path: root/drivers/target/target_core_file.c
AgeCommit message (Collapse)AuthorFilesLines
2017-11-04target/file: Do not return error for UNMAP if length is zeroJiang Yi1-0/+4
The function fd_execute_unmap() in target_core_file.c calles ret = file->f_op->fallocate(file, mode, pos, len); Some filesystems implement fallocate() to return error if length is zero (e.g. btrfs) but according to SCSI Block Commands spec UNMAP should return success for zero length. Signed-off-by: Jiang Yi <jiangyilism@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-09-04fs: fix kernel_write prototypeChristoph Hellwig1-1/+1
Make the position an in/out argument like all the other read/write helpers and and make the buf argument a void pointer. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-13Merge branch 'for-next' of ↵Linus Torvalds1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "It's been usually busy for summer, with most of the efforts centered around TCMU developments and various target-core + fabric driver bug fixing activities. Not particularly large in terms of LoC, but lots of smaller patches from many different folks. The highlights include: - ibmvscsis logical partition manager support (Michael Cyr + Bryant Ly) - Convert target/iblock WRITE_SAME to blkdev_issue_zeroout (hch + nab) - Add support for TMR percpu LUN reference counting (nab) - Fix a potential deadlock between EXTENDED_COPY and iscsi shutdown (Bart) - Fix COMPARE_AND_WRITE caw_sem leak during se_cmd quiesce (Jiang Yi) - Fix TMCU module removal (Xiubo Li) - Fix iser-target OOPs during login failure (Andrea Righi + Sagi) - Breakup target-core free_device backend driver callback (mnc) - Perform TCMU add/delete/reconfig synchronously (mnc) - Fix TCMU multiple UIO open/close sequences (mnc) - Fix TCMU CHECK_CONDITION sense handling (mnc) - Fix target-core SAM_STAT_BUSY + TASK_SET_FULL handling (mnc + nab) - Introduce TYPE_ZBC support in PSCSI (Damien Le Moal) - Fix possible TCMU memory leak + OOPs when recalculating cmd base size (Xiubo Li + Bryant Ly + Damien Le Moal + mnc) - Add login_keys_workaround attribute for non RFC initiators (Robert LeBlanc + Arun Easi + nab)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (68 commits) iscsi-target: Add login_keys_workaround attribute for non RFC initiators Revert "qla2xxx: Fix incorrect tcm_qla2xxx_free_cmd use during TMR ABORT" tcmu: clean up the code and with one small fix tcmu: Fix possbile memory leak / OOPs when recalculating cmd base size target: export lio pgr/alua support as device attr target: Fix return sense reason in target_scsi3_emulate_pr_out target: Fix cmd size for PR-OUT in passthrough_parse_cdb tcmu: Fix dev_config_store target: pscsi: Introduce TYPE_ZBC support target: Use macro for WRITE_VERIFY_32 operation codes target: fix SAM_STAT_BUSY/TASK_SET_FULL handling target: remove transport_complete pscsi: finish cmd processing from pscsi_req_done tcmu: fix sense handling during completion target: add helper to copy sense to se_cmd buffer target: do not require a transport_complete for SCF_TRANSPORT_TASK_SENSE target: make device_mutex and device_list static tcmu: Fix flushing cmd entry dcache page tcmu: fix multiple uio open/close sequences tcmu: drop configured check in destroy ...
