aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-11-01media: staging/imx: Use a shorter name for driverbr-v5.5oFabio Estevam1-2/+4
Currently v4l2-compliance tool returns the following output: Compliance test for imx-media-captu device /dev/video0: Driver Info: Driver name : imx-media-captu Card type : imx-media-capture ... The driver name string is limited to 16 characters, so provide a shorter name so that we can have a better output. While at it, use the same shorter name for driver and card. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-11-01staging: media: allegro-dvt: remove bool comparisonCristiane Naves1-1/+1
Bool tests don't need comparisons. Issue found by coccicheck. Signed-off-by: Cristiane Naves <cristianenavescardoso09@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-11-01media: s5p-jpeg: drop unused components from s5p_jpeg_q_dataPhilipp Zabel2-3/+0
The number of components are only set, and never used. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-11-01media: dt-bindings: rcar_vin: Document RZ/G1 per-board settingsGeert Uytterhoeven1-2/+2
The R-Car Gen2 per-board settings apply to RZ/G1, too. Fixes: 1d14a5eaa156b0b3 ("media: dt-bindings: media: rcar_vin: add device tree support for r8a774[35]") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-11-01media: fdp1: Fix R-Car M3-N naming in debug messageGeert Uytterhoeven1-1/+1
The official name is "R-Car M3-N", not "R-Car M3N". Fixes: 4e8c120de9268fc2 ("media: fdp1: Support M3N and E3 platforms") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-11-01bt819: Reduce amount of F* words in the worldAndy Shevchenko1-1/+1
Replace F* word with something less offensive. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [hverkuil: dropped 'Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")' tag since nothing was broken] Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-11-01media: coda: request to skip kernel mapping for decoded buffersLucas Stach1-0/+1
The kernel driver never touches the decoded buffers with the CPU. All accesses are either done by hardware DMA masters or userspace mapping the buffers. This means we don't need a kernel virtual address mapping for those buffers at all. As those buffers are usually quite large, we can save a good deal of kernel vmalloc space by requesting to not have a kernel mapping set up for them. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-11-01media: coda: fix deadlock between decoder picture run and start commandPhilipp Zabel1-2/+2
The BIT decoder picture run temporarily locks the bitstream mutex while the coda device mutex is locked, to refill the bitstream ring buffer. Consequently, the decoder start command, which locks both mutexes when flushing the bitstream ring buffer, must lock the coda device mutex first as well, to avoid an ABBA deadlock. Fixes: e7fd95849b3c ("media: coda: flush bitstream ring buffer on decoder restart") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-11-01v4l2-core: fix touch support in v4l_g_fmtVandana BN1-15/+18
v4l_s_fmt, for VFL_TYPE_TOUCH, sets unneeded members of the v4l2_pix_format structure to default values.This was missing in v4l_g_fmt, which would lead to failures in v4l2-compliance tests. Signed-off-by: Vandana BN <bnvandana@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-11-01media: v4l2-subdev: Don't use __u32 internallyJanusz Krzysztofik1-3/+3
Commit a8fa55078a77 ("media: v4l2-subdev: Verify arguments in v4l2_subdev_call()") and commit 374d62e7aa50 ("media: v4l2-subdev: Verify v4l2_subdev_call() pad config argument") introduced a few local functions, unfortunately with arguments of type __u32, reserved for use in Linux uAPI. Use u32 instead. Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-11-01media: exynos4-is: Fix recursive locking in isp_video_release()Seung-Woo Kim1-1/+1
From isp_video_release(), &isp->video_lock is held and subsequent vb2_fop_release() tries to lock vdev->lock which is same with the previous one. Replace vb2_fop_release() with _vb2_fop_release() to fix the recursive locking. Fixes: 1380f5754cb0 ("[media] videobuf2: Add missing lock held on vb2_fop_release") Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-11-01media: rcar_drif: fix a memory disclosureKangjie Lu1-0/+1
"f->fmt.sdr.reserved" is uninitialized. As other peer drivers like msi2500 and airspy do, the fix initializes it to avoid memory disclosures. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-11-01staging: media: cedrus: use devm_platform_ioremap_resource() to simplify codeYueHaibing1-3/+1
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-11-01media: rcar-csi2: Enable support for R8A774B1Biju Das1-0/+4
Add the MIPI CSI-2 driver support for RZ/G2N(R8A774B1) SoC. The CSI-2 module of RZ/G2N is similar to R-Car M3-N. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-11-01media: rcar-vin: Enable support for R8A774B1Biju Das1-0/+4
