aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/soc/xilinx/xlnx_vcu.c
blob: c1d6f1b190b64eb671cb5db15bab5e8d85cbc3b8 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
// SPDX-License-Identifier: GPL-2.0
/*
 * Xilinx VCU Init
 *
 * Copyright (C) 2016 - 2017 Xilinx, Inc.
 *
 * Contacts   Dhaval Shah <dshah@xilinx.com>
 */
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>

/* Address map for different registers implemented in the VCU LogiCORE IP. */
#define VCU_ECODER_ENABLE		0x00
#define VCU_DECODER_ENABLE		0x04
#define VCU_MEMORY_DEPTH		0x08
#define VCU_ENC_COLOR_DEPTH		0x0c
#define VCU_ENC_VERTICAL_RANGE		0x10
#define VCU_ENC_FRAME_SIZE_X		0x14
#define VCU_ENC_FRAME_SIZE_Y		0x18
#define VCU_ENC_COLOR_FORMAT		0x1c
#define VCU_ENC_FPS			0x20
#define VCU_MCU_CLK			0x24
#define VCU_CORE_CLK			0x28
#define VCU_PLL_BYPASS			0x2c
#define VCU_ENC_CLK			0x30
#define VCU_PLL_CLK			0x34
#define VCU_ENC_VIDEO_STANDARD		0x38
#define VCU_STATUS			0x3c
#define VCU_AXI_ENC_CLK			0x40
#define VCU_AXI_DEC_CLK			0x44
#define VCU_AXI_MCU_CLK			0x48
#define VCU_DEC_VIDEO_STANDARD		0x4c
#define VCU_DEC_FRAME_SIZE_X		0x50
#define VCU_DEC_FRAME_SIZE_Y		0x54
#define VCU_DEC_FPS			0x58
#define VCU_BUFFER_B_FRAME		0x5c
#define VCU_WPP_EN			0x60
#define VCU_PLL_CLK_DEC			0x64
#define VCU_GASKET_INIT			0x74
#define VCU_GASKET_VALUE		0x03

/* vcu slcr registers, bitmask and shift */
#define VCU_PLL_CTRL			0x24
#define VCU_PLL_CTRL_RESET_MASK		0x01
#define VCU_PLL_CTRL_RESET_SHIFT	0
#define VCU_PLL_CTRL_BYPASS_MASK	0x01
#define VCU_PLL_CTRL_BYPASS_SHIFT	3
#define VCU_PLL_CTRL_FBDIV_MASK		0x7f
#define VCU_PLL_CTRL_FBDIV_SHIFT	8
#define VCU_PLL_CTRL_POR_IN_MASK	0x01
#define VCU_PLL_CTRL_POR_IN_SHIFT	1
#define VCU_PLL_CTRL_PWR_POR_MASK	0x01
#define VCU_PLL_CTRL_PWR_POR_SHIFT	2
#define VCU_PLL_CTRL_CLKOUTDIV_MASK	0x03
#define VCU_PLL_CTRL_CLKOUTDIV_SHIFT	16
#define VCU_PLL_CTRL_DEFAULT		0
#define VCU_PLL_DIV2			2

#define VCU_PLL_CFG			0x28
#define VCU_PLL_CFG_RES_MASK		0x0f
#define VCU_PLL_CFG_RES_SHIFT		0
#define VCU_PLL_CFG_CP_MASK		0x0f
#define VCU_PLL_CFG_CP_SHIFT		5
#define VCU_PLL_CFG_LFHF_MASK		0x03
#define VCU_PLL_CFG_LFHF_SHIFT		10
#define VCU_PLL_CFG_LOCK_CNT_MASK	0x03ff
#define VCU_PLL_CFG_LOCK_CNT_SHIFT	13
#define VCU_PLL_CFG_LOCK_DLY_MASK	0x7f
#define VCU_PLL_CFG_LOCK_DLY_SHIFT	25
#define VCU_ENC_CORE_CTRL		0x30
#define VCU_ENC_MCU_CTRL		0x34
#define VCU_DEC_CORE_CTRL		0x38
#define VCU_DEC_MCU_CTRL		0x3c
#define VCU_PLL_DIVISOR_MASK		0x3f
#define VCU_PLL_DIVISOR_SHIFT		4
#define VCU_SRCSEL_MASK			0x01
#define VCU_SRCSEL_SHIFT		0
#define VCU_SRCSEL_PLL			1

