aboutsummaryrefslogtreecommitdiffstats
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2015-08-07MODSIGN: Provide a utility to append a PKCS#7 signature to a moduleDavid Howells1-0/+1
Provide a utility that: (1) Digests a module using the specified hash algorithm (typically sha256). [The digest can be dumped into a file by passing the '-d' flag] (2) Generates a PKCS#7 message that: (a) Has detached data (ie. the module content). (b) Is signed with the specified private key. (c) Refers to the specified X.509 certificate. (d) Has an empty X.509 certificate list. [The PKCS#7 message can be dumped into a file by passing the '-p' flag] (3) Generates a signed module by concatenating the old module, the PKCS#7 message, a descriptor and a magic string. The descriptor contains the size of the PKCS#7 message and indicates the id_type as PKEY_ID_PKCS7. (4) Either writes the signed module to the specified destination or renames it over the source module. This allows module signing to reuse the PKCS#7 handling code that was added for PE file parsing for signed kexec. Note that the utility is written in C and must be linked against the OpenSSL crypto library. Note further that I have temporarily dropped support for handling externally created signatures until we can work out the best way to do those. Hopefully, whoever creates the signature can give me a PKCS#7 certificate. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Vivek Goyal <vgoyal@redhat.com>
2015-08-07PKCS#7: Allow detached data to be supplied for signature checking purposesDavid Howells1-0/+3
It is possible for a PKCS#7 message to have detached data. However, to verify the signatures on a PKCS#7 message, we have to be able to digest the data. Provide a function to supply that data. An error is given if the PKCS#7 message included embedded data. This is used in a subsequent patch to supply the data to module signing where the signature is in the form of a PKCS#7 message with detached data, whereby the detached data is the module content that is signed. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Vivek Goyal <vgoyal@redhat.com>
2015-08-07X.509: Support X.509 lookup by Issuer+Serial form AuthorityKeyIdentifierDavid Howells1-1/+2
If an X.509 certificate has an AuthorityKeyIdentifier extension that provides an issuer and serialNumber, then make it so that these are used in preference to the keyIdentifier field also held therein for searching for the signing certificate. If both the issuer+serialNumber and the keyIdentifier are supplied, then the certificate is looked up by the former but the latter is checked as well. If the latter doesn't match the subjectKeyIdentifier of the parent certificate, EKEYREJECTED is returned. This makes it possible to chain X.509 certificates based on the issuer and serialNumber fields rather than on subjectKeyIdentifier. This is necessary as we are having to deal with keys that are represented by X.509 certificates that lack a subjectKeyIdentifier. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Vivek Goyal <vgoyal@redhat.com>
2015-08-07Merge tag 'asn1-fixes-20150805' of ↵James Morris1-5/+11
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into next
2015-08-05ASN.1: Handle 'ANY OPTIONAL' in grammarDavid Howells1-6/+11
An ANY object in an ASN.1 grammar that is marked OPTIONAL should be skipped if there is no more data to be had. This can be tested by editing X.509 certificates or PKCS#7 messages to remove the NULL from subobjects that look like the following: SEQUENCE { OBJECT(2a864886f70d01010b); NULL(); } This is an algorithm identifier plus an optional parameter. The modified DER can be passed to one of: keyctl padd asymmetric "" @s </tmp/modified.x509 keyctl padd pkcs7_test foo @s </tmp/modified.pkcs7 It should work okay with the patch and produce EBADMSG without. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-08-05ASN.1: Fix actions on CHOICE elements with IMPLICIT tagsDavid Howells1-1/+2
In an ASN.1 description where there is a CHOICE construct that contains elements with IMPLICIT tags that refer to constructed types, actions to be taken on those elements should be conditional on the corresponding element actually being matched. Currently, however, such actions are performed unconditionally in the middle of processing the CHOICE. For example, look at elements 'b' and 'e' here: A ::= SEQUENCE { CHOICE { b [0] IMPLICIT B ({ do_XXXXXXXXXXXX_b }), c [1] EXPLICIT C ({ do_XXXXXXXXXXXX_c }), d [2] EXPLICIT B ({ do_XXXXXXXXXXXX_d }), e [3] IMPLICIT C ({ do_XXXXXXXXXXXX_e }), f [4] IMPLICIT INTEGER ({ do_XXXXXXXXXXXX_f }) } } ({ do_XXXXXXXXXXXX_A }) B ::= SET OF OBJECT IDENTIFIER ({ do_XXXXXXXXXXXX_oid }) C ::= SET OF INTEGER ({ do_XXXXXXXXXXXX_int }) They each have an action (do_XXXXXXXXXXXX_b and do_XXXXXXXXXXXX_e) that should only be processed if that element is matched. The problem is that there's no easy place to hang the action off in the subclause (type B for element 'b' and type C for element 'e') because subclause opcode sequences can be shared. To fix this, introduce a conditional action opcode(ASN1_OP_MAYBE_ACT) that the decoder only processes if the preceding match was successful. This can be seen in an excerpt from the output of the fixed ASN.1 compiler for the above ASN.1 description: [ 13] = ASN1_OP_COND_MATCH_JUMP_OR_SKIP, // e [ 14] = _tagn(CONT, CONS, 3), [ 15] = _jump_target(45), // --> C [ 16] = ASN1_OP_MAYBE_ACT, [ 17] = _action(ACT_do_XXXXXXXXXXXX_e), In this, if the op at [13] is matched (ie. element 'e' above) then the action at [16] will be performed. However, if the op at [13] doesn't match or is skipped because it is conditional and some previous op matched, then the action at [16] will be ignored. Note that to make this work in the decoder, the ASN1_OP_RETURN op must set the flag to indicate that a match happened. This is necessary because the _jump_target() seen above introduces a subclause (in this case an object of type 'C') which is likely to alter the flag. Setting the flag here is okay because to process a subclause, a match must have happened and caused a jump. This cannot be tested with the code as it stands, but rather affects future code. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-07-28Yama: remove needless CONFIG_SECURITY_YAMA_STACKEDKees Cook1-2/+4
