AgeCommit message (Collapse)AuthorFilesLines
2018-01-13firewire: net: max MTU off by oneStefan Richter1-1/+6
The latest max_mtu patch missed that datagram_size is actually one less than the datagram's Total Length. Fixes: 357f4aae859b ("firewire: net: really fix maximum possible MTU") Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2017-11-12Linux 4.14v4.14Linus Torvalds1-1/+1
2017-11-12Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds7-19/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of small fixes: - make KGDB work again which got broken by the conversion of WARN() to #UD. The WARN fixup needs to run before the notifier callchain, otherwise KGDB tries to handle it and crashes. - disable KASAN in the ORC unwinder to prevent false positive KASAN warnings - prevent default mapping above 47bit when 5 level page tables are enabled - make the delay calibration optimization work correctly, which had the conditionals the wrong way around and was operating on data which was not yet updated. - remove the bogus X86_TRAP_BP trap init from the default IDT init table, which broke 32bit int3 handling by overwriting the correct int3 setup. - replace this_cpu* with boot_cpu_data access in the preemptible oprofile init code" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/debug: Handle warnings before the notifier chain, to fix KGDB crash x86/mm: Fix ELF_ET_DYN_BASE for 5-level paging x86/idt: Remove X86_TRAP_BP initialization in idt_setup_traps() x86/oprofile/ppro: Do not use __this_cpu*() in preemptible context x86/unwind: Disable KASAN checking in the ORC unwinder x86/smpboot: Make optimization of delay calibration work correctly
2017-11-12Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds3-2/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tool fixes from Thomas Gleixner: "A small set of fixes for perf tool: - synchronize the i915 drm header to avoid the 'out of date' warning - make sure that perf trace cleans up its temporary files on exit - unbreak the build with newer flex versions - add missing braces in the eBPF parsing rules" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tooling/headers: Sync the tools/include/uapi/drm/i915_drm.h UAPI header perf trace: Call machine__exit() at exit perf tools: Fix eBPF event specification parsing perf tools: Add "reject" option for parse-events.l
2017-11-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds15-34/+68
Pull networking fixes from David Miller: 1) Use after free in vlan, from Cong Wang. 2) Handle NAPI poll with a zero budget properly in mlx5 driver, from Saeed Mahameed. 3) If DMA mapping fails in mlx5 driver, NULL out page, from Inbar Karmy. 4) Handle overrun in RX FIFO of sun4i CAN driver, from Gerhard Bertelsmann. 5) Missing return in mdb and vlan prepare phase of DSA layer, from Vivien Didelot. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: vlan: fix a use-after-free in vlan_device_event() net: dsa: return after vlan prepare phase net: dsa: return after mdb prepare phase can: ifi: Fix transmitter delay calculation tcp: fix tcp_fastretrans_alert warning tcp: gso: avoid refcount_t warning from tcp_gso_segment() can: peak: Add support for new PCIe/M2 CAN FD interfaces can: sun4i: handle overrun in RX FIFO can: c_can: don't indicate triple sampling support for D_CAN net/mlx5e: Increase Striding RQ minimum size limit to 4 multi-packet WQEs net/mlx5e: Set page to null in case dma mapping fails net/mlx5e: Fix napi poll with zero budget net/mlx5: Cancel health poll before sending panic teardown command net/mlx5: Loop over temp list to release delay events rds: ib: Fix NULL pointer dereference in debug code
2017-11-11Merge tag 'linux-can-fixes-for-4.14-20171110' of ↵David S. Miller5-9/+25
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2017-11-10 this is a pull request for net/master. The first patch by Richard Schütz for the c_can driver removes the false indication to support triple sampling for d_can. Gerhard Bertelsmann's patch for the sun4i driver improves the RX overrun handling. The patch by Stephane Grosjean for the peak_canfd driver adds the PCI ids for various new PCIe/M2 interfaces. Marek Vasut's patch for the ifi driver fix transmitter delay calculation. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11Merge tag 'mlx5-fixes-2017-11-08' of ↵David S. Miller5-13/+20
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2017-11-08 The following series includes some fixes for mlx5 core and etherent driver. Sorry for the late submission but as you can see i have some very critical fixes below that i would like them merged into this RC. Please pull and let me know if there is any problem. For -stable: ('net/mlx5e: Set page to null in case dma mapping fails') kernels >= 4.13 ('net/mlx5: FPGA, return -EINVAL if size is zero') kernels >= 4.13 ('net/mlx5: Cancel health poll before sending panic teardown command') kernels >= 4.13 V1->V2: - Fix Reviewed-by tag of the 2nd patch. - Drop the FPGA 0 size fix, it needs some more change log info. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11vlan: fix a use-after-free in vlan_device_event()Cong Wang1-3/+3
