path: root/include/linux/firewire.h
AgeCommit message (Collapse)AuthorFilesLines
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-26ALSA: firewire/bebob: Add a workaround for M-Audio special Firewire seriesTakashi Sakamoto1-0/+3
In post commit, a quirk of this firmware about transactions is reported. This commit apply a workaround for this quirk. They often fail transactions due to gap_count mismatch. This state is changed by generating bus reset. The fw_schedule_bus_reset() is an exported symbol in firewire-core. But there are no header for public. This commit moves its prototype from drivers/firewire/core.h to include/linux/firewire.h. This mismatch still affects bus management before generating this bus reset. It still takes a time to call driver's probe() because transactions are still often failed. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-07firewire: don't use PREPARE_DELAYED_WORKTejun Heo1-0/+1
PREPARE_[DELAYED_]WORK() are being phased out. They have few users and a nasty surprise in terms of reentrancy guarantee as workqueue considers work items to be different if they don't have the same work function. firewire core-device and sbp2 have been been multiplexing work items with multiple work functions. Introduce fw_device_workfn() and sbp2_lu_workfn() which invoke fw_device->workfn and sbp2_logical_unit->workfn respectively and always use the two functions as the work functions and update the users to set the ->workfn fields instead of overriding work functions using PREPARE_DELAYED_WORK(). This fixes a variety of possible regressions since a2c1c57be8d9 "workqueue: consider work function when searching for busy work items" due to which fw_workqueue lost its required non-reentrancy property. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: linux1394-devel@lists.sourceforge.net Cc: stable@vger.kernel.org # v3.9+ Cc: stable@vger.kernel.org # v3.8.2+ Cc: stable@vger.kernel.org # v3.4.60+ Cc: stable@vger.kernel.org # v3.2.40+
2013-07-27firewire: fix libdc1394/FlyCap2 iso event regressionClemens Ladisch1-0/+1
Commit 18d627113b83 (firewire: prevent dropping of completed iso packet header data) was intended to be an obvious bug fix, but libdc1394 and FlyCap2 depend on the old behaviour by ignoring all returned information and thus not noticing that not all packets have been received yet. The result was that the video frame buffers would be saved before they contained the correct data. Reintroduce the old behaviour for old clients. Tested-by: Stepan Salenikovich <stepan.salenikovich@gmail.com> Tested-by: Josep Bosch <jep250@gmail.com> Cc: <stable@vger.kernel.org> # 3.4+ Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-06-09firewire: introduce fw_driver.probe and .remove methodsStefan Richter1-0/+2
FireWire upper layer drivers are converted from generic struct driver.probe() and .remove() to bus-specific struct fw_driver.probe() and .remove(). The new .probe() adds a const struct ieee1394_device_id *id argument, indicating the entry in the driver's device identifiers table which matched the fw_unit to be probed. This new argument is used by the snd-firewire-speakers driver to look up device-specific parameters and methods. There is at least one other FireWire audio driver currently in development in which this will be useful too. The new .remove() drops the unused error return code. Although all in-tree drivers are being converted to the new methods, support for the old methods is left in place in this commit. This allows public developer trees to merge this commit and then move to the new fw_driver methods. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Clemens Ladisch <clemens@ladisch.de> (for sound/firewire/) Cc: Peter Hurley <peter@hurleysoftware.com> (for drivers/staging/fwserial/)
2012-09-28firewire: addendum to address handler RCU conversionStefan Richter1-2/+10
Follow up on commit c285f6ff6787 "firewire: remove global lock around address handlers, convert to RCU": - address_handler_lock no longer serializes the address handler, only its function to serialize updates to the list of handlers remains. Rename the lock to address_handler_list_lock. - Callers of fw_core_remove_address_handler() must be able to sleep. Comment on this in the API documentation. - The counterpart fw_core_add_address_handler() is by nature something which is used in process context. Replace spin_lock_bh() by spin_lock() in fw_core_add_address_handler() and in fw_core_remove_address_handler(), and document that process context is now required for fw_core_add_address_handler(). - Extend the documentation of fw_address_callback_t. