path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-10-03phy: rockchip-typec: Check for errors from tcphy_phy_init()Douglas Anderson1-4/+9
The function tcphy_phy_init() could return an error but the callers weren't checking the return value. They should. In at least one case while testing I saw the message "wait pma ready timeout" which indicates that tcphy_phy_init() really could return an error and we should account for it. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-09-26phy: rockchip-typec: Don't set the aux voltage swing to 400 mVDouglas Anderson1-3/+4
On rk3399-gru-kevin there are some cases where we're seeing AUX CH failures when trying to do DisplayPort over type C. Problems are intermittent and don't reproduce all the time. Problems are often bursty and failures persist for several seconds before going away. The failure case I focused on is: * A particular type C to HDMI adapter. * One orientation (flip mode) of that adapter. * Easier to see failures when something is plugged into the _other type C port at the same time. * Problems reproduce on both type C ports (left and right side). Ironically problems also stop reproducing when I solder wires onto the AUX CH signals on a port (even if no scope is connected to the signals). In this case, problems only stop reproducing on the port with the wires connected. From the above it appears that something about the signaling on the aux channel is marginal and any slight differences can bring us over the edge to failure. It turns out that we can fix our problems by just increasing the voltage swing of the AUX CH, giving us a bunch of extra margin. In DP up to version 1.2 the voltage swing on the aux channel was specced as .29 V to 1.38 V. In DP version 1.3 the aux channel voltage was tightened to be between .29 V and .40 V, but it clarifies that it really only needs the lower voltage when operating at the highest speed (HBR3 mode). So right now we are trying to use a voltage that technically should be valid for all versions of the spec (including version 1.3 when transmitting at HBR3). That would be great to do if it worked reliably. ...but it doesn't seem to. It turns out that if you continue to read through the DP part of the rk3399 TRM and other parts of the type C PHY spec you'll find out that while the rk3399 does support DP 1.3, it doesn't support HBR3. The docs specifically say "RBR, HBR and HBR2 data rates only". Thus there is actually no requirement to support an AUX CH swing of .4 V. Even if there is no actual requirement to support the tighter voltage swing, one could possibly argue that we should support it anyway. The DP spec clarifies that the lower voltage on the AUX CH will reduce cross talk in some cases and that seems like it could be beneficial even at the lower bit rates. At the moment, though, we are seeing problems with the AUX CH and not on the other lines. Also, checking another known working and similar laptop shows that the other laptop runs the AUX channel at a higher voltage. Other notes: * Looking at measurements done on the AUX CH we weren't actually compliant with the DP 1.3 spec anyway. AUX CH peek-to-peek voltage was measured on rk3399-gru-kevin as .466 V which is > .4 V. * With this new patch the AUX channel isn't actually 1.0 V, but it has been confirmed that the signal is better and has more margin. Eye diagram passes. * If someone were truly an expert in the Type C PHY and in DisplayPort signaling they might be able to make things work and keep the voltage at < .4 V. The Type C PHY seems to have a plethora of tuning knobs that could almost certainly improve the signal integrity. Some of these things (like enabling tx_fcm_full_margin) even seem to fix my problems. However, lacking expertise I can't say whether this is a better or worse solution. Tightening signals to give cleaner waveforms can often have adverse affects, like increasing EMI or adding noise to other signals. I'd rather not tune things like this without a healthy application of expertise that I don't have. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-09-26phy: rockchip-typec: Set the AUX channel flip state earlierDouglas Anderson1-20/+42
On some DP monitors we found that setting the wrong flip state on the AUX channel could cause the monitor to stop asserting HotPlug Detect (HPD). Setting the right flip state caused these monitors to start asserting HotPlug Detect again. Here's what we believe was happening: * We'd plug in the monitor and we'd see HPD assert * We'd quickly see HPD deassert * The kernel would try to init the type C PHY but would init it in USB mode (because there was a peripheral there but no HPD) * Because the kernel never set the flip mode properly we'd never see the HPD come back. With this change, we'll still see HPD disappear (we don't think there's anything we can do about that), but then it will come back. Overall we can say that it's sane to set the AUX channel flip state even when HPD is not asserted. NOTE: to make this change possible, I needed to do a bit of cleanup to the tcphy_dp_aux_calibration() function so that it doesn't ever clobber the FLIP state. This made it very obvious that a line of code documented as "setting bit 12" also did a bunch of other magic, undocumented stuff. For now I'll just break out the bits and add a comment that this is black magic and we'll try to document tcphy_dp_aux_calibration() better in a future CL. ALSO NOTE: the old function used to write a bunch of hardcoded values in _some_ cases instead of doing a read-modify-write. One could possibly assert that these could have had (beneficial) side effects and thus with this new code (which always does read-modify-write) we could have a bug. We shouldn't need to worry, though, since in the old code tcphy_dp_aux_calibration() was always called following the de-assertion of "reset" the the type C PHY. ...so the type C PHY was always in default state. TX_ANA_CTRL_REG_1 is documented to be 0x0 after reset. This was also confirmed by printk. Suggested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-09-26phy: mvebu-cp110: checking for NULL instead of IS_ERR()Dan Carpenter1-2/+2
devm_ioremap_resource() never returns NULL, it only returns error pointers so this test needs to be changed. Fixes: d0438bd6aa09 ("phy: add the mvebu cp110 comphy driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-09-26phy: mvebu-cp110-comphy: explicitly set the pipe selectorAntoine Tenart1-0/+10
