path: root/init
AgeCommit message (Collapse)AuthorFilesLines
2021-04-08add support for Clang CFISami Tolvanen1-1/+1
This change adds support for Clang’s forward-edge Control Flow Integrity (CFI) checking. With CONFIG_CFI_CLANG, the compiler injects a runtime check before each indirect function call to ensure the target is a valid function with the correct static type. This restricts possible call targets and makes it more difficult for an attacker to exploit bugs that allow the modification of stored function pointers. For more details, see: https://clang.llvm.org/docs/ControlFlowIntegrity.html Clang requires CONFIG_LTO_CLANG to be enabled with CFI to gain visibility to possible call targets. Kernel modules are supported with Clang’s cross-DSO CFI mode, which allows checking between independently compiled components. With CFI enabled, the compiler injects a __cfi_check() function into the kernel and each module for validating local call targets. For cross-module calls that cannot be validated locally, the compiler calls the global __cfi_slowpath_diag() function, which determines the target module and calls the correct __cfi_check() function. This patch includes a slowpath implementation that uses __module_address() to resolve call targets, and with CONFIG_CFI_CLANG_SHADOW enabled, a shadow map that speeds up module look-ups by ~3x. Clang implements indirect call checking using jump tables and offers two methods of generating them. With canonical jump tables, the compiler renames each address-taken function to <function>.cfi and points the original symbol to a jump table entry, which passes __cfi_check() validation. This isn’t compatible with stand-alone assembly code, which the compiler doesn’t instrument, and would result in indirect calls to assembly code to fail. Therefore, we default to using non-canonical jump tables instead, where the compiler generates a local jump table entry <function>.cfi_jt for each address-taken function, and replaces all references to the function with the address of the jump table entry. Note that because non-canonical jump table addresses are local to each component, they break cross-module function address equality. Specifically, the address of a global function will be different in each module, as it's replaced with the address of a local jump table entry. If this address is passed to a different module, it won’t match the address of the same function taken there. This may break code that relies on comparing addresses passed from other components. CFI checking can be disabled in a function with the __nocfi attribute. Additionally, CFI can be disabled for an entire compilation unit by filtering out CC_FLAGS_CFI. By default, CFI failures result in a kernel panic to stop a potential exploit. CONFIG_CFI_PERMISSIVE enables a permissive mode, where the kernel prints out a rate-limited warning instead, and allows execution to continue. This option is helpful for locating type mismatches, but should only be enabled during development. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210408182843.1754385-2-samitolvanen@google.com
2021-03-14Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-2/+1
Merge misc fixes from Andrew Morton: "28 patches. Subsystems affected by this series: mm (memblock, pagealloc, hugetlb, highmem, kfence, oom-kill, madvise, kasan, userfaultfd, memcg, and zram), core-kernel, kconfig, fork, binfmt, MAINTAINERS, kbuild, and ia64" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (28 commits) zram: fix broken page writeback zram: fix return value on writeback_store mm/memcg: set memcg when splitting page mm/memcg: rename mem_cgroup_split_huge_fixup to split_page_memcg and add nr_pages argument ia64: fix ptrace(PTRACE_SYSCALL_INFO_EXIT) sign ia64: fix ia64_syscall_get_set_arguments() for break-based syscalls mm/userfaultfd: fix memory corruption due to writeprotect kasan: fix KASAN_STACK dependency for HW_TAGS kasan, mm: fix crash with HW_TAGS and DEBUG_PAGEALLOC mm/madvise: replace ptrace attach requirement for process_madvise include/linux/sched/mm.h: use rcu_dereference in in_vfork() kfence: fix reports if constant function prefixes exist kfence, slab: fix cache_alloc_debugcheck_after() for bulk allocations kfence: fix printk format for ptrdiff_t linux/compiler-clang.h: define HAVE_BUILTIN_BSWAP* MAINTAINERS: exclude uapi directories in API/ABI section binfmt_misc: fix possible deadlock in bm_register_write mm/highmem.c: fix zero_user_segments() with start > end hugetlb: do early cow when page pinned on src mm mm: use is_cow_mapping() across tree where proper ...
2021-03-13init/Kconfig: make COMPILE_TEST depend on HAS_IOMEMMasahiro Yamada1-2/+1
I read the commit log of the following two: - bc083a64b6c0 ("init/Kconfig: make COMPILE_TEST depend on !UML") - 334ef6ed06fa ("init/Kconfig: make COMPILE_TEST depend on !S390") Both are talking about HAS_IOMEM dependency missing in many drivers. So, 'depends on HAS_IOMEM' seems the direct, sensible solution to me. This does not change the behavior of UML. UML still cannot enable COMPILE_TEST because it does not provide HAS_IOMEM. The current dependency for S390 is too strong. Under the condition of CONFIG_PCI=y, S390 provides HAS_IOMEM, hence can enable COMPILE_TEST. I also removed the meaningless 'default n'. Link: https://lkml.kernel.org/r/20210224140809.1067582-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KP Singh <kpsingh@google.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Terrell <terrelln@fb.com> Cc: Quentin Perret <qperret@google.com> Cc: Valentin Schneider <valentin.schneider@arm.com> Cc: "Enrico Weigelt, metux IT consult" <lkml@metux.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-11kbuild: rebuild GCC plugins when the compiler is upgradedMasahiro Yamada1-4/+4
Linus reported a build error due to the GCC plugin incompatibility when the compiler is upgraded. [1] GCC plugins are tied to a particular GCC version. So, they must be rebuilt when the compiler is upgraded. This seems to be a long-standing flaw since the initial support of GCC plugins. Extend commit 8b59cd81dc5e ("kbuild: ensure full rebuild when the compiler is updated"), so that GCC plugins are covered by the compiler upgrade detection. [1]: https://lore.kernel.org/lkml/CAHk-=wieoN5ttOy7SnsGwZv+Fni3R6m-Ut=oxih6bbZ28G+4dw@mail.gmail.com/ Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org>
2021-02-28kbuild: fix UNUSED_KSYMS_WHITELIST for Clang LTOMasahiro Yamada1-1/+0
Commit fbe078d397b4 ("kbuild: lto: add a default list of used symbols") does not work as expected if the .config file has already specified CONFIG_UNUSED_KSYMS_WHITELIST="my/own/white/list" before enabling CONFIG_LTO_CLANG. So, the user-supplied whitelist and LTO-specific white list must be independent of each other. I refactored the shell script so CONFIG_MODVERSIONS and CONFIG_CLANG_LTO handle whitelists in the same way. Fixes: fbe078d397b4 ("kbuild: lto: add a default list of used symbols") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
2021-02-26Merge tag 'riscv-for-linus-5.12-mw0' of ↵Linus Torvalds1-0/+45
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "A handful of new RISC-V related patches for this merge window: - A check to ensure drivers are properly using uaccess. This isn't manifesting with any of the drivers I'm currently using, but may catch errors in new drivers. - Some preliminary support for the FU740, along with the HiFive Unleashed it will appear on. - NUMA support for RISC-V, which involves making the arm64 code generic. - Support for kasan on the vmalloc region. - A handful of new drivers for the Kendryte K210, along with the DT plumbing required to boot on a handful of K210-based boards. - Support for allocating ASIDs. - Preliminary support for kernels larger than 128MiB. - Various other improvements to our KASAN support, including the utilization of huge pages when allocating the KASAN regions. We may have already found a bug with the KASAN_VMALLOC code, but it's passing my tests. There's a fix in the works, but that will probably miss the merge window. * tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits) riscv: Improve kasan population by using hugepages when possible riscv: Improve kasan population function riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization riscv: Improve kasan definitions riscv: Get rid of MAX_EARLY_MAPPING_SIZE soc: canaan: Sort the Makefile alphabetically riscv: Disable KSAN_SANITIZE for vDSO riscv: Remove unnecessary declaration riscv: Add Canaan Kendryte K210 SD card defconfig riscv: Update Canaan Kendryte K210 defconfig riscv: Add Kendryte KD233 board device tree riscv: Add SiPeed MAIXDUINO board device tree riscv: Add SiPeed MAIX GO board device tree riscv: Add SiPeed MAIX DOCK board device tree riscv: Add SiPeed MAIX BiT board device tree riscv: Update Canaan Kendryte K210 device tree dt-bindings: add resets property to dw-apb-timer dt-bindings: fix sifive gpio properties dt-bindings: update sifive uart compatible string dt-bindings: update sifive clint compatible string ...