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-07-30Merge tag 'firewire-updates' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire updates from Stefan Richter: - Small fixes and optimizations. - A new sysfs attribute to tell local and remote nodes apart. Useful to set special permissions/ ownership of local nodes' /dev/fw*, to start daemons on them (for diagnostics, management, AV targets, VersaPHY initiator or targets...), to pick up their GUID to use it as GUID of an SBP2 target instance, and of course for informational purposes. * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: core: document is_local sysfs attribute firewire: core: add is_local sysfs device attribute firewire: ohci: initialize multiChanMode bits after reset firewire: core: fix multichannel IR with buffers larger than 2 GB firewire: ohci: sanity-check MMIO resource firewire: ohci: lazy bus time initialization firewire: core: allocate the low memory region firewire: core: make address handler length 64 bits
2012-06-30firewire: core: add is_local sysfs device attributeClemens Ladisch1-1/+1
Making this information available in sysfs allows to differentiate between controllers in the local and remote Linux PCs, and thus is useful for servers that are started with udev rules. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-05-27firewire: core: make address handler length 64 bitsClemens Ladisch1-1/+1
The type of the length field of the fw_address_handler structure was size_t, which restricted it to 32 bits on 32-bit architectures. While making it u32 would match the userspace API, all calculations on this field use 64 bits anyway, and the ability to use 4 GB or larger address ranges is useful in the kernel. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-05-24Merge tag 'firewire-updates' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull IEEE 1394 (FireWire) subsystem updates from Stefan Richter: - Fix mismatch between DMA mapping direction (was wrong) and DMA synchronization direction (was correct) of isochronous reception buffers of userspace drivers if vma-mapped for R/W access. For example, libdc1394 was affected. - more consistent retry stategy in device discovery/ rediscovery, and improved failure diagnostics - various small cleanups, e.g. use SCSI layer's DMA mapping API in firewire-sbp2 * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: sbp2: document the absence of alignment requirements firewire: sbp2: remove superfluous blk_queue_max_segment_size() call firewire: sbp2: use scsi_dma_(un)map firewire: sbp2: give correct DMA device to scsi framework firewire: core: fw_device_refresh(): clean up error handling firewire: core: log config rom reading errors firewire: core: log error in case of failed bus manager lock firewire: move rcode_string() to core firewire: core: improve reread_config_rom() interface firewire: core: wait for inaccessible devices after bus reset firewire: ohci: omit spinlock IRQ flags where possible firewire: ohci: correct signedness of a local variable firewire: core: fix DMA mapping direction firewire: use module_pci_driver
2012-05-09firewire: Move fw_card kref functions into linux/firewire.hChris Boot1-0/+14
When writing a firewire driver that doesn't deal with struct fw_device objects (e.g. it only publishes FireWire units and doesn't subscribe to them), you likely need to keep referenced to struct fw_card objects so that you can send messages to other nodes. This patch moves fw_card_put(), fw_card_get() and fw_card_release() into the public include/linux/firewire.h header instead of drivers/firewire/core.h, and adds EXPORT_SYMBOL_GPL(fw_card_release). The firewire-sbp-target module requires these so it can keep a reference to the fw_card object in order that it can fetch ORBs to execute and read/write related data and status information. Signed-off-by: Chris Boot <bootc@bootc.net> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09firewire: Add function to get speed from opaque struct fw_requestChris Boot1-0/+1
Sometimes it's useful to know the FireWire speed of the request that has just come in to a fw_address_handler callback. As struct fw_request is opaque we can't peek inside to get the speed out of the struct fw_packet that's just inside. For example, the SBP-2 spec says: "The speed at which the block write request to the MANAGEMENT_AGENT register is received shall determine the speed used by the target for all subsequent requests to read the initiator’s configuration ROM, fetch ORB’s from initiator memory or store status at the initiator’s status_FIFO. Command block ORB’s separately specify the speed for requests addressed to the data buffer or page table." [ ANSI T10/1155D Revision 4 page 53/54 ] Signed-off-by: Chris Boot <bootc@bootc.net> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-17firewire: move rcode_string() to coreClemens Ladisch1-0/+1
There is nothing audio-specific about the rcode_string() helper, so move it from snd-firewire-lib into firewire-core to allow other code to use it. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (fixed sound/firewire/cmp.c)
