aboutsummaryrefslogtreecommitdiffstats
path: root/arch/sparc
AgeCommit message (Collapse)AuthorFilesLines
2018-02-11unify {de,}mangle_poll(), get rid of kernel-side POLL...Al Viro1-24/+4
except, again, POLLFREE and POLL_BUSY_LOOP. With this, we finally get to the promised end result: - POLL{IN,OUT,...} are plain integers and *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06Merge tag 'libnvdimm-for-4.16' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Ross Zwisler: - Require struct page by default for filesystem DAX to remove a number of surprising failure cases. This includes failures with direct I/O, gdb and fork(2). - Add support for the new Platform Capabilities Structure added to the NFIT in ACPI 6.2a. This new table tells us whether the platform supports flushing of CPU and memory controller caches on unexpected power loss events. - Revamp vmem_altmap and dev_pagemap handling to clean up code and better support future future PCI P2P uses. - Deprecate the ND_IOCTL_SMART_THRESHOLD command whose payload has become out-of-sync with recent versions of the NVDIMM_FAMILY_INTEL spec, and instead rely on the generic ND_CMD_CALL approach used by the two other IOCTL families, NVDIMM_FAMILY_{HPE,MSFT}. - Enhance nfit_test so we can test some of the new things added in version 1.6 of the DSM specification. This includes testing firmware download and simulating the Last Shutdown State (LSS) status. * tag 'libnvdimm-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (37 commits) libnvdimm, namespace: remove redundant initialization of 'nd_mapping' acpi, nfit: fix register dimm error handling libnvdimm, namespace: make min namespace size 4K tools/testing/nvdimm: force nfit_test to depend on instrumented modules libnvdimm/nfit_test: adding support for unit testing enable LSS status libnvdimm/nfit_test: add firmware download emulation nfit-test: Add platform cap support from ACPI 6.2a to test libnvdimm: expose platform persistence attribute for nd_region acpi: nfit: add persistent memory control flag for nd_region acpi: nfit: Add support for detect platform CPU cache flush on power loss device-dax: Fix trailing semicolon libnvdimm, btt: fix uninitialized err_lock dax: require 'struct page' by default for filesystem dax ext2: auto disable dax instead of failing mount ext4: auto disable dax instead of failing mount mm, dax: introduce pfn_t_special() mm: Fix devm_memremap_pages() collision handling mm: Fix memory size alignment in devm_memremap_pages_release() memremap: merge find_dev_pagemap into get_dev_pagemap memremap: change devm_memremap_pages interface to use struct dev_pagemap ...
2018-02-01Merge tag 'clk-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The core framework has a handful of patches this time around, mostly due to the clk rate protection support added by Jerome Brunet. This feature will allow consumers to lock in a certain rate on the output of a clk so that things like audio playback don't hear pops when the clk frequency changes due to shared parent clks changing rates. Currently the clk API doesn't guarantee the rate of a clk stays at the rate you request after clk_set_rate() is called, so this new API will allow drivers to express that requirement. Beyond this, the core got some debugfs pretty printing patches and a couple minor non-critical fixes. Looking outside of the core framework diff we have some new driver additions and the removal of a legacy TI clk driver. Both of these hit high in the dirstat. Also, the removal of the asm-generic/clkdev.h file causes small one-liners in all the architecture Kbuild files. Overall, the driver diff seems to be the normal stuff that comes all the time to fix little problems here and there and to support new hardware. Summary: Core: - Clk rate protection - Symbolic clk flags in debugfs output - Clk registration enabled clks while doing bookkeeping updates New Drivers: - Spreadtrum SC9860 - HiSilicon hi3660 stub - Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS - Amlogic Meson-AXG - ASPEED BMC Removed Drivers: - TI OMAP 3xxx legacy clk (non-DT) support - asm*/clkdev.h got removed (not really a driver) Updates: - Renesas FDP1-0 module clock on R-Car M3-W - Renesas LVDS module clock on R-Car V3M - Misc fixes to pr_err() prints - Qualcomm MSM8916 audio fixes - Qualcomm IPQ8074 rounded out support for more peripherals - Qualcomm Alpha PLL variants - Divider code was using container_of() on bad pointers - Allwinner DE2 clks on H3 - Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED - Mediatek clk driver compile test support - AT91 PMC clk suspend/resume restoration support - PLL issues fixed on si5351 - Broadcom IProc PLL calculation updates - DVFS support for Armada mvebu CPU clks - Allwinner fixed post-divider support - TI clkctrl fixes and support for newer SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits) clk: aspeed: Handle inverse polarity of USB port 1 clock gate clk: aspeed: Fix return value check in aspeed_cc_init() clk: aspeed: Add reset controller clk: aspeed: Register gated clocks clk: aspeed: Add platform driver and register PLLs clk: aspeed: Register core clocks clk: Add clock driver for ASPEED BMC SoCs clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built clk: fix reentrancy of clk_enable() on UP systems clk: meson-axg: fix potential NULL dereference in axg_clkc_probe() clk: Simplify debugfs registration clk: Fix debugfs_create_*() usage clk: Show symbolic clock flags in debugfs clk: renesas: r8a7796: Add FDP clock clk: Move __clk_{get,put}() into private clk.h API clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks clk: Improve flags doc for of_clk_detect_critical() arch: Remove clkdev.h asm-generic from Kbuild clk: sunxi-ng: a83t: Add M divider to TCON1 clock clk: Prepare to remove asm-generic/clkdev.h ...
