AgeCommit message (Collapse)AuthorFilesLines
2014-10-09Merge branch 'patchwork' into v4l_for_linusmedia/v3.18-rc1Mauro Carvalho Chehab475-13052/+36215
* patchwork: (544 commits) [media] ir-hix5hd2: fix build on c6x arch [media] pt3: fix DTV FE I2C driver load error paths Revert "[media] media: em28xx - remove reset_resume interface" [media] exynos4-is: fix some warnings when compiling on arm64 [media] usb drivers: use %zu instead of %zd [media] pci drivers: use %zu instead of %zd [media] dvb-frontends: use %zu instead of %zd [media] s5p-mfc: Fix several printk warnings [media] s5p_mfc_opr: Fix warnings [media] ti-vpe: Fix typecast [media] s3c-camif: fix dma_addr_t printks [media] s5p_mfc_opr_v6: get rid of warnings when compiled with 64 bits [media] s5p_mfc_opr_v5: Fix lots of warnings on x86_64 [media] em28xx: Fix identation [media] drxd: remove a dead code [media] saa7146: remove return after BUG() [media] cx88: remove return after BUG() [media] cx88: fix cards table CodingStyle [media] radio-sf16fmr2: declare some structs as static [media] radio-sf16fmi: declare pnp_attached as static ... Conflicts: Documentation/DocBook/media/v4l/compat.xml
2014-10-09[media] ir-hix5hd2: fix build on c6x archMauro Carvalho Chehab1-0/+3
While not all archs have readl_relaxed, we need to add a hack at the driver to allow it to COMPILE_TEST on all archs: drivers/media/rc/ir-hix5hd2.c: In function ‘hix5hd2_ir_config’: drivers/media/rc/ir-hix5hd2.c:100:2: error: implicit declaration of function ‘readl_relaxed’ [-Werror=implicit-function-declaration] Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-05Linux 3.17v3.17Linus Torvalds1-1/+1
2014-10-05Merge tag 'scsi-fixes' of ↵Linus Torvalds4-7/+62
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of two small fixes, both to code which went in during the merge window: cxgb4i has a scheduling in atomic bug in its new ipv6 code and uas fails to work properly with the new scsi-mq code" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] uas: disable use of blk-mq I/O path [SCSI] cxgb4i: avoid holding mutex in interrupt context
2014-10-04Merge tag 'tiny/kconfig-for-3.17' of ↵Linus Torvalds1-0/+3
https://git.kernel.org/pub/scm/linux/kernel/git/josh/linux Pull kconfig fixes for tiny setups from Josh Triplett: "Two Kconfig bugfixes for 3.17 related to tinification. These fixes make the Kconfig "General Setup" menu much more usable" * tag 'tiny/kconfig-for-3.17' of https://git.kernel.org/pub/scm/linux/kernel/git/josh/linux: init/Kconfig: Fix HAVE_FUTEX_CMPXCHG to not break up the EXPERT menu init/Kconfig: Hide printk log config if CONFIG_PRINTK=n
2014-10-03init/Kconfig: Fix HAVE_FUTEX_CMPXCHG to not break up the EXPERT menuJosh Triplett1-0/+1
commit 03b8c7b623c80af264c4c8d6111e5c6289933666 ("futex: Allow architectures to skip futex_atomic_cmpxchg_inatomic() test") added the HAVE_FUTEX_CMPXCHG symbol right below FUTEX. This placed it right in the middle of the options for the EXPERT menu. However, HAVE_FUTEX_CMPXCHG does not depend on EXPERT or FUTEX, so Kconfig stops placing items in the EXPERT menu, and displays the remaining several EXPERT items (starting with EPOLL) directly in the General Setup menu. Since both users of HAVE_FUTEX_CMPXCHG only select it "if FUTEX", make HAVE_FUTEX_CMPXCHG itself depend on FUTEX. With this change, the subsequent items display as part of the EXPERT menu again; the EMBEDDED menu now appears as the next top-level item in the General Setup menu, which makes General Setup much shorter and more usable. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Cc: stable <stable@vger.kernel.org>
2014-10-03init/Kconfig: Hide printk log config if CONFIG_PRINTK=nJosh Triplett1-0/+2
The buffers sized by CONFIG_LOG_BUF_SHIFT and CONFIG_LOG_CPU_MAX_BUF_SHIFT do not exist if CONFIG_PRINTK=n, so don't ask about their size at all. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Cc: stable <stable@vger.kernel.org>
2014-10-03Merge branch 'i2c/for-current' of ↵Linus Torvalds2-5/+9
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Two i2c driver bugfixes" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: qup: Fix order of runtime pm initialization i2c: rk3x: fix 0 length write transfers