2017-07-06target: break up free_device callbackMike Christie1-1/+6
With this patch free_device is now used to free what is allocated in the alloc_device callback and destroy_device tears down the resources that are setup in the configure_device callback. This patch will be needed in the next patch where tcmu needs to be able to look up the device in the destroy callback. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-06-29fs: implement vfs_iter_write using do_iter_writeChristoph Hellwig1-2/+2
De-dupliate some code and allow for passing the flags argument to vfs_iter_write. Additionally it now properly updates timestamps. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-29fs: implement vfs_iter_read using do_iter_readChristoph Hellwig1-1/+1
De-dupliate some code and allow for passing the flags argument to vfs_iter_read. Additional it properly updates atime now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-07target/fileio: Fix zero-length READ and WRITE handlingBart Van Assche1-2/+1
This patch fixes zero-length READ and WRITE handling in target/FILEIO, which was broken a long time back by: Since: commit d81cb44726f050d7cf1be4afd9cb45d153b52066 Author: Paolo Bonzini <pbonzini@redhat.com> Date: Mon Sep 17 16:36:11 2012 -0700 target: go through normal processing for all zero-length commands which moved zero-length READ and WRITE completion out of target-core, to doing submission into backend driver code. To address this, go ahead and invoke target_complete_cmd() for any non negative return value in fd_do_rw(). Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: David Disseldorp <ddiss@suse.de> Cc: <stable@vger.kernel.org> # v3.7+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-01tcm: make pi data verification configurableDmitry Monakhov1-2/+4
Currently ramdisk and fileio always perform PI verification before and after backend IO. This approach is not very flexible. Because some one may want to postpone this work to other layers in IO stack. For example if we want to test blk_integrity_profile testcase: https://github.com/dmonakhov/xfstests/commit/dee408c868861d6b6871dbb3381facee7effdbe4 Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-01tcm_fileio: Prevent information leak for short readsDmitry Monakhov1-6/+17
If we failed to read data from backing file (probably because some one truncate file under us), we must zerofill cmd's data, otherwise it will be returned as is. Most likely cmd's data are unitialized pages from page cache. This result in information leak. (Change BUG_ON into -EINVAL se_cmd failure - nab) testcase: https://github.com/dmonakhov/xfstests/commit/e11a1b7b907ca67b1be51a1594025600767366d5 Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-12-09target: Minimize #include directivesBart Van Assche1-0/+1
Remove superfluous #include directives from the include/target/*.h files. Add missing #include directives to other *.h and *.c files. Use forward declarations for structures where possible. This change reduces the build time for make M=drivers/target on my laptop from 27.1s to 18.7s or by about 30%. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
2016-07-23target: fix spelling mistake: "limitiation" -> "limitation"Colin Ian King1-1/+1
trivial fix to spelling mistake Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-07-20target: Fix max_unmap_lba_count calc overflowMike Christie1-2/+1
max_discard_sectors only 32bits, and some non scsi backend devices will set this to the max 0xffffffff, so we can end up overflowing during the max_unmap_lba_count calculation. This fixes a regression caused by my patch: commit 8a9ebe717a133ba7bc90b06047f43cc6b8bcb8b3 Author: Mike Christie <mchristi@redhat.com> Date: Mon Jan 18 14:09:27 2016 -0600 target: Fix WRITE_SAME/DISCARD conversion to linux 512b sectors which can result in extra discards being sent to due the overflow causing max_unmap_lba_count to be smaller than what the backing device can actually support. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-29target: Fix WRITE_SAME/DISCARD conversion to linux 512b sectorsMike Christie1-20/+9
In a couple places we are not converting to/from the Linux block layer 512 bytes sectors. 1. The request queue values and what we do are a mismatch of things: max_discard_sectors - This is in linux block layer 512 byte sectors. We are just copying this to max_unmap_lba_count. discard_granularity - This is in bytes. We are converting it to Linux block layer 512 byte sectors. discard_alignment - This is in bytes. We are just copying this over. The problem is that the core LIO code exports these values in spc_emulate_evpd_b0 and we use them to test request arguments in sbc_execute_unmap, but we never convert to the block size we export to the initiator. If we are not using 512 byte sectors then we are exporting the wrong values or are checks are off. And, for the discard_alignment/bytes case we are just plain messed up. 2. blkdev_issue_discard's start and number of sector arguments are supposed to be in linux block layer 512 byte sectors. We are currently passing in the values we get from the initiator which might be based on some other sector size. There is a similar problem in iblock_execute_write_same where the bio functions want values in 512 byte sectors but we are passing in what we got from the initiator. Signed-off-by: Mike Christie <mchristi@redhat.com> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-07-04Merge branch 'for-next' of ↵Linus Torvalds1-188/+47
