aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/soc/fsl
AgeCommit message (Collapse)AuthorFilesLines
2018-01-22soc: fsl: guts: Add a NULL check for devm_kasprintf()Fabio Estevam1-0/+6
devm_kasprintf() may fail, so we should better add a NULL check and propagate an error on failure. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2017-12-08soc: fsl: support GUTS driver for ls1012a/ls1046ayangbo lu1-0/+2
This patch is to add compatible strings "fsl,ls1021a-dcfg" and "fsl,ls1043a-dcfg" into device match table of GUTS driver. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2017-11-16Merge tag 'armsoc-drivers' of ↵Linus Torvalds14-116/+294
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "This branch contains platform-related driver updates for ARM and ARM64, these are the areas that bring the changes: New drivers: - driver support for Renesas R-Car V3M (R8A77970) - power management support for Amlogic GX - a new driver for the Tegra BPMP thermal sensor - a new bus driver for Technologic Systems NBUS Changes for subsystems that prefer to merge through arm-soc: - the usual updates for reset controller drivers from Philipp Zabel, with five added drivers for SoCs in the arc, meson, socfpa, uniphier and mediatek families - updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla, Heiner Kallweit and Lorenzo Pieralisi Changes specific to some ARM-based SoC - the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on ARM as well - several changes for power management on Broadcom SoCs - various improvements on Qualcomm, Broadcom, Amlogic, Atmel, Mediatek - minor Cleanups for Samsung, TI OMAP SoCs" [ NOTE! This doesn't work without the previous ARM SoC device-tree pull, because the R8A77970 driver is missing a header file that came from that pull. The fact that this got merged afterwards only fixes it at this point, and bisection of that driver will fail if/when you walk into the history of that driver. - Linus ] * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits) soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader bus: add driver for the Technologic Systems NBUS memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg() soc: qcom: remove unused label soc: amlogic: gx pm domain: add PM and OF dependencies drivers/firmware: psci_checker: Add missing destroy_timer_on_stack() dt-bindings: power: add amlogic meson power domain bindings soc: amlogic: add Meson GX VPU Domains driver soc: qcom: Remote filesystem memory driver dt-binding: soc: qcom: Add binding for rmtfs memory of: reserved_mem: Accessor for acquiring reserved_mem of/platform: Generalize /reserved-memory handling soc: mediatek: pwrap: fix fatal compiler error soc: mediatek: pwrap: fix compiler errors arm64: mediatek: cleanup message for platform selection soc: Allow test-building of MediaTek drivers soc: mediatek: place Kconfig for all SoC drivers under menu soc: mediatek: pwrap: add support for MT7622 SoC soc: mediatek: pwrap: add common way for setup CS timing extenstion soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap ..
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2-0/+2
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-22soc/fsl/qbman: Enable FSL_LAYERSCAPE config on ARMMadalin Bucur1-1/+1
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> [Stuart: changed to use ARCH_LAYERSCAPE] Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2017-09-22soc/fsl/qbman: Add missing headers on ARMClaudiu Manoil1-0/+2
Unlike PPC builds, ARM builds need following headers explicitly: +#include <linux/io.h> for ioread32be() +#include <linux/delay.h> for udelay() Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2017-09-22soc/fsl/qbman: different register offsets on ARMMadalin Bucur2-0/+60
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2017-09-22soc/fsl/qbman: add QMAN_REV32Madalin Bucur2-0/+3
Add revision 3.2 of the QBMan block. This is the version for LS1043A and LS1046A SoCs. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2017-09-22soc/fsl/qbman: Rework portal mapping calls for ARM/PPCRoy Pledge7-66/+60
Rework portal mapping for PPC and ARM. The PPC devices require a cacheable coherent mapping while ARM will work with a non-cachable/write combine mapping. This also eliminates the need for manual cache flushes on ARM. This also fixes the code so sparse checking is clean. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2017-09-22soc/fsl/qbman: Fix ARM32 typoValentin Rothberg1-1/+1
The Kconfig symbol for 32bit ARM is 'ARM', not 'ARM32'. Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2017-09-22soc/fsl/qbman: Drop L1_CACHE_BYTES compile time checkClaudiu Manoil1-4/+0
Not relevant and arch dependent. Overkill for PPC. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2017-09-22soc/fsl/qbman: Drop set/clear_bits usageMadalin Bucur2-5/+5
Replace PPC specific set/clear_bits API with standard bit twiddling so driver is portalable outside PPC. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2017-09-22soc/fsl/qbman: Use shared-dma-pool for QMan private memory allocationsRoy Pledge3-34/+63
Use the shared-memory-pool mechanism for frame queue descriptor and packed frame descriptor record area allocations. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2017-09-22soc/fsl/qbman: Use shared-dma-pool for BMan private memory allocationsRoy Pledge1-0/+15