2021-02-26initramfs: panic with memory informationFlorian Fainelli1-4/+15
On systems with large amounts of reserved memory we may fail to successfully complete unpack_to_rootfs() and be left with: Kernel panic - not syncing: write error this is not too helpful to understand what happened, so let's wrap the panic() calls with a surrounding show_mem() such that we have a chance of understanding the memory conditions leading to these allocation failures. [akpm@linux-foundation.org: replace macro with C function] Link: https://lkml.kernel.org/r/20210114231517.1854379-1-f.fainelli@gmail.com Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Barret Rhoden <brho@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26kgdb: fix to kill breakpoints on initmem after bootSumit Garg1-0/+1
Currently breakpoints in kernel .init.text section are not handled correctly while allowing to remove them even after corresponding pages have been freed. Fix it via killing .init.text section breakpoints just prior to initmem pages being freed. Doug: "HW breakpoints aren't handled by this patch but it's probably not such a big deal". Link: https://lkml.kernel.org/r/20210224081652.587785-1-sumit.garg@linaro.org Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Suggested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26init/Kconfig: fix a typo in CC_VERSION_TEXT help textBhaskar Chowdhury1-1/+1
s/compier/compiler/ Link: https://lkml.kernel.org/r/20210224223325.29099-1-unixbhaskar@gmail.com Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26init/version.c: remove Version_<LINUX_VERSION_CODE> symbolMasahiro Yamada1-8/+0
This code hunk creates a Version_<LINUX_VERSION_CODE> symbol if CONFIG_KALLSYMS is disabled. For example, building the kernel v5.10 for allnoconfig creates the following symbol: $ nm vmlinux | grep Version_ c116b028 B Version_330240 There is no in-tree user of this symbol. Commit 197dcffc8ba0 ("init/version.c: define version_string only if CONFIG_KALLSYMS is not defined") mentions that Version_* is only used with ksymoops. However, a commit in the pre-git era [1] had added the statement, "ksymoops is useless on 2.6. Please use the Oops in its original format". That statement existed until commit 4eb9241127a0 ("Documentation: admin-guide: update bug-hunting.rst") finally removed the stale ksymoops information. This symbol is no longer needed. [1] https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=ad68b2f085f5c79e4759ca2d13947b3c885ee831 Link: https://lkml.kernel.org/r/20210120033452.2895170-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Daniel Guilak <guilak@linux.vnet.ibm.com> Cc: Lee Revell <rlrevell@joe-job.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26lib: stackdepot: add support to disable stack depotVijayanand Jitta1-0/+2
Add a kernel parameter stack_depot_disable to disable stack depot. So that stack hash table doesn't consume any memory when stack depot is disabled. The use case is CONFIG_PAGE_OWNER without page_owner=on. Without this patch, stackdepot will consume the memory for the hashtable. By default, it's 8M which is never trivial. With this option, in CONFIG_PAGE_OWNER configured system, page_owner=off, stack_depot_disable in kernel command line, we could save the wasted memory for the hashtable. [akpm@linux-foundation.org: fix CONFIG_STACKDEPOT=n build] Link: https://lkml.kernel.org/r/1611749198-24316-2-git-send-email-vjitta@codeaurora.org Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org> Signed-off-by: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Alexander Potapenko <glider@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Yogesh Lal <ylal@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26mm: add Kernel Electric-Fence infrastructureAlexander Potapenko1-0/+3
Patch series "KFENCE: A low-overhead sampling-based memory safety error detector", v7. This adds the Kernel Electric-Fence (KFENCE) infrastructure. KFENCE is a low-overhead sampling-based memory safety error detector of heap use-after-free, invalid-free, and out-of-bounds access errors. This series enables KFENCE for the x86 and arm64 architectures, and adds KFENCE hooks to the SLAB and SLUB allocators. KFENCE is designed to be enabled in production kernels, and has near zero performance overhead. Compared to KASAN, KFENCE trades performance for precision. The main motivation behind KFENCE's design, is that with enough total uptime KFENCE will detect bugs in code paths not typically exercised by non-production test workloads. One way to quickly achieve a large enough total uptime is when the tool is deployed across a large fleet of machines. KFENCE objects each reside on a dedicated page, at either the left or right page boundaries. The pages to the left and right of the object page are "guard pages", whose attributes are changed to a protected state, and cause page faults on any attempted access to them. Such page faults are then intercepted by KFENCE, which handles the fault gracefully by reporting a memory access error. Guarded allocations are set up based on a sample interval (can be set via kfence.sample_interval). After expiration of the sample interval, the next allocation through the main allocator (SLAB or SLUB) returns a guarded allocation from the KFENCE object pool. At this point, the timer is reset, and the next allocation is set up after the expiration of the interval. To enable/disable a KFENCE allocation through the main allocator's fast-path without overhead, KFENCE relies on static branches via the static keys infrastructure. The static branch is toggled to redirect the allocation to KFENCE. The KFENCE memory pool is of fixed size, and if the pool is exhausted no further KFENCE allocations occur. The default config is conservative with only 255 objects, resulting in a pool size of 2 MiB (with 4 KiB pages). We have verified by running synthetic benchmarks (sysbench I/O, hackbench) and production server-workload benchmarks that a kernel with KFENCE (using sample intervals 100-500ms) is performance-neutral compared to a non-KFENCE baseline kernel. KFENCE is inspired by GWP-ASan [1], a userspace tool with similar properties. The name "KFENCE" is a homage to the Electric Fence Malloc Debugger [2]. For more details, see Documentation/dev-tools/kfence.rst added in the series -- also viewable here: https://raw.githubusercontent.com/google/kasan/kfence/Documentation/dev-tools/kfence.rst [1] http://llvm.org/docs/GwpAsan.html [2] https://linux.die.net/man/3/efence This patch (of 9): This adds the Kernel Electric-Fence (KFENCE) infrastructure. KFENCE is a low-overhead sampling-based memory safety error detector of heap use-after-free, invalid-free, and out-of-bounds access errors. KFENCE is designed to be enabled in production kernels, and has near zero performance overhead. Compared to KASAN, KFENCE trades performance for precision. The main motivation behind KFENCE's design, is that with enough total uptime KFENCE will detect bugs in code paths not typically exercised by non-production test workloads. One way to quickly achieve a large enough total uptime is when the tool is deployed across a large fleet of machines. KFENCE objects each reside on a dedicated page, at either the left or right page boundaries. The pages to the left and right of the object page are "guard pages", whose attributes are changed to a protected state, and cause page faults on any attempted access to them. Such page faults are then intercepted by KFENCE, which handles the fault gracefully by reporting a memory access error. To detect out-of-bounds writes to memory within the object's page itself, KFENCE also uses pattern-based redzones. The following figure illustrates the page layout: ---+-----------+-----------+-----------+-----------+-----------+--- | xxxxxxxxx | O : | xxxxxxxxx | : O | xxxxxxxxx | | xxxxxxxxx | B : | xxxxxxxxx | : B | xxxxxxxxx | | x GUARD x | J : RED- | x GUARD x | RED- : J | x GUARD x | | xxxxxxxxx | E : ZONE | xxxxxxxxx | ZONE : E | xxxxxxxxx | | xxxxxxxxx | C : | xxxxxxxxx | : C | xxxxxxxxx | | xxxxxxxxx | T : | xxxxxxxxx | : T | xxxxxxxxx | ---+-----------+-----------+-----------+-----------+-----------+--- Guarded allocations are set up based on a sample interval (can be set via kfence.sample_interval). After expiration of the sample interval, a guarded allocation from the KFENCE object pool is returned to the main allocator (SLAB