2012-04-17firewire: core: fix DMA mapping directionStefan Richter1-0/+1
Seen with recent libdc1394: If a client mmap()s the buffer of an isochronous reception buffer with PROT_READ|PROT_WRITE instead of just PROT_READ, firewire-core sets the wrong DMA mapping direction during buffer initialization. The fix is to split fw_iso_buffer_init() into allocation and DMA mapping and to perform the latter after both buffer and DMA context were allocated. Buffer allocation and context allocation may happen in any order, but we need the context type (reception or transmission) in order to set the DMA direction of the buffer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-04-02firewire: restore the device.h include in linux/firewire.hPaul Gortmaker1-2/+1
Commit 313162d0b838 ("device.h: audit and cleanup users in main include dir") exchanged an include <linux/device.h> for a struct *device but in actuality I misread this file when creating 313162d and it should have remained an include. There were no build regressions since all consumers were already getting device.h anyway, but make it right regardless. Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-24Merge tag 'device-for-3.4' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull <linux/device.h> avoidance patches from Paul Gortmaker: "Nearly every subsystem has some kind of header with a proto like: void foo(struct device *dev); and yet there is no reason for most of these guys to care about the sub fields within the device struct. This allows us to significantly reduce the scope of headers including headers. For this instance, a reduction of about 40% is achieved by replacing the include with the simple fact that the device is some kind of a struct. Unlike the much larger module.h cleanup, this one is simply two commits. One to fix the implicit <linux/device.h> users, and then one to delete the device.h includes from the linux/include/ dir wherever possible." * tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: device.h: audit and cleanup users in main include dir device.h: cleanup users outside of linux/include (C files)
2012-03-18firewire: allow explicit flushing of iso packet completionsClemens Ladisch1-0/+1
Extend the kernel and userspace APIs to allow reporting all currently completed isochronous packets, even if the next interrupt packet has not yet been reached. This is required to determine the status of the packets at the end of a paused or stopped stream, and useful for more precise synchronization of audio streams. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-16device.h: audit and cleanup users in main include dirPaul Gortmaker1-1/+2
The <linux/device.h> header includes a lot of stuff, and it in turn gets a lot of use just for the basic "struct device" which appears so often. Clean up the users as follows: 1) For those headers only needing "struct device" as a pointer in fcn args, replace the include with exactly that. 2) For headers not really using anything from device.h, simply delete the include altogether. 3) For headers relying on getting device.h implicitly before being included themselves, now explicitly include device.h 4) For files in which doing #1 or #2 uncovers an implicit dependency on some other header, fix by explicitly adding the required header(s). Any C files that were implicitly relying on device.h to be present have already been dealt with in advance. Total removals from #1 and #2: 51. Total additions coming from #3: 9. Total other implicit dependencies from #4: 7. As of 3.3-rc1, there were 110, so a net removal of 42 gives about a 38% reduction in device.h presence in include/* Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-22firewire: core: prefix log messages with card nameStefan Richter1-3/+0
Associate all log messages from firewire-core with the respective card because some people have more than one card. E.g. firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 1, 8 IR + 8 IT contexts, quirks 0x0 firewire_core: created device fw0: GUID 0814438400000389, S800 firewire_core: phy config: new root=ffc1, gap_count=5 firewire_core: created device fw1: GUID 0814438400000388, S800 firewire_core: created device fw2: GUID 0001d202e06800d1, S800 turns into firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 1, 8 IR + 8 IT contexts, quirks 0x0 firewire_core 0000:04:00.0: created device fw0: GUID 0814438400000389, S800 firewire_core 0000:04:00.0: phy config: new root=ffc1, gap_count=5 firewire_core 0000:05:00.0: created device fw1: GUID 0814438400000388, S800 firewire_core 0000:04:00.0: created device fw2: GUID 0001d202e06800d1, S800 This increases the module size slightly; to keep this in check, turn the former printk wrapper macros into functions. Their implementation is largely copied from driver core's dev_printk counterparts. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-01-15firewire: move fw_device reference counting from drivers to coreStefan Richter1-12/+0
