path: root/kernel
AgeCommit message (Collapse)AuthorFilesLines
9 daysMerge tag 'kernel.fork.v6.3-rc2' of ↵Linus Torvalds1-1/+1
gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux Pull clone3 fix from Christian Brauner: "A simple fix for the clone3() system call. The CLONE_NEWTIME allows the creation of time namespaces. The flag reuses a bit from the CSIGNAL bits that are used in the legacy clone() system call to set the signal that gets sent to the parent after the child exits. The clone3() system call doesn't rely on CSIGNAL anymore as it uses a dedicated .exit_signal field in struct clone_args. So we blocked all CSIGNAL bits in clone3_args_valid(). When CLONE_NEWTIME was introduced and reused a CSIGNAL bit we forgot to adapt clone3_args_valid() causing CLONE_NEWTIME with clone3() to be rejected. Fix this" * tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux: selftests/clone3: test clone3 with CLONE_NEWTIME fork: allow CLONE_NEWTIME in clone3 flags
9 daysMerge tag 'vfs.misc.v6.3-rc2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping Pull vfs fixes from Christian Brauner: - When allocating pages for a watch queue failed, we didn't return an error causing userspace to proceed even though all subsequent notifcations would be lost. Make sure to return an error. - Fix a misformed tree entry for the idmapping maintainers entry. - When setting file leases from an idmapped mount via generic_setlease() we need to take the idmapping into account otherwise taking a lease would fail from an idmapped mount. - Remove two redundant assignments, one in splice code and the other in locks code, that static checkers complained about. * tag 'vfs.misc.v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: filelocks: use mount idmapping for setlease permission check fs/locks: Remove redundant assignment to cmd splice: Remove redundant assignment to ret MAINTAINERS: repair a malformed T: entry in IDMAPPED MOUNTS watch_queue: fix IOC_WATCH_QUEUE_SET_SIZE alloc error paths
12 daysMerge tag 'net-6.3-rc2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from netfilter and bpf. Current release - regressions: - core: avoid skb end_offset change in __skb_unclone_keeptruesize() - sched: - act_connmark: handle errno on tcf_idr_check_alloc - flower: fix fl_change() error recovery path - ieee802154: prevent user from crashing the host Current release - new code bugs: - eth: bnxt_en: fix the double free during device removal - tools: ynl: - fix enum-as-flags in the generic CLI - fully inherit attrs in subsets - re-license uniformly under GPL-2.0 or BSD-3-clause Previous releases - regressions: - core: use indirect calls helpers for sk_exit_memory_pressure() - tls: - fix return value for async crypto - avoid hanging tasks on the tx_lock - eth: ice: copy last block omitted in ice_get_module_eeprom() Previous releases - always broken: - core: avoid double iput when sock_alloc_file fails - af_unix: fix struct pid leaks in OOB support - tls: - fix possible race condition - fix device-offloaded sendpage straddling records - bpf: - sockmap: fix an infinite loop error - test_run: fix &xdp_frame misplacement for LIVE_FRAMES - fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR - netfilter: tproxy: fix deadlock due to missing BH disable - phylib: get rid of unnecessary locking - eth: bgmac: fix *initial* chip reset to support BCM5358 - eth: nfp: fix csum for ipsec offload - eth: mtk_eth_soc: fix RX data corruption issue Misc: - usb: qmi_wwan: add telit 0x1080 composition" * tag 'net-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits) tools: ynl: fix enum-as-flags in the generic CLI tools: ynl: move the enum classes to shared code net: avoid double iput when sock_alloc_file fails af_unix: fix struct pid leaks in OOB support eth: fealnx: bring back this old driver net: dsa: mt7530: permit port 5 to work without port 6 on MT7621 SoC net: microchip: sparx5: fix deletion of existing DSCP mappings octeontx2-af: Unlock contexts in the queue context cache in case of fault detection net/smc: fix fallback failed while sendmsg with fastopen ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause mailmap: update entries for Stephen Hemminger mailmap: add entry for Maxim Mikityanskiy nfc: change order inside nfc_se_io error path ethernet: ice: avoid gcc-9 integer overflow warning ice: don't ignore return codes in VSI related code ice: Fix DSCP PFC TLV creation net: usb: qmi_wwan: add Telit 0x1080 composition net: usb: cdc_mbim: avoid altsetting toggling for Telit FE990 netfilter: conntrack: adopt safer max chain length net: tls: fix device-offloaded sendpage straddling records ...
14 daysfork: allow CLONE_NEWTIME in clone3 flagsTobias Klauser1-1/+1
Currently, calling clone3() with CLONE_NEWTIME in clone_args->flags fails with -EINVAL. This is because CLONE_NEWTIME intersects with CSIGNAL. However, CSIGNAL was deprecated when clone3 was introduced in commit 7f192e3cd316 ("fork: add clone3"), allowing re-use of that part of clone flags. Fix this by explicitly allowing CLONE_NEWTIME in clone3_args_valid. This is also in line with the respective check in check_unshare_flags which allow CLONE_NEWTIME for unshare(). Fixes: 769071ac9f20 ("ns: Introduce Time Namespace") Cc: Andrey Vagin <avagin@openvz.org> Cc: Christian Brauner <brauner@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
14 dayswatch_queue: fix IOC_WATCH_QUEUE_SET_SIZE alloc error pathsDavid Disseldorp1-0/+1
The watch_queue_set_size() allocation error paths return the ret value set via the prior pipe_resize_ring() call, which will always be zero. As a result, IOC_WATCH_QUEUE_SET_SIZE callers such as "keyctl watch" fail to detect kernel wqueue->notes allocation failures and proceed to KEYCTL_WATCH_KEY, with any notifications subsequently lost. Fixes: c73be61cede58 ("pipe: Add general notification queue support") Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-03-06Merge tag 'for-netdev' of ↵Jakub Kicinski1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-03-06 We've added 8 non-merge commits during the last 7 day(s) which contain a total of 9 files changed, 64 insertions(+), 18 deletions(-). The main changes are: 1) Fix BTF resolver for DATASEC sections when a VAR points at a modifier, that is, keep resolving such instances instead of bailing out, from Lorenz Bauer. 2) Fix BPF test framework with regards to xdp_frame info misplacement in the "live packet" code, from Alexander Lobakin. 3) Fix an infinite loop in BPF sockmap code for TCP/UDP/AF_UNIX, from Liu Jian. 4) Fix a build error for riscv BPF JIT under PERF_EVENTS=n, from Randy Dunlap. 5) Several BPF doc fixes with either broken links or external instead of internal doc links, from Bagas Sanjaya. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: check that modifier resolves after pointer btf: fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES bpf, doc: Link to submitting-patches.rst for general patch submission info bpf, doc: Do not link to docs.kernel.org for kselftest link bpf, sockmap: Fix an infinite loop error when len is 0 in tcp_bpf_recvmsg_parser() riscv, bpf: Fix patch_text implicit declaration bpf, docs: Fix link to BTF doc ==================== Link: https://lore.kernel.org/r/20230306215944.11981-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-06btf: fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTRLorenz Bauer1-0/+1