2014-10-03Merge tag 'trace-fixes-v3.17-rc7' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull trace ring buffer iterator fix from Steven Rostedt: "While testing some new changes for 3.18, I kept hitting a bug every so often in the ring buffer. At first I thought it had to do with some of the changes I was working on, but then testing something else I realized that the bug was in 3.17 itself. I ran several bisects as the bug was not very reproducible, and finally came up with the commit that I could reproduce easily within a few minutes, and without the change I could run the tests over an hour without issue. The change fit the bug and I figured out a fix. That bad commit was: Commit 651e22f2701b "ring-buffer: Always reset iterator to reader page" This commit fixed a bug, but in the process created another one. It used the wrong value as the cached value that is used to see if things changed while an iterator was in use. This made it look like a change always happened, and could cause the iterator to go into an infinite loop" * tag 'trace-fixes-v3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ring-buffer: Fix infinite spin in reading buffer
2014-10-03Merge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds3-8/+4
Pull cifs/smb3 fixes from Steve French: "Fix for CIFS/SMB3 oops on reconnect during readpages (3.17 regression) and for incorrectly closing file handle in symlink error cases" * 'for-linus' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Fix readpages retrying on reconnects Fix problem recognizing symlinks
2014-10-03Merge tag 'md/3.17-final-fix' of git://neil.brown.name/mdLinus Torvalds1-1/+17
Pull raid5 discard fix from Neil Brown: "One fix for raid5 discard issue" * tag 'md/3.17-final-fix' of git://neil.brown.name/md: md/raid5: disable 'DISCARD' by default due to safety concerns.
2014-10-03Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds8-62/+65
Pull drm fixes from Dave Airlie: "Nothing too major or scary. One i915 regression fix, nouveau has a tmds regression fix, along with a regression fix for the runtime pm code for optimus laptops not restoring the display hw correctly" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau: make sure display hardware is reinitialised on runtime resume drm/nouveau: punt fbcon resume out to a workqueue drm/nouveau: fix regression on original nv50 board drm/nv50/disp: fix dpms regression on certain boards drm/i915: Flush the PTEs after updating them before suspend
2014-10-03[SCSI] uas: disable use of blk-mq I/O pathChristoph Hellwig1-0/+7
The uas driver uses the block layer tag for USB3 stream IDs. With blk-mq we can get larger tag numbers that the queue depth, which breaks this assumption. A fix is under way for 3.18, but sits on top of large changes so can't easily be backported. Set the disable_blk_mq path so that a uas device can't easily crash the system when using blk-mq for SCSI. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-10-02Merge tag 'pm+acpi-3.17-final' of ↵Linus Torvalds4-11/+18
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: "These are three regression fixes (cpufreq core, pcc-cpufreq, i915 / ACPI) and one trivial fix for a callback return value mismatch in the cpufreq integrator driver. Specifics: - A recent cpufreq core fix went too far and introduced a regression in the system suspend code path. Fix from Viresh Kumar. - An ACPI-related commit in the i915 driver that fixed backlight problems for some Thinkpads inadvertently broke a Dell machine (in 3.16). Fix from Aaron Lu. - The pcc-cpufreq driver was broken during the 3.15 cycle by a commit that put wait_event() under a spinlock by mistake. Fix that (Rafael J Wysocki). - The return value type of integrator_cpufreq_remove() is void, but should be int. Fix from Arnd Bergmann" * tag 'pm+acpi-3.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: update 'cpufreq_suspended' after stopping governors ACPI / i915: Update the condition to ignore firmware backlight change request cpufreq: integrator: fix integrator_cpufreq_remove return type cpufreq: pcc-cpufreq: Fix wait_event() under spinlock
2014-10-03Merge tag 'drm-intel-fixes-2014-10-02' of ↵Dave Airlie1-1/+13
git://anongit.freedesktop.org/drm-intel into drm-fixes final regression fix for 3.17. * tag 'drm-intel-fixes-2014-10-02' of git://anongit.freedesktop.org/drm-intel: drm/i915: Flush the PTEs after updating them before suspend
2014-10-03i2c: qup: Fix order of runtime pm initializationAndy Gross1-4/+8
