aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/eisa
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/eisa')
-rw-r--r--drivers/eisa/pci_eisa.c67
1 files changed, 46 insertions, 21 deletions
diff --git a/drivers/eisa/pci_eisa.c b/drivers/eisa/pci_eisa.c
index cdae207028a7..6c3fca97d346 100644
--- a/drivers/eisa/pci_eisa.c
+++ b/drivers/eisa/pci_eisa.c
@@ -19,10 +19,10 @@
/* There is only *one* pci_eisa device per machine, right ? */
static struct eisa_root_device pci_eisa_root;
-static int __init pci_eisa_init(struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static int __init pci_eisa_init(struct pci_dev *pdev)
{
- int rc;
+ int rc, i;
+ struct resource *res, *bus_res = NULL;
if ((rc = pci_enable_device (pdev))) {
printk (KERN_ERR "pci_eisa : Could not enable device %s\n",
@@ -30,9 +30,30 @@ static int __init pci_eisa_init(struct pci_dev *pdev,
return rc;
}
+ /*
+ * The Intel 82375 PCI-EISA bridge is a subtractive-decode PCI
+ * device, so the resources available on EISA are the same as those
+ * available on the 82375 bus. This works the same as a PCI-PCI
+ * bridge in subtractive-decode mode (see pci_read_bridge_bases()).
+ * We assume other PCI-EISA bridges are similar.
+ *
+ * eisa_root_register() can only deal with a single io port resource,
+ * so we use the first valid io port resource.
+ */
+ pci_bus_for_each_resource(pdev->bus, res, i)
+ if (res && (res->flags & IORESOURCE_IO)) {
+ bus_res = res;
+ break;
+ }
+
+ if (!bus_res) {
+ dev_err(&pdev->dev, "No resources available\n");
+ return -1;
+ }
+
pci_eisa_root.dev = &pdev->dev;
- pci_eisa_root.res = pdev->bus->resource[0];
- pci_eisa_root.bus_base_addr = pdev->bus->resource[0]->start;
+ pci_eisa_root.res = bus_res;
+ pci_eisa_root.bus_base_addr = bus_res->start;
pci_eisa_root.slots = EISA_MAX_SLOTS;
pci_eisa_root.dma_mask = pdev->dma_mask;
dev_set_drvdata(pci_eisa_root.dev, &pci_eisa_root);
@@ -45,22 +66,26 @@ static int __init pci_eisa_init(struct pci_dev *pdev,
return 0;
}
-static struct pci_device_id pci_eisa_pci_tbl[] = {
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_BRIDGE_EISA << 8, 0xffff00, 0 },
- { 0, }
-};
+/*
+ * We have to call pci_eisa_init_early() before pnpacpi_init()/isapnp_init().
+ * Otherwise pnp resource will get enabled early and could prevent eisa
+ * to be initialized.
+ * Also need to make sure pci_eisa_init_early() is called after
+ * x86/pci_subsys_init().
+ * So need to use subsys_initcall_sync with it.
+ */
+static int __init pci_eisa_init_early(void)
+{
+ struct pci_dev *dev = NULL;
+ int ret;
-static struct pci_driver __refdata pci_eisa_driver = {
- .name = "pci_eisa",
- .id_table = pci_eisa_pci_tbl,
- .probe = pci_eisa_init,
-};
+ for_each_pci_dev(dev)
+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_EISA) {
+ ret = pci_eisa_init(dev);
+ if (ret)
+ return ret;
+ }
-static int __init pci_eisa_init_module (void)
-{
- return pci_register_driver (&pci_eisa_driver);
+ return 0;
}
-
-device_initcall(pci_eisa_init_module);
-MODULE_DEVICE_TABLE(pci, pci_eisa_pci_tbl);
+subsys_initcall_sync(pci_eisa_init_early);

Privacy Policy