aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/firewire
AgeCommit message (Collapse)AuthorFilesLines
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds2-4/+4
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-02Merge tag 'firewire-updates' of ↵Linus Torvalds2-2/+13
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire updates from Stefan Richter - make JMicron JMB38x controllers work with IOMMU-equipped systems - IP-over-1394: allow user-configured MTU of up to 4096 bytes * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire-ohci: work around oversized DMA reads on JMicron controllers firewire: net: max MTU off by one
2018-01-13firewire-ohci: work around oversized DMA reads on JMicron controllersHector Martin1-1/+7
At least some JMicron controllers issue buggy oversized DMA reads when fetching context descriptors, always fetching 0x20 bytes at once for descriptors which are only 0x10 bytes long. This is often harmless, but can cause page faults on modern systems with IOMMUs: DMAR: [DMA Read] Request device [05:00.0] fault addr fff56000 [fault reason 06] PTE Read access is not set firewire_ohci 0000:05:00.0: DMA context IT0 has stopped, error code: evt_descriptor_read This works around the problem by always leaving 0x10 padding bytes at the end of descriptor buffer pages, which should be harmless to do unconditionally for controllers in case others have the same behavior. Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2018-01-13firewire: net: max MTU off by oneStefan Richter1-1/+6
The latest max_mtu patch missed that datagram_size is actually one less than the datagram's Total Length. Fixes: 357f4aae859b ("firewire: net: really fix maximum possible MTU") Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2017-11-28the rest of drivers/*: annotate ->poll() instancesAl Viro2-4/+4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-13Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...
2017-11-07Merge branch 'linus' into locking/core, to resolve conflictsIngo Molnar5-0/+5
Conflicts: include/linux/compiler-clang.h include/linux/compiler-gcc.h include/linux/compiler-intel.h include/uapi/linux/stddef.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman5-0/+5
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland1-6/+4
to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-05timer: Remove init_timer_on_stack() in favor of timer_setup_on_stack()Kees Cook1-5/+5
Remove uses of init_timer_on_stack() with open-coded function and data assignments that could be expressed using timer_setup_on_stack(). Several were removed from the stack entirely since there was a one-to-one mapping of parent structure to timer, those are switched to using timer_setup() instead. All related callbacks were adjusted to use from_timer(). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: Petr Mladek <pmladek@suse.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: linux1394-devel@lists.sourceforge.net Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: linux-s390@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: linux-scsi@vger.kernel.org Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Ursula Braun <ubraun@linux.vnet.ibm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Harish Patil <harish.patil@cavium.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Reed <mdr@sgi.com> Cc: Manish Chopra <manish.chopra@cavium.com> Cc: Len Brown <len.brown@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-pm@vger.kernel.org Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Julian Wiedmann <jwi@linux.vnet.ibm.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Mark Gross <mark.gross@intel.com> Cc: linux-watchdog@vger.kernel.org Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: netdev@vger.kernel.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lkml.kernel.org/r/1507159627-127660-4-git-send-email-keescook@chromium.org
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg1-5/+3
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg1-1/+1
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-23drivers, firewire: convert fw_node.ref_count from atomic_t to refcount_tElena Reshetova2-5/+5
