aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/ata
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/ahci_brcmstb.c6
-rw-r--r--drivers/ata/libata-core.c24
-rw-r--r--drivers/ata/libata-eh.c105
-rw-r--r--drivers/ata/libata-scsi.c21
-rw-r--r--drivers/ata/libata.h6
-rw-r--r--drivers/ata/sata_sx4.c16
6 files changed, 24 insertions, 154 deletions
diff --git a/drivers/ata/ahci_brcmstb.c b/drivers/ata/ahci_brcmstb.c
index ce1e3a885981..14b7305d2ba0 100644
--- a/drivers/ata/ahci_brcmstb.c
+++ b/drivers/ata/ahci_brcmstb.c
@@ -92,7 +92,7 @@ static inline u32 brcm_sata_readreg(void __iomem *addr)
* Other architectures (e.g., ARM) either do not support big endian, or
* else leave I/O in little endian mode.
*/
- if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
+ if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
return __raw_readl(addr);
else
return readl_relaxed(addr);
@@ -101,7 +101,7 @@ static inline u32 brcm_sata_readreg(void __iomem *addr)
static inline void brcm_sata_writereg(u32 val, void __iomem *addr)
{
/* See brcm_sata_readreg() comments */
- if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
+ if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
__raw_writel(val, addr);
else
writel_relaxed(val, addr);
@@ -209,6 +209,7 @@ static void brcm_sata_init(struct brcm_ahci_priv *priv)
priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
}
+#ifdef CONFIG_PM_SLEEP
static int brcm_ahci_suspend(struct device *dev)
{
struct ata_host *host = dev_get_drvdata(dev);
@@ -231,6 +232,7 @@ static int brcm_ahci_resume(struct device *dev)
brcm_sata_phys_enable(priv);
return ahci_platform_resume(dev);
}
+#endif
static struct scsi_host_template ahci_platform_sht = {
AHCI_SHT(DRV_NAME),
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index db5d9f79a247..19bcb80b2031 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -694,11 +694,11 @@ static int ata_rwcmd_protocol(struct ata_taskfile *tf, struct ata_device *dev)
* RETURNS:
* Block address read from @tf.
*/
-u64 ata_tf_read_block(const struct ata_taskfile *tf, struct ata_device *dev)
+u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev)
{
u64 block = 0;
- if (!dev || tf->flags & ATA_TFLAG_LBA) {
+ if (tf->flags & ATA_TFLAG_LBA) {
if (tf->flags & ATA_TFLAG_LBA48) {
block |= (u64)tf->hob_lbah << 40;
block |= (u64)tf->hob_lbam << 32;
@@ -2147,24 +2147,6 @@ static int ata_dev_config_ncq(struct ata_device *dev,
return 0;
}
-static void ata_dev_config_sense_reporting(struct ata_device *dev)
-{
- unsigned int err_mask;
-
- if (!ata_id_has_sense_reporting(dev->id))
- return;
-
- if (ata_id_sense_reporting_enabled(dev->id))
- return;
-
- err_mask = ata_dev_set_feature(dev, SETFEATURE_SENSE_DATA, 0x1);
- if (err_mask) {
- ata_dev_dbg(dev,
- "failed to enable Sense Data Reporting, Emask 0x%x\n",
- err_mask);
- }
-}
-
/**
* ata_dev_configure - Configure the specified ATA/ATAPI device
* @dev: Target device to configure
@@ -2387,7 +2369,7 @@ int ata_dev_configure(struct ata_device *dev)
dev->devslp_timing[i] = sata_setting[j];
}
}
- ata_dev_config_sense_reporting(dev);
+
dev->cdb_len = 16;
}
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 7465031a893c..cb0508af1459 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1592,8 +1592,6 @@ static int ata_eh_read_log_10h(struct ata_device *dev,
tf->hob_lbah = buf[10];
tf->nsect = buf[12];
tf->hob_nsect = buf[13];
- if (ata_id_has_ncq_autosense(dev->id))
- tf->auxiliary = buf[14] << 16 | buf[15] << 8 | buf[16];
return 0;
}
@@ -1630,70 +1628,6 @@ unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key)
}
/**
- * ata_eh_request_sense - perform REQUEST_SENSE_DATA_EXT
- * @dev: device to perform REQUEST_SENSE_SENSE_DATA_EXT to
- * @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long)
- * @dfl_sense_key: default sense key to use
- *
- * Perform REQUEST_SENSE_DATA_EXT after the device reported CHECK
- * SENSE. This function is EH helper.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- *
- * RETURNS:
- * encoded sense data on success, 0 on failure or if sense data
- * is not available.
