aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2021-04-07cobalt: drop static for sd_fmtbr-v5.13afor-v5.13aHans Verkuil1-1/+1
The struct v4l2_subdev_format sd_fmt cannot be static since it can be written back by the subdev. Just have it on the stack. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2021-04-07media: sun8i-di: Fix runtime PM imbalance in deinterlace_start_streamingDinghao Liu1-1/+1
pm_runtime_get_sync() will increase the runtime PM counter even it returns an error. Thus a pairing decrement is needed to prevent refcount leak. Fix this by replacing this API with pm_runtime_resume_and_get(), which will not change the runtime PM counter on error. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2021-04-07media: platform: sti: Fix runtime PM imbalance in regs_showDinghao Liu1-1/+1
pm_runtime_get_sync() will increase the runtime PM counter even it returns an error. Thus a pairing decrement is needed to prevent refcount leak. Fix this by replacing this API with pm_runtime_resume_and_get(), which will not change the runtime PM counter on error. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2021-04-07media: imx-jpeg: Fix double free in mxc_jpeg_removeMirela Rabulea1-1/+0
The video_unregister_device already calls video_device_release, so remove video_device_release, to avoid a double free, when removing the module. This showed up in a repeated rmmod/insmod scenario. Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2021-04-07media: i2c: adv7842: fix possible use-after-free in adv7842_remove()Yang Yingliang1-1/+1
This driver's remove path calls cancel_delayed_work(). However, that function does not wait until the work function finishes. This means that the callback function may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling cancel_delayed_work_sync(), which ensures that the work is properly cancelled, no longer running, and unable to re-schedule itself. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2021-04-07media: i2c: tda1997: Fix possible use-after-free in tda1997x_remove()Yang Yingliang1-1/+1
This driver's remove path calls cancel_delayed_work(). However, that function does not wait until the work function finishes. This means that the callback function may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling cancel_delayed_work_sync(), which ensures that the work is properly cancelled, no longer running, and unable to re-schedule itself. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2021-04-07media: i2c: adv7511-v4l2: fix possible use-after-free in adv7511_remove()Yang Yingliang1-1/+1
This driver's remove path calls cancel_delayed_work(). However, that function does not wait until the work function finishes. This means that the callback function may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling cancel_delayed_work_sync(), which ensures that the work is properly cancelled, no longer running, and unable to re-schedule itself. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2021-04-07media: adv7604: fix possible use-after-free in adv76xx_remove()Yang Yingliang1-1/+1
This driver's remove path calls cancel_delayed_work(). However, that function does not wait until the work function finishes. This means that the callback function may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling cancel_delayed_work_sync(), which ensures that the work is properly cancelled, no longer running, and unable to re-schedule itself. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2021-04-07media: tc358743: fix possible use-after-free in tc358743_remove()Yang Yingliang1-1/+1
This driver's remove path calls cancel_delayed_work(). However, that function does not wait until the work function finishes. This means that the callback function may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling cancel_delayed_work_sync(), which ensures that the work is properly cancelled, no longer running, and unable to re-schedule itself. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2021-04-07MAINTAINERS: update ovti,ov2680.yaml referenceMauro Carvalho Chehab1-1/+1
The file name: Documentation/devicetree/bindings/media/i2c/ov2680.yaml should be, instead: Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml. Update its cross-reference accordingly. Fixes: 57226cd8c8bf ("media: dt-bindings: ov2680: convert bindings to yaml") Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-07MAINTAINERS: update imi,rdacm2x-gmsl.yaml referenceMauro Carvalho Chehab1-1/+1
The file name: Documentation/devicetree/bindings/media/i2c/rdacm2x-gmsl.yaml should be, instead: Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml. Update its cross-reference accordingly. Fixes: 34009bffc1c6 ("media: i2c: Add RDACM20 driver") Fixes: e9f817689789 ("media: dt-bindings: media: i2c: Add bindings for IMI RDACM2x") Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: s5p-mfc: Fix kernel-doc entries in s5p_mfc_common.hSylwester Nawrocki1-7/+16