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "It's been a busy development cycle for target-core in a number of different areas. The fabric API usage for se_node_acl allocation is now within target-core code, dropping the external API callers for all fabric drivers tree-wide. There is a new conversion to RCU hlists for se_node_acl and se_portal_group LUN mappings, that turns fast-past LUN lookup into a completely lockless code-path. It also removes the original hard-coded limitation of 256 LUNs per fabric endpoint. The configfs attributes for backends can now be shared between core and driver code, allowing existing drivers to use common code while still allowing flexibility for new backend provided attributes. The highlights include: - Merge sbc_verify_dif_* into common code (sagi) - Remove iscsi-target support for obsolete IFMarker/OFMarker (Christophe Vu-Brugier) - Add bidi support in target/user backend (ilias + vangelis + agover) - Move se_node_acl allocation into target-core code (hch) - Add crc_t10dif_update common helper (akinobu + mkp) - Handle target-core odd SGL mapping for data transfer memory (akinobu) - Move transport ID handling into target-core (hch) - Move task tag into struct se_cmd + support 64-bit tags (bart) - Convert se_node_acl->device_list[] to RCU hlist (nab + hch + paulmck) - Convert se_portal_group->tpg_lun_list[] to RCU hlist (nab + hch + paulmck) - Simplify target backend driver registration (hch) - Consolidate + simplify target backend attribute implementations (hch + nab) - Subsume se_port + t10_alua_tg_pt_gp_member into se_lun (hch) - Drop lun_sep_lock for se_lun->lun_se_dev RCU usage (hch + nab) - Drop unnecessary core_tpg_register TFO parameter (nab) - Use 64-bit LUNs tree-wide (hannes) - Drop left-over TARGET_MAX_LUNS_PER_TRANSPORT limit (hannes)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (76 commits) target: Bump core version to v5.0 target: remove target_core_configfs.h target: remove unused TARGET_CORE_CONFIG_ROOT define target: consolidate version defines target: implement WRITE_SAME with UNMAP bit using ->execute_unmap target: simplify UNMAP handling target: replace se_cmd->execute_rw with a protocol_data field target/user: Fix inconsistent kmap_atomic/kunmap_atomic target: Send UA when changing LUN inventory target: Send UA upon LUN RESET tmr completion target: Send UA on ALUA target port group change target: Convert se_lun->lun_deve_lock to normal spinlock target: use 'se_dev_entry' when allocating UAs target: Remove 'ua_nacl' pointer from se_ua structure target_core_alua: Correct UA handling when switching states xen-scsiback: Fix compile warning for 64-bit LUN target: Remove TARGET_MAX_LUNS_PER_TRANSPORT target: use 64-bit LUNs target: Drop duplicate + unused se_dev_check_wce target: Drop unnecessary core_tpg_register TFO parameter ...
2015-06-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-0/+1
Pull networking updates from David Miller: 1) Add TX fast path in mac80211, from Johannes Berg. 2) Add TSO/GRO support to ibmveth, from Thomas Falcon 3) Move away from cached routes in ipv6, just like ipv4, from Martin KaFai Lau. 4) Lots of new rhashtable tests, from Thomas Graf. 5) Run ingress qdisc lockless, from Alexei Starovoitov. 6) Allow servers to fetch TCP packet headers for SYN packets of new connections, for fingerprinting. From Eric Dumazet. 7) Add mode parameter to pktgen, for testing receive. From Alexei Starovoitov. 8) Cache access optimizations via simplifications of build_skb(), from Alexander Duyck. 9) Move page frag allocator under mm/, also from Alexander. 10) Add xmit_more support to hv_netvsc, from KY Srinivasan. 11) Add a counter guard in case we try to perform endless reclassify loops in the packet scheduler. 12) Extern flow dissector to be programmable and use it in new "Flower" classifier. From Jiri Pirko. 13) AF_PACKET fanout rollover fixes, performance improvements, and new statistics. From Willem de Bruijn. 14) Add netdev driver for GENEVE tunnels, from John W Linville. 15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso. 16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet. 17) Add an ECN retry fallback for the initial TCP handshake, from Daniel Borkmann. 18) Add tail call support to BPF, from Alexei Starovoitov. 19) Add several pktgen helper scripts, from Jesper Dangaard Brouer. 20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa. 21) Favor even port numbers for allocation to connect() requests, and odd port numbers for bind(0), in an effort to help avoid ip_local_port_range exhaustion. From Eric Dumazet. 22) Add Cavium ThunderX driver, from Sunil Goutham. 23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata, from Alexei Starovoitov. 24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai. 25) Double TCP Small Queues default to 256K to accomodate situations like the XEN driver and wireless aggregation. From Wei Liu. 26) Add more entropy inputs to flow dissector, from Tom Herbert. 27) Add CDG congestion control algorithm to TCP, from Kenneth Klette Jonassen. 28) Convert ipset over to RCU locking, from Jozsef Kadlecsik. 29) Track and act upon link status of ipv4 route nexthops, from Andy Gospodarek. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits) bridge: vlan: flush the dynamically learned entries on port vlan delete bridge: multicast: add a comment to br_port_state_selection about blocking state net: inet_diag: export IPV6_V6ONLY sockopt stmmac: troubleshoot unexpected bits in des0 & des1 net: ipv4 sysctl option to ignore routes when nexthop link is down net: track link-status of ipv4 nexthops net: switchdev: ignore unsupported bridge flags net: Cavium: Fix MAC address setting in shutdown state drivers: net: xgene: fix for ACPI support without ACPI ip: report the original address of ICMP messages net/mlx5e: Prefetch skb data on RX net/mlx5e: Pop cq outside mlx5e_get_cqe net/mlx5e: Remove mlx5e_cq.sqrq back-pointer net/mlx5e: Remove extra spaces net/mlx5e: Avoid TX CQE generation if more xmit packets expected net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq() net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device ...