The runtime pm calls need to be done before populating the children via the i2c_add_adapter call. If this is not done, a child can run into issues trying to do i2c read/writes due to the pm_runtime_sync failing. Signed-off-by: Andy Gross <agross@codeaurora.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2014-10-03i2c: rk3x: fix 0 length write transfersAlexandru M Stan1-1/+1
i2cdetect -q was broken (everything was a false positive, and no transfers were actually being sent over i2c). The way it works is by sending a 0 length write request and checking for NACK. This patch fixes the 0 length writes and actually sends them. Reported-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Alexandru M Stan <amstan@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Tested-by: Max Schwarz <max.schwarz@online.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2014-10-03Merge branches 'pm-cpufreq' and 'acpi-video'Rafael J. Wysocki4-11/+18
* pm-cpufreq: cpufreq: update 'cpufreq_suspended' after stopping governors cpufreq: integrator: fix integrator_cpufreq_remove return type cpufreq: pcc-cpufreq: Fix wait_event() under spinlock * acpi-video: ACPI / i915: Update the condition to ignore firmware backlight change request
2014-10-02Merge branch 'akpm' (fixes from Andrew Morton)Linus Torvalds6-13/+45
Merge fixes from Andrew Morton: "5 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: page_alloc: fix zone allocation fairness on UP perf: fix perf bug in fork() MAINTAINERS: change git URL for mpc5xxx tree mm: memcontrol: do not iterate uninitialized memcgs ocfs2/dlm: should put mle when goto kill in dlm_assert_master_handler
2014-10-02mm: page_alloc: fix zone allocation fairness on UPJohannes Weiner1-4/+3
The zone allocation batches can easily underflow due to higher-order allocations or spills to remote nodes. On SMP that's fine, because underflows are expected from concurrency and dealt with by returning 0. But on UP, zone_page_state will just return a wrapped unsigned long, which will get past the <= 0 check and then consider the zone eligible until its watermarks are hit. Commit 3a025760fc15 ("mm: page_alloc: spill to remote nodes before waking kswapd") already made the counter-resetting use atomic_long_read() to accomodate underflows from remote spills, but it didn't go all the way with it. Make it clear that these batches are expected to go negative regardless of concurrency, and use atomic_long_read() everywhere. Fixes: 81c0a2bb515f ("mm: page_alloc: fair zone allocator policy") Reported-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-02perf: fix perf bug in fork()Peter Zijlstra2-3/+6
Oleg noticed that a cleanup by Sylvain actually uncovered a bug; by calling perf_event_free_task() when failing sched_fork() we will not yet have done the memset() on ->perf_event_ctxp[] and will therefore try and 'free' the inherited contexts, which are still in use by the parent process. This is bad.. Suggested-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Sylvain 'ythier' Hitier <sylvain.hitier@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-02MAINTAINERS: change git URL for mpc5xxx treeAnatolij Gustschin1-1/+1
The repository for mpc5xxx has been moved, update git URL to new location. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-02mm: memcontrol: do not iterate uninitialized memcgsJohannes Weiner1-5/+31
The cgroup iterators yield css objects that have not yet gone through css_online(), but they are not complete memcgs at this point and so the memcg iterators should not return them. Commit d8ad30559715 ("mm/memcg: iteration skip memcgs not yet fully initialized") set out to implement exactly this, but it uses CSS_ONLINE, a cgroup-internal flag that does not meet the ordering requirements for memcg, and so the iterator may skip over initialized groups, or return partially initialized memcgs. The cgroup core can not reasonably provide a clear answer on whether the object around the css has been fully initialized, as that depends on controller-specific locking and lifetime rules. Thus, introduce a memcg-specific flag that is set after the memcg has been initialized in css_online(), and read before mem_cgroup_iter() callers access the memcg members. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-02ocfs2/dlm: should put mle when goto kill in dlm_assert_master_handleralex chen1-0/+4