Now that minor LSMs can cleanly stack with major LSMs, remove the unneeded config for Yama to be made to explicitly stack. Just selecting the main Yama CONFIG will allow it to work, regardless of the major LSM. Since distros using Yama are already forcing it to stack, this is effectively a no-op change. Additionally add MAINTAINERS entry. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: James Morris <james.l.morris@oracle.com>
2015-07-20Merge tag 'seccomp-next' of ↵James Morris3-3/+6
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into next
2015-07-18Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-2/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Two families of fixes: - Fix an FPU context related boot crash on newer x86 hardware with larger context sizes than what most people test. To fix this without ugly kludges or extensive reverts we had to touch core task allocator, to allow x86 to determine the task size dynamically, at boot time. I've tested it on a number of x86 platforms, and I cross-built it to a handful of architectures: (warns) (warns) testing x86-64: -git: pass ( 0), -tip: pass ( 0) testing x86-32: -git: pass ( 0), -tip: pass ( 0) testing arm: -git: pass ( 1359), -tip: pass ( 1359) testing cris: -git: pass ( 1031), -tip: pass ( 1031) testing m32r: -git: pass ( 1135), -tip: pass ( 1135) testing m68k: -git: pass ( 1471), -tip: pass ( 1471) testing mips: -git: pass ( 1162), -tip: pass ( 1162) testing mn10300: -git: pass ( 1058), -tip: pass ( 1058) testing parisc: -git: pass ( 1846), -tip: pass ( 1846) testing sparc: -git: pass ( 1185), -tip: pass ( 1185) ... so I hope the cross-arch impact 'none', as intended. (by Dave Hansen) - Fix various NMI handling related bugs unearthed by the big asm code rewrite and generally make the NMI code more robust and more maintainable while at it. These changes are a bit late in the cycle, I hope they are still acceptable. (by Andy Lutomirski)" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86 x86/fpu, sched: Dynamically allocate 'struct fpu' x86/entry/64, x86/nmi/64: Add CONFIG_DEBUG_ENTRY NMI testing code x86/nmi/64: Make the "NMI executing" variable more consistent x86/nmi/64: Minor asm simplification x86/nmi/64: Use DF to avoid userspace RSP confusing nested NMI detection x86/nmi/64: Reorder nested NMI checks x86/nmi/64: Improve nested NMI comments x86/nmi/64: Switch stacks on userspace NMI entry x86/nmi/64: Remove asm code that saves CR2 x86/nmi: Enable nested do_nmi() handling for 64-bit kernels
2015-07-18x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it ↵Ingo Molnar1-1/+5
on x86 Don't burden architectures without dynamic task_struct sizing with the overhead of dynamic sizing. Also optimize the x86 code a bit by caching task_struct_size. Acked-and-Tested-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1437128892-9831-3-git-send-email-mingo@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-18x86/fpu, sched: Dynamically allocate 'struct fpu'Dave Hansen1-2/+10
The FPU rewrite removed the dynamic allocations of 'struct fpu'. But, this potentially wastes massive amounts of memory (2k per task on systems that do not have AVX-512 for instance). Instead of having a separate slab, this patch just appends the space that we need to the 'task_struct' which we dynamically allocate already. This saves from doing an extra slab allocation at fork(). The only real downside here is that we have to stick everything and the end of the task_struct. But, I think the BUILD_BUG_ON()s I stuck in there should keep that from being too fragile. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1437128892-9831-2-git-send-email-mingo@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-17mm/page_owner: set correct gfp_mask on page_ownerJoonsoo Kim1-0/+13
Currently, we set wrong gfp_mask to page_owner info in case of isolated freepage by compaction and split page. It causes incorrect mixed pageblock report that we can get from '/proc/pagetypeinfo'. This metric is really useful to measure fragmentation effect so should be accurate. This patch fixes it by setting correct information. Without this patch, after kernel build workload is finished, number of mixed pageblock is 112 among roughly 210 movable pageblocks. But, with this fix, output shows that mixed pageblock is just 57. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17mm: clean up per architecture MM hook header filesLaurent Dufour1-0/+16
Commit 2ae416b142b6 ("mm: new mm hook framework") introduced an empty header file (mm-arch-hooks.h) for every architecture, even those which doesn't need to define mm hooks. As suggested by Geert Uytterhoeven, this could be cleaned through the use of a generic header file included via each per architecture asm/include/Kbuild file. The PowerPC architecture is not impacted here since this architecture has to defined the arch_remap MM hook. Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Vineet Gupta <vgupta@synopsys.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17Update Viresh Kumar's email addressViresh Kumar2-2/+2
Switch to my kernel.org alias instead of a badly named gmail address, which I rarely use. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17include, lib: add __printf attributes to several function prototypesNicolas Iooss11-28/+33