2018-02-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-nextLinus Torvalds6-4/+288
Pull sparc updates from David Miller: "Of note is the addition of a driver for the Data Analytics Accelerator, and some small cleanups" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: oradax: Fix return value check in dax_attach() sparc: vDSO: remove an extra tab sparc64: drop unneeded compat include sparc64: Oracle DAX driver sparc64: Oracle DAX infrastructure
2018-01-31Merge branch 'work.whack-a-mole' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull asm/uaccess.h whack-a-mole from Al Viro: "It's linux/uaccess.h, damnit... Oh, well - eventually they'll stop cropping up..." * 'work.whack-a-mole' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: asm-prototypes.h: use linux/uaccess.h, not asm/uaccess.h riscv: use linux/uaccess.h, not asm/uaccess.h... ppc: for put_user() pull linux/uaccess.h, not asm/uaccess.h
2018-01-31Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-6/+19
Merge updates from Andrew Morton: - misc fixes - ocfs2 updates - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits) mm: remove PG_highmem description tools, vm: new option to specify kpageflags file mm/swap.c: make functions and their kernel-doc agree mm, memory_hotplug: fix memmap initialization mm: correct comments regarding do_fault_around() mm: numa: do not trap faults on shared data section pages. hugetlb, mbind: fall back to default policy if vma is NULL hugetlb, mempolicy: fix the mbind hugetlb migration mm, hugetlb: further simplify hugetlb allocation API mm, hugetlb: get rid of surplus page accounting tricks mm, hugetlb: do not rely on overcommit limit during migration mm, hugetlb: integrate giga hugetlb more naturally to the allocation path mm, hugetlb: unify core page allocation accounting and initialization mm/memcontrol.c: try harder to decrease [memory,memsw].limit_in_bytes mm/memcontrol.c: make local symbol static mm/hmm: fix uninitialized use of 'entry' in hmm_vma_walk_pmd() include/linux/mmzone.h: fix explanation of lower bits in the SPARSEMEM mem_map pointer mm/compaction.c: fix comment for try_to_compact_pages() mm/page_ext.c: make page_ext_init a noop when CONFIG_PAGE_EXTENSION but nothing uses it zsmalloc: use U suffix for negative literals being shifted ...
2018-01-31sparc64: update pmdp_invalidate() to return old pmd valueNitin Gupta2-6/+19
It's required to avoid losing dirty and accessed bits. [akpm@linux-foundation.org: add a `do' to the do-while loop] Link: http://lkml.kernel.org/r/20171213105756.69879-9-kirill.shutemov@linux.intel.com Signed-off-by: Nitin Gupta <nitin.m.gupta@oracle.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Miller <davem@davemloft.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2-27/+41
Pull networking updates from David Miller: 1) Significantly shrink the core networking routing structures. Result of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf 2) Add netdevsim driver for testing various offloads, from Jakub Kicinski. 3) Support cross-chip FDB operations in DSA, from Vivien Didelot. 4) Add a 2nd listener hash table for TCP, similar to what was done for UDP. From Martin KaFai Lau. 5) Add eBPF based queue selection to tun, from Jason Wang. 6) Lockless qdisc support, from John Fastabend. 7) SCTP stream interleave support, from Xin Long. 8) Smoother TCP receive autotuning, from Eric Dumazet. 9) Lots of erspan tunneling enhancements, from William Tu. 10) Add true function call support to BPF, from Alexei Starovoitov. 11) Add explicit support for GRO HW offloading, from Michael Chan. 12) Support extack generation in more netlink subsystems. From Alexander Aring, Quentin Monnet, and Jakub Kicinski. 13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From Russell King. 14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso. 15) Many improvements and simplifications to the NFP driver bpf JIT, from Jakub Kicinski. 16) Support for ipv6 non-equal cost multipath routing, from Ido Schimmel. 17) Add resource abstration to devlink, from Arkadi Sharshevsky. 18) Packet scheduler classifier shared filter block support, from Jiri Pirko. 19) Avoid locking in act_csum, from Davide Caratti. 20) devinet_ioctl() simplifications from Al viro. 21) More TCP bpf improvements from Lawrence Brakmo. 22) Add support for onlink ipv6 route flag, similar to ipv4, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits) tls: Add support for encryption using async offload accelerator ip6mr: fix stale iterator net/sched: kconfig: Remove blank help texts openvswitch: meter: Use 64-bit arithmetic instead of 32-bit tcp_nv: fix potential integer overflow in tcpnv_acked r8169: fix RTL8168EP take too long to complete driver initialization. qmi_wwan: Add support for Quectel EP06 rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK ipmr: Fix ptrdiff_t print formatting ibmvnic: Wait for device response when changing MAC qlcnic: fix deadlock bug tcp: release sk_frag.page in tcp_disconnect ipv4: Get the address of interface correctly. net_sched: gen_estimator: fix lockdep splat net: macb: Handle HRESP error net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring ipv6: addrconf: break critical section in addrconf_verify_rtnl() ipv6: change route cache aging logic i40e/i40evf: Update DESC_NEEDED value to reflect larger value bnxt_en: cleanup DIM work on device shutdown ...