After refcnt reaches zero, vlan_vid_del() could free dev->vlan_info via RCU: RCU_INIT_POINTER(dev->vlan_info, NULL); call_rcu(&vlan_info->rcu, vlan_info_rcu_free); However, the pointer 'grp' still points to that memory since it is set before vlan_vid_del(): vlan_info = rtnl_dereference(dev->vlan_info); if (!vlan_info) goto out; grp = &vlan_info->grp; Depends on when that RCU callback is scheduled, we could trigger a use-after-free in vlan_group_for_each_dev() right following this vlan_vid_del(). Fix it by moving vlan_vid_del() before setting grp. This is also symmetric to the vlan_vid_add() we call in vlan_device_event(). Reported-by: Fengguang Wu <fengguang.wu@intel.com> Fixes: efc73f4bbc23 ("net: Fix memory leak - vlan_info struct") Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Girish Moodalbail <girish.moodalbail@oracle.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Girish Moodalbail <girish.moodalbail@oracle.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11tooling/headers: Sync the tools/include/uapi/drm/i915_drm.h UAPI headerIngo Molnar1-0/+1
Last minute upstream update to one of the UAPI headers - sync it with tooling, to address this warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h' Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-11Merge branch 'perf/urgent' of ↵Ingo Molnar2-2/+13
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf tooling fixes from Arnaldo Carvalho de Melo. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-11net: dsa: return after vlan prepare phaseVivien Didelot1-0/+2
The current code does not return after successfully preparing the VLAN addition on every ports member of a it. Fix this. Fixes: 1ca4aa9cd4cc ("net: dsa: check VLAN capability of every switch") Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11net: dsa: return after mdb prepare phaseVivien Didelot1-0/+2
The current code does not return after successfully preparing the MDB addition on every ports member of a multicast group. Fix this. Fixes: a1a6b7ea7f2d ("net: dsa: add cross-chip multicast support") Reported-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10Merge tag 'ceph-for-4.14-rc9' of git://github.com/ceph/ceph-clientLinus Torvalds1-2/+2
Pull ceph gix from Ilya Dryomov: "Memory allocation flags fix, marked for stable" * tag 'ceph-for-4.14-rc9' of git://github.com/ceph/ceph-client: rbd: use GFP_NOIO for parent stat and data requests
2017-11-10Merge branch 'for-linus' of ↵Linus Torvalds3-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer updates from Dmitry Torokhov: - a new ACPI ID for Elan touchpad found in yet another Ideapad model - Synaptics RMI4 will allow binding to controllers reporting SMB version 3 (note that we are not adding any new ACPI IDs to the Synaptics PS/2 drover so unless user explicitly enables intertouch support there is no user-visible change) - a fixup to TSC 2004/5 touchscreen driver to mark input devices as "direct" to help userspace identify the type of device they are dealing with * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics-rmi4 - RMI4 can also use SMBUS version 3 Input: tsc200x-core - set INPUT_PROP_DIRECT Input: elan_i2c - add ELAN060C to the ACPI table
2017-11-10Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-10/+29
Pull KVM fix from Radim Krčmář: "Fix PPC HV host crash that can occur as a result of resizing the guest hashed page table" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Book3S HV: Fix exclusion between HPT resizing and other HPT updates
2017-11-10Merge tag 'mips_fixes_4.14_2' of ↵Linus Torvalds3-4/+7
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS fixes from James Hogan: "A final few MIPS fixes for 4.14: - fix BMIPS NULL pointer dereference (4.7) - fix AR7 early GPIO init allocation failure (3.19) - fix dead serial output on certain AR7 platforms (2.6.35)" * tag 'mips_fixes_4.14_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: AR7: Ensure that serial ports are properly set up MIPS: AR7: Defer registration of GPIO MIPS: BMIPS: Fix missing cbr address
2017-11-10.mailmap: Add Maciej W. Rozycki's Imagination e-mail addressMaciej W. Rozycki1-0/+1
Following my recent transition from Imagination Technologies to the=20 reincarnated MIPS company add a .mailmap mapping for my work address, so that `scripts/get_maintainer.pl' gets it right for past commits. Signed-off-by: Maciej W. Rozycki <macro@mips.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-10Revert "x86: CPU: Fix up "cpu MHz" in /proc/cpuinfo"Linus Torvalds3-11/+6
This reverts commit 941f5f0f6ef5338814145cf2b813cf1f98873e2f. Sadly, it turns out that we really can't just do the cross-CPU IPI to all CPU's to get their proper frequencies, because it's much too expensive on systems with lots of cores. So we'll have to revert this for now, and revisit it using a smarter model (probably doing one system-wide IPI at open time, and doing all the frequency calculations in parallel). Reported-by: WANG Chao <chao.wang@ucloud.cn> Reported-by: Ingo Molnar <mingo@kernel.org> Cc: Rafael J Wysocki <rafael.j.wysocki@intel.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-10Merge tag 'drm-fixes-for-v4.14-rc9' of ↵Linus Torvalds5-18/+20