Fixes scripts/kernel-doc warnings: s5p_mfc_common.h:343: warning: Function parameter or member 'fw_buf' not described in 's5p_mfc_dev' s5p_mfc_common.h:343: warning: Function parameter or member 'mem_size' not described in 's5p_mfc_dev' s5p_mfc_common.h:343: warning: Function parameter or member 'mem_base' not described in 's5p_mfc_dev' s5p_mfc_common.h:343: warning: Function parameter or member 'mem_bitmap' not described in 's5p_mfc_dev' s5p_mfc_common.h:343: warning: Function parameter or member 'mem_virt' not described in 's5p_mfc_dev' s5p_mfc_common.h:343: warning: Function parameter or member 'dma_base' not described in 's5p_mfc_dev' s5p_mfc_common.h:343: warning: Function parameter or member 'watchdog_timer' not described in 's5p_mfc_dev' s5p_mfc_common.h:343: warning: Function parameter or member 'fw_get_done' not described in 's5p_mfc_dev' s5p_mfc_common.h:343: warning: Function parameter or member 'risc_on' not described in 's5p_mfc_dev' s5p_mfc_common.h:714: warning: Function parameter or member 'src_bufs_cnt' not described in 's5p_mfc_ctx' s5p_mfc_common.h:714: warning: Function parameter or member 'dst_bufs_cnt' not described in 's5p_mfc_ctx' s5p_mfc_common.h:714: warning: Function parameter or member 'pb_count' not described in 's5p_mfc_ctx' s5p_mfc_common.h:714: warning: Function parameter or member 'force_frame_type' not described in 's5p_mfc_ctx' s5p_mfc_common.h:714: warning: Function parameter or member 'slice_mode' not described in 's5p_mfc_ctx' s5p_mfc_common.h:714: warning: Function parameter or member 'slice_size' not described in 's5p_mfc_ctx' s5p_mfc_common.h:714: warning: Function parameter or member 'frame_tag' not described in 's5p_mfc_ctx' s5p_mfc_common.h:714: warning: Function parameter or member 'scratch_buf_size' not described in 's5p_mfc_ctx' Reported-by: Hans verkuil <hverkuil@xs4all.nl> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: exynos4-is: Fix kernel-doc entries in fimc-is.hSylwester Nawrocki1-2/+19
Fixes scripts/kernel-doc warnings: fimc-is.h:286: warning: Function parameter or member 'fw' not described in 'fimc_is' fimc-is.h:286: warning: Function parameter or member 'memory' not described in 'fimc_is' fimc-is.h:286: warning: Function parameter or member 'f_w' not described in 'fimc_is' fimc-is.h:286: warning: Function parameter or member 'isp' not described in 'fimc_is' fimc-is.h:286: warning: Function parameter or member 'sensor' not described in 'fimc_is' fimc-is.h:286: warning: Function parameter or member 'setfile' not described in 'fimc_is' fimc-is.h:286: warning: Function parameter or member 'ctrl_handler' not described in 'fimc_is' fimc-is.h:286: warning: Function parameter or member 'irq' not described in 'fimc_is' fimc-is.h:286: warning: Function parameter or member 'sensor_index' not described in 'fimc_is' fimc-is.h:286: warning: Function parameter or member 'i2h_cmd' not described in 'fimc_is' fimc-is.h:286: warning: Function parameter or member 'h2i_cmd' not described in 'fimc_is' fimc-is.h:286: warning: Function parameter or member 'fd_header' not described in 'fimc_is' fimc-is.h:286: warning: Function parameter or member 'config' not described in 'fimc_is' fimc-is.h:286: warning: Function parameter or member 'config_index' not described in 'fimc_is' fimc-is.h:286: warning: Function parameter or member 'is_p_region' not described in 'fimc_is' fimc-is.h:286: warning: Function parameter or member 'is_dma_p_region' not described in 'fimc_is' fimc-is.h:286: warning: Function parameter or member 'is_shared_region' not described in 'fimc_is' fimc-is.h:286: warning: Function parameter or member 'af' not described in 'fimc_is' fimc-is.h:286: warning: Function parameter or member 'debugfs_entry' not described in 'fimc_is' The f_w field is unused so remove it. Reported-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: adv7511-v4l2: correctly report EDIDs of 1 blockHans Verkuil1-6/+6
If the EDID has an odd number of blocks (usually just 1, but the same problem occurs with 3 blocks), then VIDIOC_G_EDID reported 2 (or 4) blocks. Fix this. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: adv7604: support EDIDs up to 4 blocksHans Verkuil1-28/+61
While the adv7604/11/12 hardware supported EDIDs up to 4 blocks, the driver didn't. This patch adds support for this. It also improves support for EDIDs that do not have a Source Physical Address: in that case the spa location is set to the first byte of the second block, and the 'physical address' is just the two bytes at that location. This is per the suggestion in the adv76xx documentation for such EDIDs. Tested with an adv7604 and adv7612. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: adv7604: fix HPD support for adv7611/12Hans Verkuil1-2/+21