2018-01-31Merge branch 'linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Enforce the setting of keys for keyed aead/hash/skcipher algorithms. - Add multibuf speed tests in tcrypt. Algorithms: - Improve performance of sha3-generic. - Add native sha512 support on arm64. - Add v8.2 Crypto Extentions version of sha3/sm3 on arm64. - Avoid hmac nesting by requiring underlying algorithm to be unkeyed. - Add cryptd_max_cpu_qlen module parameter to cryptd. Drivers: - Add support for EIP97 engine in inside-secure. - Add inline IPsec support to chelsio. - Add RevB core support to crypto4xx. - Fix AEAD ICV check in crypto4xx. - Add stm32 crypto driver. - Add support for BCM63xx platforms in bcm2835 and remove bcm63xx. - Add Derived Key Protocol (DKP) support in caam. - Add Samsung Exynos True RNG driver. - Add support for Exynos5250+ SoCs in exynos PRNG driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (166 commits) crypto: picoxcell - Fix error handling in spacc_probe() crypto: arm64/sha512 - fix/improve new v8.2 Crypto Extensions code crypto: arm64/sm3 - new v8.2 Crypto Extensions implementation crypto: arm64/sha3 - new v8.2 Crypto Extensions implementation crypto: testmgr - add new testcases for sha3 crypto: sha3-generic - export init/update/final routines crypto: sha3-generic - simplify code crypto: sha3-generic - rewrite KECCAK transform to help the compiler optimize crypto: sha3-generic - fixes for alignment and big endian operation crypto: aesni - handle zero length dst buffer crypto: artpec6 - remove select on non-existing CRYPTO_SHA384 hwrng: bcm2835 - Remove redundant dev_err call in bcm2835_rng_probe() crypto: stm32 - remove redundant dev_err call in stm32_cryp_probe() crypto: axis - remove unnecessary platform_get_resource() error check crypto: testmgr - test misuse of result in ahash crypto: inside-secure - make function safexcel_try_push_requests static crypto: aes-generic - fix aes-generic regression on powerpc crypto: chelsio - Fix indentation warning crypto: arm64/sha1-ce - get rid of literal pool crypto: arm64/sha2-ce - move the round constant table to .rodata section ...
2018-01-30Merge branch 'misc.poll' of ↵Linus Torvalds1-4/+24
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...
2018-01-30Merge branch 'siginfo-linus' of ↵Linus Torvalds2-128/+0
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull siginfo cleanups from Eric Biederman: "Long ago when 2.4 was just a testing release copy_siginfo_to_user was made to copy individual fields to userspace, possibly for efficiency and to ensure initialized values were not copied to userspace. Unfortunately the design was complex, it's assumptions unstated, and humans are fallible and so while it worked much of the time that design failed to ensure unitialized memory is not copied to userspace. This set of changes is part of a new design to clean up siginfo and simplify things, and hopefully make the siginfo handling robust enough that a simple inspection of the code can be made to ensure we don't copy any unitializied fields to userspace. The design is to unify struct siginfo and struct compat_siginfo into a single definition that is shared between all architectures so that anyone adding to the set of information shared with struct siginfo can see the whole picture. Hopefully ensuring all future si_code assignments are arch independent. The design is to unify copy_siginfo_to_user32 and copy_siginfo_from_user32 so that those function are complete and cope with all of the different cases documented in signinfo_layout. I don't think there was a single implementation of either of those functions that was complete and correct before my changes unified them. The design is to introduce a series of helpers including force_siginfo_fault that take the values that are needed in struct siginfo and build the siginfo structure for their callers. Ensuring struct siginfo is built correctly. The remaining work for 4.17 (unless someone thinks it is post -rc1 material) is to push usage of those helpers down into the architectures so that architecture specific code will not need to deal with the fiddly work of intializing struct siginfo, and then when struct siginfo is guaranteed to be fully initialized change copy siginfo_to_user into a simple wrapper around copy_to_user. Further there is work in progress on the issues that have been documented requires arch specific knowledge to sort out. The changes below fix or at least document all of the issues that have been found with siginfo generation. Then proceed to unify struct siginfo the 32 bit helpers that copy siginfo to and from userspace, and generally clean up anything that is not arch specific with regards to siginfo generation. It is a lot but with the unification you can of siginfo you can already see the code reduction in the kernel" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (45 commits) signal/memory-failure: Use force_sig_mceerr and send_sig_mceerr mm/memory_failure: Remove unused trapno from memory_failure signal/ptrace: Add force_sig_ptrace_errno_trap and use it where needed signal/powerpc: Remove unnecessary signal_code parameter of do_send_trap signal: Helpers for faults with specialized siginfo layouts signal: Add send_sig_fault and force_sig_fault signal: Replace memset(info,...) with clear_siginfo for clarity signal: Don't use structure initializers for struct siginfo signal/arm64: Better isolate the COMPAT_TASK portion of ptrace_hbptriggered ptrace: Use copy_siginfo in setsiginfo and getsiginfo signal: Unify and correct copy_siginfo_to_user32 signal: Remove the code to clear siginfo before calling copy_siginfo_from_user32 signal: Unify and correct copy_siginfo_from_user32 signal/blackfin: Remove pointless UID16_SIGINFO_COMPAT_NEEDED signal/blackfin: Move the blackfin specific si_codes to asm-generic/siginfo.h signal/tile: Move the tile specific si_codes to asm-generic/siginfo.h signal/frv: Move the frv specific si_codes to asm-generic/siginfo.h signal/ia64: Move the ia64 specific si_codes to asm-generic/siginfo.h signal/powerpc: Remove redefinition of NSIGTRAP on powerpc signal: Move addr_lsb into the _sigfault union for clarity ...