- */
-static u32 ata_eh_request_sense(struct ata_queued_cmd *qc,
- struct scsi_cmnd *cmd)
-{
- struct ata_device *dev = qc->dev;
- struct ata_taskfile tf;
- unsigned int err_mask;
-
- if (!cmd)
- return 0;
-
- DPRINTK("ATA request sense\n");
- ata_dev_warn(dev, "request sense\n");
- if (!ata_id_sense_reporting_enabled(dev->id)) {
- ata_dev_warn(qc->dev, "sense data reporting disabled\n");
- return 0;
- }
- ata_tf_init(dev, &tf);
-
- tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
- tf.flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
- tf.command = ATA_CMD_REQ_SENSE_DATA;
- tf.protocol = ATA_PROT_NODATA;
-
- err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
- /*
- * ACS-4 states:
- * The device may set the SENSE DATA AVAILABLE bit to one in the
- * STATUS field and clear the ERROR bit to zero in the STATUS field
- * to indicate that the command returned completion without an error
- * and the sense data described in table 306 is available.
- *
- * IOW the 'ATA_SENSE' bit might not be set even though valid
- * sense data is available.
- * So check for both.
- */
- if ((tf.command & ATA_SENSE) ||
- tf.lbah != 0 || tf.lbam != 0 || tf.lbal != 0) {
- ata_scsi_set_sense(cmd, tf.lbah, tf.lbam, tf.lbal);
- qc->flags |= ATA_QCFLAG_SENSE_VALID;
- ata_dev_warn(dev, "sense data %02x/%02x/%02x\n",
- tf.lbah, tf.lbam, tf.lbal);
- } else {
- ata_dev_warn(dev, "request sense failed stat %02x emask %x\n",
- tf.command, err_mask);
- }
- return err_mask;
-}
-
-/**
* atapi_eh_request_sense - perform ATAPI REQUEST_SENSE
* @dev: device to perform REQUEST_SENSE to
* @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long)
@@ -1855,19 +1789,6 @@ void ata_eh_analyze_ncq_error(struct ata_link *link)
memcpy(&qc->result_tf, &tf, sizeof(tf));
qc->result_tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
qc->err_mask |= AC_ERR_DEV | AC_ERR_NCQ;
- if (qc->result_tf.auxiliary) {
- char sense_key, asc, ascq;
-
- sense_key = (qc->result_tf.auxiliary >> 16) & 0xff;
- asc = (qc->result_tf.auxiliary >> 8) & 0xff;
- ascq = qc->result_tf.auxiliary & 0xff;
- ata_dev_dbg(dev, "NCQ Autosense %02x/%02x/%02x\n",
- sense_key, asc, ascq);
- ata_scsi_set_sense(qc->scsicmd, sense_key, asc, ascq);
- ata_scsi_set_sense_information(qc->scsicmd, &qc->result_tf);
- qc->flags |= ATA_QCFLAG_SENSE_VALID;
- }
-
ehc->i.err_mask &= ~AC_ERR_DEV;
}
@@ -1897,27 +1818,6 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
return ATA_EH_RESET;
}
- /*
- * Sense data reporting does not work if the
- * device fault bit is set.