Using __printf attributes helps to detect several format string issues at compile time (even though -Wformat-security is currently disabled in Makefile). For example it can detect when formatting a pointer as a number, like the issue fixed in commit a3fa71c40f18 ("wl18xx: show rx_frames_per_rates as an array as it really is"), or when the arguments do not match the format string, c.f. for example commit 5ce1aca81435 ("reiserfs: fix __RASSERT format string"). To prevent similar bugs in the future, add a __printf attribute to every function prototype which needs one in include/linux/ and lib/. These functions were mostly found by using gcc's -Wsuggest-attribute=format flag. Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Felipe Balbi <balbi@ti.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17mm: hugetlb: allow hugepages_supported to be architecture specificDominik Dingel1-9/+8
s390 has a constant hugepage size, by setting HPAGE_SHIFT we also change e.g. the pageblock_order, which should be independent in respect to hugepage support. With this patch every architecture is free to define how to check for hugepage support. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17Merge tag 'staging-4.2-rc3' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver fixes from Greg KH: "Here's some staging and IIO driver fixes for 4.2-rc3. Nothing major, the majority are IIO issues that were reported, with a few other minor staging driver fixes. All have been in linux-next for a while with no reported issues" * tag 'staging-4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (25 commits) staging: vt6656: check ieee80211_bss_conf bssid not NULL staging: vt6655: check ieee80211_bss_conf bssid not NULL staging:lustre: remove irq.h from socklnd.h staging: make board support depend on OF_IRQ and CLKDEV_LOOKUP iio: tmp006: Check channel info on write iio: sx9500: Add missing init in sx9500_buffer_pre{en,dis}able() iio:light:ltr501: fix regmap dependency iio:light:ltr501: fix variable in ltr501_init iio: sx9500: fix bug in compensation code iio: sx9500: rework error handling of raw readings iio: magnetometer: mmc35240: fix available sampling frequencies iio:light:stk3310: Fix REGMAP_I2C dependency iio: light: STK3310: un-invert proximity values iio:adc:cc10001_adc: fix Kconfig dependency iio: light: tcs3414: Fix bug preventing to set integration time iio:accel:bmc150-accel: fix counting direction iio:light:cm3323: clear bitmask before set iio: adc: at91_adc: allow to use full range of startup time iio: DAC: ad5624r_spi: fix bit shift of output data value iio: proximity: sx9500: Fix proximity value ...
2015-07-17Merge tag 'gpio-v4.2-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "This is a first set of GPIO fixes for the v4.2 series, all hitting individual drivers and nothing else (except for a documentation oneliner. I intended to send a request earlier but life intervened)" * tag 'gpio-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: pca953x: fix nested irqs rescheduling gpio: omap: prevent module from being unloaded while in use gpio: max732x: Add missing dev reference to gpiochip gpio/xilinx: Use correct address when setting initial values. gpio: zynq: Fix problem with unbalanced pm_runtime_enable gpio: omap: add missed spin_unlock_irqrestore in omap_gpio_irq_type gpio: brcmstb: fix null ptr dereference in driver remove gpio: Remove double "base" in comment
2015-07-16Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds1-8/+3
Pull block fixes from Jens Axboe: "A collection of fixes from the last few weeks that should go into the current series. This contains: - Various fixes for the per-blkcg policy data, fixing regressions since 4.1. From Arianna and Tejun - Code cleanup for bcache closure macros from me. Really just flushing this out, it's been sitting in another branch for months - FIELD_SIZEOF cleanup from Maninder Singh - bio integrity oops fix from Mike - Timeout regression fix for blk-mq from Ming Lei" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq: set default timeout as 30 seconds NVMe: Reread partitions on metadata formats bcache: don't embed 'return' statements in closure macros blkcg: fix blkcg_policy_data allocation bug blkcg: implement all_blkcgs list blkcg: blkcg_css_alloc() should grab blkcg_pol_mutex while iterating blkcg_policy[] blkcg: allow blkcg_pol_mutex to be grabbed from cgroup [file] methods block/blk-cgroup.c: free per-blkcg data when freeing the blkcg block: use FIELD_SIZEOF to calculate size of a field bio integrity: do not assume bio_integrity_pool exists if bioset exists
2015-07-15Merge tag 'for-linus' of ↵Linus Torvalds2-3/+18
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "Mainly fix-ups for the various 4.2 items" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (24 commits) IB/core: Destroy ocrdma_dev_id IDR on module exit IB/core: Destroy multcast_idr on module exit IB/mlx4: Optimize do_slave_init IB/mlx4: Fix memory leak in do_slave_init IB/mlx4: Optimize freeing of items on error unwind IB/mlx4: Fix use of flow-counters for process_mad IB/ipath: Convert use of __constant_<foo> to <foo> IB/ipoib: Set MTU to max allowed by mode when mode changes IB/ipoib: Scatter-Gather support in connected mode IB/ucm: Fix bitmap wrap when devnum > IB_UCM_MAX_DEVICES IB/ipoib: Prevent lockdep warning in __ipoib_ib_dev_flush IB/ucma: Fix lockdep warning in ucma_lock_files rds: rds_ib_device.refcount overflow RDMA/nes: Fix for incorrect recording of the MAC address RDMA/nes: Fix for resolving the neigh RDMA/core: Fixes for port mapper client registration IB/IPoIB: Fix bad error flow in ipoib_add_port() IB/mlx4: Do not attemp to report HCA clock offset on VFs IB/cm: Do not queue work to a device that's going away IB/srp: Avoid using uninitialized variable ...