The pipe selector is used to select some modes (such as USB or PCIe). Otherwise it must be set to 0 (or "unconnected"). This patch does this to ensure it is not set to an incompatible value when using the supported modes (SGMII, 10GKR). Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-09-26phy: mvebu-cp110-comphy: fix mux error checkAntoine Tenart1-2/+2
The mux value is retrieved from the mvebu_comphy_get_mux() function which returns an int. In mvebu_comphy_power_on() this int is stored to a u32 and a check is made to ensure it's not negative. Which is wrong. This fixes it. Fixes: d0438bd6aa09 ("phy: add the mvebu cp110 comphy driver") Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-09-26phy: phy-mtk-tphy: fix NULL point of chip bankChunfeng Yun1-1/+2
Chip bank of version-1 is initialized as NULL, but it's used by pcie_phy_instance_power_on/off(), so assign it a right address. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-09-26phy: tegra: Handle return value of kasprintfArvind Yadav1-0/+2
kasprintf() can fail and it's return value must be checked. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-09-16Merge tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds4-16/+16
Pull UBI updates from Richard Weinberger: "Minor improvements" * tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifs: UBI: Fix two typos in comments ubi: fastmap: fix spelling mistake: "invalidiate" -> "invalidate" ubi: pr_err() strings should end with newlines ubi: pr_err() strings should end with newlines ubi: pr_err() strings should end with newlines
2017-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds23-116/+293
Pull networking fixes from David Miller: 1) Fix hotplug deadlock in hv_netvsc, from Stephen Hemminger. 2) Fix double-free in rmnet driver, from Dan Carpenter. 3) INET connection socket layer can double put request sockets, fix from Eric Dumazet. 4) Don't match collect metadata-mode tunnels if the device is down, from Haishuang Yan. 5) Do not perform TSO6/GSO on ipv6 packets with extensions headers in be2net driver, from Suresh Reddy. 6) Fix scaling error in gen_estimator, from Eric Dumazet. 7) Fix 64-bit statistics deadlock in systemport driver, from Florian Fainelli. 8) Fix use-after-free in sctp_sock_dump, from Xin Long. 9) Reject invalid BPF_END instructions in verifier, from Edward Cree. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) mlxsw: spectrum_router: Only handle IPv4 and IPv6 events Documentation: link in networking docs tcp: fix data delivery rate bpf/verifier: reject BPF_ALU64|BPF_END sctp: do not mark sk dumped when inet_sctp_diag_fill returns err sctp: fix an use-after-free issue in sctp_sock_dump netvsc: increase default receive buffer size tcp: update skb->skb_mstamp more carefully net: ipv4: fix l3slave check for index returned in IP_PKTINFO net: smsc911x: Quieten netif during suspend net: systemport: Fix 64-bit stats deadlock net: vrf: avoid gcc-4.6 warning qed: remove unnecessary call to memset tg3: clean up redundant initialization of tnapi tls: make tls_sw_free_resources static sctp: potential read out of bounds in sctp_ulpevent_type_enabled() MAINTAINERS: review Renesas DT bindings as well net_sched: gen_estimator: fix scaling error in bytes/packets samples nfp: wait for the NSP resource to appear on boot nfp: wait for board state before talking to the NSP ...
2017-09-16Merge branch 'for-linus' of ↵Linus Torvalds11-11/+314
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: "A second round of updates for the input subsystem: - a new driver for PWM-controlled vibrators - ucb1400 touchscreen driver had completely busted suspend/resume handling - we now handle "home" button found on some devices with Goodix touchscreens - assorted other fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add Gigabyte P57 to the keyboard reset table Input: xpad - validate USB endpoint type during probe Input: ucb1400_ts - fix suspend and resume handling Input: edt-ft5x06 - fix access to non-existing register Input: elantech - make arrays debounce_packet static, reduces object code size Input: surface3_spi - make const array header static, reduces object code size Input: goodix - add support for capacitive home button Input: add a driver for PWM controllable vibrators Input: adi - make array seq static, reduces object code size
2017-09-16firmware: Restore support for built-in firmwareMarkus Trippelsdorf1-4/+1
Commit 5620a0d1aac ("firmware: delete in-kernel firmware") removed the entire firmware directory. Unfortunately it thereby also removed the support for built-in firmware. This restores the ability to build firmware directly into the kernel by pruning the original Makefile to the necessary minimum. The default for EXTRA_FIRMWARE_DIR is now the standard directory /lib/firmware/. Fixes: 5620a0d1aac ("firmware: delete in-kernel firmware") Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de> Acked-by: Greg K-H <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-16mlxsw: spectrum_router: Only handle IPv4 and IPv6 eventsIdo Schimmel1-1/+2
The driver doesn't support events from address families other than IPv4 and IPv6, so ignore them. Otherwise, we risk queueing a work item before it's initialized. This can happen in case a VRF is configured when MROUTE_MULTIPLE_TABLES is enabled, as the VRF driver will try to add an l3mdev rule for the IPMR family. Fixes: 65e65ec137f4 ("mlxsw: spectrum_router: Don't ignore IPv6 notifications") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Andreas Rammhold <andreas@rammhold.de> Reported-by: Florian Klink <flokli@flokli.de> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15Merge branch '4.14-features' of ↵Linus Torvalds21-656/+1346