#define VCU_PLL_STATUS			0x60
#define VCU_PLL_STATUS_LOCK_STATUS_MASK	0x01

#define MHZ				1000000
#define FVCO_MIN			(1500U * MHZ)
#define FVCO_MAX			(3000U * MHZ)
#define DIVISOR_MIN			0
#define DIVISOR_MAX			63
#define FRAC				100
#define LIMIT				(10 * MHZ)

/**
 * struct xvcu_device - Xilinx VCU init device structure
 * @dev: Platform device
 * @pll_ref: pll ref clock source
 * @aclk: axi clock source
 * @logicore_reg_ba: logicore reg base address
 * @vcu_slcr_ba: vcu_slcr Register base address
 * @coreclk: core clock frequency
 */
struct xvcu_device {
	struct device *dev;
	struct clk *pll_ref;
	struct clk *aclk;
	void __iomem *logicore_reg_ba;
	void __iomem *vcu_slcr_ba;
	u32 coreclk;
};

/**
 * struct xvcu_pll_cfg - Helper data
 * @fbdiv: The integer portion of the feedback divider to the PLL
 * @cp: PLL charge pump control
 * @res: PLL loop filter resistor control
 * @lfhf: PLL loop filter high frequency capacitor control
 * @lock_dly: Lock circuit configuration settings for lock windowsize
 * @lock_cnt: Lock circuit counter setting
 */
struct xvcu_pll_cfg {
	u32 fbdiv;
	u32 cp;
	u32 res;
	u32 lfhf;
	u32 lock_dly;
	u32 lock_cnt;
};