2015-06-23Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-2/+1
Pull SCSI updates from James Bottomley: "This is the usual grab bag of driver updates (lpfc, hpsa, megaraid_sas, cxgbi, be2iscsi) plus an assortment of minor updates. There is also one new driver: the Cisco snic. The advansys driver has been rewritten to get rid of the warning about converting it to the DMA API, the tape statistics patch got in and finally, there's a resuffle of SCSI header files to separate more cleanly initiator from target mode (and better share the common definitions)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (156 commits) snic: driver for Cisco SCSI HBA qla2xxx: Fix indentation qla2xxx: Comment out unreachable code fusion: remove dead MTRR code advansys: fix compilation errors and warnings when CONFIG_PCI is not set mptsas: fix depth param in scsi_track_queue_full megaraid: fix irq setup process regression lpfc: Update version to for upstream patch set. lpfc: Fix to drop PLOGIs from fabric node till LOGO processing completes lpfc: Fix scsi task management error message. lpfc: Fix cq_id masking problem. lpfc: Fix scsi prep dma buf error. lpfc: Add support for using block multi-queue lpfc: Devices are not discovered during takeaway/giveback testing lpfc: Fix vport deletion failure. lpfc: Check for active portpeerbeacon. lpfc: Update driver version for upstream patch set lpfc: Change buffer pool empty message to miscellaneous category lpfc: Fix incorrect log message reported for empty FCF record. lpfc: Fix rport leak. ...
2015-06-23target: consolidate version definesChristoph Hellwig1-1/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-23target: implement WRITE_SAME with UNMAP bit using ->execute_unmapChristoph Hellwig1-21/+0
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-23target: simplify UNMAP handlingChristoph Hellwig1-14/+3
Move a little more processing into the core code, and lift the previous do_unmap callback into the sbc_ops structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-02target: Minimize SCSI header #include directivesBart Van Assche1-2/+1
Only include SCSI initiator header files in target code that needs these header files, namely the SCSI pass-through code and the tcm_loop driver. Change SCSI_SENSE_BUFFERSIZE into TRANSPORT_SENSE_BUFFER in target code because the former is intended for initiator code and the latter for target code. With this patch the only initiator include directives in target code that remain are as follows: $ git grep -nHE 'include .scsi/(scsi.h|scsi_host.h|scsi_device.h|scsi_cmnd.h)' drivers/target drivers/infiniband/ulp/{isert,srpt} drivers/usb/gadget/legacy/tcm_*.[ch] drivers/{vhost,xen} include/{target,trace/events/target.h} drivers/target/loopback/tcm_loop.c:29:#include <scsi/scsi.h> drivers/target/loopback/tcm_loop.c:31:#include <scsi/scsi_host.h> drivers/target/loopback/tcm_loop.c:32:#include <scsi/scsi_device.h> drivers/target/loopback/tcm_loop.c:33:#include <scsi/scsi_cmnd.h> drivers/target/target_core_pscsi.c:39:#include <scsi/scsi_device.h> drivers/target/target_core_pscsi.c:40:#include <scsi/scsi_host.h> drivers/xen/xen-scsiback.c:52:#include <scsi/scsi_host.h> /* SG_ALL */ Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-06-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+0
Conflicts: drivers/net/phy/amd-xgbe-phy.c drivers/net/wireless/iwlwifi/Kconfig include/net/mac80211.h iwlwifi/Kconfig and mac80211.h were both trivial overlapping changes. The drivers/net/phy/amd-xgbe-phy.c file got removed in 'net-next' and the bug fix that happened on the 'net' side is already integrated into the rest of the amd-xgbe driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-01target: Drop lun_sep_lock for se_lun->lun_se_dev RCU usageNicholas Bellinger1-2/+9
With se_port and t10_alua_tg_pt_gp_member being absored into se_lun, there is no need for an extra lock to protect se_lun->lun_se_dev assignment. This patch also converts backend drivers to use call_rcu() release to allow any se_device readers to complete. The call_rcu() instead of kfree_rcu() is required here because se_device is embedded into the backend driver specific structure. Also, convert se_lun->lun_stats to use atomic_long_t within the target_complete_ok_work() completion callback, and add FIXME for transport_lookup_tmr_lun() with se_lun->lun_ref. Finally, update sbp_update_unit_directory() special case usage with proper rcu_dereference_raw() and configfs symlink comment. Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Chris Boot <bootc@bootc.net> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-01target: consolidate backend attribute implementationsChristoph Hellwig1-37/+1
