aboutsummaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
authorSudeep Dutt <sudeep.dutt@intel.com>2020-10-27 20:14:15 -0700
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2020-10-28 19:12:03 +0100
commit80ade22c06ca115b81dd168e99479c8e09843513 (patch)
treec9062baa446a55412b2dd7582778da381de1d302 /include
parent3650b228f83adda7e5ee532e2b90429c03f7b9ec (diff)
misc: mic: remove the MIC drivers
This patch removes the MIC drivers from the kernel tree since the corresponding devices have been discontinued. Removing the dma and char-misc changes in one patch and merging via the char-misc tree is best to avoid any potential build breakage. Cc: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Acked-By: Vinod Koul <vkoul@kernel.org> Reviewed-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/8c1443136563de34699d2c084df478181c205db4.1603854416.git.sudeep.dutt@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'include')
-rw-r--r--include/linux/mic_bus.h100
-rw-r--r--include/linux/scif.h1339
-rw-r--r--include/uapi/linux/mic_common.h235
-rw-r--r--include/uapi/linux/mic_ioctl.h77
4 files changed, 0 insertions, 1751 deletions
diff --git a/include/linux/mic_bus.h b/include/linux/mic_bus.h
deleted file mode 100644
index e99c789424e0..000000000000
--- a/include/linux/mic_bus.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Intel MIC Platform Software Stack (MPSS)
- *
- * Copyright(c) 2014 Intel Corporation.
- *
- * Intel MIC Bus driver.
- *
- * This implementation is very similar to the virtio bus driver
- * implementation @ include/linux/virtio.h.
- */
-#ifndef _MIC_BUS_H_
-#define _MIC_BUS_H_
-/*
- * Everything a mbus driver needs to work with any particular mbus
- * implementation.
- */
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-
-struct mbus_device_id {
- __u32 device;
- __u32 vendor;
-};
-
-#define MBUS_DEV_DMA_HOST 2
-#define MBUS_DEV_DMA_MIC 3
-#define MBUS_DEV_ANY_ID 0xffffffff
-
-/**
- * mbus_device - representation of a device using mbus
- * @mmio_va: virtual address of mmio space
- * @hw_ops: the hardware ops supported by this device.
- * @id: the device type identification (used to match it with a driver).
- * @dev: underlying device.
- * be used to communicate with.
- * @index: unique position on the mbus bus
- */
-struct mbus_device {
- void __iomem *mmio_va;
- struct mbus_hw_ops *hw_ops;
- struct mbus_device_id id;
- struct device dev;
- int index;
-};
-
-/**
- * mbus_driver - operations for a mbus I/O driver
- * @driver: underlying device driver (populate name and owner).
- * @id_table: the ids serviced by this driver.
- * @probe: the function to call when a device is found. Returns 0 or -errno.
- * @remove: the function to call when a device is removed.
- */
-struct mbus_driver {
- struct device_driver driver;
- const struct mbus_device_id *id_table;
- int (*probe)(struct mbus_device *dev);
- void (*scan)(struct mbus_device *dev);
- void (*remove)(struct mbus_device *dev);
-};
-
-/**
- * struct mic_irq - opaque pointer used as cookie
- */
-struct mic_irq;
-
-/**
- * mbus_hw_ops - Hardware operations for accessing a MIC device on the MIC bus.
- */
-struct mbus_hw_ops {
- struct mic_irq* (*request_threaded_irq)(struct mbus_device *mbdev,
- irq_handler_t handler,
- irq_handler_t thread_fn,
- const char *name, void *data,
- int intr_src);
- void (*free_irq)(struct mbus_device *mbdev,
- struct mic_irq *cookie, void *data);
- void (*ack_interrupt)(struct mbus_device *mbdev, int num);
-};
-
-struct mbus_device *
-mbus_register_device(struct device *pdev, int id, const struct dma_map_ops *dma_ops,
- struct mbus_hw_ops *hw_ops, int index,
- void __iomem *mmio_va);
-void mbus_unregister_device(struct mbus_device *mbdev);
-
-int mbus_register_driver(struct mbus_driver *drv);
-void mbus_unregister_driver(struct mbus_driver *drv);
-
-static inline struct mbus_device *dev_to_mbus(struct device *_dev)
-{
- return container_of(_dev, struct mbus_device, dev);
-}
-
-static inline struct mbus_driver *drv_to_mbus(struct device_driver *drv)
-{
- return container_of(drv, struct mbus_driver, driver);
-}
-
-#endif /* _MIC_BUS_H */
diff --git a/include/linux/scif.h b/include/linux/scif.h
deleted file mode 100644
index 329e695b8fe5..000000000000
--- a/include/linux/scif.h
+++ /dev/null
@@ -1,1339 +0,0 @@
-/*
- * Intel MIC Platform Software Stack (MPSS)
- *
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2014 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * BSD LICENSE
- *
- * Copyright(c) 2014 Intel Corporation.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * Intel SCIF driver.
- *
- */
-#ifndef __SCIF_H__
-#define __SCIF_H__
-
-#include <linux/types.h>
-#include <linux/poll.h>
-#include <linux/device.h>
-#include <linux/scif_ioctl.h>
-
-#define SCIF_ACCEPT_SYNC 1
-#define SCIF_SEND_BLOCK 1
-#define SCIF_RECV_BLOCK 1
-
-enum {
- SCIF_PROT_READ = (1 << 0),
- SCIF_PROT_WRITE = (1 << 1)
-};
-
-enum {
- SCIF_MAP_FIXED = 0x10,
- SCIF_MAP_KERNEL = 0x20,
-};
-
-enum {
- SCIF_FENCE_INIT_SELF = (1 << 0),
- SCIF_FENCE_INIT_PEER = (1 << 1),
- SCIF_SIGNAL_LOCAL = (1 << 4),
- SCIF_SIGNAL_REMOTE = (1 << 5)
-};
-
-enum {
- SCIF_RMA_USECPU = (1 << 0),
- SCIF_RMA_USECACHE = (1 << 1),
- SCIF_RMA_SYNC = (1 << 2),
- SCIF_RMA_ORDERED = (1 << 3)
-};
-
-/* End of SCIF Admin Reserved Ports */
-#define SCIF_ADMIN_PORT_END 1024
-
-/* End of SCIF Reserved Ports */
-#define SCIF_PORT_RSVD 1088
-
-typedef struct scif_endpt *scif_epd_t;
-typedef struct scif_pinned_pages *scif_pinned_pages_t;
-
-/**
- * struct scif_range - SCIF registered range used in kernel mode
- * @cookie: cookie used internally by SCIF
- * @nr_pages: number of pages of PAGE_SIZE
- * @prot_flags: R/W protection
- * @phys_addr: Array of bus addresses
- * @va: Array of kernel virtual addresses backed by the pages in the phys_addr
- * array. The va is populated only when called on the host for a remote
- * SCIF connection on MIC. This is required to support the use case of DMA
- * between MIC and another device which is not a SCIF node e.g., an IB or
- * ethernet NIC.
- */
-struct scif_range {
- void *cookie;
- int nr_pages;
- int prot_flags;
- dma_addr_t *phys_addr;
- void __iomem **va;
-};
-
-/**
- * struct scif_pollepd - SCIF endpoint to be monitored via scif_poll
- * @epd: SCIF endpoint
- * @events: requested events
- * @revents: returned events
- */
-struct scif_pollepd {
- scif_epd_t epd;
- __poll_t events;
- __poll_t revents;
-};
-
-/**
- * scif_peer_dev - representation of a peer SCIF device
- *
- * Peer devices show up as PCIe devices for the mgmt node but not the cards.
- * The mgmt node discovers all the cards on the PCIe bus and informs the other
- * cards about their peers. Upon notification of a peer a node adds a peer
- * device to the peer bus to maintain symmetry in the way devices are
- * discovered across all nodes in the SCIF network.
- *
- * @dev: underlying device
- * @dnode - The destination node which this device will communicate with.