2015-07-16gpio: Remove double "base" in commentGeert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-15Merge tag 'locks-v4.2-1' of git://git.samba.org/jlayton/linuxLinus Torvalds1-10/+20
Pull file locking updates from Jeff Layton: "I had thought that I was going to get away without a pull request this cycle. There was a NFSv4 file locking problem that cropped up that I tried to fix in the NFSv4 code alone, but that fix has turned out to be problematic. These patches fix this in the correct way. Note that this touches some NFSv4 code as well. Ordinarily I'd wait for Trond to ACK this, but he's on holiday right now and the bug is rather nasty. So I suggest we merge this and if he raises issues with it we can sort it out when he gets back" Acked-by: Bruce Fields <bfields@fieldses.org> Acked-by: Dan Williams <dan.j.williams@intel.com> [ +1 to this series fixing a 100% reproducible slab corruption + general protection fault in my nfs-root test environment. - Dan ] Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com> * tag 'locks-v4.2-1' of git://git.samba.org/jlayton/linux: locks: inline posix_lock_file_wait and flock_lock_file_wait nfs4: have do_vfs_lock take an inode pointer locks: new helpers - flock_lock_inode_wait and posix_lock_inode_wait locks: have flock_lock_file take an inode pointer instead of a filp Revert "nfs: take extra reference to fl->fl_file when running a LOCKU operation"
2015-07-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+18
Pull KVM fixes from Paolo Bonzini: - Fix FPU refactoring ("kvm: x86: fix load xsave feature warning") - Fix eager FPU mode (Cc stable) - AMD bits of MTRR virtualization * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: x86: fix load xsave feature warning KVM: x86: apply guest MTRR virtualization on host reserved pages KVM: SVM: Sync g_pat with guest-written PAT value KVM: SVM: use NPT page attributes KVM: count number of assigned devices KVM: VMX: fix vmwrite to invalid VMCS KVM: x86: reintroduce kvm_is_mmio_pfn x86: hyperv: add CPUID bit for crash handlers
2015-07-15seccomp: swap hard-coded zeros to defined nameKees Cook1-1/+1
For clarity, if CONFIG_SECCOMP isn't defined, seccomp_mode() is returning "disabled". This makes that more clear, along with another 0-use, and results in no operational change. Signed-off-by: Kees Cook <keescook@chromium.org>
2015-07-15seccomp: add ptrace options for suspend/resumeTycho Andersen2-2/+5
This patch is the first step in enabling checkpoint/restore of processes with seccomp enabled. One of the things CRIU does while dumping tasks is inject code into them via ptrace to collect information that is only available to the process itself. However, if we are in a seccomp mode where these processes are prohibited from making these syscalls, then what CRIU does kills the task. This patch adds a new ptrace option, PTRACE_O_SUSPEND_SECCOMP, that enables a task from the init user namespace which has CAP_SYS_ADMIN and no seccomp filters to disable (and re-enable) seccomp filters for another task so that they can be successfully dumped (and restored). We restrict the set of processes that can disable seccomp through ptrace because although today ptrace can be used to bypass seccomp, there is some discussion of closing this loophole in the future and we would like this patch to not depend on that behavior and be future proofed for when it is removed. Note that seccomp can be suspended before any filters are actually installed; this behavior is useful on criu restore, so that we can suspend seccomp, restore the filters, unmap our restore code from the restored process' address space, and then resume the task by detaching and have the filters resumed as well. v2 changes: * require that the tracer have no seccomp filters installed * drop TIF_NOTSC manipulation from the patch * change from ptrace command to a ptrace option and use this ptrace option as the flag to check. This means that as soon as the tracer detaches/dies, seccomp is re-enabled and as a corrollary that one can not disable seccomp across PTRACE_ATTACHs. v3 changes: * get rid of various #ifdefs everywhere * report more sensible errors when PTRACE_O_SUSPEND_SECCOMP is incorrectly used v4 changes: * get rid of may_suspend_seccomp() in favor of a capable() check in ptrace directly v5 changes: * check that seccomp is not enabled (or suspended) on the tracer Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com> CC: Will Drewry <wad@chromium.org> CC: Roland McGrath <roland@hack.frob.com> CC: Pavel Emelyanov <xemul@parallels.com> CC: Serge E. Hallyn <serge.hallyn@ubuntu.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Andy Lutomirski <luto@amacapital.net> [kees: access seccomp.mode through seccomp_mode() instead] Signed-off-by: Kees Cook <keescook@chromium.org>
2015-07-15Merge tag 'module-final-v4.2-rc1' of ↵Linus Torvalds2-78/+84
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull final init.h/module.h code relocation from Paul Gortmaker: "With the release of 4.2-rc2 done, we should not be seeing any new code added that gets upset by this small code move, and we've banked yet another complete week of testing with this move in place on top of 4.2-rc1 via linux-next to ensure that remained true. Given that, I'd like to put it in now so that people formulating new work for 4.3-rc1 will be exposed to the ever so slightly stricter (but sensible) requirements wrt. whether they are needing init.h vs. module.h macros, even if they are not using linux-next. The diffstat of the move is slightly asymmetrical due to needing to leave behind a couple #ifdef in the old location and add the same ones to the new location, but other than that, it is a 1:1 move, complete with the module_init/exit trailing semicolon that we can't fix. That is, until/unless someone does a tree-wide sed fix of all the approximately 800 currently in tree users relying on it" * tag 'module-final-v4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: module: relocate module_init from init.h to module.h
