aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/video
AgeCommit message (Collapse)AuthorFilesLines
2013-01-08Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+2
Pull ARM SoC fixes from Olof Johansson: "People are back from the holiday breaks, and it shows. Here are a bunch of fixes for a number of platforms: - A couple of small fixes for Nomadik - A larger set of changes for kirkwood/mvebu - uart driver selection, dt clocks, gpio-poweroff fixups, a few __init annotation fixes and some error handling improvement in their xor dma driver. - i.MX had a couple of minor fixes (and a critical one for flexcan2 clock setup) - MXS has a small board fix and a framebuffer bugfix - A set of fixes for Samsung Exynos, fixing default bootargs and some Exynos5440 clock issues - A set of OMAP changes including PM fixes and a few sparse warning fixups All in all a bit more positive code delta than we'd ideally want to see here, mostly from the OMAP PM changes, but nothing overly crazy." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits) ARM: clps711x: Fix bad merge of clockevents setup ARM: highbank: save and restore L2 cache and GIC on suspend ARM: highbank: add a power request clear ARM: highbank: fix secondary boot and hotplug ARM: highbank: fix typos with hignbank in power request functions ARM: dts: fix highbank cpu mpidr values ARM: dts: add device_type prop to cpu nodes on Calxeda platforms ARM: mx5: Fix MX53 flexcan2 clock ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array pinctrl: mvebu: make pdma clock on dove mandatory ARM: Dove: Add pinctrl clock to DT dma: mv_xor: fix error handling for clocks dma: mv_xor: fix error handling of mv_xor_channel_add() arm: mvebu: Add missing ; for cpu node. arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces arm: mvebu: Armada XP MV78230 has two cores, not one clk: mvebu: Remove inappropriate __init tagging ARM: Kirkwood: Use fixed-regulator instead of board gpio call ARM: Kirkwood: Fix missing sdio clock ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers ...
2013-01-04video: mxsfb: fix crash when unblanking the displayLothar Waßmann1-1/+2
The VDCTRL4 register does not provide the MXS SET/CLR/TOGGLE feature. The write in mxsfb_disable_controller() sets the data_cnt for the LCD DMA to 0 which obviously means the max. count for the LCD DMA and leads to overwriting arbitrary memory when the display is unblanked. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Juergen Beisert <jbe@pengutronix.de> Tested-by: Lauri Hintsala <lauri.hintsala@bluegiga.net> Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-03Drivers: video: remove __dev* attributes.Greg Kroah-Hartman135-1129/+1017
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-18backlight: locomolcd: fix checkpatch error and warningJingoo Han1-13/+25
This patch fixes the checkpatch error and warning as below: WARNING: space prohibited between function name and open parenthesis '(' ERROR: trailing statements should be on next line Also, long comments are fixed for the preferred style and unnecessary lines are removed. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18Merge branch 'next' of ↵Linus Torvalds2-5/+18
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc update from Benjamin Herrenschmidt: "The main highlight is probably some base POWER8 support. There's more to come such as transactional memory support but that will wait for the next one. Overall it's pretty quiet, or rather I've been pretty poor at picking things up from patchwork and reviewing them this time around and Kumar no better on the FSL side it seems..." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (73 commits) powerpc+of: Rename and fix OF reconfig notifier error inject module powerpc: mpc5200: Add a3m071 board support powerpc/512x: don't compile any platform DIU code if the DIU is not enabled powerpc/mpc52xx: use module_platform_driver macro powerpc+of: Export of_reconfig_notifier_[register,unregister] powerpc/dma/raidengine: add raidengine device powerpc/iommu/fsl: Add PAMU bypass enable register to ccsr_guts struct powerpc/mpc85xx: Change spin table to cached memory powerpc/fsl-pci: Add PCI controller ATMU PM support powerpc/86xx: fsl_pcibios_fixup_bus requires CONFIG_PCI drivers/virt: the Freescale hypervisor driver doesn't need to check MSR[GS] powerpc/85xx: p1022ds: Use NULL instead of 0 for pointers powerpc: Disable relocation on exceptions when kexecing powerpc: Enable relocation on during exceptions at boot powerpc: Move get_longbusy_msecs into hvcall.h and remove duplicate function powerpc: Add wrappers to enable/disable relocation on exceptions powerpc: Add set_mode hcall powerpc: Setup relocation on exceptions for bare metal systems powerpc: Move initial mfspr LPCR out of __init_LPCR powerpc: Add relocation on exception vector handlers ...