btf_datasec_resolve contains a bug that causes the following BTF to fail loading: [1] DATASEC a size=2 vlen=2 type_id=4 offset=0 size=1 type_id=7 offset=1 size=1 [2] INT (anon) size=1 bits_offset=0 nr_bits=8 encoding=(none) [3] PTR (anon) type_id=2 [4] VAR a type_id=3 linkage=0 [5] INT (anon) size=1 bits_offset=0 nr_bits=8 encoding=(none) [6] TYPEDEF td type_id=5 [7] VAR b type_id=6 linkage=0 This error message is printed during btf_check_all_types: [1] DATASEC a size=2 vlen=2 type_id=7 offset=1 size=1 Invalid type By tracing btf_*_resolve we can pinpoint the problem: btf_datasec_resolve(depth: 1, type_id: 1, mode: RESOLVE_TBD) = 0 btf_var_resolve(depth: 2, type_id: 4, mode: RESOLVE_TBD) = 0 btf_ptr_resolve(depth: 3, type_id: 3, mode: RESOLVE_PTR) = 0 btf_var_resolve(depth: 2, type_id: 4, mode: RESOLVE_PTR) = 0 btf_datasec_resolve(depth: 1, type_id: 1, mode: RESOLVE_PTR) = -22 The last invocation of btf_datasec_resolve should invoke btf_var_resolve by means of env_stack_push, instead it returns EINVAL. The reason is that env_stack_push is never executed for the second VAR. if (!env_type_is_resolve_sink(env, var_type) && !env_type_is_resolved(env, var_type_id)) { env_stack_set_next_member(env, i + 1); return env_stack_push(env, var_type, var_type_id); } env_type_is_resolve_sink() changes its behaviour based on resolve_mode. For RESOLVE_PTR, we can simplify the if condition to the following: (btf_type_is_modifier() || btf_type_is_ptr) && !env_type_is_resolved() Since we're dealing with a VAR the clause evaluates to false. This is not sufficient to trigger the bug however. The log output and EINVAL are only generated if btf_type_id_size() fails. if (!btf_type_id_size(btf, &type_id, &type_size)) { btf_verifier_log_vsi(env, v->t, vsi, "Invalid type"); return -EINVAL; } Most types are sized, so for example a VAR referring to an INT is not a problem. The bug is only triggered if a VAR points at a modifier. Since we skipped btf_var_resolve that modifier was also never resolved, which means that btf_resolved_type_id returns 0 aka VOID for the modifier. This in turn causes btf_type_id_size to return NULL, triggering EINVAL. To summarise, the following conditions are necessary: - VAR pointing at PTR, STRUCT, UNION or ARRAY - Followed by a VAR pointing at TYPEDEF, VOLATILE, CONST, RESTRICT or TYPE_TAG The fix is to reset resolve_mode to RESOLVE_TBD before attempting to resolve a VAR from a DATASEC. Fixes: 1dc92851849c ("bpf: kernel side support for BTF Var and DataSec") Signed-off-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/r/20230306112138.155352-2-lmb@isovalent.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-03-05Merge tag 'irq-urgent-2023-03-05' of ↵Linus Torvalds4-13/+39
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "A set of updates for the interrupt susbsystem: - Prevent possible NULL pointer derefences in irq_data_get_affinity_mask() and irq_domain_create_hierarchy() - Take the per device MSI lock before invoking code which relies on it being hold - Make sure that MSI descriptors are unreferenced before freeing them. This was overlooked when the platform MSI code was converted to use core infrastructure and results in a fals positive warning - Remove dead code in the MSI subsystem - Clarify the documentation for pci_msix_free_irq() - More kobj_type constification" * tag 'irq-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/msi, platform-msi: Ensure that MSI descriptors are unreferenced genirq/msi: Drop dead domain name assignment irqdomain: Add missing NULL pointer check in irq_domain_create_hierarchy() genirq/irqdesc: Make kobj_type structures constant PCI/MSI: Clarify usage of pci_msix_free_irq() genirq/msi: Take the per-device MSI lock before validating the control structure genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask()
2023-03-04Merge tag 'mm-hotfixes-stable-2023-03-04-13-12' of ↵Linus Torvalds1-18/+26
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "17 hotfixes. Eight are for MM and seven are for other parts of the kernel. Seven are cc:stable and eight address post-6.3 issues or were judged unsuitable for -stable backporting" * tag 'mm-hotfixes-stable-2023-03-04-13-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mailmap: map Dikshita Agarwal's old address to his current one mailmap: map Vikash Garodia's old address to his current one fs/cramfs/inode.c: initialize file_ra_state fs: hfsplus: fix UAF issue in hfsplus_put_super panic: fix the panic_print NMI backtrace setting lib: parser: update documentation for match_NUMBER functions kasan, x86: don't rename memintrinsics in uninstrumented files kasan: test: fix test for new meminstrinsic instrumentation kasan: treat meminstrinsic as builtins in uninstrumented files kasan: emit different calls for instrumentable memintrinsics ocfs2: fix non-auto defrag path not working issue ocfs2: fix defrag path triggering jbd2 ASSERT mailmap: map Georgi Djakov's old Linaro address to his current one mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON lib/zlib: DFLTCC deflate does not write all available bits for Z_NO_FLUSH mm/damon/paddr: fix missing folio_put() mm/mremap: fix dup_anon_vma() in vma_merge() case 4
2023-03-03umh: simplify the capability pointer logicLinus Torvalds1-13/+5
The usermodehelper code uses two fake pointers for the two capability cases: CAP_BSET for reading and writing 'usermodehelper_bset', and CAP_PI to read and write 'usermodehelper_inheritable'. This seems to be a completely unnecessary indirection, since we could instead just use the pointers themselves, and never have to do any "if this then that" kind of logic. So just get rid of the fake pointer values, and use the real pointer values instead. Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Kees Cook <keescook@chromium.org> Cc: Iurii Zaikin <yzaikin@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-03-03Merge tag 'pm-6.3-rc1-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These update power capping (new hardware support and cleanup) and cpufreq (bug fixes, cleanups and intel_pstate adjustment for a new platform). Specifics: - Fix error handling in the apple-soc cpufreq driver (Dan Carpenter) - Change the log level of a message in the amd-pstate cpufreq driver so it is more visible to users (Kai-Heng Feng) - Adjust the balance_performance EPP value for Sapphire Rapids in the intel_pstate cpufreq driver (Srinivas Pandruvada) - Remove MODULE_LICENSE from 3 pieces of non-modular code (Nick Alcock) - Make a read-only kobj_type structure in the schedutil cpufreq governor constant (Thomas Weißschuh) - Add Add Power Limit4 support for Meteor Lake SoC to the Intel RAPL power capping driver (Sumeet Pawnikar)" * tag 'pm-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: apple-soc: Fix an IS_ERR() vs NULL check powercap: remove MODULE_LICENSE in non-modules cpufreq: intel_pstate: remove MODULE_LICENSE in non-modules powercap: RAPL: Add Power Limit4 support for Meteor Lake SoC cpufreq: amd-pstate: remove MODULE_LICENSE in non-modules cpufreq: schedutil: make kobj_type structure constant cpufreq: amd-pstate: Let user know amd-pstate is disabled cpufreq: intel_pstate: Adjust balance_performance EPP for Sapphire Rapids
2023-03-03Merge tag 'block-6.3-2023-03-03' of git://git.kernel.dk/linuxLinus Torvalds1-5/+1