Use the shared-memory-pool mechanism for free buffer proxy record area allocation. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2017-09-22soc/fsl/qbman: Add common routine for QBMan private allocationsRoy Pledge3-1/+83
The QBMan device uses several memory regions to manage frame queues and buffers. Add a common routine for extracting and initializing these reserved memory areas. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2017-09-22soc/fsl/guts: Add compatible string for LS1088ashish kumar1-0/+1
Adding compatible string "ls1088a-dcfg" so that guts driver can be init for ls1088 Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2017-09-22soc/fsl/qman: Sleep instead of stuck hacking jiffiesKarim Eshapa1-5/+1
Use msleep() instead of stucking with long delay will be more efficient. Signed-off-by: Karim Eshapa <karim.eshapa@gmail.com> Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2017-08-16soc: Convert to using %pOF instead of full_nameRob Herring5-25/+20
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Cc: Scott Wood <oss@buserror.net> Cc: Qiang Zhao <qiang.zhao@nxp.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-05-12Merge tag 'powerpc-4.12-2' of ↵Linus Torvalds3-5/+27
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: "The change to the Linux page table geometry was delayed for more testing with 16G pages, and there's the new CPU features stuff which just needed one more polish before going in. Plus a few changes from Scott which came in a bit late. And then various fixes, mostly minor. Summary highlights: - rework the Linux page table geometry to lower memory usage on 64-bit Book3S (IBM chips) using the Hash MMU. - support for a new device tree binding for discovering CPU features on future firmwares. - Freescale updates from Scott: "Includes a fix for a powerpc/next mm regression on 64e, a fix for a kernel hang on 64e when using a debugger inside a relocated kernel, a qman fix, and misc qe improvements." Thanks to: Christophe Leroy, Gavin Shan, Horia Geantă, LiuHailong, Nicholas Piggin, Roy Pledge, Scott Wood, Valentin Longchamp" * tag 'powerpc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Support new device tree binding for discovering CPU features powerpc: Don't print cpu_spec->cpu_name if it's NULL of/fdt: introduce of_scan_flat_dt_subnodes and of_get_flat_dt_phandle powerpc/64s: Fix unnecessary machine check handler relocation branch powerpc/mm/book3s/64: Rework page table geometry for lower memory usage powerpc: Fix distclean with Makefile.postlink powerpc/64e: Don't place the stack beyond TASK_SIZE powerpc/powernv: Block PCI config access on BCM5718 during EEH recovery powerpc/8xx: Adding support of IRQ in MPC8xx GPIO soc/fsl/qbman: Disable IRQs for deferred QBMan work soc/fsl/qe: add EXPORT_SYMBOL for the 2 qe_tdm functions soc/fsl/qe: only apply QE_General4 workaround on affected SoCs soc/fsl/qe: round brg_freq to 1kHz granularity soc/fsl/qe: get rid of immrbar_virt_to_phys() net: ethernet: ucc_geth: fix MEM_PART_MURAM mode powerpc/64e: Fix hang when debugging programs with relocated kernel
2017-05-09Merge tag 'iommu-updates-v4.12' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - code optimizations for the Intel VT-d driver - ability to switch off a previously enabled Intel IOMMU - support for 'struct iommu_device' for OMAP, Rockchip and Mediatek IOMMUs - header optimizations for IOMMU core code headers and a few fixes that became necessary in other parts of the kernel because of that - ACPI/IORT updates and fixes - Exynos IOMMU optimizations - updates for the IOMMU dma-api code to bring it closer to use per-cpu iova caches - new command-line option to set default domain type allocated by the iommu core code - another command line option to allow the Intel IOMMU switched off in a tboot environment - ARM/SMMU: TLB sync optimisations for SMMUv2, Support for using an IDENTITY domain in conjunction with DMA ops, Support for SMR masking, Support for 16-bit ASIDs (was previously broken) - various other small fixes and improvements * tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (63 commits) soc/qbman: Move dma-mapping.h include to qman_priv.h soc/qbman: Fix implicit header dependency now causing build fails iommu: Remove trace-events include from iommu.h iommu: Remove pci.h include from trace/events/iommu.h arm: dma-mapping: Don't override dma_ops in arch_setup_dma_ops() ACPI/IORT: Fix CONFIG_IOMMU_API dependency iommu/vt-d: Don't print the failure message when booting non-kdump kernel iommu: Move report_iommu_fault() to iommu.c iommu: Include device.h in iommu.h x86, iommu/vt-d: Add an option to disable Intel IOMMU force on iommu/arm-smmu: Return IOVA in iova_to_phys when SMMU is bypassed iommu/arm-smmu: Correct sid to mask iommu/amd: Fix incorrect error handling in amd_iommu_bind_pasid() iommu: Make iommu_bus_notifier return NOTIFY_DONE rather than error code omap3isp: Remove iommu_group related code iommu/omap: Add iommu-group support iommu/omap: Make use of 'struct iommu_device' iommu/omap: Store iommu_dev pointer in arch_data iommu/omap: Move data structures to omap-iommu.h iommu/omap: Drop legacy-style device support ...