In dlm_assert_master_handler, the mle is get in dlm_find_mle, should be put when goto kill, otherwise, this mle will never be released. Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: joyce.xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-02Merge tag 'media/v3.17-rc8' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fix from Mauro Carvalho Chehab: "One last time regression fix at em28xx. The removal of .reset_resume broke suspend/resume on this driver for some devices. There are more fixes to be done for em28xx suspend/resume to be better handled, but I'm opting to let them to stay for a while at the media devel tree, in order to get more tests. So, for now, let's just revert this patch" * tag 'media/v3.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: Revert "[media] media: em28xx - remove reset_resume interface"
2014-10-02ring-buffer: Fix infinite spin in reading bufferSteven Rostedt (Red Hat)1-1/+1
Commit 651e22f2701b "ring-buffer: Always reset iterator to reader page" fixed one bug but in the process caused another one. The reset is to update the header page, but that fix also changed the way the cached reads were updated. The cache reads are used to test if an iterator needs to be updated or not. A ring buffer iterator, when created, disables writes to the ring buffer but does not stop other readers or consuming reads from happening. Although all readers are synchronized via a lock, they are only synchronized when in the ring buffer functions. Those functions may be called by any number of readers. The iterator continues down when its not interrupted by a consuming reader. If a consuming read occurs, the iterator starts from the beginning of the buffer. The way the iterator sees that a consuming read has happened since its last read is by checking the reader "cache". The cache holds the last counts of the read and the reader page itself. Commit 651e22f2701b changed what was saved by the cache_read when the rb_iter_reset() occurred, making the iterator never match the cache. Then if the iterator calls rb_iter_reset(), it will go into an infinite loop by checking if the cache doesn't match, doing the reset and retrying, just to see that the cache still doesn't match! Which should never happen as the reset is suppose to set the cache to the current value and there's locks that keep a consuming reader from having access to the data. Fixes: 651e22f2701b "ring-buffer: Always reset iterator to reader page" Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-10-02Merge branch 'parisc-3.17-8' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fix from Helge Deller: "One late but trivial patch to fix the serial console on parisc machines which got broken during the 3.17 release cycle" * 'parisc-3.17-8' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix serial console for machines with serial port on superio chip
2014-10-02CIFS: Fix readpages retrying on reconnectsPavel Shilovsky1-7/+1
If we got a reconnect error from async readv we re-add pages back to page_list and continue loop. That is wrong because these pages have been already added to the pagecache but page_list has pages that have not been added to the pagecache yet. This ends up with a general protection fault in put_pages after readpages. Fix it by not retrying the read of these pages and falling back to readpage instead. Fixes debian bug 762306 Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com> Tested-by: Arthur Marsh <arthur.marsh@internode.on.net>
2014-10-02Fix problem recognizing symlinksSteve French2-1/+3
Changeset eb85d94bd introduced a problem where if a cifs open fails during query info of a file we will still try to close the file (happens with certain types of reparse points) even though the file handle is not valid. In addition for SMB2/SMB3 we were not mapping the return code returned by Windows when trying to open a file (like a Windows NFS symlink) which is a reparse point. Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org> CC: stable <stable@vger.kernel.org> #v3.13+
2014-10-02Merge branch 'numa-migration-fixes' (fixes from Mel Gorman)Linus Torvalds2-3/+9
