path: root/drivers/input/joydev.c
AgeCommit message (Collapse)AuthorFilesLines
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-2/+2
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-28the rest of drivers/*: annotate ->poll() instancesAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-10-19Input: joydev - blacklist ds3/ds4/udraw motion sensorsRoderick Colenbrander1-6/+64
Introduce a device table used for blacklisting devices. We currently blacklist the motion sensor subdevice of THQ Udraw and Sony ds3/ds4. Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> [dtor: siwtched to blacklist built on input_device_id and using input_match_device_id()] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-21input: utilize new cdev_device_add helper functionLogan Gunthorpe1-9/+2
Replace the open coded registration of the cdev and dev with the new device_add_cdev() helper in evdev, joydev and mousedev. The helper replaces a common pattern by taking the proper reference against the parent device and adding both the cdev and the device. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-09Input: joydev - do not report stale values on first openRaphael Assenat1-5/+13
Postpone axis initialization to the first open instead of doing it in joydev_connect. This is to make sure the generated startup events are representative of the current joystick state rather than what it was when joydev_connect() was called, potentially much earlier. Once the first user is connected to joydev node we'll be updating joydev->abs[] values and subsequent clients will be getting correct initial states as well. This solves issues with joystick driven menus that start scrolling up each time they are started, until the user moves the joystick to generate events. In emulator menu setups where the menu program is restarted every time the game exits, the repeated need to move the joystick to stop the unintended scrolling gets old rather quickly... Signed-off-by: Raphael Assenat <raph@raphnet.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-01Input: joydev - use clamp() macroDmitry Torokhov1-1/+1
We have a nice macro ensuring that the value is within certain range, let's use it instead of open-coding. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-18Input: joydev - remove unused linux/miscdevice.h includeCorentin Labbe1-1/+0
This patch remove the inclusion of linux/miscdevice.h for joydev since it does not use miscdevice. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-26Input: joydev - recognize devices with Z axis as joysticksVille Ranki1-0/+6
Current implementation of joydev's input_device_id table recognizes only devices with ABS_X, ABS_WHEEL or ABS_THROTTLE axes as joysticks. There are joystick devices that do not have those axes, for example TRC Rudder device. The device in question has ABS_Z, ABS_RX and ABS_RY axes causing it not being detected as joystick. This patch adds ABS_Z to the input_device_id list allowing devices with ABS_Z axis to be detected correctly. Signed-off-by: Ville Ranki <ville.ranki@iki.fi> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-06Input: joydev - fix possible ERR_PTR() dereferencingJavier Martinez Canillas1-8/+4
Commit 5702222c9a7a ("Input: joydev - use memdup_user() to duplicate memory from user-space") changed the kmalloc() and copy_from_user() with a single call to memdup_user() but wrongly used the same error path than the old code in which the buffer allocated by kmalloc() was freed if copy_from_user() failed. This is of course wrong since if memdup_user() fails, no memory was allocated and the error in the error-valued pointer should be returned. Fixes: 5702222c9a7a ("Input: joydev - use memdup_user() to duplicate memory from user-space") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-02Input: joydev - use memdup_user() to duplicate memory from user-spaceJavier Martinez Canillas1-12/+6
The memdup_user() helper function can be used to duplicate a memory region from user-space to kernel-space. There is no need to open code the same logic using kmalloc() and copy_from_user() instead. This was found with make coccicheck that reported the following warning: drivers/input/joydev.c:447:10-17: WARNING opportunity for memdup_user drivers/input/joydev.c:483:10-17: WARNING opportunity for memdup_user Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-20Merge tag 'v4.2-rc3' into nextDmitry Torokhov1-0/+61
Sync up with Linux 4.2-rc3 to bring in infrastructure (OF) pieces.