fw_unit device drivers invariably need to talk to the fw_unit's parent (an fw_device) and grandparent (an fw_card). firewire-core already maintains an fw_card reference for the entire lifetime of an fw_device. Likewise, let firewire-core maintain an fw_device reference for the entire lifetime of an fw_unit so that fw_unit drivers don't have to. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma1-1/+1
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-10firewire: sbp2: parallelize login, reconnect, logoutStefan Richter1-0/+2
The struct sbp2_logical_unit.work items can all be executed in parallel but are not reentrant. Furthermore, reconnect or re-login work must be executed in a WQ_MEM_RECLAIM workqueue. Hence replace the old single-threaded firewire-sbp2 workqueue by a concurrency-managed but non-reentrant workqueue with rescuer. firewire-core already maintains one, hence use this one. In earlier versions of this change, I observed occasional failures of parallel INQUIRY to an Initio INIC-2430 FireWire 800 to dual IDE bridge. More testing indicates that parallel INQUIRY is not actually a problem, but too quick successions of logout and login + INQUIRY, e.g. a quick sequence of cable plugout and plugin, can result in failed INQUIRY. This does not seem to be something that should or could be addressed by serialization. Another dual-LU device to which I currently have access to, an OXUF924DSB FireWire 800 to dual SATA bridge with firmware from MacPower, has been successfully tested with this too. This change is beneficial to environments with two or more FireWire storage devices, especially if they are located on the same bus. Management tasks that should be performed as soon and as quickly as possible, especially reconnect, are no longer held up by tasks on other devices that may take a long time, especially login with INQUIRY and sd or sr driver probe. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-05-10firewire: optimize iso queueing by setting wake only after the last packetClemens Ladisch1-0/+1
When queueing iso packets, the run time is dominated by the two MMIO accesses that set the DMA context's wake bit. Because most drivers submit packets in batches, we can save much time by removing all but the last wakeup. The internal kernel API is changed to require a call to fw_iso_context_queue_flush() after a batch of queued packets. The user space API does not change, so one call to FW_CDEV_IOC_QUEUE_ISO must specify multiple packets to take advantage of this optimization. In my measurements, this patch reduces the time needed to queue fifty skip packets from userspace to one sixth on a 2.5 GHz CPU, or to one third at 800 MHz. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-05-10firewire: octlet AT payloads can be stack-allocatedStefan Richter1-2/+1
We do not need slab allocations anymore in order to satisfy streaming DMA mapping constraints, thanks to commit da28947e7e36 "firewire: ohci: avoid separate DMA mapping for small AT payloads". (Besides, the slab-allocated buffers that firewire-core, firewire-sbp2, and firedtv used to provide for 8-byte write and lock requests were still not fully portable since they crossed cacheline boundaries or shared a cacheline with unrelated CPU-accessed data. snd-firewire-lib got this aspect right by using an extra kmalloc/ kfree just for the 8-byte transaction buffer.) This change replaces kmalloc'ed lock transaction scratch buffers in firewire-core, firedtv, and snd-firewire-lib by local stack allocations. Perhaps the most notable result of the change is simpler locking because there is no need to serialize usages of preallocated per-device buffers anymore. Also, allocations and deallocations are simpler. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Clemens Ladisch <clemens@ladisch.de>
2011-03-21Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: core: ignore link-active bit of new nodes, fix device recognition firewire: sbp2: revert obsolete 'fix stall with "Unsolicited response"' firewire: core: increase default SPLIT_TIMEOUT value firewire: ohci: Misleading kfree in ohci.c::pci_probe/remove firewire: ohci: omit IntEvent.busReset check rom AT queueing firewire: ohci: prevent starting of iso contexts with empty queue firewire: ohci: prevent iso completion callbacks after context stop firewire: core: rename some variables firewire: nosy: should work on Power Mac G4 PCI too firewire: core: fix card->reset_jiffies overflow firewire: cdev: remove unneeded reference firewire: cdev: always wait for outbound transactions to complete firewire: cdev: remove unneeded idr_find() from complete_transaction() firewire: ohci: log dead DMA contexts
2011-03-15ALSA: add LaCie FireWire Speakers/Griffin FireWave Surround driverClemens Ladisch1-0/+7