For the adv7604 the hotplug detect pin is controlled through gpio pins from the SoC, but the adv7611 and adv7612 control the hotplug detect pin themselves. But the driver had no support for this, so the HPD was always high, even when changing the EDID. Add proper support for this to the driver. Tested with an adv7612. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: rkvdec: Do not require all controls to be present in every requestDaniel Almeida2-48/+1
According to the v4l2 api, it is allowed to skip setting a control if its contents haven't changed for performance reasons: userspace should only update the controls that changed from last frame rather then updating them all. Still some ancient code that checks for mandatory controls has been left in this driver. Remove it. Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver") Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: VIDEO_IMX8_JPEG should depend on ARCH_MXC and not default to mGeert Uytterhoeven1-1/+1
The i.MX8 QXP/QM integrated JPEG encoder/decoder is only present on Freescale/NXP i.MX8 QXP and QM SoCs. Hence add a dependency on ARCH_MXC, to prevent asking the user about this driver when configuring a kernel without i.MX8 support. Drop the "default m" (which means "default y" if CONFIG_MODULES is not enabled), as merely enabling CONFIG_COMPILE_TEST should not enable additional code. Fixes: 2db16c6ed72ce644 ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: em28xx/em28xx.h: Remove duplicate struct declarationWan Jiabing1-2/+0
struct em28xx is declared at 219th line. The declaration here is unnecessary. Remove it. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: cx231xx/cx231xx.h: Remove repeated struct declarationWan Jiabing1-2/+0
struct cx231xx is declared at 146th line. The declaration here is unnecessary. Remove it. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: camss: csid: Remove redundant dev_err call in msm_csid_subdev_init()Yang Yingliang1-3/+1
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: camss: csiphy: Remove redundant dev_err call in msm_csiphy_subdev_init()Yang Yingliang1-6/+2
There is an error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: ti-vpe: sc: remove redundant dev_err call in sc_create()Yang Yingliang1-3/+1
There is an error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: ti-vpe: csc: remove redundant dev_err call in csc_create()Yang Yingliang1-3/+1
There is an error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: imx-pxp: remove redundant dev_err call in pxp_probe()Yang Yingliang1-5/+2
There is an error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: cec/core: clarify rx-arb-lost usage messageHans Verkuil2-2/+2
The rx-arb-lost error injection command only works with <op> set to 'any'. Explicitly say so in the usage message. Also use [] to indicate that the <poll> argument is optional. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: imx-pxp: Remove unneeded of_match_ptr()Fabio Estevam1-1/+1
i.MX is a DT-only platform, so of_match_ptr() can be safely removed. Remove the unneeded of_match_ptr(). Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: tw68: switch from 'pci_' to 'dma_' APIChristophe JAILLET3-3/+4
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'tw68_risc_buffer()' (tw68-risc.c) GFP_KERNEL can be used because this function is only called from a vb2_ops buf_prepare function. The call chain is: tw68_video_qops.buf_prepare (tw68-video.c) --> tw68_buf_prepare (tw68-video.c) --> tw68_risc_buffer @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: tw686x: switch from 'pci_' to 'dma_' APIChristophe JAILLET3-16/+16
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'tw686x_audio_dma_alloc()' (tw686x-audio.c) GFP_KERNEL can be used because it is only called from a probe function and no spinlock is taken in the between. The call chain is: tw686x_probe (tw686x-core.c) --> tw686x_audio_init (tw686x-audio.c) --> tw686x_audio_dma_alloc (tw686x-audio.c) When memory is allocated in 'tw686x_memcpy_dma_alloc()' and in 'tw686x_sg_dma_alloc()' (tw686x-video.c) GFP_KERNEL can be used because these functions are .alloc functions from a tw686x_dma_ops structure. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: cx23885: switch from 'pci_' to 'dma_' APIChristophe JAILLET2-6/+9
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'cx23885_risc_buffer()' GFP_KERNEL can be used because this function is only called from a vb2_ops buf_prepare function. The call chain is: cx23885_video_qops.buf_prepare (cx23885-video.c) --> buffer_prepare (cx23885-video.c) --> cx23885_risc_buffer When memory is allocated in 'cx23885_risc_databuffer()' GFP_KERNEL can be used because this function is only called from a function that already uses GFP_KERNEL or from a vb2_ops buf_prepare function. The call chains are: snd_cx23885_hw_params (cx23885-alsa.c) --> use GFP_KERNEL --> cx23885_risc_databuffer cx23885_qops.buffer_prepare (cx23885-417.c) or dvb_qops.buffer_prepare (cx23885-dvb.c) --> cx23885_buf_prepare --> cx23885_risc_databuffer When memory is allocated in 'cx23885_risc_vbibuffer()' GFP_KERNEL can be used because this function is only called from a vb2_ops buf_prepare function. The call chains are: cx23885_vbi_qops.buffer_prepare (cx23885-vbi.c) --> cx23885_risc_vbibuffer @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: mtk-vcodec: Separating mtk encoder driverIrui Wang5-110/+67
