AgeCommit message (Collapse)AuthorFilesLines
2017-11-13Merge branch 'timers-core-for-linus' of ↵Linus Torvalds253-1864/+1810
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...
2017-11-13Merge branch 'irq-core-for-linus' of ↵Linus Torvalds57-408/+2490
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq core updates from Thomas Gleixner: "A rather large update for the interrupt core code and the irq chip drivers: - Add a new bitmap matrix allocator and supporting changes, which is used to replace the x86 vector allocator which comes with separate pull request. This allows to replace the convoluted nested loop allocation function in x86 with a facility which supports the recently added property of managed interrupts proper and allows to switch to a best effort vector reservation scheme, which addresses problems with vector exhaustion. - A large update to the ARM GIC-V3-ITS driver adding support for range selectors. - New interrupt controllers: - Meson and Meson8 GPIO - BCM7271 L2 - Socionext EXIU If you expected that this will stop at some point, I have to disappoint you. There are new ones posted already. Sigh! - STM32 interrupt controller support for new platforms. - A pile of fixes, cleanups and updates to the MIPS GIC driver - The usual small fixes, cleanups and updates all over the place. Most visible one is to move the irq chip drivers Kconfig switches into a separate Kconfig menu" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) genirq: Fix type of shifting literal 1 in __setup_irq() irqdomain: Drop pointless NULL check in virq_debug_show_one genirq/proc: Return proper error code when irq_set_affinity() fails irq/work: Use llist_for_each_entry_safe irqchip: mips-gic: Print warning if inherited GIC base is used irqchip/mips-gic: Add pr_fmt and reword pr_* messages irqchip/stm32: Move the wakeup on interrupt mask irqchip/stm32: Fix initial values irqchip/stm32: Add stm32h7 support dt-bindings/interrupt-controllers: Add compatible string for stm32h7 irqchip/stm32: Add multi-bank management irqchip/stm32: Select GENERIC_IRQ_CHIP irqchip/exiu: Add support for Socionext Synquacer EXIU controller dt-bindings: Add description of Socionext EXIU interrupt controller irqchip/gic-v3-its: Fix VPE activate callback return value irqchip: mips-gic: Make IPI bitmaps static irqchip: mips-gic: Share register writes in gic_set_type() irqchip: mips-gic: Remove gic_vpes variable irqchip: mips-gic: Use num_possible_cpus() to reserve IPIs irqchip: mips-gic: Configure EIC when CPUs come online ...
2017-11-13Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds21-108/+155
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform updates from Ingo Molnar: "The main changes in this cycle were: - a refactoring of the early virt init code by merging 'struct x86_hyper' into 'struct x86_platform' and 'struct x86_init', which allows simplifications and also the addition of a new ->guest_late_init() callback. (Juergen Gross) - timer_setup() conversion of the UV code (Kees Cook)" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/virt/xen: Use guest_late_init to detect Xen PVH guest x86/virt, x86/platform: Add ->guest_late_init() callback to hypervisor_x86 structure x86/virt, x86/acpi: Add test for ACPI_FADT_NO_VGA x86/virt: Add enum for hypervisors to replace x86_hyper x86/virt, x86/platform: Merge 'struct x86_hyper' into 'struct x86_platform' and 'struct x86_init' x86/platform/UV: Convert timers to use timer_setup()
2017-11-13Merge branch 'x86-debug-for-linus' of ↵Linus Torvalds1-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 debug update from Ingo Molnar: "A single change enhancing stack traces by hiding wrapper function entries" * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/stacktrace: Avoid recording save_stack_trace() wrappers
2017-11-13Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds4-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: "Two changes: Propagate const/__initconst, and use ARRAY_SIZE() some more" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/events/amd/iommu: Make iommu_pmu const and __initconst x86: Use ARRAY_SIZE
2017-11-13Merge branch 'x86-boot-for-linus' of ↵Linus Torvalds7-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot updates from Ingo Molnar: "Three smaller changes: - clang fix - boot message beautification - unnecessary header inclusion removal" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Disable Clang warnings about GNU extensions x86/boot: Remove unnecessary #include <generated/utsrelease.h> x86/boot: Spell out "boot CPU" for BP
2017-11-13Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds110-1145/+4067
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 core updates from Ingo Molnar: "Note that in this cycle most of the x86 topics interacted at a level that caused them to be merged into tip:x86/asm - but this should be a temporary phenomenon, hopefully we'll back to the usual patterns in the next merge window. The main changes in this cycle were: Hardware enablement: - Add support for the Intel UMIP (User Mode Instruction Prevention) CPU feature. This is a security feature that disables certain instructions such as SGDT, SLDT, SIDT, SMSW and STR. (Ricardo Neri) [ Note that this is disabled by default for now, there are some smaller enhancements in the pipeline that I'll follow up with in the next 1-2 days, which allows this to be enabled by default.] - Add support for the AMD SEV (Secure Encrypted Virtualization) CPU feature, on top of SME (Secure Memory Encryption) support that was added in v4.14. (Tom Lendacky, Brijesh Singh) - Enable new SSE/AVX/AVX512 CPU features: AVX512_VBMI2, GFNI, VAES, VPCLMULQDQ, AVX512_VNNI, AVX512_BITALG. (Gayatri Kammela) Other changes: - A big series of entry code simplifications and enhancements (Andy Lutomirski) - Make the ORC unwinder default on x86 and various objtool enhancements. (Josh Poimboeuf) - 5-level paging enhancements (Kirill A. Shutemov) - Micro-optimize the entry code a bit (Borislav Petkov) - Improve the handling of interdependent CPU features in the early FPU init code (Andi Kleen) - Build system enhancements (Changbin Du, Masahiro Yamada) - ... plus misc enhancements, fixes and cleanups" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (118 commits) x86/build: Make the boot image generation less verbose selftests/x86: Add tests for the STR and SLDT instructions selftests/x86: Add tests for User-Mode Instruction Prevention x86/traps: Fix up general protection faults caused by UMIP x86/umip: Enable User-Mode Instruction Prevention at runtime x86/umip: Force a page fault when unable to copy emulated result to user x86/umip: Add emulation code for UMIP instructions x86/cpufeature: Add User-Mode Instruction Prevention definitions x86/insn-eval: Add support to resolve 16-bit address encodings x86/insn-eval: Handle 32-bit address encodings in virtual-8086 mode x86/insn-eval: Add wrapper function for 32 and 64-bit addresses x86/insn-eval: Add support to resolve 32-bit address encodings x86/insn-eval: Compute linear address in several utility functions resource: Fix resource_size.cocci warnings X86/KVM: Clear encryption attribute when SEV is active X86/KVM: Decrypt shared per-cpu variables when SEV is active percpu: Introduce DEFINE_PER_CPU_DECRYPTED x86: Add support for changing memory encryption attribute in early boot x86/io: Unroll string I/O when SEV is active x86/boot: Add early boot support when running with SEV active ...
