aboutsummaryrefslogtreecommitdiffstats
path: root/arch/openrisc/lib
AgeCommit message (Collapse)AuthorFilesLines
2017-11-13Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds1-1/+1
Pull OpenRISC updates from Stafford Horne: "The OpenRISC work is a bit more interesting this time, adding SMP support and a few general cleanups. Small Things: - Move OpenRISC docs into Documentation and clean them up - Document previously undocumented devicetree bindings - Update the or1ksim dts to use stdout-path OpenRISC SMP support details: - First the "use shadow registers" and "define CPU_BIG_ENDIAN as true" get the architecture ready for SMP. - The "add 1 and 2 byte cmpxchg support" and "use qspinlocks and qrwlocks" add the SMP locking infrastructure as needed. Using the qspinlocks and qrwlocks as suggested by Peter Z while reviewing the original spinlocks implementation. - The "support for ompic" adds a new irqchip device which is used for IPI communication to support SMP. - The "initial SMP support" adds smp.c and makes changes to all of the necessary data-structures to be per-cpu. The remaining patches are bug fixes and debug helpers which I wanted to keep separate from the "initial SMP support" in order to allow them to be reviewed on their own. This includes: - add cacheflush support to fix icache aliasing - fix initial preempt state for secondary cpu tasks - sleep instead of spin on secondary wait - support framepointers and STACKTRACE_SUPPORT - enable LOCKDEP_SUPPORT and irqflags tracing - timer sync: Add tick timer sync logic - fix possible deadlock in timer sync, pointed out by mips guys Note: the irqchip patch was reviewed with Marc and we agreed to push it together with these patches" * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: fix possible deadlock scenario during timer sync openrisc: pass endianness info to sparse openrisc: add tick timer multi-core sync logic openrisc: enable LOCKDEP_SUPPORT and irqflags tracing openrisc: support framepointers and STACKTRACE_SUPPORT openrisc: add simple_smp dts and defconfig for simulators openrisc: add cacheflush support to fix icache aliasing openrisc: sleep instead of spin on secondary wait openrisc: fix initial preempt state for secondary cpu tasks openrisc: initial SMP support irqchip: add initial support for ompic dt-bindings: add openrisc to vendor prefixes list openrisc: use qspinlocks and qrwlocks openrisc: add 1 and 2 byte cmpxchg support openrisc: use shadow registers to save regs on exception dt-bindings: openrisc: Add OpenRISC platform SoC Documentation: openrisc: Updates to README Documentation: Move OpenRISC docs out of arch/ MAINTAINERS: Add OpenRISC pic maintainer openrisc: dts: or1ksim: Add stdout-path
2017-11-03openrisc: initial SMP supportStefan Kristiansson1-1/+1
This patch introduces the SMP support for the OpenRISC architecture. The SMP architecture requires cores which have multi-core features which have been introduced a few years back including: - New SPRS SPR_COREID SPR_NUMCORES - Shadow SPRs - Atomic Instructions - Cache Coherency - A wired in IPI controller This patch adds all of the SMP specific changes to core infrastructure, it looks big but it needs to go all together as its hard to split this one up. Boot loader spinning of second cpu is not supported yet, it's assumed that Linux is booted straight after cpu reset. The bulk of these changes are trivial changes to refactor to use per cpu data structures throughout. The addition of the smp.c and changes in time.c are the changes. Some specific notes: MM changes ---------- The reason why this is created as an array, and not with DEFINE_PER_CPU is that doing it this way, we'll save a load in the tlb-miss handler (the load from __per_cpu_offset). TLB Flush --------- The SMP implementation of flush_tlb_* works by sending out a function-call IPI to all the non-local cpus by using the generic on_each_cpu() function. Currently, all flush_tlb_* functions will result in a flush_tlb_all(), which has always been the behaviour in the UP case. CPU INFO -------- This creates a per cpu cpuinfo struct and fills it out accordingly for each activated cpu. show_cpuinfo is also updated to reflect new version information in later versions of the spec. SMP API ------- This imitates the arm64 implementation by having a smp_cross_call callback that can be set by set_smp_cross_call to initiate an IPI and a handle_IPI function that is expected to be called from an IPI irqchip driver. Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> [shorne@gmail.com: added cpu stop, checkpatch fixes, wrote commit message] Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-15openrisc: Switch to use export.h instead of module.hStafford Horne1-1/+2