Pull block fixes from Jens Axboe: - NVMe pull request via Christoph: - Don't access released socket during error recovery (Akinobu Mita) - Bring back auto-removal of deleted namespaces during sequential scan (Christoph Hellwig) - Fix an error code in nvme_auth_process_dhchap_challenge (Dan Carpenter) - Show well known discovery name (Daniel Wagner) - Add a missing endianess conversion in effects masking (Keith Busch) - Fix for a regression introduced in blk-rq-qos during init in this merge window (Breno) - Reorder a few fields in struct blk_mq_tag_set, eliminating a few holes and shrinking it (Christophe) - Remove redundant bdev_get_queue() NULL checks (Juhyung) - Add sed-opal single user mode support flag (Luca) - Remove SQE128 check in ublk as it isn't needed, saving some memory (Ming) - Op specific segment checking for cloned requests (Uday) - Exclusive open partition scan fixes (Yu) - Loop offset/size checking before assigning them in the device (Zhong) - Bio polling fixes (me) * tag 'block-6.3-2023-03-03' of git://git.kernel.dk/linux: blk-mq: enforce op-specific segment limits in blk_insert_cloned_request nvme-fabrics: show well known discovery name nvme-tcp: don't access released socket during error recovery nvme-auth: fix an error code in nvme_auth_process_dhchap_challenge() nvme: bring back auto-removal of deleted namespaces during sequential scan blk-iocost: Pass gendisk to ioc_refresh_params nvme: fix sparse warning on effects masking block: be a bit more careful in checking for NULL bdev while polling block: clear bio->bi_bdev when putting a bio back in the cache loop: loop_set_status_from_info() check before assignment ublk: remove check IO_URING_F_SQE128 in ublk_ch_uring_cmd block: remove more NULL checks after bdev_get_queue() blk-mq: Reorder fields in 'struct blk_mq_tag_set' block: fix scan partition for exclusively open device again block: Revert "block: Do not reread partition table on exclusively open device" sed-opal: add support flag for SUM in status ioctl
2023-03-02panic: fix the panic_print NMI backtrace settingGuilherme G. Piccoli1-18/+26
Commit 8d470a45d1a6 ("panic: add option to dump all CPUs backtraces in panic_print") introduced a setting for the "panic_print" kernel parameter to allow users to request a NMI backtrace on panic. Problem is that the panic_print handling happens after the secondary CPUs are already disabled, hence this option ended-up being kind of a no-op - kernel skips the NMI trace in idling CPUs, which is the case of offline CPUs. Fix it by checking the NMI backtrace bit in the panic_print prior to the CPU disabling function. Link: https://lkml.kernel.org/r/20230226160838.414257-1-gpiccoli@igalia.com Fixes: 8d470a45d1a6 ("panic: add option to dump all CPUs backtraces in panic_print") Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Cc: <stable@vger.kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: Feng Tang <feng.tang@intel.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Kees Cook <keescook@chromium.org> Cc: Michael Kelley <mikelley@microsoft.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-02genirq/msi, platform-msi: Ensure that MSI descriptors are unreferencedThomas Gleixner1-1/+22
Miquel reported a warning in the MSI core which is triggered when interrupts are freed via platform_msi_device_domain_free(). This code got reworked to use core functions for freeing the MSI descriptors, but nothing took care to clear the msi_desc->irq entry, which then triggers the warning in msi_free_msi_desc() which uses desc->irq to validate that the descriptor has been torn down. The same issue exists in msi_domain_populate_irqs(). Up to the point that msi_free_msi_descs() grew a warning for this case, this went un-noticed. Provide the counterpart of msi_domain_populate_irqs() and invoke it in platform_msi_device_domain_free() before freeing the interrupts and MSI descriptors and also in the error path of msi_domain_populate_irqs(). Fixes: 2f2940d16823 ("genirq/msi: Remove filter from msi_free_descs_free_range()") Reported-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87mt4wkwnv.ffs@tglx
2023-03-01capability: just use a 'u64' instead of a 'u32[2]' arrayLinus Torvalds3-87/+64
Back in 2008 we extended the capability bits from 32 to 64, and we did it by extending the single 32-bit capability word from one word to an array of two words. It was then obfuscated by hiding the "2" behind two macro expansions, with the reasoning being that maybe it gets extended further some day. That reasoning may have been valid at the time, but the last thing we want to do is to extend the capability set any more. And the array of values not only causes source code oddities (with loops to deal with it), but also results in worse code generation. It's a lose-lose situation. So just change the 'u32[2]' into a 'u64' and be done with it. We still have to deal with the fact that the user space interface is designed around an array of these 32-bit values, but that was the case before too, since the array layouts were different (ie user space doesn't use an array of 32-bit values for individual capability masks, but an array of 32-bit slices of multiple masks). So that marshalling of data is actually simplified too, even if it does remain somewhat obscure and odd. This was all triggered by my reaction to the new "cap_isidentical()" introduced recently. By just using a saner data structure, it went from unsigned __capi; CAP_FOR_EACH_U32(__capi) { if (a.cap[__capi] != b.cap[__capi]) return false; } return true; to just being return a.val == b.val; instead. Which is rather more obvious both to humans and to compilers. Cc: Mateusz Guzik <mjguzik@gmail.com> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Serge Hallyn <serge@hallyn.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Paul Moore <paul@paul-moore.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-02-27Merge tag 'dma-mapping-6.3-2022-02-27' of ↵Linus Torvalds1-9/+2
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - remove a not very useful and now unused swiotlb API (Christoph Hellwig) - fix a section mismatch (Randy Dunlap) * tag 'dma-mapping-6.3-2022-02-27' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: mark swiotlb_memblock_alloc() as __init swiotlb: remove swiotlb_max_segment
2023-02-26Merge tag 'kbuild-v6.3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Change V=1 option to print both short log and full command log - Allow V=1 and V=2 to be combined as V=12 - Make W=1 detect wrong .gitignore files - Tree-wide cleanups for unused command line arguments passed to Clang - Stop using -Qunused-arguments with Clang - Make scripts/setlocalversion handle only correct release tags instead of any arbitrary annotated tag - Create Debian and RPM source packages without cleaning the source tree - Various cleanups for packaging * tag 'kbuild-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (74 commits) kbuild: rpm-pkg: remove unneeded KERNELRELEASE from modules/headers_install docs: kbuild: remove description of KBUILD_LDS_MODULE .gitattributes: use 'dts' diff driver for *.dtso files kbuild: deb-pkg: improve the usability of source package kbuild: deb-pkg: fix binary-arch and clean in debian/rules kbuild: tar-pkg: use tar rules in scripts/Makefile.package kbuild: make perf-tar*-src-pkg work without relying on git kbuild: deb-pkg: switch over to source format 3.0 (quilt) kbuild: deb-pkg: make .orig tarball a hard link if possible kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile kbuild: srcrpm-pkg: create source package without cleaning kbuild: rpm-pkg: build binary packages from source rpm kbuild: deb-pkg: create source package without cleaning kbuild: add a tool to list files ignored by git Documentation/llvm: add Chimera Linux, Google and Meta datacenters setlocalversion: use only the correct release tag for git-describe setlocalversion: clean up the construction of version output .gitignore: ignore *.cover and *.mbx kbuild: remove --include-dir MAKEFLAG from top Makefile kbuild: fix trivial typo in comment ...
