aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2015-11-19smsir.h: remove a now duplicated definition (IR_DEFAULT_TIMEOUT)Mauro Carvalho Chehab1-2/+0
This macro is now part of the core. Remove from Siano driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] media: rc: move check whether a protocol is enabled to the coreHeiner Kallweit10-31/+3
Checking whether a protocol is enabled and calling the related decoder functions should be done by the rc core, not the protocol handlers. Properly handle lirc considering that no protocol bit is set for lirc. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] media: rc: load decoder modules on-demandHeiner Kallweit2-74/+0
Remove code for unconditional decoder module loading (except lirc). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] media: rc: constify struct proto_namesHeiner Kallweit1-2/+2
Declare struct proto_names and its member name as const. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] media: rc: preparation for on-demand decoder module loadingHeiner Kallweit1-13/+59
Prepare on-demand decoder module loading by adding a module_name member to struct proto_names and introducing the related load function. After this patch of the series the decoder modules are still loaded unconditionally. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] media: rc: fix decoder module unloadingHeiner Kallweit1-3/+14
Currently, if a decoder module is unloadad, the respective protocol is still shown as enabled (if it was enabled before). Fix this by resetting the respective protocol bits if a decoder module is unloaded. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] usbvision: fix crash on detecting device with invalid configurationVladis Dronov1-1/+15
The usbvision driver crashes when a specially crafted usb device with invalid number of interfaces or endpoints is detected. This fix adds checks that the device has proper configuration expected by the driver. Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] Add support for dvb usb stick Hauppauge WinTV-soloHDArno Bauernöppel2-0/+3
This patch adds support for the DVB-T/C/T2 usb stick WinTV-soloHD from Hauppauge. It adds the usb ID 2040:0264 Hauppauge to the cards of the driver em28xx. I successfully tested DVB-T/C and the IR remote control with the firmware dvb-demod-si2168-b40-01.fw. Signed-off-by: Arno Bauernoeppel <arno@aziraphale.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] lirc_imon: do not leave imon_probe() with mutex heldAlexey Khoroshilov1-0/+2
Commit af8a819a2513 ("[media] lirc_imon: simplify error handling code") lost mutex_unlock(&context->ctx_lock), so imon_probe() exits with the context->ctx_lock mutex acquired. The patch adds mutex_unlock(&context->ctx_lock) back. Found by Linux Driver Verification project (linuxtesting.org). Fixes: af8a819a2513 ("[media] lirc_imon: simplify error handling code") Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] si2165: fix checkpatch issuesMatthias Schwarzott1-30/+39
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] cx231xx_dvb: use demod_i2c for demod attachMatthias Schwarzott2-8/+8
Tested: * CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx * CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx Not Tested: * CX231XX_BOARD_HAUPPAUGE_EXETER * CX231XX_BOARD_HAUPPAUGE_955Q Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] ttusb-dec: constify ttusbdecfe_config structureJulia Lawall1-1/+1
The ttusbdecfe_config structure is never modified, so declare it as const. Other references to this structure type were already declared as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] drivers/media/usb/dvb-usb-v2: constify mxl111sf_demod_config structureJulia Lawall3-5/+5
The mxl111sf_demod_config structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] tv tuner max2165 driver: extend frequency rangeWalter Cheuk1-1/+1
Extend the frequency range to cover Hong Kong's digital TV broadcasting; RTHK TV uses 802MHz and is not covered now. Tested on my TV tuner card "MyGica X8558 Pro". Signed-off-by: Walter Cheuk <wwycheuk@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] v4l: omap_vout: Don't free buffers if they haven't been allocatedLaurent Pinchart1-4/+6
The VRFB buffers are freed when the device is closed even if they haven't been allocated by a call to VIDIOC_REQBUFS, resulting in a crash. Fix it by not trying to free buffers that are not allocated. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] media: omap4iss: Make module stop timeout print a warning messageLaurent Pinchart1-2/+2