Reduce dependencies on module.h since all we need here is export.h for EXPORT_SYMBOL. Fixes: f50169324df4 ("module.h: split out the EXPORT_SYMBOL into export.h") Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-25arch/openrisc/lib/memcpy.c: use correct OR1200 optionValentin Rothberg1-1/+1
The Kconfig option for OR12000 is OR1K_1200. Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-25openrisc: Add optimized memcpy routineStafford Horne2-1/+125
The generic memcpy routine provided in kernel does only byte copies. Using word copies we can lower boot time and cycles spend in memcpy quite significantly. Booting on my de0 nano I see boot times go from 7.2 to 5.6 seconds. The avg cycles in memcpy during boot go from 6467 to 1887. I tested several algorithms (see code in previous patch mails) The implementations I tested and avg cycles: - Word Copies + Loop Unrolls + Non Aligned 1882 - Word Copies + Loop Unrolls 1887 - Word Copies 2441 - Byte Copies + Loop Unrolls 6467 - Byte Copies 7600 In the end I ended up going with Word Copies + Loop Unrolls as it provides best tradeoff between simplicity and boot speedups. Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-25openrisc: Add optimized memsetOlof Kindgren2-1/+99
This adds a hand-optimized assembler version of memset and sets __HAVE_ARCH_MEMSET to use this version instead of the generic C routine Signed-off-by: Olof Kindgren <olof.kindgren@gmail.com> Signed-off-by: Stafford Horne <shorne@gmail.com>
2013-01-03ARCH: drivers remove __dev* attributes.Greg Kroah-Hartman1-1/+1
This fixes up all of the smaller arches that had __dev* markings for their platform-specific drivers. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Bob Liu <lliubbo@gmail.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Myron Stowe <myron.stowe@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Thierry Reding <thierry.reding@avionic-design.de> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Cc: Mark Salter <msalter@redhat.com> Cc: Yong Zhang <yong.zhang0@gmail.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Jan Glauber <jang@linux.vnet.ibm.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-01openrisc: delay: fix handling of counter overflowWill Deacon1-2/+2
If the counter overflows during a __delay operation, we will exit the loop prematurely. For example, calling __delay(0x100) with the counter at 0xffffff00 gives us a target of 0x0. The unsigned comparison in the while loop will likely be false on the first iteration (if the counter is now anything other than 0) and we will return early. This patch fixes the problem by comparing deltas in the loop rather than absolute values. Cc: Jon Masters <jcm@redhat.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-09-01openrisc: delay: fix loops calculation for __const_udelayWill Deacon1-1/+1
The openrisc implementation of __const_udelay casts the result of a 32-bit multiplication to 64 bits and passes the top 32 bits to __delay. Since there are no casts on the arguments, this results in a __delay of zero, regardless of the xloops parameter. This patch fixes the problem by casting xloops to (unsigned long long), ensuring that the multiplication is not truncated. Cc: Jon Masters <jcm@redhat.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-05-27openrisc: use generic strnlen_user() functionJonas Bonn1-47/+0
The generic version is both easier to support and more correct. Signed-off-by: Jonas Bonn <jonas@southpole.se> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-25openrisc: use generic strncpy_from_userJonas Bonn1-52/+0
As per commits 2922585b9329 ("lib: Sparc's strncpy_from_user is generic enough, move under lib/") and 92ae03f2ef99 ("x86: merge 32/64-bit versions of 'strncpy_from_user()' and speed it up"), and corresponding discussion on linux-arch. Signed-off-by: Jonas Bonn <jonas@southpole.se> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-22OpenRISC: Library routinesJonas Bonn2-0/+264
Signed-off-by: Jonas Bonn <jonas@southpole.se> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22OpenRISC: Build infrastructureJonas Bonn1-0/+5
Signed-off-by: Jonas Bonn <jonas@southpole.se> Reviewed-by: Arnd Bergmann <arnd@arndb.de>

Privacy Policy