git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.14 for MIPS; below a summary of the non-merge commits: CM: - Rename mips_cm_base to mips_gcr_base - Specify register size when generating accessors - Use BIT/GENMASK for register fields, order & drop shifts - Add cluster & block args to mips_cm_lock_other() CPC: - Use common CPS accessor generation macros - Use BIT/GENMASK for register fields, order & drop shifts - Introduce register modify (set/clear/change) accessors - Use change_*, set_* & clear_* where appropriate - Add CM/CPC 3.5 register definitions - Use GlobalNumber macros rather than magic numbers - Have asm/mips-cps.h include CM & CPC headers - Cluster support for topology functions - Detect CPUs in secondary clusters CPS: - Read GIC_VL_IDENT directly, not via irqchip driver DMA: - Consolidate coherent and non-coherent dma_alloc code - Don't use dma_cache_sync to implement fd_cacheflush FPU emulation / FP assist code: - Another series of 14 commits fixing corner cases such as NaN propgagation and other special input values. - Zero bits 32-63 of the result for a CLASS.D instruction. - Enhanced statics via debugfs - Do not use bools for arithmetic. GCC 7.1 moans about this. - Correct user fault_addr type Generic MIPS: - Enhancement of stack backtraces - Cleanup from non-existing options - Handle non word sized instructions when examining frame - Fix detection and decoding of ADDIUSP instruction - Fix decoding of SWSP16 instruction - Refactor handling of stack pointer in get_frame_info - Remove unreachable code from force_fcr31_sig() - Convert to using %pOF instead of full_name - Remove the R6000 support. - Move FP code from *_switch.S to *_fpu.S - Remove unused ST_OFF from r2300_switch.S - Allow platform to specify multiple its.S files - Add #includes to various files to ensure code builds reliable and without warning.. - Remove __invalidate_kernel_vmap_range - Remove plat_timer_setup - Declare various variables & functions static - Abstract CPU core & VP(E) ID access through accessor functions - Store core & VP IDs in GlobalNumber-style variable - Unify checks for sibling CPUs - Add CPU cluster number accessors - Prevent direct use of generic_defconfig - Make CONFIG_MIPS_MT_SMP default y - Add __ioread64_copy - Remove unnecessary inclusions of linux/irqchip/mips-gic.h GIC: - Introduce asm/mips-gic.h with accessor functions - Use new GIC accessor functions in mips-gic-timer - Remove counter access functions from irq-mips-gic.c - Remove gic_read_local_vp_id() from irq-mips-gic.c - Simplify shared interrupt pending/mask reads in irq-mips-gic.c - Simplify gic_local_irq_domain_map() in irq-mips-gic.c - Drop gic_(re)set_mask() functions in irq-mips-gic.c - Remove gic_set_polarity(), gic_set_trigger(), gic_set_dual_edge(), gic_map_to_pin() and gic_map_to_vpe() from irq-mips-gic.c. - Convert remaining shared reg access, local int mask access and remaining local reg access to new accessors - Move GIC_LOCAL_INT_* to asm/mips-gic.h - Remove GIC_CPU_INT* macros from irq-mips-gic.c - Move various definitions to the driver - Remove gic_get_usm_range() - Remove __gic_irq_dispatch() forward declaration - Remove gic_init() - Use mips_gic_present() in place of gic_present and remove gic_present - Move gic_get_c0_*_int() to asm/mips-gic.h - Remove linux/irqchip/mips-gic.h - Inline __gic_init() - Inline gic_basic_init() - Make pcpu_masks a per-cpu variable - Use pcpu_masks to avoid reading GIC_SH_MASK* - Clean up mti, reserved-cpu-vectors handling - Use cpumask_first_and() in gic_set_affinity() - Let the core set struct irq_common_data affinity microMIPS: - Fix microMIPS stack unwinding on big endian systems MIPS-GIC: - SYNC after enabling GIC region NUMA: - Remove the unused parent_node() macro R6: - Constify r2_decoder_tables - Add accessor & bit definitions for GlobalNumber SMP: - Constify smp ops - Allow boot_secondary SMP op to return errors VDSO: - Drop gic_get_usm_range() usage - Avoid use of linux/irqchip/mips-gic.h Platform changes: Alchemy: - Add devboard machine type to cpuinfo - update cpu feature overrides - Threaded carddetect irqs for devboards AR7: - allow NULL clock for clk_get_rate BCM63xx: - Fix ENETDMA_6345_MAXBURST_REG offset - Allow NULL clock for clk_get_rate CI20: - Enable GPIO and RTC drivers in defconfig - Add ethernet and fixed-regulator nodes to DTS Generic platform: - Move Boston and NI 169445 FIT image source to their own files - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Allow filtering enabled boards by requirements - Don't explicitly disable CONFIG_USB_SUPPORT - Bump default NR_CPUS to 16 JZ4700: - Probe the jz4740-rtc driver from devicetree Lantiq: - Drop check of boot select from the spi-falcon driver. - Drop check of boot select from the lantiq-flash MTD driver. - Access boot cause register in the watchdog driver through regmap - Add device tree binding documentation for the watchdog driver - Add docs for the RCU DT bindings. - Convert the fpi bus driver to a platform_driver - Remove ltq_reset_cause() and ltq_boot_select( - Switch to a proper reset driver - Switch to a new drivers/soc GPHY driver - Add an USB PHY driver for the Lantiq SoCs using the RCU module - Use of_platform_default_populate instead of __dt_register_buses - Enable MFD_SYSCON to be able to use it for the RCU MFD - Replace ltq_boot_select() with dummy implementation. Loongson 2F: - Allow NULL clock for clk_get_rate Malta: - Use new GIC accessor functions NI 169445: - Add support for NI 169445 board. - Only include in 32r2el kernels Octeon: - Add support for watchdog of 78XX SOCs. - Add support for watchdog of CN68XX SOCs. - Expose support for mips32r1, mips32r2 and mips64r1 - Enable more drivers in config file - Add support for accessing the boot vector. - Remove old boot vector code from watchdog driver - Define watchdog registers for 70xx, 73xx, 78xx, F75xx. - Make CSR functions node aware. - Allow access to CIU3 IRQ domains. - Misc cleanups in the watchdog driver Omega2+: - New board, add support and defconfig Pistachio: - Enable Root FS on NFS in defconfig Ralink: - Add Mediatek MT7628A SoC - Allow NULL clock for clk_get_rate - Explicitly request exclusive reset control in the pci-mt7620 PCI driver. SEAD3: - Only include in 32 bit kernels by default VoCore: - Add VoCore as a vendor t0 dt-bindings - Add defconfig file" * '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (167 commits) MIPS: Refactor handling of stack pointer in get_frame_info MIPS: Stacktrace: Fix microMIPS stack unwinding on big endian systems MIPS: microMIPS: Fix decoding of swsp16 instruction MIPS: microMIPS: Fix decoding of addiusp instruction MIPS: microMIPS: Fix detection of addiusp instruction MIPS: Handle non word sized instructions when examining frame MIPS: ralink: allow NULL clock for clk_get_rate MIPS: Loongson 2F: allow NULL clock for clk_get_rate MIPS: BCM63XX: allow NULL clock for clk_get_rate MIPS: AR7: allow NULL clock for clk_get_rate MIPS: BCM63XX: fix ENETDMA_6345_MAXBURST_REG offset mips: Save all registers when saving the frame MIPS: Add DWARF unwinding to assembly MIPS: Make SAVE_SOME more standard MIPS: Fix issues in backtraces MIPS: jz4780: DTS: Probe the jz4740-rtc driver from devicetree MIPS: Ci20: Enable RTC driver watchdog: octeon-wdt: Add support for 78XX SOCs. watchdog: octeon-wdt: Add support for cn68XX SOCs. watchdog: octeon-wdt: File cleaning. ...