2017-11-13Merge branch 'sched-core-for-linus' of ↵Linus Torvalds31-774/+1270
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main updates in this cycle were: - Group balancing enhancements and cleanups (Brendan Jackman) - Move CPU isolation related functionality into its separate kernel/sched/isolation.c file, with related 'housekeeping_*()' namespace and nomenclature et al. (Frederic Weisbecker) - Improve the interactive/cpu-intense fairness calculation (Josef Bacik) - Improve the PELT code and related cleanups (Peter Zijlstra) - Improve the logic of pick_next_task_fair() (Uladzislau Rezki) - Improve the RT IPI based balancing logic (Steven Rostedt) - Various micro-optimizations: - better !CONFIG_SCHED_DEBUG optimizations (Patrick Bellasi) - better idle loop (Cheng Jian) - ... plus misc fixes, cleanups and updates" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits) sched/core: Optimize sched_feat() for !CONFIG_SCHED_DEBUG builds sched/sysctl: Fix attributes of some extern declarations sched/isolation: Document isolcpus= boot parameter flags, mark it deprecated sched/isolation: Add basic isolcpus flags sched/isolation: Move isolcpus= handling to the housekeeping code sched/isolation: Handle the nohz_full= parameter sched/isolation: Introduce housekeeping flags sched/isolation: Split out new CONFIG_CPU_ISOLATION=y config from CONFIG_NO_HZ_FULL sched/isolation: Rename is_housekeeping_cpu() to housekeeping_cpu() sched/isolation: Use its own static key sched/isolation: Make the housekeeping cpumask private sched/isolation: Provide a dynamic off-case to housekeeping_any_cpu() sched/isolation, watchdog: Use housekeeping_cpumask() instead of ad-hoc version sched/isolation: Move housekeeping related code to its own file sched/idle: Micro-optimize the idle loop sched/isolcpus: Fix "isolcpus=" boot parameter handling when !CONFIG_CPUMASK_OFFSTACK x86/tsc: Append the 'tsc=' description for the 'tsc=unstable' boot parameter sched/rt: Simplify the IPI based RT balancing logic block/ioprio: Use a helper to check for RT prio sched/rt: Add a helper to test for a RT task ...
2017-11-13Merge branch 'ras-core-for-linus' of ↵Linus Torvalds2-13/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS updates from Ingo Molnar: "Two minor updates to AMD SMCA support, plus a timer_setup() conversion" * 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/MCE/AMD: Fix mce_severity_amd_smca() signature x86/MCE/AMD: Always give panic severity for UC errors in kernel context x86/mce: Convert timers to use timer_setup()
2017-11-13Merge branch 'perf-core-for-linus' of ↵Linus Torvalds182-2521/+8370
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main changes in this cycle were: Kernel: - kprobes updates: use better W^X patterns for code modifications, improve optprobes, remove jprobes. (Masami Hiramatsu, Kees Cook) - core fixes: event timekeeping (enabled/running times statistics) fixes, perf_event_read() locking fixes and cleanups, etc. (Peter Zijlstra) - Extend x86 Intel free-running PEBS support and support x86 user-register sampling in perf record and perf script. (Andi Kleen) Tooling: - Completely rework the way inline frames are handled. Instead of querying for the inline nodes on-demand in the individual tools, we now create proper callchain nodes for inlined frames. (Milian Wolff) - 'perf trace' updates (Arnaldo Carvalho de Melo) - Implement a way to print formatted output to per-event files in 'perf script' to facilitate generate flamegraphs, elliminating the need to write scripts to do that separation (yuzhoujian, Arnaldo Carvalho de Melo) - Update vendor events JSON metrics for Intel's Broadwell, Broadwell Server, Haswell, Haswell Server, IvyBridge, IvyTown, JakeTown, Sandy Bridge, Skylake, SkyLake Server - and Goldmont Plus V1 (Andi Kleen, Kan Liang) - Multithread the synthesizing of PERF_RECORD_ events for pre-existing threads in 'perf top', speeding up that phase, greatly improving the user experience in systems such as Intel's Knights Mill (Kan Liang) - Introduce the concept of weak groups in 'perf stat': try to set up a group, but if it's not schedulable fallback to not using a group. That gives us the best of both worlds: groups if they work, but still a usable fallback if they don't. E.g: (Andi Kleen) - perf sched timehist enhancements (David Ahern) - ... various other enhancements, updates, cleanups and fixes" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (139 commits) kprobes: Don't spam the build log with deprecation warnings arm/kprobes: Remove jprobe test case arm/kprobes: Fix kretprobe test to check correct counter perf srcline: Show correct function name for srcline of callchains perf srcline: Fix memory leak in addr2inlines() perf trace beauty kcmp: Beautify arguments perf trace beauty: Implement pid_fd beautifier tools include uapi: Grab a copy of linux/kcmp.h perf callchain: Fix double mapping al->addr for children without self period perf stat: Make --per-thread update shadow stats to show metrics perf stat: Move the shadow stats scale computation in perf_stat__update_shadow_stats perf tools: Add perf_data_file__write function perf tools: Add struct perf_data_file perf tools: Rename struct perf_data_file to perf_data perf script: Print information about per-event-dump files perf trace beauty prctl: Generate 'option' string table from kernel headers tools include uapi: Grab a copy of linux/prctl.h perf script: Allow creating per-event dump files perf evsel: Restore evsel->priv as a tool private area perf script: Use event_format__fprintf() ...