or SLUB). At this point, the timer is reset, and the next allocation is set up after the expiration of the interval. To enable/disable a KFENCE allocation through the main allocator's fast-path without overhead, KFENCE relies on static branches via the static keys infrastructure. The static branch is toggled to redirect the allocation to KFENCE. To date, we have verified by running synthetic benchmarks (sysbench I/O, hackbench) that a kernel compiled with KFENCE is performance-neutral compared to the non-KFENCE baseline. For more details, see Documentation/dev-tools/kfence.rst (added later in the series). [elver@google.com: fix parameter description for kfence_object_start()] Link: https://lkml.kernel.org/r/20201106092149.GA2851373@elver.google.com [elver@google.com: avoid stalling work queue task without allocations] Link: https://lkml.kernel.org/r/CADYN=9J0DQhizAGB0-jz4HOBBh+05kMBXb4c0cXMS7Qi5NAJiw@mail.gmail.com Link: https://lkml.kernel.org/r/20201110135320.3309507-1-elver@google.com [elver@google.com: fix potential deadlock due to wake_up()] Link: https://lkml.kernel.org/r/000000000000c0645805b7f982e4@google.com Link: https://lkml.kernel.org/r/20210104130749.1768991-1-elver@google.com [elver@google.com: add option to use KFENCE without static keys] Link: https://lkml.kernel.org/r/20210111091544.3287013-1-elver@google.com [elver@google.com: add missing copyright and description headers] Link: https://lkml.kernel.org/r/20210118092159.145934-1-elver@google.com Link: https://lkml.kernel.org/r/20201103175841.3495947-2-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Alexander Potapenko <glider@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: SeongJae Park <sjpark@amazon.de> Co-developed-by: Marco Elver <elver@google.com> Reviewed-by: Jann Horn <jannh@google.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christopher Lameter <cl@linux.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hillf Danton <hdanton@sina.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Joern Engel <joern@purestorage.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-25Merge tag 'kbuild-v5.12' of ↵Linus Torvalds1-12/+18
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Fix false-positive build warnings for ARCH=ia64 builds - Optimize dictionary size for module compression with xz - Check the compiler and linker versions in Kconfig - Fix misuse of extra-y - Support DWARF v5 debug info - Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x exceeded the limit - Add generic syscall{tbl,hdr}.sh for cleanups across arches - Minor cleanups of genksyms - Minor cleanups of Kconfig * tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (38 commits) initramfs: Remove redundant dependency of RD_ZSTD on BLK_DEV_INITRD kbuild: remove deprecated 'always' and 'hostprogs-y/m' kbuild: parse C= and M= before changing the working directory kbuild: reuse this-makefile to define abs_srctree kconfig: unify rule of config, menuconfig, nconfig, gconfig, xconfig kconfig: omit --oldaskconfig option for 'make config' kconfig: fix 'invalid option' for help option kconfig: remove dead code in conf_askvalue() kconfig: clean up nested if-conditionals in check_conf() kconfig: Remove duplicate call to sym_get_string_value() Makefile: Remove # characters from compiler string Makefile: reuse CC_VERSION_TEXT kbuild: check the minimum linker version in Kconfig kbuild: remove ld-version macro scripts: add generic syscallhdr.sh scripts: add generic syscalltbl.sh arch: syscalls: remove $(srctree)/ prefix from syscall tables arch: syscalls: add missing FORCE and fix 'targets' to make if_changed work gen_compile_commands: prune some directories kbuild: simplify access to the kernel's version ...
2021-02-24Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-14/+0
Merge misc updates from Andrew Morton: "A few small subsystems and some of MM. 172 patches. Subsystems affected by this patch series: hexagon, scripts, ntfs, ocfs2, vfs, and mm (slab-generic, slab, slub, debug, pagecache, swap, memcg, pagemap, mprotect, mremap, page-reporting, vmalloc, kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction, mempolicy, oom-kill, hugetlbfs, and migration)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (172 commits) mm/migrate: remove unneeded semicolons hugetlbfs: remove unneeded return value of hugetlb_vmtruncate() hugetlbfs: fix some comment typos hugetlbfs: correct some obsolete comments about inode i_mutex hugetlbfs: make hugepage size conversion more readable hugetlbfs: remove meaningless variable avoid_reserve hugetlbfs: correct obsolete function name in hugetlbfs_read_iter() hugetlbfs: use helper macro default_hstate in init_hugetlbfs_fs hugetlbfs: remove useless BUG_ON(!inode) in hugetlbfs_setattr() hugetlbfs: remove special hugetlbfs_set_page_dirty() mm/hugetlb: change hugetlb_reserve_pages() to type bool mm, oom: fix a comment in dump_task() mm/mempolicy: use helper range_in_vma() in queue_pages_test_walk() numa balancing: migrate on fault among multiple bound nodes mm, compaction: make fast_isolate_freepages() stay within zone mm/compaction: fix misbehaviors of fast_find_migrateblock() mm/compaction: correct deferral logic for proactive compaction mm/compaction: remove duplicated VM_BUG_ON_PAGE !PageLocked mm/compaction: remove rcu_read_lock during page compaction z3fold: simplify the zhdr initialization code in init_z3fold_page() ...
2021-02-24mm, slub: remove slub_memcg_sysfs boot param and CONFIG_SLUB_MEMCG_SYSFS_ONVlastimil Babka1-14/+0
The boot param and config determine the value of memcg_sysfs_enabled, which is unused since commit 10befea91b61 ("mm: memcg/slab: use a single set of kmem_caches for all allocations") as there are no per-memcg kmem caches anymore. Link: https://lkml.kernel.org/r/20210127124745.7928-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: David Rientjes <rientjes@google.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24Merge tag 'sfi-removal-5.12-rc1' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull Simple Firmware Interface (SFI) support removal from Rafael Wysocki: "Drop support for depercated platforms using SFI, drop the entire support for SFI that has been long deprecated too and make some janitorial changes on top of that (Andy Shevchenko)" * tag 'sfi-removal-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: x86/platform/intel-mid: Update Copyright year and drop file names x86/platform/intel-mid: Remove unused header inclusion in intel-mid.h x86/platform/intel-mid: Drop unused __intel_mid_cpu_chip and Co. x86/platform/intel-mid: Get rid of intel_scu_ipc_legacy.h x86/PCI: Describe @reg for type1_access_ok() x86/PCI: Get rid of custom x86 model comparison sfi: Remove framework for deprecated firmware cpufreq: sfi-cpufreq: Remove driver for deprecated firmware media: atomisp: Remove unused header mfd: intel_msic: Remove driver for deprecated platform x86/apb_timer: Remove driver for deprecated platform x86/platform/intel-mid: Remove unused leftovers (vRTC) x86/platform/intel-mid: Remove unused leftovers (msic) x86/platform/intel-mid: Remove unused leftovers (msic_thermal) x86/platform/intel-mid: Remove unused leftovers (msic_power_btn) x86/platform/intel-mid: Remove unused leftovers (msic_gpio) x86/platform/intel-mid: Remove unused leftovers (msic_battery) x86/platform/intel-mid: Remove unused leftovers (msic_ocd) x86/platform/intel-mid: Remove unused leftovers (msic_audio) platform/x86: intel_scu_wdt: Drop mistakenly added const
2021-02-24Kbuild: enable TRIM_UNUSED_KSYMS again, with some guardingLinus Torvalds1-2/+2
In commit 5cf0fd591f2e ("Kbuild: disable TRIM_UNUSED_KSYMS option") I disabled this option because it's hugely expensive at build time, and I questioned how much use it gets. Several people piped up and convinced me it's actually useful, so instead of disabling it entirely, it now depends on EXPERT and gets disabled by COMPILE_TEST builds so that 'allmodconfig' style things don't enable it. I still hope somebody will take a look at the build time issue, because as Arnd also noted: "However, the combination of thinlto and trim indeed has a steep cost in compile time, taking almost twice as long as a normal defconfig (gc-sections makes it slightly faster)" Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Cristoph Hellwig <hch@lst.de>, Cc: Miroslav Benes <mbenes@suse.cz> Cc: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-23Kbuild: disable TRIM_UNUSED_KSYMS optionLinus Torvalds1-0/+1