2015-07-08Input: joydev - use for_each_set_bit where appropriateAnshul Garg1-6/+5
Use for_each_set_bit to check for set bits in bitmap as it is more efficient than checking individual bits. Signed-off-by: Anshul Garg <aksgarg1989@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-21Input: joydev - don't classify the vmmouse as a joystickThomas Hellstrom1-0/+61
Joydev is currently thinking some absolute mice are joystick, and that messes up games in VMware guests, as the cursor typically gets stuck in the top left corner. Try to detect the event signature of a VMmouse input device and back off for such devices. We're still incorrectly detecting, for example, the VMware absolute USB mouse as a joystick, but adding an event signature matching also that device would be considerably more risky, so defer that to a later merge window. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-22Input: fix use-after-free introduced with dynamic minor changesDmitry Torokhov1-2/+1
Commit 7f8d4cad1e4e ("Input: extend the number of event (and other) devices") made evdev, joydev and mousedev to embed struct cdev into their respective structures representing input devices. Unfortunately character device structure may outlive the parent structure unless we do not set it up as parent of character device so that it will stay pinned until character device is freed. Also, now that parent structure is pinned while character device exists we do not need to pin and unpin it every time user opens or closes it. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08Input: extend the number of event (and other) devicesDmitry Torokhov1-56/+32
Extend the amount of character devices, such as eventX, mouseX and jsX, from a hard limit of 32 per input handler to about 1024 shared across all handlers. To be compatible with legacy installations input handlers will start creating char devices with minors in their legacy range, however once legacy range is exhausted they will start allocating minors from the dynamic range 256-1024. Reviewed-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-08-21Input: random formatting fixesBaodong Chen1-1/+1
Fixes for some coding style issues reported by scripts/checkpatch.pl utility. Signed-off-by: Baodong Chen <chenbdchenbd@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-03-28Remove all #inclusions of asm/system.hDavid Howells1-1/+0
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2011-05-12Input: remove useless synchronize_rcu() callsEric Dumazet1-1/+0
There is no need to call synchronize_rcu() after a list insertion, or a NULL->ptr assignment. However, the reverse operations do need this call. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-31Fix common misspellingsLucas De Marchi1-2/+2
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2010-11-30Input: use pr_fmt and pr_<level>Joe Perches1-1/+3
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-22Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds1-0/+1
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
2010-10-15llseek: automatically add .llseek fopArnd Bergmann1-0/+1
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-09-21Input: joydev - fix JSIOCSAXMAP ioctlKenneth Waters1-0/+3
Fixed JSIOCSAXMAP ioctl to update absmap, the map from hardware axis to event axis in addition to abspam. This fixes a regression introduced by 999b874f. Signed-off-by: Kenneth Waters <kwwaters@gmail.com> Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-02Input: switch to input_abs_*() access functionsDaniel Mack1-15/+16
Change all call sites in drivers/input to not access the ABS axis information directly anymore. Make them use the access helpers instead. Also use input_set_abs_params() when possible. Did some code refactoring as I was on it. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-15Input: change input handlers to use bool when possibleDmitry Torokhov1-4/+3
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-20Input: use ABS_CNT rather than (ABS_MAX + 1)Daniel Mack1-5/+5
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-03Input: joydev - allow binding to button-only devicesChristoph Fritz1-0/+18
Dance pads don't have an axis, so allow this kind of controllers to be used via legacy joystick interface. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-04Input: mark input interfaces as non-seekableDmitry Torokhov1-0/+2
Seeking does not make sense for input interfaces such as evdev and joydev so let's use nonseekable_open to mark them non-seekable. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-04Input: add match() method to input hanldersDmitry Torokhov1-17/+15
Get rid of blacklist in input handler structure and instead allow handlers to define their own match() method to perform fine-grained filtering of supported devices. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-10-04headers: remove sched.h from poll.hAlexey Dobriyan1-0/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-27Input: joydev - validate axis/button maps before clobbering current onesStephen Kitt1-32/+74
Up to now axis and button map validation was done after the user-supplied values were copied over the driver's map. This patch copies the user-supplied values into temporary buffers and validated them before overwriting the driver's permanent maps. Also change JSIOCGBTNMAP and JSIOCGAXMAP to return number of bytes returned to userspace instead of 0. Signed-off-by: Stephen Kitt <steve@sk2.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-12Input: joydev - decouple axis and button map ioctls from input constantsStephen Kitt1-27/+41
The KEY_MAX change in 2.6.28 changed the values of the JSIOCSBTNMAP and JSIOCGBTNMAP constants; software compiled with the old values no longer works with kernels following 2.6.28, because the ioctl switch statement no longer matches the values given by the software. This patch handles these ioctls independently of the length of data specified, and applies the same treatment to JSIOCSAXMAP and JSIOCGAXMAP which currently depend on ABS_MAX. Signed-off-by: Stephen Kitt <steve@sk2.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-13Input: fix EVIOCGNAME/JSIOCGNAME regressionDaniel Mack1-1/+1
Commit 3d5cb60e ("Input: simplify name handling for certain input handles") introduced a regression for the EVIOCGNAME/JSIOCGNAME ioctl. Before this, patch, the platform device's name was given back to userspace which was good to identify devices. After this patch, the device is ("event%d", minor) which is not descriptive at all. This fixes the behaviour by taking dev->name. Reported-by: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Daniel Mack <daniel@caiaq.de> Reviewed-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-11Merge commit 'v2.6.30' into nextDmitry Torokhov1-1/+7