2018-01-29Merge tag 'init_task-20180117' of ↵Linus Torvalds2-6/+0
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull init_task initializer cleanups from David Howells: "It doesn't seem useful to have the init_task in a header file rather than in a normal source file. We could consolidate init_task handling instead and expand out various macros. Here's a series of patches that consolidate init_task handling: (1) Make THREAD_SIZE available to vmlinux.lds for cris, hexagon and openrisc. (2) Alter the INIT_TASK_DATA linker script macro to set init_thread_union and init_stack rather than defining these in C. Insert init_task and init_thread_into into the init_stack area in the linker script as appropriate to the configuration, with different section markers so that they end up correctly ordered. We can then get merge ia64's init_task.c into the main one. We then have a bunch of single-use INIT_*() macros that seem only to be macros because they used to be used per-arch. We can then expand these in place of the user and get rid of a few lines and a lot of backslashes. (3) Expand INIT_TASK() in place. (4) Expand in place various small INIT_*() macros that are defined conditionally. Expand them and surround them by #if[n]def/#endif in the .c file as it takes fewer lines. (5) Expand INIT_SIGNALS() and INIT_SIGHAND() in place. (6) Expand INIT_STRUCT_PID in place. These macros can then be discarded" * tag 'init_task-20180117' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: Expand INIT_STRUCT_PID and remove Expand the INIT_SIGNALS and INIT_SIGHAND macros and remove Expand various INIT_* macros and remove Expand INIT_TASK() in init/init_task.c and remove Construct init thread stack in the linker script rather than by union openrisc: Make THREAD_SIZE available to vmlinux.lds hexagon: Make THREAD_SIZE available to vmlinux.lds cris: Make THREAD_SIZE available to vmlinux.lds
2018-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-18/+0
Alexei Starovoitov says: ==================== pull-request: bpf-next 2018-01-26 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) A number of extensions to tcp-bpf, from Lawrence. - direct R or R/W access to many tcp_sock fields via bpf_sock_ops - passing up to 3 arguments to bpf_sock_ops functions - tcp_sock field bpf_sock_ops_cb_flags for controlling callbacks - optionally calling bpf_sock_ops program when RTO fires - optionally calling bpf_sock_ops program when packet is retransmitted - optionally calling bpf_sock_ops program when TCP state changes - access to tclass and sk_txhash - new selftest 2) div/mod exception handling, from Daniel. One of the ugly leftovers from the early eBPF days is that div/mod operations based on registers have a hard-coded src_reg == 0 test in the interpreter as well as in JIT code generators that would return from the BPF program with exit code 0. This was basically adopted from cBPF interpreter for historical reasons. There are multiple reasons why this is very suboptimal and prone to bugs. To name one: the return code mapping for such abnormal program exit of 0 does not always match with a suitable program type's exit code mapping. For example, '0' in tc means action 'ok' where the packet gets passed further up the stack, which is just undesirable for such cases (e.g. when implementing policy) and also does not match with other program types. After considering _four_ different ways to address the problem, we adapt the same behavior as on some major archs like ARMv8: X div 0 results in 0, and X mod 0 results in X. aarch64 and aarch32 ISA do not generate any traps or otherwise aborts of program execution for unsigned divides. Given the options, it seems the most suitable from all of them, also since major archs have similar schemes in place. Given this is all in the realm of undefined behavior, we still have the option to adapt if deemed necessary. 3) sockmap sample refactoring, from John. 4) lpm map get_next_key fixes, from Yonghong. 5) test cleanups, from Alexei and Prashant. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-26bpf, sparc64: remove obsolete exception handling from div/modDaniel Borkmann1-18/+0
Since we've changed div/mod exception handling for src_reg in eBPF verifier itself, remove the leftovers from sparc64 JIT. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-01-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24sparc64: fix typo in CONFIG_CRYPTO_DES_SPARC64 => CONFIG_CRYPTO_CAMELLIA_SPARC64Corentin Labbe1-1/+1
This patch fixes the typo CONFIG_CRYPTO_DES_SPARC64 => CONFIG_CRYPTO_CAMELLIA_SPARC64 Fixes: 81658ad0d923 ("sparc64: Add CAMELLIA driver making use of the new camellia opcodes.") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22sparc: vDSO: remove an extra tabDan Carpenter1-1/+1
This statement is indented one tab too far which is confusing and leads to a Smatch warning: arch/sparc/vdso/vma.c:254 arch_setup_additional_pages() warn: curly braces intended? Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Nagarathnam Muthusamy <nagarathnam.muthusamy@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22sparc64: drop unneeded compat includeRolf Eike Beer1-3/+0
The last user of compat_old_sigset_t was removed in commit 2d7d5f05111a9d913131a2764d8b20157f8f758d. Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22sparc64: Oracle DAX driverRob Gardner1-0/+91
DAX is a coprocessor which resides on the SPARC M7 (DAX1) and M8 (DAX2) processor chips, and has direct access to the CPU's L3 caches as well as physical memory. It can perform several operations on data streams with various input and output formats. This driver provides a transport mechanism and has limited knowledge of the various opcodes and data formats. A user space library provides high level services and translates these into low level commands which are then passed into the driver and subsequently the hypervisor and the coprocessor. The library is the recommended way for applications to use the coprocessor, and the driver interface is not intended for general use. Signed-off-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: Jonathan Helman <jonathan.helman@oracle.com> Signed-off-by: Sanath Kumar <sanath099@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22sparc64: Oracle DAX infrastructureRob Gardner3-0/+196