- */
-struct scif_peer_dev {
- struct device dev;
- u8 dnode;
-};
-
-/**
- * scif_client - representation of a SCIF client
- * @name: client name
- * @probe - client method called when a peer device is registered
- * @remove - client method called when a peer device is unregistered
- * @si - subsys_interface used internally for implementing SCIF clients
- */
-struct scif_client {
- const char *name;
- void (*probe)(struct scif_peer_dev *spdev);
- void (*remove)(struct scif_peer_dev *spdev);
- struct subsys_interface si;
-};
-
-#define SCIF_OPEN_FAILED ((scif_epd_t)-1)
-#define SCIF_REGISTER_FAILED ((off_t)-1)
-#define SCIF_MMAP_FAILED ((void *)-1)
-
-/**
- * scif_open() - Create an endpoint
- *
- * Return:
- * Upon successful completion, scif_open() returns an endpoint descriptor to
- * be used in subsequent SCIF functions calls to refer to that endpoint;
- * otherwise in user mode SCIF_OPEN_FAILED (that is ((scif_epd_t)-1)) is
- * returned and errno is set to indicate the error; in kernel mode a NULL
- * scif_epd_t is returned.
- *
- * Errors:
- * ENOMEM - Insufficient kernel memory was available
- */
-scif_epd_t scif_open(void);
-
-/**
- * scif_bind() - Bind an endpoint to a port
- * @epd: endpoint descriptor
- * @pn: port number
- *
- * scif_bind() binds endpoint epd to port pn, where pn is a port number on the
- * local node. If pn is zero, a port number greater than or equal to
- * SCIF_PORT_RSVD is assigned and returned. Each endpoint may be bound to
- * exactly one local port. Ports less than 1024 when requested can only be bound
- * by system (or root) processes or by processes executed by privileged users.
- *
- * Return:
- * Upon successful completion, scif_bind() returns the port number to which epd
- * is bound; otherwise in user mode -1 is returned and errno is set to
- * indicate the error; in kernel mode the negative of one of the following
- * errors is returned.
- *
- * Errors:
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * EINVAL - the endpoint or the port is already bound
- * EISCONN - The endpoint is already connected
- * ENOSPC - No port number available for assignment
- * EACCES - The port requested is protected and the user is not the superuser
- */
-int scif_bind(scif_epd_t epd, u16 pn);
-
-/**
- * scif_listen() - Listen for connections on an endpoint
- * @epd: endpoint descriptor
- * @backlog: maximum pending connection requests
- *
- * scif_listen() marks the endpoint epd as a listening endpoint - that is, as
- * an endpoint that will be used to accept incoming connection requests. Once
- * so marked, the endpoint is said to be in the listening state and may not be
- * used as the endpoint of a connection.
- *
- * The endpoint, epd, must have been bound to a port.
- *
- * The backlog argument defines the maximum length to which the queue of
- * pending connections for epd may grow. If a connection request arrives when
- * the queue is full, the client may receive an error with an indication that
- * the connection was refused.
- *
- * Return:
- * Upon successful completion, scif_listen() returns 0; otherwise in user mode
- * -1 is returned and errno is set to indicate the error; in kernel mode the
- * negative of one of the following errors is returned.
- *
- * Errors:
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * EINVAL - the endpoint is not bound to a port
- * EISCONN - The endpoint is already connected or listening
- */
-int scif_listen(scif_epd_t epd, int backlog);
-
-/**
- * scif_connect() - Initiate a connection on a port
- * @epd: endpoint descriptor
- * @dst: global id of port to which to connect
- *
- * The scif_connect() function requests the connection of endpoint epd to remote
- * port dst. If the connection is successful, a peer endpoint, bound to dst, is
- * created on node dst.node. On successful return, the connection is complete.
- *
- * If the endpoint epd has not already been bound to a port, scif_connect()
- * will bind it to an unused local port.
- *
- * A connection is terminated when an endpoint of the connection is closed,
- * either explicitly by scif_close(), or when a process that owns one of the
- * endpoints of the connection is terminated.
- *
- * In user space, scif_connect() supports an asynchronous connection mode
- * if the application has set the O_NONBLOCK flag on the endpoint via the
- * fcntl() system call. Setting this flag will result in the calling process
- * not to wait during scif_connect().
- *
- * Return:
- * Upon successful completion, scif_connect() returns the port ID to which the
- * endpoint, epd, is bound; otherwise in user mode -1 is returned and errno is
- * set to indicate the error; in kernel mode the negative of one of the
- * following errors is returned.
- *
- * Errors:
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * ECONNREFUSED - The destination was not listening for connections or refused
- * the connection request
- * EINVAL - dst.port is not a valid port ID
- * EISCONN - The endpoint is already connected
- * ENOMEM - No buffer space is available
- * ENODEV - The destination node does not exist, or the node is lost or existed,
- * but is not currently in the network since it may have crashed
- * ENOSPC - No port number available for assignment
- * EOPNOTSUPP - The endpoint is listening and cannot be connected
- */
-int scif_connect(scif_epd_t epd, struct scif_port_id *dst);
-
-/**
- * scif_accept() - Accept a connection on an endpoint
- * @epd: endpoint descriptor
- * @peer: global id of port to which connected
- * @newepd: new connected endpoint descriptor
- * @flags: flags
- *
- * The scif_accept() call extracts the first connection request from the queue
- * of pending connections for the port on which epd is listening. scif_accept()
- * creates a new endpoint, bound to the same port as epd, and allocates a new
- * SCIF endpoint descriptor, returned in newepd, for the endpoint. The new
- * endpoint is connected to the endpoint through which the connection was
- * requested. epd is unaffected by this call, and remains in the listening
- * state.
- *
- * On successful return, peer holds the global port identifier (node id and
- * local port number) of the port which requested the connection.
- *
- * A connection is terminated when an endpoint of the connection is closed,
- * either explicitly by scif_close(), or when a process that owns one of the
- * endpoints of the connection is terminated.
- *
- * The number of connections that can (subsequently) be accepted on epd is only
- * limited by system resources (memory).
- *
- * The flags argument is formed by OR'ing together zero or more of the
- * following values.
- * SCIF_ACCEPT_SYNC - block until a connection request is presented. If
- * SCIF_ACCEPT_SYNC is not in flags, and no pending
- * connections are present on the queue, scif_accept()
- * fails with an EAGAIN error
- *
- * In user mode, the select() and poll() functions can be used to determine
- * when there is a connection request. In kernel mode, the scif_poll()
- * function may be used for this purpose. A readable event will be delivered
- * when a connection is requested.
- *
- * Return:
- * Upon successful completion, scif_accept() returns 0; otherwise in user mode
- * -1 is returned and errno is set to indicate the error; in kernel mode the
- * negative of one of the following errors is returned.
- *
- * Errors:
- * EAGAIN - SCIF_ACCEPT_SYNC is not set and no connections are present to be
- * accepted or SCIF_ACCEPT_SYNC is not set and remote node failed to complete
- * its connection request
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * EINTR - Interrupted function
- * EINVAL - epd is not a listening endpoint, or flags is invalid, or peer is
- * NULL, or newepd is NULL
- * ENODEV - The requesting node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOMEM - Not enough space
- * ENOENT - Secondary part of epd registration failed
- */
-int scif_accept(scif_epd_t epd, struct scif_port_id *peer, scif_epd_t
- *newepd, int flags);
-
-/**
- * scif_close() - Close an endpoint
- * @epd: endpoint descriptor
- *
- * scif_close() closes an endpoint and performs necessary teardown of
- * facilities associated with that endpoint.
- *
- * If epd is a listening endpoint then it will no longer accept connection
- * requests on the port to which it is bound. Any pending connection requests
- * are rejected.
- *
- * If epd is a connected endpoint, then its peer endpoint is also closed. RMAs
- * which are in-process through epd or its peer endpoint will complete before
- * scif_close() returns. Registered windows of the local and peer endpoints are
- * released as if scif_unregister() was called against each window.
- *
- * Closing a SCIF endpoint does not affect local registered memory mapped by
- * a SCIF endpoint on a remote node. The local memory remains mapped by the peer
- * SCIF endpoint explicitly removed by calling munmap(..) by the peer.
- *
- * If the peer endpoint's receive queue is not empty at the time that epd is
- * closed, then the peer endpoint can be passed as the endpoint parameter to
- * scif_recv() until the receive queue is empty.
- *
- * epd is freed and may no longer be accessed.
- *
- * Return:
- * Upon successful completion, scif_close() returns 0; otherwise in user mode
- * -1 is returned and errno is set to indicate the error; in kernel mode the
- * negative of one of the following errors is returned.
- *
- * Errors:
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- */
-int scif_close(scif_epd_t epd);
-
-/**
- * scif_send() - Send a message
- * @epd: endpoint descriptor
- * @msg: message buffer address
- * @len: message length
- * @flags: blocking mode flags
- *
- * scif_send() sends data to the peer of endpoint epd. Up to len bytes of data
- * are copied from memory starting at address msg. On successful execution the
- * return value of scif_send() is the number of bytes that were sent, and is
- * zero if no bytes were sent because len was zero. scif_send() may be called
- * only when the endpoint is in a connected state.