static const struct xvcu_pll_cfg xvcu_pll_cfg[] = {
	{ 25, 3, 10, 3, 63, 1000 },
	{ 26, 3, 10, 3, 63, 1000 },
	{ 27, 4, 6, 3, 63, 1000 },
	{ 28, 4, 6, 3, 63, 1000 },
	{ 29, 4, 6, 3, 63, 1000 },
	{ 30, 4, 6, 3, 63, 1000 },
	{ 31, 6, 1, 3, 63, 1000 },
	{ 32, 6, 1, 3, 63, 1000 },
	{ 33, 4, 10, 3, 63, 1000 },
	{ 34, 5, 6, 3, 63, 1000 },
	{ 35, 5, 6, 3, 63, 1000 },
	{ 36, 5, 6, 3, 63, 1000 },
	{ 37, 5, 6, 3, 63, 1000 },
	{ 38, 5, 6, 3, 63, 975 },
	{ 39, 3, 12, 3, 63, 950 },
	{ 40, 3, 12, 3, 63, 925 },
	{ 41, 3, 12, 3, 63, 900 },
	{ 42, 3, 12, 3, 63, 875 },
	{ 43, 3, 12, 3, 63, 850 },
	{ 44, 3, 12, 3, 63, 850 },
	{ 45, 3, 12, 3, 63, 825 },
	{ 46, 3, 12, 3, 63, 800 },
	{ 47, 3, 12, 3, 63, 775 },
	{ 48, 3, 12, 3, 63, 775 },
	{ 49, 3, 12, 3, 63, 750 },
	{ 50, 3, 12, 3, 63, 750 },
	{ 51, 3, 2, 3, 63, 725 },
	{ 52, 3, 2, 3, 63, 700 },
	{ 53, 3, 2, 3, 63, 700 },
	{ 54, 3, 2, 3, 63, 675 },
	{ 55, 3, 2, 3, 63, 675 },
	{ 56, 3, 2, 3, 63, 650 },
	{ 57, 3, 2, 3, 63, 650 },
	{ 58, 3, 2, 3, 63, 625 },
	{ 59, 3, 2, 3, 63, 625 },
	{ 60, 3, 2, 3, 63, 625 },
	{ 61, 3, 2, 3, 63, 600 },
	{ 62, 3, 2, 3, 63, 600 },
	{ 63, 3, 2, 3, 63, 600 },
	{ 64, 3, 2, 3, 63, 600 },
	{ 65, 3, 2, 3, 63, 600 },
	{ 66, 3, 2, 3, 63, 600 },
	{ 67, 3, 2, 3, 63, 600 },
	{ 68, 3, 2, 3, 63, 600 },
	{ 69, 3, 2, 3, 63, 600 },
	{ 70, 3, 2, 3, 63, 600 },
	{ 71, 3, 2, 3, 63, 600 },
	{ 72, 3, 2, 3, 63, 600 },
	{ 73, 3, 2, 3, 63, 600 },
	{ 74, 3, 2, 3, 63, 600 },
	{ 75, 3, 2, 3, 63, 600 },
	{ 76, 3, 2, 3, 63, 600 },
	{ 77, 3, 2, 3, 63, 600 },
	{ 78, 3, 2, 3, 63, 600 },
	{ 79, 3, 2, 3, 63, 600 },
	{ 80, 3, 2, 3, 63, 600 },
	{ 81, 3, 2, 3, 63, 600 },
	{ 82, 3, 2, 3, 63, 600 },
	{ 83, 4, 2, 3, 63, 600 },
	{ 84, 4, 2, 3, 63, 600 },
	{ 85, 4, 2, 3, 63, 600 },
	{ 86, 4, 2, 3, 63, 600 },
	{ 87, 4, 2, 3, 63, 600 },
	{ 88, 4, 2, 3, 63, 600 },
	{ 89, 4, 2, 3, 63, 600 },
	{ 90, 4, 2, 3, 63, 600 },
	{ 91, 4, 2, 3, 63, 600 },
	{ 92, 4, 2, 3, 63, 600 },
	{ 93, 4, 2, 3, 63, 600 },
	{ 94, 4, 2, 3, 63, 600 },
	{ 95, 4, 2, 3, 63, 600 },
	{ 96, 4, 2, 3, 63, 600 },
	{ 97, 4, 2, 3, 63, 600 },
	{ 98, 4, 2, 3, 63, 600 },
	{ 99, 4, 2, 3, 63, 600 },
	{ 100, 4, 2, 3, 63, 600 },
	{ 101, 4, 2, 3, 63, 600 },
	{ 102, 4, 2, 3, 63, 600 },
	{ 103, 5, 2, 3, 63, 600 },
	{ 104, 5, 2, 3, 63, 600 },
	{ 105, 5, 2, 3, 63, 600 },
	{ 106, 5, 2, 3, 63, 600 },
	{ 107, 3, 4, 3, 63, 600 },
	{ 108, 3, 4, 3, 63, 600 },
	{ 109, 3, 4, 3, 63, 600 },
	{ 110, 3, 4, 3, 63, 600 },
	{ 111, 3, 4, 3, 63, 600 },
	{ 112, 3, 4, 3, 63, 600 },
	{ 113, 3, 4, 3, 63, 600 },
	{ 114, 3, 4, 3, 63, 600 },
	{ 115, 3, 4, 3, 63, 600 },
	{ 116, 3, 4, 3, 63, 600 },
	{ 117, 3, 4, 3, 63, 600 },
	{ 118, 3, 4, 3, 63, 600 },
	{ 119, 3, 4, 3, 63, 600 },
	{ 120, 3, 4, 3, 63, 600 },
	{ 121, 3, 4, 3, 63, 600 },
	{ 122, 3, 4, 3, 63, 600 },
	{ 123, 3, 4, 3, 63, 600 },
	{ 124, 3, 4, 3, 63, 600 },
	{ 125, 3, 4, 3, 63, 600 },
};

/**
 * xvcu_read - Read from the VCU register space
 * @iomem:	vcu reg space base address
 * @offset:	vcu reg offset from base
 *
 * Return:	Returns 32bit value from VCU register specified
 *
 */
static inline u32 xvcu_read(void __iomem *iomem, u32 offset)
{
	return ioread32(iomem + offset);
}

/**
 * xvcu_write - Write to the VCU register space
 * @iomem:	vcu reg space base address
 * @offset:	vcu reg offset from base
 * @value:	Value to write
 */
static inline void xvcu_write(void __iomem *iomem, u32 offset, u32 value)
{
	iowrite32(value, iomem + offset);
}