2015-07-14IB/srp: Avoid using uninitialized variableSagi Grimberg1-0/+1
We might return res which is not initialized. Also reduce code duplication by exporting srp_parse_tmo so srp_tmo_set can reuse it. Detected by Coverity. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jenny Falkovich <jennyf@mellanox.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB: Add rdma_cap_ib_switch helper and use where appropriateHal Rosenstock1-3/+17
Persuant to Liran's comments on node_type on linux-rdma mailing list: In an effort to reform the RDMA core and ULPs to minimize use of node_type in struct ib_device, an additional bit is added to struct ib_device for is_switch (IB switch). This is needed to be initialized by any IB switch device driver. This is a NEW requirement on such device drivers which are all "out of tree". In addition, an ib_switch helper was added to ib_verbs.h based on the is_switch device bit rather than node_type (although those should be consistent). The RDMA core (MAD, SMI, agent, sa_query, multicast, sysfs) as well as (IPoIB and SRP) ULPs are updated where appropriate to use this new helper. In some cases, the helper is now used under the covers of using rdma_[start end]_port rather than the open coding previously used. Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Hal Rosenstock <hal@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-13Merge tag 'iio-fixes-for-4.2a' of ↵Greg Kroah-Hartman1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First set of IIO fixes for the 4.2 cycle. * Fix a regression in hid sensors suspend time as a result of adding runtime pm. The normal flow of waking up devices in order to go into suspend (given the devices are normally suspended when not reading) to a regression in suspend time on some laptops (reports of an additional 8 seconds). Fix this by checking to see if a user action resulting in the wake up, and make it a null operation if it didn't. Note that for hid sensors, there is nothing useful to be done when moving into a full suspend from a runtime suspend so they might as well be left alone. * rochip_saradc: fix some missing MODULE_* data including the licence so that the driver does not taint the kernel incorrectly and can build as a module. * twl4030 - mark irq as oneshot as it always should have been. * inv-mpu - write formats for attributes not specified, leading to miss interpretation of the gyro scale channel when written. * Proximity ABI clarification. This had snuck through as a mess. Some drivers thought proximity went in one direction, some the other. We went with the most common option, documented it and fixed up the drivers going the other way. Fix for sx9500 included in this set. * ad624r - fix a wrong shift in the output data. * at91_adc - remove a false limit on the value of the STARTUP register applied by too small a type for the device tree parameter. * cm3323 - clear the bits when setting the integration time (otherwise we can only ever set more bits in the relevant field). * bmc150-accel - multiple triggers are registered, but on error were not being unwound in the opposite order leading to removal of triggers that had not yet successfully been registered (count down instead of up when unwinding). * tcs3414 - ensure right part of val / val2 pair read so that the integration time is not always 0. * cc10001_adc - bug in kconfig dependency. Use of OR when AND was intended.
2015-07-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds3-1/+9
Pull networking fixes from David Miller: 1) Missing list head init in bluetooth hidp session creation, from Tedd Ho-Jeong An. 2) Don't leak SKB in bridge netfilter error paths, from Florian Westphal. 3) ipv6 netdevice private leak in netfilter bridging, fixed by Julien Grall. 4) Fix regression in IP over hamradio bpq encapsulation, from Ralf Baechle. 5) Fix race between rhashtable resize events and table walks, from Phil Sutter. 6) Missing validation of IFLA_VF_INFO netlink attributes, fix from Daniel Borkmann. 7) Missing security layer socket state initialization in tipc code, from Stephen Smalley. 8) Fix shared IRQ handling in boomerang 3c59x interrupt handler, from Denys Vlasenko. 9) Missing minor_idr destroy on module unload on macvtap driver, from Johannes Thumshirn. 10) Various pktgen kernel thread races, from Oleg Nesterov. 11) Fix races that can cause packets to be processed in the backlog even after a device attached to that SKB has been fully unregistered. From Julian Anastasov. 12) bcmgenet driver doesn't account packet drops vs. errors properly, fix from Petri Gynther. 13) Array index validation and off by one fix in DSA layer from Florian Fainelli * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (66 commits) can: replace timestamp as unique skb attribute ARM: dts: dra7x-evm: Prevent glitch on DCAN1 pinmux can: c_can: Fix default pinmux glitch at init can: rcar_can: unify error messages can: rcar_can: print request_irq() error code can: rcar_can: fix typo in error message can: rcar_can: print signed IRQ # can: rcar_can: fix IRQ check net: dsa: Fix off-by-one in switch address parsing net: dsa: Test array index before use net: switchdev: don't abort unsupported operations net: bcmgenet: fix accounting of packet drops vs errors cdc_ncm: update specs URL Doc: z8530book: Fix typo in API-z8530-sync-txdma-open.html net: inet_diag: always export IPV6_V6ONLY sockopt for listening sockets bridge: mdb: allow the user to delete mdb entry if there's a querier net: call rcu_read_lock early in process_backlog net: do not process device backlog during unregistration bridge: fix potential crash in __netdev_pick_tx() net: axienet: Fix devm_ioremap_resource return value check ...