- *
- * If a scif_send() call is non-blocking, then it sends only those bytes which
- * can be sent without waiting, up to a maximum of len bytes.
- *
- * If a scif_send() call is blocking, then it normally returns after sending
- * all len bytes. If a blocking call is interrupted or the connection is
- * reset, the call is considered successful if some bytes were sent or len is
- * zero, otherwise the call is considered unsuccessful.
- *
- * In user mode, the select() and poll() functions can be used to determine
- * when the send queue is not full. In kernel mode, the scif_poll() function
- * may be used for this purpose.
- *
- * It is recommended that scif_send()/scif_recv() only be used for short
- * control-type message communication between SCIF endpoints. The SCIF RMA
- * APIs are expected to provide better performance for transfer sizes of
- * 1024 bytes or longer for the current MIC hardware and software
- * implementation.
- *
- * scif_send() will block until the entire message is sent if SCIF_SEND_BLOCK
- * is passed as the flags argument.
- *
- * Return:
- * Upon successful completion, scif_send() returns the number of bytes sent;
- * otherwise in user mode -1 is returned and errno is set to indicate the
- * error; in kernel mode the negative of one of the following errors is
- * returned.
- *
- * Errors:
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * ECONNRESET - Connection reset by peer
- * EINVAL - flags is invalid, or len is negative
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOMEM - Not enough space
- * ENOTCONN - The endpoint is not connected
- */
-int scif_send(scif_epd_t epd, void *msg, int len, int flags);
-
-/**
- * scif_recv() - Receive a message
- * @epd: endpoint descriptor
- * @msg: message buffer address
- * @len: message buffer length
- * @flags: blocking mode flags
- *
- * scif_recv() receives data from the peer of endpoint epd. Up to len bytes of
- * data are copied to memory starting at address msg. On successful execution
- * the return value of scif_recv() is the number of bytes that were received,
- * and is zero if no bytes were received because len was zero. scif_recv() may
- * be called only when the endpoint is in a connected state.
- *
- * If a scif_recv() call is non-blocking, then it receives only those bytes
- * which can be received without waiting, up to a maximum of len bytes.
- *
- * If a scif_recv() call is blocking, then it normally returns after receiving
- * all len bytes. If the blocking call was interrupted due to a disconnection,
- * subsequent calls to scif_recv() will copy all bytes received upto the point
- * of disconnection.
- *
- * In user mode, the select() and poll() functions can be used to determine
- * when data is available to be received. In kernel mode, the scif_poll()
- * function may be used for this purpose.
- *
- * It is recommended that scif_send()/scif_recv() only be used for short
- * control-type message communication between SCIF endpoints. The SCIF RMA
- * APIs are expected to provide better performance for transfer sizes of
- * 1024 bytes or longer for the current MIC hardware and software
- * implementation.
- *
- * scif_recv() will block until the entire message is received if
- * SCIF_RECV_BLOCK is passed as the flags argument.
- *
- * Return:
- * Upon successful completion, scif_recv() returns the number of bytes
- * received; otherwise in user mode -1 is returned and errno is set to
- * indicate the error; in kernel mode the negative of one of the following
- * errors is returned.
- *
- * Errors:
- * EAGAIN - The destination node is returning from a low power state
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * ECONNRESET - Connection reset by peer
- * EINVAL - flags is invalid, or len is negative
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOMEM - Not enough space
- * ENOTCONN - The endpoint is not connected
- */
-int scif_recv(scif_epd_t epd, void *msg, int len, int flags);
-
-/**
- * scif_register() - Mark a memory region for remote access.
- * @epd: endpoint descriptor
- * @addr: starting virtual address
- * @len: length of range
- * @offset: offset of window
- * @prot_flags: read/write protection flags
- * @map_flags: mapping flags
- *
- * The scif_register() function opens a window, a range of whole pages of the
- * registered address space of the endpoint epd, starting at offset po and
- * continuing for len bytes. The value of po, further described below, is a
- * function of the parameters offset and len, and the value of map_flags. Each
- * page of the window represents the physical memory page which backs the
- * corresponding page of the range of virtual address pages starting at addr
- * and continuing for len bytes. addr and len are constrained to be multiples
- * of the page size. A successful scif_register() call returns po.
- *
- * When SCIF_MAP_FIXED is set in the map_flags argument, po will be offset
- * exactly, and offset is constrained to be a multiple of the page size. The
- * mapping established by scif_register() will not replace any existing
- * registration; an error is returned if any page within the range [offset,
- * offset + len - 1] intersects an existing window.
- *
- * When SCIF_MAP_FIXED is not set, the implementation uses offset in an
- * implementation-defined manner to arrive at po. The po value so chosen will
- * be an area of the registered address space that the implementation deems
- * suitable for a mapping of len bytes. An offset value of 0 is interpreted as
- * granting the implementation complete freedom in selecting po, subject to
- * constraints described below. A non-zero value of offset is taken to be a
- * suggestion of an offset near which the mapping should be placed. When the
- * implementation selects a value for po, it does not replace any extant
- * window. In all cases, po will be a multiple of the page size.
- *
- * The physical pages which are so represented by a window are available for
- * access in calls to mmap(), scif_readfrom(), scif_writeto(),
- * scif_vreadfrom(), and scif_vwriteto(). While a window is registered, the
- * physical pages represented by the window will not be reused by the memory
- * subsystem for any other purpose. Note that the same physical page may be
- * represented by multiple windows.
- *
- * Subsequent operations which change the memory pages to which virtual
- * addresses are mapped (such as mmap(), munmap()) have no effect on
- * existing window.
- *
- * If the process will fork(), it is recommended that the registered
- * virtual address range be marked with MADV_DONTFORK. Doing so will prevent
- * problems due to copy-on-write semantics.
- *
- * The prot_flags argument is formed by OR'ing together one or more of the
- * following values.
- * SCIF_PROT_READ - allow read operations from the window
- * SCIF_PROT_WRITE - allow write operations to the window
- *
- * Return:
- * Upon successful completion, scif_register() returns the offset at which the
- * mapping was placed (po); otherwise in user mode SCIF_REGISTER_FAILED (that
- * is (off_t *)-1) is returned and errno is set to indicate the error; in
- * kernel mode the negative of one of the following errors is returned.
- *
- * Errors:
- * EADDRINUSE - SCIF_MAP_FIXED is set in map_flags, and pages in the range
- * [offset, offset + len -1] are already registered
- * EAGAIN - The mapping could not be performed due to lack of resources
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * ECONNRESET - Connection reset by peer
- * EINVAL - map_flags is invalid, or prot_flags is invalid, or SCIF_MAP_FIXED is
- * set in flags, and offset is not a multiple of the page size, or addr is not a
- * multiple of the page size, or len is not a multiple of the page size, or is
- * 0, or offset is negative
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOMEM - Not enough space
- * ENOTCONN -The endpoint is not connected
- */
-off_t scif_register(scif_epd_t epd, void *addr, size_t len, off_t offset,
- int prot_flags, int map_flags);
-
-/**
- * scif_unregister() - Mark a memory region for remote access.
- * @epd: endpoint descriptor
- * @offset: start of range to unregister
- * @len: length of range to unregister
- *
- * The scif_unregister() function closes those previously registered windows
- * which are entirely within the range [offset, offset + len - 1]. It is an
- * error to specify a range which intersects only a subrange of a window.
- *
- * On a successful return, pages within the window may no longer be specified
- * in calls to mmap(), scif_readfrom(), scif_writeto(), scif_vreadfrom(),
- * scif_vwriteto(), scif_get_pages, and scif_fence_signal(). The window,
- * however, continues to exist until all previous references against it are
- * removed. A window is referenced if there is a mapping to it created by
- * mmap(), or if scif_get_pages() was called against the window
- * (and the pages have not been returned via scif_put_pages()). A window is
- * also referenced while an RMA, in which some range of the window is a source
- * or destination, is in progress. Finally a window is referenced while some
- * offset in that window was specified to scif_fence_signal(), and the RMAs
- * marked by that call to scif_fence_signal() have not completed. While a
- * window is in this state, its registered address space pages are not
- * available for use in a new registered window.
- *
- * When all such references to the window have been removed, its references to
- * all the physical pages which it represents are removed. Similarly, the
- * registered address space pages of the window become available for
- * registration in a new window.