Provide a common sets of dev_attrib attributes for all devices using the generic SPC/SBC parsers, and a second one with the minimal required read-only attributes for passthrough devices. The later is only used by pscsi for now, but will be wired up for the full-passthrough TCMU use case as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-01target: simplify backend driver registrationChristoph Hellwig1-12/+4
Rewrite the backend driver registration based on what we did to the fabric drivers: introduce a read-only struct target_bakckend_ops that the driver registers, which is then instanciate as a struct target_backend by the core. This allows the ops vector to be smaller and allows us to mark it const. At the same time the registration function can set up the configfs attributes, avoiding the need to add additional boilerplate code for that to the drivers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-30target: fix DPO and FUA bit checksChristoph Hellwig1-3/+1
Drivers may override the WCE flag, in which case the DPOFUA flag in MODE SENSE might differ from the check used to reject invalid FUA bits in sbc_check_dpofua. Also now that we reject invalid FUA bits early there is no need to duplicate the same buggy check down in the fileio code. As the DPOFUA flag controls th support for FUA bits on read and write commands as well as DPO key off all the checks off a single helper, and deprecate the emulate_dpo and emulate_fua_read attributs. This fixes various failures in the libiscsi testsuite. Personally I'd prefer to also remove the emulate_fua_write attribute as there is no good reason to disable it, but I'll leave that for a separate discussion. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-30target/file: Remove fd_prot bounce bufferSagi Grimberg1-100/+28
The reason this bounce buffer exists is to allow code reuse between rd_mcp and fileio in DIF mode. But the fact is, that this bounce is really not needed at all, we can simply call sbc_dif_verify on cmd->t_prot_sg and use it for file IO. This also removes fd_do_prot_rw as fd_do_rw was generalised to receive file pointer, block size (8 bytes for DIF data) and total data length. (Fix apply breakage from commit c836777 - nab) Tested-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-30target: Merge sbc_verify_dif_read|writeSagi Grimberg1-4/+6
Instead of providing DIF verify routines for read/write that are almost identical and conditionally copy protection information, just let the caller do the right thing. Have a single sbc_dif_verify that handles an sgl (that does NOT copy any data) and a protection information copy routine used by rd_mcp and fileio backend. In the WRITE case, call sbc_dif_verify with cmd->t_prot_sg and then do the copy from it to local sgl (assuming the verify succeeded of course). In the READ case, call sbc_dif_verify with the local sgl and if it succeeds, copy it to t_prot_sg (or not if we are stripping it). (Fix apply breakage from commit c836777 - nab) Tested-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-30target: Use a PASSTHROUGH flag instead of transport_typesAndy Grover1-1/+0
It seems like we only care if a transport is passthrough or not. Convert transport_type to a flags field and replace TRANSPORT_PLUGIN_* with a flag, TRANSPORT_FLAG_PASSTHROUGH. Signed-off-by: Andy Grover <agrover@redhat.com> Reviewed-by: Ilias Tsitsimpis <iliastsi@arrikto.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-28treewide: Add missing vmalloc.h inclusion.David S. Miller1-0/+1
All of these files were only building on non-x86 because of the indirect of inclusion of vmalloc.h by, of all things, "net/inet_hashtables.h" None of this got caught during build testing, because on x86 there is an implicit vmalloc.h include via on of the arch asm/ headers. This fixes all of these Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-15target/file: Fix UNMAP with DIF protection supportAkinobu Mita1-25/+61