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Last few patches to wrap up. Two i915 fixes that are on their way to stable, one vmware black screen bug, and one const patch that I was going to drop, but it was clearly a pretty safe one liner" * tag 'drm-fixes-for-v4.14-rc9' of git://people.freedesktop.org/~airlied/linux: drm/i915: Deconstruct struct sgt_dma initialiser drm/i915: Reject unknown syncobj flags drm/vmwgfx: Fix Ubuntu 17.10 Wayland black screen issue drm/vmwgfx: constify vmw_fence_ops
2017-11-10can: ifi: Fix transmitter delay calculationMarek Vasut1-3/+3
The CANFD transmitter delay calculation formula was updated in the latest software drop from IFI and improves the behavior of the IFI CANFD core during bitrate switching. Use the new formula to improve stability of the CANFD operation. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Markus Marb <markus@marb.org> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-11-10tcp: fix tcp_fastretrans_alert warningYuchung Cheng1-2/+1
This patch fixes the cause of an WARNING indicatng TCP has pending retransmission in Open state in tcp_fastretrans_alert(). The root cause is a bad interaction between path mtu probing, if enabled, and the RACK loss detection. Upong receiving a SACK above the sequence of the MTU probing packet, RACK could mark the probe packet lost in tcp_fastretrans_alert(), prior to calling tcp_simple_retransmit(). tcp_simple_retransmit() only enters Loss state if it newly marks the probe packet lost. If the probe packet is already identified as lost by RACK, the sender remains in Open state with some packets marked lost and retransmitted. Then the next SACK would trigger the warning. The likely scenario is that the probe packet was lost due to its size or network congestion. The actual impact of this warning is small by potentially entering fast recovery an ACK later. The simple fix is always entering recovery (Loss) state if some packet is marked lost during path MTU probing. Fixes: a0370b3f3f2c ("tcp: enable RACK loss detection to trigger recovery") Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Reported-by: Roman Gushchin <guro@fb.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10tcp: gso: avoid refcount_t warning from tcp_gso_segment()Eric Dumazet1-2/+10
When a GSO skb of truesize O is segmented into 2 new skbs of truesize N1 and N2, we want to transfer socket ownership to the new fresh skbs. In order to avoid expensive atomic operations on a cache line subject to cache bouncing, we replace the sequence : refcount_add(N1, &sk->sk_wmem_alloc); refcount_add(N2, &sk->sk_wmem_alloc); // repeated by number of segments refcount_sub(O, &sk->sk_wmem_alloc); by a single refcount_add(sum_of(N) - O, &sk->sk_wmem_alloc); Problem is : In some pathological cases, sum(N) - O might be a negative number, and syzkaller bot was apparently able to trigger this trace [1] atomic_t was ok with this construct, but we need to take care of the negative delta with refcount_t [1] refcount_t: saturated; leaking memory. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 8404 at lib/refcount.c:77 refcount_add_not_zero+0x198/0x200 lib/refcount.c:77 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 8404 Comm: syz-executor2 Not tainted 4.14.0-rc5-mm1+ #20 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x41c kernel/panic.c:183 __warn+0x1c4/0x1e0 kernel/panic.c:546 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:177 do_trap_no_signal arch/x86/kernel/traps.c:211 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:260 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:297 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:310 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905 RIP: 0010:refcount_add_not_zero+0x198/0x200 lib/refcount.c:77 RSP: 0018:ffff8801c606e3a0 EFLAGS: 00010282 RAX: 0000000000000026 RBX: 0000000000001401 RCX: 0000000000000000 RDX: 0000000000000026 RSI: ffffc900036fc000 RDI: ffffed0038c0dc68 RBP: ffff8801c606e430 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8801d97f5eba R11: 0000000000000000 R12: ffff8801d5acf73c R13: 1ffff10038c0dc75 R14: 00000000ffffffff R15: 00000000fffff72f refcount_add+0x1b/0x60 lib/refcount.c:101 tcp_gso_segment+0x10d0/0x16b0 net/ipv4/tcp_offload.c:155 tcp4_gso_segment+0xd4/0x310 net/ipv4/tcp_offload.c:51 inet_gso_segment+0x60c/0x11c0 net/ipv4/af_inet.c:1271 skb_mac_gso_segment+0x33f/0x660 net/core/dev.c:2749 __skb_gso_segment+0x35f/0x7f0 net/core/dev.c:2821 skb_gso_segment include/linux/netdevice.h:3971 [inline] validate_xmit_skb+0x4ba/0xb20 net/core/dev.c:3074 __dev_queue_xmit+0xe49/0x2070 net/core/dev.c:3497 dev_queue_xmit+0x17/0x20 net/core/dev.c:3538 neigh_hh_output include/net/neighbour.h:471 [inline] neigh_output include/net/neighbour.h:479 [inline] ip_finish_output2+0xece/0x1460 net/ipv4/ip_output.c:229 ip_finish_output+0x85e/0xd10 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:238 [inline] ip_output+0x1cc/0x860 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:459 [inline] ip_local_out+0x95/0x160 net/ipv4/ip_output.c:124 ip_queue_xmit+0x8c6/0x18e0 net/ipv4/ip_output.c:504 tcp_transmit_skb+0x1ab7/0x3840 net/ipv4/tcp_output.c:1137 tcp_write_xmit+0x663/0x4de0 net/ipv4/tcp_output.c:2341 __tcp_push_pending_frames+0xa0/0x250 net/ipv4/tcp_output.c:2513 tcp_push_pending_frames include/net/tcp.h:1722 [inline] tcp_data_snd_check net/ipv4/tcp_input.c:5050 [inline] tcp_rcv_established+0x8c7/0x18a0 net/ipv4/tcp_input.c:5497 tcp_v4_do_rcv+0x2ab/0x7d0 net/ipv4/tcp_ipv4.c:1460 sk_backlog_rcv include/net/sock.h:909 [inline] __release_sock+0x124/0x360 net/core/sock.c:2264 release_sock+0xa4/0x2a0 net/core/sock.c:2776 tcp_sendmsg+0x3a/0x50 net/ipv4/tcp.c:1462 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:763 sock_sendmsg_nosec net/socket.c:632 [inline] sock_sendmsg+0xca/0x110 net/socket.c:642 ___sys_sendmsg+0x31c/0x890 net/socket.c:2048 __sys_sendmmsg+0x1e6/0x5f0 net/socket.c:2138 Fixes: 14afee4b6092 ("net: convert sock.sk_wmem_alloc from atomic_t to refcount_t") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10can: peak: Add support for new PCIe/M2 CAN FD interfacesStephane Grosjean1-2/+12