This patch adds hypercall function stubs and C templates for ccb_submit/info/kill which provide coprocessor services for the Oracle Data Analytics Accelerator, registration for the DAX api group, and all the various associated constants. Signed-off-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: Jonathan Helman <jonathan.helman@oracle.com> Signed-off-by: Sanath Kumar <sanath099@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-19bpf: get rid of pure_initcall dependency to enable jitsDaniel Borkmann2-4/+0
Having a pure_initcall() callback just to permanently enable BPF JITs under CONFIG_BPF_JIT_ALWAYS_ON is unnecessary and could leave a small race window in future where JIT is still disabled on boot. Since we know about the setting at compilation time anyway, just initialize it properly there. Also consolidate all the individual bpf_jit_enable variables into a single one and move them under one location. Moreover, don't allow for setting unspecified garbage values on them. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-01-15signal: Unify and correct copy_siginfo_to_user32Eric W. Biederman2-55/+0
Among the existing architecture specific versions of copy_siginfo_to_user32 there are several different implementation problems. Some architectures fail to handle all of the cases in in the siginfo union. Some architectures perform a blind copy of the siginfo union when the si_code is negative. A blind copy suggests the data is expected to be in 32bit siginfo format, which means that receiving such a signal via signalfd won't work, or that the data is in 64bit siginfo and the code is copying nonsense to userspace. Create a single instance of copy_siginfo_to_user32 that all of the architectures can share, and teach it to handle all of the cases in the siginfo union correctly, with the assumption that siginfo is stored internally to the kernel is 64bit siginfo format. A special case is made for x86 x32 format. This is needed as presence of both x32 and ia32 on x86_64 results in two different 32bit signal formats. By allowing this small special case there winds up being exactly one code base that needs to be maintained between all of the architectures. Vastly increasing the testing base and the chances of finding bugs. As the x86 copy of copy_siginfo_to_user32 the call of the x86 signal_compat_build_tests were moved into sigaction_compat_abi, so that they will keep running. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-15signal: Unify and correct copy_siginfo_from_user32Eric W. Biederman1-16/+0
The function copy_siginfo_from_user32 is used for two things, in ptrace since the dawn of siginfo for arbirarily modifying a signal that user space sees, and in sigqueueinfo to send a signal with arbirary siginfo data. Create a single copy of copy_siginfo_from_user32 that all architectures share, and teach it to handle all of the cases in the siginfo union. In the generic version of copy_siginfo_from_user32 ensure that all of the fields in siginfo are initialized so that the siginfo structure can be safely copied to userspace if necessary. When copying the embedded sigval union copy the si_int member. That ensures the 32bit values passes through the kernel unchanged. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-15signal: unify compat_siginfo_tAl Viro1-56/+0
--EWB Added #ifdef CONFIG_X86_X32_ABI to arch/x86/kernel/signal_compat.c Changed #ifdef CONFIG_X86_X32 to #ifdef CONFIG_X86_X32_ABI in linux/compat.h CONFIG_X86_X32 is set when the user requests X32 support. CONFIG_X86_X32_ABI is set when the user requests X32 support and the tool-chain has X32 allowing X32 support to be built. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2018-01-12signal: Remove _sys_private and _overrun_incr from struct compat_siginfoEric W. Biederman1-1/+0
We have never passed either field to or from userspace so just remove them. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-12crypto: hash - annotate algorithms taking optional keyEric Biggers1-0/+1
We need to consistently enforce that keyed hashes cannot be used without setting the key. To do this we need a reliable way to determine whether a given hash algorithm is keyed or not. AF_ALG currently does this by checking for the presence of a ->setkey() method. However, this is actually slightly broken because the CRC-32 algorithms implement ->setkey() but can also be used without a key. (The CRC-32 "key" is not actually a cryptographic key but rather represents the initial state. If not overridden, then a default initial state is used.) Prepare to fix this by introducing a flag CRYPTO_ALG_OPTIONAL_KEY which indicates that the algorithm has a ->setkey() method, but it is not required to be called. Then set it on all the CRC-32 algorithms. The same also applies to the Adler-32 implementation in Lustre. Also, the cryptd and mcryptd templates have to pass through the flag from their underlying algorithm. Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-09Construct init thread stack in the linker script rather than by unionDavid Howells2-6/+0
Construct the init thread stack in the linker script rather than doing it by means of a union so that ia64's init_task.c can be got rid of. The following symbols are then made available from INIT_TASK_DATA() linker script macro: init_thread_union init_stack INIT_TASK_DATA() also expands the region to THREAD_SIZE to accommodate the size of the init stack. init_thread_union is given its own section so that it can be placed into the stack space in the right order. I'm assuming that the ia64 ordering is correct and that the task_struct is first and the thread_info second. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com> Tested-by: Will Deacon <will.deacon@arm.com> (arm64) Tested-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
2018-01-08mm: pass the vmem_altmap to vmemmap_freeChristoph Hellwig1-1/+2
We can just pass this on instead of having to do a radix tree lookup without proper locking a few levels into the callchain. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-01-08mm: pass the vmem_altmap to vmemmap_populateChristoph Hellwig1-1/+1
We can just pass this on instead of having to do a radix tree lookup without proper locking a few levels into the callchain. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-01-03arch: Remove clkdev.h asm-generic from KbuildStephen Boyd1-1/+0