2017-05-04soc/qbman: Move dma-mapping.h include to qman_priv.hPaul Gortmaker2-2/+1
With the include there it fixes all build failures in this directory caused by commit 461a6946b1f9. Fixes: 461a6946b1f9 ("iommu: Remove pci.h include from trace/events/iommu.h") Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-05-03soc/qbman: Fix implicit header dependency now causing build failsPaul Gortmaker1-0/+2
In commit 461a6946b1f9 ("iommu: Remove pci.h include from trace/events/iommu.h") that header shuffle uncovered an implicit include in this driver, manifesting as: CC drivers/soc/fsl/qbman/qman_portal.o drivers/soc/fsl/qbman/qman_portal.c: In function 'qman_portal_probe': drivers/soc/fsl/qbman/qman_portal.c:299:2: error: implicit declaration of function 'dma_set_mask' drivers/soc/fsl/qbman/qman_portal.c:299:2: error: implicit declaration of function 'DMA_BIT_MASK' if (dma_set_mask(dev, DMA_BIT_MASK(40))) { ^ on the corenet32_smp_defconfig (and 64 bit respectively.) The above commit was singled out via git bisect. The header it was implictly relying on getting was dma-mapping.h - so we explicitly add it here. Fixes: 461a6946b1f9 ("iommu: Remove pci.h include from trace/events/iommu.h") Cc: Joerg Roedel <jroedel@suse.de> Cc: Scott Wood <oss@buserror.net> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-04-30soc/fsl/qbman: Disable IRQs for deferred QBMan workRoy Pledge1-0/+5
Work for Congestion State Notifications (CSCN) and Message Ring (MR) handling is handled via the workqueue mechanism. This requires the driver to disable those IRQs before scheduling the work and re-enabling it once the work is completed so that the interrupt doesn't continually fire. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2017-04-30soc/fsl/qe: add EXPORT_SYMBOL for the 2 qe_tdm functionsValentin Longchamp1-0/+2
This allows to build the fsl_ucc_hdlc driver as a module. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Scott Wood <oss@buserror.net>
2017-04-30soc/fsl/qe: only apply QE_General4 workaround on affected SoCsValentin Longchamp1-2/+6
The QE_General4 workaround is only valid for the MPC832x and MPC836x SoCs. The other SoCs that embed a QUICC engine are not affected by this hardware bug and thus can use the computed divisors (this was successfully tested on the T1040). Similalry to what was done in commit 8ce795cb0c6b ("i2c: mpc: assign the correct prescaler from SVR") in order to avoid changes in the device tree nodes of the QE (with maybe a variant of the compatible property), the PVR reg is read out to find out if the workaround must be applied or not. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Scott Wood <oss@buserror.net>
2017-04-30soc/fsl/qe: round brg_freq to 1kHz granularityValentin Longchamp1-0/+13
Because of integer computation rounding in u-boot (that sets the QE brg-frequency DTS prop), the clk value is 99999999 Hz even though it is 100 MHz. When setting brg clks that are exact divisors of 100 MHz, this small differnce plays a role and can result in lower clks to be output (for instance 20 MHz - divide by 5 - results in 16.666 MHz - divide by 6). This patch fixes that by "forcing" the brg_clk to the nearest kHz when the difference is below 2 integer rounding errors (i.e. 4). Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Scott Wood <oss@buserror.net>
2017-04-30soc/fsl/qe: get rid of immrbar_virt_to_phys()Christophe Leroy1-3/+1
immrbar_virt_to_phys() is not used anymore Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Li Yang <pku.leo@gmail.com> Signed-off-by: Scott Wood <oss@buserror.net>
2017-03-24soc/qman: export non-programmable FQD fields queryHoria Geantă2-63/+2