/**
 * xvcu_write_field_reg - Write to the vcu reg field
 * @iomem:	vcu reg space base address
 * @offset:	vcu reg offset from base
 * @field:	vcu reg field to write to
 * @mask:	vcu reg mask
 * @shift:	vcu reg number of bits to shift the bitfield
 */
static void xvcu_write_field_reg(void __iomem *iomem, int offset,
				 u32 field, u32 mask, int shift)
{
	u32 val = xvcu_read(iomem, offset);

	val &= ~(mask << shift);
	val |= (field & mask) << shift;

	xvcu_write(iomem, offset, val);
}

/**
 * xvcu_set_vcu_pll_info - Set the VCU PLL info
 * @xvcu:	Pointer to the xvcu_device structure
 *
 * Programming the VCU PLL based on the user configuration
 * (ref clock freq, core clock freq, mcu clock freq).
 * Core clock frequency has higher priority than mcu clock frequency
 * Errors in following cases
 *    - When mcu or clock clock get from logicoreIP is 0
 *    - When VCU PLL DIV related bits value other than 1
 *    - When proper data not found for given data
 *    - When sis570_1 clocksource related operation failed
 *
 * Return:	Returns status, either success or error+reason
 */
static int xvcu_set_vcu_pll_info(struct xvcu_device *xvcu)
{
	u32 refclk, coreclk, mcuclk, inte, deci;
	u32 divisor_mcu, divisor_core, fvco;
	u32 clkoutdiv, vcu_pll_ctrl, pll_clk;
	u32 cfg_val, mod, ctrl;
	int ret, i;
	const struct xvcu_pll_cfg *found = NULL;

	inte = xvcu_read(xvcu->logicore_reg_ba, VCU_PLL_CLK);
	deci = xvcu_read(xvcu->logicore_reg_ba, VCU_PLL_CLK_DEC);
	coreclk = xvcu_read(xvcu->logicore_reg_ba, VCU_CORE_CLK) * MHZ;
	mcuclk = xvcu_read(xvcu->logicore_reg_ba, VCU_MCU_CLK) * MHZ;
	if (!mcuclk || !coreclk) {
		dev_err(xvcu->dev, "Invalid mcu and core clock data\n");
		return -EINVAL;
	}

	refclk = (inte * MHZ) + (deci * (MHZ / FRAC));
	dev_dbg(xvcu->dev, "Ref clock from logicoreIP is %uHz\n", refclk);
	dev_dbg(xvcu->dev, "Core clock from logicoreIP is %uHz\n", coreclk);
	dev_dbg(xvcu->dev, "Mcu clock from logicoreIP is %uHz\n", mcuclk);

	clk_disable_unprepare(xvcu->pll_ref);
	ret = clk_set_rate(xvcu->pll_ref, refclk);
	if (ret)
		dev_warn(xvcu->dev, "failed to set logicoreIP refclk rate\n");

	ret = clk_prepare_enable(xvcu->pll_ref);
	if (ret) {
		dev_err(xvcu->dev, "failed to enable pll_ref clock source\n");
		return ret;
	}

	refclk = clk_get_rate(xvcu->pll_ref);

	/*
	 * The divide-by-2 should be always enabled (==1)
	 * to meet the timing in the design.
	 * Otherwise, it's an error
	 */
	vcu_pll_ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_PLL_CTRL);
	clkoutdiv = vcu_pll_ctrl >> VCU_PLL_CTRL_CLKOUTDIV_SHIFT;
	clkoutdiv = clkoutdiv && VCU_PLL_CTRL_CLKOUTDIV_MASK;
	if (clkoutdiv != 1) {
		dev_err(xvcu->dev, "clkoutdiv value is invalid\n");
		return -EINVAL;
	}

	for (i = ARRAY_SIZE(xvcu_pll_cfg) - 1; i >= 0; i--) {
		const struct xvcu_pll_cfg *cfg = &xvcu_pll_cfg[i];