2012-12-17backlight: corgi_lcd: Use gpio_set_value_cansleep() to avoid WARN_ONMarko Katic1-2/+2
Changing backlight intensity on an Akita (Sharp Zaurus C-1000) triggers WARN_ON message: WARNING: at drivers/gpio/gpiolib.c:1672 __gpio_set_value+0x38/0xa4() Modules linked in: Backtrace: corgi_bl_set_intensity+0x0/0x74 corgi_bl_update_status+0x0/0x64 corgi_lcd_probe+0x0/0x258 spi_drv_probe+0x0/0x24 driver_probe_device+0x0/0x208 __driver_attach+0x0/0x94 bus_for_each_dev+0x0/0x90 driver_attach+0x0/0x28 bus_add_driver+0x0/0x22c driver_register+0x0/0x134 spi_register_driver+0x0/0x60 corgi_lcd_driver_init+0x0/0x1c do_one_initcall+0x0/0x174 kernel_init+0x0/0x2a8 Akita machines have backlight controls hooked to a gpio expander chip, max7310 using i2c transfers which can sleep. In this case, pca953x_gpio_set_value() can be called to control gpio, and pca953x_setup_gpio() sets can_sleep flag. Therefore, gpio_set_value_cansleep() should be used in order to avoid WARN_ON on akita machines. Akita is the only exception in this case since other users of corgi_lcd access backlight gpio controls through a different gpio expander which does not set the can_sleep flag. Signed-off-by: Marko Katic <dromede@gmail.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17drivers/video/backlight/lms283gf05.c: use GPIOF_INIT flags when using ↵Jingoo Han1-1/+2
devm_gpio_request_one() GPIOF_DIR_OUT and GPIOF_DIR_IN are defined as below: GPIOF_DIR_OUT (0 << 0) GPIOF_DIR_IN (1 << 0) So, when !pdata->reset_inverted is 1, the gpio pin can be set as input, instead of output. To prevent this problem, GPIOF_INIT flag should be used when using devm_gpio_request_one(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17drivers/video/backlight/lcd.c: return ENXIO when ops functions cannot be calledJingoo Han1-2/+6
Previously, when ops functions cannot be called, lcd_show_contrast() and lcd_store_contrast() returned 0, instead of ENXIO. Thus, in this case, a local variable 'rc' for return value should be initialized as ENXIO, after kstrtoul() is called. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17backlight: 88pm860x_bl: remove an unnecessary line continuationJingoo Han1-2/+1
Remove an unnecessary line continuation in pm860x_backlight_probe(). Also, a checkpatch warning is fixed as below: WARNING: Avoid unnecessary line continuations [akpm@linux-foundation.org: remove newline] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17drivers/video/backlight/pandora_bl.c: change TWL4030_MODULE_PWM0 to ↵Peter Ujfalusi1-5/+3
TWL_MODULE_PWM TWL_MODULE_PWM is defined as: #define TWL_MODULE_PWM TWL4030_MODULE_PWM0 Use the common module ID define here which will facilitate the upcoming twl-core cleanup. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17backlight: add of_find_backlight_by_node()Thierry Reding1-0/+29
This function finds the struct backlight_device for a given device tree node. A dummy function is provided so that it safely compiles out if OF support is disabled. [akpm@linux-foundation.org: Don't use IS_ENABLED(CONFIG_OF)] Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Cc: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17drivers/video/backlight/lm3639_bl.c: fix up world writable sysfs fileAxel Lin1-1/+1
We don't need the sysfs file to be world writable or group writable. This file is write-only, change it to S_IWUSR (0200). Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: "G.Shark Jeong" <gshark.jeong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17drivers/video/backlight/max8925_bl.c: drop devm_kfree of devm_kzalloc'd dataJingoo Han1-8/+3
devm_kfree() allocates memory that is released when a driver detaches. Thus, there is no reason to explicitly call devm_kfree in probe or remove functions. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17drivers/video/backlight/88pm860x_bl.c: drop devm_kfree of devm_kzalloc'd dataJingoo Han1-8/+3
devm_kfree() allocates memory that is released when a driver detaches. Thus, there is no reason to explicitly call devm_kfree() in probe or remove functions. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17drivers/video/backlight/s6e63m0.c: remove unnecessary cast of void pointerJingoo Han1-1/+1
Remove unnecessary cast of void pointer for platform data in probe function. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17drivers/video/backlight/vgg2432a4.c: add missing constJingoo Han3-6/+6