- *
- * Return:
- * Upon successful completion, scif_unregister() returns 0; otherwise in user
- * mode -1 is returned and errno is set to indicate the error; in kernel mode
- * the negative of one of the following errors is returned. In the event of an
- * error, no windows are unregistered.
- *
- * Errors:
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * ECONNRESET - Connection reset by peer
- * EINVAL - the range [offset, offset + len - 1] intersects a subrange of a
- * window, or offset is negative
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOTCONN - The endpoint is not connected
- * ENXIO - Offsets in the range [offset, offset + len - 1] are invalid for the
- * registered address space of epd
- */
-int scif_unregister(scif_epd_t epd, off_t offset, size_t len);
-
-/**
- * scif_readfrom() - Copy from a remote address space
- * @epd: endpoint descriptor
- * @loffset: offset in local registered address space to
- * which to copy
- * @len: length of range to copy
- * @roffset: offset in remote registered address space
- * from which to copy
- * @rma_flags: transfer mode flags
- *
- * scif_readfrom() copies len bytes from the remote registered address space of
- * the peer of endpoint epd, starting at the offset roffset to the local
- * registered address space of epd, starting at the offset loffset.
- *
- * Each of the specified ranges [loffset, loffset + len - 1] and [roffset,
- * roffset + len - 1] must be within some registered window or windows of the
- * local and remote nodes. A range may intersect multiple registered windows,
- * but only if those windows are contiguous in the registered address space.
- *
- * If rma_flags includes SCIF_RMA_USECPU, then the data is copied using
- * programmed read/writes. Otherwise the data is copied using DMA. If rma_-
- * flags includes SCIF_RMA_SYNC, then scif_readfrom() will return after the
- * transfer is complete. Otherwise, the transfer may be performed asynchron-
- * ously. The order in which any two asynchronous RMA operations complete
- * is non-deterministic. The synchronization functions, scif_fence_mark()/
- * scif_fence_wait() and scif_fence_signal(), can be used to synchronize to
- * the completion of asynchronous RMA operations on the same endpoint.
- *
- * The DMA transfer of individual bytes is not guaranteed to complete in
- * address order. If rma_flags includes SCIF_RMA_ORDERED, then the last
- * cacheline or partial cacheline of the source range will become visible on
- * the destination node after all other transferred data in the source
- * range has become visible on the destination node.
- *
- * The optimal DMA performance will likely be realized if both
- * loffset and roffset are cacheline aligned (are a multiple of 64). Lower
- * performance will likely be realized if loffset and roffset are not
- * cacheline aligned but are separated by some multiple of 64. The lowest level
- * of performance is likely if loffset and roffset are not separated by a
- * multiple of 64.
- *
- * The rma_flags argument is formed by ORing together zero or more of the
- * following values.
- * SCIF_RMA_USECPU - perform the transfer using the CPU, otherwise use the DMA
- * engine.
- * SCIF_RMA_SYNC - perform the transfer synchronously, returning after the
- * transfer has completed. Passing this flag results in the
- * current implementation busy waiting and consuming CPU cycles
- * while the DMA transfer is in progress for best performance by
- * avoiding the interrupt latency.
- * SCIF_RMA_ORDERED - ensure that the last cacheline or partial cacheline of
- * the source range becomes visible on the destination node
- * after all other transferred data in the source range has
- * become visible on the destination
- *
- * Return:
- * Upon successful completion, scif_readfrom() returns 0; otherwise in user
- * mode -1 is returned and errno is set to indicate the error; in kernel mode
- * the negative of one of the following errors is returned.
- *
- * Errors:
- * EACCES - Attempt to write to a read-only range
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * ECONNRESET - Connection reset by peer
- * EINVAL - rma_flags is invalid
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOTCONN - The endpoint is not connected
- * ENXIO - The range [loffset, loffset + len - 1] is invalid for the registered
- * address space of epd, or, The range [roffset, roffset + len - 1] is invalid
- * for the registered address space of the peer of epd, or loffset or roffset
- * is negative
- */
-int scif_readfrom(scif_epd_t epd, off_t loffset, size_t len, off_t
- roffset, int rma_flags);
-
-/**
- * scif_writeto() - Copy to a remote address space
- * @epd: endpoint descriptor
- * @loffset: offset in local registered address space
- * from which to copy
- * @len: length of range to copy
- * @roffset: offset in remote registered address space to
- * which to copy
- * @rma_flags: transfer mode flags
- *
- * scif_writeto() copies len bytes from the local registered address space of
- * epd, starting at the offset loffset to the remote registered address space
- * of the peer of endpoint epd, starting at the offset roffset.
- *
- * Each of the specified ranges [loffset, loffset + len - 1] and [roffset,
- * roffset + len - 1] must be within some registered window or windows of the
- * local and remote nodes. A range may intersect multiple registered windows,
- * but only if those windows are contiguous in the registered address space.
- *
- * If rma_flags includes SCIF_RMA_USECPU, then the data is copied using
- * programmed read/writes. Otherwise the data is copied using DMA. If rma_-
- * flags includes SCIF_RMA_SYNC, then scif_writeto() will return after the
- * transfer is complete. Otherwise, the transfer may be performed asynchron-
- * ously. The order in which any two asynchronous RMA operations complete
- * is non-deterministic. The synchronization functions, scif_fence_mark()/
- * scif_fence_wait() and scif_fence_signal(), can be used to synchronize to
- * the completion of asynchronous RMA operations on the same endpoint.
- *
- * The DMA transfer of individual bytes is not guaranteed to complete in
- * address order. If rma_flags includes SCIF_RMA_ORDERED, then the last
- * cacheline or partial cacheline of the source range will become visible on
- * the destination node after all other transferred data in the source
- * range has become visible on the destination node.
- *
- * The optimal DMA performance will likely be realized if both
- * loffset and roffset are cacheline aligned (are a multiple of 64). Lower
- * performance will likely be realized if loffset and roffset are not cacheline
- * aligned but are separated by some multiple of 64. The lowest level of
- * performance is likely if loffset and roffset are not separated by a multiple
- * of 64.
- *
- * The rma_flags argument is formed by ORing together zero or more of the
- * following values.
- * SCIF_RMA_USECPU - perform the transfer using the CPU, otherwise use the DMA
- * engine.
- * SCIF_RMA_SYNC - perform the transfer synchronously, returning after the
- * transfer has completed. Passing this flag results in the
- * current implementation busy waiting and consuming CPU cycles
- * while the DMA transfer is in progress for best performance by
- * avoiding the interrupt latency.
- * SCIF_RMA_ORDERED - ensure that the last cacheline or partial cacheline of
- * the source range becomes visible on the destination node
- * after all other transferred data in the source range has
- * become visible on the destination
- *
- * Return:
- * Upon successful completion, scif_readfrom() returns 0; otherwise in user
- * mode -1 is returned and errno is set to indicate the error; in kernel mode
- * the negative of one of the following errors is returned.
- *
- * Errors:
- * EACCES - Attempt to write to a read-only range
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * ECONNRESET - Connection reset by peer
- * EINVAL - rma_flags is invalid
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOTCONN - The endpoint is not connected
- * ENXIO - The range [loffset, loffset + len - 1] is invalid for the registered
- * address space of epd, or, The range [roffset , roffset + len -1] is invalid
- * for the registered address space of the peer of epd, or loffset or roffset
- * is negative
- */
-int scif_writeto(scif_epd_t epd, off_t loffset, size_t len, off_t
- roffset, int rma_flags);
-
-/**
- * scif_vreadfrom() - Copy from a remote address space
- * @epd: endpoint descriptor
- * @addr: address to which to copy
- * @len: length of range to copy
- * @roffset: offset in remote registered address space
- * from which to copy
- * @rma_flags: transfer mode flags
- *
- * scif_vreadfrom() copies len bytes from the remote registered address
- * space of the peer of endpoint epd, starting at the offset roffset, to local
- * memory, starting at addr.
- *
- * The specified range [roffset, roffset + len - 1] must be within some
- * registered window or windows of the remote nodes. The range may
- * intersect multiple registered windows, but only if those windows are
- * contiguous in the registered address space.
- *
- * If rma_flags includes SCIF_RMA_USECPU, then the data is copied using
- * programmed read/writes. Otherwise the data is copied using DMA. If rma_-
- * flags includes SCIF_RMA_SYNC, then scif_vreadfrom() will return after the
- * transfer is complete. Otherwise, the transfer may be performed asynchron-
- * ously. The order in which any two asynchronous RMA operations complete
- * is non-deterministic. The synchronization functions, scif_fence_mark()/
- * scif_fence_wait() and scif_fence_signal(), can be used to synchronize to
- * the completion of asynchronous RMA operations on the same endpoint.