2017-11-13Merge branch 'locking-core-for-linus' of ↵Linus Torvalds307-1672/+1252
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core locking updates from Ingo Molnar: "The main changes in this cycle are: - Another attempt at enabling cross-release lockdep dependency tracking (automatically part of CONFIG_PROVE_LOCKING=y), this time with better performance and fewer false positives. (Byungchul Park) - Introduce lockdep_assert_irqs_enabled()/disabled() and convert open-coded equivalents to lockdep variants. (Frederic Weisbecker) - Add down_read_killable() and use it in the VFS's iterate_dir() method. (Kirill Tkhai) - Convert remaining uses of ACCESS_ONCE() to READ_ONCE()/WRITE_ONCE(). Most of the conversion was Coccinelle driven. (Mark Rutland, Paul E. McKenney) - Get rid of lockless_dereference(), by strengthening Alpha atomics, strengthening READ_ONCE() with smp_read_barrier_depends() and thus being able to convert users of lockless_dereference() to READ_ONCE(). (Will Deacon) - Various micro-optimizations: - better PV qspinlocks (Waiman Long), - better x86 barriers (Michael S. Tsirkin) - better x86 refcounts (Kees Cook) - ... plus other fixes and enhancements. (Borislav Petkov, Juergen Gross, Miguel Bernal Marin)" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) locking/x86: Use LOCK ADD for smp_mb() instead of MFENCE rcu: Use lockdep to assert IRQs are disabled/enabled netpoll: Use lockdep to assert IRQs are disabled/enabled timers/posix-cpu-timers: Use lockdep to assert IRQs are disabled/enabled sched/clock, sched/cputime: Use lockdep to assert IRQs are disabled/enabled irq_work: Use lockdep to assert IRQs are disabled/enabled irq/timings: Use lockdep to assert IRQs are disabled/enabled perf/core: Use lockdep to assert IRQs are disabled/enabled x86: Use lockdep to assert IRQs are disabled/enabled smp/core: Use lockdep to assert IRQs are disabled/enabled timers/hrtimer: Use lockdep to assert IRQs are disabled/enabled timers/nohz: Use lockdep to assert IRQs are disabled/enabled workqueue: Use lockdep to assert IRQs are disabled/enabled irq/softirqs: Use lockdep to assert IRQs are disabled/enabled locking/lockdep: Add IRQs disabled/enabled assertion APIs: lockdep_assert_irqs_enabled()/disabled() locking/pvqspinlock: Implement hybrid PV queued/unfair locks locking/rwlocks: Fix comments x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized block, locking/lockdep: Assign a lock_class per gendisk used for wait_for_completion() workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes ...
2017-11-13Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds35-256/+14598
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The main changes in this cycle are: - Documentation updates - RCU CPU stall-warning updates - Torture-test updates - Miscellaneous fixes Size wise the biggest updates are to documentation. Excluding documentation most of the code increase comes from a single commit which expands debugging" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) srcu: Add parameters to SRCU docbook comments doc: Rewrite confusing statement about memory barriers memory-barriers.txt: Fix typo in pairing example rcu/segcblist: Include rcupdate.h rcu: Add extended-quiescent-state testing advice rcu: Suppress lockdep false-positive ->boost_mtx complaints rcu: Do not include rtmutex_common.h unconditionally torture: Provide TMPDIR environment variable to specify tmpdir rcutorture: Dump writer stack if stalled rcutorture: Add interrupt-disable capability to stall-warning tests rcu: Suppress RCU CPU stall warnings while dumping trace rcu: Turn off tracing before dumping trace rcu: Make RCU CPU stall warnings check for irq-disabled CPUs sched,rcu: Make cond_resched() provide RCU quiescent state sched: Make resched_cpu() unconditional irq_work: Map irq_work_on_queue() to irq_work_on() in !SMP rcu: Create call_rcu_tasks() kthread at boot time rcu: Fix up pending cbs check in rcu_prepare_for_idle memory-barriers: Rework multicopy-atomicity section memory-barriers: Replace uses of "transitive" ...
2017-11-13Merge tag 'please-pull-gettime_vsyscall_update' of ↵Linus Torvalds5-26/+36
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 update from Tony Luck: "Stop ia64 being the last holdout using GENERIC_TIME_VSYSCALL_OLD so that John Stultz can drop that code" * tag 'please-pull-gettime_vsyscall_update' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: ia64: Update fsyscall gettime to use modern vsyscall_update
2017-11-13Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds46-262/+1940
Pull OpenRISC updates from Stafford Horne: "The OpenRISC work is a bit more interesting this time, adding SMP support and a few general cleanups. Small Things: - Move OpenRISC docs into Documentation and clean them up - Document previously undocumented devicetree bindings - Update the or1ksim dts to use stdout-path OpenRISC SMP support details: - First the "use shadow registers" and "define CPU_BIG_ENDIAN as true" get the architecture ready for SMP. - The "add 1 and 2 byte cmpxchg support" and "use qspinlocks and qrwlocks" add the SMP locking infrastructure as needed. Using the qspinlocks and qrwlocks as suggested by Peter Z while reviewing the original spinlocks implementation. - The "support for ompic" adds a new irqchip device which is used for IPI communication to support SMP. - The "initial SMP support" adds smp.c and makes changes to all of the necessary data-structures to be per-cpu. The remaining patches are bug fixes and debug helpers which I wanted to keep separate from the "initial SMP support" in order to allow them to be reviewed on their own. This includes: - add cacheflush support to fix icache aliasing - fix initial preempt state for secondary cpu tasks - sleep instead of spin on secondary wait - support framepointers and STACKTRACE_SUPPORT - enable LOCKDEP_SUPPORT and irqflags tracing - timer sync: Add tick timer sync logic - fix possible deadlock in timer sync, pointed out by mips guys Note: the irqchip patch was reviewed with Marc and we agreed to push it together with these patches" * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: fix possible deadlock scenario during timer sync openrisc: pass endianness info to sparse openrisc: add tick timer multi-core sync logic openrisc: enable LOCKDEP_SUPPORT and irqflags tracing openrisc: support framepointers and STACKTRACE_SUPPORT openrisc: add simple_smp dts and defconfig for simulators openrisc: add cacheflush support to fix icache aliasing openrisc: sleep instead of spin on secondary wait openrisc: fix initial preempt state for secondary cpu tasks openrisc: initial SMP support irqchip: add initial support for ompic dt-bindings: add openrisc to vendor prefixes list openrisc: use qspinlocks and qrwlocks openrisc: add 1 and 2 byte cmpxchg support openrisc: use shadow registers to save regs on exception dt-bindings: openrisc: Add OpenRISC platform SoC Documentation: openrisc: Updates to README Documentation: Move OpenRISC docs out of arch/ MAINTAINERS: Add OpenRISC pic maintainer openrisc: dts: or1ksim: Add stdout-path
2017-11-13Merge tag 'm68k-for-v4.15-tag1' of ↵Linus Torvalds21-92/+90
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - more printk modernization - various cleanups and fixes (incl. a race condition) for Mac - defconfig updates * tag 'm68k-for-v4.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/defconfig: Update defconfigs for v4.14-rc7 m68k/mac: Add mutual exclusion for IOP interrupt polling m68k/mac: Disentangle VIA/RBV and NuBus initialization m68k/mac: Disentangle VIA and OSS initialization m68k/mac: More printk modernization
2017-11-13Merge branch 'for-linus' of ↵Linus Torvalds125-4580/+4751
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: "Since Martin is on vacation you get the s390 pull request for the v4.15 merge window this time from me. Besides a lot of cleanups and bug fixes these are the most important changes: - a new regset for runtime instrumentation registers - hardware accelerated AES-GCM support for the aes_s390 module - support for the new CEX6S crypto cards - support for FORTIFY_SOURCE - addition of missing z13 and new z14 instructions to the in-kernel disassembler - generate opcode tables for the in-kernel disassembler out of a simple text file instead of having to manually maintain those tables - fast memset16, memset32 and memset64 implementations - removal of named saved segment support - hardware counter support for z14 - queued spinlocks and queued rwlocks implementations for s390 - use the stack_depth tracking feature for s390 BPF JIT - a new s390_sthyi system call which emulates the sthyi (store hypervisor information) instruction - removal of the old KVM virtio transport - an s390 specific CPU alternatives implementation which is used in the new spinlock code" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (88 commits) MAINTAINERS: add virtio-ccw.h to virtio/s390 section s390/noexec: execute kexec datamover without DAT s390: fix transactional execution control register handling s390/bpf: take advantage of stack_depth tracking s390: simplify transactional execution elf hwcap handling s390/zcrypt: Rework struct ap_qact_ap_info. s390/virtio: remove unused header file kvm_virtio.h s390: avoid undefined behaviour s390/disassembler: generate opcode tables from text file s390/disassembler: remove insn_to_mnemonic() s390/dasd: avoid calling do_gettimeofday() s390: vfio-ccw: Do not attempt to free no-op, test and tic cda. s390: remove named saved segment support s390/archrandom: Reconsider s390 arch random implementation s390/pci: do not require AIS facility s390/qdio: sanitize put_indicator s390/qdio: use atomic_cmpxchg s390/nmi: avoid using long-displacement facility s390: pass endianness info to sparse s390/decompressor: remove informational messages ...