Add the SoC specific information for RZ/G2N(R8A774B1) SoC. The VIN module of RZ/G2N is similar to R-Car M3-N. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-11-01media: dt-bindings: rcar-csi2: Add R8A774B1 supportBiju Das1-0/+1
Add the compatible string for RZ/G2N (R8A774B1) to the list of supported SoCs. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-11-01media: dt-bindings: rcar-vin: Add R8A774B1 supportBiju Das1-0/+1
Document support for the VIN module in the Renesas RZ/G2N (R8A774B1) SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-11-01rcar-vin: Add support for outputting NV12Niklas Söderlund2-7/+37
Most Gen3 boards can output frames in NV12 format, add support for this with a runtime check that the running hardware supports it. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-11-01rcar-vin: Define which hardware supports NV12Niklas Söderlund2-0/+8
Most but not all Gen3 hardware support outputting NV12, add a flag to indicate which SoCs do support it. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-11-01rcar-vin: Do not enumerate unsupported pixel formatsNiklas Söderlund1-5/+15
If a pixel format is not supported by the hardware NULL is returned by rvin_format_from_pixel() for that fourcc. Verify that the pixel format is supported using this or skip it when enumerating. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-11-01media: radio: wl1273: fix interrupt masking on releaseJohan Hovold1-2/+1
If a process is interrupted while accessing the radio device and the core lock is contended, release() could return early and fail to update the interrupt mask. Note that the return value of the v4l2 release file operation is ignored. Fixes: 87d1a50ce451 ("[media] V4L2: WL1273 FM Radio: TI WL1273 FM radio driver") Cc: stable <stable@vger.kernel.org> # 2.6.38 Cc: Matti Aaltonen <matti.j.aaltonen@nokia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-11-01media: bdisp: fix memleak on releaseJohan Hovold1-2/+1
If a process is interrupted while accessing the video device and the device lock is contended, release() could return early and fail to free related resources. Note that the return value of the v4l2 release file operation is ignored. Fixes: 28ffeebbb7bd ("[media] bdisp: 2D blitter driver using v4l2 mem2mem framework") Cc: stable <stable@vger.kernel.org> # 4.2 Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-11-01media: v4l2-dv-timings: Use DIV_ROUND_CLOSEST directly to make it readablezhong jiang1-1/+1
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-10-30media: vpx3220: make array input_vals static, makes object smallerColin Ian King1-1/+1
Don't populate the array input_vals on the stack but instead make it static. Makes the object code smaller by 106 bytes. Before: text data bss dec hex filename 11744 3536 128 15408 3c30 drivers/media/i2c/vpx3220.o After: text data bss dec hex filename 11574 3600 128 15302 3bc6 drivers/media/i2c/vpx3220.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-10-30media: stkwebcam: fix runtime PM after driver unbindJohan Hovold1-2/+1
Since commit c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter") USB drivers must always balance their runtime PM gets and puts, including when the driver has already been unbound from the interface. Leaving the interface with a positive PM usage counter would prevent a later bound driver from suspending the device. Note that runtime PM has never actually been enabled for this driver since the support_autosuspend flag in its usb_driver struct is not set. Fixes: c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter") Cc: stable <stable@vger.kernel.org> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-10-30MAINTAINERS: Update MAX2175 & R-Car DRIF driver maintainer emailChris Paterson1-2/+2
Ramesh is now using a new email address. Update the maintainer entry for the MAX2175 SDR tuner and the Renesas R-Car DRIF drivers. Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Acked-by: Ramesh Shanmugasundaram <rashanmu@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-10-30media: xilinx: Use the correct style for SPDX License IdentifierNishad Kamdar4-4/+4
This patch corrects the SPDX License Identifier style in header files related to Video drivers for Xilinx devices. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-10-30media: imx7-mipi-csis: make array 'registers' static const, makes object smallerColin Ian King1-1/+1
Don't populate the array 'registers' on the stack but instead make it static const. Makes the object code smaller by 10 bytes. Before: text data bss dec hex filename 20138 5196 128 25462 6376 staging/media/imx/imx7-mipi-csis.o After: text data bss dec hex filename 20032 5292 128 25452 636c staging/media/imx/imx7-mipi-csis.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-10-30media: cx231xx: remove redundant assignment to variable statusColin Ian King1-1/+1
Variable status is being initialized with a value that is never read and is being re-assigned a later on. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2019-10-24media: sun4i: Add H3 deinterlace driverJernej Skrabec6-0/+1289