This adds support for the following PEAK-System CAN FD interfaces: PCAN-cPCIe FD CAN FD Interface for cPCI Serial (2 or 4 channels) PCAN-PCIe/104-Express CAN FD Interface for PCIe/104-Express (1, 2 or 4 ch.) PCAN-miniPCIe FD CAN FD Interface for PCIe Mini (1, 2 or 4 channels) PCAN-PCIe FD OEM CAN FD Interface for PCIe OEM version (1, 2 or 4 ch.) PCAN-M.2 CAN FD Interface for M.2 (1 or 2 channels) Like the PCAN-PCIe FD interface, all of these boards run the same IP Core that is able to handle CAN FD (see also http://www.peak-system.com). Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-11-10can: sun4i: handle overrun in RX FIFOGerhard Bertelsmann1-2/+10
SUN4Is CAN IP has a 64 byte deep FIFO buffer. If the buffer is not drained fast enough (overrun) it's getting mangled. Already received frames are dropped - the data can't be restored. Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-11-10can: c_can: don't indicate triple sampling support for D_CANRichard Schütz2-2/+0
The D_CAN controller doesn't provide a triple sampling mode, so don't set the CAN_CTRLMODE_3_SAMPLES flag in ctrlmode_supported. Currently enabling triple sampling is a no-op. Signed-off-by: Richard Schütz <rschuetz@uni-koblenz.de> Cc: linux-stable <stable@vger.kernel.org> # >= v3.6 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-11-10x86/debug: Handle warnings before the notifier chain, to fix KGDB crashAlexander Shishkin1-3/+7
Commit: 9a93848fe787 ("x86/debug: Implement __WARN() using UD0") turned warnings into UD0, but the fixup code only runs after the notify_die() chain. This is a problem, in particular, with kgdb, which kicks in as if it was a BUG(). Fix this by running the fixup code before the notifier chain in the invalid op handler path. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Ilya Dryomov <idryomov@gmail.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Weinberger <richard.weinberger@gmail.com> Cc: <stable@vger.kernel.org> # v4.12+ Link: http://lkml.kernel.org/r/20170724100428.19173-1-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-10net/mlx5e: Increase Striding RQ minimum size limit to 4 multi-packet WQEsEugenia Emantayev1-1/+1
This is to prevent the case of working with a single MPWQE (1 WQE is always reserved as RQ is linked-list). When the WQE is fully consumed, HW should still have available buffer in order not to drop packets. Fixes: 461017cb006a ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)") Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-11-10net/mlx5e: Set page to null in case dma mapping failsInbar Karmy1-7/+5
Currently, when dma mapping fails, put_page is called, but the page is not set to null. Later, in the page_reuse treatment in mlx5e_free_rx_descs(), mlx5e_page_release() is called for the second time, improperly doing dma_unmap (for a non-mapped address) and an extra put_page. Prevent this by nullifying the page pointer when dma_map fails. Fixes: accd58833237 ("net/mlx5e: Introduce RX Page-Reuse") Signed-off-by: Inbar Karmy <inbark@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-11-10net/mlx5e: Fix napi poll with zero budgetSaeed Mahameed1-4/+6
napi->poll can be called with budget 0, e.g. in netpoll scenarios where the caller only wants to poll TX rings (poll_one_napi@net/core/netpoll.c). The below commit changed RX polling from "while" loop to "do {} while", which caused to ignore the initial budget and handle at least one RX packet. This fixes the following warning: [ 2852.049194] mlx5e_napi_poll+0x0/0x260 [mlx5_core] exceeded budget in poll [ 2852.049195] ------------[ cut here ]------------ [ 2852.049195] WARNING: CPU: 0 PID: 25691 at net/core/netpoll.c:171 netpoll_poll_dev+0x18a/0x1a0 Fixes: 4b7dfc992514 ("net/mlx5e: Early-return on empty completion queues") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Reported-by: Martin KaFai Lau <kafai@fb.com> Tested-by: Martin KaFai Lau <kafai@fb.com> Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-11-10net/mlx5: Cancel health poll before sending panic teardown commandHuy Nguyen1-0/+7
After the panic teardown firmware command, health_care detects the error in PCI bus and calls the mlx5_pci_err_detected. This health_care flow is no longer needed because the panic teardown firmware command will bring down the PCI bus communication with the HCA. The solution is to cancel the health care timer and its pending workqueue request before sending panic teardown firmware command. Kernel trace: mlx5_core 0033:01:00.0: Shutdown was called mlx5_core 0033:01:00.0: health_care:154:(pid 9304): handling bad device here mlx5_core 0033:01:00.0: mlx5_handle_bad_state:114:(pid 9304): NIC state 1 mlx5_core 0033:01:00.0: mlx5_pci_err_detected was called mlx5_core 0033:01:00.0: mlx5_enter_error_state:96:(pid 9304): start mlx5_3:mlx5_ib_event:3061:(pid 9304): warning: event on port 0 mlx5_core 0033:01:00.0: mlx5_enter_error_state:104:(pid 9304): end Unable to handle kernel paging request for data at address 0x0000003f Faulting instruction address: 0xc0080000434b8c80 Fixes: 8812c24d28f4 ('net/mlx5: Add fast unload support in shutdown flow') Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-11-10net/mlx5: Loop over temp list to release delay eventsHuy Nguyen1-1/+1
