path: root/Documentation/devicetree/bindings/media/video-interfaces.txt
diff options
authorSakari Ailus <sakari.ailus@iki.fi>2017-02-06 04:49:57 -0500
committerMauro Carvalho Chehab <mchehab@s-opensource.com>2017-07-19 15:30:12 -0400
commit4303a0c9596f1c23fe3bcaa220e55f4d918942d6 (patch)
treed460d82e6a1d3d33fe308a8d5bb2503a78afe1c8 /Documentation/devicetree/bindings/media/video-interfaces.txt
parent8056402c54dcc7fcae48e28e51af3ca07f9480ff (diff)
media: dt: bindings: Explicitly specify bus type
In the vast majority of cases the bus type is known to the driver(s) since a receiver or transmitter can only support a single one. There are cases however where different options are possible, or the bus type cannot be automatically detected. The existing V4L2 OF support tries to figure out the bus type and parse the bus parameters based on that. This does not scale too well as there are multiple serial busses that share common properties. Some hardware also supports multiple types of busses on the same interfaces. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Sebastian Reichel <sre@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Diffstat (limited to 'Documentation/devicetree/bindings/media/video-interfaces.txt')
1 files changed, 5 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt
index 9cd2a369125d..9aa2722b6920 100644
--- a/Documentation/devicetree/bindings/media/video-interfaces.txt
+++ b/Documentation/devicetree/bindings/media/video-interfaces.txt
@@ -76,6 +76,11 @@ Optional endpoint properties
mode horizontal and vertical synchronization signals are provided to the
slave device (data source) by the master device (data sink). In the master
mode the data source device is also the source of the synchronization signals.
+- bus-type: data bus type. Possible values are:
+ 0 - autodetect based on other properties (MIPI CSI-2 D-PHY, parallel or Bt656)
+ 1 - MIPI CSI-2 C-PHY
+ 2 - MIPI CSI1
+ 3 - CCP2
- bus-width: number of data lines actively used, valid for the parallel busses.
- data-shift: on the parallel data busses, if bus-width is used to specify the
number of data lines, data-shift can be used to specify which data lines are

Privacy Policy