Add 'const' to static array that was missing it in its definition. Also, 'const' is added to ili9320_write_regs(), because it is called by vgg2432a4 driver. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17drivers/video/backlight/tdo24m.c: add missing constJingoo Han1-13/+14
Add 'const' to static array that was missing it in its definition. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17drivers/video/backlight/lms283gf05.c: add missing constJingoo Han1-3/+3
Add 'const' to static array that was missing it in its definition. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Marek Vasut <marex@denx.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17drivers/video/backlight/da9052_bl.c: add missing constJingoo Han1-1/+1
Add 'const' to static array that was missing it in its definition. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Ashish Jangam <ashish.jangam@kpitcummins.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17drivers/video/backlight/lp855x_bl.c: remove unnecessary mutex codeKim, Milo1-13/+1
The mutex for accessing lp855x registers is used in case of the user-space interaction. When the brightness is changed via sysfs, the mutex is required. But the backlight class device already provides it. Thus, the lp855x mutex is unnecessary. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Thierry Reding <thierry.reding@avionic-design.de> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17drivers/video/backlight/lp855x_bl.c: use generic PWM functionsKim, Milo1-11/+26
The LP855x family devices support the PWM input for the backlight control. Period of the PWM is configurable in the platform side. Platform specific functions are unnecessary anymore because generic PWM functions are used inside the driver. (PWM input mode) To set the brightness, new lp855x_pwm_ctrl() is used. If a PWM device is not allocated, devm_pwm_get() is called. The PWM consumer name is from the chip name such as 'lp8550' and 'lp8556'. To get the brightness value, no additional handling is required. Just the value of 'props.brightness' is returned. If the PWM driver is not ready while initializing the LP855x driver, it's OK. The PWM device can be retrieved later, when the brightness value is changed. Documentation is updated with an example. [akpm@linux-foundation.org: coding-style simplification, per Thierry] Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Thierry Reding <thierry.reding@avionic-design.de> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17backlight: tosa: use devm_gpio_request_oneJingoo Han2-10/+4
By using devm_gpio_request_one it is possible to set the direction and initial value in one shot. Thus, using devm_gpio_request_one can make the code simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17backlight: lms283gf05: use devm_gpio_request_oneJingoo Han1-7/+3
By using devm_gpio_request_one it is possible to set the direction and initial value in one shot. Thus, using devm_gpio_request_one can make the code simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17backlight: vgg2432a4: fix checkpatch warningJingoo Han1-1/+1
This patch fixes the checkpatch warning as below: WARNING: please, no space before tabs Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17backlight: tosa: fix checkpatch error and warningJingoo Han2-8/+9
This patch fixes the checkpatch error and warning as below: ERROR: spaces required around that '?' (ctx:VxW) ERROR: space required after that ',' (ctx:VxV) Also, unnecessary lines are removed. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17backlight: tdo24m: fix checkpatch warningJingoo Han1-3/+3
This patch fixes the checkpatch warning as below: WARNING: please, no space before tabs Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17backlight: platform_lcd: fix checkpatch errorJingoo Han1-1/+1
This patch fixes the checkpatch error as below: ERROR: spaces prohibited around that ':' (ctx:WxW) Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17backlight: pcf50633: fix checkpatch warningJingoo Han1-3/+5
This patch fixes the checkpatch warning as below: WARNING: please, no spaces at the start of a line Also, long comments are fixed for the preferred style. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17backlight: omap1: fix checkpatch warningJingoo Han1-2/+2
This patch fixes the checkpatch warning as below: ERROR: inline keyword should sit between storage class and type Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17backlight: lm3630: fix checkpatch warningJingoo Han1-1/+1