MTK H264 Encoder(VENC_SYS) and VP8 Encoder(VENC_LT_SYS) are two independent hardware instance. They have their owner interrupt, register mapping, and special clocks. This patch separates them into two devices. This is a preparing patch for adding device_link between the larbs and venc-device. It's mainly for fixing the problem: https://lkml.org/lkml/2019/9/3/316 Acked-by: Tiffany Lin <tiffany.lin@mediatek.com> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: Maoguang Meng <maoguang.meng@mediatek.com> Signed-off-by: Irui Wang <irui.wang@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: dt-bindings: media: mtk-vcodec: Separating mtk vcodec encoder nodeIrui Wang1-26/+29
Updates binding document since the avc and vp8 hardware encoder in MT8173 are now separated. Separate "mediatek,mt8173-vcodec-enc" to "mediatek,mt8173-vcodec-enc-vp8" and "mediatek,mt8173-vcodec-enc". This patch is not a compatible change, but we must do this modifaction because MediaTek IOMMU add the device_link between the smi-larb device and venc_device, if the venc device call the pm_runtime_get_sync, the smi-larb's pm_runtime_get_sync also be called automatically. There is a bit of backward compatibility for avc encoder, the avc encoder device node still has compatible "mediatek,mt8173-vcodec-enc". Acked-by: Tiffany Lin <tiffany.lin@mediatek.com> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: Maoguang Meng <maoguang.meng@mediatek.com> Signed-off-by: Irui Wang <irui.wang@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: v4l2-ctrls.c: fix race condition in hdl->requests listHans Verkuil1-3/+14
When a request is re-inited it will release all control handler objects that are still in the request. It does that by unbinding and putting all those objects. When the object is unbound the obj->req pointer is set to NULL, and the object's unbind op is called. When the object it put the object's release op is called to free the memory. For a request object that contains a control handler that means that v4l2_ctrl_handler_free() is called in the release op. A control handler used in a request has a pointer to the main control handler that is created by the driver and contains the current state of all controls. If the device is unbound (due to rmmod or a forced unbind), then that main handler is freed, again by calling v4l2_ctrl_handler_free(), and any outstanding request objects that refer to that main handler have to be unbound and put as well. It does that by this test: if (!hdl->req_obj.req && !list_empty(&hdl->requests)) { I.e. the handler has no pointer to a request, so is the main handler, and one or more request objects refer to this main handler. However, this test is wrong since hdl->req_obj.req is actually NULL when re-initing a request (the object unbind will set req to NULL), and the only reason this seemingly worked is that the requests list is typically empty since the request's unbind op will remove the handler from the requests list. But if another thread is at the same time adding a new control to a request, then there is a race condition where one thread is removing a control handler object from the requests list and another thread is adding one. The result is that hdl->requests is no longer empty and the code thinks that a main handler is being freed instead of a control handler that is part of a request. There are two bugs here: first the test for hdl->req_obj.req: this should be hdl->req_obj.ops since only the main control handler will have a NULL pointer there. The second is that adding or deleting request objects from the requests list of the main handler isn't protected by taking the main handler's lock. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: John Cox <jc@kynesim.co.uk> Fixes: 6fa6f831f095 ("media: v4l2-ctrls: add core request support") Tested-by: John Cox <jc@kynesim.co.uk> Reported-by: John Cox <jc@kynesim.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: vivid: add read-only int32 controlHans Verkuil3-4/+20
This read-only int32 control is used to test read-only controls in combination with requests. It is set by the driver to the buffer sequence counter module 256. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: venus: vdec: Fix decoder cmd STOP issueStanimir Varbanov2-2/+5
Fixes an issue when issuing a stop command to the controller, negating the following firmware error. "SFR message from FW: Exception: TID = Unknown IP = 0x3b7dc FA = 0x0 cause = 0x6" Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: venus: helper: Decide work modeDikshita Agarwal4-4/+31