2017-09-15Merge tag 'pci-v4.14-fixes-1' of ↵Linus Torvalds1-11/+2
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Revert an attempt to fix a race while enabling upstream bridges because it broke iwlwifi firmware loading" * tag 'pci-v4.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: Avoid race while enabling upstream bridges"
2017-09-15Merge tag 'drm-fixes-for-v4.14-rc1' of ↵Linus Torvalds28-160/+236
git://people.freedesktop.org/~airlied/linux Pull drm AMD fixes from Dave Airlie: "Just had a single AMD fixes pull from Alex for rc1" * tag 'drm-fixes-for-v4.14-rc1' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: revert "fix deadlock of reservation between cs and gpu reset v2" drm/amdgpu: remove duplicate return statement drm/amdgpu: check memory allocation failure drm/amd/amdgpu: fix BANK_SELECT on Vega10 (v2) drm/amdgpu: inline amdgpu_ttm_do_bind again drm/amdgpu: fix amdgpu_ttm_bind drm/amdgpu: remove the GART copy hack drm/ttm:fix wrong decoding of bo_count drm/ttm: fix missing inc bo_count drm/amdgpu: set sched_hw_submission higher for KIQ (v3) drm/amdgpu: move default gart size setting into gmc modules drm/amdgpu: refine default gart size drm/amd/powerplay: ACG frequency added in PPTable drm/amdgpu: discard commands of killed processes drm/amdgpu: fix and cleanup shadow handling drm/amdgpu: add automatic per asic settings for gart_size drm/amdgpu/gfx8: fix spelling typo in mqd allocation drm/amd/powerplay: unhalt mec after loading drm/amdgpu/virtual_dce: Virtual display doesn't support disable vblank immediately drm/amdgpu: Fix huge page updates with CPU
2017-09-15Merge branch 'i2c/for-next' of ↵Linus Torvalds6-11/+1532
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: "I2C has two more new drivers: Altera FPGA and STM32F7" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i2c-stm32f7: add driver i2c: i2c-stm32f4: use generic definition of speed enum dt-bindings: i2c-stm32: Document the STM32F7 I2C bindings i2c: altera: Add Altera I2C Controller driver dt-bindings: i2c: Add Altera I2C Controller
2017-09-15netvsc: increase default receive buffer sizeStephen Hemminger1-1/+1
The default receive buffer size was reduced by recent change to a value which was appropriate for 10G and Windows Server 2016. But the value is too small for full performance with 40G on Azure. Increase the default back to maximum supported by host. Fixes: 8b5327975ae1 ("netvsc: allow controlling send/recv buffer size") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15net: smsc911x: Quieten netif during suspendGeert Uytterhoeven1-1/+14
If the network interface is kept running during suspend, the net core may call net_device_ops.ndo_start_xmit() while the Ethernet device is still suspended, which may lead to a system crash. E.g. on sh73a0/kzm9g and r8a73a4/ape6evm, the external Ethernet chip is driven by a PM controlled clock. If the Ethernet registers are accessed while the clock is not running, the system will crash with an imprecise external abort. As this is a race condition with a small time window, it is not so easy to trigger at will. Using pm_test may increase your chances: # echo 0 > /sys/module/printk/parameters/console_suspend # echo platform > /sys/power/pm_test # echo mem > /sys/power/state To fix this, make sure the network interface is quietened during suspend. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15net: systemport: Fix 64-bit stats deadlockFlorian Fainelli1-3/+0
We can enter a deadlock situation because there is no sufficient protection when ndo_get_stats64() runs in process context to guard against RX or TX NAPI contexts running in softirq, this can lead to the following lockdep splat and actual deadlock was experienced as well with an iperf session in the background and a while loop doing ifconfig + ethtool. [ 5.780350] ================================ [ 5.784679] WARNING: inconsistent lock state [ 5.789011] 4.13.0-rc7-02179-g32fae27c725d #70 Not tainted [ 5.794561] -------------------------------- [ 5.798890] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 5.804971] swapper/0/0 [HC0[0]:SC1[1]:HE0:SE0] takes: [ 5.810175] (&syncp->seq#2){+.?...}, at: [<c0768a28>] bcm_sysport_tx_reclaim+0x30/0x54 [ 5.818327] {SOFTIRQ-ON-W} state was registered at: [ 5.823278] bcm_sysport_get_stats64+0x17c/0x258 [ 5.828053] dev_get_stats+0x38/0xac [ 5.831776] rtnl_fill_stats+0x30/0x118 [ 5.835761] rtnl_fill_ifinfo+0x538/0xe24 [ 5.839921] rtmsg_ifinfo_build_skb+0x6c/0xd8 [ 5.844430] rtmsg_ifinfo_event.part.5+0x14/0x44 [ 5.849201] rtmsg_ifinfo+0x20/0x28 [ 5.852837] register_netdevice+0x628/0x6b8 [ 5.857171] register_netdev+0x14/0x24 [ 5.861051] bcm_sysport_probe+0x30c/0x438 [ 5.865280] platform_drv_probe+0x50/0xb0 [ 5.869418] driver_probe_device+0x2e8/0x450 [ 5.873817] __driver_attach+0x104/0x120 [ 5.877871] bus_for_each_dev+0x7c/0xc0 [ 5.881834] bus_add_driver+0x1b0/0x270 [ 5.885797] driver_register+0x78/0xf4 [ 5.889675] do_one_initcall+0x54/0x190 [ 5.893646] kernel_init_freeable+0x144/0x1d0 [ 5.898135] kernel_init+0x8/0x110 [ 5.901665] ret_from_fork+0x14/0x2c [ 5.905363] irq event stamp: 24263 [ 5.908804] hardirqs last enabled at (24262): [<c08eecf0>] net_rx_action+0xc4/0x4e4 [ 5.916624] hardirqs last disabled at (24263): [<c0a7da00>] _raw_spin_lock_irqsave+0x1c/0x98 [ 5.925143] softirqs last enabled at (24258): [<c022a7fc>] irq_enter+0x84/0x98 [ 5.932524] softirqs last disabled at (24259): [<c022a918>] irq_exit+0x108/0x16c [ 5.939985] [ 5.939985] other info that might help us debug this: [ 5.946576] Possible unsafe locking scenario: [ 5.946576] [ 5.952556] CPU0 [ 5.955031] ---- [ 5.957506] lock(&syncp->seq#2); [ 5.960955] <Interrupt> [ 5.963604] lock(&syncp->seq#2); [ 5.967227] [ 5.967227] *** DEADLOCK *** [ 5.967227] [ 5.973222] 1 lock held by swapper/0/0: [ 5.977092] #0: (&(&ring->lock)->rlock){..-...}, at: [<c0768a18>] bcm_sysport_tx_reclaim+0x20/0x54 So just remove the u64_stats_update_begin()/end() pair in ndo_get_stats64() since it does not appear to be useful for anything. No inconsistency was observed with either ifconfig or ethtool, global TX counts equal the sum of per-queue TX counts on a 32-bit architecture. Fixes: 10377ba7673d ("net: systemport: Support 64bit statistics") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15net: vrf: avoid gcc-4.6 warningArnd Bergmann1-3/+3