The removal of EXPORT_UNUSED_SYMBOL() in commit 367948220fce looks like (and was sold as) a no-op, but it actually had a rather serious and subtle side effect: the UNUSED_SYMBOLS option not only enabled the removed (unused) functionality, it also _disabled_ the TRIM_UNUSED_KSYMS functionality. And it turns out that TRIM_UNUSED_KSYMS is a huge time waste, and takes up a third of the kernel build time for me. For no actual upside, since no distro is likely to ever be able to enable it (because they all support external kernel modules). Rather than re-enable EXPORT_UNUSED_SYMBOL, this just disables the TRIM_UNUSED_KSYMS option by marking it broken. I'm tempted to just remove the support entirely, but maybe somebody has a use-case and can fix the behavior of it. I could have just disabled it for COMPILE_TEST, but it really smells like the TRIM_UNUSED_KSYMS option is badly done and not really useful, so this takes the more direct approach - let's see if anybody ever actually notices or complains. Cc: Miroslav Benes <mbenes@suse.cz> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jessica Yu <jeyu@kernel.org> Fixes: 367948220fce ("module: remove EXPORT_UNUSED_SYMBOL*") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-23Merge tag 'modules-for-v5.12' of ↵Linus Torvalds1-17/+0
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull module updates from Jessica Yu: - Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These export types were introduced between 2006 - 2008. All the of the unused symbols have been long removed and gpl future symbols were converted to gpl quite a long time ago, and I don't believe these export types have been used ever since. So, I think it should be safe to retire those export types now (Christoph Hellwig) - Refactor and clean up some aged code cruft in the module loader (Christoph Hellwig) - Build {,module_}kallsyms_on_each_symbol only when livepatching is enabled, as it is the only caller (Christoph Hellwig) - Unexport find_module() and module_mutex and fix the last module callers to not rely on these anymore. Make module_mutex internal to the module loader (Christoph Hellwig) - Harden ELF checks on module load and validate ELF structures before checking the module signature (Frank van der Linden) - Fix undefined symbol warning for clang (Fangrui Song) - Fix smatch warning (Dan Carpenter) * tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: potential uninitialized return in module_kallsyms_on_each_symbol() module: remove EXPORT_UNUSED_SYMBOL* module: remove EXPORT_SYMBOL_GPL_FUTURE module: move struct symsearch to module.c module: pass struct find_symbol_args to find_symbol module: merge each_symbol_section into find_symbol module: remove each_symbol_in_section module: mark module_mutex static kallsyms: only build {,module_}kallsyms_on_each_symbol when required kallsyms: refactor {,module_}kallsyms_on_each_symbol module: use RCU to synchronize find_module module: unexport find_module and module_mutex drm: remove drm_fb_helper_modinit powerpc/powernv: remove get_cxl_module module: harden ELF info handling module: Ignore _GLOBAL_OFFSET_TABLE_ when warning for undefined symbols
2021-02-23Merge tag 'clang-lto-v5.12-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull clang LTO updates from Kees Cook: "Clang Link Time Optimization. This is built on the work done preparing for LTO by arm64 folks, tracing folks, etc. This includes the core changes as well as the remaining pieces for arm64 (LTO has been the default build method on Android for about 3 years now, as it is the prerequisite for the Control Flow Integrity protections). While x86 LTO enablement is done, it depends on some pending objtool clean-ups. It's possible that I'll send a "part 2" pull request for LTO that includes x86 support. For merge log posterity, and as detailed in commit dc5723b02e52 ("kbuild: add support for Clang LTO"), here is the lt;dr to do an LTO build: make LLVM=1 LLVM_IAS=1 defconfig scripts/config -e LTO_CLANG_THIN make LLVM=1 LLVM_IAS=1 (To do a cross-compile of arm64, add "CROSS_COMPILE=aarch64-linux-gnu-" and "ARCH=arm64" to the "make" command lines.) Summary: - Clang LTO build infrastructure and arm64-specific enablement (Sami Tolvanen) - Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)" * tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: kbuild: prevent CC_FLAGS_LTO self-bloating on recursive rebuilds arm64: allow LTO to be selected arm64: disable recordmcount with DYNAMIC_FTRACE_WITH_REGS arm64: vdso: disable LTO drivers/misc/lkdtm: disable LTO for rodata.o efi/libstub: disable LTO scripts/mod: disable LTO for empty.c modpost: lto: strip .lto from module names PCI: Fix PREL32 relocations for LTO init: lto: fix PREL32 relocations init: lto: ensure initcall ordering kbuild: lto: add a default list of used symbols kbuild: lto: merge module sections kbuild: lto: limit inlining kbuild: lto: fix module versioning kbuild: add support for Clang LTO tracing: move function tracer options to Kconfig
2021-02-22Merge tag 'topic/kcmp-kconfig-2021-02-22' of ↵Linus Torvalds1-0/+11
git://anongit.freedesktop.org/drm/drm Pull kcmp kconfig update from Daniel Vetter: "Make the kcmp syscall available independently of checkpoint/restore. drm userspaces uses this, systemd uses this, so makes sense to pull it out from the checkpoint-restore bundle. Kees reviewed this from security pov and is happy with the final version" Link: https://lwn.net/Articles/845448/ * tag 'topic/kcmp-kconfig-2021-02-22' of git://anongit.freedesktop.org/drm/drm: kcmp: Support selection of SYS_kcmp without CHECKPOINT_RESTORE
2021-02-22kbuild: check the minimum linker version in KconfigMasahiro Yamada1-8/+13
Unify the two scripts/ld-version.sh and scripts/lld-version.sh, and check the minimum linker version like scripts/cc-version.sh did. I tested this script for some corner cases reported in the past: - GNU ld version 2.25-15.fc23 as reported by commit 8083013fc320 ("ld-version: Fix it on Fedora") - GNU ld (GNU Binutils) as reported by commit 0d61ed17dd30 ("ld-version: Drop the 4th and 5th version components") This script show an error message if the linker is too old: $ make LD=ld.lld-9 SYNC include/config/auto.conf *** *** Linker is too old. *** Your LLD version: 9.0.1 *** Minimum LLD version: 10.0.1 *** scripts/Kconfig.include:50: Sorry, this linker is not supported. make[2]: *** [scripts/kconfig/Makefile:71: syncconfig] Error 1 make[1]: *** [Makefile:600: syncconfig] Error 2 make: *** [Makefile:708: include/config/auto.conf] Error 2 I also moved the check for gold to this script, so gold is still rejected: $ make LD=gold SYNC include/config/auto.conf gold linker is not supported as it is not capable of linking the kernel proper. scripts/Kconfig.include:50: Sorry, this linker is not supported. make[2]: *** [scripts/kconfig/Makefile:71: syncconfig] Error 1 make[1]: *** [Makefile:600: syncconfig] Error 2 make: *** [Makefile:708: include/config/auto.conf] Error 2 Thanks to David Laight for suggesting shell script improvements. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org>