2023-02-25Merge tag 'probes-v6.3-2' of ↵Linus Torvalds8-185/+96
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull kprobes cleanup updates from Masami Hiramatsu: "These are probe events cleanups, no new features but improve readability: - Rename print_probe_args() to trace_probe_print_args() and un-inline it - Introduce a set of default data fetch functions for dynamic probe events - Extract common code of data fetch process of dynamic probe events" * tag 'probes-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: kernel/trace: extract common part in process_fetch_insn kernel/trace: Provide default impelentations defined in trace_probe_tmpl.h kernel/trace: Introduce trace_probe_print_args and use it in *probes
2023-02-25Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha Pull alpha updates from Al Viro: "Mostly small janitorial fixes but there's also more important ones: a patch to fix loading large modules from Edward Humes, and some fixes from Al Viro" [ The fixes from Al mostly came in separately through Al's trees too and are now duplicated.. - Linus ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha: alpha: in_irq() cleanup alpha: lazy FPU switching alpha/boot/misc: trim unused declarations alpha/boot/tools/objstrip: fix the check for ELF header alpha/boot: fix the breakage from -isystem series... alpha: fix FEN fault handling alpha: Avoid comma separated statements alpha: fixed a typo in core_cia.c alpha: remove unused __SLOW_DOWN_IO and SLOW_DOWN_IO definitions alpha: update config files alpha: fix R_ALPHA_LITERAL reloc for large modules alpha: Add some spaces to ensure format specification alpha: replace NR_SYSCALLS by NR_syscalls alpha: Remove redundant local asm header redirections alpha: Implement "current_stack_pointer" alpha: remove redundant err variable alpha: osf_sys: reduce kernel log spamming on invalid osf_mount call typenr
2023-02-25Merge tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxlLinus Torvalds1-14/+0
Pull Compute Express Link (CXL) updates from Dan Williams: "To date Linux has been dependent on platform-firmware to map CXL RAM regions and handle events / errors from devices. With this update we can now parse / update the CXL memory layout, and report events / errors from devices. This is a precursor for the CXL subsystem to handle the end-to-end "RAS" flow for CXL memory. i.e. the flow that for DDR-attached-DRAM is handled by the EDAC driver where it maps system physical address events to a field-replaceable-unit (FRU / endpoint device). In general, CXL has the potential to standardize what has historically been a pile of memory-controller-specific error handling logic. Another change of note is the default policy for handling RAM-backed device-dax instances. Previously the default access mode was "device", mmap(2) a device special file to access memory. The new default is "kmem" where the address range is assigned to the core-mm via add_memory_driver_managed(). This saves typical users from wondering why their platform memory is not visible via free(1) and stuck behind a device-file. At the same time it allows expert users to deploy policy to, for example, get dedicated access to high performance memory, or hide low performance memory from general purpose kernel allocations. This affects not only CXL, but also systems with high-bandwidth-memory that platform-firmware tags with the EFI_MEMORY_SP (special purpose) designation. Summary: - CXL RAM region enumeration: instantiate 'struct cxl_region' objects for platform firmware created memory regions - CXL RAM region provisioning: complement the existing PMEM region creation support with RAM region support - "Soft Reservation" policy change: Online (memory hot-add) soft-reserved memory (EFI_MEMORY_SP) by default, but still allow for setting aside such memory for dedicated access via device-dax. - CXL Events and Interrupts: Takeover CXL event handling from platform-firmware (ACPI calls this CXL Memory Error Reporting) and export CXL Events via Linux Trace Events. - Convey CXL _OSC results to drivers: Similar to PCI, let the CXL subsystem interrogate the result of CXL _OSC negotiation. - Emulate CXL DVSEC Range Registers as "decoders": Allow for first-generation devices that pre-date the definition of the CXL HDM Decoder Capability to translate the CXL DVSEC Range Registers into 'struct cxl_decoder' objects. - Set timestamp: Per spec, set the device timestamp in case of hotplug, or if platform-firwmare failed to set it. - General fixups: linux-next build issues, non-urgent fixes for pre-production hardware, unit test fixes, spelling and debug message improvements" * tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (66 commits) dax/kmem: Fix leak of memory-hotplug resources cxl/mem: Add kdoc param for event log driver state cxl/trace: Add serial number to trace points cxl/trace: Add host output to trace points cxl/trace: Standardize device information output cxl/pci: Remove locked check for dvsec_range_allowed() cxl/hdm: Add emulation when HDM decoders are not committed cxl/hdm: Create emulated cxl_hdm for devices that do not have HDM decoders cxl/hdm: Emulate HDM decoder from DVSEC range registers cxl/pci: Refactor cxl_hdm_decode_init() cxl/port: Export cxl_dvsec_rr_decode() to cxl_port cxl/pci: Break out range register decoding from cxl_hdm_decode_init() cxl: add RAS status unmasking for CXL cxl: remove unnecessary calling of pci_enable_pcie_error_reporting() dax/hmem: build hmem device support as module if possible dax: cxl: add CXL_REGION dependency cxl: avoid returning uninitialized error code cxl/pmem: Fix nvdimm registration races cxl/mem: Fix UAPI command comment cxl/uapi: Tag commands from cxl_query_cmd() ...