2017-11-13Merge branch 'for-next' of ↵Linus Torvalds13-14/+238
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68k updates from Greg Ungerer: "The bulk of the changes are to support the ColdFire 5441x SoC family with their MMU enabled. The parts have been supported for a long time now, but only in no-MMU mode. Angelo Dureghello has a new board with a 5441x and we have ironed out the last problems with MMU enabled on it. So there is also some changes to properly support that board too. Also a fix for a link problem when selecting the traditional 68k beep device in no-MMU configurations" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: add Sysam stmark2 open board support m68k: coldfire: add dspi0 module support m68k: pull mach_beep in setup.c m68k: allow ColdFire m5441x parts to run with MMU enabled m68k: fix ColdFire node shift size calculation m68k: move coldfire MMU initialization code
2017-11-13Merge branch 'next-integrity' of ↵Linus Torvalds19-125/+164
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem integrity updates from James Morris: "There is a mixture of bug fixes, code cleanup, preparatory code for new functionality and new functionality. Commit 26ddabfe96bb ("evm: enable EVM when X509 certificate is loaded") enabled EVM without loading a symmetric key, but was limited to defining the x509 certificate pathname at build. Included in this set of patches is the ability of enabling EVM, without loading the EVM symmetric key, from userspace. New is the ability to prevent the loading of an EVM symmetric key." * 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: ima: Remove redundant conditional operator ima: Fix bool initialization/comparison ima: check signature enforcement against cmdline param instead of CONFIG module: export module signature enforcement status ima: fix hash algorithm initialization EVM: Only complain about a missing HMAC key once EVM: Allow userspace to signal an RSA key has been loaded EVM: Include security.apparmor in EVM measurements ima: call ima_file_free() prior to calling fasync integrity: use kernel_read_file_from_path() to read x509 certs ima: always measure and audit files in policy ima: don't remove the securityfs policy file vfs: fix mounting a filesystem with i_version
2017-11-13Merge branch 'next-general' of ↵Linus Torvalds17-279/+385
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull general security subsystem updates from James Morris: "TPM (from Jarkko): - essential clean up for tpm_crb so that ARM64 and x86 versions do not distract each other as much as before - /dev/tpm0 rejects now too short writes (shorter buffer than specified in the command header - use DMA-safe buffer in tpm_tis_spi - otherwise mostly minor fixes. Smack: - base support for overlafs Capabilities: - BPRM_FCAPS fixes, from Richard Guy Briggs: The audit subsystem is adding a BPRM_FCAPS record when auditing setuid application execution (SYSCALL execve). This is not expected as it was supposed to be limited to when the file system actually had capabilities in an extended attribute. It lists all capabilities making the event really ugly to parse what is happening. The PATH record correctly records the setuid bit and owner. Suppress the BPRM_FCAPS record on set*id. TOMOYO: - Y2038 timestamping fixes" * 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (28 commits) MAINTAINERS: update the IMA, EVM, trusted-keys, encrypted-keys entries Smack: Base support for overlayfs MAINTAINERS: remove David Safford as maintainer for encrypted+trusted keys tomoyo: fix timestamping for y2038 capabilities: audit log other surprising conditions capabilities: fix logic for effective root or real root capabilities: invert logic for clarity capabilities: remove a layer of conditional logic capabilities: move audit log decision to function capabilities: use intuitive names for id changes capabilities: use root_priveleged inline to clarify logic capabilities: rename has_cap to has_fcap capabilities: intuitive names for cap gain status capabilities: factor out cap_bprm_set_creds privileged root tpm, tpm_tis: use ARRAY_SIZE() to define TPM_HID_USR_IDX tpm: fix duplicate inline declaration specifier tpm: fix type of a local variables in tpm_tis_spi.c tpm: fix type of a local variable in tpm2_map_command() tpm: fix type of a local variable in tpm2_get_cc_attrs_tbl() tpm-dev-common: Reject too short writes ...