2021-02-21Merge tag 'sched-core-2021-02-17' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "Core scheduler updates: - Add CONFIG_PREEMPT_DYNAMIC: this in its current form adds the preempt=none/voluntary/full boot options (default: full), to allow distros to build a PREEMPT kernel but fall back to close to PREEMPT_VOLUNTARY (or PREEMPT_NONE) runtime scheduling behavior via a boot time selection. There's also the /debug/sched_debug switch to do this runtime. This feature is implemented via runtime patching (a new variant of static calls). The scope of the runtime patching can be best reviewed by looking at the sched_dynamic_update() function in kernel/sched/core.c. ( Note that the dynamic none/voluntary mode isn't 100% identical, for example preempt-RCU is available in all cases, plus the preempt count is maintained in all models, which has runtime overhead even with the code patching. ) The PREEMPT_VOLUNTARY/PREEMPT_NONE models, used by the vast majority of distributions, are supposed to be unaffected. - Fix ignored rescheduling after rcu_eqs_enter(). This is a bug that was found via rcutorture triggering a hang. The bug is that rcu_idle_enter() may wake up a NOCB kthread, but this happens after the last generic need_resched() check. Some cpuidle drivers fix it by chance but many others don't. In true 2020 fashion the original bug fix has grown into a 5-patch scheduler/RCU fix series plus another 16 RCU patches to address the underlying issue of missed preemption events. These are the initial fixes that should fix current incarnations of the bug. - Clean up rbtree usage in the scheduler, by providing & using the following consistent set of rbtree APIs: partial-order; less() based: - rb_add(): add a new entry to the rbtree - rb_add_cached(): like rb_add(), but for a rb_root_cached total-order; cmp() based: - rb_find(): find an entry in an rbtree - rb_find_add(): find an entry, and add if not found - rb_find_first(): find the first (leftmost) matching entry - rb_next_match(): continue from rb_find_first() - rb_for_each(): iterate a sub-tree using the previous two - Improve the SMP/NUMA load-balancer: scan for an idle sibling in a single pass. This is a 4-commit series where each commit improves one aspect of the idle sibling scan logic. - Improve the cpufreq cooling driver by getting the effective CPU utilization metrics from the scheduler - Improve the fair scheduler's active load-balancing logic by reducing the number of active LB attempts & lengthen the load-balancing interval. This improves stress-ng mmapfork performance. - Fix CFS's estimated utilization (util_est) calculation bug that can result in too high utilization values Misc updates & fixes: - Fix the HRTICK reprogramming & optimization feature - Fix SCHED_SOFTIRQ raising race & warning in the CPU offlining code - Reduce dl_add_task_root_domain() overhead - Fix uprobes refcount bug - Process pending softirqs in flush_smp_call_function_from_idle() - Clean up task priority related defines, remove *USER_*PRIO and USER_PRIO() - Simplify the sched_init_numa() deduplication sort - Documentation updates - Fix EAS bug in update_misfit_status(), which degraded the quality of energy-balancing - Smaller cleanups" * tag 'sched-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits) sched,x86: Allow !PREEMPT_DYNAMIC entry/kvm: Explicitly flush pending rcuog wakeup before last rescheduling point entry: Explicitly flush pending rcuog wakeup before last rescheduling point rcu/nocb: Trigger self-IPI on late deferred wake up before user resume rcu/nocb: Perform deferred wake up before last idle's need_resched() check rcu: Pull deferred rcuog wake up to rcu_eqs_enter() callers sched/features: Distinguish between NORMAL and DEADLINE hrtick sched/features: Fix hrtick reprogramming sched/deadline: Reduce rq lock contention in dl_add_task_root_domain() uprobes: (Re)add missing get_uprobe() in __find_uprobe() smp: Process pending softirqs in flush_smp_call_function_from_idle() sched: Harden PREEMPT_DYNAMIC static_call: Allow module use without exposing static_call_key sched: Add /debug/sched_preempt preempt/dynamic: Support dynamic preempt with preempt= boot option preempt/dynamic: Provide irqentry_exit_cond_resched() static call preempt/dynamic: Provide preempt_schedule[_notrace]() static calls preempt/dynamic: Provide cond_resched() and might_resched() static calls preempt: Introduce CONFIG_PREEMPT_DYNAMIC static_call: Provide DEFINE_STATIC_CALL_RET0() ...
2021-02-21Merge tag 'oprofile-removal-5.12' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux Pull oprofile and dcookies removal from Viresh Kumar: "Remove oprofile and dcookies support The 'oprofile' user-space tools don't use the kernel OPROFILE support any more, and haven't in a long time. User-space has been converted to the perf interfaces. The dcookies stuff is only used by the oprofile code. Now that oprofile's support is getting removed from the kernel, there is no need for dcookies as well. Remove kernel's old oprofile and dcookies support" * tag 'oprofile-removal-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux: fs: Remove dcookies support drivers: Remove CONFIG_OPROFILE support arch: xtensa: Remove CONFIG_OPROFILE support arch: x86: Remove CONFIG_OPROFILE support arch: sparc: Remove CONFIG_OPROFILE support arch: sh: Remove CONFIG_OPROFILE support arch: s390: Remove CONFIG_OPROFILE support arch: powerpc: Remove oprofile arch: powerpc: Stop building and using oprofile arch: parisc: Remove CONFIG_OPROFILE support arch: mips: Remove CONFIG_OPROFILE support arch: microblaze: Remove CONFIG_OPROFILE support arch: ia64: Remove rest of perfmon support arch: ia64: Remove CONFIG_OPROFILE support arch: hexagon: Don't select HAVE_OPROFILE arch: arc: Remove CONFIG_OPROFILE support arch: arm: Remove CONFIG_OPROFILE support arch: alpha: Remove CONFIG_OPROFILE support
2021-02-18initramfs: Provide a common initrd reserve functionKefeng Wang1-0/+45
Some architectures(eg, ARM and riscv) have similar logic to check and reserve the memory of initrd, let's provide a common function reserve_initrd_mem() to reduce duplicated code. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-17Merge tag 'v5.11' into sched/core, to pick up fixes & refresh the branchIngo Molnar3-11/+12
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-02-16kcmp: Support selection of SYS_kcmp without CHECKPOINT_RESTOREChris Wilson1-0/+11
Userspace has discovered the functionality offered by SYS_kcmp and has started to depend upon it. In particular, Mesa uses SYS_kcmp for os_same_file_description() in order to identify when two fd (e.g. device or dmabuf) point to the same struct file. Since they depend on it for core functionality, lift SYS_kcmp out of the non-default CONFIG_CHECKPOINT_RESTORE into the selectable syscall category. Rasmus Villemoes also pointed out that systemd uses SYS_kcmp to deduplicate the per-service file descriptor store. Note that some distributions such as Ubuntu are already enabling CHECKPOINT_RESTORE in their configs and so, by extension, SYS_kcmp. References: https://gitlab.freedesktop.org/drm/intel/-/issues/3046 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: stable@vger.kernel.org Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> # DRM depends on kcmp Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> # systemd uses kcmp Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210205220012.1983-1-chris@chris-wilson.co.uk
2021-02-16kbuild: check the minimum compiler version in KconfigMasahiro Yamada1-4/+5
Paul Gortmaker reported a regression in the GCC version check. [1] If you use GCC 4.8, the build breaks before showing the error message "error Sorry, your version of GCC is too old - please use 4.9 or newer." I do not want to apply his fix-up since it implies we would not be able to remove any cc-option test. Anyway, I admit checking the GCC version in <linux/compiler-gcc.h> is too late. Almost at the same time, Linus also suggested to move the compiler version error to Kconfig time. [2] I unified the two similar scripts, gcc-version.sh and clang-version.sh into cc-version.sh. The old scripts invoked the compiler multiple times (3 times for gcc-version.sh, 4 times for clang-version.sh). I refactored the code so the new one invokes the compiler just once, and also tried my best to use shell-builtin commands where possible. The new script runs faster. $ time ./scripts/clang-version.sh clang 120000 real 0m0.029s user 0m0.012s sys 0m0.021s $ time ./scripts/cc-version.sh clang Clang 120000 real 0m0.009s user 0m0.006s sys 0m0.004s cc-version.sh also shows an error message if the compiler is too old: $ make defconfig CC=clang-9 *** Default configuration is based on 'x86_64_defconfig' *** *** Compiler is too old. *** Your Clang version: 9.0.1 *** Minimum Clang version: 10.0.1 *** scripts/Kconfig.include:46: Sorry, this compiler is not supported. make[1]: *** [scripts/kconfig/Makefile:81: defconfig] Error 1 make: *** [Makefile:602: defconfig] Error 2 The new script takes care of ICC because we have <linux/compiler-intel.h> although I am not sure if building the kernel with ICC is well-supported. [1]: https://lore.kernel.org/r/20210110190807.134996-1-paul.gortmaker@windriver.com [2]: https://lore.kernel.org/r/CAHk-=wh-+TMHPTFo1qs-MYyK7tZh-OQovA=pP3=e06aCVp6_kA@mail.gmail.com Fixes: 87de84c9140e ("kbuild: remove cc-option test of -Werror=date-time") Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Tested-by: Miguel Ojeda <ojeda@kernel.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-02-15sfi: Remove framework for deprecated firmwareAndy Shevchenko1-2/+0