Now that every architecture is using the generic clkdev.h file and we no longer include asm/clkdev.h anywhere in the tree, we can remove it. Cc: Russell King <linux@armlinux.org.uk> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: <linux-arch@vger.kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-4/+40
Daniel Borkmann says: ==================== pull-request: bpf-next 2017-12-28 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Fix incorrect state pruning related to recognition of zero initialized stack slots, where stacksafe exploration would mistakenly return a positive pruning verdict too early ignoring other slots, from Gianluca. 2) Various BPF to BPF calls related follow-up fixes. Fix an off-by-one in maximum call depth check, and rework maximum stack depth tracking logic to fix a bypass of the total stack size check reported by Jann. Also fix a bug in arm64 JIT where prog->jited_len was uninitialized. Addition of various test cases to BPF selftests, from Alexei. 3) Addition of a BPF selftest to test_verifier that is related to BPF to BPF calls which demonstrates a late caller stack size increase and thus out of bounds access. Fixed above in 2). Test case from Jann. 4) Addition of correlating BPF helper calls, BPF to BPF calls as well as BPF maps to bpftool xlated dump in order to allow for better BPF program introspection and debugging, from Daniel. 5) Fixing several bugs in BPF to BPF calls kallsyms handling in order to get it actually to work for subprogs, from Daniel. 6) Extending sparc64 JIT support for BPF to BPF calls and fix a couple of build errors for libbpf on sparc64, from David. 7) Allow narrower context access for BPF dev cgroup typed programs in order to adapt to LLVM code generation. Also adjust memlock rlimit in the test_dev_cgroup BPF selftest, from Yonghong. 8) Add netdevsim Kconfig entry to BPF selftests since test_offload.py relies on netdevsim device being available, from Jakub. 9) Reduce scope of xdp_do_generic_redirect_map() to being static, from Xiongwei. 10) Minor cleanups and spelling fixes in BPF verifier, from Colin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27sparc64: repair calling incorrect hweight function from stubsJan Engelhardt1-2/+2
Commit v4.12-rc4-1-g9289ea7f952b introduced a mistake that made the 64-bit hweight stub call the 16-bit hweight function. Fixes: 9289ea7f952b ("sparc64: Use indirect calls in hamming weight stubs") Signed-off-by: Jan Engelhardt <jengelh@inai.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-23bpf: sparc64: Add JIT support for multi-function programs.David Miller1-4/+40
Modelled strongly upon the arm64 implementation. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-4/+6
Lots of overlapping changes. Also on the net-next side the XDP state management is handled more in the generic layers so undo the 'net' nfp fix which isn't applicable in net-next. Include a necessary change by Jakub Kicinski, with log message: ==================== cls_bpf no longer takes care of offload tracking. Make sure netdevsim performs necessary checks. This fixes a warning caused by TC trying to remove a filter it has not added. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-2/+4
Pull networking fixes from David Miller" "What's a holiday weekend without some networking bug fixes? [1] 1) Fix some eBPF JIT bugs wrt. SKB pointers across helper function calls, from Daniel Borkmann. 2) Fix regression from errata limiting change to marvell PHY driver, from Zhao Qiang. 3) Fix u16 overflow in SCTP, from Xin Long. 4) Fix potential memory leak during bridge newlink, from Nikolay Aleksandrov. 5) Fix BPF selftest build on s390, from Hendrik Brueckner. 6) Don't append to cfg80211 automatically generated certs file, always write new ones from scratch. From Thierry Reding. 7) Fix sleep in atomic in mac80211 hwsim, from Jia-Ju Bai. 8) Fix hang on tg3 MTU change with certain chips, from Brian King. 9) Add stall detection to arc emac driver and reset chip when this happens, from Alexander Kochetkov. 10) Fix MTU limitng in GRE tunnel drivers, from Xin Long. 11) Fix stmmac timestamping bug due to mis-shifting of field. From Fredrik Hallenberg. 12) Fix metrics match when deleting an ipv4 route. The kernel sets some internal metrics bits which the user isn't going to set when it makes the delete request. From Phil Sutter. 13) mvneta driver loop over RX queues limits on "txq_number" :-) Fix from Yelena Krivosheev. 14) Fix double free and memory corruption in get_net_ns_by_id, from Eric W. Biederman. 15) Flush ipv4 FIB tables in the reverse order. Some tables can share their actual backing data, in particular this happens for the MAIN and LOCAL tables. We have to kill the LOCAL table first, because it uses MAIN's backing memory. Fix from Ido Schimmel. 16) Several eBPF verifier value tracking fixes, from Edward Cree, Jann Horn, and Alexei Starovoitov. 17) Make changes to ipv6 autoflowlabel sysctl really propagate to sockets, unless the socket has set the per-socket value explicitly. From Shaohua Li. 18) Fix leaks and double callback invocations of zerocopy SKBs, from Willem de Bruijn" [1] Is this a trick question? "Relaxing"? "Quiet"? "Fine"? - Linus. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits) skbuff: skb_copy_ubufs must release uarg even without user frags skbuff: orphan frags before zerocopy clone net: reevalulate autoflowlabel setting after sysctl setting openvswitch: Fix pop_vlan action for double tagged frames ipv6: Honor specified parameters in fibmatch lookup bpf: do not allow root to mangle valid pointers selftests/bpf: add tests for recent bugfixes bpf: fix integer overflows bpf: don't prune branches when a scalar is replaced with a pointer bpf: force strict alignment checks for stack pointers bpf: fix missing error return in check_stack_boundary() bpf: fix 32-bit ALU op verification bpf: fix incorrect tracking of register size truncation bpf: fix incorrect sign extension in check_alu_op() bpf/verifier: fix bounds calculation on BPF_RSH ipv4: Fix use-after-free when flushing FIB tables s390/qeth: fix error handling in checksum cmd callback tipc: remove joining group member from congested list selftests: net: Adding config fragment CONFIG_NUMA=y nfp: bpf: keep track of the offloaded program ...