Merge NUMA balancing related fixlets from Mel Gorman: "There were a few minor changes so am resending just the two patches that are mostly likely to affect the bug Dave and Sasha saw and marked them for stable. I'm less confident it will address Sasha's problem because while I have not kept up to date, I believe he's also seeing memory corruption issues in next from an unknown source. Still, it would be nice to see how they affect trinity testing. I'll send the MPOL_MF_LAZY patch separately because it's not urgent" * emailed patches from Mel Gorman <mgorman@suse.de>: mm: numa: Do not mark PTEs pte_numa when splitting huge pages mm: migrate: Close race between migration completion and mprotect
2014-10-02mm: numa: Do not mark PTEs pte_numa when splitting huge pagesMel Gorman1-2/+5
This patch reverts 1ba6e0b50b ("mm: numa: split_huge_page: transfer the NUMA type from the pmd to the pte"). If a huge page is being split due a protection change and the tail will be in a PROT_NONE vma then NUMA hinting PTEs are temporarily created in the protected VMA. VM_RW|VM_PROTNONE |-----------------| ^ split here In the specific case above, it should get fixed up by change_pte_range() but there is a window of opportunity for weirdness to happen. Similarly, if a huge page is shrunk and split during a protection update but before pmd_numa is cleared then a pte_numa can be left behind. Instead of adding complexity trying to deal with the case, this patch will not mark PTEs NUMA when splitting a huge page. NUMA hinting faults will not be triggered which is marginal in comparison to the complexity in dealing with the corner cases during THP split. Cc: stable@vger.kernel.org Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-02mm: migrate: Close race between migration completion and mprotectMel Gorman1-1/+4
A migration entry is marked as write if pte_write was true at the time the entry was created. The VMA protections are not double checked when migration entries are being removed as mprotect marks write-migration-entries as read. It means that potentially we take a spurious fault to mark PTEs write again but it's straight-forward. However, there is a race between write migrations being marked read and migrations finishing. This potentially allows a PTE to be write that should have been read. Close this race by double checking the VMA permissions using maybe_mkwrite when migration completes. [torvalds@linux-foundation.org: use maybe_mkwrite] Cc: stable@vger.kernel.org Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-02Merge tag 'sound-3.17' of ↵Linus Torvalds6-15/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just a few pending bits of random fixes in ASoC. Nothing exciting, but would be nice to be merged in 3.17, as most of them are also for stable kernels" * tag 'sound-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: ssm2602: do not hardcode type to SSM2602 ASoC: core: fix possible ZERO_SIZE_PTR pointer dereferencing error. MAINTAINERS: add atmel audio alsa driver maintainer entry ASoC: rt286: Fix sync function ASoC: rt286: Correct default value ASoC: soc-compress: fix double unlock of fe card mutex ASoC: fsl_ssi: fix kernel panic in probe function
2014-10-02Merge branch 'linux-3.17' of ↵Dave Airlie7-61/+52
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes A few regression fixes, the runpm ones dating back to 3.15. Also a fairly severe TMDS regression that effected a lot of GF8/9/GT2xx users. * 'linux-3.17' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: make sure display hardware is reinitialised on runtime resume drm/nouveau: punt fbcon resume out to a workqueue drm/nouveau: fix regression on original nv50 board drm/nv50/disp: fix dpms regression on certain boards
2014-10-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds31-134/+217
Pull networking fixes from David Miller: 1) Don't halt the firmware in r8152 driver, from Hayes Wang. 2) Handle full sized 802.1ad frames in bnx2 and tg3 drivers properly, from Vlad Yasevich. 3) Don't sleep while holding tx_clean_lock in netxen driver, fix from Manish Chopra. 4) Certain kinds of ipv6 routes can end up endlessly failing the route validation test, causing it to be re-looked up over and over again. This particularly kills input route caching in TCP sockets. Fix from Hannes Frederic Sowa. 5) netvsc_start_xmit() has a use-after-free access to skb->len, fix from K Y Srinivasan. 6) Fix matching of inverted containers in ematch module, from Ignacy Gawędzki. 