		fvco = cfg->fbdiv * refclk;
		if (fvco >= FVCO_MIN && fvco <= FVCO_MAX) {
			pll_clk = fvco / VCU_PLL_DIV2;
			if (fvco % VCU_PLL_DIV2 != 0)
				pll_clk++;
			mod = pll_clk % coreclk;
			if (mod < LIMIT) {
				divisor_core = pll_clk / coreclk;
			} else if (coreclk - mod < LIMIT) {
				divisor_core = pll_clk / coreclk;
				divisor_core++;
			} else {
				continue;
			}
			if (divisor_core >= DIVISOR_MIN &&
			    divisor_core <= DIVISOR_MAX) {
				found = cfg;
				divisor_mcu = pll_clk / mcuclk;
				mod = pll_clk % mcuclk;
				if (mcuclk - mod < LIMIT)
					divisor_mcu++;
				break;
			}
		}
	}

	if (!found) {
		dev_err(xvcu->dev, "Invalid clock combination.\n");
		return -EINVAL;
	}

	xvcu->coreclk = pll_clk / divisor_core;
	mcuclk = pll_clk / divisor_mcu;
	dev_dbg(xvcu->dev, "Actual Ref clock freq is %uHz\n", refclk);
	dev_dbg(xvcu->dev, "Actual Core clock freq is %uHz\n", xvcu->coreclk);
	dev_dbg(xvcu->dev, "Actual Mcu clock freq is %uHz\n", mcuclk);

	vcu_pll_ctrl &= ~(VCU_PLL_CTRL_FBDIV_MASK << VCU_PLL_CTRL_FBDIV_SHIFT);
	vcu_pll_ctrl |= (found->fbdiv & VCU_PLL_CTRL_FBDIV_MASK) <<
			 VCU_PLL_CTRL_FBDIV_SHIFT;
	vcu_pll_ctrl &= ~(VCU_PLL_CTRL_POR_IN_MASK <<
			  VCU_PLL_CTRL_POR_IN_SHIFT);
	vcu_pll_ctrl |= (VCU_PLL_CTRL_DEFAULT & VCU_PLL_CTRL_POR_IN_MASK) <<
			 VCU_PLL_CTRL_POR_IN_SHIFT;
	vcu_pll_ctrl &= ~(VCU_PLL_CTRL_PWR_POR_MASK <<
			  VCU_PLL_CTRL_PWR_POR_SHIFT);
	vcu_pll_ctrl |= (VCU_PLL_CTRL_DEFAULT & VCU_PLL_CTRL_PWR_POR_MASK) <<
			 VCU_PLL_CTRL_PWR_POR_SHIFT;
	xvcu_write(xvcu->vcu_slcr_ba, VCU_PLL_CTRL, vcu_pll_ctrl);

	/* Set divisor for the core and mcu clock */
	ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_ENC_CORE_CTRL);
	ctrl &= ~(VCU_PLL_DIVISOR_MASK << VCU_PLL_DIVISOR_SHIFT);
	ctrl |= (divisor_core & VCU_PLL_DIVISOR_MASK) <<
		 VCU_PLL_DIVISOR_SHIFT;
	ctrl &= ~(VCU_SRCSEL_MASK << VCU_SRCSEL_SHIFT);
	ctrl |= (VCU_SRCSEL_PLL & VCU_SRCSEL_MASK) << VCU_SRCSEL_SHIFT;
	xvcu_write(xvcu->vcu_slcr_ba, VCU_ENC_CORE_CTRL, ctrl);

	ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_DEC_CORE_CTRL);
	ctrl &= ~(VCU_PLL_DIVISOR_MASK << VCU_PLL_DIVISOR_SHIFT);
	ctrl |= (divisor_core & VCU_PLL_DIVISOR_MASK) <<
		 VCU_PLL_DIVISOR_SHIFT;
	ctrl &= ~(VCU_SRCSEL_MASK << VCU_SRCSEL_SHIFT);
	ctrl |= (VCU_SRCSEL_PLL & VCU_SRCSEL_MASK) << VCU_SRCSEL_SHIFT;
	xvcu_write(xvcu->vcu_slcr_ba, VCU_DEC_CORE_CTRL, ctrl);

	ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_ENC_MCU_CTRL);
	ctrl &= ~(VCU_PLL_DIVISOR_MASK << VCU_PLL_DIVISOR_SHIFT);
	ctrl |= (divisor_mcu & VCU_PLL_DIVISOR_MASK) << VCU_PLL_DIVISOR_SHIFT;
	ctrl &= ~(VCU_SRCSEL_MASK << VCU_SRCSEL_SHIFT);
	ctrl |= (VCU_SRCSEL_PLL & VCU_SRCSEL_MASK) << VCU_SRCSEL_SHIFT;
	xvcu_write(xvcu->vcu_slcr_ba, VCU_ENC_MCU_CTRL, ctrl);

	ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_DEC_MCU_CTRL);
	ctrl &= ~(VCU_PLL_DIVISOR_MASK << VCU_PLL_DIVISOR_SHIFT);
	ctrl |= (divisor_mcu & VCU_PLL_DIVISOR_MASK) << VCU_PLL_DIVISOR_SHIFT;
	ctrl &= ~(VCU_SRCSEL_MASK << VCU_SRCSEL_SHIFT);
	ctrl |= (VCU_SRCSEL_PLL & VCU_SRCSEL_MASK) << VCU_SRCSEL_SHIFT;
	xvcu_write(xvcu->vcu_slcr_ba, VCU_DEC_MCU_CTRL, ctrl);

	/* Set RES, CP, LFHF, LOCK_CNT and LOCK_DLY cfg values */
	cfg_val = (found->res << VCU_PLL_CFG_RES_SHIFT) |
		   (found->cp << VCU_PLL_CFG_CP_SHIFT) |
		   (found->lfhf << VCU_PLL_CFG_LFHF_SHIFT) |
		   (found->lock_cnt << VCU_PLL_CFG_LOCK_CNT_SHIFT) |
		   (found->lock_dly << VCU_PLL_CFG_LOCK_DLY_SHIFT);
	xvcu_write(xvcu->vcu_slcr_ba, VCU_PLL_CFG, cfg_val);

	return 0;
}

/**
 * xvcu_set_pll - PLL init sequence
 * @xvcu:	Pointer to the xvcu_device structure
 *
 * Call the api to set the PLL info and once that is done then
 * init the PLL sequence to make the PLL stable.
 *
 * Return:	Returns status, either success or error+reason
 */
static int xvcu_set_pll(struct xvcu_device *xvcu)
{
	u32 lock_status;
	unsigned long timeout;
	int ret;

	ret = xvcu_set_vcu_pll_info(xvcu);
	if (ret) {
		dev_err(xvcu->dev, "failed to set pll info\n");
		return ret;
	}

	xvcu_write_field_reg(xvcu->vcu_slcr_ba, VCU_PLL_CTRL,
			     1, VCU_PLL_CTRL_BYPASS_MASK,
			     VCU_PLL_CTRL_BYPASS_SHIFT);
	xvcu_write_field_reg(xvcu->vcu_slcr_ba, VCU_PLL_CTRL,
			     1, VCU_PLL_CTRL_RESET_MASK,
			     VCU_PLL_CTRL_RESET_SHIFT);
	xvcu_write_field_reg(xvcu->vcu_slcr_ba, VCU_PLL_CTRL,
			     0, VCU_PLL_CTRL_RESET_MASK,
			     VCU_PLL_CTRL_RESET_SHIFT);
	/*
	 * Defined the timeout for the max time to wait the
	 * PLL_STATUS to be locked.
	 */
	timeout = jiffies + msecs_to_jiffies(2000);
	do {
		lock_status = xvcu_read(xvcu->vcu_slcr_ba, VCU_PLL_STATUS);
		if (lock_status & VCU_PLL_STATUS_LOCK_STATUS_MASK) {
			xvcu_write_field_reg(xvcu->vcu_slcr_ba, VCU_PLL_CTRL,
					     0, VCU_PLL_CTRL_BYPASS_MASK,
					     VCU_PLL_CTRL_BYPASS_SHIFT);
			return 0;
		}
	} while (!time_after(jiffies, timeout));

	/* PLL is not locked even after the timeout of the 2sec */
	dev_err(xvcu->dev, "PLL is not locked\n");
	return -ETIMEDOUT;
}