This patch fixes the checkpatch warning as below: WARNING: static const char * array should probably be static const char * const Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17backlight: l4f00242t03: fix checkpatch warningJingoo Han1-2/+1
This patch fixes the checkpatch warning as below: WARNING: please, no space before tabs Also, unnecessary line is removed. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17backlight: jornada720: fix checkpatch error and warningJingoo Han1-12/+19
This patch fixes the checkpatch error and warning as below: ERROR: return is not a function, parentheses are not required Also, long comments are fixed for the preferred style. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17backlight: ili9320: fix checkpatch error and warningJingoo Han1-10/+2
This patch fixes the checkpatch error and warning as below: WARNING: please, no space before tabs WARNING: please, no spaces at the start of a line WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable WARNING: braces {} are not necessary for single statement blocks ERROR: code indent should use tabs where possible Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17backlight: hp680_bl: fix checkpatch error and warningJingoo Han1-2/+2
This patch fixes the checkpatch error and warning as below: WARNING: please, no space before tabs WARNING: please, no spaces at the start of a line ERROR: do not initialise statics to 0 or NULL ERROR: code indent should use tabs where possible Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17backlight: generic_bl: fix checkpatch warningJingoo Han1-2/+2
This patch fixes the checkpatch warning as below: WARNING: space prohibited between function name and open parenthesis '(' Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17backlight: da903x_bl: fix checkpatch warningJingoo Han1-4/+4
This patch fixes the checkpatch warning as below: WARNING: please, no space before tabs WARNING: quoted string split across lines Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17backlight: corgi_lcd: fix checkpatch error and warningJingoo Han1-7/+9
This patch fixes the checkpatch error and warning as below: WARNING: please, no space before tabs WARNING: quoted string split across lines ERROR: space required before the open parenthesis '(' Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17backlight: atmel-pwm-bl: fix checkpatch warningJingoo Han1-4/+3
This patch fixes the checkpatch warning as below: WARNING: quoted string split across lines Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17backlight: 88pm860x_bl: fix checkpatch warningJingoo Han1-2/+2
This patch fixes the checkpatch warning as below: WARNING: quoted string split across lines Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17backlight: da903x_bl: use dev_get_drvdata() instead of platform_get_drvdata()Jingoo Han1-4/+3
dev_get_drvdata() can be used instead of platform_get_drvdata() to make the code smaller. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18Merge remote-tracking branch 'agust/next' into nextBenjamin Herrenschmidt5-12/+30
Brings some 52xx updates. Also manually merged tools/perf/perf.h. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-16ARM: OMAP: Fix drivers to depend on omap for internal devicesTony Lindgren1-0/+4
These devices are not available on other architectures, so let's limit them to omap. If the driver subsystem maintainers want to build test system wide changes without building for each target, it's easy to carry a test patch that just strips out the depends entries from Kconfig files. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-15Merge tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds58-3376/+3561
Pull fbdev changes from Tomi Valkeinen: "OMAPDSS changes, including: - use dynanic debug prints - OMAP platform dependency removals - Creation of compat-layer, helping us to improve omapdrm - Misc cleanups, aiming to make omadss more in line with the upcoming common display framework Exynos DP changes for the 3.8 merge window: - Device Tree support for Samsung Exynos DP - SW Link training is cleaned up. - HPD interrupt is supported. Samsung Framebuffer changes for the 3.8 merge window: - The bit definitions of header file are updated. - Some minor typos are fixed. - Some minor bugs of s3c_fb_check_var() are fixed. FB related changes for SH Mobile, Freescale DIU Add support for the Solomon SSD1307 OLED