7) Aggregation of GRO frames via SKB ->frag_list for linear skbs isn't handled properly, regression fix from Eric Dumazet. 8) Don't test return value of ipv4_neigh_lookup(), which returns an error pointer, against NULL. From WANG Cong. 9) Fix an old regression where we mistakenly allow a double add of the same tunnel. Fixes from Steffen Klassert. 10) macvtap device delete and open can run in parallel and corrupt lists etc., fix from Vlad Yasevich. 11) Fix build error with IPV6=m NETFILTER_XT_TARGET_TPROXY=y, from Pablo Neira Ayuso. 12) rhashtable_destroy() triggers lockdep splats, fix also from Pablo. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (32 commits) bna: Update Maintainer Email r8152: disable power cut for RTL8153 r8152: remove clearing bp bnx2: Correctly receive full sized 802.1ad fragmes tg3: Allow for recieve of full-size 8021AD frames r8152: fix setting RTL8152_UNPLUG netxen: Fix bug in Tx completion path. netxen: Fix BUG "sleeping function called from invalid context" ipv6: remove rt6i_genid hyperv: Fix a bug in netvsc_start_xmit() net: stmmac: fix stmmac_pci_probe failed when CONFIG_HAVE_CLK is selected ematch: Fix matching of inverted containers. gro: fix aggregation for skb using frag_list neigh: check error pointer instead of NULL for ipv4_neigh_lookup() ip6_gre: Return an error when adding an existing tunnel. ip6_vti: Return an error when adding an existing tunnel. ip6_tunnel: Return an error when adding an existing tunnel. ip6gre: add a rtnl link alias for ip6gretap net/mlx4_core: Allow not to specify probe_vf in SRIOV IB mode r8152: fix the carrier off when autoresuming ...
2014-10-02md/raid5: disable 'DISCARD' by default due to safety concerns.NeilBrown1-1/+17
It has come to my attention (thanks Martin) that 'discard_zeroes_data' is only a hint. Some devices in some cases don't do what it says on the label. The use of DISCARD in RAID5 depends on reads from discarded regions being predictably zero. If a write to a previously discarded region performs a read-modify-write cycle it assumes that the parity block was consistent with the data blocks. If all were zero, this would be the case. If some are and some aren't this would not be the case. This could lead to data corruption after a device failure when data needs to be reconstructed from the parity. As we cannot trust 'discard_zeroes_data', ignore it by default and so disallow DISCARD on all raid4/5/6 arrays. As many devices are trustworthy, and as there are benefits to using DISCARD, add a module parameter to over-ride this caution and cause DISCARD to work if discard_zeroes_data is set. If a site want to enable DISCARD on some arrays but not on others they should select DISCARD support at the filesystem level, and set the raid456 module parameter. raid456.devices_handle_discard_safely=Y As this is a data-safety issue, I believe this patch is suitable for -stable. DISCARD support for RAID456 was added in 3.7 Cc: Shaohua Li <shli@kernel.org> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Heinz Mauelshagen <heinzm@redhat.com> Cc: stable@vger.kernel.org (3.7+) Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Fixes: 620125f2bf8ff0c4969b79653b54d7bcc9d40637 Signed-off-by: NeilBrown <neilb@suse.de>
2014-10-02drm/nouveau: make sure display hardware is reinitialised on runtime resumeBen Skeggs3-53/+26
Linus commit 05c63c2ff23a80b654d6c088ac3ba21628db0173 modified the runtime suspend/resume paths to skip over display-related tasks to avoid locking issues on resume. Unfortunately, this resulted in the display hardware being left in a partially initialised state, preventing subsequent modesets from completing. This commit unifies the (many) suspend/resume paths, bringing back display (and fbcon) handling in the runtime paths. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-10-02drm/nouveau: punt fbcon resume out to a workqueueBen Skeggs2-6/+18
Preparation for some runtime pm fixes. Currently we skip over fbcon suspend/resume in the runtime path, which causes issues on resume if fbcon tries to write to the framebuffer before the BAR subdev has been resumed to restore the BAR1 VM setup. As we might be woken up via a sysfs connector, we are unable to call fb_set_suspend() in the resume path as it could make its way down to a modeset and cause all sorts of locking hilarity. To solve this, we'll just delay the fbcon resume to a workqueue. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-10-02drm/nouveau: fix regression on original nv50 boardBen Skeggs1-1/+6