When building an allmodconfig kernel with gcc-4.6, we get a rather odd warning: drivers/net/vrf.c: In function ‘vrf_ip6_input_dst’: drivers/net/vrf.c:964:3: error: initialized field with side-effects overwritten [-Werror] drivers/net/vrf.c:964:3: error: (near initialization for ‘fl6’) [-Werror] I have no idea what this warning is even trying to say, but it does seem like a false positive. Reordering the initialization in to match the structure definition gets rid of the warning, and might also avoid whatever gcc thinks is wrong here. Fixes: 9ff74384600a ("net: vrf: Handle ipv6 multicast and link-local addresses") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15qed: remove unnecessary call to memsetHimanshu Jha1-1/+0
call to memset to assign 0 value immediately after allocating memory with kzalloc is unnecesaary as kzalloc allocates the memory filled with 0 value. Semantic patch used to resolve this issue: @@ expression e,e2; constant c; statement S; @@ e = kzalloc(e2, c); if(e == NULL) S - memset(e, 0, e2); Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Acked-by: Sudarsana Kalluru <sudarsana.kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15Merge branch 'next' into for-linusDmitry Torokhov11-11/+314
Prepare second round of input updates for 4.14 merge window.
2017-09-15Input: i8042 - add Gigabyte P57 to the keyboard reset tableKai-Heng Feng1-0/+7
Similar to other Gigabyte laptops, the touchpad on P57 requires a keyboard reset to detect Elantech touchpad correctly. BugLink: https://bugs.launchpad.net/bugs/1594214 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-15Revert "PCI: Avoid race while enabling upstream bridges"Bjorn Helgaas1-11/+2
This reverts commit 40f11adc7cd9281227f0a6a627d966dd0a5f0cd9. Jens found that iwlwifi firmware loading failed on a Lenovo X1 Carbon, gen4: iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-34.ucode failed with error -2 iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-33.ucode failed with error -2 iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-32.ucode failed with error -2 iwlwifi 0000:04:00.0: loaded firmware version 31.532993.0 op_mode iwlmvm iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208 ... iwlwifi 0000:04:00.0: Failed to load firmware chunk! iwlwifi 0000:04:00.0: Could not load the [0] uCode section iwlwifi 0000:04:00.0: Failed to start INIT ucode: -110 iwlwifi 0000:04:00.0: Failed to run INIT ucode: -110 He bisected it to 40f11adc7cd9 ("PCI: Avoid race while enabling upstream bridges"). Revert that commit to fix the regression. Link: http://lkml.kernel.org/r/4bcbcbc1-7c79-09f0-5071-bc2f53bf6574@kernel.dk Fixes: 40f11adc7cd9 ("PCI: Avoid race while enabling upstream bridges") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Srinath Mannam <srinath.mannam@broadcom.com> CC: Jens Axboe <axboe@kernel.dk> CC: Luca Coelho <luca@coelho.fi> CC: Johannes Berg <johannes@sipsolutions.net> CC: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2017-09-14Merge branch 'work.mount' of ↵Linus Torvalds2-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull mount flag updates from Al Viro: "Another chunk of fmount preparations from dhowells; only trivial conflicts for that part. It separates MS_... bits (very grotty mount(2) ABI) from the struct super_block ->s_flags (kernel-internal, only a small subset of MS_... stuff). This does *not* convert the filesystems to new constants; only the infrastructure is done here. The next step in that series is where the conflicts would be; that's the conversion of filesystems. It's purely mechanical and it's better done after the merge, so if you could run something like list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$') sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \ -e 's/\<MS_NOSUID\>/SB_NOSUID/g' \ -e 's/\<MS_NODEV\>/SB_NODEV/g' \ -e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \ -e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \ -e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \ -e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \ -e 's/\<MS_NOATIME\>/SB_NOATIME/g' \ -e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \ -e 's/\<MS_SILENT\>/SB_SILENT/g' \ -e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \ -e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \ -e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \ -e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \ $list and commit it with something along the lines of 'convert filesystems away from use of MS_... constants' as commit message, it would save a quite a bit of headache next cycle" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: Differentiate mount flags (MS_*) from internal superblock flags VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb) vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
2017-09-14Merge branch 'work.set_fs' of ↵Linus Torvalds10-82/+34
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more set_fs removal from Al Viro: "Christoph's 'use kernel_read and friends rather than open-coding set_fs()' series" * 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: unexport vfs_readv and vfs_writev fs: unexport vfs_read and vfs_write fs: unexport __vfs_read/__vfs_write lustre: switch to kernel_write gadget/f_mass_storage: stop messing with the address limit mconsole: switch to kernel_read btrfs: switch write_buf to kernel_write net/9p: switch p9_fd_read to kernel_write mm/nommu: switch do_mmap_private to kernel_read serial2002: switch serial2002_tty_write to kernel_{read/write} fs: make the buf argument to __kernel_write a void pointer fs: fix kernel_write prototype fs: fix kernel_read prototype fs: move kernel_read to fs/read_write.c fs: move kernel_write to fs/read_write.c autofs4: switch autofs4_write to __kernel_write ashmem: switch to ->read_iter