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-28Merge branch 'idr-4.11' of git://git.infradead.org/users/willy/linux-daxLinus Torvalds1-2/+1
Pull IDR rewrite from Matthew Wilcox: "The most significant part of the following is the patch to rewrite the IDR & IDA to be clients of the radix tree. But there's much more, including an enhancement of the IDA to be significantly more space efficient, an IDR & IDA test suite, some improvements to the IDR API (and driver changes to take advantage of those improvements), several improvements to the radix tree test suite and RCU annotations. The IDR & IDA rewrite had a good spin in linux-next and Andrew's tree for most of the last cycle. Coupled with the IDR test suite, I feel pretty confident that any remaining bugs are quite hard to hit. 0-day did a great job of watching my git tree and pointing out problems; as it hit them, I added new test-cases to be sure not to be caught the same way twice" Willy goes on to expand a bit on the IDR rewrite rationale: "The radix tree and the IDR use very similar data structures. Merging the two codebases lets us share the memory allocation pools, and results in a net deletion of 500 lines of code. It also opens up the possibility of exposing more of the features of the radix tree to users of the IDR (and I have some interesting patches along those lines waiting for 4.12) It also shrinks the size of the 'struct idr' from 40 bytes to 24 which will shrink a fair few data structures that embed an IDR" * 'idr-4.11' of git://git.infradead.org/users/willy/linux-dax: (32 commits) radix tree test suite: Add config option for map shift idr: Add missing __rcu annotations radix-tree: Fix __rcu annotations radix-tree: Add rcu_dereference and rcu_assign_pointer calls radix tree test suite: Run iteration tests for longer radix tree test suite: Fix split/join memory leaks radix tree test suite: Fix leaks in regression2.c radix tree test suite: Fix leaky tests radix tree test suite: Enable address sanitizer radix_tree_iter_resume: Fix out of bounds error radix-tree: Store a pointer to the root in each node radix-tree: Chain preallocated nodes through ->parent radix tree test suite: Dial down verbosity with -v radix tree test suite: Introduce kmalloc_verbose idr: Return the deleted entry from idr_remove radix tree test suite: Build separate binaries for some tests ida: Use exceptional entries for small IDAs ida: Move ida_bitmap to a percpu variable Reimplement IDR and IDA using the radix tree radix-tree: Add radix_tree_iter_delete ...
2017-02-27scripts/spelling.txt: add "intialization" pattern and fix typo instancesMasahiro Yamada1-2/+2
Fix typos and add the following to the scripts/spelling.txt: intialization||initialization The "inintialization" in drivers/acpi/spcr.c is a different pattern but I fixed it as well in this commit. Link: http://lkml.kernel.org/r/1481573103-11329-16-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-13idr: Return the deleted entry from idr_removeMatthew Wilcox1-2/+1
It is a relatively common idiom (8 instances) to first look up an IDR entry, and then remove it from the tree if it is found, possibly doing further operations upon the entry afterwards. If we change idr_remove() to return the removed object, all of these users can save themselves a walk of the IDR tree. Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
2016-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-20/+39
Several cases of bug fixes in 'net' overlapping other changes in 'net-next-. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-03firewire: net: fix fragmented datagram_size off-by-oneStefan Richter1-4/+4
RFC 2734 defines the datagram_size field in fragment encapsulation headers thus: datagram_size: The encoded size of the entire IP datagram. The value of datagram_size [...] SHALL be one less than the value of Total Length in the datagram's IP header (see STD 5, RFC 791). Accordingly, the eth1394 driver of Linux 2.6.36 and older set and got this field with a -/+1 offset: ether1394_tx() /* transmit */ ether1394_encapsulate_prep() hdr->ff.dg_size = dg_size - 1; ether1394_data_handler() /* receive */ if (hdr->common.lf == ETH1394_HDR_LF_FF) dg_size = hdr->ff.dg_size + 1; else dg_size = hdr->sf.dg_size + 1; Likewise, I observe OS X 10.4 and Windows XP