- *
- * The DMA transfer of individual bytes is not guaranteed to complete in
- * address order. If rma_flags includes SCIF_RMA_ORDERED, then the last
- * cacheline or partial cacheline of the source range will become visible on
- * the destination node after all other transferred data in the source
- * range has become visible on the destination node.
- *
- * If rma_flags includes SCIF_RMA_USECACHE, then the physical pages which back
- * the specified local memory range may be remain in a pinned state even after
- * the specified transfer completes. This may reduce overhead if some or all of
- * the same virtual address range is referenced in a subsequent call of
- * scif_vreadfrom() or scif_vwriteto().
- *
- * The optimal DMA performance will likely be realized if both
- * addr and roffset are cacheline aligned (are a multiple of 64). Lower
- * performance will likely be realized if addr and roffset are not
- * cacheline aligned but are separated by some multiple of 64. The lowest level
- * of performance is likely if addr and roffset are not separated by a
- * multiple of 64.
- *
- * The rma_flags argument is formed by ORing together zero or more of the
- * following values.
- * SCIF_RMA_USECPU - perform the transfer using the CPU, otherwise use the DMA
- * engine.
- * SCIF_RMA_USECACHE - enable registration caching
- * SCIF_RMA_SYNC - perform the transfer synchronously, returning after the
- * transfer has completed. Passing this flag results in the
- * current implementation busy waiting and consuming CPU cycles
- * while the DMA transfer is in progress for best performance by
- * avoiding the interrupt latency.
- * SCIF_RMA_ORDERED - ensure that the last cacheline or partial cacheline of
- * the source range becomes visible on the destination node
- * after all other transferred data in the source range has
- * become visible on the destination
- *
- * Return:
- * Upon successful completion, scif_vreadfrom() returns 0; otherwise in user
- * mode -1 is returned and errno is set to indicate the error; in kernel mode
- * the negative of one of the following errors is returned.
- *
- * Errors:
- * EACCES - Attempt to write to a read-only range
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * ECONNRESET - Connection reset by peer
- * EINVAL - rma_flags is invalid
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOTCONN - The endpoint is not connected
- * ENXIO - Offsets in the range [roffset, roffset + len - 1] are invalid for the
- * registered address space of epd
- */
-int scif_vreadfrom(scif_epd_t epd, void *addr, size_t len, off_t roffset,
- int rma_flags);
-
-/**
- * scif_vwriteto() - Copy to a remote address space
- * @epd: endpoint descriptor
- * @addr: address from which to copy
- * @len: length of range to copy
- * @roffset: offset in remote registered address space to
- * which to copy
- * @rma_flags: transfer mode flags
- *
- * scif_vwriteto() copies len bytes from the local memory, starting at addr, to
- * the remote registered address space of the peer of endpoint epd, starting at
- * the offset roffset.
- *
- * The specified range [roffset, roffset + len - 1] must be within some
- * registered window or windows of the remote nodes. The range may intersect
- * multiple registered windows, but only if those windows are contiguous in the
- * registered address space.
- *
- * If rma_flags includes SCIF_RMA_USECPU, then the data is copied using
- * programmed read/writes. Otherwise the data is copied using DMA. If rma_-
- * flags includes SCIF_RMA_SYNC, then scif_vwriteto() will return after the
- * transfer is complete. Otherwise, the transfer may be performed asynchron-
- * ously. The order in which any two asynchronous RMA operations complete
- * is non-deterministic. The synchronization functions, scif_fence_mark()/
- * scif_fence_wait() and scif_fence_signal(), can be used to synchronize to
- * the completion of asynchronous RMA operations on the same endpoint.
- *
- * The DMA transfer of individual bytes is not guaranteed to complete in
- * address order. If rma_flags includes SCIF_RMA_ORDERED, then the last
- * cacheline or partial cacheline of the source range will become visible on
- * the destination node after all other transferred data in the source
- * range has become visible on the destination node.
- *
- * If rma_flags includes SCIF_RMA_USECACHE, then the physical pages which back
- * the specified local memory range may be remain in a pinned state even after
- * the specified transfer completes. This may reduce overhead if some or all of
- * the same virtual address range is referenced in a subsequent call of
- * scif_vreadfrom() or scif_vwriteto().
- *
- * The optimal DMA performance will likely be realized if both
- * addr and offset are cacheline aligned (are a multiple of 64). Lower
- * performance will likely be realized if addr and offset are not cacheline
- * aligned but are separated by some multiple of 64. The lowest level of
- * performance is likely if addr and offset are not separated by a multiple of
- * 64.
- *
- * The rma_flags argument is formed by ORing together zero or more of the
- * following values.
- * SCIF_RMA_USECPU - perform the transfer using the CPU, otherwise use the DMA
- * engine.
- * SCIF_RMA_USECACHE - allow registration caching
- * SCIF_RMA_SYNC - perform the transfer synchronously, returning after the
- * transfer has completed. Passing this flag results in the
- * current implementation busy waiting and consuming CPU cycles
- * while the DMA transfer is in progress for best performance by
- * avoiding the interrupt latency.
- * SCIF_RMA_ORDERED - ensure that the last cacheline or partial cacheline of
- * the source range becomes visible on the destination node
- * after all other transferred data in the source range has
- * become visible on the destination
- *
- * Return:
- * Upon successful completion, scif_vwriteto() returns 0; otherwise in user
- * mode -1 is returned and errno is set to indicate the error; in kernel mode
- * the negative of one of the following errors is returned.
- *
- * Errors:
- * EACCES - Attempt to write to a read-only range
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * ECONNRESET - Connection reset by peer
- * EINVAL - rma_flags is invalid
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOTCONN - The endpoint is not connected
- * ENXIO - Offsets in the range [roffset, roffset + len - 1] are invalid for the
- * registered address space of epd
- */
-int scif_vwriteto(scif_epd_t epd, void *addr, size_t len, off_t roffset,
- int rma_flags);
-
-/**
- * scif_fence_mark() - Mark previously issued RMAs
- * @epd: endpoint descriptor
- * @flags: control flags
- * @mark: marked value returned as output.
- *
- * scif_fence_mark() returns after marking the current set of all uncompleted
- * RMAs initiated through the endpoint epd or the current set of all
- * uncompleted RMAs initiated through the peer of endpoint epd. The RMAs are
- * marked with a value returned at mark. The application may subsequently call
- * scif_fence_wait(), passing the value returned at mark, to await completion
- * of all RMAs so marked.
- *
- * The flags argument has exactly one of the following values.
- * SCIF_FENCE_INIT_SELF - RMA operations initiated through endpoint
- * epd are marked
- * SCIF_FENCE_INIT_PEER - RMA operations initiated through the peer
- * of endpoint epd are marked
- *
- * Return:
- * Upon successful completion, scif_fence_mark() returns 0; otherwise in user
- * mode -1 is returned and errno is set to indicate the error; in kernel mode
- * the negative of one of the following errors is returned.
- *
- * Errors:
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * ECONNRESET - Connection reset by peer
- * EINVAL - flags is invalid
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOTCONN - The endpoint is not connected
- * ENOMEM - Insufficient kernel memory was available
- */
-int scif_fence_mark(scif_epd_t epd, int flags, int *mark);
-
-/**
- * scif_fence_wait() - Wait for completion of marked RMAs
- * @epd: endpoint descriptor
- * @mark: mark request
- *
- * scif_fence_wait() returns after all RMAs marked with mark have completed.
- * The value passed in mark must have been obtained in a previous call to
- * scif_fence_mark().
- *
- * Return:
- * Upon successful completion, scif_fence_wait() returns 0; otherwise in user
- * mode -1 is returned and errno is set to indicate the error; in kernel mode
- * the negative of one of the following errors is returned.
- *
- * Errors:
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * ECONNRESET - Connection reset by peer
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOTCONN - The endpoint is not connected
- * ENOMEM - Insufficient kernel memory was available
- */
-int scif_fence_wait(scif_epd_t epd, int mark);
-
-/**
- * scif_fence_signal() - Request a memory update on completion of RMAs
- * @epd: endpoint descriptor
- * @loff: local offset
- * @lval: local value to write to loffset
- * @roff: remote offset
- * @rval: remote value to write to roffset
- * @flags: flags
- *
- * scif_fence_signal() returns after marking the current set of all uncompleted
- * RMAs initiated through the endpoint epd or marking the current set of all
- * uncompleted RMAs initiated through the peer of endpoint epd.