list_splice_init initializing waiting_events_list after splicing it to temp list, therefore we should loop over temp list to fire the events. Fixes: 4ca637a20a52 ("net/mlx5: Delay events till mlx5 interface's add complete for pci resume") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-11-10rds: ib: Fix NULL pointer dereference in debug codeHåkon Bugge1-5/+5
rds_ib_recv_refill() is a function that refills an IB receive queue. It can be called from both the CQE handler (tasklet) and a worker thread. Just after the call to ib_post_recv(), a debug message is printed with rdsdebug(): ret = ib_post_recv(ic->i_cm_id->qp, &recv->r_wr, &failed_wr); rdsdebug("recv %p ibinc %p page %p addr %lu ret %d\n", recv, recv->r_ibinc, sg_page(&recv->r_frag->f_sg), (long) ib_sg_dma_address( ic->i_cm_id->device, &recv->r_frag->f_sg), ret); Now consider an invocation of rds_ib_recv_refill() from the worker thread, which is preemptible. Further, assume that the worker thread is preempted between the ib_post_recv() and rdsdebug() statements. Then, if the preemption is due to a receive CQE event, the rds_ib_recv_cqe_handler() will be invoked. This function processes receive completions, including freeing up data structures, such as the recv->r_frag. In this scenario, rds_ib_recv_cqe_handler() will process the receive WR posted above. That implies, that the recv->r_frag has been freed before the above rdsdebug() statement has been executed. When it is later executed, we will have a NULL pointer dereference: [ 4088.068008] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [ 4088.076754] IP: rds_ib_recv_refill+0x87/0x620 [rds_rdma] [ 4088.082686] PGD 0 P4D 0 [ 4088.085515] Oops: 0000 [#1] SMP [ 4088.089015] Modules linked in: rds_rdma(OE) rds(OE) rpcsec_gss_krb5(E) nfsv4(E) dns_resolver(E) nfs(E) fscache(E) mlx4_ib(E) ib_ipoib(E) rdma_ucm(E) ib_ucm(E) ib_uverbs(E) ib_umad(E) rdma_cm(E) ib_cm(E) iw_cm(E) ib_core(E) binfmt_misc(E) sb_edac(E) intel_powerclamp(E) coretemp(E) kvm_intel(E) kvm(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) ghash_clmulni_intel(E) pcbc(E) aesni_intel(E) crypto_simd(E) iTCO_wdt(E) glue_helper(E) iTCO_vendor_support(E) sg(E) cryptd(E) pcspkr(E) ipmi_si(E) ipmi_devintf(E) ipmi_msghandler(E) shpchp(E) ioatdma(E) i2c_i801(E) wmi(E) lpc_ich(E) mei_me(E) mei(E) mfd_core(E) nfsd(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) sunrpc(E) ip_tables(E) ext4(E) mbcache(E) jbd2(E) fscrypto(E) mgag200(E) i2c_algo_bit(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) [ 4088.168486] fb_sys_fops(E) ahci(E) ixgbe(E) libahci(E) ttm(E) mdio(E) ptp(E) pps_core(E) drm(E) sd_mod(E) libata(E) crc32c_intel(E) mlx4_core(E) i2c_core(E) dca(E) megaraid_sas(E) dm_mirror(E) dm_region_hash(E) dm_log(E) dm_mod(E) [last unloaded: rds] [ 4088.193442] CPU: 20 PID: 1244 Comm: kworker/20:2 Tainted: G OE 4.14.0-rc7.master.20171105.ol7.x86_64 #1 [ 4088.205097] Hardware name: Oracle Corporation ORACLE SERVER X5-2L/ASM,MOBO TRAY,2U, BIOS 31110000 03/03/2017 [ 4088.216074] Workqueue: ib_cm cm_work_handler [ib_cm] [ 4088.221614] task: ffff885fa11d0000 task.stack: ffffc9000e598000 [ 4088.228224] RIP: 0010:rds_ib_recv_refill+0x87/0x620 [rds_rdma] [ 4088.234736] RSP: 0018:ffffc9000e59bb68 EFLAGS: 00010286 [ 4088.240568] RAX: 0000000000000000 RBX: ffffc9002115d050 RCX: ffffc9002115d050 [ 4088.248535] RDX: ffffffffa0521380 RSI: ffffffffa0522158 RDI: ffffffffa0525580 [ 4088.256498] RBP: ffffc9000e59bbf8 R08: 0000000000000005 R09: 0000000000000000 [ 4088.264465] R10: 0000000000000339 R11: 0000000000000001 R12: 0000000000000000 [ 4088.272433] R13: ffff885f8c9d8000 R14: ffffffff81a0a060 R15: ffff884676268000 [ 4088.280397] FS: 0000000000000000(0000) GS:ffff885fbec80000(0000) knlGS:0000000000000000 [ 4088.289434] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4088.295846] CR2: 0000000000000020 CR3: 0000000001e09005 CR4: 00000000001606e0 [ 4088.303816] Call Trace: [ 4088.306557] rds_ib_cm_connect_complete+0xe0/0x220 [rds_rdma] [ 4088.312982] ? __dynamic_pr_debug+0x8c/0xb0 [ 4088.317664] ? __queue_work+0x142/0x3c0 [ 4088.321944] rds_rdma_cm_event_handler+0x19e/0x250 [rds_rdma] [ 4088.328370] cma_ib_handler+0xcd/0x280 [rdma_cm] [ 4088.333522] cm_process_work+0x25/0x120 [ib_cm] [ 4088.338580] cm_work_handler+0xd6b/0x17aa [ib_cm] [ 4088.343832] process_one_work+0x149/0x360 [ 4088.348307] worker_thread+0x4d/0x3e0 [ 4088.352397] kthread+0x109/0x140 [ 4088.355996] ? rescuer_thread+0x380/0x380 [ 4088.360467] ? kthread_park+0x60/0x60 [ 4088.364563] ret_from_fork+0x25/0x30 [ 4088.368548] Code: 48 89 45 90 48 89 45 98 eb 4d 0f 1f 44 00 00 48 8b 43 08 48 89 d9 48 c7 c2 80 13 52 a0 48 c7 c6 58 21 52 a0 48 c7 c7 80 55 52 a0 <4c> 8b 48 20 44 89 64 24 