2023-02-24Merge tag 'for-linus-iommufd' of ↵Linus Torvalds2-39/+27
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd Pull iommufd updates from Jason Gunthorpe: "Some polishing and small fixes for iommufd: - Remove IOMMU_CAP_INTR_REMAP, instead rely on the interrupt subsystem - Use GFP_KERNEL_ACCOUNT inside the iommu_domains - Support VFIO_NOIOMMU mode with iommufd - Various typos - A list corruption bug if HWPTs are used for attach" * tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: iommufd: Do not add the same hwpt to the ioas->hwpt_list twice iommufd: Make sure to zero vfio_iommu_type1_info before copying to user vfio: Support VFIO_NOIOMMU with iommufd iommufd: Add three missing structures in ucmd_buffer selftests: iommu: Fix test_cmd_destroy_access() call in user_copy iommu: Remove IOMMU_CAP_INTR_REMAP irq/s390: Add arch_is_isolated_msi() for s390 iommu/x86: Replace IOMMU_CAP_INTR_REMAP with IRQ_DOMAIN_FLAG_ISOLATED_MSI genirq/msi: Rename IRQ_DOMAIN_MSI_REMAP to IRQ_DOMAIN_ISOLATED_MSI genirq/irqdomain: Remove unused irq_domain_check_msi_remap() code iommufd: Convert to msi_device_has_isolated_msi() vfio/type1: Convert to iommu_group_has_isolated_msi() iommu: Add iommu_group_has_isolated_msi() genirq/msi: Add msi_device_has_isolated_msi()
2023-02-24Merge tag 'driver-core-6.3-rc1' of ↵Linus Torvalds2-4/+10
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.3-rc1. There's a lot of changes this development cycle, most of the work falls into two different categories: - fw_devlink fixes and updates. This has gone through numerous review cycles and lots of review and testing by lots of different devices. Hopefully all should be good now, and Saravana will be keeping a watch for any potential regression on odd embedded systems. - driver core changes to work to make struct bus_type able to be moved into read-only memory (i.e. const) The recent work with Rust has pointed out a number of areas in the driver core where we are passing around and working with structures that really do not have to be dynamic at all, and they should be able to be read-only making things safer overall. This is the contuation of that work (started last release with kobject changes) in moving struct bus_type to be constant. We didn't quite make it for this release, but the remaining patches will be finished up for the release after this one, but the groundwork has been laid for this effort. Other than that we have in here: - debugfs memory leak fixes in some subsystems - error path cleanups and fixes for some never-able-to-be-hit codepaths. - cacheinfo rework and fixes - Other tiny fixes, full details are in the shortlog All of these have been in linux-next for a while with no reported problems" [ Geert Uytterhoeven points out that that last sentence isn't true, and that there's a pending report that has a fix that is queued up - Linus ] * tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits) debugfs: drop inline constant formatting for ERR_PTR(-ERROR) OPP: fix error checking in opp_migrate_dentry() debugfs: update comment of debugfs_rename() i3c: fix device.h kernel-doc warnings dma-mapping: no need to pass a bus_type into get_arch_dma_ops() driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place Revert "driver core: add error handling for devtmpfs_create_node()" Revert "devtmpfs: add debug info to handle()" Revert "devtmpfs: remove return value of devtmpfs_delete_node()" driver core: cpu: don't hand-override the uevent bus_type callback. devtmpfs: remove return value of devtmpfs_delete_node() devtmpfs: add debug info to handle() driver core: add error handling for devtmpfs_create_node() driver core: bus: update my copyright notice driver core: bus: add bus_get_dev_root() function driver core: bus: constify bus_unregister() driver core: bus: constify some internal functions driver core: bus: constify bus_get_kset() driver core: bus: constify bus_register/unregister_notifier() driver core: remove private pointer from struct bus_type ...
2023-02-24Merge tag 'char-misc-6.3-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver subsystem updates from Greg KH: "Here is the large set of driver changes for char/misc drivers and other smaller driver subsystems that flow through this git tree. Included in here are: - New IIO drivers and features and improvments in that subsystem - New hwtracing drivers and additions to that subsystem - lots of interconnect changes and new drivers as that subsystem seems under very active development recently. This required also merging in the icc subsystem changes through this tree. - FPGA driver updates - counter subsystem and driver updates - MHI driver updates - nvmem driver updates - documentation updates - Other smaller driver updates and fixes, full details in the shortlog All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits) scripts/tags.sh: fix incompatibility with PCRE2 firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries mei: lower the log level for non-fatal failed messages mei: bus: disallow driver match while dismantling device misc: vmw_balloon: fix memory leak with using debugfs_lookup() nvmem: stm32: fix OPTEE dependency dt-bindings: nvmem: qfprom: add IPQ8074 compatible nvmem: qcom-spmi-sdam: register at device init time nvmem: rave-sp-eeprm: fix kernel-doc bad line warning nvmem: stm32: detect bsec pta presence for STM32MP15x nvmem: stm32: add OP-TEE support for STM32MP13x nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of() nvmem: core: add nvmem_add_one_cell() nvmem: core: drop the removal of the cells in nvmem_add_cells() nvmem: core: move struct nvmem_cell_info to nvmem-provider.h nvmem: core: add an index parameter to the cell of: property: add #nvmem-cell-cells property of: property: make #.*-cells optional for simple props of: base: add of_parse_phandle_with_optional_args() net: add helper eth_addr_add() ...
2023-02-24genirq/msi: Drop dead domain name assignmentJohan Hovold1-4/+1
Since commit d59f6617eef0 ("genirq: Allow fwnode to carry name information only") an IRQ domain is always given a name during allocation (e.g. used for the debugfs entry). Drop the unused fallback name assignment when creating MSI domains. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230224130509.27814-1-johan+linaro@kernel.org
2023-02-23Merge tag 'mm-nonmm-stable-2023-02-20-15-29' of ↵Linus Torvalds6-7/+111
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: "There is no particular theme here - mainly quick hits all over the tree. Most notable is a set of zlib changes from Mikhail Zaslonko which enhances and fixes zlib's use of S390 hardware support: 'lib/zlib: Set of s390 DFLTCC related patches for kernel zlib'" * tag 'mm-nonmm-stable-2023-02-20-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (55 commits) Update CREDITS file entry for Jesper Juhl sparc: allow PM configs for sparc32 COMPILE_TEST hung_task: print message when hung_task_warnings gets down to zero. arch/Kconfig: fix indentation scripts/tags.sh: fix the Kconfig tags generation when using latest ctags nilfs2: prevent WARNING in nilfs_dat_commit_end() lib/zlib: remove redundation assignement of avail_in dfltcc_gdht() lib/Kconfig.debug: do not enable DEBUG_PREEMPT by default lib/zlib: DFLTCC always switch to software inflate for Z_PACKET_FLUSH option lib/zlib: DFLTCC support inflate with small window lib/zlib: Split deflate and inflate states for DFLTCC lib/zlib: DFLTCC not writing header bits when avail_out == 0 lib/zlib: fix DFLTCC ignoring flush modes when avail_in == 0 lib/zlib: fix DFLTCC not flushing EOBS when creating raw streams lib/zlib: implement switching between DFLTCC and software lib/zlib: adjust offset calculation for dfltcc_state nilfs2: replace WARN_ONs for invalid DAT metadata block requests scripts/spelling.txt: add "exsits" pattern and fix typo instances fs: gracefully handle ->get_block not mapping bh in __mpage_writepage cramfs: Kconfig: fix spelling & punctuation ...