- *
- * If flags includes SCIF_SIGNAL_LOCAL, then on completion of the RMAs in the
- * marked set, lval is written to memory at the address corresponding to offset
- * loff in the local registered address space of epd. loff must be within a
- * registered window. If flags includes SCIF_SIGNAL_REMOTE, then on completion
- * of the RMAs in the marked set, rval is written to memory at the address
- * corresponding to offset roff in the remote registered address space of epd.
- * roff must be within a remote registered window of the peer of epd. Note
- * that any specified offset must be DWORD (4 byte / 32 bit) aligned.
- *
- * The flags argument is formed by OR'ing together the following.
- * Exactly one of the following values.
- * SCIF_FENCE_INIT_SELF - RMA operations initiated through endpoint
- * epd are marked
- * SCIF_FENCE_INIT_PEER - RMA operations initiated through the peer
- * of endpoint epd are marked
- * One or more of the following values.
- * SCIF_SIGNAL_LOCAL - On completion of the marked set of RMAs, write lval to
- * memory at the address corresponding to offset loff in the local
- * registered address space of epd.
- * SCIF_SIGNAL_REMOTE - On completion of the marked set of RMAs, write rval to
- * memory at the address corresponding to offset roff in the remote
- * registered address space of epd.
- *
- * Return:
- * Upon successful completion, scif_fence_signal() returns 0; otherwise in
- * user mode -1 is returned and errno is set to indicate the error; in kernel
- * mode the negative of one of the following errors is returned.
- *
- * Errors:
- * EBADF, ENOTTY - epd is not a valid endpoint descriptor
- * ECONNRESET - Connection reset by peer
- * EINVAL - flags is invalid, or loff or roff are not DWORD aligned
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOTCONN - The endpoint is not connected
- * ENXIO - loff is invalid for the registered address of epd, or roff is invalid
- * for the registered address space, of the peer of epd
- */
-int scif_fence_signal(scif_epd_t epd, off_t loff, u64 lval, off_t roff,
- u64 rval, int flags);
-
-/**
- * scif_get_node_ids() - Return information about online nodes
- * @nodes: array in which to return online node IDs
- * @len: number of entries in the nodes array
- * @self: address to place the node ID of the local node
- *
- * scif_get_node_ids() fills in the nodes array with up to len node IDs of the
- * nodes in the SCIF network. If there is not enough space in nodes, as
- * indicated by the len parameter, only len node IDs are returned in nodes. The
- * return value of scif_get_node_ids() is the total number of nodes currently in
- * the SCIF network. By checking the return value against the len parameter,
- * the user may determine if enough space for nodes was allocated.
- *
- * The node ID of the local node is returned at self.
- *
- * Return:
- * Upon successful completion, scif_get_node_ids() returns the actual number of
- * online nodes in the SCIF network including 'self'; otherwise in user mode
- * -1 is returned and errno is set to indicate the error; in kernel mode no
- * errors are returned.
- */
-int scif_get_node_ids(u16 *nodes, int len, u16 *self);
-
-/**
- * scif_pin_pages() - Pin a set of pages
- * @addr: Virtual address of range to pin
- * @len: Length of range to pin
- * @prot_flags: Page protection flags
- * @map_flags: Page classification flags
- * @pinned_pages: Handle to pinned pages
- *
- * scif_pin_pages() pins (locks in physical memory) the physical pages which
- * back the range of virtual address pages starting at addr and continuing for
- * len bytes. addr and len are constrained to be multiples of the page size. A
- * successful scif_pin_pages() call returns a handle to pinned_pages which may
- * be used in subsequent calls to scif_register_pinned_pages().
- *
- * The pages will remain pinned as long as there is a reference against the
- * scif_pinned_pages_t value returned by scif_pin_pages() and until
- * scif_unpin_pages() is called, passing the scif_pinned_pages_t value. A
- * reference is added to a scif_pinned_pages_t value each time a window is
- * created by calling scif_register_pinned_pages() and passing the
- * scif_pinned_pages_t value. A reference is removed from a
- * scif_pinned_pages_t value each time such a window is deleted.
- *
- * Subsequent operations which change the memory pages to which virtual
- * addresses are mapped (such as mmap(), munmap()) have no effect on the
- * scif_pinned_pages_t value or windows created against it.
- *
- * If the process will fork(), it is recommended that the registered
- * virtual address range be marked with MADV_DONTFORK. Doing so will prevent
- * problems due to copy-on-write semantics.
- *
- * The prot_flags argument is formed by OR'ing together one or more of the
- * following values.
- * SCIF_PROT_READ - allow read operations against the pages
- * SCIF_PROT_WRITE - allow write operations against the pages
- * The map_flags argument can be set as SCIF_MAP_KERNEL to interpret addr as a
- * kernel space address. By default, addr is interpreted as a user space
- * address.
- *
- * Return:
- * Upon successful completion, scif_pin_pages() returns 0; otherwise the
- * negative of one of the following errors is returned.
- *
- * Errors:
- * EINVAL - prot_flags is invalid, map_flags is invalid, or offset is negative
- * ENOMEM - Not enough space
- */
-int scif_pin_pages(void *addr, size_t len, int prot_flags, int map_flags,
- scif_pinned_pages_t *pinned_pages);
-
-/**
- * scif_unpin_pages() - Unpin a set of pages
- * @pinned_pages: Handle to pinned pages to be unpinned
- *
- * scif_unpin_pages() prevents scif_register_pinned_pages() from registering new
- * windows against pinned_pages. The physical pages represented by pinned_pages
- * will remain pinned until all windows previously registered against
- * pinned_pages are deleted (the window is scif_unregister()'d and all
- * references to the window are removed (see scif_unregister()).
- *
- * pinned_pages must have been obtain from a previous call to scif_pin_pages().
- * After calling scif_unpin_pages(), it is an error to pass pinned_pages to
- * scif_register_pinned_pages().
- *
- * Return:
- * Upon successful completion, scif_unpin_pages() returns 0; otherwise the
- * negative of one of the following errors is returned.
- *
- * Errors:
- * EINVAL - pinned_pages is not valid
- */
-int scif_unpin_pages(scif_pinned_pages_t pinned_pages);
-
-/**
- * scif_register_pinned_pages() - Mark a memory region for remote access.
- * @epd: endpoint descriptor
- * @pinned_pages: Handle to pinned pages
- * @offset: Registered address space offset
- * @map_flags: Flags which control where pages are mapped
- *
- * The scif_register_pinned_pages() function opens a window, a range of whole
- * pages of the registered address space of the endpoint epd, starting at
- * offset po. The value of po, further described below, is a function of the
- * parameters offset and pinned_pages, and the value of map_flags. Each page of
- * the window represents a corresponding physical memory page of the range
- * represented by pinned_pages; the length of the window is the same as the
- * length of range represented by pinned_pages. A successful
- * scif_register_pinned_pages() call returns po as the return value.
- *
- * When SCIF_MAP_FIXED is set in the map_flags argument, po will be offset
- * exactly, and offset is constrained to be a multiple of the page size. The
- * mapping established by scif_register_pinned_pages() will not replace any
- * existing registration; an error is returned if any page of the new window
- * would intersect an existing window.
- *
- * When SCIF_MAP_FIXED is not set, the implementation uses offset in an
- * implementation-defined manner to arrive at po. The po so chosen will be an
- * area of the registered address space that the implementation deems suitable
- * for a mapping of the required size. An offset value of 0 is interpreted as
- * granting the implementation complete freedom in selecting po, subject to
- * constraints described below. A non-zero value of offset is taken to be a
- * suggestion of an offset near which the mapping should be placed. When the
- * implementation selects a value for po, it does not replace any extant
- * window. In all cases, po will be a multiple of the page size.
- *
- * The physical pages which are so represented by a window are available for
- * access in calls to scif_get_pages(), scif_readfrom(), scif_writeto(),
- * scif_vreadfrom(), and scif_vwriteto(). While a window is registered, the
- * physical pages represented by the window will not be reused by the memory
- * subsystem for any other purpose. Note that the same physical page may be
- * represented by multiple windows.
- *
- * Windows created by scif_register_pinned_pages() are unregistered by
- * scif_unregister().
- *
- * The map_flags argument can be set to SCIF_MAP_FIXED which interprets a
- * fixed offset.