08 48 8b 40 30 49 83 e1 fc 48 89 04 24 [ 4088.389612] RIP: rds_ib_recv_refill+0x87/0x620 [rds_rdma] RSP: ffffc9000e59bb68 [ 4088.397772] CR2: 0000000000000020 [ 4088.401505] ---[ end trace fe922e6ccf004431 ]--- This bug was provoked by compiling rds out-of-tree with EXTRA_CFLAGS="-DRDS_DEBUG -DDEBUG" and inserting an artificial delay between the rdsdebug() and ib_ib_port_recv() statements: /* XXX when can this fail? */ ret = ib_post_recv(ic->i_cm_id->qp, &recv->r_wr, &failed_wr); + if (can_wait) + usleep_range(1000, 5000); rdsdebug("recv %p ibinc %p page %p addr %lu ret %d\n", recv, recv->r_ibinc, sg_page(&recv->r_frag->f_sg), (long) ib_sg_dma_address( The fix is simply to move the rdsdebug() statement up before the ib_post_recv() and remove the printing of ret, which is taken care of anyway by the non-debug code. Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Reviewed-by: Knut Omang <knut.omang@oracle.com> Reviewed-by: Wei Lin Guay <wei.lin.guay@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09Merge branch 'akpm' (patches from Andrew)Linus Torvalds3-12/+15
Merge misc fixes from Andrew Morton: "2 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: MAINTAINERS: update TPM driver infrastructure changes sysctl: add register_sysctl() dummy helper
2017-11-09MAINTAINERS: update TPM driver infrastructure changesJarkko Sakkinen2-12/+10
[akpm@linux-foundation.org: alpha-sort CREDITS, per Randy] Link: http://lkml.kernel.org/r/20170915223811.21368-1-jarkko.sakkinen@linux.intel.com Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: Marcel Selhorst <tpmdd@selhorst.net> Cc: Ashley Lai <ashleydlai@gmail.com> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Borislav Petkov <bp@suse.de> Cc: Håvard Skinnemoen <hskinnemoen@gmail.com> Cc: Martin Kepplinger <martink@posteo.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: David S. Miller <davem@davemloft.net> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-09sysctl: add register_sysctl() dummy helperArnd Bergmann1-0/+5
register_sysctl() has been around for five years with commit fea478d4101a ("sysctl: Add register_sysctl for normal sysctl users") but now that arm64 started using it, I ran into a compile error: arch/arm64/kernel/armv8_deprecated.c: In function 'register_insn_emulation_sysctl': arch/arm64/kernel/armv8_deprecated.c:257:2: error: implicit declaration of function 'register_sysctl' This adds a inline function like we already have for register_sysctl_paths() and register_sysctl_table(). Link: http://lkml.kernel.org/r/20171106133700.558647-1-arnd@arndb.de Fixes: 38b9aeb32fa7 ("arm64: Port deprecated instruction emulation to new sysctl interface") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "Luis R. Rodriguez" <mcgrof@kernel.org> Cc: Alex Benne <alex.bennee@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-09Merge tag 'pci-v4.14-fixes-7' of ↵Linus Torvalds1-2/+10
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI maintainership updates from Bjorn Helgaas: "Update MAINTAINERS for HiSilicon, Microsemi Switchtec, and native host bridge drivers (Gabriele Paoloni, Sebastian Andrzej Siewior). Note that starting with changes intended for v4.16, Lorenzo Pieralisi will maintain the drivers/pci/{dwc,endpoint,host} directories. My intent is to continue to merge those changes via my tree, so this should be transparent to you" * tag 'pci-v4.14-fixes-7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Add Lorenzo Pieralisi for PCI host bridge drivers MAINTAINERS: Remove Gabriele Paoloni as HiSilicon PCI maintainer MAINTAINERS: Remove Stephen Bates as Microsemi Switchtec maintainer
2017-11-09Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-10/+18
Pull ARM fix from Russell King: "Last ARM fix for 4.14. This plugs a hole in dump_instr(), which, with certain conditions satisfied, can dump instructions from kernel space" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8720/1: ensure dump_instr() checks addr_limit
2017-11-09Merge tag 'pm-final-4.14' of ↵Linus Torvalds2-5/+29
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull final power management fixes from Rafael Wysocki: "These fix a regression in the schedutil cpufreq governor introduced by a recent change and blacklist Dell XPS13 9360 from using the Low Power S0 Idle _DSM interface which triggers serious problems on one of these machines. Specifics: - Prevent the schedutil cpufreq governor from using the utilization of a wrong CPU in some cases which started to happen after one of the recent changes in it (Chris Redpath). - Blacklist Dell XPS13 9360 from using the Low Power S0 Idle _DSM interface as that causes serious issue (related to NVMe) to appear on one of these machines, even though the other Dells XPS13 9360 in somewhat different HW configurations behave correctly (Rafael Wysocki)" * tag 'pm-final-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PM: Blacklist Low Power S0 Idle _DSM for Dell XPS13 9360 cpufreq: schedutil: Examine the correct CPU when we update util
2017-11-09Merge tag 'sound-4.14' of ↵Linus Torvalds9-17/+97