2015-07-13locks: inline posix_lock_file_wait and flock_lock_file_waitJeff Layton1-18/+14
They just call file_inode and then the corresponding *_inode_file_wait function. Just make them static inlines instead. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
2015-07-13locks: new helpers - flock_lock_inode_wait and posix_lock_inode_waitJeff Layton1-0/+14
Allow callers to pass in an inode instead of a filp. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Reviewed-by: "J. Bruce Fields" <bfields@fieldses.org> Tested-by: "J. Bruce Fields" <bfields@fieldses.org>
2015-07-12can: replace timestamp as unique skb attributeOliver Hartkopp1-0/+2
Commit 514ac99c64b "can: fix multiple delivery of a single CAN frame for overlapping CAN filters" requires the skb->tstamp to be set to check for identical CAN skbs. Without timestamping to be required by user space applications this timestamp was not generated which lead to commit 36c01245eb8 "can: fix loss of CAN frames in raw_rcv" - which forces the timestamp to be set in all CAN related skbuffs by introducing several __net_timestamp() calls. This forces e.g. out of tree drivers which are not using alloc_can{,fd}_skb() to add __net_timestamp() after skbuff creation to prevent the frame loss fixed in mainline Linux. This patch removes the timestamp dependency and uses an atomic counter to create an unique identifier together with the skbuff pointer. Btw: the new skbcnt element introduced in struct can_skb_priv has to be initialized with zero in out-of-tree drivers which are not using alloc_can{,fd}_skb() too. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-07-12Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds2-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "This update from the timer departement contains: - A series of patches which address a shortcoming in the tick broadcast code. If the broadcast device is not available or an hrtimer emulated broadcast device, some of the original assumptions lead to boot failures. I rather plugged all of the corner cases instead of only addressing the issue reported, so the change got a little larger. Has been extensivly tested on x86 and arm. - Get rid of the last holdouts using do_posix_clock_monotonic_gettime() - A regression fix for the imx clocksource driver - An update to the new state callbacks mechanism for clockevents. This is required to simplify the conversion, which will take place in 4.3" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick/broadcast: Prevent NULL pointer dereference time: Get rid of do_posix_clock_monotonic_gettime cris: Replace do_posix_clock_monotonic_gettime() tick/broadcast: Unbreak CONFIG_GENERIC_CLOCKEVENTS=n build tick/broadcast: Handle spurious interrupts gracefully tick/broadcast: Check for hrtimer broadcast active early tick/broadcast: Return busy when IPI is pending tick/broadcast: Return busy if periodic mode and hrtimer broadcast tick/broadcast: Move the check for periodic mode inside state handling tick/broadcast: Prevent deep idle if no broadcast device available tick/broadcast: Make idle check independent from mode and config tick/broadcast: Sanity check the shutdown of the local clock_event tick/broadcast: Prevent hrtimer recursion clockevents: Allow set-state callbacks to be optional clocksource/imx: Define clocksource for mx27
2015-07-12Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomas Gleixner: "A single fix for a cpu hotplug race vs. interrupt descriptors: Prevent irq setup/teardown across the cpu starting/dying parts of cpu hotplug so that the starting/dying cpu has a stable view of the descriptor space. This has been an issue for all architectures in the cpu dying phase, where interrupts are migrated away from the dying cpu. In the starting phase its mostly a x86 issue vs the vector space update" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hotplug: Prevent alloc/free of irq descriptors during cpu up/down
2015-07-11Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm Pull libnvdimm fixes from Dan Williams: "1) Fixes for a handful of smatch reports (Thanks Dan C.!) and minor bug fixes (patches 1-6) 2) Correctness fixes to the BLK-mode nvdimm driver (patches 7-10). Granted these are slightly large for a -rc update. They have been out for review in one form or another since the end of May and were deferred from the merge window while we settled on the "PMEM API" for the PMEM-mode nvdimm driver (ie memremap_pmem, memcpy_to_pmem, and wmb_pmem). Now that those apis are merged we implement them in the BLK driver to guarantee that mmio aperture moves stay ordered with respect to incoming read/write requests, and that writes are flushed through those mmio-windows and platform-buffers to be persistent on media. These pass the sub-system unit tests with the updates to tools/testing/nvdimm, and have received a successful build-report from the kbuild robot (468 configs). With acks from Rafael for the touches to drivers/acpi/" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm: nfit: add support for NVDIMM "latch" flag nfit: update block I/O path to use PMEM API tools/testing/nvdimm: add mock acpi_nfit_flush_address entries to nfit_test tools/testing/nvdimm: fix return code for unimplemented commands tools/testing/nvdimm: mock ioremap_wt pmem: add maintainer for include/linux/pmem.h nfit: fix smatch "use after null check" report nvdimm: Fix return value of nvdimm_bus_init() if class_create() fails libnvdimm: smatch cleanups in __nd_ioctl sparse: fix misplaced __pmem definition