SFI-based platforms are gone. So does this framework. This removes mention of SFI through the drivers and other code as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-08module: remove EXPORT_UNUSED_SYMBOL*Christoph Hellwig1-17/+0
EXPORT_UNUSED_SYMBOL* is not actually used anywhere. Remove the unused functionality as we generally just remove unused code anyway. Reviewed-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2021-02-05init/gcov: allow CONFIG_CONSTRUCTORS on UML to fix module gcovJohannes Berg2-2/+7
On ARCH=um, loading a module doesn't result in its constructors getting called, which breaks module gcov since the debugfs files are never registered. On the other hand, in-kernel constructors have already been called by the dynamic linker, so we can't call them again. Get out of this conundrum by allowing CONFIG_CONSTRUCTORS to be selected, but avoiding the in-kernel constructor calls. Also remove the "if !UML" from GCOV selecting CONSTRUCTORS now, since we really do want CONSTRUCTORS, just not kernel binary ones. Link: https://lkml.kernel.org/r/20210120172041.c246a2cac2fb.I1358f584b76f1898373adfed77f4462c8705b736@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jessica Yu <jeyu@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-29fgraph: Initialize tracing_graph_pause at task creationSteven Rostedt (VMware)1-1/+2
On some archs, the idle task can call into cpu_suspend(). The cpu_suspend() will disable or pause function graph tracing, as there's some paths in bringing down the CPU that can have issues with its return address being modified. The task_struct structure has a "tracing_graph_pause" atomic counter, that when set to something other than zero, the function graph tracer will not modify the return address. The problem is that the tracing_graph_pause counter is initialized when the function graph tracer is enabled. This can corrupt the counter for the idle task if it is suspended in these architectures. CPU 1 CPU 2 ----- ----- do_idle() cpu_suspend() pause_graph_tracing() task_struct->tracing_graph_pause++ (0 -> 1) start_graph_tracing() for_each_online_cpu(cpu) { ftrace_graph_init_idle_task(cpu) task-struct->tracing_graph_pause = 0 (1 -> 0) unpause_graph_tracing() task_struct->tracing_graph_pause-- (0 -> -1) The above should have gone from 1 to zero, and enabled function graph tracing again. But instead, it is set to -1, which keeps it disabled. There's no reason that the field tracing_graph_pause on the task_struct can not be initialized at boot up. Cc: stable@vger.kernel.org Fixes: 380c4b1411ccd ("tracing/function-graph-tracer: append the tracing_graph_flag") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=211339 Reported-by: pierre.gondois@arm.com Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-01-29drivers: Remove CONFIG_OPROFILE supportViresh Kumar1-1/+1
The "oprofile" user-space tools don't use the kernel OPROFILE support any more, and haven't in a long time. User-space has been converted to the perf interfaces. Remove kernel's old oprofile support. Suggested-by: Christoph Hellwig <hch@infradead.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Robert Richter <rric@kernel.org> Acked-by: Paul E. McKenney <paulmck@kernel.org> #RCU Acked-by: William Cohen <wcohen@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2021-01-27init/Kconfig: Correct thermal pressure help textYue Hu1-1/+1
We're using arch_scale_thermal_pressure() to retrieve per CPU thermal pressure. Signed-off-by: Yue Hu <huyue2@yulong.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Link: https://lkml.kernel.org/r/20210127054451.1240-1-zbestahu@gmail.com
2021-01-14kbuild: lto: add a default list of used symbolsSami Tolvanen1-0/+1
With CONFIG_LTO_CLANG, LLVM bitcode has not yet been compiled into a binary when the .mod files are generated, which means they don't yet contain references to certain symbols that will be present in the final binaries. This includes intrinsic functions, such as memcpy, memmove, and memset [1], and stack protector symbols [2]. This change adds a default symbol list to use with CONFIG_TRIM_UNUSED_KSYMS when Clang's LTO is used. [1] https://llvm.org/docs/LangRef.html#standard-c-c-library-intrinsics [2] https://llvm.org/docs/LangRef.html#llvm-stackprotector-intrinsic Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20201211184633.3213045-7-samitolvanen@google.com
2021-01-08Revert "init/console: Use ttynull as a fallback when there is no console"Petr Mladek1-8/+2
This reverts commit 757055ae8dedf5333af17b3b5b4b70ba9bc9da4e. The commit caused that ttynull was used as the default console on several systems[1][2][3]. As a result, the console was blank even when a better alternative existed. It happened when there was no console configured on the command line and ttynull_init() was the first initcall calling register_console(). Or it happened when /dev/ did not exist when console_on_rootfs() was called. It was not able to open /dev/console even though a console driver was registered. It tried to add ttynull console but it obviously did not help. But ttynull became the preferred console and was used by /dev/console when it was available later. The commit tried to fix a historical problem that have been there for ages. The primary motivation was the commit 3cffa06aeef7ece30f6 ("printk/console: Allow to disable console output by using console="" or console=null"). It provided a clean solution for a workaround that was widely used and worked only by chance. This revert causes that the console="" or console=null command line options will again work only by chance. These options will cause that a particular console will be preferred and the default (tty) ones will not get enabled. There will be no console registered at all. As a result there won't be stdin, stdout, and stderr for the init process. But it worked exactly this way even before. The proper solution has to fulfill many conditions: + Register ttynull only when explicitly required or as the ultimate fallback. + ttynull should get associated with /dev/console but it must not become preferred console when used as a fallback. Especially, it must still be possible to replace it by a better console later. Such a change requires clean up of the register_console() code. Otherwise, it would be even harder to follow. Especially, the use of has_preferred_console and CON_CONSDEV flag is tricky. The clean up is risky. The ordering of consoles is not well defined. And any changes tend to break existing user settings. Do the revert at the least risky solution for now. [1] https://lore.kernel.org/linux-kselftest/20201221144302.GR4077@smile.fi.intel.com/ [2] https://lore.kernel.org/lkml/d2a3b3c0-e548-7dd1-730f-59bc5c04e191@synopsys.com/ [3] https://patchwork.ozlabs.org/project/linux-um/patch/20210105120128.10854-1-thomas@m3y3r.de/ Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by: Vineet Gupta <vgupta@synopsys.com> Reported-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-04Merge branch 'rcu/urgent' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU fix from Paul McKenney: "This is a fix for a regression in the v5.10 merge window, but it was reported quite late in the v5.10 process, plus generating and testing the fix took some time. The regression is due to commit 36dadef23fcc ("kprobes: Init kprobes in early_initcall") which on powerpc can use RCU Tasks before initialization, resulting in boot failures. The fix is straightforward, simply moving initialization of RCU Tasks before the early_initcall()s. The fix has been exposed to -next and kbuild test robot testing, and has been tested by the PowerPC guys" * 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: rcu-tasks: Move RCU-tasks initialization to before early_initcall()
2020-12-22kasan, arm64: only use kasan_depth for software modesAndrey Konovalov1-1/+1
This is a preparatory commit for the upcoming addition of a new hardware tag-based (MTE-based) KASAN mode. Hardware tag-based KASAN won't use kasan_depth. Only define and use it when one of the software KASAN modes are enabled. No functional changes for software modes. Link: https://lkml.kernel.org/r/e16f15aeda90bc7fb4dfc2e243a14b74cc5c8219.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-16Merge tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-blockLinus Torvalds1-143/+128