Allwinner H3 SoC contains deinterlace unit, which has several modes of operation - bypass, weave, bob and mixed (advanced) mode. I don't know how mixed mode works, but according to Allwinner it gives best results, so they use it exclusively. Currently this mode is also hardcoded here. For each interleaved frame queued, this driver produces 2 deinterlaced frames. Deinterlaced frames are based on 2 consequtive output buffers, except for the first 2, where same output buffer is given to peripheral as current and previous. There is no documentation for this core, so register layout and fixed values were taken from BSP driver. I'm not sure if maximum size of the image unit is capable to process is governed by size of "flag" buffers, frequency or it really is some HW limitation. Currently driver can process full HD image in ~15ms (7.5ms for each capture buffer), which allows to process 1920x1080@60i video smoothly in real time. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> [hverkuil-cisco@xs4all.nl: add static to deinterlace_ioctl_ops] Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: dt-bindings: media: Add Allwinner H3 Deinterlace bindingJernej Skrabec1-0/+76
Allwinner H3 Deinterlace core is used for deinterlacing interlaced video content. Core can also be found on some later SoCs, like H5 and R40. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: vimc: Implement debayer control for mean window sizeArthur Moraes do Lago3-21/+71
Add mean window size parameter for debayer filter as a control in vimc-debayer. vimc-debayer was patched to allow changing mean window parameter of the filter without needing to reload the driver. The parameter can now be set using a v4l2-ctl control(mean_window_size). Co-developed-by: Laís Pessine do Carmo <laispc19@gmail.com> Signed-off-by: Laís Pessine do Carmo <laispc19@gmail.com> Signed-off-by: Arthur Moraes do Lago <arthurmoraeslago@gmail.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: vimc: move the dev field of each entity to vimc_ent_devDafna Hirschfeld6-23/+21
Since the 'struct device *dev' field exists in each of the entity structs, it can be moved to the common struct vimc_ent_devevice. It is then used to replace 'pr_err' with 'dev_err' in the streamer code. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: vimc: embed the pads of entities in the entities' structsDafna Hirschfeld6-80/+25
since the pads array is of known small size, there is no reason to allocate it separately. Instead, it is embedded in the entity struct. This also conforms to the media controller doc: 'Most drivers will embed the pads array in a driver-specific structure, avoiding dynamic allocation.' Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> [hverkuil-cisco@xs4all.nl: remove unused vimc_pads_init()] Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: vimc: remove unused struct declaration vimc_platform_dataDafna Hirschfeld1-15/+0
the struct vimc_platform_data is not used anymore and can be removed. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: vimc: common: remove unused function 'vimc_pipeline_s_stream'Dafna Hirschfeld2-39/+0
The function 'vimc_pipeline_s_stream' is not used and can be removed. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: vimc: remove EXPORT_SYMBOL_GPL declarationsDafna Hirschfeld2-9/+0
vimc is a single kernel module and does not need to export any symbols therefore there is no need for these declarations. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: vimc: remove the helper function vimc_ent_sd_unregisterDafna Hirschfeld5-20/+3
since this function only calls v4l2_device_unregister_subdev, it is pointless. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: vimc: move media_entity_cleanup to release callbacksDafna Hirschfeld5-2/+4
according to the docs, this function must be called during the cleanup phase after unregistering the entity. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: vimc: sen: register subdevice only after initializationDafna Hirschfeld1-10/+10
vimc_sen_add function first registers the subdevice and then calls tpg_alloc. If tpg_alloc fails it unregisters the subdevice and then frees vsen, this cause double free since the release callback that follows subdevice unregistration also frees vsen. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: vimc: cleanup code that assigns entity in entities arrayDafna Hirschfeld1-4/+2
Since the add callback returns NULL on failure and the array is initialized to NULLs, there is no need for the intermediate assignment to local var. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: vimc: initialize vim entity pointers to NULLDafna Hirschfeld1-3/+2
since NULL value for vimc entity pointer indicates that entity creation failed and this is tested, the pointers should be initialized to NULL. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: imon: invalid dereference in imon_touch_eventSean Young1-2/+1