- *
- * Return:
- * Upon successful completion, scif_register_pinned_pages() returns the offset
- * at which the mapping was placed (po); otherwise the negative of one of the
- * following errors is returned.
- *
- * Errors:
- * EADDRINUSE - SCIF_MAP_FIXED is set in map_flags and pages in the new window
- * would intersect an existing window
- * EAGAIN - The mapping could not be performed due to lack of resources
- * ECONNRESET - Connection reset by peer
- * EINVAL - map_flags is invalid, or SCIF_MAP_FIXED is set in map_flags, and
- * offset is not a multiple of the page size, or offset is negative
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOMEM - Not enough space
- * ENOTCONN - The endpoint is not connected
- */
-off_t scif_register_pinned_pages(scif_epd_t epd,
- scif_pinned_pages_t pinned_pages,
- off_t offset, int map_flags);
-
-/**
- * scif_get_pages() - Add references to remote registered pages
- * @epd: endpoint descriptor
- * @offset: remote registered offset
- * @len: length of range of pages
- * @pages: returned scif_range structure
- *
- * scif_get_pages() returns the addresses of the physical pages represented by
- * those pages of the registered address space of the peer of epd, starting at
- * offset and continuing for len bytes. offset and len are constrained to be
- * multiples of the page size.
- *
- * All of the pages in the specified range [offset, offset + len - 1] must be
- * within a single window of the registered address space of the peer of epd.
- *
- * The addresses are returned as a virtually contiguous array pointed to by the
- * phys_addr component of the scif_range structure whose address is returned in
- * pages. The nr_pages component of scif_range is the length of the array. The
- * prot_flags component of scif_range holds the protection flag value passed
- * when the pages were registered.
- *
- * Each physical page whose address is returned by scif_get_pages() remains
- * available and will not be released for reuse until the scif_range structure
- * is returned in a call to scif_put_pages(). The scif_range structure returned
- * by scif_get_pages() must be unmodified.
- *
- * It is an error to call scif_close() on an endpoint on which a scif_range
- * structure of that endpoint has not been returned to scif_put_pages().
- *
- * Return:
- * Upon successful completion, scif_get_pages() returns 0; otherwise the
- * negative of one of the following errors is returned.
- * Errors:
- * ECONNRESET - Connection reset by peer.
- * EINVAL - offset is not a multiple of the page size, or offset is negative, or
- * len is not a multiple of the page size
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOTCONN - The endpoint is not connected
- * ENXIO - Offsets in the range [offset, offset + len - 1] are invalid
- * for the registered address space of the peer epd
- */
-int scif_get_pages(scif_epd_t epd, off_t offset, size_t len,
- struct scif_range **pages);
-
-/**
- * scif_put_pages() - Remove references from remote registered pages
- * @pages: pages to be returned
- *
- * scif_put_pages() releases a scif_range structure previously obtained by
- * calling scif_get_pages(). The physical pages represented by pages may
- * be reused when the window which represented those pages is unregistered.
- * Therefore, those pages must not be accessed after calling scif_put_pages().
- *
- * Return:
- * Upon successful completion, scif_put_pages() returns 0; otherwise the
- * negative of one of the following errors is returned.
- * Errors:
- * EINVAL - pages does not point to a valid scif_range structure, or
- * the scif_range structure pointed to by pages was already returned
- * ENODEV - The remote node is lost or existed, but is not currently in the
- * network since it may have crashed
- * ENOTCONN - The endpoint is not connected
- */
-int scif_put_pages(struct scif_range *pages);
-
-/**
- * scif_poll() - Wait for some event on an endpoint
- * @epds: Array of endpoint descriptors
- * @nepds: Length of epds
- * @timeout: Upper limit on time for which scif_poll() will block
- *
- * scif_poll() waits for one of a set of endpoints to become ready to perform
- * an I/O operation.
- *
- * The epds argument specifies the endpoint descriptors to be examined and the
- * events of interest for each endpoint descriptor. epds is a pointer to an
- * array with one member for each open endpoint descriptor of interest.
- *
- * The number of items in the epds array is specified in nepds. The epd field
- * of scif_pollepd is an endpoint descriptor of an open endpoint. The field
- * events is a bitmask specifying the events which the application is
- * interested in. The field revents is an output parameter, filled by the
- * kernel with the events that actually occurred. The bits returned in revents
- * can include any of those specified in events, or one of the values EPOLLERR,
- * EPOLLHUP, or EPOLLNVAL. (These three bits are meaningless in the events
- * field, and will be set in the revents field whenever the corresponding
- * condition is true.)
- *
- * If none of the events requested (and no error) has occurred for any of the
- * endpoint descriptors, then scif_poll() blocks until one of the events occurs.
- *
- * The timeout argument specifies an upper limit on the time for which
- * scif_poll() will block, in milliseconds. Specifying a negative value in
- * timeout means an infinite timeout.
- *
- * The following bits may be set in events and returned in revents.
- * EPOLLIN - Data may be received without blocking. For a connected
- * endpoint, this means that scif_recv() may be called without blocking. For a
- * listening endpoint, this means that scif_accept() may be called without
- * blocking.
- * EPOLLOUT - Data may be sent without blocking. For a connected endpoint, this
- * means that scif_send() may be called without blocking. EPOLLOUT may also be
- * used to block waiting for a non-blocking connect to complete. This bit value
- * has no meaning for a listening endpoint and is ignored if specified.
- *
- * The following bits are only returned in revents, and are ignored if set in
- * events.
- * EPOLLERR - An error occurred on the endpoint
- * EPOLLHUP - The connection to the peer endpoint was disconnected
- * EPOLLNVAL - The specified endpoint descriptor is invalid.
- *
- * Return:
- * Upon successful completion, scif_poll() returns a non-negative value. A
- * positive value indicates the total number of endpoint descriptors that have
- * been selected (that is, endpoint descriptors for which the revents member is
- * non-zero). A value of 0 indicates that the call timed out and no endpoint
- * descriptors have been selected. Otherwise in user mode -1 is returned and
- * errno is set to indicate the error; in kernel mode the negative of one of
- * the following errors is returned.
- *
- * Errors:
- * EINTR - A signal occurred before any requested event
- * EINVAL - The nepds argument is greater than {OPEN_MAX}
- * ENOMEM - There was no space to allocate file descriptor tables
- */
-int scif_poll(struct scif_pollepd *epds, unsigned int nepds, long timeout);
-
-/**
- * scif_client_register() - Register a SCIF client
- * @client: client to be registered
- *
- * scif_client_register() registers a SCIF client. The probe() method
- * of the client is called when SCIF peer devices come online and the
- * remove() method is called when the peer devices disappear.
- *
- * Return:
- * Upon successful completion, scif_client_register() returns a non-negative
- * value. Otherwise the return value is the same as subsys_interface_register()
- * in the kernel.
- */
-int scif_client_register(struct scif_client *client);
-
-/**
- * scif_client_unregister() - Unregister a SCIF client
- * @client: client to be unregistered
- *
- * scif_client_unregister() unregisters a SCIF client.
- *
- * Return:
- * None
- */
-void scif_client_unregister(struct scif_client *client);
-
-#endif /* __SCIF_H__ */
diff --git a/include/uapi/linux/mic_common.h b/include/uapi/linux/mic_common.h
deleted file mode 100644
index 504e523f702c..000000000000
--- a/include/uapi/linux/mic_common.h
+++ /dev/null
@@ -1,235 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * Intel MIC Platform Software Stack (MPSS)
- *
- * Copyright(c) 2013 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * The full GNU General Public License is included in this distribution in
- * the file called "COPYING".
- *
- * Intel MIC driver.
- *
- */
-#ifndef __MIC_COMMON_H_
-#define __MIC_COMMON_H_
-
-#include <linux/virtio_ring.h>
-
-#define __mic_align(a, x) (((a) + (x) - 1) & ~((x) - 1))
-
-/**
- * struct mic_device_desc: Virtio device information shared between the
- * virtio driver and userspace backend
- *
- * @type: Device type: console/network/disk etc. Type 0/-1 terminates.
- * @num_vq: Number of virtqueues.
- * @feature_len: Number of bytes of feature bits. Multiply by 2: one for
- host features and one for guest acknowledgements.
- * @config_len: Number of bytes of the config array after virtqueues.
- * @status: A status byte, written by the Guest.
- * @config: Start of the following variable length config.