2023-02-23Merge tag 'mm-stable-2023-02-20-13-37' of ↵Linus Torvalds12-32/+126
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Daniel Verkamp has contributed a memfd series ("mm/memfd: add F_SEAL_EXEC") which permits the setting of the memfd execute bit at memfd creation time, with the option of sealing the state of the X bit. - Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset() thread-safe for pmd unshare") which addresses a rare race condition related to PMD unsharing. - Several folioification patch serieses from Matthew Wilcox, Vishal Moola, Sidhartha Kumar and Lorenzo Stoakes - Johannes Weiner has a series ("mm: push down lock_page_memcg()") which does perform some memcg maintenance and cleanup work. - SeongJae Park has added DAMOS filtering to DAMON, with the series "mm/damon/core: implement damos filter". These filters provide users with finer-grained control over DAMOS's actions. SeongJae has also done some DAMON cleanup work. - Kairui Song adds a series ("Clean up and fixes for swap"). - Vernon Yang contributed the series "Clean up and refinement for maple tree". - Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It adds to MGLRU an LRU of memcgs, to improve the scalability of global reclaim. - David Hildenbrand has added some userfaultfd cleanup work in the series "mm: uffd-wp + change_protection() cleanups". - Christoph Hellwig has removed the generic_writepages() library function in the series "remove generic_writepages". - Baolin Wang has performed some maintenance on the compaction code in his series "Some small improvements for compaction". - Sidhartha Kumar is doing some maintenance work on struct page in his series "Get rid of tail page fields". - David Hildenbrand contributed some cleanup, bugfixing and generalization of pte management and of pte debugging in his series "mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap PTEs". - Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation flag in the series "Discard __GFP_ATOMIC". - Sergey Senozhatsky has improved zsmalloc's memory utilization with his series "zsmalloc: make zspage chain size configurable". - Joey Gouly has added prctl() support for prohibiting the creation of writeable+executable mappings. The previous BPF-based approach had shortcomings. See "mm: In-kernel support for memory-deny-write-execute (MDWE)". - Waiman Long did some kmemleak cleanup and bugfixing in the series "mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF". - T.J. Alumbaugh has contributed some MGLRU cleanup work in his series "mm: multi-gen LRU: improve". - Jiaqi Yan has provided some enhancements to our memory error statistics reporting, mainly by presenting the statistics on a per-node basis. See the series "Introduce per NUMA node memory error statistics". - Mel Gorman has a second and hopefully final shot at fixing a CPU-hog regression in compaction via his series "Fix excessive CPU usage during compaction". - Christoph Hellwig does some vmalloc maintenance work in the series "cleanup vfree and vunmap". - Christoph Hellwig has removed block_device_operations.rw_page() in ths series "remove ->rw_page". - We get some maple_tree improvements and cleanups in Liam Howlett's series "VMA tree type safety and remove __vma_adjust()". - Suren Baghdasaryan has done some work on the maintainability of our vm_flags handling in the series "introduce vm_flags modifier functions". - Some pagemap cleanup and generalization work in Mike Rapoport's series "mm, arch: add generic implementation of pfn_valid() for FLATMEM" and "fixups for generic implementation of pfn_valid()" - Baoquan He has done some work to make /proc/vmallocinfo and /proc/kcore better represent the real state of things in his series "mm/vmalloc.c: allow vread() to read out vm_map_ram areas". - Jason Gunthorpe rationalized the GUP system's interface to the rest of the kernel in the series "Simplify the external interface for GUP". - SeongJae Park wishes to migrate people from DAMON's debugfs interface over to its sysfs interface. To support this, we'll temporarily be printing warnings when people use the debugfs interface. See the series "mm/damon: deprecate DAMON debugfs interface". - Andrey Konovalov provided the accurately named "lib/stackdepot: fixes and clean-ups" series. - Huang Ying has provided a dramatic reduction in migration's TLB flush IPI rates with the series "migrate_pages(): batch TLB flushing". - Arnd Bergmann has some objtool fixups in "objtool warning fixes". * tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits) include/linux/migrate.h: remove unneeded externs mm/memory_hotplug: cleanup return value handing in do_migrate_range() mm/uffd: fix comment in handling pte markers mm: change to return bool for isolate_movable_page() mm: hugetlb: change to return bool for isolate_hugetlb() mm: change to return bool for isolate_lru_page() mm: change to return bool for folio_isolate_lru() objtool: add UACCESS exceptions for __tsan_volatile_read/write kmsan: disable ftrace in kmsan core code kasan: mark addr_has_metadata __always_inline mm: memcontrol: rename memcg_kmem_enabled() sh: initialize max_mapnr m68k/nommu: add missing definition of ARCH_PFN_OFFSET mm: percpu: fix incorrect size in pcpu_obj_full_size() maple_tree: reduce stack usage with gcc-9 and earlier mm: page_alloc: call panic() when memoryless node allocation fails mm: multi-gen LRU: avoid futile retries migrate_pages: move THP/hugetlb migration support check to simplify code migrate_pages: batch flushing TLB migrate_pages: share more code between _unmap and _move ...