2015-07-11Merge tag 'armsoc-fixes' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Kevin Hilman: "A fairly random colletion of fixes based on -rc1 for OMAP, sunxi and prima2 as well as a few arm64-specific DT fixes. This series also includes a late to support a new Allwinner (sunxi) SoC, but since it's rather simple and isolated to the platform-specific code, it's included it for this -rc" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: dts: add device tree for ARM SMM-A53x2 on LogicTile Express 20MG arm: dts: vexpress: add missing CCI PMU device node to TC2 arm: dts: vexpress: describe all PMUs in TC2 dts GICv3: Add ITS entry to THUNDER dts arm64: dts: Add poweroff button device node for APM X-Gene platform ARM: dts: am4372.dtsi: disable rfbi ARM: dts: am57xx-beagle-x15: Provide supply for usb2_phy2 ARM: dts: am4372: Add emif node Revert "ARM: dts: am335x-boneblack: disable RTC-only sleep" ARM: sunxi: Enable simplefb in the defconfig ARM: Remove deprecated symbol from defconfig files ARM: sunxi: Add Machine support for A33 ARM: sunxi: Introduce Allwinner H3 support Documentation: sunxi: Update Allwinner SoC documentation ARM: prima2: move to use REGMAP APIs for rtciobrg ARM: dts: atlas7: add pinctrl and gpio descriptions ARM: OMAP2+: Remove unnessary return statement from the void function, omap2_show_dma_caps memory: omap-gpmc: Fix parsing of devices
2015-07-10KVM: count number of assigned devicesPaolo Bonzini1-0/+18
If there are no assigned devices, the guest PAT are not providing any useful information and can be overridden to writeback; VMX always does this because it has the "IPAT" bit in its extended page table entries, but SVM does not have anything similar. Hook into VFIO and legacy device assignment so that they provide this information to KVM. Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Tested-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-09cdc_ncm: Add support for moving NDP to end of NCM frameEnrico Mioso1-1/+6
NCM specs are not actually mandating a specific position in the frame for the NDP (Network Datagram Pointer). However, some Huawei devices will ignore our aggregates if it is not placed after the datagrams it points to. Add support for doing just this, in a per-device configurable way. While at it, update NCM subdrivers, disabling this functionality in all of them, except in huawei_cdc_ncm where it is enabled instead. We aren't making any distinction between different Huawei NCM devices, based on what the vendor driver does. Standard NCM devices are left unaffected: if they are compliant, they should be always usable, still stay on the safe side. This change has been tested and working with a Huawei E3131 device (which works regardless of NDP position), a Huawei E3531 (also working both ways) and an E3372 (which mandates NDP to be after indexed datagrams). V1->V2: - corrected wrong NDP acronym definition - fixed possible NULL pointer dereference - patch cleanup V2->V3: - Properly account for the NDP size when writing new packets to SKB Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-09blkcg: fix blkcg_policy_data allocation bugTejun Heo1-8/+2
e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") updated per-blkcg policy data to be dynamically allocated. When a policy is registered, its policy data aren't created. Instead, when the policy is activated on a queue, the policy data are allocated if there are blkg's (blkcg_gq's) which are attached to a given blkcg. This is buggy. Consider the following scenario. 1. A blkcg is created. No blkg's attached yet. 2. The policy is registered. No policy data is allocated. 3. The policy is activated on a queue. As the above blkcg doesn't have any blkg's, it won't allocate the matching blkcg_policy_data. 4. An IO is issued from the blkcg and blkg is created and the blkcg still doesn't have the matching policy data allocated. With cfq-iosched, this leads to an oops. It also doesn't free policy data on policy unregistration assuming that freeing of all policy data on blkcg destruction should take care of it; however, this also is incorrect. 1. A blkcg has policy data. 2. The policy gets unregistered but the policy data remains. 3. Another policy gets registered on the same slot. 4. Later, the new policy tries to allocate policy data on the previous blkcg but the slot is already occupied and gets skipped. The policy ends up operating on the policy data of the previous policy. There's no reason to manage blkcg_policy_data lazily. The reason we do lazy allocation of blkg's is that the number of all possible blkg's is the product of cgroups and block devices which can reach a surprising level. blkcg_policy_data is contrained by the number of cgroups and shouldn't be a problem. This patch makes blkcg_policy_data to be allocated for all existing blkcg's on policy registration and freed on unregistration and removes blkcg_policy_data handling from policy [de]activation paths. This makes that blkcg_policy_data are created and removed with the policy they belong to and fixes the above described problems. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-09blkcg: implement all_blkcgs listTejun Heo1-0/+1
Add all_blkcgs list goes through blkcg->all_blkcgs_node and is protected by blkcg_pol_mutex. This will be used to fix blkcg_policy_data allocation bug. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-09Merge branch 'for-linus' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph fixes from Sage Weil: "There is a fix for CephFS and RBD when used within containers/namespaces, and a fix for the address learning the client is supposed to do when initially talking to the Ceph cluster. There are also two patches updating MAINTAINERS. One breaks out the common Ceph code shared by fs/ceph and drivers/block/rbd.c into a separate entry with the appropriate maintainers listed. The second adds a second reference to the github tree where the Ceph client development takes place (before it is pushed to korg and then to you). The goal here is to move closer to a situation where Ilya Dryomov or one of the other maintainers can push things to you if I am unavailable. Ilya has done most of the work preparing branches for upstream recently; you should not be surprised to hear from him if I am trapped in some internet-less wasteland or hit by a bus or something. In the meantime, we'll work on getting him added to the kernel web of trust" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: MAINTAINERS: add secondary tree for ceph modules MAINTAINERS: update ceph entries libceph: treat sockaddr_storage with uninitialized family as blank libceph: enable ceph in a non-default network namespace