- */
-struct mic_device_desc {
- __s8 type;
- __u8 num_vq;
- __u8 feature_len;
- __u8 config_len;
- __u8 status;
- __le64 config[0];
-} __attribute__ ((aligned(8)));
-
-/**
- * struct mic_device_ctrl: Per virtio device information in the device page
- * used internally by the host and card side drivers.
- *
- * @vdev: Used for storing MIC vdev information by the guest.
- * @config_change: Set to 1 by host when a config change is requested.
- * @vdev_reset: Set to 1 by guest to indicate virtio device has been reset.
- * @guest_ack: Set to 1 by guest to ack a command.
- * @host_ack: Set to 1 by host to ack a command.
- * @used_address_updated: Set to 1 by guest when the used address should be
- * updated.
- * @c2h_vdev_db: The doorbell number to be used by guest. Set by host.
- * @h2c_vdev_db: The doorbell number to be used by host. Set by guest.
- */
-struct mic_device_ctrl {
- __le64 vdev;
- __u8 config_change;
- __u8 vdev_reset;
- __u8 guest_ack;
- __u8 host_ack;
- __u8 used_address_updated;
- __s8 c2h_vdev_db;
- __s8 h2c_vdev_db;
-} __attribute__ ((aligned(8)));
-
-/**
- * struct mic_bootparam: Virtio device independent information in device page
- *
- * @magic: A magic value used by the card to ensure it can see the host
- * @h2c_config_db: Host to Card Virtio config doorbell set by card
- * @node_id: Unique id of the node
- * @h2c_scif_db - Host to card SCIF doorbell set by card
- * @c2h_scif_db - Card to host SCIF doorbell set by host
- * @scif_host_dma_addr - SCIF host queue pair DMA address
- * @scif_card_dma_addr - SCIF card queue pair DMA address
- */
-struct mic_bootparam {
- __le32 magic;
- __s8 h2c_config_db;
- __u8 node_id;
- __u8 h2c_scif_db;
- __u8 c2h_scif_db;
- __u64 scif_host_dma_addr;
- __u64 scif_card_dma_addr;
-} __attribute__ ((aligned(8)));
-
-/**
- * struct mic_device_page: High level representation of the device page
- *
- * @bootparam: The bootparam structure is used for sharing information and
- * status updates between MIC host and card drivers.
- * @desc: Array of MIC virtio device descriptors.
- */
-struct mic_device_page {
- struct mic_bootparam bootparam;
- struct mic_device_desc desc[0];
-};
-/**
- * struct mic_vqconfig: This is how we expect the device configuration field
- * for a virtqueue to be laid out in config space.
- *
- * @address: Guest/MIC physical address of the virtio ring
- * (avail and desc rings)
- * @used_address: Guest/MIC physical address of the used ring
- * @num: The number of entries in the virtio_ring
- */
-struct mic_vqconfig {
- __le64 address;
- __le64 used_address;
- __le16 num;
-} __attribute__ ((aligned(8)));
-
-/*
- * The alignment to use between consumer and producer parts of vring.
- * This is pagesize for historical reasons.
- */
-#define MIC_VIRTIO_RING_ALIGN 4096
-
-#define MIC_MAX_VRINGS 4
-#define MIC_VRING_ENTRIES 128
-
-/*
- * Max vring entries (power of 2) to ensure desc and avail rings
- * fit in a single page
- */
-#define MIC_MAX_VRING_ENTRIES 128
-
-/**
- * Max size of the desc block in bytes: includes:
- * - struct mic_device_desc
- * - struct mic_vqconfig (num_vq of these)
- * - host and guest features
- * - virtio device config space
- */
-#define MIC_MAX_DESC_BLK_SIZE 256
-
-/**
- * struct _mic_vring_info - Host vring info exposed to userspace backend
- * for the avail index and magic for the card.
- *
- * @avail_idx: host avail idx
- * @magic: A magic debug cookie.
- */
-struct _mic_vring_info {
- __u16 avail_idx;
- __le32 magic;
-};
-
-/**
- * struct mic_vring - Vring information.
- *
- * @vr: The virtio ring.
- * @info: Host vring information exposed to the userspace backend for the
- * avail index and magic for the card.
- * @va: The va for the buffer allocated for vr and info.
- * @len: The length of the buffer required for allocating vr and info.
- */
-struct mic_vring {
- struct vring vr;
- struct _mic_vring_info *info;
- void *va;
- int len;
-};
-
-#define mic_aligned_desc_size(d) __mic_align(mic_desc_size(d), 8)
-
-#ifndef INTEL_MIC_CARD
-static inline unsigned mic_desc_size(const struct mic_device_desc *desc)
-{
- return sizeof(*desc) + desc->num_vq * sizeof(struct mic_vqconfig)
- + desc->feature_len * 2 + desc->config_len;
-}
-
-static inline struct mic_vqconfig *
-mic_vq_config(const struct mic_device_desc *desc)
-{
- return (struct mic_vqconfig *)(desc + 1);
-}
-
-static inline __u8 *mic_vq_features(const struct mic_device_desc *desc)
-{
- return (__u8 *)(mic_vq_config(desc) + desc->num_vq);
-}
-
-static inline __u8 *mic_vq_configspace(const struct mic_device_desc *desc)
-{
- return mic_vq_features(desc) + desc->feature_len * 2;
-}
-static inline unsigned mic_total_desc_size(struct mic_device_desc *desc)
-{
- return mic_aligned_desc_size(desc) + sizeof(struct mic_device_ctrl);
-}
-#endif
-
-/* Device page size */
-#define MIC_DP_SIZE 4096
-
-#define MIC_MAGIC 0xc0ffee00
-
-/**
- * enum mic_states - MIC states.
- */
-enum mic_states {
- MIC_READY = 0,
- MIC_BOOTING,
- MIC_ONLINE,
- MIC_SHUTTING_DOWN,
- MIC_RESETTING,
- MIC_RESET_FAILED,
- MIC_LAST
-};
-
-/**
- * enum mic_status - MIC status reported by card after
- * a host or card initiated shutdown or a card crash.
- */
-enum mic_status {
- MIC_NOP = 0,
- MIC_CRASHED,
- MIC_HALTED,
- MIC_POWER_OFF,
- MIC_RESTART,
- MIC_STATUS_LAST
-};
-
-#endif
diff --git a/include/uapi/linux/mic_ioctl.h b/include/uapi/linux/mic_ioctl.h
deleted file mode 100644
index 687b9cd9d3e2..000000000000
--- a/include/uapi/linux/mic_ioctl.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * Intel MIC Platform Software Stack (MPSS)
- *
- * Copyright(c) 2013 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * The full GNU General Public License is included in this distribution in
- * the file called "COPYING".
- *
- * Intel MIC Host driver.
- *
- */
-#ifndef _MIC_IOCTL_H_
-#define _MIC_IOCTL_H_
-
-#include <linux/types.h>
-
-/*
- * mic_copy - MIC virtio descriptor copy.
- *
- * @iov: An array of IOVEC structures containing user space buffers.
- * @iovcnt: Number of IOVEC structures in iov.
- * @vr_idx: The vring index.
- * @update_used: A non zero value results in used index being updated.
- * @out_len: The aggregate of the total length written to or read from
- * the virtio device.
- */
-struct mic_copy_desc {
-#ifdef __KERNEL__
- struct iovec __user *iov;
-#else
- struct iovec *iov;
-#endif
- __u32 iovcnt;
- __u8 vr_idx;
- __u8 update_used;
- __u32 out_len;
-};
-
-/*
- * Add a new virtio device
- * The (struct mic_device_desc *) pointer points to a device page entry
- * for the virtio device consisting of:
- * - struct mic_device_desc
- * - struct mic_vqconfig (num_vq of these)
- * - host and guest features
- * - virtio device config space
- * The total size referenced by the pointer should equal the size returned
- * by desc_size() in mic_common.h
- */
-#define MIC_VIRTIO_ADD_DEVICE _IOWR('s', 1, struct mic_device_desc *)
-
-/*
- * Copy the number of entries in the iovec and update the used index
- * if requested by the user.
- */
-#define MIC_VIRTIO_COPY_DESC _IOWR('s', 2, struct mic_copy_desc *)
-
-/*
- * Notify virtio device of a config change
- * The (__u8 *) pointer points to config space values for the device
- * as they should be written into the device page. The total size
- * referenced by the pointer should equal the config_len field of struct
- * mic_device_desc.
- */
-#define MIC_VIRTIO_CONFIG_CHANGE _IOWR('s', 5, __u8 *)
-
-#endif

Privacy Policy