2017-12-19Do not hash userspace addresses in fault handlersKees Cook2-2/+2
The hashing of %p was designed to restrict kernel addresses. There is no reason to hash the userspace values seen during a segfault report, so switch these to %px. (Some architectures already use %lx.) Fixes: ad67b74d2469d9b8 ("printk: hash addresses printed with %p") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-12-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-1/+1
Daniel Borkmann says: ==================== pull-request: bpf-next 2017-12-18 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Allow arbitrary function calls from one BPF function to another BPF function. As of today when writing BPF programs, __always_inline had to be used in the BPF C programs for all functions, unnecessarily causing LLVM to inflate code size. Handle this more naturally with support for BPF to BPF calls such that this __always_inline restriction can be overcome. As a result, it allows for better optimized code and finally enables to introduce core BPF libraries in the future that can be reused out of different projects. x86 and arm64 JIT support was added as well, from Alexei. 2) Add infrastructure for tagging functions as error injectable and allow for BPF to return arbitrary error values when BPF is attached via kprobes on those. This way of injecting errors generically eases testing and debugging without having to recompile or restart the kernel. Tags for opting-in for this facility are added with BPF_ALLOW_ERROR_INJECTION(), from Josef. 3) For BPF offload via nfp JIT, add support for bpf_xdp_adjust_head() helper call for XDP programs. First part of this work adds handling of BPF capabilities included in the firmware, and the later patches add support to the nfp verifier part and JIT as well as some small optimizations, from Jakub. 4) The bpftool now also gets support for basic cgroup BPF operations such as attaching, detaching and listing current BPF programs. As a requirement for the attach part, bpftool can now also load object files through 'bpftool prog load'. This reuses libbpf which we have in the kernel tree as well. bpftool-cgroup man page is added along with it, from Roman. 5) Back then commit e87c6bc3852b ("bpf: permit multiple bpf attachments for a single perf event") added support for attaching multiple BPF programs to a single perf event. Given they are configured through perf's ioctl() interface, the interface has been extended with a PERF_EVENT_IOC_QUERY_BPF command in this work in order to return an array of one or multiple BPF prog ids that are currently attached, from Yonghong. 6) Various minor fixes and cleanups to the bpftool's Makefile as well as a new 'uninstall' and 'doc-uninstall' target for removing bpftool itself or prior installed documentation related to it, from Quentin. 7) Add CONFIG_CGROUP_BPF=y to the BPF kernel selftest config file which is required for the test_dev_cgroup test case to run, from Naresh. 8) Fix reporting of XDP prog_flags for nfp driver, from Jakub. 9) Fix libbpf's exit code from the Makefile when libelf was not found in the system, also from Jakub. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller1-2/+4
Daniel Borkmann says: ==================== pull-request: bpf 2017-12-17 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a corner case in generic XDP where we have non-linear skbs but enough tailroom in the skb to not miss to linearizing there, from Song. 2) Fix BPF JIT bugs in s390x and ppc64 to not recache skb data when BPF context is not skb, from Daniel. 3) Fix a BPF JIT bug in sparc64 where recaching skb data after helper call would use the wrong register for the skb, from Daniel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-17bpf: fix net.core.bpf_jit_enable raceAlexei Starovoitov1-1/+1
global bpf_jit_enable variable is tested multiple times in JITs, blinding and verifier core. The malicious root can try to toggle it while loading the programs. This race condition was accounted for and there should be no issues, but it's safer to avoid this race condition. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15Revert "mm: replace p??_write with pte_access_permitted in fault + gup paths"Linus Torvalds1-2/+2
This reverts commits 5c9d2d5c269c, c7da82b894e9, and e7fe7b5cae90. We'll probably need to revisit this, but basically we should not complicate the get_user_pages_fast() case, and checking the actual page table protection key bits will require more care anyway, since the protection keys depend on the exact state of the VM in question. Particularly when doing a "remote" page lookup (ie in somebody elses VM, not your own), you need to be much more careful than this was. Dave Hansen says: "So, the underlying bug here is that we now a get_user_pages_remote() and then go ahead and do the p*_access_permitted() checks against the current PKRU. This was introduced recently with the addition of the new p??_access_permitted() calls. We have checks in the VMA path for the "remote" gups and we avoid consulting PKRU for them. This got missed in the pkeys selftests because I did a ptrace read, but not a *write*. I also didn't explicitly test it against something where a COW needed to be done" It's also not entirely clear that it makes sense to check the protection key bits at this level at all. But one possible eventual solution is to make the get_user_pages_fast() case just abort if it sees protection key bits set, which makes us fall back to the regular get_user_pages() case, which then has a vma and can do the check there if we want to. We'll see. Somewhat related to this all: what we _do_ want to do some day is to check the PAGE_USER bit - it should obviously always be set for user pages, but it would be a good check to have back. Because we have no generic way to test for it, we lost it as part of moving over from the architecture-specific x86 GUP implementation to the generic one in commit e585513b76f7 ("x86/mm/gup: Switch GUP to the generic get_user_page_fast() implementation"). Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-12-15bpf, sparc: fix usage of wrong reg for load_skb_regs after callDaniel Borkmann1-2/+4