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "The amount of the changes isn't as quite small as wished, nevertheless they are straight fixes that deserve merging to 4.14 final. Most of fixes are about ALSA core bugs spotted by fuzzer: a follow-up fix for the previous nested rwsem patch, a fix to avoid the resource hogs due to too many concurrent ALSA timer invocations, and a fix for a crash with SYSEX MIDI transfer over OSS sequencer emulation that is used by none but fuzzer. The rest are usual HD-audio and USB-audio device-specific quirks, which are safe to apply" * tag 'sound-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - fix headset mic problem for Dell machines with alc274 ALSA: seq: Fix OSS sysex delivery in OSS emulation ALSA: seq: Avoid invalid lockdep class warning ALSA: timer: Limit max instances per timer ALSA: usb-audio: support new Amanero Combo384 firmware version
2017-11-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds46-146/+285
Pull networking fixes from David Miller: 1) Fix use-after-free in IPSEC input parsing, desintation address pointer was loaded before pskb_may_pull() which can change the SKB data pointers. From Florian Westphal. 2) Stack out-of-bounds read in xfrm_state_find(), from Steffen Klassert. 3) IPVS state of SKB is not properly reset when moving between namespaces, from Ye Yin. 4) Fix crash in asix driver suspend and resume, from Andrey Konovalov. 5) Don't deliver ipv6 l2tp tunnel packets to ipv4 l2tp tunnels, and vice versa, from Guillaume Nault. 6) Fix DSACK undo on non-dup ACKs, from Priyaranjan Jha. 7) Fix regression in bond_xmit_hash()'s behavior after the TCP port selection changes back in 4.2, from Hangbin Liu. 8) Two divide by zero bugs in USB networking drivers when parsing descriptors, from Bjorn Mork. 9) Fix bonding slaves being stuck in BOND_LINK_FAIL state, from Jay Vosburgh. 10) Missing skb_reset_mac_header() in qmi_wwan, from Kristian Evensen. 11) Fix the destruction of tc action object races properly, from Cong Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (31 commits) cls_u32: use tcf_exts_get_net() before call_rcu() cls_tcindex: use tcf_exts_get_net() before call_rcu() cls_rsvp: use tcf_exts_get_net() before call_rcu() cls_route: use tcf_exts_get_net() before call_rcu() cls_matchall: use tcf_exts_get_net() before call_rcu() cls_fw: use tcf_exts_get_net() before call_rcu() cls_flower: use tcf_exts_get_net() before call_rcu() cls_flow: use tcf_exts_get_net() before call_rcu() cls_cgroup: use tcf_exts_get_net() before call_rcu() cls_bpf: use tcf_exts_get_net() before call_rcu() cls_basic: use tcf_exts_get_net() before call_rcu() net_sched: introduce tcf_exts_get_net() and tcf_exts_put_net() Revert "net_sched: hold netns refcnt for each action" net: usb: asix: fill null-ptr-deref in asix_suspend Revert "net: usb: asix: fill null-ptr-deref in asix_suspend" qmi_wwan: Add missing skb_reset_mac_header-call bonding: fix slave stuck in BOND_LINK_FAIL state qrtr: Move to postcore_initcall net: qmi_wwan: fix divide by 0 on bad descriptors net: cdc_ether: fix divide by 0 on bad descriptors ...
2017-11-09x86/mm: Fix ELF_ET_DYN_BASE for 5-level pagingKirill A. Shutemov1-1/+1
On machines with 5-level paging we don't want to allocate mapping above 47-bit unless user explicitly asked for it. See b569bab78d8d ("x86/mm: Prepare to expose larger address space to userspace") for details. c715b72c1ba4 ("mm: revert x86_64 and arm64 ELF_ET_DYN_BASE base changes") broke the behaviour. After the commit elf binary and heap got mapped above 47-bits. Use DEFAULT_MAP_WINDOW instead of TASK_SIZE to determine ELF_ET_DYN_BASE so it's forced to be below 47-bits unconditionally. Fixes: c715b72c1ba4 ("mm: revert x86_64 and arm64 ELF_ET_DYN_BASE base changes") Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: linux-mm@kvack.org Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/20171107103804.47341-1-kirill.shutemov@linux.intel.com
2017-11-09perf trace: Call machine__exit() at exitAndrei Vagin1-0/+10
Otherwise 'perf trace' leaves a temporary file /tmp/perf-vdso.so-XXXXXX. $ perf trace -o log true $ ls -l /tmp/perf-vdso.* -rw------- 1 root root 8192 Nov 8 03:08 /tmp/perf-vdso.so-5bCpD0 Signed-off-by: Andrei Vagin <avagin@openvz.org> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vasily Averin <vvs@virtuozzo.com> Link: http://lkml.kernel.org/r/20171108002246.8924-1-avagin@openvz.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-09perf tools: Fix eBPF event specification parsingJiri Olsa1-2/+2
Looks like I've reached the new level of stupidity, adding missing braces. Committer testing: Given the following eBPF C filter, that will add a record when it returns true, i.e. when the tv_nsec variable is > 2000ns, should be built and installed via sys_bpf(), but fails to do so before this patch: # cat filter.c #include <uapi/linux/bpf.h> #define SEC(NAME) __attribute__((section(NAME), used)) SEC("func=hrtimer_nanosleep rqtp->tv_nsec") int func(void *ctx, int err, long nsec) { return nsec > 1000; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; # # perf trace -e nanosleep,filter.c usleep 1 invalid or unsupported event: 'filter.c' Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # And works again after it is applied, the nothing is inserted when the co # perf trace -e *sleep,filter.c usleep 1 0.000 ( 0.066 ms): usleep/23994 nanosleep(rqtp: 0x7ffead94a0d0) = 0 # perf trace -e *sleep,filter.c usleep 2 0.000 ( 0.008 ms): usleep/24378 nanosleep(rqtp: 0x7fffa021ba50) ... 