2015-07-09libceph: enable ceph in a non-default network namespaceIlya Dryomov1-0/+3
Grab a reference on a network namespace of the 'rbd map' (in case of rbd) or 'mount' (in case of ceph) process and use that to open sockets instead of always using init_net and bailing if network namespace is anything but init_net. Be careful to not share struct ceph_client instances between different namespaces and don't add any code in the !CONFIG_NET_NS case. This is based on a patch from Hong Zhiguo <zhiguohong@tencent.com>. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2015-07-09time: Get rid of do_posix_clock_monotonic_gettimeThomas Gleixner1-1/+0
All users gone. Remove it before we get another one. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-08ipv4: add support for linkdown sysctl to netconfAndy Gospodarek1-0/+1
This kernel patch exports the value of the new ignore_routes_with_linkdown via netconf. v2: changes to notify userspace via netlink when sysctl values change and proposed for 'net' since this could be considered a bugfix Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Suggested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08Merge tag 'pm+acpi-4.2-rc2' of ↵Linus Torvalds2-10/+16
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "These are fixes on top of the previous PM+ACPI pull requests (including one fix for a 4.1 regression) and two commits adding _CLS-based device enumeration support to the ACPI core and the ATA subsystem that waited for the latest ACPICA changes to be merged. Specifics: - Fix for an ACPI resources management regression introduced during the 4.1 cycle (that unfortunately went into -stable) effectively reverting the bad commit along with the recent fixups on top of it and using an alternative approach to address the underlying issue (Rafael J Wysocki). - Fix for a memory leak and an incorrect return value in an error code path in the ACPI LPSS (Low-Power Subsystem) driver (Rafael J Wysocki). - Fix for a leftover dangling pointer in an error code path in the new wakeup IRQ support code (Rafael J Wysocki). - Fix to prevent infinite loops (due to errors in other places) from happening in the core generic PM domains support code (Geert Uytterhoeven). - Hibernation documentation update/clarification (Uwe Geuder). - Support for _CLS-based device enumeration in the ACPI core and in the ATA subsystem (Suravee Suthikulpanit)" * tag 'pm+acpi-4.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / wakeirq: Avoid setting power.wakeirq too hastily ata: ahci_platform: Add ACPI _CLS matching ACPI / scan: Add support for ACPI _CLS device matching PM / hibernate: clarify resume documentation PM / Domains: Avoid infinite loops in attach/detach code ACPI / LPSS: Fix up acpi_lpss_create_device() ACPI / PNP: Reserve ACPI resources at the fs_initcall_sync stage
2015-07-08Merge tag 'sirf-iobrg2regmap-for-4.2' of ↵Kevin Hilman1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux into fixes Merge "CSR SiRFSoC rtc iobrg move to regmap for 4.2" from Barry Song: move CSR rtc iobrg read/write API to be regmap this moves to general APIs, and all drivers will be changed based on it. * tag 'sirf-iobrg2regmap-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux: ARM: prima2: move to use REGMAP APIs for rtciobrg
2015-07-08hotplug: Prevent alloc/free of irq descriptors during cpu up/downThomas Gleixner1-1/+6
When a cpu goes up some architectures (e.g. x86) have to walk the irq space to set up the vector space for the cpu. While this needs extra protection at the architecture level we can avoid a few race conditions by preventing the concurrent allocation/free of irq descriptors and the associated data. When a cpu goes down it moves the interrupts which are targeted to this cpu away by reassigning the affinities. While this happens interrupts can be allocated and freed, which opens a can of race conditions in the code which reassignes the affinities because interrupt descriptors might be freed underneath. Example: CPU1 CPU2 cpu_up/down irq_desc = irq_to_desc(irq); remove_from_radix_tree(desc); raw_spin_lock(&desc->lock); free(desc); We could protect the irq descriptors with RCU, but that would require a full tree change of all accesses to interrupt descriptors. But fortunately these kind of race conditions are rather limited to a few things like cpu hotplug. The normal setup/teardown is very well serialized. So the simpler and obvious solution is: Prevent allocation and freeing of interrupt descriptors accross cpu hotplug. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: xiao jin <jin.xiao@intel.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Borislav Petkov <bp@suse.de> Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com> Link: http://lkml.kernel.org/r/20150705171102.063519515@linutronix.de
2015-07-07Merge branch 'acpi-scan'Rafael J. Wysocki2-0/+16
* acpi-scan: ata: ahci_platform: Add ACPI _CLS matching ACPI / scan: Add support for ACPI _CLS device matching
2015-07-07tick/broadcast: Unbreak CONFIG_GENERIC_CLOCKEVENTS=n buildThomas Gleixner1-0/+7
Making tick_broadcast_oneshot_control() independent from CONFIG_GENERIC_CLOCKEVENTS_BROADCAST broke the build for CONFIG_GENERIC_CLOCKEVENTS=n because the function is not defined there. Provide a proper stub inline. Fixes: f32dd1170511 'tick/broadcast: Make idle check independent from mode and config' Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Privacy Policy