Export qman_query_fq_np() function and related structures. This will be needed in the caam/qi driver, where "queue empty" condition will be decided based on the frm_cnt. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-24soc/qman: add dedicated channel ID for CAAMHoria Geantă1-1/+5
Add and export the ID of the channel serviced by the CAAM (Cryptographic Acceleration and Assurance Module) DCP. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-24soc/qman: export volatile dequeue related structsHoria Geantă1-36/+0
Since qman_volatile_dequeue() is already exported, move the related structures into the public header too. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar1-0/+1
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-16Merge tag 'powerpc-4.10-1' of ↵Linus Torvalds11-192/+202
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights include: - Support for the kexec_file_load() syscall, which is a prereq for secure and trusted boot. - Prevent kernel execution of userspace on P9 Radix (similar to SMEP/PXN). - Sort the exception tables at build time, to save time at boot, and store them as relative offsets to save space in the kernel image & memory. - Allow building the kernel with thin archives, which should allow us to build an allyesconfig once some other fixes land. - Build fixes to allow us to correctly rebuild when changing the kernel endian from big to little or vice versa. - Plumbing so that we can avoid doing a full mm TLB flush on P9 Radix. - Initial stack protector support (-fstack-protector). - Support for dumping the radix (aka. Linux) and hash page tables via debugfs. - Fix an oops in cxl coredump generation when cxl_get_fd() is used. - Freescale updates from Scott: "Highlights include 8xx hugepage support, qbman fixes/cleanup, device tree updates, and some misc cleanup." - Many and varied fixes and minor enhancements as always. Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anshuman Khandual, Anton Blanchard, Balbir Singh, Bartlomiej Zolnierkiewicz, Christophe Jaillet, Christophe Leroy, Denis Kirjanov, Elimar Riesebieter, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand, Jack Miller, Johan Hovold, Lars-Peter Clausen, Libin, Madhavan Srinivasan, Michael Neuling, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Pan Xinhui, Peter Senna Tschudin, Rashmica Gupta, Rui Teng, Russell Currey, Scott Wood, Simon Guo, Suraj Jitindar Singh, Thiago Jung Bauermann, Tobias Klauser, Vaibhav Jain" [ And thanks to Michael, who took time off from a new baby to get this pull request done. - Linus ] * tag 'powerpc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (174 commits) powerpc/fsl/dts: add FMan node for t1042d4rdb powerpc/fsl/dts: add sg_2500_aqr105_phy4 alias on t1024rdb powerpc/fsl/dts: add QMan and BMan nodes on t1024 powerpc/fsl/dts: add QMan and BMan nodes on t1023 soc/fsl/qman: test: use DEFINE_SPINLOCK() powerpc/fsl-lbc: use DEFINE_SPINLOCK() powerpc/8xx: Implement support of hugepages powerpc: get hugetlbpage handling more generic powerpc: port 64 bits pgtable_cache to 32 bits powerpc/boot: Request no dynamic linker for boot wrapper soc/fsl/bman: Use resource_size instead of computation soc/fsl/qe: use builtin_platform_driver powerpc/fsl_pmc: use builtin_platform_driver powerpc/83xx/suspend: use builtin_platform_driver powerpc/ftrace: Fix the comments for ftrace_modify_code powerpc/perf: macros for power9 format encoding powerpc/perf: power9 raw event format encoding powerpc/perf: update attribute_group data structure powerpc/perf: factor out the event format field powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown ...