2023-02-24kernel/trace: extract common part in process_fetch_insnSong Chen4-37/+34
Each probe has an instance of process_fetch_insn respectively, but they have something in common. This patch aims to extract the common part into process_common_fetch_insn which can be shared by each probe, and they only need to focus on their special cases. Signed-off-by: Song Chen <chensong_2000@189.cn> Suggested-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
2023-02-24kernel/trace: Provide default impelentations defined in trace_probe_tmpl.hSong Chen4-116/+29
There are 6 function definitions in trace_probe_tmpl.h, they are: 1, fetch_store_strlen 2, fetch_store_string 3, fetch_store_strlen_user 4, fetch_store_string_user 5, probe_mem_read 6, probe_mem_read_user Every C file which includes trace_probe_tmpl.h has to implement them, otherwise it gets warnings and errors. However, some of them are identical, like kprobe and eprobe, as a result, there is a lot redundant code in those 2 files. This patch would like to provide default behaviors for those functions which kprobe and eprobe can share by just including trace_probe_kernel.h with trace_probe_tmpl.h together. It removes redundant code, increases readability, and more importantly, makes it easier to introduce a new feature based on trace probe (it's possible). Link: https://lore.kernel.org/all/1672382018-18347-1-git-send-email-chensong_2000@189.cn/ Signed-off-by: Song Chen <chensong_2000@189.cn> Reported-by: kernel test robot <lkp@intel.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2023-02-24kernel/trace: Introduce trace_probe_print_args and use it in *probesSong Chen6-32/+33
print_probe_args is currently inplemented in trace_probe_tmpl.h and included by *probes, as a result, each probe has an identical copy. This patch will move it to trace_probe.c as an new API, each probe calls it to print their args in trace file. Link: https://lore.kernel.org/all/1672382000-18304-1-git-send-email-chensong_2000@189.cn/ Signed-off-by: Song Chen <chensong_2000@189.cn> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2023-02-23Merge tag 'sysctl-6.3-rc1' of ↵Linus Torvalds1-19/+24
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull sysctl update from Luis Chamberlain: "Just one fix which just came in. Sadly the eager beavers willing to help with the sysctl moves have slowed" * tag 'sysctl-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: sysctl: fix proc_dobool() usability
2023-02-23Merge tag 'modules-6.3-rc1' of ↵Linus Torvalds2-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull modules updates from Luis Chamberlain: "Nothing exciting at all for modules for v6.3. The biggest change is just the change of INSTALL_MOD_DIR from "extra" to "updates" which I found lingered for ages for no good reason while testing the CXL mock driver [0]. The CXL mock driver has no kconfig integration and requires building an external module... and re-building the *rest* of the production drivers. This mock driver when loaded but not the production ones will crash. All this can obviously be fixed by integrating kconfig semantics into such test module, however that's not desirable by the maintainer, and so sensible defaults must be used to ensure a default "make modules_install" will suffice for most distros which do not have a file like /etc/depmod.d/dist.conf with something like `search updates extra built-in`. Since most distros rely on kmod and since its inception the "updates" directory is always in the search path it makes more sense to use that than the "extra" which only *some* RH based systems rely on. All this stuff has been on linux-next for a while" [0] https://lkml.kernel.org/r/20221209062919.1096779-1-mcgrof@kernel.org * tag 'modules-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: Documentation: livepatch: module-elf-format: Remove local klp_modinfo definition module.h: Document klp_modinfo struct using kdoc module: Use kstrtobool() instead of strtobool() kernel/params.c: Use kstrtobool() instead of strtobool() test_kmod: stop kernel-doc warnings kbuild: Modify default INSTALL_MOD_DIR from extra to updates
2023-02-23Merge tag 'livepatching-for-6.3' of ↵Linus Torvalds1-13/+49
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching updates from Petr Mladek: - Allow reloading a livepatched module by clearing livepatch-specific relocations in the livepatch module. Otherwise, the repeated load would fail on consistency checks. * tag 'livepatching-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: livepatch,x86: Clear relocation targets on a module removal x86/module: remove unused code in __apply_relocate_add
2023-02-23Merge tag 'printk-for-6.3' of ↵Linus Torvalds3-130/+225
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Refactor printk code for formatting messages that are shown on consoles. This is a preparatory step for introducing atomic consoles which could not share the global buffers - Prevent memory leak when removing printk index in debugfs - Dump also the newest printk message by the sample gdbmacro - Fix a compiler warning * tag 'printk-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printf: fix errname.c list kernel/printk/index.c: fix memory leak with using debugfs_lookup() printk: Use scnprintf() to print the message about the dropped messages on a console printk: adjust string limit macros printk: use printk_buffers for devkmsg printk: introduce console_prepend_dropped() for dropped messages printk: introduce printk_get_next_message() and printk_message printk: introduce struct printk_buffers console: Document struct console console: Use BIT() macros for @flags values printk: move size limit macros into internal.h docs: gdbmacros: print newest record
2023-02-23Merge tag 'probes-v6.3' of ↵Linus Torvalds5-25/+21
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull kprobes updates from Masami Hiramatsu: - Skip negative return code check for snprintf in eprobe - Add recursive call test cases for kprobe unit test - Add 'char' type to probe events to show it as the character instead of value - Update kselftest kprobe-event testcase to ignore '__pfx_' symbols - Fix kselftest to check filter on eprobe event correctly - Add filter on eprobe to the README file in tracefs - Fix optprobes to check whether there is 'under unoptimizing' optprobe when optimizing another kprobe correctly - Fix optprobe to check whether there is 'under unoptimizing' optprobe when fetching the original instruction correctly - Fix optprobe to free 'forcibly unoptimized' optprobe correctly * tag 'probes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/eprobe: no need to check for negative ret value for snprintf test_kprobes: Add recursed kprobe test case tracing/probe: add a char type to show the character value of traced arguments selftests/ftrace: Fix probepoint testcase to ignore __pfx_* symbols selftests/ftrace: Fix eprobe syntax test case to check filter support tracing/eprobe: Fix to add filter on eprobe description in README file x86/kprobes: Fix arch_check_optimized_kprobe check within optimized_kprobe range x86/kprobes: Fix __recover_optprobed_insn check optimizing logic kprobes: Fix to handle forcibly unoptimized kprobes on freeing_list
2023-02-23cpufreq: schedutil: make kobj_type structure constantThomas Weißschuh1-1/+1
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.") the driver core allows the usage of const struct kobj_type. Take advantage of this to constify the structure definition to prevent modification at runtime. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-23Merge tag 'trace-v6.3' of ↵Linus Torvalds14-72/+483
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Add function names as a way to filter function addresses - Add sample module to test ftrace ops and dynamic trampolines - Allow stack traces to be passed from beginning event to end event for synthetic events. This will allow seeing the stack trace of when a task is scheduled out and recorded when it gets scheduled back in. - Add trace event helper __get_buf() to use as a temporary buffer when printing out trace event output. - Add kernel command line to create trace instances on boot up. - Add enabling of events to instances created at boot up. - Add trace_array_puts() to write into instances. - Allow boot instances to take a snapshot at the end of boot up. - Allow live patch modules to include trace events - Minor fixes and clean ups * tag 'trace-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (31 commits) tracing: Remove unnecessary NULL assignment tracepoint: Allow livepatch module add trace event tracing: Always use canonical ftrace path tracing/histogram: Fix stacktrace histogram Documententation tracing/histogram: Fix stacktrace key tracing/histogram: Fix a few problems with stacktrace variable printing tracing: Add BUILD_BUG() to make sure stacktrace fits in strings tracing/histogram: Don't use strlen to find length of stacktrace variables tracing: Allow boot instances to have snapshot buffers tracing: Add trace_array_puts() to write into instance tracing: Add enabling of events to boot instances tracing: Add creation of instances at boot command line tracing: Fix trace_event_raw_event_synth() if else statement samples: ftrace: Make some global variables static ftrace: sample: avoid open-coded 64-bit division samples: ftrace: Include the nospec-branch.h only for x86 tracing: Acquire buffer from temparary trace sequence tracing/histogram: Wrap remaining shell snippets in code blocks tracing/osnoise: No need for schedule_hrtimeout range bpf/tracing: Use stage6 of tracing to not duplicate macros ...