Pull block updates from Jens Axboe: "Another series of killing more code than what is being added, again thanks to Christoph's relentless cleanups and tech debt tackling. This contains: - blk-iocost improvements (Baolin Wang) - part0 iostat fix (Jeffle Xu) - Disable iopoll for split bios (Jeffle Xu) - block tracepoint cleanups (Christoph Hellwig) - Merging of struct block_device and hd_struct (Christoph Hellwig) - Rework/cleanup of how block device sizes are updated (Christoph Hellwig) - Simplification of gendisk lookup and removal of block device aliasing (Christoph Hellwig) - Block device ioctl cleanups (Christoph Hellwig) - Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig) - Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig) - sbitmap improvements (Pavel Begunkov) - Hybrid polling fix (Pavel Begunkov) - bvec iteration improvements (Pavel Begunkov) - Zone revalidation fixes (Damien Le Moal) - blk-throttle limit fix (Yu Kuai) - Various little fixes" * tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits) blk-mq: fix msec comment from micro to milli seconds blk-mq: update arg in comment of blk_mq_map_queue blk-mq: add helper allocating tagset->tags Revert "block: Fix a lockdep complaint triggered by request queue flushing" nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class blk-mq: add new API of blk_mq_hctx_set_fq_lock_class block: disable iopoll for split bio block: Improve blk_revalidate_disk_zones() checks sbitmap: simplify wrap check sbitmap: replace CAS with atomic and sbitmap: remove swap_lock sbitmap: optimise sbitmap_deferred_clear() blk-mq: skip hybrid polling if iopoll doesn't spin blk-iocost: Factor out the base vrate change into a separate function blk-iocost: Factor out the active iocgs' state check into a separate function blk-iocost: Move the usage ratio calculation to the correct place blk-iocost: Remove unnecessary advance declaration blk-iocost: Fix some typos in comments blktrace: fix up a kerneldoc comment block: remove the request_queue to argument request based tracepoints ...
2020-12-16Merge tag 'printk-for-5.11' of ↵Linus Torvalds1-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Finally allow parallel writes and reads into/from the lockless ringbuffer. But it is not a complete solution. Readers are still serialized against each other. And nested writes are still prevented by printk_safe per-CPU buffers. - Use ttynull as the ultimate fallback for /dev/console. - Officially allow disabling console output by using console="" or console=null - A few code cleanups * tag 'printk-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: remove logbuf_lock writer-protection of ringbuffer printk: inline log_output(),log_store() in vprintk_store() printk: remove obsolete dead assignment printk/console: Allow to disable console output by using console="" or console=null init/console: Use ttynull as a fallback when there is no console printk: ringbuffer: Reference text_data_ring directly in callees.
2020-12-15Merge branch 'exec-update-lock-for-v5.11' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull exec-update-lock update from Eric Biederman: "The key point of this is to transform exec_update_mutex into a rw_semaphore so readers can be separated from writers. This makes it easier to understand what the holders of the lock are doing, and makes it harder to contend or deadlock on the lock. The real deadlock fix wound up in perf_event_open" * 'exec-update-lock-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: exec: Transform exec_update_mutex into a rw_semaphore
2020-12-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-3/+3
Merge misc updates from Andrew Morton: - a few random little subsystems - almost all of the MM patches which are staged ahead of linux-next material. I'll trickle to post-linux-next work in as the dependents get merged up. Subsystems affected by this patch series: kthread, kbuild, ide, ntfs, ocfs2, arch, and mm (slab-generic, slab, slub, dax, debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, hmm, vmalloc, documentation, kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction, oom-kill, migration, cma, page-poison, userfaultfd, zswap, zsmalloc, uaccess, zram, and cleanups). * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (200 commits) mm: cleanup kstrto*() usage mm: fix fall-through warnings for Clang mm: slub: convert sysfs sprintf family to sysfs_emit/sysfs_emit_at mm: shmem: convert shmem_enabled_show to use sysfs_emit_at mm:backing-dev: use sysfs_emit in macro defining functions mm: huge_memory: convert remaining use of sprintf to sysfs_emit and neatening mm: use sysfs_emit for struct kobject * uses mm: fix kernel-doc markups zram: break the strict dependency from lzo zram: add stat to gather incompressible pages since zram set up zram: support page writeback mm/process_vm_access: remove redundant initialization of iov_r mm/zsmalloc.c: rework the list_add code in insert_zspage() mm/zswap: move to use crypto_acomp API for hardware acceleration mm/zswap: fix passing zero to 'PTR_ERR' warning mm/zswap: make struct kernel_param_ops definitions const userfaultfd/selftests: hint the test runner on required privilege userfaultfd/selftests: fix retval check for userfaultfd_open() userfaultfd/selftests: always dump something in modes userfaultfd: selftests: make __{s,u}64 format specifiers portable ...
2020-12-15mm, page_alloc: do not rely on the order of page_poison and ↵Vlastimil Babka1-1/+1
init_on_alloc/free parameters Patch series "cleanup page poisoning", v3. I have identified a number of issues and opportunities for cleanup with CONFIG_PAGE_POISON and friends: - interaction with init_on_alloc and init_on_free parameters depends on the order of parameters (Patch 1) - the boot time enabling uses static key, but inefficienty (Patch 2) - sanity checking is incompatible with hibernation (Patch 3) - CONFIG_PAGE_POISONING_NO_SANITY can be removed now that we have init_on_free (Patch 4) - CONFIG_PAGE_POISONING_ZERO can be most likely removed now that we have init_on_free (Patch 5) This patch (of 5): Enabling page_poison=1 together with init_on_alloc=1 or init_on_free=1 produces a warning in dmesg that page_poison takes precedence. However, as these warnings are printed in early_param handlers for init_on_alloc/free, they are not printed if page_poison is enabled later on the command line (handlers are called in the order of their parameters), or when init_on_alloc/free is always enabled by the respective config option - before the page_poison early param handler is called, it is not considered to be enabled. This is inconsistent. We can remove the dependency on order by making the init_on_* parameters only set a boolean variable, and postponing the evaluation after all early params have been processed. Introduce a new init_mem_debugging_and_hardening() function for that, and move the related debug_pagealloc processing there as well. As a result init_mem_debugging_and_hardening() knows always accurately if init_on_* and/or page_poison options were enabled. Thus we can also optimize want_init_on_alloc() and want_init_on_free(). We don't need to check page_poisoning_enabled() there, we can instead not enable the init_on_* static keys at all, if page poisoning is enabled. This results in a simpler and more effective code. Link: https://lkml.kernel.org/r/20201113104033.22907-1-vbabka@suse.cz Link: https://lkml.kernel.org/r/20201113104033.22907-2-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mateusz Nosek <mateusznosek0@gmail.com> Cc: Laura Abbott <labbott@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15init/main: fix broken buffer_init when DEFERRED_STRUCT_PAGE_INIT setLin Feng1-2/+0