Module stop timeouts are serious enough that they deserve a proper warning message, not a debug message that will go unnoticed. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] media: omap4iss: csi2: Fix IRQ handling when stopping moduleLaurent Pinchart1-3/+3
When stopping the CSI2 receiver the s_stream handler will wait for the IRQ handler to notice the stop request. The receiver, automatically disabled by the hardware after each frame, is then not reenabled by the IRQ handler as it returns immediately. As the IRQ handler check is performed before handling the context IRQ, the context IRQ source isn't cleared, and the CSI2 IRQ is then fired again immediately. The IRQ handler then fails to notice that the module is being stopped, processes the IRQ normally and reenables the CSI2 hardware. The problem goes unnoticed at stream stop time, but depending on the IRQ and s_stream scheduling timings, the CSI2 receiver can end up being hanged and will not produce any interrupt the next time it gets enabled, despite being soft-reset then. Fix this by checking for module stop after clearing the context IRQ source. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] omap4iss: Fix overlapping luma/chroma planesNate Weibley1-2/+2
The chroma data base address for NV12 formatted data should begin offset rows*bytes_per_row from the base address for luminance data. We were OBO causing a stripe of green pixels at the bottom of the frame. Signed-off-by: Nate Weibley <nweibley@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] uvcvideo: Enable UVC 1.5 device detectionLaurent Pinchart1-1/+2
UVC 1.5 devices report a bInterfaceProtocol value set to 1 in their interface descriptors. The uvcvideo driver only matches on bInterfaceProtocol 0, preventing those devices from being detected. More changes to the driver are needed for full UVC 1.5 compatibility. However, at least the UVC 1.5 Microsoft Surface Pro 3 cameras have been reported to work out of the box with the driver with an updated match table. Enable UVC 1.5 support in the match table to support the devices that can work with the current driver implementation. Devices that can't will fail, but that's hardly a regression as they're currently not detected at all anyway. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] c8sectpfe: Combine three checks into a single if blockMarkus Elfring1-8/+9
The variable "tsin" was checked three times in a loop iteration of the c8sectpfe_tuner_unregister_frontend() function. This implementation detail could be improved by the combination of the involved statements into a single if block so that this variable will be checked only once there. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] c8sectpfe: Delete unnecessary checks before two function callsMarkus Elfring1-3/+2
The functions i2c_put_adapter() and module_put() test whether their argument is NULL and then return immediately. Thus the tests around their calls are not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] media: rc-core: simplify logging in rc_register_deviceHeiner Kallweit1-4/+2
Simplify the logging. I had some doubts about using the elvis operator as it's GNU extension. However GNU extensions are explicitely allowed and this operator is used at several places in the kernel code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] media: rc: nuvoton-cir: replace nvt_pr with dev_ functionsHeiner Kallweit2-10/+8
Replace nvt_pr with the respective dev_ functions thus slightly simplifying the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] media: rc: nuvoton-cir: switch chip detection message to info levelHeiner Kallweit1-2/+3
Switch the info about the detected chip type from debug to info level as it might be useful not only for debugging purposes. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] media: rc: nuvoton-cir: simplify debug codeHeiner Kallweit1-3/+2
Instead of explicitely checking debug use nvt_dbg like in other parts of the driver thus simplifying the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] media: rc: nuvoton-cir: add support for the NCT6779DHeiner Kallweit2-1/+3
Add support for the NCT6779D. It's found e.g. on the Zotac CI321 mini-pc and I successfully tested it on this device. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] media: rc: nuvoton-cir: make nvt_hw_detect voidHeiner Kallweit1-6/+2