When UNMAP command is issued with DIF protection support enabled, the protection info for the unmapped region is remain unchanged. So READ command for the region causes data integrity failure. This fixes it by invalidating protection info for the unmapped region by filling with 0xff pattern. This change also adds helper function fd_do_prot_fill() in order to reduce code duplication with existing fd_format_prot(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-04-15target/file: Fix SG table for prot_buf initializationAkinobu Mita1-15/+6
In fd_do_prot_rw(), it allocates prot_buf which is used to copy from se_cmd->t_prot_sg by sbc_dif_copy_prot(). The SG table for prot_buf is also initialized by allocating 'se_cmd->t_prot_nents' entries of scatterlist and setting the data length of each entry to PAGE_SIZE at most. However if se_cmd->t_prot_sg contains a clustered entry (i.e. sg->length > PAGE_SIZE), the SG table for prot_buf can't be initialized correctly and sbc_dif_copy_prot() can't copy to prot_buf. (This actually happened with TCM loopback fabric module) As prot_buf is allocated by kzalloc() and it's physically contiguous, we only need a single scatterlist entry. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-04-15target/file: Fix BUG() when CONFIG_DEBUG_SG=y and DIF protection enabledAkinobu Mita1-7/+8
When CONFIG_DEBUG_SG=y and DIF protection support enabled, kernel BUG()s are triggered due to the following two issues: 1) prot_sg is not initialized by sg_init_table(). When CONFIG_DEBUG_SG=y, scatterlist helpers check sg entry has a correct magic value. 2) vmalloc'ed buffer is passed to sg_set_buf(). sg_set_buf() uses virt_to_page() to convert virtual address to struct page, but it doesn't work with vmalloc address. vmalloc_to_page() should be used instead. As prot_buf isn't usually too large, so fix it by allocating prot_buf by kmalloc instead of vmalloc. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-04-07target/file: Add checks for backend DIF emulationNicholas Bellinger1-4/+4
Make sure that FILEIO only attempts to use backend DIF emulation when it's actually enabled at device level. Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-03-26target: add missing sense_reason_t annotationsChristoph Hellwig1-1/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-02-27target: rewrite fd_execute_write_sameChristoph Hellwig1-78/+22
With the new bio_vec backed iov_iter helpers we can simply set up on bio_vec per LBA, all pointing to the same initiator-supplied buffer. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-02-27target: use vfs_iter_read/write in fd_do_rwChristoph Hellwig1-17/+14
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-02-21Merge branch 'for-next' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - Update vhost-scsi to support F_ANY_LAYOUT using mm/iov_iter.c logic, and signal VERSION_1 support (MST + Viro + nab) - Fix iscsi/iser-target to remove problematic active_ts_set usage (Gavin Guo) - Update iscsi/iser-target to support multi-sequence sendtargets (Sagi) - Fix original PR_APTPL_BUF_LEN 8k size limitation (Martin Svec) - Add missing WRITE_SAME end-of-device sanity check (Bart) - Check for LBA + sectors wrap-around in sbc_parse_cdb() (nab) - Other various minor SPC/SBC compliance fixes based upon Ronnie Sahlberg test suite (nab)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (32 commits) target: Set LBPWS10 bit in Logical Block Provisioning EVPD target: Fail UNMAP when emulate_tpu=0 target: Fail WRITE_SAME w/ UNMAP=1 when emulate_tpws=0 target: Add sanity checks for DPO/FUA bit usage target: Perform PROTECT sanity checks for WRITE_SAME target: Fail I/O with PROTECT bit when protection is unsupported target: Check for LBA + sectors wrap-around in sbc_parse_cdb target: Add missing WRITE_SAME end-of-device sanity check iscsi-target: Avoid IN_LOGOUT failure case for iser-target target: Fix PR_APTPL_BUF_LEN buffer size limitation iscsi-target: Drop problematic active_ts_list usage iscsi/iser-target: Support multi-sequence sendtargets text response iser-target: Remove duplicate function names vhost/scsi: potential memory corruption vhost/scsi: Global tcm_vhost -> vhost_scsi rename vhost/scsi: Drop left-over scsi_tcq.h include vhost/scsi: Set VIRTIO_F_ANY_LAYOUT + VIRTIO_F_VERSION_1 feature bits vhost/scsi: Add ANY_LAYOUT support in vhost_scsi_handle_vq vhost/scsi: Add ANY_LAYOUT iov -> sgl mapping prerequisites vhost/scsi: Change vhost_scsi_map_to_sgl to accept iov ptr + len ...