In the booting phase if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set, we have following callchain: start_kernel ... mm_init mem_init memblock_free_all reset_all_zones_managed_pages free_low_memory_core_early ... buffer_init nr_free_buffer_pages zone->managed_pages ... rest_init kernel_init kernel_init_freeable page_alloc_init_late kthread_run(deferred_init_memmap, NODE_DATA(nid), "pgdatinit%d", nid); wait_for_completion(&pgdat_init_all_done_comp); ... files_maxfiles_init It's clear that buffer_init depends on zone->managed_pages, but it's reset in reset_all_zones_managed_pages after that pages are readded into zone->managed_pages, but when buffer_init runs this process is half done and most of them will finally be added till deferred_init_memmap done. In large memory couting of nr_free_buffer_pages drifts too much, also drifting from kernels to kernels on same hardware. Fix is simple, it delays buffer_init run till deferred_init_memmap all done. But as corrected by this patch, max_buffer_heads becomes very large, the value is roughly as many as 4 times of totalram_pages, formula: max_buffer_heads = nrpages * (10%) * (PAGE_SIZE / sizeof(struct buffer_head)); Say in a 64GB memory box we have 16777216 pages, then max_buffer_heads turns out to be roughly 67,108,864. In common cases, should a buffer_head be mapped to one page/block(4KB)? So max_buffer_heads never exceeds totalram_pages. IMO it's likely to make buffer_heads_over_limit bool value alwasy false, then make codes 'if (buffer_heads_over_limit)' test in vmscan unnecessary. So this patch will change the original behavior related to buffer_heads_over_limit in vmscan since we used a half done value of zone->managed_pages before, or should we use a smaller factor(<10%) in previous formula. akpm: I think this is OK - the max_buffer_heads code is only needed on highmem machines, to prevent ZONE_NORMAL from being consumed by large amounts of buffer_heads attached to highmem pagecache. This problem will not occur on 64-bit machines, so this feature's non-functionality on such machines is a feature, not a bug. Link: https://lkml.kernel.org/r/20201123110500.103523-1-linf@wangsu.com Signed-off-by: Lin Feng <linf@wangsu.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15mm: fix page_owner initializing issue for arm32Zhenhua Huang1-0/+2
Page owner of pages used by page owner itself used is missing on arm32 targets. The reason is dummy_handle and failure_handle is not initialized correctly. Buddy allocator is used to initialize these two handles. However, buddy allocator is not ready when page owner calls it. This change fixed that by initializing page owner after buddy initialization. The working flow before and after this change are: original logic: 1. allocated memory for page_ext(using memblock). 2. invoke the init callback of page_ext_ops like page_owner(using buddy allocator). 3. initialize buddy. after this change: 1. allocated memory for page_ext(using memblock). 2. initialize buddy. 3. invoke the init callback of page_ext_ops like page_owner(using buddy allocator). with the change, failure/dummy_handle can get its correct value and page owner output for example has the one for page owner itself: Page allocated via order 2, mask 0x6202c0(GFP_USER|__GFP_NOWARN), pid 1006, ts 67278156558 ns PFN 543776 type Unmovable Block 531 type Unmovable Flags 0x0() init_page_owner+0x28/0x2f8 invoke_init_callbacks_flatmem+0x24/0x34 start_kernel+0x33c/0x5d8 Link: https://lkml.kernel.org/r/1603104925-5888-1-git-send-email-zhenhuah@codeaurora.org Signed-off-by: Zhenhua Huang <zhenhuah@codeaurora.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-14Merge tag 'fixes-v5.11' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull misc fixes from Christian Brauner: "This contains several fixes which felt worth being combined into a single branch: - Use put_nsproxy() instead of open-coding it switch_task_namespaces() - Kirill's work to unify lifecycle management for all namespaces. The lifetime counters are used identically for all namespaces types. Namespaces may of course have additional unrelated counters and these are not altered. This work allows us to unify the type of the counters and reduces maintenance cost by moving the counter in one place and indicating that basic lifetime management is identical for all namespaces. - Peilin's fix adding three byte padding to Dmitry's PTRACE_GET_SYSCALL_INFO uapi struct to prevent an info leak. - Two smal patches to convert from the /* fall through */ comment annotation to the fallthrough keyword annotation which I had taken into my branch and into -next before df561f6688fe ("treewide: Use fallthrough pseudo-keyword") made it upstream which fixed this tree-wide. Since I didn't want to invalidate all testing for other commits I didn't rebase and kept them" * tag 'fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: nsproxy: use put_nsproxy() in switch_task_namespaces() sys: Convert to the new fallthrough notation signal: Convert to the new fallthrough notation time: Use generic ns_common::count cgroup: Use generic ns_common::count mnt: Use generic ns_common::count user: Use generic ns_common::count pid: Use generic ns_common::count ipc: Use generic ns_common::count uts: Use generic ns_common::count net: Use generic ns_common::count ns: Add a common refcount into ns_common ptrace: Prevent kernel-infoleak in ptrace_get_syscall_info()
2020-12-14Merge tag 's390-5.11-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: - Add support for the hugetlb_cma command line option to allocate gigantic hugepages using CMA - Add arch_get_random_long() support. - Add ap bus userspace notifications. - Increase default size of vmalloc area to 512GB and otherwise let it increase dynamically by the size of physical memory. This should fix all occurrences where the vmalloc area was not large enough. - Completely get rid of set_fs() (aka select SET_FS) and rework address space handling while doing that; making address space handling much more simple. - Reimplement getcpu vdso syscall in C. - Add support for extended SCLP responses (> 4k). This allows e.g. to handle also potential large system configurations. - Simplify KASAN by removing 3-level page table support and only supporting 4-levels from now on. - Improve debug-ability of the kernel decompressor code, which now prints also stack traces and symbols in case of problems to the console. - Remove more power management leftovers. - Other various fixes and improvements all over the place. * tag 's390-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (62 commits) s390/mm: add support to allocate gigantic hugepages using CMA s390/crypto: add arch_get_random_long() support s390/smp: perform initial CPU reset also for SMT siblings s390/mm: use invalid asce for user space when switching to init_mm s390/idle: fix accounting with machine checks s390/idle: add missing mt_cycles calculation s390/boot: add build-id to decompressor s390/kexec_file: fix diag308 subcode when loading crash kernel s390/cio: fix use-after-free in ccw_device_destroy_console s390/cio: remove pm support from ccw bus driver s390/cio: remove pm support from css-bus driver s390/cio: remove pm support from IO subchannel drivers s390/cio: remove pm support from chsc subchannel driver s390/vmur: remove unused pm related functions s390/tape: remove unsupported PM functions s390/cio: remove pm support from eadm-sch drivers s390: remove pm support from console drivers s390/dasd: remove unused pm related functions s390/zfcp: remove pm support from zfcp driver s390/ap: let bus_register() add the AP bus sysfs attributes ...
2020-12-14rcu-tasks: Move RCU-tasks initialization to before early_initcall()Uladzislau Rezki (Sony)1-0/+1
PowerPC testing encountered boot failures due to RCU Tasks not being fully initialized until core_initcall() time. This commit therefore initializes RCU Tasks (along with Rude RCU and RCU Tasks Trace) just before early_initcall() time, thus allowing waiting on RCU Tasks grace periods from early_initcall() handlers. Link: https://lore.kernel.org/rcu/87eekfh80a.fsf@dja-thinkpad.axtens.net/ Fixes: 36dadef23fcc ("kprobes: Init kprobes in early_initcall") Tested-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-12-14Merge branch 'for-5.11-null-console' into for-linusPetr Mladek1-2/+8
2020-12-11initramfs: fix clang build failureArnd Bergmann1-1/+1
There is only one function in init/initramfs.c that is in the .text section, and it is marked __weak. When building with clang-12 and the integrated assembler, this leads to a bug with recordmcount: ./scripts/recordmcount "init/initramfs.o" Cannot find symbol for section 2: .text. init/initramfs.o: failed I'm not quite sure what exactly goes wrong, but I notice that this function is only ever called from an __init function, and normally inlined. Marking it __init as well is clearly correct and it leads to recordmcount no longer complaining. Link: https://lkml.kernel.org/r/20201204165742.3815221-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Barret Rhoden <brho@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Privacy Policy