nvt_hw_detect always returns 0, therefore make it return void. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] media: rc: nuvoton-cir: improve chip detectionHeiner Kallweit2-49/+56
Make the chip detection code more similar to the one used for the same chips in watchdog/w83627hf_wdt.c and hwmon/w83627ehf.c. Apart from better maintainability we gain - unified naming of chips (e.g. 677C -> NCT6776F) - driver works with all revisions of the chips (least 4 bits of id are masked) Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] media: rc: nuvoton-cir: switch resource handling to devm functionsHeiner Kallweit1-25/+11
Switch to managed resource handling using the devm_ functions. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] media: rc: nuvoton-cir: remove unneeded lockHeiner Kallweit1-3/+0
chip_major / chip_minor are accessed sequentially in probe only. Therefore no lock is needed. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] media: rc: nuvoton-cir: remove unneeded IRQ_RETVAL usageHeiner Kallweit1-6/+6
Using IRQ_RETVAL is unneeded here. IRQ_NONE / IRQ_HANDLED can be returned directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] media: rc: ir-sharp-decoder: add support for Denon variant of the ↵Heiner Kallweit2-2/+5
protocol Denon also uses the Sharp protocol, however with different check bits. It would have been also possible to add this as a separate protocol but this may not be worth the effort. Successfully tested with a Denon RC-1002 remote control. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] rc-core: Remove 'struct timeval' usageTina Ruchandani1-10/+9
streamzap uses 'struct timeval' to store the start time of a signal for gap tracking. struct timeval uses a 32-bit seconds representation which will overflow in year 2038 and beyond. Replace struct timeval with ktime_t which uses a 64-bit seconds representation and is 2038 safe. This patch uses ktime_get_real() preserving the use of wall-clock time in the original code. Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] em28xx: add Terratec Cinergy T XS (MT2060)Alberto Mardegan2-2/+21
The Terratec Cinergy T XS is a DVB-T receiver with no analog TV tuner. This patch adds support for the cards carrying the mt2060 tuner; it's unclear whether there are cards sold under the same name which use a different tuner. As long as there are no reports of such cards, and indeed as long as there are no working drivers for them, we assume that the USB device [0ccd:0043] is carrying the mt2060 tuner. Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] v4l: xilinx-vipp: add missing of_node_putJulia Lawall1-1/+3
for_each_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; @@ for_each_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | + of_node_put(child); ? return ...; ) ... } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] v4l: xilinx-tpg: add missing of_node_putJulia Lawall1-0/+2
for_each_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; @@ for_each_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | + of_node_put(child); ? return ...; ) ... } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] as102: fix potential double free in as102_fw_upload()Christian Engelmayer1-0/+1
In case the request to locate the firmware file part 2 fails, the error path releases the already freed firmware memory location again. Thus reset the firmware pointer to NULL after releasing firmware file part 1. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] rc: allow rc modules to be loaded if rc-main is not a moduleRussell King1-1/+1
rc-main mistakenly uses #ifdef MODULE to determine whether it should load the rc keymap modules. This symbol is only defined if rc-main is being built as a module itself, and bears no relation to whether the rc keymaps are modules. Fix this to use CONFIG_MODULES instead. Fixes: 631493ecacd8 ("[media] rc-core: merge rc-map.c into rc-main.c") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] si2157: return -EINVAL if firmware blob is too bigLaura Abbott1-0/+1
A previous patch added a check if the firmware is too big, but it didn't set the return error code with the right value. [mchehab@osg.samsung.com: I ended by applying a v1 of Laura's patch, without the proper return code. This patch contains the difference between v2 and v1 of the Laura's "si2157: Bounds check firmware" patch] Cc: stable@kernel.org Signed-off-by: Laura Abbott <labbott@fedoraproject.org> Reviewed-by: Olli Salonen <olli.salonen@iki.fi> Tested-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] staging: omap4iss: Compiling V4L2 framework and I2C as modules is fineSakari Ailus1-1/+1