2017-11-13Merge tag 'mmc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds66-581/+3256
Pull MMC updates from Ulf Hansson: "MMC core: - Introduce host claiming by context to support blkmq - Preparations for enabling CQE (eMMC CMDQ) requests - Re-factorizations to prepare for blkmq support - Re-factorizations to prepare for CQE support - Fix signal voltage switch for SD cards without power cycle - Convert RPMB to a character device - Export eMMC revision via sysfs - Support eMMC DT binding for fixed driver type - Document mmc_regulator_get_supply() API MMC host: - omap_hsmmc: Updated regulator management for PBIAS - sdhci-omap: Add new OMAP SDHCI driver - meson-mx-sdio: New driver for the Amlogic Meson8 and Meson8b SoCs - sdhci-pci: Add support for Intel CDF - sdhci-acpi: Fix voltage switch for some Intel host controllers - sdhci-msm: Enable delay circuit calibration clocks - sdhci-msm: Manage power IRQ properly - mediatek: Add support of mt2701/mt2712 - mediatek: Updates management of clocks and tunings - mediatek: Upgrade eMMC HS400 support - rtsx_pci: Update tuning for gen3 PCI-Express - renesas_sdhi: Support R-Car Gen[123] fallback compatibility strings - Catch all errors when getting regulators - Various additional improvements and cleanups" * tag 'mmc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (91 commits) sdhci-fujitsu: add support for setting the CMD_DAT_DELAY attribute dt-bindings: sdhci-fujitsu: document cmd-dat-delay property mmc: tmio: Replace msleep() of 20ms or less with usleep_range() mmc: dw_mmc: Convert timers to use timer_setup() mmc: dw_mmc: Cleanup the DTO timer like the CTO one mmc: vub300: Use common code in __download_offload_pseudocode() mmc: tmio: Use common error handling code in tmio_mmc_host_probe() mmc: Convert timers to use timer_setup() mmc: sdhci-acpi: Fix voltage switch for some Intel host controllers mmc: sdhci-acpi: Let devices define their own private data mmc: mediatek: perfer to use rise edge latching for cmd line mmc: mediatek: improve eMMC hs400 mode read performance mmc: mediatek: add latch-ck support mmc: mediatek: add support of source_cg clock mmc: mediatek: add stop_clk fix and enhance_rx support mmc: mediatek: add busy_check support mmc: mediatek: add async fifo and data tune support mmc: mediatek: add pad_tune0 support mmc: mediatek: make hs400_tune_response only for mt8173 arm64: dts: mt8173: remove "mediatek, mt8135-mmc" from mmc nodes ...
2017-11-13/proc/module: fix building without kallsymsArnd Bergmann1-2/+8
As reported by kernelci and other build bots, we now get a link failure without CONFIG_KALLSYMS: module.c:(.text+0xf2c): undefined reference to `kallsyms_show_value' This adds a dummy helper with the same name that can be used for compilation. It's not entirely clear to me what this should return for !CONFIG_KALLSYMS, I picked an unconditional 'false', which leads to the module address being unavailable to user space. Link: https://kernelci.org/build/mainline/branch/master/kernel/v4.14-5-g516fb7f2e73d/ Fixes: 516fb7f2e73d ("/proc/module: use the same logic as /proc/kallsyms for address exposure") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-13kallsyms: fix building without printkArnd Bergmann1-1/+2
Building kallsyms fails without CONFIG_PRINTK due to a missing declaration: kernel/kallsyms.c: In function 'kallsyms_show_value': kernel/kallsyms.c:670:10: error: 'kptr_restrict' undeclared (first use in this function); did you mean 'keyring_restrict'? This moves the declaration outside of the #ifdef guard, the definition is already available without CONFIG_PRINTK. Fixes: c0f3ea158939 ("stop using '%pK' for /proc/kallsyms pointer values") Signed-off-by: Arnd Bergmann <arnd@arndb.de> [ I clearly need to start doing "allnoconfig" builds too, or just have a test branch for the 0day robot - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-13Merge tag 'regmap-v4.15' of ↵Linus Torvalds6-26/+161
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "After several quiet kernel releases we've got a couple of new features in regmap, support for using hwspinlocks as the lock for the internal data structures and a helper for polling on regmap_fields. The Kconfig dependencies on hwspinlocks were annoyingly difficult to squash between things behaving surprisingly and randconfig, I could've squashed those commits down but might've have caused hassle with other trees trying to use the new support. - support for using a hwspinlock to protect the regmap - an iopoll style helper for regmap_field" * tag 'regmap-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Fix unused warning regmap: Try to work around Kconfig exploding on HWSPINLOCK regmap: Clean up hwspinlock on regmap exit regmap: Also protect hwspinlock in error handling path regmap: Add a config option for hwspinlock regmap: Add hardware spinlock support regmap: avoid -Wint-in-bool-context warning regmap: add iopoll-like polling macro for regmap_field regmap: constify regmap_bus structures regmap: Avoid namespace collision within macro & tidy up
2017-11-13Merge tag 'spi-v4.15' of ↵Linus Torvalds19-116/+926
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "This release is almost entirely driver changes, there's a couple of fixes in the core but otherwise it's all drivers: - fix for mixed dynamic and static bus number assignment. - fixes for some leaks arising from confusing lifetime rules during device unregistration and improved documentation to try to help avoid this in the future. - fixes to make the native chip select support for i.MX usable. - slave mode support for i.MX. - support for Coldfire MCF5441x DSPI, Renesas R8A7443/5 and Spreadtrum ADI" * tag 'spi-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (31 commits) spi: imx: Don't require platform data chipselect array spi: imx: Fix failure path leak on GPIO request error spi: imx: GPIO based chip selects should not be required spi: sh-msiof: remove redundant pointer dev spi: s3c64xx: remove redundant pointer sci spi: spi-fsl-dspi: enabling Coldfire mcf5441x dspi spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbers spi: orion: remove redundant assignment of status to zero spi: sh-msiof: Fix DMA transfer size check spi: imx: Fix failure path leak on GPIO request error spi: spi-axi: fix potential use-after-free after deregistration spi: document odd controller reference handling spi: fix use-after-free at controller deregistration spi: sprd: Fix the possible negative value of BIT() spi: sprd-adi: fix platform_no_drv_owner.cocci warnings spi: a3700: Change SPI mode before asserting chip-select spi: tegra114: correct register name in definition spi: spreadtrum adi: add hwspinlock dependency spi: sh-msiof: Use of_device_get_match_data() helper spi: rspi: Use of_device_get_match_data() helper ...
2017-11-13Merge tag 'regulator-v4.15' of ↵Linus Torvalds12-47/+241
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "A very quiet release for regulator, there's some new device support in existing drivers here and a few fixes but nothing in the core. Summary: - New device support for Allwinner AXP813, Dialog DA223/4/5 and Qualcomm PMI8994" * tag 'regulator-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: tps65218: remove unused tps_info structure regulator: tps65218: Fix strobe assignment regulator: qcom_spmi: Include offset when translating voltages regulator: qcom_spmi: Add support for pmi8994 regulator: da9211: update for supporting da9223/4/5 ASoC: pfuze100: Remove leading zero from '@08' notation regulator: axp20x: Simplify axp20x_is_polyphase_slave implementation regulator: axp20x: Add support for AXP813 regulators
2017-11-13Merge tag 'hwmon-for-linus-v4.15' of ↵Linus Torvalds26-403/+1131
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: - drivers for MAX31785 and MAX6621 - support for AMD family 17h (Ryzen, Threadripper) temperature sensors - various driver cleanups and minor improvements * tag 'hwmon-for-linus-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (30 commits) dt-bindings: pmbus: Add Maxim MAX31785 documentation pmbus: Add driver for Maxim MAX31785 Intelligent Fan Controller hwmon: (aspeed-pwm-tacho) Sort headers hwmon: (xgene) Minor clean up of ifdef and acpi_match_table reference hwmon: (max6621) Inverted if condition in max6621_read() hwmon: (asc7621) remove redundant assignment to newval hwmon: (xgene) Support hwmon v2 hwmon: (gpio-fan) Fix null pointer dereference at probe hwmon: (gpio-fan) Convert to use GPIO descriptors hwmon: (gpio-fan) Rename GPIO line state variables hwmon: (gpio-fan) Get rid of the gpio alarm struct hwmon: (gpio-fan) Get rid of platform data struct hwmon: (gpio-fan) Mandate OF_GPIO and cut pdata path hwmon: (gpio-fan) Send around device pointer hwmon: (gpio-fan) Localize platform data hwmon: (gpio-fan) Use local variable pointers hwmon: (gpio-fan) Move DT bindings to the right place Documentation: devicetree: add max6621 device hwmon: (max6621) Add support for Maxim MAX6621 temperature sensor hwmon: (w83793) make const array watchdog_minors static, reduces object code size ...