2015-02-14target: Perform PROTECT sanity checks for WRITE_SAMENicholas Bellinger1-0/+5
This patch adds a call to sbc_check_prot() within sbc_setup_write_same() code to perform the various protection releated sanity checks, including failing if WRPROTECT or RDPROTECT is set for a backend device that has not advertised support for T10-PI. Also, since WRITE_SAME + T10-PI is currently not supported by IBLOCK + FILEIO backends, go ahead and fail if ->execute_write_same() is invoked with a non zero cmd->prot_op. Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-01-09target: Drop left-over fabric_max_sectors attributeNicholas Bellinger1-1/+0
Now that fabric_max_sectors is no longer used to enforce the maximum I/O size, go ahead and drop it's left-over usage in target-core and associated backend drivers. Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-01-09target: Drop arbitrary maximum I/O size limitNicholas Bellinger1-1/+10
This patch drops the arbitrary maximum I/O size limit in sbc_parse_cdb(), which currently for fabric_max_sectors is hardcoded to 8192 (4 MB for 512 byte sector devices), and for hw_max_sectors is a backend driver dependent value. This limit is problematic because Linux initiators have only recently started to honor block limits MAXIMUM TRANSFER LENGTH, and other non-Linux based initiators (eg: MSFT Fibre Channel) can also generate I/Os larger than 4 MB in size. Currently when this happens, the following message will appear on the target resulting in I/Os being returned with non recoverable status: SCSI OP 28h with too big sectors 16384 exceeds fabric_max_sectors: 8192 Instead, drop both [fabric,hw]_max_sector checks in sbc_parse_cdb(), and convert the existing hw_max_sectors into a purely informational attribute used to represent the granuality that backend driver and/or subsystem code is splitting I/Os upon. Also, update FILEIO with an explicit FD_MAX_BYTES check in fd_execute_rw() to deal with the one special iovec limitiation case. v2 changes: - Drop hw_max_sectors check in sbc_parse_cdb() Reported-by: Lance Gropper <lance.gropper@qosserver.com> Reported-by: Stefan Priebe <s.priebe@profihost.ag> Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org # 3.4 Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-12-01target/file: Convert to external fileio_backend_dev_attrsNicholas Bellinger1-0/+42
This patch converts FILEIO to use an external set of device attributes, and utilizes target_core_backend_configfs.h macros to generate a default set of configfs extended-attr handlers. It calls target_core_setup_sub_cits() to setup the initial config_item_type based on existing target_core_configfs.c defaults, and using configfs_attribute generated by DEF_TB_DEFAULT_ATTRIBS(fileio) populates fileio_backend_dev_attrs[] It introduces no functional change for existing FILEIO device attributes. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-10-07target/file: fix inclusive vfs_fsync_range() endZach Brown1-2/+7
Both of the file target's calls to vfs_fsync_range() got the end offset off by one. The range is inclusive, not exclusive. It would sync a bit more data than was required. The sync path already tested the length of the range and fell back to LLONG_MAX so I copied that pattern in the rw path. This is untested. I found the errors by inspection while following other code. Signed-off-by: Zach Brown <zab@zabbo.net> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-09-17target: correctly handle match_int errors in FILEIO + PSCSIJoern Engel1-1/+3
This patch correctly handles match_int() errors in FILEIO + PSCSI backend parameter parsing, which can potentially fail due to a memory allocation failure or invalid argument. Found by coverity. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07Target/file: place escape values for protection information formatSagi Grimberg1-39/+1
No need to actually compute protection information when formatting Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-31Merge branch 'for-next' of ↵Linus Torvalds1-1/+255