Don't require V4L2 framework and I2C being linked to the kernel directly. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] mxl111sf: missing return values validationInsu Yun1-2/+2
Return values of mxl111sf_enable_usb_output and mxl1x1sf_top_master_ctrl are not validated. Signed-off-by: Insu Yun <wuninsu@gmail.com> Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] rcar_vin: Remove obsolete platform data supportGeert Uytterhoeven1-46/+29
Since commit 3d7608e4c169af03 ("ARM: shmobile: bockw: remove legacy board file and config"), Renesas R-Car SoCs are only supported in generic DT-only ARM multi-platform builds. The driver doesn't need to use platform data anymore, hence remove platform data configuration. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] move media platform data to linux/platform_data/mediaMauro Carvalho Chehab5-5/+5
Now that media has its own subdirectory inside platform_data, let's move the headers that are already there to such subdir. After moving those files, the references were adjusted using this script: MAIN_DIR="linux/platform_data/" PREV_DIR="linux/platform_data/" DIRS="media/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Suggested-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] V4L2: platform: rcar_jpu: switch off clock on release laterMikhail Ulyanov1-5/+5
Give JPU peripheral chance to finish current job. Don't switch off clock until context release. Signed-off-by: Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] V4L2: platform: rcar_jpu: remove redundant codeMikhail Ulyanov1-3/+0
Remove redundant code. Following code line do what we want. [mchehab@osg.samsung.com: fix conflict with VB2 split patches that renamed some structs] Signed-off-by: Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] rc: gpio-ir-recv: add timeout on idleEric Nelson1-0/+22
Many decoders require a trailing space (period without IR illumination) to be delivered before completing a decode. Since the gpio-ir-recv driver only delivers events on gpio transitions, a single IR symbol (caused by a quick touch on an IR remote) will not be properly decoded without the use of a timer to flush the tail end state of the IR receiver. This patch initializes and uses a timer and the timeout field of rcdev to complete the stream and allow decode. The timeout can be overridden through the use of the LIRC_SET_REC_TIMEOUT ioctl. Signed-off-by: Eric Nelson <eric@nelint.com> Acked-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] media: st-rc: remove misuse of IRQF_NO_SUSPEND flagSudeep Holla1-5/+9
The device is set as wakeup capable using proper wakeup API but the driver misuses IRQF_NO_SUSPEND to set the interrupt as wakeup source which is incorrect. This patch removes the use of IRQF_NO_SUSPEND flags replacing it with enable_irq_wake instead. Cc: Srinivas Kandagatla <srinivas.kandagatla@gmail.com> Cc: Maxime Coquelin <maxime.coquelin@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: linux-arm-kernel@lists.infradead.org Cc: kernel@stlinux.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-18[media] s5c73m3-spi: fix compilation breakage when compiled as ModuleMauro Carvalho Chehab1-1/+1
commit f934a94bb566a629b7e0be52d087a686145d1f14 ('s5c73m3: Export OF module alias information') broke compilation when compiled as module: In file included from drivers/media/i2c/s5c73m3/s5c73m3-spi.c:22:0: drivers/media/i2c/s5c73m3/s5c73m3-spi.c:40:40: error: expected ')' before ';' token MODULE_DEVICE_TABLE(of, s5c73m3_spi_ids;); ^ Fix it by removing the extra ';' Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-18[media] c8sectpfe: Update binding to reset-gpiosPeter Griffin1-1/+1
reset-gpios is more clear than rst-gpio. This change has been done as one atomic commit but it does breaks compatability with older dtbs. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-18[media] media: dvb-core: Don't force CAN_INVERSION_AUTO in oneshot modeMalcolm Priestley1-3/+3
When in FE_TUNE_MODE_ONESHOT the frontend must report the actual capabilities so user can take appropriate action. With frontends that can't do auto inversion this is done by dvb-core automatically so CAN_INVERSION_AUTO is valid. However, when in FE_TUNE_MODE_ONESHOT this is not true. So only set FE_CAN_INVERSION_AUTO in modes other than FE_TUNE_MODE_ONESHOT Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Privacy Policy