Xorg (and any non-DRM client really) doesn't have permission to directly touch VRAM on nv50 and up, which the fence code prior to g84 depends on. It's less invasive to temporarily grant it premission to do so, as it previously did, than it is to rework fencenv50 to use the VM. That will come later on. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-10-02drm/nv50/disp: fix dpms regression on certain boardsBen Skeggs1-1/+2
Reported in fdo#82527 comment #2. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-10-01bna: Update Maintainer EmailRasesh Mody1-1/+1
Update the maintainer email for BNA driver. Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01Merge branch 'r8152'David S. Miller1-28/+2
Hayes Wang says: ==================== r8152: patches about firmware The patches fix the issues when the firmware exists. For the multiple OS, the firmware may be loaded by the driver of the other OS. And the Linux driver has influences on it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8152: disable power cut for RTL8153hayeswang1-1/+1
The firmware would be clear when the power cut is enabled for RTL8153. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8152: remove clearing bphayeswang1-27/+1
The xxx_clear_bp() is used to halt the firmware. It only necessary for updating the new firmware. Besides, depend on the version of the current firmware, it may have problem to halt the firmware directly. Finally, halt the firmware would let the firmware code useless, and the bugs which are fixed by the firmware would occur. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01bnx2: Correctly receive full sized 802.1ad fragmesVlad Yasevich1-2/+3
This driver, similar to tg3, has a check that will cause full sized 802.1ad frames to be dropped. The frame will be larger then the standard mtu due to the presense of vlan header that has not been stripped. The driver should not drop this frame and should process it just like it does for 802.1q. CC: Sony Chacko <sony.chacko@qlogic.com> CC: Dept-HSGLinuxNICDev@qlogic.com Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01tg3: Allow for recieve of full-size 8021AD framesVlad Yasevich1-1/+2
When receiving a vlan-tagged frame that still contains a vlan header, the length of the packet will be greater then MTU+ETH_HLEN since it will account of the extra vlan header. TG3 checks this for the case for 802.1Q, but not for 802.1ad. As a result, full sized 802.1ad frames get dropped by the card. Add a check for 802.1ad protocol when receving full sized frames. Suggested-by: Prashant Sreedharan <prashant@broadcom.com> CC: Prashant Sreedharan <prashant@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01Merge branch 'for-3.17' of git://linux-nfs.org/~bfields/linuxLinus Torvalds1-1/+2
Pull nfsd bugfix from Bruce Fields: "This fixes a data corruption bug introduced by the v3.16 xdr encoding rewrite. I haven't managed to reproduce it myself yet, but it's apparently not hard to hit given the right workload" * 'for-3.17' of git://linux-nfs.org/~bfields/linux: nfsd4: fix corruption of NFSv4 read data
2014-10-01parisc: Fix serial console for machines with serial port on superio chipHelge Deller1-1/+2
Fix the serial console on machines where the serial port is located on the SuperIO chip. Signed-off-by: Helge Deller <deller@gmx.de> Cc: Peter Hurley <peter@hurleysoftware.com>
2014-10-01[SCSI] cxgb4i: avoid holding mutex in interrupt contextAnish Bhatt3-7/+55
cxgbi_inet6addr_handler() can be called in interrupt context, so use rcu protected list while finding netdev. This is observed as a scheduling in atomic oops when running over ipv6. Fixes: fc8d0590d914 ("libcxgbi: Add ipv6 api to driver") Fixes: 759a0cc5a3e1 ("cxgb4i: Add ipv6 code to driver, call into libcxgbi ipv6 api") Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: Karen Xie <kxie@chelsio.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-10-01Merge tag 'asoc-v3.17-rc7' of ↵Takashi Iwai1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fix SSM2602 device identification Another fix for v3.17, fixing device identification after the split out of the I2C and SPI code.

Privacy Policy