Pro SP3 to transmit 1500 byte sized datagrams in fragments with datagram_size=1499 if link fragmentation is required. Only firewire-net sets and gets datagram_size without this offset. The result is lacking interoperability of firewire-net with OS X, Windows XP, and presumably Linux' eth1394. (I did not test with the latter.) For example, FTP data transfers to a Linux firewire-net box with max_rec smaller than the 1500 bytes MTU - from OS X fail entirely, - from Win XP start out with a bunch of fragmented datagrams which time out, then continue with unfragmented datagrams because Win XP temporarily reduces the MTU to 576 bytes. So let's fix firewire-net's datagram_size accessors. Note that firewire-net thereby loses interoperability with unpatched firewire-net, but only if link fragmentation is employed. (This happens with large broadcast datagrams, and with large datagrams on several FireWire CardBus cards with smaller max_rec than equivalent PCI cards, and it can be worked around by setting a small enough MTU.) Cc: stable@vger.kernel.org Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2016-11-03firewire: net: guard against rx buffer overflowsStefan Richter1-16/+35
The IP-over-1394 driver firewire-net lacked input validation when handling incoming fragmented datagrams. A maliciously formed fragment with a respectively large datagram_offset would cause a memcpy past the datagram buffer. So, drop any packets carrying a fragment with offset + length larger than datagram_size. In addition, ensure that - GASP header, unfragmented encapsulation header, or fragment encapsulation header actually exists before we access it, - the encapsulated datagram or fragment is of nonzero size. Reported-by: Eyal Itkin <eyal.itkin@gmail.com> Reviewed-by: Eyal Itkin <eyal.itkin@gmail.com> Fixes: CVE 2016-8633 Cc: stable@vger.kernel.org Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2016-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+10
Mostly simple overlapping changes. For example, David Ahern's adjacency list revamp in 'net-next' conflicted with an adjacency list traversal bug fix in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29firewire: net: really fix maximum possible MTUStefan Richter1-1/+1
The maximum unicast datagram size /without/ link fragmentation is 4096 - 4 = 4092 (max IEEE 1394 async payload size at >= S800 bus speed, minus unfragmented encapssulation header). Max broadcast datagram size without fragmentation is 8 bytes less than that (due to GASP header). The maximum datagram size /with/ link fragmentation is 0xfff = 4095 for unicast and broadcast. This is because the RFC 2734 fragment encapsulation header field for datagram size is only 12 bits wide. Fixes: 5d48f00d836a('firewire: net: fix maximum possible MTU') Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26firewire: net: set initial MTU = 1500 unconditionally, fix IPv6 on some ↵Stefan Richter1-7/+1
CardBus cards firewire-net, like the older eth1394 driver, reduced the initial MTU to less than 1500 octets if the local link layer controller's asynchronous packet reception limit was lower. This is bogus, since this reception limit does not have anything to do with the transmission limit. Neither did this reduction affect the TX path positively, nor could it prevent link fragmentation at the RX path. Many FireWire CardBus cards have a max_rec of 9, causing an initial MTU of 1024 - 16 = 1008. RFC 2734 and RFC 3146 allow a minimum max_rec = 8, which would result in an initial MTU of 512 - 16 = 496. On such cards, IPv6 could only be employed if the MTU was manually increased to 1280 or more, i.e. IPv6 would not work without intervention from userland. We now always initialize the MTU to 1500, which is the default according to RFC 2734 and RFC 3146. On a VIA VT6316 based CardBus card which was affected by this, changing the MTU from 1008 to 1500 also increases TX bandwidth by 6 %. RX remains unaffected. CC: netdev@vger.kernel.org CC: linux1394-devel@lists.sourceforge.net CC: Jarod Wilson <jarod@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26firewire: net: fix maximum possible MTUStefan Richter1-3/+4