2017-11-13Merge tag 'edac_for_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds10-125/+158
Pull EDAC updates from Borislav Petkov: "The usual pile of bugfixes, cleanups and minor driver enhancements. Worth noting are the changes to ghes_edac to use a whitelist of known-good platforms on which GHES error reporting works relatively reliably. By Toshi Kani and Borislav Petkov" * tag 'edac_for_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, sb_edac: Fix missing break in switch MAINTAINERS: Split Cavium EDAC entry and add myself EDAC, sb_edac: Fix missing DIMM sysfs entries with KNL SNC2/SNC4 mode EDAC, skx_edac: Handle systems with segmented PCI busses EDAC, thunderx: Remove suspend/resume support EDAC, skx_edac: Fix detection of single-rank DIMMs EDAC, sb_edac: Don't create a second memory controller if HA1 is not present EDAC: Add owner check to the x86 platform drivers EDAC: Add helper which returns the loaded platform driver EDAC, ghes: Add platform check EDAC, ghes: Model a single, logical memory controller EDAC, ghes: Remove symbol exports EDAC: Handle return value of kasprintf()
2017-11-13Merge tag 'docs-4.15' of git://git.lwn.net/linuxLinus Torvalds83-1041/+2015
Pull documentation updates from Jonathan Corbet: "A relatively calm cycle for the docs tree again. - The old driver statement has been added to the kernel docs. - We have a couple of new helper scripts. find-unused-docs.sh from Sayli Karnic will point out kerneldoc comments that are not actually used in the documentation. Jani Nikula's documentation-file-ref-check finds references to non-existing files. - A new ftrace document from Steve Rostedt. - Vinod Koul converted the dmaengine docs to RST Beyond that, it's mostly simple fixes. This set reaches outside of Documentation/ a bit more than most. In all cases, the changes are to comment docs, mostly from Randy, in places where there didn't seem to be anybody better to take them" * tag 'docs-4.15' of git://git.lwn.net/linux: (52 commits) documentation: fb: update list of available compiled-in fonts MAINTAINERS: update DMAengine documentation location dmaengine: doc: ReSTize pxa_dma doc dmaengine: doc: ReSTize dmatest doc dmaengine: doc: ReSTize client API doc dmaengine: doc: ReSTize provider doc dmaengine: doc: Add ReST style dmaengine document ftrace/docs: Add documentation on how to use ftrace from within the kernel bug-hunting.rst: Fix an example and a typo in a Sphinx tag scripts: Add a script to find unused documentation samples: Convert timers to use timer_setup() documentation: kernel-api: add more info on bitmap functions Documentation: fix selftests related file refs Documentation: fix ref to power basic-pm-debugging Documentation: fix ref to trace stm content Documentation: fix ref to coccinelle content Documentation: fix ref to workqueue content Documentation: fix ref to sphinx/kerneldoc.py Documentation: fix locking rt-mutex doc refs docs: dev-tools: correct Coccinelle version number ...
2017-11-13kprobes: Don't spam the build log with deprecation warningsIngo Molnar1-6/+6
The jprobes APIs are deprecated - but are still in occasional use for code that few people seem to care about, so stop generating deprecation warnings. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-12/proc/module: use the same logic as /proc/kallsyms for address exposureLinus Torvalds3-9/+27
The (alleged) users of the module addresses are the same: kernel profiling. So just expose the same helper and format macros, and unify the logic. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-12modules: make sysfs attribute files readable by owner onlyLinus Torvalds1-1/+1
This code goes back to the historical bitkeeper tree commit 3f7b0672086 ("Module section offsets in /sys/module"), where Jonathan Corbet wanted to show people how to debug loadable modules. See https://lwn.net/Articles/88052/ from June 2004. To expose the required load address information, Jonathan added the sections subdirectory for every module in /sys/modules, and made them S_IRUGO - readable by everybody. It was a more innocent time, plus those S_IRxxx macro names are a lot more confusing than the octal numbers are, so maybe it wasn't even intentional. But here we are, thirteen years later, and I'll just change it to S_IRUSR instead. Let's see if anybody even notices. Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-12Merge branch 'kallsyms-restrictions'Linus Torvalds1-2/+47
Merge /proc/kallsyms pointer value restrictions. Instead of using %pK, and making it about root access (at the wrong time, no less), make the whole choice of whether to show the actual pointer value be very explicit to the kallsyms code. In particular, we can now default to not doing so, and yet avoid annoying kernel profiling by actually looking at whether kernel profiling is allowed or not (by default it is not). This is all mostly preparation for the real "let's stop leaking kernel addresses" work that Tobin Harding is working on. Small steps. * kallsyms-restrictions: stop using '%pK' for /proc/kallsyms pointer values
2017-11-12genirq: Fix type of shifting literal 1 in __setup_irq()Rasmus Villemoes1-1/+1
If ffz() ever returns a value >= 31 then the following shift is undefined behaviour because the literal 1 which gets shifted is treated as signed integer. In practice, the bug is probably harmless, since the first undefined shift count is 31 which results - ignoring UB - in (int)(0x80000000). This gets sign extended so bit 32-63 will be set as well and all subsequent __setup_irq() calls would just end up hitting the -EBUSY branch. However, a sufficiently aggressive optimizer may use the UB of 1<<31 to decide that doesn't happen, and hence elide the sign-extension code, so that subsequent calls can indeed get ffz > 31. In any case, the right thing to do is to make the literal 1UL. [ tglx: For this to happen a single interrupt would have to be shared by 32 devices. Hardware like that does not exist and would have way more problems than that. ] Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20171030213548.16831-1-linux@rasmusvillemoes.dk
2017-11-12irqdomain: Drop pointless NULL check in virq_debug_show_oneRasmus Villemoes1-2/+1
data has been already derefenced unconditionally, so it's pointless to do a NULL pointer check on it afterwards. Drop it. [ tglx: Depersonify changelog. ] Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/20171112212904.28574-1-linux@rasmusvillemoes.dk
2017-11-12genirq/proc: Return proper error code when irq_set_affinity() failsWen Yaxng1-2/+3
write_irq_affinity() returns the number of written bytes, which means success, unconditionally whether the actual irq_set_affinity() call succeeded or not. Add proper error handling and pass the error code returned from irq_set_affinity() back to user space in case of failure. [ tglx: Fixed coding style and massaged changelog ] Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn> Cc: zhong.weidong@zte.com.cn Link: https://lkml.kernel.org/r/1510106103-184761-1-git-send-email-wen.yang99@zte.com.cn