When LD_ABS/IND is used in the program, and we have a BPF helper call that changes packet data (bpf_helper_changes_pkt_data() returns true), then in case of sparc JIT, we try to reload cached skb data from bpf2sparc[BPF_REG_6]. However, there is no such guarantee or assumption that skb sits in R6 at this point, all helpers changing skb data only have a guarantee that skb sits in R1. Therefore, store BPF R1 in L7 temporarily and after procedure call use L7 to reload cached skb data. skb sitting in R6 is only true at the time when LD_ABS/IND is executed. Fixes: 7a12b5031c6b ("sparc64: Add eBPF JIT.") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2017-12-05bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program typeHendrik Brueckner1-0/+1
Commit 0515e5999a466dfe ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type") introduced the bpf_perf_event_data structure which exports the pt_regs structure. This is OK for multiple architectures but fail for s390 and arm64 which do not export pt_regs. Programs using them, for example, the bpf selftest fail to compile on these architectures. For s390, exporting the pt_regs is not an option because s390 wants to allow changes to it. For arm64, there is a user_pt_regs structure that covers parts of the pt_regs structure for use by user space. To solve the broken uapi for s390 and arm64, introduce an abstract type for pt_regs and add an asm/bpf_perf_event.h file that concretes the type. An asm-generic header file covers the architectures that export pt_regs today. The arch-specific enablement for s390 and arm64 follows in separate commits. Reported-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Fixes: 0515e5999a466dfe ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type") Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-04asm-prototypes.h: use linux/uaccess.h, not asm/uaccess.hAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-29Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-3/+3
Mergr misc fixes from Andrew Morton: "28 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (28 commits) fs/hugetlbfs/inode.c: change put_page/unlock_page order in hugetlbfs_fallocate() mm/hugetlb: fix NULL-pointer dereference on 5-level paging machine autofs: revert "autofs: fix AT_NO_AUTOMOUNT not being honored" autofs: revert "autofs: take more care to not update last_used on path walk" fs/fat/inode.c: fix sb_rdonly() change mm, memcg: fix mem_cgroup_swapout() for THPs mm: migrate: fix an incorrect call of prep_transhuge_page() kmemleak: add scheduling point to kmemleak_scan() scripts/bloat-o-meter: don't fail with division by 0 fs/mbcache.c: make count_objects() more robust Revert "mm/page-writeback.c: print a warning if the vm dirtiness settings are illogical" mm/madvise.c: fix madvise() infinite loop under special circumstances exec: avoid RLIMIT_STACK races with prlimit() IB/core: disable memory registration of filesystem-dax vmas v4l2: disable filesystem-dax mapping support mm: fail get_vaddr_frames() for filesystem-dax mappings mm: introduce get_user_pages_longterm device-dax: implement ->split() to catch invalid munmap attempts mm, hugetlbfs: introduce ->split() to vm_operations_struct scripts/faddr2line: extend usage on generic arch ...
2017-11-29mm: replace pmd_write with pmd_access_permitted in fault + gup pathsDan Williams1-1/+1
The 'access_permitted' helper is used in the gup-fast path and goes beyond the simple _PAGE_RW check to also: - validate that the mapping is writable from a protection keys standpoint - validate that the pte has _PAGE_USER set since all fault paths where pmd_write is must be referencing user-memory. Link: http://lkml.kernel.org/r/151043111049.2842.15241454964150083466.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-29mm: replace pud_write with pud_access_permitted in fault + gup pathsDan Williams1-1/+1
The 'access_permitted' helper is used in the gup-fast path and goes beyond the simple _PAGE_RW check to also: - validate that the mapping is writable from a protection keys standpoint - validate that the pte has _PAGE_USER set since all fault paths where pud_write is must be referencing user-memory. [dan.j.williams@intel.com: fix powerpc compile error] Link: http://lkml.kernel.org/r/151129127237.37405.16073414520854722485.stgit@dwillia2-desk3.amr.corp.intel.com Link: http://lkml.kernel.org/r/151043110453.2842.2166049702068628177.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-29mm: switch to 'define pmd_write' instead of __HAVE_ARCH_PMD_WRITEDan Williams1-1/+1
In response to compile breakage introduced by a series that added the pud_write helper to x86, Stephen notes: did you consider using the other paradigm: In arch include files: #define pud_write pud_write static inline int pud_write(pud_t pud) ..... Then in include/asm-generic/pgtable.h: #ifndef pud_write tatic inline int pud_write(pud_t pud) { .... } #endif If you had, then the powerpc code would have worked ... ;-) and many of the other interfaces in include/asm-generic/pgtable.h are protected that way ... Given that some architecture already define pmd_write() as a macro, it's a net reduction to drop the definition of __HAVE_ARCH_PMD_WRITE. Link: http://lkml.kernel.org/r/151129126721.37405.13339850900081557813.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Oliver OHalloran <oliveroh@au1.ibm.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-29make kernel-side POLL... arch-independentAl Viro1-0/+20
mangle/demangle on the way to/from userland Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-29sparc64: Fix boot on T4 and later.David S. Miller1-1/+1
If we don't put the NG4fls.o object into the same part of the link as the generic sparc64 objects for fls() and __fls() then the relocation in the branch we use for patching will not fit. Move NG4fls.o into lib-y to fix this problem. Fixes: 46ad8d2d22c1 ("sparc64: Use sparc optimized fls and __fls for T4 and above") Signed-off-by: David S. Miller <davem@davemloft.net> Reported-by: Anatoly Pugachev <matorola@gmail.com> Tested-by: Anatoly Pugachev <matorola@gmail.com>

Privacy Policy