0.008 ( ): perf_bpf_probe:func:(ffffffffb410cb30) tv_nsec=2000) 0.000 ( 0.066 ms): usleep/24378 ... [continued]: nanosleep()) = 0 # The intent of 9445464bb831 is kept: # perf stat -e 'cpu/uops_executed.core,krava/' true event syntax error: '..cuted.core,krava/' \___ unknown term valid terms: cmask,pc,event,edge,in_tx,any,ldlat,inv,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event> event selector. use 'perf list' to list available events # # perf stat -e 'cpu/uops_executed.core,period=1/' true Performance counter stats for 'true': 808,332 cpu/uops_executed.core,period=1/ 0.002997237 seconds time elapsed # Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 9445464bb831 ("perf tools: Unwind properly location after REJECT") Link: http://lkml.kernel.org/n/tip-diea0ihbwpxfw6938huv3whj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-09perf tools: Add "reject" option for parse-events.lJiri Olsa1-0/+1
Arnaldo reported broken builds in some distros using a newer flex release, 2.6.4, found in Alpine Linux 3.6 and Edge, with flex not spotting the REJECT macro: CC /tmp/build/perf/util/parse-events-flex.o util/parse-events.l: In function 'parse_events_lex': /tmp/build/perf/util/parse-events-flex.c:4734:16: error: \ 'reject_used_but_not_detected' undeclared (first use in this function) It's happening because we put the REJECT under another USER_REJECT macro in following commit: 9445464bb831 perf tools: Unwind properly location after REJECT Fortunately flex provides option for force it to use REJECT, adding it to parse-events.l. Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org> Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Reviewed-by: Andi Kleen <andi@firstfloor.org> Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 9445464bb831 ("perf tools: Unwind properly location after REJECT") Link: http://lkml.kernel.org/n/tip-7kdont984mw12ijk7rji6b8p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-09rbd: use GFP_NOIO for parent stat and data requestsIlya Dryomov1-2/+2
rbd_img_obj_exists_submit() and rbd_img_obj_parent_read_full() are on the writeback path for cloned images -- we attempt a stat on the parent object to see if it exists and potentially read it in to call copyup. GFP_NOIO should be used instead of GFP_KERNEL here. Cc: stable@vger.kernel.org Link: http://tracker.ceph.com/issues/22014 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: David Disseldorp <ddiss@suse.de>
2017-11-09ALSA: hda - fix headset mic problem for Dell machines with alc274Hui Wang1-0/+5
Confirmed with Kailang of Realtek, the pin 0x19 is for Headset Mic, and the pin 0x1a is for Headphone Mic, he suggested to apply ALC269_FIXUP_DELL1_MIC_NO_PRESENCE to fix this problem. And we verified applying this FIXUP can fix this problem. Cc: <stable@vger.kernel.org> Cc: Kailang Yang <kailang@realtek.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-11-09Merge branch 'master' of ↵David S. Miller2-38/+37
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2017-11-09 1) Fix a use after free due to a reallocated skb head. From Florian Westphal. 2) Fix sporadic lookup failures on labeled IPSEC. From Florian Westphal. 3) Fix a stack out of bounds when a socket policy is applied to an IPv6 socket that sends IPv4 packets. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09Merge tag 'drm-intel-fixes-2017-11-08' of ↵drm-fixes-for-v4.14-rc9Dave Airlie3-16/+18
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix possible NULL dereference (Chris). - Avoid miss usage of syncobj by rejecting unknown flags (Tvrtko). * tag 'drm-intel-fixes-2017-11-08' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Deconstruct struct sgt_dma initialiser drm/i915: Reject unknown syncobj flags
2017-11-09Merge branch 'net-sched-race-fix'David S. Miller31-63/+198
Cong Wang says: ==================== net_sched: close the race between call_rcu() and cleanup_net() This patchset tries to fix the race between call_rcu() and cleanup_net() again. Without holding the netns refcnt the tc_action_net_exit() in netns workqueue could be called before filter destroy works in tc filter workqueue. This patchset moves the netns refcnt from tc actions to tcf_exts, without breaking per-netns tc actions. Patch 1 reverts the previous fix, patch 2 introduces two new API's to help to address the bug and the rest patches switch to the new API's. Please see each patch for details. I was not able to reproduce this bug, but now after adding some delay in filter destroy work I manage to trigger the crash. After this patchset, the crash is not reproducible any more and the debugging printk's show the order is expected too. ==================== Fixes: ddf97ccdd7cb ("net_sched: add network namespace support for tc actions") Reported-by: Lucas Bates <lucasb@mojatatu.com> Cc: Lucas Bates <lucasb@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09cls_u32: use tcf_exts_get_net() before call_rcu()Cong Wang1-1/+7
Hold netns refcnt before call_rcu() and release it after the tcf_exts_destroy() is done. Note, on ->destroy() path we have to respect the return value of tcf_exts_get_net(), on other paths it should always return true, so we don't need to care. Cc: Lucas Bates <lucasb@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Privacy Policy