Controller" * tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linux: (191 commits) OMAPDSS: fix TV-out issue with DSI PLL Revert "OMAPFB: simplify locking" OMAPFB: remove silly loop in fb2display() OMAPFB: fix error handling in omapfb_find_best_mode() OMAPFB: use devm_kzalloc to allocate omapfb2_device OMAPDSS: DISPC: remove dispc fck uses OMAPDSS: DISPC: get dss clock rate from dss driver drivers/video/console/softcursor.c: remove redundant NULL check before kfree() drivers/video: add support for the Solomon SSD1307 OLED Controller OMAPDSS: use omapdss_compat_init() in other drivers OMAPDSS: export dispc functions OMAPDSS: export dss_feat functions OMAPDSS: export dss_mgr_ops functions OMAPDSS: separate compat files in the Makefile OMAPDSS: move display sysfs init to compat layer OMAPDSS: DPI: use dispc's check_timings OMAPDSS: DISPC: add dispc_ovl_check() OMAPDSS: move irq handling to dispc-compat OMAPDSS: move omap_dispc_wait_for_irq_interruptible_timeout to dispc-compat.c OMAPDSS: move blocking mgr enable/disable to compat layer ... Conflicts: arch/arm/mach-davinci/devices-da8xx.c arch/arm/plat-omap/common.c drivers/media/platform/omap/omap_vout.c
2012-12-14Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-2/+9
Pull MIPS updates from Ralf Baechle: "The MIPS bits for 3.8. This also includes a bunch fixes that were sitting in the linux-mips.org git tree for a long time. This pull request contains updates to several OCTEON drivers and the board support code for BCM47XX, BCM63XX, XLP, XLR, XLS, lantiq, Loongson1B, updates to the SSB bus support, MIPS kexec code and adds support for kdump. When pulling this, there are two expected merge conflicts in include/linux/bcma/bcma_driver_chipcommon.h which are trivial to resolve, just remove the conflict markers and keep both alternatives." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (90 commits) MIPS: PMC-Sierra Yosemite: Remove support. VIDEO: Newport Fix console crashes MIPS: wrppmc: Fix build of PCI code. MIPS: IP22/IP28: Fix build of EISA code. MIPS: RB532: Fix build of prom code. MIPS: PowerTV: Fix build. MIPS: IP27: Correct fucked grammar in ops-bridge.c MIPS: Highmem: Fix build error if CONFIG_DEBUG_HIGHMEM is disabled MIPS: Fix potencial corruption MIPS: Fix for warning from FPU emulation code MIPS: Handle COP3 Unusable exception as COP1X for FP emulation MIPS: Fix poweroff failure when HOTPLUG_CPU configured. MIPS: MT: Fix build with CONFIG_UIDGID_STRICT_TYPE_CHECKS=y MIPS: Remove unused smvp.h MIPS/EDAC: Improve OCTEON EDAC support. MIPS: OCTEON: Add definitions for OCTEON memory contoller registers. MIPS: OCTEON: Add OCTEON family definitions to octeon-model.h ata: pata_octeon_cf: Use correct byte order for DMA in when built little-endian. MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree. MIPS: Remove usage of CEVT_R4K_LIB config option. ...
2012-12-13Merge tag 'pm-merge' of ↵Linus Torvalds3-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC power management and clock changes from Olof Johansson: "This branch contains a largeish set of updates of power management and clock setup. The bulk of it is for OMAP/AM33xx platforms, but also a few around hotplug/suspend/resume on Exynos. It includes a split-up of some of the OMAP clock data into separate files which adds to the diffstat, but gross delta is fairly reasonable." * tag 'pm-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits) ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h ASoC: OMAP: mcbsp fixes for enabling ARM multiplatform support watchdog: OMAP: fixup for ARM multiplatform support ARM: EXYNOS: Add flush_cache_all in suspend finisher ARM: EXYNOS: Remove scu_enable from cpuidle ARM: EXYNOS: Fix soft reboot hang after suspend/resume ARM: EXYNOS: Add support for rtc wakeup ARM: EXYNOS: fix the hotplug for Cortex-A15 ARM: OMAP2+: omap_device: Correct resource handling for DT boot ARM: OMAP2+: hwmod: Add possibility to count hwmod resources based on type ARM: OMAP2+: hwmod: Add support for per hwmod/module context lost count ARM: OMAP2+: PRM: initialize some PRM functions early ARM: OMAP2+: voltage: fixup oscillator handling when CONFIG_PM=n ARM: OMAP4: USB: power down MUSB PHY during boot ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP2xxx: clock: drop obsolete clock data ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP3+: DPLL: drop !CONFIG_COMMON_CLK sections ARM: AM33xx: clock: drop obsolete clock data ARM: OMAP3xxx: clk: drop obsolete clock data ...