2016-12-13Merge tag 'mmc-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds3-0/+258
Pull MMC updates from Ulf Hansson: "It's been an busy period for mmc. Quite some changes in the mmc core, two new mmc host drivers, some existing drivers being extended to support new IP versions and lots of other updates. MMC core: - Delete eMMC packed command support - Introduce mmc_abort_tuning() to enable eMMC tuning to fail gracefully - Introduce mmc_can_retune() to see if a host can be retuned - Re-work and improve the sequence when sending a CMD6 for mmc - Enable CDM13 polling when switching to HS and HS DDR mode for mmc - Relax checking for CMD6 errors after switch to HS200 - Re-factoring the code dealing with the mmc block queue - Recognize whether the eMMC card supports CMDQ - Fix 4K native sector check - Don't power off the card when starting the host - Increase MMC_IOC_MAX_BYTES to support bigger firmware binaries - Improve error handling and drop meaningless BUG_ONs() - Lots of clean-ups and changes to improve the quality of the code MMC host: - sdhci: Fix tuning sequence and clean-up the related code - sdhci: Add support to via DT override broken SDHCI cap register bits - sdhci-cadence: Add new driver for Cadence SD4HC SDHCI variant - sdhci-msm: Update clock management - sdhci-msm: Add support for eMMC HS400 mode - sdhci-msm: Deploy runtime/system PM support - sdhci-iproc: Extend driver support to newer IP versions - sdhci-pci: Add support for Intel GLK - sdhci-pci: Add support for Intel NI byt sdio - sdhci-acpi: Add support for 80860F14 UID 2 SDIO bus - sdhci: Lots of various small improvements and clean-ups - tmio: Add support for tuning - sh_mobile_sdhi: Add support for tuning - sh_mobile_sdhi: Extend driver to support SDHI IP on R7S72100 SoC - sh_mobile_sdhi: remove support for sh7372 - davinci: Use mmc_of_parse() to enable generic mmc DT bindings - meson: Add new driver to support GX platforms - dw_mmc: Deploy generic runtime/system PM support - dw_mmc: Lots of various small improvements As a part of the mmc changes this time, I have also pulled in an immutable branch/tag (soc-device-match-tag1) hosted by Geert Uytterhoeven, to share the implementation of the new soc_device_match() interface. This is needed by these mmc related changes: - mmc: sdhci-of-esdhc: Get correct IP version for T4240-R1.0-R2.0 - soc: fsl: add GUTS driver for QorIQ platforms" * tag 'mmc-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (136 commits) mmc: sdhci-cadence: add Cadence SD4HC support mmc: sdhci: export sdhci_execute_tuning() mmc: sdhci: Tidy tuning loop mmc: sdhci: Simplify tuning block size logic mmc: sdhci: Factor out tuning helper functions mmc: sdhci: Use mmc_abort_tuning() mmc: mmc: Introduce mmc_abort_tuning() mmc: sdhci: Always allow tuning to fall back to fixed sampling mmc: sdhci: Fix tuning reset after exhausting the maximum number of loops mmc: sdhci: Fix recovery from tuning timeout Revert "mmc: sdhci: Reset cmd and data circuits after tuning failure" mmc: mmc: Relax checking for switch errors after HS200 switch mmc: sdhci-acpi: support 80860F14 UID 2 SDIO bus mmc: sdhci-of-at91: remove bogus MMC_SDHCI_IO_ACCESSORS select mmc: sdhci-pci: Use ACPI to get max frequency for Intel NI byt sdio mmc: sdhci-pci: Add PCI ID for Intel NI byt sdio mmc: sdhci-s3c: add spin_unlock_irq() before calling clk_round_rate mmc: dw_mmc: display the clock message only one time when card is polling mmc: dw_mmc: add the debug message for polling and non-removable mmc: dw_mmc: check the "present" variable before checking flags ...