Add a driver for two playback-only FireWire devices based on the OXFW970 chip. v2: better AMDTP API abstraction; fix fw_unit leak; small fixes v3: cache the iPCR value v4: FireWave constraints; fix fw_device reference counting; fix PCR caching; small changes and fixes v5: volume/mute support; fix crashing due to pcm stop races v6: fix build; one-channel volume for LaCie v7: use signed values to make volume (range checks) work; fix function block IDs for volume/mute; always use channel 0 for LaCie volume Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Tested-by: Jay Fenlason <fenlason@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-23firewire: core: fix card->reset_jiffies overflowClemens Ladisch1-1/+1
On a 32-bit machine with, e.g., HZ=1000, jiffies will overflow after about 50 days, so if there are between 25 and 50 days between bus resets, the card->reset_jiffies comparisons can get wrong results. To fix this, ensure that this timestamp always uses 64 bits. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: "Stefan Richter" <stefanr@s5r6.in-berlin.de>
2011-01-04firewire: use split transaction timeout only for split transactionsClemens Ladisch1-1/+1
Instead of starting the split transaction timeout timer when any request is submitted, start it only when the destination's ACK_PENDING has been received. This prevents us from using a timeout that is too short, and, if the controller's AT queue is emptying very slowly, from cancelling a packet that has not yet been sent. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-29firewire: add isochronous multichannel receptionStefan Richter1-10/+19
This adds the DMA context programming and userspace ABI for multichannel reception, i.e. for listening on multiple channel numbers by means of a single DMA context. The use case is reception of more streams than there are IR DMA units offered by the link layer. This is already implemented by the older ohci1394 + ieee1394 + raw1394 stack. And as discussed recently on linux1394-devel, this feature is occasionally used in practice. The big drawbacks of this mode are that buffer layout and interrupt generation necessarily differ from single-channel reception: Headers and trailers are not stripped from packets, packets are not aligned with buffer chunks, interrupts are per buffer chunk, not per packet. These drawbacks also cause a rather hefty code footprint to support this rarely used OHCI-1394 feature. (367 lines added, among them 94 lines of added userspace ABI documentation.) This implementation enforces that a multichannel reception context may only listen to channels to which no single-channel context on the same link layer is presently listening to. OHCI-1394 would allow to overlay single-channel contexts by the multi-channel context, but this would be a departure from the present first-come-first-served policy of IR context creation. The implementation is heavily based on an earlier one by Jay Fenlason. Thanks Jay. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-23firewire: cdev: add PHY packet receptionStefan Richter1-1/+2
Add an FW_CDEV_IOC_RECEIVE_PHY_PACKETS ioctl() and FW_CDEV_EVENT_PHY_PACKET_RECEIVED poll()/read() event for /dev/fw*. This can be used to get information from remote PHYs by remote access PHY packets. This is also the 2nd half of the functionality (the receive part) to support a userspace implementation of a VersaPHY transaction layer. Safety considerations: - PHY packets are generally broadcasts, hence some kind of elevated privileges should be required of a process to be able to listen in on PHY packets. This implementation assumes that a process that is allowed to open the /dev/fw* of a local node does have this privilege. There was an inconclusive discussion about introducing POSIX capabilities as a means to check for user privileges for these kinds of operations. Other limitations: - PHY packet reception may be switched on by ioctl() but cannot be switched off again. It would be trivial to provide an off switch, but this is not worth the code. The client should simply close() the fd then, or just ignore further events. - For sake of simplicity of API and kernel-side implementation, no filter per packet content is provided. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-23firewire: normalize status values in packet callbacksStefan Richter1-4/+4
core-transaction.c transmit_complete_callback() and close_transaction() expect packet callback status to be an ACK or RCODE, and ACKs get translated to RCODEs for transaction callbacks. An old comment on the packet callback API (been there from the initial submission of the stack) and the dummy_driver implementation of send_request/send_response deviated from this as they also included -ERRNO in the range of status values. Let's narrow status values down to ACK and RCODE to prevent surprises. RCODE_CANCELLED is chosen as the dummy_driver's RCODE as its meaning of "transaction timed out" comes closest to what happens when a transaction coincides with card removal. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-13firewire: core: integrate software-forced bus resets with bus managementStefan Richter1-2/+4