2017-09-14Merge tag 'for-4.14/dm-changes' of ↵Linus Torvalds20-156/+184
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Some request-based DM core and DM multipath fixes and cleanups - Constify a few variables in DM core and DM integrity - Add bufio optimization and checksum failure accounting to DM integrity - Fix DM integrity to avoid checking integrity of failed reads - Fix DM integrity to use init_completion - A couple DM log-writes target fixes - Simplify DAX flushing by eliminating the unnecessary flush abstraction that was stood up for DM's use. * tag 'for-4.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dax: remove the pmem_dax_ops->flush abstraction dm integrity: use init_completion instead of COMPLETION_INITIALIZER_ONSTACK dm integrity: make blk_integrity_profile structure const dm integrity: do not check integrity for failed read operations dm log writes: fix >512b sectorsize support dm log writes: don't use all the cpu while waiting to log blocks dm ioctl: constify ioctl lookup table dm: constify argument arrays dm integrity: count and display checksum failures dm integrity: optimize writing dm-bufio buffers that are partially changed dm rq: do not update rq partially in each ending bio dm rq: make dm-sq requeuing behavior consistent with dm-mq behavior dm mpath: complain about unsupported __multipath_map_bio() return values dm mpath: avoid that building with W=1 causes gcc 7 to complain about fall-through
2017-09-14Merge tag 'fbdev-v4.14' of git://github.com/bzolnier/linuxLinus Torvalds91-260/+378
Pull fbdev updates from Bartlomiej Zolnierkiewicz: - make fbcon a built-time depency for fbdev (fbcon was tristate option before, now it is a bool) - this is a first step in preparations for making console_lock usage saner (currently it acts like the BKL for all things fbdev/fbcon) (Daniel Vetter) - add fbcon=margin:<color> command line option to select the fbcon margin color (David Lechner) - add DMI quirk table for x86 systems which need fbcon rotation (devices like Asus T100HA, GPD Pocket, the GPD win and the I.T.Works TW891) (Hans de Goede) - fix 1bpp logo support for unusual width (needed by LEGO MINDSTORMS EV3) (David Lechner) - enable Xilinx FB driver for ARM ZynqMP platform (Michal Simek) - fix use after free in the error path of udlfb driver (Anton Vasilyev) - fix error return code handling in pxa3xx_gcu driver (Gustavo A. R. Silva) - fix bootparams.screeninfo arguments checking in vgacon (Jan H. Schönherr) - do not leak uninitialized padding in clk to userspace in the debug code of atyfb driver (Vladis Dronov) - fix compiler warnings in fbcon code and matroxfb driver (Arnd Bergmann) - convert fbdev susbsytem to using %pOF instead of full_name (Rob Herring) - structures constifications (Arvind Yadav, Bhumika Goyal, Gustavo A. R. Silva, Julia Lawall) - misc cleanups (Gustavo A. R. Silva, Hyun Kwon, Julia Lawall, Kuninori Morimoto, Lynn Lei) * tag 'fbdev-v4.14' of git://github.com/bzolnier/linux: (75 commits) video/console: Update BIOS dates list for GPD win console rotation DMI quirk video/console: Add rotated LCD-panel DMI quirk for the VIOS LTH17 video: fbdev: sis: fix duplicated code for different branches video: fbdev: make fb_var_screeninfo const video: fbdev: aty: do not leak uninitialized padding in clk to userspace vgacon: Prevent faulty bootparams.screeninfo from causing harm video: fbdev: make fb_videomode const video/console: Add new BIOS date for GPD pocket to dmi quirk table fbcon: remove restriction on margin color video: ARM CLCD: constify amba_id video: fm2fb: constify zorro_device_id video: fbdev: annotate fb_fix_screeninfo with const and __initconst omapfb: constify omap_video_timings structures video: fbdev: udlfb: Fix use after free on dlfb_usb_probe error path fbdev: i810: make fb_ops const fbdev: matrox: make fb_ops const video: fbdev: pxa3xx_gcu: fix error return code in pxa3xx_gcu_probe() video: fbdev: Enable Xilinx FB for ZynqMP video: fbdev: Fix multiple style issues in xilinxfb video: fbdev: udlfb: constify usb_device_id. ...
2017-09-14Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds25-122/+314
Pull watchdog updates from Wim Van Sebroeck: - add support for the watchdog on Meson8 and Meson8m2 - add support for MediaTek MT7623 and MT7622 SoC - add support for the r8a77995 wdt - explicitly request exclusive reset control for asm9260_wdt, zx2967_wdt, rt2880_wdt and mt7621_wdt - improvements to asm9260_wdt, aspeed_wdt, renesas_wdt and cadence_wdt - add support for reading freq via CCF + suspend/resume support for of_xilinx_wdt - constify watchdog_ops and various device-id structures - revert of commit 1fccb73011ea ("iTCO_wdt: all versions count down twice") (Bug 196509) * git://www.linux-watchdog.org/linux-watchdog: (40 commits) watchdog: mei_wdt: constify mei_cl_device_id watchdog: sp805: constify amba_id watchdog: ziirave: constify i2c_device_id watchdog: sc1200: constify pnp_device_id dt-bindings: watchdog: renesas-wdt: Add support for the r8a77995 wdt watchdog: renesas_wdt: update copyright dates watchdog: renesas_wdt: make 'clk' a variable local to probe() watchdog: renesas_wdt: consistently use RuntimePM for clock management watchdog: aspeed: Support configuration of external signal properties dt-bindings: watchdog: aspeed: External reset signal properties drivers/watchdog: Add optional ASPEED device tree properties drivers/watchdog: ASPEED reference dev tree properties for config watchdog: da9063_wdt: Simplify by removing unneeded struct... watchdog: bcm7038: Check the return value from clk_prepare_enable() watchdog: qcom: Check for platform_get_resource() failure watchdog: of_xilinx_wdt: Add suspend/resume support watchdog: of_xilinx_wdt: Add support for reading freq via CCF dt-bindings: watchdog: mediatek: add support for MediaTek MT7623 and MT7622 SoC watchdog: max77620_wdt: constify platform_device_id watchdog: pcwd_usb: constify usb_device_id ...