Commit b3e3893e1253 ("net: use core MTU range checking in misc drivers") mistakenly introduced an upper limit for firewire-net's MTU based on the local link layer controller's reception capability. Revert this. Neither RFC 2734 nor our implementation impose any particular upper limit. Actually, to be on the safe side and to make the code explicit, set ETH_MAX_MTU = 65535 as upper limit now. (I replaced sizeof(struct rfc2734_header) by the equivalent RFC2374_FRAG_HDR_SIZE in order to avoid distracting long/int conversions.) Fixes: b3e3893e1253('net: use core MTU range checking in misc drivers') CC: netdev@vger.kernel.org CC: linux1394-devel@lists.sourceforge.net CC: Jarod Wilson <jarod@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: use core MTU range checking in misc driversJarod Wilson1-14/+4
firewire-net: - set min/max_mtu - remove fwnet_change_mtu nes: - set max_mtu - clean up nes_netdev_change_mtu xpnet: - set min/max_mtu - remove xpnet_dev_change_mtu hippi: - set min/max_mtu - remove hippi_change_mtu batman-adv: - set max_mtu - remove batadv_interface_change_mtu - initialization is a little async, not 100% certain that max_mtu is set in the optimal place, don't have hardware to test with rionet: - set min/max_mtu - remove rionet_change_mtu slip: - set min/max_mtu - streamline sl_change_mtu um/net_kern: - remove pointless ndo_change_mtu hsi/clients/ssi_protocol: - use core MTU range checking - remove now redundant ssip_pn_set_mtu ipoib: - set a default max MTU value - Note: ipoib's actual max MTU can vary, depending on if the device is in connected mode or not, so we'll just set the max_mtu value to the max possible, and let the ndo_change_mtu function continue to validate any new MTU change requests with checks for CM or not. Note that ipoib has no min_mtu set, and thus, the network core's mtu > 0 check is the only lower bounds here. mptlan: - use net core MTU range checking - remove now redundant mpt_lan_change_mtu fddi: - min_mtu = 21, max_mtu = 4470 - remove now redundant fddi_change_mtu (including export) fjes: - min_mtu = 8192, max_mtu = 65536 - The max_mtu value is actually one over IP_MAX_MTU here, but the idea is to get past the core net MTU range checks so fjes_change_mtu can validate a new MTU against what it supports (see fjes_support_mtu in fjes_hw.c) hsr: - min_mtu = 0 (calls ether_setup, max_mtu is 1500) f_phonet: - min_mtu = 6, max_mtu = 65541 u_ether: - min_mtu = 14, max_mtu = 15412 phonet/pep-gprs: - min_mtu = 576, max_mtu = 65530 - remove redundant gprs_set_mtu CC: netdev@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: Stefan Richter <stefanr@s5r6.in-berlin.de> CC: Faisal Latif <faisal.latif@intel.com> CC: linux-rdma@vger.kernel.org CC: Cliff Whickman <cpw@sgi.com> CC: Robin Holt <robinmholt@gmail.com> CC: Jes Sorensen <jes@trained-monkey.org> CC: Marek Lindner <mareklindner@neomailbox.ch> CC: Simon Wunderlich <sw@simonwunderlich.de> CC: Antonio Quartulli <a@unstable.cc> CC: Sathya Prakash <sathya.prakash@broadcom.com> CC: Chaitra P B <chaitra.basappa@broadcom.com> CC: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> CC: MPT-FusionLinux.pdl@broadcom.com CC: Sebastian Reichel <sre@kernel.org> CC: Felipe Balbi <balbi@kernel.org> CC: Arvid Brodin <arvid.brodin@alten.se> CC: Remi Denis-Courmont <courmisch@gmail.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-09firewire: nosy: do not ignore errors in ioremap_nocache()Alexey Khoroshilov1-3/+10
There is no check if ioremap_nocache() returns a valid pointer. Potentially it can lead to null pointer dereference. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (renamed goto labels)
2016-05-04treewide: replace dev->trans_start update with helperFlorian Westphal1-1/+1
Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-25Merge tag 'firewire-update2' of ↵Linus Torvalds1-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire leftover from Stefan Richter: "Occurrences of timeval were supposed to be eliminated last round, now remove a last forgotten one" * tag 'firewire-update2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: nosy: Replace timeval with timespec64
2016-03-22firewire: use in_compat_syscall to check ioctl compatnessAndy Lutomirski1-2/+2