2017-11-12modpost: detect modules without a MODULE_LICENSERandy Dunlap1-1/+1
Partially revert commit 2fa365682943 ("kbuild: soften MODULE_LICENSE check") so that modpost detects modules that do not have a MODULE_LICENSE. Sam's commit also changed the fatal error to a warning, which I am leaving as is. This gives advance notice of when a module has no license and will taint the kernel if the module is loaded. This produces the following warnings on x86_64 allmodconfig: MODPOST 6520 modules WARNING: modpost: missing MODULE_LICENSE() in drivers/auxdisplay/img-ascii-lcd.o WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-ath79.o WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-iop.o WARNING: modpost: missing MODULE_LICENSE() in drivers/iio/accel/kxsd9-i2c.o WARNING: modpost: missing MODULE_LICENSE() in drivers/iio/adc/qcom-vadc-common.o WARNING: modpost: missing MODULE_LICENSE() in drivers/media/platform/mtk-vcodec/mtk-vcodec-common.o WARNING: modpost: missing MODULE_LICENSE() in drivers/media/platform/soc_camera/soc_scale_crop.o WARNING: modpost: missing MODULE_LICENSE() in drivers/mtd/nand/denali_pci.o WARNING: modpost: missing MODULE_LICENSE() in drivers/net/phy/cortina.o WARNING: modpost: missing MODULE_LICENSE() in drivers/pinctrl/pxa/pinctrl-pxa2xx.o WARNING: modpost: missing MODULE_LICENSE() in drivers/power/reset/zx-reboot.o WARNING: modpost: missing MODULE_LICENSE() in drivers/rpmsg/qcom_glink_native.o WARNING: modpost: missing MODULE_LICENSE() in drivers/staging/comedi/drivers/ni_atmio.o WARNING: modpost: missing MODULE_LICENSE() in net/9p/9pnet_xen.o WARNING: modpost: missing MODULE_LICENSE() in sound/soc/codecs/snd-soc-pcm512x-spi.o Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-12Linux 4.14v4.14Linus Torvalds1-1/+1
2017-11-12Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds7-19/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of small fixes: - make KGDB work again which got broken by the conversion of WARN() to #UD. The WARN fixup needs to run before the notifier callchain, otherwise KGDB tries to handle it and crashes. - disable KASAN in the ORC unwinder to prevent false positive KASAN warnings - prevent default mapping above 47bit when 5 level page tables are enabled - make the delay calibration optimization work correctly, which had the conditionals the wrong way around and was operating on data which was not yet updated. - remove the bogus X86_TRAP_BP trap init from the default IDT init table, which broke 32bit int3 handling by overwriting the correct int3 setup. - replace this_cpu* with boot_cpu_data access in the preemptible oprofile init code" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/debug: Handle warnings before the notifier chain, to fix KGDB crash x86/mm: Fix ELF_ET_DYN_BASE for 5-level paging x86/idt: Remove X86_TRAP_BP initialization in idt_setup_traps() x86/oprofile/ppro: Do not use __this_cpu*() in preemptible context x86/unwind: Disable KASAN checking in the ORC unwinder x86/smpboot: Make optimization of delay calibration work correctly
2017-11-12Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds3-2/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tool fixes from Thomas Gleixner: "A small set of fixes for perf tool: - synchronize the i915 drm header to avoid the 'out of date' warning - make sure that perf trace cleans up its temporary files on exit - unbreak the build with newer flex versions - add missing braces in the eBPF parsing rules" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tooling/headers: Sync the tools/include/uapi/drm/i915_drm.h UAPI header perf trace: Call machine__exit() at exit perf tools: Fix eBPF event specification parsing perf tools: Add "reject" option for parse-events.l
2017-11-12timers: Add a function to start/reduce a timerDavid Howells2-7/+39
Add a function, similar to mod_timer(), that will start a timer if it isn't running and will modify it if it is running and has an expiry time longer than the new time. If the timer is running with an expiry time that's the same or sooner, no change is made. The function looks like: int timer_reduce(struct timer_list *timer, unsigned long expires); This can be used by code such as networking code to make it easier to share a timer for multiple timeouts. For instance, in upcoming AF_RXRPC code, the rxrpc_call struct will maintain a number of timeouts: unsigned long ack_at; unsigned long resend_at; unsigned long ping_at; unsigned long expect_rx_by; unsigned long expect_req_by; unsigned long expect_term_by; each of which is set independently of the others. With timer reduction available, when the code needs to set one of the timeouts, it only needs to look at that timeout and then call timer_reduce() to modify the timer, starting it or bringing it forward if necessary. There is no need to refer to the other timeouts to see which is earliest and no need to take any lock other than, potentially, the timer lock inside timer_reduce(). Note, that this does not protect against concurrent invocations of any of the timer functions. As an example, the expect_rx_by timeout above, which terminates a call if we don't get a packet from the server within a certain time window, would be set something like this: unsigned long now = jiffies; unsigned long expect_rx_by = now + packet_receive_timeout; WRITE_ONCE(call->expect_rx_by, expect_rx_by); timer_reduce(&call->timer, expect_rx_by); The timer service code (which might, say, be in a work function) would then check all the timeouts to see which, if any, had triggered, deal with those: t = READ_ONCE(call->ack_at); if (time_after_eq(now, t)) { cmpxchg(&call->ack_at, t, now + MAX_JIFFY_OFFSET); set_bit(RXRPC_CALL_EV_ACK, &call->events); } and then restart the timer if necessary by finding the soonest timeout that hasn't yet passed and then calling timer_reduce(). The disadvantage of doing things this way rather than comparing the timers each time and calling mod_timer() is that you *will* take timer events unless you can finish what you're doing and delete the timer in time. The advantage of doing things this way is that you don't need to use a lock to work out when the next timer should be set, other than the timer's own lock - which you might not have to take. [ tglx: Fixed weird formatting and adopted it to pending changes ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: keyrings@vger.kernel.org Cc: linux-afs@lists.infradead.org Link: https://lkml.kernel.org/r/151023090769.23050.1801643667223880753.stgit@warthog.procyon.org.uk
2017-11-12pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()Arnd Bergmann2-4/+2