2017-09-14Merge branch 'dmi-for-linus' of ↵Linus Torvalds41-44/+44
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull dmi update from Jean Delvare: "Mark all struct dmi_system_id instances const" * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: dmi: Mark all struct dmi_system_id instances const
2017-09-14Merge tag 'pinctrl-v4.14-2' of ↵Linus Torvalds6-34/+120
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "This slew of fixes for pin control was noticed and patched up early, so to get the annoyance out of the way for -rc1 it would make sense to send them already. - Fix a build include in the Uniphier driver to keep pace with ongoing refactorings. - Fix a slew of minor semantic and syntactic issues as well as stricting up Kconfig for the new Spreadtrum driver. - Fix the GPIO interrupt set-up on the Marvell 37xx Armada as fallout for dynamically allocating irq descriptors from the core. (Also tagged for stable.) - Fix AMD register suspend/resume state spool/unspooling so that wakeup works as it should. (Also tagged for stable.)" * tag 'pinctrl-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl/amd: save pin registers over suspend/resume pinctrl: armada-37xx: Fix gpio interrupt setup pinctrl: sprd: fix off by one bugs pinctrl: sprd: check for allocation failure pinctrl: sprd: Restrict PINCTRL_SPRD to ARCH_SPRD or COMPILE_TEST pinctrl: sprd: fix build errors and dependencies pinctrl: sprd: make three local functions static pinctrl: uniphier: include <linux/build_bug.h> instead of <linux/bug.h>
2017-09-14tg3: clean up redundant initialization of tnapiColin Ian King1-2/+2
tnapi is being initialized and then immediately updated and hence the initialiation is redundant. Clean up the warning by moving the declaration and initialization to the inside of the for-loop. Cleans up clang scan-build warning: warning: Value stored to 'tnapi' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-14i2c: i2c-stm32f7: add driverPierre-Yves MORDRET3-0/+983
This patch adds initial support for the STM32F7 I2C controller. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-09-14i2c: i2c-stm32f4: use generic definition of speed enumPierre-Yves MORDRET2-11/+27
This patch uses a more generic definition of speed enum for i2c-stm32f4 driver. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Reviewed-by: Ludovic BARRE <ludovic.barre@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-09-14dmi: Mark all struct dmi_system_id instances constChristoph Hellwig41-44/+44
... and __initconst if applicable. Based on similar work for an older kernel in the Grsecurity patch. [JD: fix toshiba-wmi build] [JD: add htcpen] [JD: move __initconst where checkscript wants it] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2017-09-13mm: treewide: remove GFP_TEMPORARY allocation flagMichal Hocko17-30/+30
GFP_TEMPORARY was introduced by commit e12ba74d8ff3 ("Group short-lived and reclaimable kernel allocations") along with __GFP_RECLAIMABLE. It's primary motivation was to allow users to tell that an allocation is short lived and so the allocator can try to place such allocations close together and prevent long term fragmentation. As much as this sounds like a reasonable semantic it becomes much less clear when to use the highlevel GFP_TEMPORARY allocation flag. How long is temporary? Can the context holding that memory sleep? Can it take locks? It seems there is no good answer for those questions. The current implementation of GFP_TEMPORARY is basically GFP_KERNEL | __GFP_RECLAIMABLE which in itself is tricky because basically none of the existing caller provide a way to reclaim the allocated memory. So this is rather misleading and hard to evaluate for any benefits. I have checked some random users and none of them has added the flag with a specific justification. I suspect most of them just copied from other existing users and others just thought it might be a good idea to use without any measuring. This suggests that GFP_TEMPORARY just motivates for cargo cult usage without any reasoning. I believe that our gfp flags are quite complex already and especially those with highlevel semantic should be clearly defined to prevent from confusion and abuse. Therefore I propose dropping GFP_TEMPORARY and replace all existing users to simply use GFP_KERNEL. Please note that SLAB users with shrinkers will still get __GFP_RECLAIMABLE heuristic and so they will be placed properly for memory fragmentation prevention. I can see reasons we might want some gfp flag to reflect shorterm allocations but I propose starting from a clear semantic definition and only then add users with proper justification. This was been brought up before LSF this year by Matthew [1] and it turned out that GFP_TEMPORARY really doesn't have a clear semantic. It seems to be a heuristic without any measured advantage for most (if not all) its current users. The follow up discussion has revealed that opinions on what might be temporary allocation differ a lot between developers. So rather than trying to tweak existing users into a semantic which they haven't expected I propose to simply remove the flag and start from scratch if we really need a semantic for short term allocations. [1] http://lkml.kernel.org/r/20170118054945.GD18349@bombadil.infradead.org [akpm@linux-foundation.org: fix typo] [akpm@linux-foundation.org: coding-style fixes] [sfr@canb.auug.org.au: drm/i915: fix up] Link: http://lkml.kernel.org/r/20170816144703.378d4f4d@canb.auug.org.au Link: http://lkml.kernel.org/r/20170728091904.14627-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Neil Brown <neilb@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-13IB/mlx4: fix sprintf format warningArnd Bergmann1-1/+1
gcc-7 points out that a negative port_num value would overflow the string buffer: drivers/infiniband/hw/mlx4/sysfs.c: In function 'mlx4_ib_device_register_sysfs': drivers/infiniband/hw/mlx4/sysfs.c:251:16: error: 'sprintf' may write a terminating nul past the end of the destination [-Werror=format-overflow=] drivers/infiniband/hw/mlx4/sysfs.c:251:2: note: 'sprintf' output between 2 and 11 bytes into a destination of size 10 drivers/infiniband/hw/mlx4/sysfs.c:303:17: error: 'sprintf' may write a terminating nul past the end of the destination [-Werror=format-overflow=] drivers/infiniband/hw/mlx4/sysfs.c:303:3: note: 'sprintf' output between 2 and 11 bytes into a destination of size 10 While we should be able to assume that port_num is positive here, making the buffer one byte longer has no downsides and avoids the warning. Fixes: c1e7e466120b ("IB/mlx4: Add iov directory in sysfs under the ib device") Link: http://lkml.kernel.org/r/20170714120720.906842-23-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-13drivers/media/cec/cec-adap.c: fix build with gcc-4.4.4Andrew Morton1-1/+4