Decide work mode for encoder and decoder based on different use-cases. Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: venus: hfi: Increase plat_buf_v6 o/p buffer count.Dikshita Agarwal1-1/+1
Presently, minimum buffer count for output buffers for h264 & hevc codec is kept as 8 which might not be sufficient for few use cases so increasing the value to 18. Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: venus: helpers, hfi, vdec: Set actual plane constraints to FWDikshita Agarwal4-0/+42
Set actual plane alignments to FW with HFI_PROPERTY_PARAM_UNCOMPRESSED_PLANE_ACTUAL_CONSTRAINTS_INFO to calculate correct buffer size. bod: Fixed fall-through error in pkt_session_set_property_6xx() switch Ensure setting format constraints on 6xx only Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: venus: helpers: Add internal buffer list for v6Dikshita Agarwal3-6/+20
- Internal buffers required by v6 are different than v4, add new list of internal buffers for v6. - Differentiate encoder/decoder buffers for 6xx Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: venus: firmware: Do not toggle WRAPPER_A9SS_SW_RESET on 6xxDikshita Agarwal1-3/+5
Do not toggle the WRAPPER_A9SS_SW_RESET on 6xx. Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: venus: pm: Toggle 6xx wrapper power in vcodec_controlDikshita Agarwal1-1/+4
When in vcodec_control_v4() on the 4xx path we select between one of two vcodec cores to toggle power control bits. In 6xx there is only one core which offsets the relevant control registers to a slightly different address. This patch accounts for the address offset for 6xx silicon. Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Co-developed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: venus: hfi: Add 6xx AXI halt logicDikshita Agarwal1-0/+32
This patch takes the downstream AXI halt routine and applies it when IS_V6() is true. bod: Converted to readl_poll_timeout() Removed poll timeout for LPI register, testing showed the value would always timeout and work, so the polling did nothing of value. Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Co-developed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: venus: core,pm: Vote for min clk freq during venus bootDikshita Agarwal1-0/+14
Vote for min clk frequency for core clks during prepare and enable clocks at boot sequence. Without this the controller clock runs at very low value (9.6MHz) which is not sufficient to boot venus. Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: venus: pm: Hook 6xx pm ops into 4xx pm opsBryan O'Donoghue1-0/+1
At this time there is no need to differentiate between the two, we can reuse the 4xx pm ops callback structure for 6xx. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: venus: hfi, vdec: v6 Add IS_V6() to existing IS_V4() if locationsBryan O'Donoghue3-8/+7
In various places in the venus codebase we have if (IS_V4()) which takes the code down paths for 4xx silicon. This logic is broadly applicable to 6xx silicon also. In this patch we add IS_V6() to various IS_V4() decision locations. Co-developed-by: Dikshita Agarwal <dikshita@qti.qualcomm.com> Signed-off-by: Dikshita Agarwal <dikshita@qti.qualcomm.com> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: venus: hfi: Read WRAPPER_TZ_CPU_STATUS_V6 on 6xxBryan O'Donoghue1-2/+10
On 6xx we should read wrapper cpu status from the wrapper TZ register set. Co-developed-by: Jonathan Marek <jonathan@marek.ca> Signed-off-by: Jonathan Marek <jonathan@marek.ca> Co-developed-by: Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: venus: hfi: Add 6xx interrupt supportDikshita Agarwal1-9/+23
This commit adds 6xx specific interrupt support, some register offsets and bitmasks differ from 4xx, which we account for in this commit. [bod: Added commit log. Moved register definition into commit] Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Co-developed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: venus: hfi: Add a 6xx boot logicDikshita Agarwal1-2/+12
This patch adds a 6xx specific boot logic. The goal is to share as much code as possible between 3xx, 4xx and 6xx silicon. We need to do a different write to WRAPPER_INTR_MASK with an additional write to CPU_CS_H2XSOFTINTEN_V6 and CPU_CS_X2RPMh_V6. The other writes are the same for 6xx and non-6xx silicon albeit at different absolute relative locations to the base of the venus address space. Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: venus: core: Hook to V6 base registers when appropriateBryan O'Donoghue1-7/+17
This commit points the IO base registers 6xx offsets when probing for 6xx hardware. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: venus: core: Add an io base for AON regsBryan O'Donoghue2-0/+3
6xx silicon needs to access registers from a AON base address range. This commit defines the necessary variable for later use. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Privacy Policy