Bus resets which are triggered - by the kernel drivers after updates of the local nodes' config ROM, - by userspace software via ioctl shall be deferred until after >=2 seconds after the last bus reset. If multiple modifications of the local nodes' config ROM happen in a row, only a single bus reset should happen after them. When the local node's link goes from inactive to active or vice versa, and at the two occasions of bus resets mentioned above --- and if the current gap count differs from 63 --- the bus reset should be preceded by a PHY configuration packet that reaffirms the gap count. Otherwise a bus manager would have to reset the bus again right after that. This is necessary to promote bus stability, e.g. leave grace periods for allocations and reallocations of isochronous channels and bandwidth, SBP-2 reconnections etc.; see IEEE 1394 clause 8.2.1. This change implements all of the above by moving bus reset initiation into a delayed work (except for bus resets which are triggered by the bus manager workqueue job and are performed there immediately). It comes with a necessary addition to the card driver methods that allows to get the current gap count from PHY registers. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-08firewire: cdev: fix fw_cdev_event_bus_reset.bm_node_idStefan Richter1-0/+1
Fix an obscure ABI feature that is a bit of a hassle to implement. However, somebody put it into the ABI, so let's fill in a sensible value there. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-06-20firewire: remove an unused function argumentStefan Richter1-1/+1
void (*fw_address_callback_t)(..., int speed, ...) is the speed that a remote node chose to transmit a request to us. In case of split transactions, firewire-core will transmit the response at that speed. Upper layer drivers on the other hand (firewire-net, -sbp2, firedtv, and userspace drivers) cannot do anything useful with that speed datum, except log it for debug purposes. But data that is merely potentially (not even actually) used for debug purposes does not belong into the API. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-06-19firewire: normalize STATE_CLEAR/SET CSR access interfaceStefan Richter1-2/+1
Push the maintenance of STATE_CLEAR/SET.abdicate down into the card driver. This way, the read/write_csr_reg driver method works uniformly across all CSR offsets. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-06-19firewire: replace get_features card driver hookStefan Richter1-0/+3
by feature variables in the fw_card struct. The hook appeared to be an unnecessary abstraction in the card driver interface. Cleaner would be to pass those feature flags as arguments to fw_card_initialize() or fw_card_add(), but the FairnessControl register is in the SCLK domain and may therefore not be accessible while Link Power Status is off, i.e. before the card->driver->enable call from fw_card_add(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-06-10firewire: core: add CSR abdicate supportClemens Ladisch1-0/+2
Implement the abdicate bit, which is required for bus manager capable nodes and tested by the Base 1394 Test Suite. Finally, something to do at a command reset! :-) Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2010-06-10firewire: core: add CSR MAINT_UTILITY supportClemens Ladisch1-0/+3
Implement the MAIN_UTILITY register, which is utterly optional but useful as a safe target for diagnostic read/write/broadcast transactions. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2010-06-10firewire: add CSR PRIORITY_BUDGET supportClemens Ladisch1-0/+1
If supported by the OHCI controller, implement the PRIORITY_BUDGET register, which is required for nodes that can use asynchronous priority arbitration. To allow the core to determine what features the lowlevel device supports, add a new card driver callback. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2010-06-10firewire: core: add CSR SPLIT_TIMEOUT supportClemens Ladisch1-0/+5
Implement the SPLIT_TIMEOUT registers. Besides being required by the spec, this is desirable for some IIDC devices and necessary for many audio devices to be able to increase the timeout from userspace. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2010-05-19firewire: core: use separate timeout for each transactionClemens Ladisch1-1/+2
Using a single timeout for all transaction that need to be flushed does not work if the submission of new transactions can defer the timeout indefinitely into the future. We need to have timeouts that do not change due to other transactions; the simplest way to do this is with a separate timer for each transaction. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (+ one lockdep annotation)