__getnstimeofday() is a rather odd interface, with a number of quirks: - The caller may come from NMI context, but the implementation is not NMI safe, one way to get there from NMI is NMI handler: something bad panic() kmsg_dump() pstore_dump() pstore_record_init() __getnstimeofday() - The calling conventions are different from any other timekeeping functions, to deal with returning an error code during suspended timekeeping. Address the above issues by using a completely different method to get the time: ktime_get_real_fast_ns() is NMI safe and has a reasonable behavior when timekeeping is suspended: it returns the time at which it got suspended. As Thomas Gleixner explained, this is safe, as ktime_get_real_fast_ns() does not call into the clocksource driver that might be suspended. The result can easily be transformed into a timespec structure. Since ktime_get_real_fast_ns() was not exported to modules, add the export. The pstore behavior for the suspended case changes slightly, as it now stores the timestamp at which timekeeping was suspended instead of storing a zero timestamp. This change is not addressing y2038-safety, that's subject to a more complex follow up patch. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Colin Cross <ccross@android.com> Link: https://lkml.kernel.org/r/20171110152530.1926955-1-arnd@arndb.de
2017-11-12irq/work: Use llist_for_each_entry_safeThomas Gleixner1-3/+3
The llist_for_each_entry() loop in irq_work_run_list() is unsafe because once the works PENDING bit is cleared it can be requeued on another CPU. Use llist_for_each_entry_safe() instead. Fixes: 16c0890dc66d ("irq/work: Don't reinvent the wheel but use existing llist API") Reported-by:Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petri Latvala <petri.latvala@intel.com> Link: http://lkml.kernel.org/r/151027307351.14762.4611888896020658384@mail.alporthouse.com
2017-11-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds15-34/+68
Pull networking fixes from David Miller: 1) Use after free in vlan, from Cong Wang. 2) Handle NAPI poll with a zero budget properly in mlx5 driver, from Saeed Mahameed. 3) If DMA mapping fails in mlx5 driver, NULL out page, from Inbar Karmy. 4) Handle overrun in RX FIFO of sun4i CAN driver, from Gerhard Bertelsmann. 5) Missing return in mdb and vlan prepare phase of DSA layer, from Vivien Didelot. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: vlan: fix a use-after-free in vlan_device_event() net: dsa: return after vlan prepare phase net: dsa: return after mdb prepare phase can: ifi: Fix transmitter delay calculation tcp: fix tcp_fastretrans_alert warning tcp: gso: avoid refcount_t warning from tcp_gso_segment() can: peak: Add support for new PCIe/M2 CAN FD interfaces can: sun4i: handle overrun in RX FIFO can: c_can: don't indicate triple sampling support for D_CAN net/mlx5e: Increase Striding RQ minimum size limit to 4 multi-packet WQEs net/mlx5e: Set page to null in case dma mapping fails net/mlx5e: Fix napi poll with zero budget net/mlx5: Cancel health poll before sending panic teardown command net/mlx5: Loop over temp list to release delay events rds: ib: Fix NULL pointer dereference in debug code
2017-11-11Merge tag 'linux-can-fixes-for-4.14-20171110' of ↵David S. Miller5-9/+25
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2017-11-10 this is a pull request for net/master. The first patch by Richard Schütz for the c_can driver removes the false indication to support triple sampling for d_can. Gerhard Bertelsmann's patch for the sun4i driver improves the RX overrun handling. The patch by Stephane Grosjean for the peak_canfd driver adds the PCI ids for various new PCIe/M2 interfaces. Marek Vasut's patch for the ifi driver fix transmitter delay calculation. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11Merge tag 'mlx5-fixes-2017-11-08' of ↵David S. Miller5-13/+20
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2017-11-08 The following series includes some fixes for mlx5 core and etherent driver. Sorry for the late submission but as you can see i have some very critical fixes below that i would like them merged into this RC. Please pull and let me know if there is any problem. For -stable: ('net/mlx5e: Set page to null in case dma mapping fails') kernels >= 4.13 ('net/mlx5: FPGA, return -EINVAL if size is zero') kernels >= 4.13 ('net/mlx5: Cancel health poll before sending panic teardown command') kernels >= 4.13 V1->V2: - Fix Reviewed-by tag of the 2nd patch. - Drop the FPGA 0 size fix, it needs some more change log info. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11vlan: fix a use-after-free in vlan_device_event()Cong Wang1-3/+3
After refcnt reaches zero, vlan_vid_del() could free dev->vlan_info via RCU: RCU_INIT_POINTER(dev->vlan_info, NULL); call_rcu(&vlan_info->rcu, vlan_info_rcu_free); However, the pointer 'grp' still points to that memory since it is set before vlan_vid_del(): vlan_info = rtnl_dereference(dev->vlan_info); if (!vlan_info) goto out; grp = &vlan_info->grp; Depends on when that RCU callback is scheduled, we could trigger a use-after-free in vlan_group_for_each_dev() right following this vlan_vid_del(). Fix it by moving vlan_vid_del() before setting grp. This is also symmetric to the vlan_vid_add() we call in vlan_device_event(). Reported-by: Fengguang Wu <fengguang.wu@intel.com> Fixes: efc73f4bbc23 ("net: Fix memory leak - vlan_info struct") Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Girish Moodalbail <girish.moodalbail@oracle.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Girish Moodalbail <girish.moodalbail@oracle.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11tooling/headers: Sync the tools/include/uapi/drm/i915_drm.h UAPI headerIngo Molnar1-0/+1
Last minute upstream update to one of the UAPI headers - sync it with tooling, to address this warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h' Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-11Merge branch 'perf/urgent' of ↵Ingo Molnar2-2/+13
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf tooling fixes from Arnaldo Carvalho de Melo. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-11net: dsa: return after vlan prepare phaseVivien Didelot1-0/+2
The current code does not return after successfully preparing the VLAN addition on every ports member of a it. Fix this. Fixes: 1ca4aa9cd4cc ("net: dsa: check VLAN capability of every switch") Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11net: dsa: return after mdb prepare phaseVivien Didelot1-0/+2
The current code does not return after successfully preparing the MDB addition on every ports member of a multicast group. Fix this. Fixes: a1a6b7ea7f2d ("net: dsa: add cross-chip multicast support") Reported-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>

Privacy Policy