Firewire was using is_compat_task to check whether it was in a compat ioctl or a non-compat ioctl. Use is_compat_syscall instead so it works properly on all architectures. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22firewire: nosy: Replace timeval with timespec64Tina Ruchandani1-3/+5
'struct timeval' uses a 32 bit field for its 'seconds' value which will overflow in year 2038 and beyond. This patch replaces the use of timeval in nosy.c with timespec64 which doesn't suffer from y2038 issue. The code is correct as is - since it is only using the microseconds portion of timeval. However, this patch does the replacement as part of a larger effort to remove all instances of 'struct timeval' from the kernel (that would help identify cases where the code is actually broken). Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2016-03-19Merge tag 'firewire-updates' of ↵Linus Torvalds2-6/+9
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire updates from Stefan Richter: "IEEE 1394 subsystem patches: - move away from outmoded timekeeping API - error reporting fix - documentation bits" * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: ABI documentation: libhinawa uses firewire-cdev firewire: ABI documentation: jujuutils were renamed to linux-firewire-utils firewire: ohci: propagate return code from soft_reset to probe and resume firewire: nosy: Replace timeval with timespec64
2015-11-11Merge tag 'firewire-update' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fix from Stefan Richter: "Work around JMicron initialization quirk, which ffected isochronous transmission, e.g. audio via FFADO or ALSA" * tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: ohci: fix JMicron JMB38x IT context discovery
2015-11-06mm, page_alloc: distinguish between being unable to sleep, unwilling to ↵Mel Gorman1-1/+1
sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05firewire: ohci: propagate return code from soft_reset to probe and resumeStefan Richter1-2/+3
software_reset() may fail - due to unresponsive chip with -EBUSY (-16), or - due to ejected or unseated card with -ENODEV (-19). Let the PCI probe and resume routines log the actual error code instead of hardwired -EBUSY. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2015-11-05firewire: nosy: Replace timeval with timespec64Amitoj Kaur Chawla1-4/+6
32 bit systems using 'struct timeval' will break in the year 2038, so we replace the code appropriately. However, this driver is not broken in 2038 since we are using only the microseconds portion of the current time. This patch replaces timeval with timespec64. Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2015-11-05firewire: ohci: fix JMicron JMB38x IT context discoveryStefan Richter1-0/+5
Reported by Clifford and Craig for JMicron OHCI-1394 + SDHCI combo controllers: Often or even most of the time, the controller is initialized with the message "added OHCI v1.10 device as card 0, 4 IR + 0 IT contexts, quirks 0x10". With 0 isochronous transmit DMA contexts (IT contexts), applications like audio output are impossible. However, OHCI-1394 demands that at least 4 IT contexts are implemented by the link layer controller, and indeed JMicron JMB38x do implement four of them. Only their IsoXmitIntMask register is unreliable at early access. With my own JMB381 single function controller I found: - I can reproduce the problem with a lower probability than Craig's. - If I put a loop around the section which clears and reads IsoXmitIntMask, then either the first or the second attempt will return the correct initial mask of 0x0000000f. I never encountered a case of needing more than a second attempt. - Consequently, if I put a dummy reg_read(...IsoXmitIntMaskSet) before the first write, the subsequent read will return the correct result. - If I merely ignore a wrong read result and force the known real result, later isochronous transmit DMA usage works just fine. So let's just fix this chip bug up by the latter method. Tested with JMB381 on kernel 3.13 and 4.3. Since OHCI-1394 generally requires 4 IT contexts at a minium, this workaround is simply applied whenever the initial read of IsoXmitIntMask returns 0, regardless whether it's a JMicron chip or not. I never heard of this issue together with any other chip though. I am not 100% sure that this fix works on the OHCI-1394 part of JMB380 and JMB388 combo controllers exactly the same as on the JMB381 single- function controller, but so far I haven't had a chance to let an owner of a combo chip run a patched kernel. Strangely enough, IsoRecvIntMask is always reported correctly, even though it is probed right before IsoXmitIntMask. Reported-by: Clifford Dunn Reported-by: Craig Moore <craig.moore@qenos.com> Cc: stable@vger.kernel.org Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2015-05-31scsi: Do not set cmd_per_lun to 1 in the host templateHannes Reinecke1-1/+0