2010-04-19firewire: core: clean up config ROM related defined constantsStefan Richter1-2/+0
Clemens Ladisch pointed out that - BIB_IMC is not named like the field is called in the standard, - readers of the code may get worried about the magic 0x0c0083c0, - a CSR_NODE_CAPABILITIES key is there in the header but not put to good use. So let's rename BIB_IMC, add a defined constant for Node_Capabilities and a comment which reassures people that somebody thought about it and they don't have to (or if they still do, tell them where they have to look for confirmation), and prune our incomplete and arbitrary set of defined constants of CSR key IDs. And there is a nother magic number, that of Bus_Information_Block.Bus_Name, to be defined and commented. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-29firewire: qualify config ROM cache pointers as const pointersStefan Richter1-6/+6
Several config ROM related functions only peek at the ROM cache; mark their arguments as const pointers. Ditto fw_device.config_rom and fw_unit.directory, as the memory behind them is meant to be write-once. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-29firewire: core: fw_csr_string addendumStefan Richter1-1/+0
Witespace and comment changes, and a different way to say i + 1 < end. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-29firewire: add fw_csr_string() helper functionClemens Ladisch1-0/+2
The core (sysfs attributes), the firedtv driver, and possible future drivers all read strings from some configuration ROM directory. Factor out the generic code from show_text_leaf() into a new helper function, modified slightly to handle arbitrary buffer sizes. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-29firewire: fix use of multiple AV/C devices, allow multiple FCP listenersClemens Ladisch1-2/+2
Control of more than one AV/C device at once --- e.g. camcorders, tape decks, audio devices, TV tuners --- failed or worked only unreliably, depending on driver implementation. This affected kernelspace and userspace drivers alike and was caused by firewire-core's inability to accept multiple registrations of FCP listeners. The fix allows multiple address handlers to be registered for the FCP command and response registers. When a request for these registers is received, all handlers are invoked, and the Firewire response is generated by the core and not by any handler. The cdev API does not change, i.e., userspace is still expected to send a response for FCP requests; this response is silently ignored. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (changelog, rebased, whitespace)
2009-10-31firewire: ohci: 0 may be a valid DMA addressStefan Richter1-0/+1
I was told that there are obscure architectures with non-coherent DMA which may DMA-map to bus address 0. We shall not use 0 as a magic number of uninitialized bus address variables. The packet->payload_length > 0 test cannot be used either (except in at_context_queue_packet) because local requests are not DMA-mapped regardless of payload_length. Hence add a state flag to struct fw_packet. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14firewire: core: optimize Topology Map creationStefan Richter1-1/+1
The Topology Map of the local node was created in CPU byte order, then a temporary big endian copy was created to compute the CRC, and when a read request to the Topology Map arrived it had to be converted to big endian byte order again. We now generate it in big endian byte order in the first place. This also rids us of 1000 bytes stack usage in tasklet context. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14firewire: optimize config ROM creationStefan Richter1-14/+0
The config ROM image of the local node was created in CPU byte order, then a temporary big endian copy was created to compute the CRC, and finally the card driver created its own big endian copy. We now generate it in big endian byte order in the first place to avoid one byte order conversion and the temporary on-stack copy of the ROM image (1000 bytes stack usage in process context). Furthermore, two 1000 bytes memset()s are replaced by one 1000 bytes - ROM length sized memset. The trivial fw_memcpy_{from,to}_be32() helpers are now superfluous and removed. The newly added __compute_block_crc() function will be folded into fw_compute_block_crc() in a subsequent change. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-12firewire: core: header file cleanupStefan Richter1-14/+0
fw_card_get, fw_card_put, fw_card_release are currently not exported for use outside the firewire-core. Move their definitions/ declarations from the subsystem header file to the core header file. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

Privacy Policy