2009-05-11Input: simplify name handling for certain input handlesThadeu Lima de Souza Cascardo1-7/+7
For evdev, joydev and mousedev, instead of having a separate character array holding name of the handle, use struct devce's name which is the same. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-07Input: joydev - blacklist digitizersTim Cole1-1/+7
BTN_TOUCH is not set by the wacom driver which causes it to be handled by the joydev driver while the resulting device is broken. This causes problems with applications that try to use a joystick device. Ubuntu BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/300143 Signed-off-by: Tim Cole <tim.cole@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Amit Kucheria <amit.kucheria@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-16Rationalize fasync return valuesJonathan Corbet1-4/+1
Most fasync implementations do something like: return fasync_helper(...); But fasync_helper() will return a positive value at times - a feature used in at least one place. Thus, a number of other drivers do: err = fasync_helper(...); if (err < 0) return err; return 0; In the interests of consistency and more concise code, it makes sense to map positive return values onto zero where ->fasync() is called. Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2008-12-20Merge commit 'v2.6.28-rc9' into nextDmitry Torokhov1-1/+0
2008-11-01saner FASYNC handling on file closeAl Viro1-1/+0
As it is, all instances of ->release() for files that have ->fasync() need to remember to evict file from fasync lists; forgetting that creates a hole and we actually have a bunch that *does* forget. So let's keep our lives simple - let __fput() check FASYNC in file->f_flags and call ->fasync() there if it's been set. And lose that crap in ->release() instances - leaving it there is still valid, but we don't have to bother anymore. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-30Input: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers1-1/+1
Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-01Input: make sure input interfaces pin parent input devicesDmitry Torokhov1-1/+2
Recent driver core change causes references to parent devices being dropped early, at device_del() time, as opposed to when all children are freed. This causes oops in evdev with grabbed devices. Take the reference to the parent input device ourselves to ensure that it stays around long enough. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-10-19get rid of input BIT* duplicate definesJiri Slaby1-8/+8
get rid of input BIT* duplicate defines use newly global defined macros for input layer. Also remove includes of input.h from non-input sources only for BIT macro definiton. Define the macro temporarily in local manner, all those local definitons will be removed further in this patchset (to not break bisecting). BIT macro will be globally defined (1<<x) Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: <dtor@mail.ru> Acked-by: Jiri Kosina <jkosina@suse.cz> Cc: <lenb@kernel.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Cc: <perex@suse.cz> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: <vernux@us.ibm.com> Cc: <malattia@linux.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13Input: use full RCU APIDmitry Torokhov1-7/+4
RT guys alerted me to the fact that in their tree spinlocks are preemptible and it is better to use full RCU API (rcu_read_lock()/rcu_read_unlock()) to be safe. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-10-12Input: fix open count handling in input interfacesOliver Neukum1-1/+4
If input_open_device() fails we should not leave interfaces marked as opened. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-08-30Input: joydev - implement proper lockingDmitry Torokhov1-251/+492
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: convert from class devices to standard devicesDmitry Torokhov1-41/+43
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-04Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: reduce raciness when input handlers disconnect Input: ucb1x00 - do not access input_dev->private directly Input: logips2pp - fix typo in Kconfig Input: db9 - do not ignore dev2 module parameter
2007-06-03Input: reduce raciness when input handlers disconnectDmitry Torokhov1-1/+1
There is a race between input handler's release() and disconnect() methods: when input handler disconnects it wakes up all regular users and then process to walk user list to wake up async. users. While disconnect() walks the list release() removes elements of the same list causing oopses. While this is not a substibute for proper locking we can reduce odds of getting an oops if we wake up normal readers after walking the list. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-08header cleaning: don't include smp_lock.h when not usedRandy Dunlap1-1/+0
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-04Merge branch 'for-linus' of ↵Linus Torvalds1-73/+112
master.kernel.org:/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/dtor/input: (65 commits) Input: gpio_keys - add support for switches (EV_SW) Input: cobalt_btns - convert to use polldev library Input: add skeleton for simple polled devices Input: update some documentation Input: wistron - fix typo in keymap for Acer TM610 Input: add input_set_capability() helper Input: i8042 - add Fujitsu touchscreen/touchpad PNP IDs Input: i8042 - add Panasonic CF-29 to nomux list Input: lifebook - split into 2 devices Input: lifebook - add signature of Panasonic CF-29 Input: lifebook - activate 6-byte protocol on select models Input: lifebook - work properly on Panasonic CF-18 Input: cobalt buttons - separate device and driver registration Input: ati_remote - make button repeat sensitivity configurable Input: pxa27x - do not use deprecated SA_INTERRUPT flag Input: ucb1400 - make delays configurable Input: misc devices - switch to using input_dev->dev.parent Input: joysticks - switch to using input_dev->dev.parent Input: touchscreens - switch to using input_dev->dev.parent Input: mice - switch to using input_dev->dev.parent ... Fixed up conflicts with core device model removal of "struct subsystem" manually. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Privacy Policy