'0' is now used as the default cmd_per_lun value, so there's no need to explicitly set it to '1' in the host template. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-18/+2
Conflicts: drivers/net/ethernet/rocker/rocker.c The rocker commit was two overlapping changes, one to rename the ->vport member to ->pport, and another making the bitmask expression use '1ULL' instead of plain '1'. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02net: Kill dev_rebuild_headerEric W. Biederman1-13/+0
Now that there are no more users kill dev_rebuild_header and all of it's implementations. This is long overdue. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02firewire: core: use correct vendor/model IDsClemens Ladisch1-2/+2
The kernel was using the vendor ID 0xd00d1e, which was inherited from the old ieee1394 driver stack. However, this ID was not registered, and invalid. Instead, use the vendor/model IDs that are now officially assigned to the kernel: https://ieee1394.wiki.kernel.org/index.php/IEEE_OUI_Assignments [stefanr: - The vendor ID 001f11 is Openmoko, Inc.'s identifier, registered at IEEE Registration Authority. - The range of model IDs 023900...0239ff are the Linux kernel 1394 subsystem's identifiers, registered at Openmoko. - Model ID 023901 is picked by the subsystem developers as firewire-core's model ID.] Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2015-01-31firewire: sbp2: remove redundant check for bidi commandStefan Richter1-11/+0
[Bart van Asche:] SCSI core never sets cmd->sc_data_direction to DMA_BIDIRECTIONAL; scsi_bidi_cmnd(cmd) should be used instead to test for a bidirectional command. [Christoph Hellwig:] Bidirectional commands won't ever be queued anyway, unless a LLD or transport driver sets QUEUE_FLAG_BIDI. So, simply remove the respective queuecommand check in the SBP-2 transport driver. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2015-01-22firewire: ohci: Remove unused functionRickard Strandqvist1-5/+0
Remove the function ar_prev_buffer_index() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-12-10firewire: sbp2: replace card lock by target lockStefan Richter1-31/+29
firewire-core uses fw_card.lock to protect topology data and transaction data. firewire-sbp2 uses fw_card.lock for entirely unrelated purposes. Introduce a sbp2_target.lock to firewire-sbp2 and replace all fw_card.lock uses in the driver. fw_card.lock is now entirely private to firewire-core. This has no immediate advantage apart from making it clear in the code that firewire-sbp2 does not interact with the core via the core lock. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-12-10firewire: sbp2: replace some spin_lock_irqsave by spin_lock_irqStefan Richter1-9/+6
Users of card->lock Calling context ------------------------------------------------------------------------ sbp2_status_write AR-req handler, tasklet complete_transaction AR-resp or AT-req handler, tasklet sbp2_send_orb among else scsi host .queuecommand, which may be called in some sort of atomic context sbp2_cancel_orbs sbp2_send_management_orb/ sbp2_{login,reconnect,remove}, worklet or process sbp2_scsi_abort, scsi eh thread sbp2_allow_block sbp2_login, worklet sbp2_conditionally_block among else complete_command_orb, tasklet sbp2_conditionally_unblock sbp2_{login,reconnect}, worklet sbp2_unblock sbp2_{login,remove}, worklet or process Drop the IRQ flags saving from sbp2_cancel_orbs, sbp2_conditionally_unblock, and sbp2_unblock. It was already omitted in sbp2_allow_block. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-12-10firewire: sbp2: protect a reference counter properlyStefan Richter1-8/+6