The touch timer is set up in intf1. If the second interface does not exist, the timer and touch input device are not setup and we get the following error, when touch events are reported via intf0. kernel BUG at kernel/time/timer.c:956! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc1+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__mod_timer kernel/time/timer.c:956 [inline] RIP: 0010:__mod_timer kernel/time/timer.c:949 [inline] RIP: 0010:mod_timer+0x5a2/0xb50 kernel/time/timer.c:1100 Code: 45 10 c7 44 24 14 ff ff ff ff 48 89 44 24 08 48 8d 45 20 48 c7 44 24 18 00 00 00 00 48 89 04 24 e9 5a fc ff ff e8 ae ce 0e 00 <0f> 0b e8 a7 ce 0e 00 4c 89 74 24 20 e9 37 fe ff ff e8 98 ce 0e 00 RSP: 0018:ffff8881db209930 EFLAGS: 00010006 RAX: ffffffff86c2b200 RBX: 00000000ffffa688 RCX: ffffffff83efc583 RDX: 0000000000000100 RSI: ffffffff812f4d82 RDI: ffff8881d2356200 RBP: ffff8881d23561e8 R08: ffffffff86c2b200 R09: ffffed103a46abeb R10: ffffed103a46abea R11: ffff8881d2355f53 R12: dffffc0000000000 R13: 1ffff1103b64132d R14: ffff8881d2355f50 R15: 0000000000000006 FS: 0000000000000000(0000) GS:ffff8881db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f75e2799000 CR3: 00000001d3b07000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> imon_touch_event drivers/media/rc/imon.c:1348 [inline] imon_incoming_packet.isra.0+0x2546/0x2f10 drivers/media/rc/imon.c:1603 usb_rx_callback_intf0+0x151/0x1e0 drivers/media/rc/imon.c:1734 __usb_hcd_giveback_urb+0x1f2/0x470 drivers/usb/core/hcd.c:1654 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1719 dummy_timer+0x120f/0x2fa2 drivers/usb/gadget/udc/dummy_hcd.c:1965 call_timer_fn+0x179/0x650 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5e3/0x1490 kernel/time/timer.c:1786 __do_softirq+0x221/0x912 kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x178/0x1a0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x12f/0x500 arch/x86/kernel/apic/apic.c:1137 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830 </IRQ> RIP: 0010:default_idle+0x28/0x2e0 arch/x86/kernel/process.c:581 Code: 90 90 41 56 41 55 65 44 8b 2d 44 3a 8f 7a 41 54 55 53 0f 1f 44 00 00 e8 36 ee d0 fb e9 07 00 00 00 0f 00 2d fa dd 4f 00 fb f4 <65> 44 8b 2d 20 3a 8f 7a 0f 1f 44 00 00 5b 5d 41 5c 41 5d 41 5e c3 RSP: 0018:ffffffff86c07da8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: 0000000000000007 RBX: ffffffff86c2b200 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffffffff86c2ba4c RBP: fffffbfff0d85640 R08: ffffffff86c2b200 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x3b6/0x500 kernel/sched/idle.c:263 cpu_startup_entry+0x14/0x20 kernel/sched/idle.c:355 start_kernel+0x82a/0x864 init/main.c:784 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 Modules linked in: Reported-by: syzbot+f49d12d34f2321cf4df2@syzkaller.appspotmail.com Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: tuners: Use the correct style for SPDX License IdentifierNishad Kamdar2-2/+2
This patch corrects the SPDX License Identifier style in header file related to media Drivers for Analog TV Tuners. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: smiapp: Rename update_mode as pll_blanking_updateSakari Ailus1-3/+3
Rename the confusingly named smiapp_update_mode() function as smiapp_pll_blanking_update(). The function is used to calculate new PLL and blanking configuration after binning or scaling configuration has been changed. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: smiapp: Register sensor after enabling runtime PM on the deviceSakari Ailus1-4/+8
Earlier it was possible that the parts of the driver that assumed runtime PM was enabled were being called before runtime PM was enabled in the driver's probe function. So enable runtime PM before registering the sub-device. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: smiapp: Use non-binned and binned limits correctlySakari Ailus1-7/+20
Use non-binned limits when binning is disabled and binned when they're enabled. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: smiapp: Don't update sensor configuration during power-on initSakari Ailus1-4/+0
The sensor configuration since it was previously powered off was not changed, so no need to update the PLL configuration etc. What is necessary though is to re-apply the configuration to the sensor's registers. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: smiapp: Move binning configuration to streaming startSakari Ailus1-21/+22
Only write the binning configuration at stream start. It has no effect otherwise. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24media: smiapp: Don't get binning limits dynamicallySakari Ailus1-65/+0
The driver implementation assumed the binning limits could change dynamically based on the binning configuration. This is not actually the case; these limits are static and suitable to be used with all binning configurations but possibly not optimal limit for many of those configurations. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Privacy Policy