2016-12-09soc/fsl/qman: test: use DEFINE_SPINLOCK()Fabian Frederick1-1/+1
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Scott Wood <oss@buserror.net>
2016-12-04soc/fsl/bman: Use resource_size instead of computationWei Yongjun1-2/+1
Use resource_size function on resource object instead of explicit computation. Generated by: scripts/coccinelle/api/resource_size.cocci Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-12-04soc/fsl/qe: use builtin_platform_driverGeliang Tang1-5/+1
Use builtin_platform_driver() helper to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-12-02soc/fsl/qbman: Convert to hotplug state machineSebastian Andrzej Siewior1-27/+12
Install the callbacks via the state machine. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Scott Wood <oss@buserror.net> Cc: Claudiu Manoil <claudiu.manoil@nxp.com> Cc: rt@linutronix.de Cc: Roy Pledge <roy.pledge@nxp.com> Link: http://lkml.kernel.org/r/20161126231350.10321-21-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-02soc/fsl/qbman: Convert to hotplug state machineSebastian Andrzej Siewior1-30/+16
Install the callbacks via the state machine. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Scott Wood <oss@buserror.net> Cc: Claudiu Manoil <claudiu.manoil@nxp.com> Cc: rt@linutronix.de Cc: Roy Pledge <roy.pledge@nxp.com> Link: http://lkml.kernel.org/r/20161126231350.10321-20-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-29soc: fsl: fix section mismatch build warningsSudeep Holla1-2/+5
We get the following warning with the driver is compiled in: WARNING: modpost: Found 1 section mismatch(es). To see full details build your kernel with: 'make CONFIG_DEBUG_SECTION_MISMATCH=y' With CONFIG_DEBUG_SECTION_MISMATCH enabled, the details are reported: WARNING: vmlinux.o(.text+0x55d014): Section mismatch in reference from the function fsl_guts_probe() to the function .init.text:of_flat_dt_get_machine_name() The function fsl_guts_probe() references the function __init of_flat_dt_get_machine_name(). This is often because fsl_guts_probe lacks a __init annotation or the annotation of of_flat_dt_get_machine_name is wrong. This patch fixes the issue by using the normal DT/OF API rather than the of_flat_* one. Cc: Scott Wood <oss@buserror.net> Cc: Yangbo Lu <yangbo.lu@nxp.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-29soc: fsl: add GUTS driver for QorIQ platformsyangbo lu3-0/+255
The global utilities block controls power management, I/O device enabling, power-onreset(POR) configuration monitoring, alternate function selection for multiplexed signals,and clock control. This patch adds a driver to manage and access global utilities block. Initially only reading SVR and registering soc device are supported. Other guts accesses, such as reading RCW, should eventually be moved into this driver as well. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-23soc/qman: Handle endianness of h/w descriptorsClaudiu Manoil4-39/+45
The hardware descriptors have big endian (BE) format. Provide proper endianness handling for the remaining descriptor fields, to ensure they are correctly accessed by non-BE CPUs too. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-11-23soc/qman: Clean up CGR CSCN target update operationsClaudiu Manoil1-14/+23
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-11-23soc/qman: Change remaining contextB into context_bClaudiu Manoil1-6/+6
There are multiple occurences of both contextB and context_b in different h/w descriptors, referring to the same descriptor field known as "Context B". Stick with the "context_b" naming, for obvious reasons including consistency (see also context_a). Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-11-23soc/qbman: Handle endianness of qm/bm_in/out()Claudiu Manoil2-6/+6
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-11-23soc/qman: Drop unused field from eqcr/dqrr descriptorsClaudiu Manoil1-2/+1
ORP ("Order Restoration Point") mechanism not supported. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-11-23soc/qman: Fix accesses to fqid, cleanupClaudiu Manoil1-16/+16
Preventively mask every access to the 'fqid' h/w field, since it is defined as a 24-bit field, for every h/w descriptor. Add generic accessors for this field to ensure correct access. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-11-23soc/qman: Remove unused struct qm_mcc* layoutsClaudiu Manoil2-46/+18
1. qm_mcc_querywq layout not used for now, so drop it; 2. queryfq, queryfq_np and alterfq are used only for accesses to the 'fqid' field, so replace these with a generic 'fq' layout. As a consequence, 'querycgr' turns into 'cgr' following the same reasoning above and for consistent naming. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-11-23soc/qman: Remove redundant checks from qman_create_cgr()Claudiu Manoil1-4/+4
opts is checked redundantly. Move local_opts declaration inside its usage scope. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-11-23soc/qman: test: Don't use dummy platform device for dma mappingClaudiu Manoil3-11/+22
Replace dummy platform device hack with a reference to a portal's platform device, in order to dma map the test frame for this small unit test. The 2 qman symbols need to be exported because this self test is a kernel module. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-11-23soc/qman: Don't add a new platform device for dma mappingClaudiu Manoil3-21/+22
The qman portals are platform devices themselves, so they should handle dma mappings. Creating a dummy platform device in order to support dma mapping operations is not justified (and not portable). Instead, do the mapping against the first portal that has been initialised. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>

Privacy Policy