The assertion in the comment in sbp2_allow_block() is no longer true. Or maybe it never was true. At least now, the sole caller of sbp2_allow_block(), sbp2_login, can run concurrently to one of sbp2_unblock()'s callers, sbp2_remove. sbp2_login is performed by sbp2_logical_unit.work. sbp2_remove is performed by fw_device.work. sbp2_remove cancels sbp2_logical_unit.work, but only after it called sbp2_unblock. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-12-10firewire: core: document fw_csr_string's truncation of long stringsStefan Richter1-0/+3
fw_csr_string() truncates and terminates target strings like strlcpy() does. Unlike strlcpy(), it returns the target strlen, not the source strlen, hence users of fw_csr_string() are unable to detect truncation. Point this behavior out in the kerneldoc comment. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
2014-11-19firewire: ohci: replace vm_map_ram() with vmap()Clemens Ladisch1-4/+2
vm_map_ram() is intended for short-lived objects, so using it for the AR buffers could fragment address space, especially on a 32-bit machine. For an allocation that lives as long as the device, vmap() is the better choice. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-11-14firewire: cdev: prevent kernel stack leaking into ioctl argumentsStefan Richter1-2/+1
Found by the UC-KLEE tool: A user could supply less input to firewire-cdev ioctls than write- or write/read-type ioctl handlers expect. The handlers used data from uninitialized kernel stack then. This could partially leak back to the user if the kernel subsequently generated fw_cdev_event_'s (to be read from the firewire-cdev fd) which notably would contain the _u64 closure field which many of the ioctl argument structures contain. The fact that the handlers would act on random garbage input is a lesser issue since all handlers must check their input anyway. The fix simply always null-initializes the entire ioctl argument buffer regardless of the actual length of expected user input. That is, a runtime overhead of memset(..., 40) is added to each firewirew-cdev ioctl() call. [Comment from Clemens Ladisch: This part of the stack is most likely to be already in the cache.] Remarks: - There was never any leak from kernel stack to the ioctl output buffer itself. IOW, it was not possible to read kernel stack by a read-type or write/read-type ioctl alone; the leak could at most happen in combination with read()ing subsequent event data. - The actual expected minimum user input of each ioctl from include/uapi/linux/firewire-cdev.h is, in bytes: [0x00] = 32, [0x05] = 4, [0x0a] = 16, [0x0f] = 20, [0x14] = 16, [0x01] = 36, [0x06] = 20, [0x0b] = 4, [0x10] = 20, [0x15] = 20, [0x02] = 20, [0x07] = 4, [0x0c] = 0, [0x11] = 0, [0x16] = 8, [0x03] = 4, [0x08] = 24, [0x0d] = 20, [0x12] = 36, [0x17] = 12, [0x04] = 20, [0x09] = 24, [0x0e] = 4, [0x13] = 40, [0x18] = 4. Reported-by: David Ramos <daramos@stanford.edu> Cc: <stable@vger.kernel.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-1/+2
Pull networking updates from David Miller: "Highlights: 1) Steady transitioning of the BPF instructure to a generic spot so all kernel subsystems can make use of it, from Alexei Starovoitov. 2) SFC driver supports busy polling, from Alexandre Rames. 3) Take advantage of hash table in UDP multicast delivery, from David Held. 4) Lighten locking, in particular by getting rid of the LRU lists, in inet frag handling. From Florian Westphal. 5) Add support for various RFC6458 control messages in SCTP, from Geir Ola Vaagland. 6) Allow to filter bridge forwarding database dumps by device, from Jamal Hadi Salim. 7) virtio-net also now supports busy polling, from Jason Wang. 8) Some low level optimization tweaks in pktgen from Jesper Dangaard Brouer. 9) Add support for ipv6 address generation modes, so that userland can have some input into the process. From Jiri Pirko. 10) Consolidate common TCP connection request code in ipv4 and ipv6, from Octavian Purdila. 11) New ARP packet logger in netfilter, from Pablo Neira Ayuso. 12) Generic resizable RCU hash table, with intial users in netlink and nftables. From Thomas Graf. 13) Maintain a name assignment type so that userspace can see where a network device name came from (enumerated by kernel, assigned explicitly by userspace, etc.) From Tom Gundersen. 