/**
 * xvcu_probe - Probe existence of the logicoreIP
 *			and initialize PLL
 *
 * @pdev:	Pointer to the platform_device structure
 *
 * Return:	Returns 0 on success
 *		Negative error code otherwise
 */
static int xvcu_probe(struct platform_device *pdev)
{
	struct resource *res;
	struct xvcu_device *xvcu;
	int ret;

	xvcu = devm_kzalloc(&pdev->dev, sizeof(*xvcu), GFP_KERNEL);
	if (!xvcu)
		return -ENOMEM;

	xvcu->dev = &pdev->dev;
	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "vcu_slcr");
	if (!res) {
		dev_err(&pdev->dev, "get vcu_slcr memory resource failed.\n");
		return -ENODEV;
	}

	xvcu->vcu_slcr_ba = devm_ioremap_nocache(&pdev->dev, res->start,
						 resource_size(res));
	if (!xvcu->vcu_slcr_ba) {
		dev_err(&pdev->dev, "vcu_slcr register mapping failed.\n");
		return -ENOMEM;
	}

	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "logicore");
	if (!res) {
		dev_err(&pdev->dev, "get logicore memory resource failed.\n");
		return -ENODEV;
	}

	xvcu->logicore_reg_ba = devm_ioremap_nocache(&pdev->dev, res->start,
						     resource_size(res));
	if (!xvcu->logicore_reg_ba) {
		dev_err(&pdev->dev, "logicore register mapping failed.\n");
		return -ENOMEM;
	}

	xvcu->aclk = devm_clk_get(&pdev->dev, "aclk");
	if (IS_ERR(xvcu->aclk)) {
		dev_err(&pdev->dev, "Could not get aclk clock\n");
		return PTR_ERR(xvcu->aclk);
	}

	xvcu->pll_ref = devm_clk_get(&pdev->dev, "pll_ref");
	if (IS_ERR(xvcu->pll_ref)) {
		dev_err(&pdev->dev, "Could not get pll_ref clock\n");
		return PTR_ERR(xvcu->pll_ref);
	}

	ret = clk_prepare_enable(xvcu->aclk);
	if (ret) {
		dev_err(&pdev->dev, "aclk clock enable failed\n");
		return ret;
	}

	ret = clk_prepare_enable(xvcu->pll_ref);
	if (ret) {
		dev_err(&pdev->dev, "pll_ref clock enable failed\n");
		goto error_aclk;
	}

	/*
	 * Do the Gasket isolation and put the VCU out of reset
	 * Bit 0 : Gasket isolation
	 * Bit 1 : put VCU out of reset
	 */
	xvcu_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, VCU_GASKET_VALUE);

	/* Do the PLL Settings based on the ref clk,core and mcu clk freq */
	ret = xvcu_set_pll(xvcu);
	if (ret) {
		dev_err(&pdev->dev, "Failed to set the pll\n");
		goto error_pll_ref;
	}

	dev_set_drvdata(&pdev->dev, xvcu);

	dev_info(&pdev->dev, "%s: Probed successfully\n", __func__);

	return 0;

error_pll_ref:
	clk_disable_unprepare(xvcu->pll_ref);
error_aclk:
	clk_disable_unprepare(xvcu->aclk);
	return ret;
}

/**
 * xvcu_remove - Insert gasket isolation
 *			and disable the clock
 * @pdev:	Pointer to the platform_device structure
 *
 * Return:	Returns 0 on success
 *		Negative error code otherwise
 */
static int xvcu_remove(struct platform_device *pdev)
{
	struct xvcu_device *xvcu;

	xvcu = platform_get_drvdata(pdev);
	if (!xvcu)
		return -ENODEV;

	/* Add the the Gasket isolation and put the VCU in reset. */
	xvcu_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, 0);

	clk_disable_unprepare(xvcu->pll_ref);
	clk_disable_unprepare(xvcu->aclk);

	return 0;
}

static const struct of_device_id xvcu_of_id_table[] = {
	{ .compatible = "xlnx,vcu" },
	{ .compatible = "xlnx,vcu-logicoreip-1.0" },
	{ }
};
MODULE_DEVICE_TABLE(of, xvcu_of_id_table);

static struct platform_driver xvcu_driver = {
	.driver = {
		.name           = "xilinx-vcu",
		.of_match_table = xvcu_of_id_table,
	},
	.probe                  = xvcu_probe,
	.remove                 = xvcu_remove,
};

module_platform_driver(xvcu_driver);

MODULE_AUTHOR("Dhaval Shah <dshah@xilinx.com>");
MODULE_DESCRIPTION("Xilinx VCU init Driver");
MODULE_LICENSE("GPL v2");

Privacy Policy