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - add support for SCSI Referrals (Hannes) - add support for T10 DIF into target core (nab + mkp) - add support for T10 DIF emulation in FILEIO + RAMDISK backends (Sagi + nab) - add support for T10 DIF -> bio_integrity passthrough in IBLOCK backend (nab) - prep changes to iser-target for >= v3.15 T10 DIF support (Sagi) - add support for qla2xxx N_Port ID Virtualization - NPIV (Saurav + Quinn) - allow percpu_ida_alloc() to receive task state bitmask (Kent) - fix >= v3.12 iscsi-target session reset hung task regression (nab) - fix >= v3.13 percpu_ref se_lun->lun_ref_active race (nab) - fix a long-standing network portal creation race (Andy)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (51 commits) target: Fix percpu_ref_put race in transport_lun_remove_cmd target/iscsi: Fix network portal creation race target: Report bad sector in sense data for DIF errors iscsi-target: Convert gfp_t parameter to task state bitmask iscsi-target: Fix connection reset hang with percpu_ida_alloc percpu_ida: Make percpu_ida_alloc + callers accept task state bitmask iscsi-target: Pre-allocate more tags to avoid ack starvation qla2xxx: Configure NPIV fc_vport via tcm_qla2xxx_npiv_make_lport qla2xxx: Enhancements to enable NPIV support for QLOGIC ISPs with TCM/LIO. qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure IB/isert: pass scatterlist instead of cmd to fast_reg_mr routine IB/isert: Move fastreg descriptor creation to a function IB/isert: Avoid frwr notation, user fastreg IB/isert: seperate connection protection domains and dma MRs tcm_loop: Enable DIF/DIX modes in SCSI host LLD target/rd: Add DIF protection into rd_execute_rw target/rd: Add support for protection SGL setup + release target/rd: Refactor rd_build_device_space + rd_release_device_space target/file: Add DIF protection support to fd_execute_rw target/file: Add DIF protection init/format support ...
2014-01-19target/file: Add DIF protection support to fd_execute_rwNicholas Bellinger1-1/+118
This patch adds support for DIF protection into fd_execute_rw() code for WRITE/READ I/O using sbc_dif_verify_[write,read]() logic. It adds fd_do_prot_rw() for handling interface with FILEIO PI, and uses a locally allocated fd_prot->prot_buf + fd_prot->prot_sg for interacting with SBC DIF verify emulation code. Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-19target/file: Add DIF protection init/format supportNicholas Bellinger1-0/+137
This patch adds support for DIF protection init/format support into the FILEIO backend. It involves using a seperate $FILE.protection for storing PI that is opened via fd_init_prot() using the common pi_prot_type attribute. The actual formatting of the protection is done via fd_format_prot() using the common pi_prot_format attribute, that will populate the initial PI data based upon the currently configured pi_prot_type. Based on original FILEIO code from Sagi. v1 changes: - Fix sparse warnings in fd_init_format_buf (Fengguang) Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-19target/file: Update hw_max_sectors based on current block_sizeNicholas Bellinger1-4/+4
This patch allows FILEIO to update hw_max_sectors based on the current max_bytes_per_io. This is required because vfs_[writev,readv]() can accept a maximum of 2048 iovecs per call, so the enforced hw_max_sectors really needs to be calculated based on block_size. This addresses a >= v3.5 bug where block_size=512 was rejecting > 1M sized I/O requests, because FD_MAX_SECTORS was hardcoded to 2048 for the block_size=4096 case. (v2: Use max_bytes_per_io instead of ->update_hw_max_sectors) Reported-by: Henrik Goldman <hg@x-formation.com> Cc: <stable@vger.kernel.org> #3.5+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-20target core: rename (ex,im)plict -> (ex,im)plicitHannes Reinecke1-1/+1
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-10target: Update copyright ownership/year information to 2013Nicholas Bellinger1-1/+1
Update copyright ownership/year information for target-core, loopback, iscsi-target, tcm_qla2xx, vhost and iser-target. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Privacy Policy