14) Automatic flow label generation on transmit in ipv6, from Tom Herbert. 15) New packet timestamping facilities from Willem de Bruijn, meant to assist in measuring latencies going into/out-of the packet scheduler, latency from TCP data transmission to ACK, etc" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits) cxgb4 : Disable recursive mailbox commands when enabling vi net: reduce USB network driver config options. tg3: Modify tg3_tso_bug() to handle multiple TX rings amd-xgbe: Perform phy connect/disconnect at dev open/stop amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask net: sun4i-emac: fix memory leak on bad packet sctp: fix possible seqlock seadlock in sctp_packet_transmit() Revert "net: phy: Set the driver when registering an MDIO bus device" cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine team: Simplify return path of team_newlink bridge: Update outdated comment on promiscuous mode net-timestamp: ACK timestamp for bytestreams net-timestamp: TCP timestamping net-timestamp: SCHED timestamp on entering packet scheduler net-timestamp: add key to disambiguate concurrent datagrams net-timestamp: move timestamp flags out of sk_flags net-timestamp: extend SCM_TIMESTAMPING ancillary data struct cxgb4i : Move stray CPL definitions to cxgb4 driver tcp: reduce spurious retransmits due to transient SACK reneging qlcnic: Initialize dcbnl_ops before register_netdev ...
2014-08-05Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer and time updates from Thomas Gleixner: "A rather large update of timers, timekeeping & co - Core timekeeping code is year-2038 safe now for 32bit machines. Now we just need to fix all in kernel users and the gazillion of user space interfaces which rely on timespec/timeval :) - Better cache layout for the timekeeping internal data structures. - Proper nanosecond based interfaces for in kernel users. - Tree wide cleanup of code which wants nanoseconds but does hoops and loops to convert back and forth from timespecs. Some of it definitely belongs into the ugly code museum. - Consolidation of the timekeeping interface zoo. - A fast NMI safe accessor to clock monotonic for tracing. This is a long standing request to support correlated user/kernel space traces. With proper NTP frequency correction it's also suitable for correlation of traces accross separate machines. - Checkpoint/restart support for timerfd. - A few NOHZ[_FULL] improvements in the [hr]timer code. - Code move from kernel to kernel/time of all time* related code. - New clocksource/event drivers from the ARM universe. I'm really impressed that despite an architected timer in the newer chips SoC manufacturers insist on inventing new and differently broken SoC specific timers. [ Ed. "Impressed"? I don't think that word means what you think it means ] - Another round of code move from arch to drivers. Looks like most of the legacy mess in ARM regarding timers is sorted out except for a few obnoxious strongholds. - The usual updates and fixlets all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits) timekeeping: Fixup typo in update_vsyscall_old definition clocksource: document some basic timekeeping concepts timekeeping: Use cached ntp_tick_length when accumulating error timekeeping: Rework frequency adjustments to work better w/ nohz timekeeping: Minor fixup for timespec64->timespec assignment ftrace: Provide trace clocks monotonic timekeeping: Provide fast and NMI safe access to CLOCK_MONOTONIC seqcount: Add raw_write_seqcount_latch() seqcount: Provide raw_read_seqcount() timekeeping: Use tk_read_base as argument for timekeeping_get_ns() timekeeping: Create struct tk_read_base and use it in struct timekeeper timekeeping: Restructure the timekeeper some more clocksource: Get rid of cycle_last clocksource: Move cycle_last validation to core code clocksource: Make delta calculation a function wireless: ath9k: Get rid of timespec conversions drm: vmwgfx: Use nsec based interfaces drm: i915: Use nsec based interfaces timekeeping: Provide ktime_get_raw() hangcheck-timer: Use ktime_get_ns() ...
2014-07-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
Signed-off-by: David S. Miller <davem@davemloft.net>

Privacy Policy