From f2e0a53271a439a2ab142645867f0cde45b2b3cd Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 19 May 2015 22:19:33 +0200 Subject: clk: Add a basic multiplier clock Some clocks are using a multiplier component, however, unlike their mux, gate or divider counterpart, these factors don't have a basic clock implementation. This leads to code duplication across platforms that want to use that kind of clocks, and the impossibility to use the composite clocks with such a clock without defining your own rate operations. Create such a driver in order to remove these issues, and hopefully factor the implementations, reducing code size across platforms and consolidating the various implementations. Signed-off-by: Maxime Ripard Reviewed-by: Chen-Yu Tsai --- include/linux/clk-provider.h | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) (limited to 'include') diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 3ecc07d0da77..6a7dfe33a317 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -518,6 +518,48 @@ struct clk *clk_register_fractional_divider(struct device *dev, void __iomem *reg, u8 mshift, u8 mwidth, u8 nshift, u8 nwidth, u8 clk_divider_flags, spinlock_t *lock); +/** + * struct clk_multiplier - adjustable multiplier clock + * + * @hw: handle between common and hardware-specific interfaces + * @reg: register containing the multiplier + * @shift: shift to the multiplier bit field + * @width: width of the multiplier bit field + * @lock: register lock + * + * Clock with an adjustable multiplier affecting its output frequency. + * Implements .recalc_rate, .set_rate and .round_rate + * + * Flags: + * CLK_MULTIPLIER_ZERO_BYPASS - By default, the multiplier is the value read + * from the register, with 0 being a valid value effectively + * zeroing the output clock rate. If CLK_MULTIPLIER_ZERO_BYPASS is + * set, then a null multiplier will be considered as a bypass, + * leaving the parent rate unmodified. + * CLK_MULTIPLIER_ROUND_CLOSEST - Makes the best calculated divider to be + * rounded to the closest integer instead of the down one. + */ +struct clk_multiplier { + struct clk_hw hw; + void __iomem *reg; + u8 shift; + u8 width; + u8 flags; + spinlock_t *lock; +}; + +#define CLK_MULTIPLIER_ZERO_BYPASS BIT(0) +#define CLK_MULTIPLIER_ROUND_CLOSEST BIT(1) + +extern const struct clk_ops clk_multiplier_ops; + +struct clk *clk_register_multiplier(struct device *dev, const char *name, + const char *parent_name, + unsigned long flags, + void __iomem *reg, u8 shift, u8 width, + u8 clk_mult_flags, spinlock_t *lock); +void clk_unregister_multiplier(struct clk *clk); + /*** * struct clk_composite - aggregate clock of mux, divider and gate clocks * -- cgit v1.2.1 From 460d0d444822e9032a2573fc051b45c68b89a97a Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 18 Jul 2014 15:48:35 -0300 Subject: clk: sunxi: Add a driver for the PLL2 The PLL2 on the A10 and later SoCs is the clock used for all the audio related operations. This clock has a somewhat complex output tree, with three outputs (2X, 4X and 8X) with a fixed divider from the base clock, and an output (1X) with a post divider. However, we can simplify things since the 1X divider can be fixed, and we end up by having a base clock not exposed to any device (or at least directly, since the 4X output doesn't have any divider), and 4 fixed divider clocks that will be exposed. This clock seems to have been introduced, at least in this form, in the revision B of the A10, but we don't have any information on the clock used on the revision A. Signed-off-by: Maxime Ripard Reviewed-by: Chen-Yu Tsai --- include/dt-bindings/clock/sun4i-a10-pll2.h | 53 ++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) create mode 100644 include/dt-bindings/clock/sun4i-a10-pll2.h (limited to 'include') diff --git a/include/dt-bindings/clock/sun4i-a10-pll2.h b/include/dt-bindings/clock/sun4i-a10-pll2.h new file mode 100644 index 000000000000..071c8112d531 --- /dev/null +++ b/include/dt-bindings/clock/sun4i-a10-pll2.h @@ -0,0 +1,53 @@ +/* + * Copyright 2015 Maxime Ripard + * + * Maxime Ripard + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef __DT_BINDINGS_CLOCK_SUN4I_A10_PLL2_H_ +#define __DT_BINDINGS_CLOCK_SUN4I_A10_PLL2_H_ + +#define SUN4I_A10_PLL2_1X 0 +#define SUN4I_A10_PLL2_2X 1 +#define SUN4I_A10_PLL2_4X 2 +#define SUN4I_A10_PLL2_8X 3 + +#endif /* __DT_BINDINGS_CLOCK_SUN4I_A10_PLL2_H_ */ -- cgit v1.2.1