gcc-4.4.4 has issues with initialization of anonymous unions: drivers/media/cec/cec-adap.c: In function 'cec_queue_msg_fh': drivers/media/cec/cec-adap.c:184: error: unknown field 'lost_msgs' specified in initializer work around this. Fixes: 6b2bbb08747a5 ("media: cec: rework the cec event handling") Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-13i2c: altera: Add Altera I2C Controller driverThor Thayer3-0/+522
Add driver support for the Altera I2C Controller. The I2C controller is soft IP for use in FPGAs. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-09-13nfp: wait for the NSP resource to appear on bootJakub Kicinski3-0/+51
The control process (NSP) may take some time to complete its initialization. This is not a problem on most servers, but on very fast-booting machines it may not be ready for operation when driver probes the device. There is also a version of the flash in the wild where NSP tries to train the links as part of init. To wait for NSP initialization we should make sure its resource has already been added to the resource table. NSP adds itself there as last step of init. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-13nfp: wait for board state before talking to the NSPJakub Kicinski2-23/+43
Board state informs us which low-level initialization stages the card has completed. We should wait for the card to be fully initialized before trying to communicate with it, not only before we configure passing traffic. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-13nfp: add whitelist of supported flow dissectorPieter Jansen van Vuuren1-0/+13
Previously we did not check the flow dissector against a list of allowed and supported flow key dissectors. This patch introduces such a list and correctly rejects unsupported flow keys. Fixes: 43f84b72c50d ("nfp: add metadata to each flow offload") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-13UBI: Fix two typos in commentsUwe Kleine-König1-2/+2
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-09-13ubi: fastmap: fix spelling mistake: "invalidiate" -> "invalidate"Colin Ian King1-1/+1
Trivial fix to spelling mistake in ubi_err error message Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-09-13ubi: pr_err() strings should end with newlinesBen Dooks1-3/+3
In build.c, the following pr_err calls should be terminated with a new-line to avoid other messages being concatenated onto the end. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-09-13ubi: pr_err() strings should end with newlinesBen Dooks1-4/+4
In ubi_attach_mtd_dev() the pr_err() calls should have their messgaes terminated with a new-line to avoid other messages being concatenated onto the end. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-09-13ubi: pr_err() strings should end with newlinesBen Dooks1-6/+6
The ubi_init() function has a few error paths that use the pr_err() to output errors. These should have new lines on them as pr_err() does not automatically do this. This fixes issues where if multiple mtd fail to bind to ubi the console output starts wrapping around. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-09-13Merge tag 'clk-for-linus' of ↵Linus Torvalds114-1037/+8040
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The diff is dominated by the Allwinner A10/A20 SoCs getting converted to the sunxi-ng framework. Otherwise, the heavy hitters are various drivers for SoCs like AT91, Amlogic, Renesas, and Rockchip. There are some other new clk drivers in here too but overall this is just a bunch of clk drivers for various different pieces of hardware and a collection of non-critical fixes for clk drivers. New Drivers: - Allwinner R40 SoCs - Renesas R-Car Gen3 USB 2.0 clock selector PHY - Atmel AT91 audio PLL - Uniphier PXs3 SoCs - ARC HSDK Board PLLs - AXS10X Board PLLs - STMicroelectronics STM32H743 SoCs Removed Drivers: - Non-compiling mb86s7x support Updates: - Allwinner A10/A20 SoCs converted to sunxi-ng framework - Allwinner H3 CPU clk fixes - Renesas R-Car D3 SoC - Renesas V2H and M3-W modules - Samsung Exynos5420/5422/5800 audio fixes - Rockchip fractional clk approximation fixes - Rockchip rk3126 SoC support within the rk3128 driver - Amlogic gxbb CEC32 and sd_emmc clks - Amlogic meson8b reset controller support - IDT VersaClock 5P49V5925/5P49V6901 support - Qualcomm MSM8996 SMMU clks - Various 'const' applications for struct clk_ops - si5351 PLL reset bugfix - Uniphier audio on LD11/LD20 and ethernet support on LD11/LD20/Pro4/PXs2 - Assorted Tegra clk driver fixes" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (120 commits) clk: si5351: fix PLL reset ASoC: atmel-classd: remove aclk clock ASoC: atmel-classd: remove aclk clock from DT binding clk: at91: clk-generated: make gclk determine audio_pll rate clk: at91: clk-generated: create function to find best_diff clk: at91: add audio pll clock drivers dt-bindings: clk: at91: add audio plls to the compatible list clk: at91: clk-generated: remove useless divisor loop clk: mb86s7x: Drop non-building driver clk: ti: check for null return in strrchr to avoid null dereferencing clk: Don't write error code into divider register clk: uniphier: add video input subsystem clock clk: uniphier: add audio system clock clk: stm32h7: Add stm32h743 clock driver clk: gate: expose clk_gate_ops::is_enabled clk: nxp: clk-lpc32xx: rename clk_gate_is_enabled() clk: uniphier: add PXs3 clock data clk: hi6220: change watchdog clock source clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808 clk: cs2000: Add cs2000_set_saved_rate ...
2017-09-13Merge tag 'rtc-4.14' of ↵Linus Torvalds19-475/+908
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - remove .open() and .release() RTC ops - constify i2c_device_id New driver: - Realtek RTD1295 - Android emulator (goldfish) RTC Drivers: - ds1307: Beginning of a huge cleanup - s35390a: handle invalid RTC time - sun6i: external oscillator gate support" * tag 'rtc-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (40 commits) rtc: ds1307: use octal permissions rtc: ds1307: fix braces rtc: ds1307: fix alignments and blank lines rtc: ds1307: use BIT rtc: ds1307: use u32 rtc: ds1307: use sizeof rtc: ds1307: remove regs member rtc: Add Realtek RTD1295 dt-bindings: rtc: Add Realtek RTD1295 rtc: sun6i: Add support for the external oscillator gate rtc: goldfish: Add RTC driver for Android emulator dt-bindings: Add device tree binding for Goldfish RTC driver rtc: ds1307: add basic support for ds1341 chip rtc: ds1307: remove member nvram_offset from struct ds1307 rtc: ds1307: factor out offset to struct chip_desc rtc: ds1307: factor out rtc_ops to struct chip_desc rtc: ds1307: factor out irq_handler to struct chip_desc rtc: ds1307: improve irq setup rtc: ds1307: constify struct chip_desc variables rtc: ds1307: improve trickle charger initialization ...

Privacy Policy