2012-12-13VIDEO: Newport Fix console crashesThomas Bogendoerfer1-2/+9
Because of commit e84de0c61905030a0fe66b7210b6f1bb7c3e1eab [MIPS: GIO bus support for SGI IP22/28] newport con is now taking over console from dummy con, therefore it's necessary to resize the VC to the correct size to avoid crashes and garbage on console Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@linux-mips.org Cc: linux-fbdev@vger.kernel.org Cc: FlorianSchandinat@gmx.de Patchwork: https://patchwork.linux-mips.org/patch/4138/ Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-13Merge tag 'omapdss-for-3.8' of git://gitorious.org/linux-omap-dss2/linux ↵Tomi Valkeinen45-2894/+2587
into for-linus OMAPDSS changes for 3.8, including: - use dynanic debug prints - OMAP platform dependency removals - Creation of compat-layer, helping us to improve omapdrm - Misc cleanups, aiming to make omadss more in line with the upcoming common display framework * tag 'omapdss-for-3.8' of git://gitorious.org/linux-omap-dss2/linux: (140 commits) OMAPDSS: fix TV-out issue with DSI PLL Revert "OMAPFB: simplify locking" OMAPFB: remove silly loop in fb2display() OMAPFB: fix error handling in omapfb_find_best_mode() OMAPFB: use devm_kzalloc to allocate omapfb2_device OMAPDSS: DISPC: remove dispc fck uses OMAPDSS: DISPC: get dss clock rate from dss driver OMAPDSS: use omapdss_compat_init() in other drivers OMAPDSS: export dispc functions OMAPDSS: export dss_feat functions OMAPDSS: export dss_mgr_ops functions OMAPDSS: separate compat files in the Makefile OMAPDSS: move display sysfs init to compat layer OMAPDSS: DPI: use dispc's check_timings OMAPDSS: DISPC: add dispc_ovl_check() OMAPDSS: move irq handling to dispc-compat OMAPDSS: move omap_dispc_wait_for_irq_interruptible_timeout to dispc-compat.c OMAPDSS: move blocking mgr enable/disable to compat layer OMAPDSS: manage framedone irq with mgr ops OMAPDSS: add manager ops ...
2012-12-13OMAPDSS: fix TV-out issue with DSI PLLTomi Valkeinen1-0/+16
Commit 0e8276ef75f5c7811b038d1d23b2b42c16efc5ac (OMAPDSS: DPI: always use DSI PLL if available) made dpi.c use DSI PLL for its clock. This works fine, for DPI, but has a nasty side effect on OMAP3: On OMAP3 the same clock is used for DISPC fclk and LCD output. Thus, after the above patch, DSI PLL is used for DISPC and LCD output. If TV-out is used, the TV-out needs DISPC. And if DPI is turned off, the DSI PLL is also turned off, disabling DISPC. For this to work, we'd need proper DSS internal clock handling, with refcounts, which is a non-trivial project. This patch fixes the issue for now by disabling the use of DSI PLL for DPI on OMAP3. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-13Revert "OMAPFB: simplify locking"Tomi Valkeinen4-79/+132
This reverts commit b41deecbda70067b26a3a7704fdf967a7940935b. The simpler locking causes huge latencies when two processes use the omapfb, even if they use different framebuffers. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-13OMAPFB: remove silly loop in fb2display()Tomi Valkeinen1-6/+6
fb2display() has a for loop which always returns at the first iteration. Replace the loop with a simple if. This removes the smatch warning: drivers/video/omap2/omapfb/omapfb.h:153 fb2display() info: loop could be replaced with if statement. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Privacy Policy