UNIT_SPU_0 = 0x4,
+ IIC_UNIT_SPU_1 = 0x7,
+ IIC_UNIT_SPU_2 = 0x3,
+ IIC_UNIT_SPU_3 = 0x8,
+ IIC_UNIT_SPU_4 = 0x2,
+ IIC_UNIT_SPU_5 = 0x9,
+ IIC_UNIT_SPU_6 = 0x1,
+ IIC_UNIT_SPU_7 = 0xa,
+ IIC_UNIT_IOC_0 = 0x0,
+ IIC_UNIT_IOC_1 = 0xb,
+ IIC_UNIT_THREAD_0 = 0xe, /* target only */
+ IIC_UNIT_THREAD_1 = 0xf, /* target only */
+ IIC_UNIT_IIC = 0xe, /* source only (IO exceptions) */
+
+ /* Base numbers for the external interrupts */
+ IIC_IRQ_EXT_IOIF0 =
+ IIC_IRQ_TYPE_NORMAL | IIC_IRQ_CLASS_2 | IIC_UNIT_IOC_0,
+ IIC_IRQ_EXT_IOIF1 =
+ IIC_IRQ_TYPE_NORMAL | IIC_IRQ_CLASS_2 | IIC_UNIT_IOC_1,
+
+ /* Base numbers for the IIC_ISR interrupts */
+ IIC_IRQ_IOEX_TMI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 63,
+ IIC_IRQ_IOEX_PMI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 62,
+ IIC_IRQ_IOEX_ATI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 61,
+ IIC_IRQ_IOEX_MATBFI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 60,
+ IIC_IRQ_IOEX_ELDI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 59,
+
+ /* Which bits in IIC_ISR are edge sensitive */
+ IIC_ISR_EDGE_MASK = 0x4ul,
};
extern void iic_init_IRQ(void);
@@ -52,7 +80,6 @@ extern void iic_request_IPIs(void);
extern void iic_setup_cpu(void);
extern u8 iic_get_target_id(int cpu);
-extern struct irq_host *iic_get_irq_host(int node);
extern void spider_init_IRQ(void);

Privacy Policy