- */
- if ((stat & ATA_SENSE) && !(stat & ATA_DF) &&
- !(qc->flags & ATA_QCFLAG_SENSE_VALID)) {
- if (!(qc->ap->pflags & ATA_PFLAG_FROZEN)) {
- tmp = ata_eh_request_sense(qc, qc->scsicmd);
- if (tmp)
- qc->err_mask |= tmp;
- else
- ata_scsi_set_sense_information(qc->scsicmd, tf);
- } else {
- ata_dev_warn(qc->dev, "sense data available but port frozen\n");
- }
- }
-
- /* Set by NCQ autosense or request sense above */
- if (qc->flags & ATA_QCFLAG_SENSE_VALID)
- return 0;
-
if (stat & (ATA_ERR | ATA_DF))
qc->err_mask |= AC_ERR_DEV;
else
@@ -2661,15 +2561,14 @@ static void ata_eh_link_report(struct ata_link *link)
#ifdef CONFIG_ATA_VERBOSE_ERROR
if (res->command & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ |
- ATA_SENSE | ATA_ERR)) {
+ ATA_ERR)) {
if (res->command & ATA_BUSY)
ata_dev_err(qc->dev, "status: { Busy }\n");
else
- ata_dev_err(qc->dev, "status: { %s%s%s%s%s}\n",
+ ata_dev_err(qc->dev, "status: { %s%s%s%s}\n",
res->command & ATA_DRDY ? "DRDY " : "",
res->command & ATA_DF ? "DF " : "",
res->command & ATA_DRQ ? "DRQ " : "",
- res->command & ATA_SENSE ? "SENSE " : "",
res->command & ATA_ERR ? "ERR " : "");
}
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 641a61a59e89..0d7f0da3a269 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -270,28 +270,13 @@ DEVICE_ATTR(unload_heads, S_IRUGO | S_IWUSR,
ata_scsi_park_show, ata_scsi_park_store);
EXPORT_SYMBOL_GPL(dev_attr_unload_heads);
-void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq)
+static void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq)
{
- if (!cmd)
- return;
-
cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
scsi_build_sense_buffer(0, cmd->sense_buffer, sk, asc, ascq);
}
-void ata_scsi_set_sense_information(struct scsi_cmnd *cmd,
- const struct ata_taskfile *tf)
-{
- u64 information;
-
- if (!cmd)
- return;
-
- information = ata_tf_read_block(tf, NULL);
- scsi_set_sense_information(cmd->sense_buffer, information);
-}
-
static ssize_t
ata_scsi_em_message_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
@@ -1792,9 +1777,7 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
((cdb[2] & 0x20) || need_sense)) {
ata_gen_passthru_sense(qc);
} else {
- if (qc->flags & ATA_QCFLAG_SENSE_VALID) {
- cmd->result = SAM_STAT_CHECK_CONDITION;
- } else if (!need_sense) {
+ if (!need_sense) {
cmd->result = SAM_STAT_GOOD;
} else {
/* TODO: decide which descriptor format to use
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index a998a175f9f1..f840ca18a7c0 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -67,8 +67,7 @@ extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag);
extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
u64 block, u32 n_block, unsigned int tf_flags,
unsigned int tag);
-extern u64 ata_tf_read_block(const struct ata_taskfile *tf,
- struct ata_device *dev);
+extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev);
extern unsigned ata_exec_internal(struct ata_device *dev,
struct ata_taskfile *tf, const u8 *cdb,
int dma_dir, void *buf, unsigned int buflen,
@@ -138,9 +137,6 @@ extern int ata_scsi_add_hosts(struct ata_host *host,
struct scsi_host_template *sht);
extern void ata_scsi_scan_host(struct ata_port *ap, int sync);
extern int ata_scsi_offline_dev(struct ata_device *dev);
-extern void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq);
-extern void ata_scsi_set_sense_information(struct scsi_cmnd *cmd,
- const struct ata_taskfile *tf);
extern void ata_scsi_media_change_notify(struct ata_device *dev);
extern void ata_scsi_hotplug(struct work_struct *work);
extern void ata_schedule_scsi_eh(struct Scsi_Host *shost);
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 3a18a8a719b4..fab504fd9cfd 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -1238,8 +1238,12 @@ static unsigned int pdc20621_prog_dimm_global(struct ata_host *host)
readl(mmio + PDC_SDRAM_CONTROL);
/* Turn on for ECC */
- pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
- PDC_DIMM_SPD_TYPE, &spd0);
+ if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
+ PDC_DIMM_SPD_TYPE, &spd0)) {
+ pr_err("Failed in i2c read: device=%#x, subaddr=%#x\n",
+ PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE);
+ return 1;
+ }
if (spd0 == 0x02) {
data |= (0x01 << 16);
writel(data, mmio + PDC_SDRAM_CONTROL);
@@ -1380,8 +1384,12 @@ static unsigned int pdc20621_dimm_init(struct ata_host *host)
/* ECC initiliazation. */
- pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
- PDC_DIMM_SPD_TYPE, &spd0);
+ if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
+ PDC_DIMM_SPD_TYPE, &spd0)) {
+ pr_err("Failed in i2c read: device=%#x, subaddr=%#x\n",
+ PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE);
+ return 1;
+ }
if (spd0 == 0x02) {
void *buf;
VPRINTK("Start ECC initialization\n");

Privacy Policy