2023-02-23Merge tag 'trace-v6.2-rc7-3' of ↵Linus Torvalds1-32/+10
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fix from Steven Rostedt: "Fix race that causes a warning of corrupt ring buffer With the change that allows to read the "trace" file without disabling writing to the ring buffer, there was an integrity check of the ring buffer in the iterator read code, that expected the ring buffer to be write disabled. This caused the integrity check to trigger when stress reading the "trace" file while writing was happening. The integrity check is a bit aggressive (and has never triggered in practice). Change it so that it checks just the integrity of the linked pages without clearing the flags inside the pointers. This removes the warning that was being triggered" [ Heh. This was supposed to have gone in last week before the 6.2 release, but Steven forgot to actually add me to the participants of the pull request, so here it is, a week later - Linus ] * tag 'trace-v6.2-rc7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: ring-buffer: Handle race between rb_move_tail and rb_check_pages
2023-02-23irqdomain: Add missing NULL pointer check in irq_domain_create_hierarchy()Juergen Gross1-1/+2
The recent switch to per-domain locking caused a NULL dereference in irq_domain_create_hierarchy(), as Xen code is calling msi_create_irq_domain() with a NULL parent pointer. Fix that by testing parent to be set before dereferencing it. For a non-existing parent the irqdomain's root will stay to point to itself. Fixes: 9dbb8e3452ab ("irqdomain: Switch to per-domain locking") Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230223083800.31347-1-jgross@suse.com
2023-02-23Merge branch 'irq/core' into irq/urgentThomas Gleixner6-560/+470
Pull in the upstream changes so a fix for them can be applied.
2023-02-22bpf: add missing header file includeLinus Torvalds1-0/+1
Commit 74e19ef0ff80 ("uaccess: Add speculation barrier to copy_from_user()") built fine on x86-64 and arm64, and that's the extent of my local build testing. It turns out those got the <linux/nospec.h> include incidentally through other header files (<linux/kvm_host.h> in particular), but that was not true of other architectures, resulting in build errors kernel/bpf/core.c: In function ‘___bpf_prog_run’: kernel/bpf/core.c:1913:3: error: implicit declaration of function ‘barrier_nospec’ so just make sure to explicitly include the proper <linux/nospec.h> header file to make everybody see it. Fixes: 74e19ef0ff80 ("uaccess: Add speculation barrier to copy_from_user()") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Viresh Kumar <viresh.kumar@linaro.org> Reported-by: Huacai Chen <chenhuacai@loongson.cn> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-02-22swiotlb: mark swiotlb_memblock_alloc() as __initRandy Dunlap1-1/+2
swiotlb_memblock_alloc() calls memblock_alloc(), which calls (__init) memblock_alloc_try_nid(). However, swiotlb_membloc_alloc() can be marked as __init since it is only called by swiotlb_init_remap(), which is already marked as __init. This prevents a modpost build warning/error: WARNING: modpost: vmlinux.o: section mismatch in reference: swiotlb_memblock_alloc (section: .text) -> memblock_alloc_try_nid (section: .init.text) WARNING: modpost: vmlinux.o: section mismatch in reference: swiotlb_memblock_alloc (section: .text) -> memblock_alloc_try_nid (section: .init.text) This fixes the build warning/error seen on ARM64, PPC64, S390, i386, and x86_64. Fixes: 8d58aa484920 ("swiotlb: reduce the swiotlb buffer size on allocation failure") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Alexey Kardashevskiy <aik@amd.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux.dev Cc: Mike Rapoport <rppt@kernel.org> Cc: linux-mm@kvack.org Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-02-21Merge tag 'net-next-6.3' of ↵Linus Torvalds25-674/+3007
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ...
2023-02-21Merge tag 'arm64-upstream' of ↵Linus Torvalds3-6/+119
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit architectural register (ZT0, for the look-up table feature) that Linux needs to save/restore - Include TPIDR2 in the signal context and add the corresponding kselftests - Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG (ARM CMN) at probe time - Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64 - Permit EFI boot with MMU and caches on. Instead of cleaning the entire loaded kernel image to the PoC and disabling the MMU and caches before branching to the kernel bare metal entry point, leave the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of all of system RAM to populate the initial page tables - Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64 kernel (the arm32 kernel only defines the values) - Harden the arm64 shadow call stack pointer handling: stash the shadow stack pointer in the task struct on interrupt, load it directly from this structure - Signal handling cleanups to remove redundant validation of size information and avoid reading the same data from userspace twice - Refactor the hwcap macros to make use of the automatically generated ID registers. It should make new hwcaps writing less error prone - Further arm64 sysreg conversion and some fixes - arm64 kselftest fixes and improvements - Pointer authentication cleanups: don't sign leaf functions, unify asm-arch manipulation - Pseudo-NMI code generation optimisations - Minor fixes for SME and TPIDR2 handling - Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable, replace strtobool() to kstrtobool() in the cpufeature.c code, apply dynamic shadow call stack in two passes, intercept pfn changes in set_pte_at() without the required break-before-make sequence, attempt to dump all instructions on unhandled kernel faults * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (130 commits) arm64: fix .idmap.text assertion for large kernels kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests kselftest/arm64: Copy whole EXTRA context arm64: kprobes: Drop ID map text from kprobes blacklist perf: arm_spe: Print the version of SPE detected perf: arm_spe: Add support for SPEv1.2 inverted event filtering perf: Add perf_event_attr::config3 arm64/sme: Fix __finalise_el2 SMEver check drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable arm64/signal: Only read new data when parsing the ZT context arm64/signal: Only read new data when parsing the ZA context arm64/signal: Only read new data when parsing the SVE context arm64/signal: Avoid rereading context frame sizes arm64/signal: Make interface for restore_fpsimd_context() consistent arm64/signal: Remove redundant size validation from parse_user_sigframe() arm64/signal: Don't redundantly verify FPSIMD magic arm64/cpufeature: Use helper macros to specify hwcaps arm64/cpufeature: Always use symbolic name for feature value in hwcaps arm64/sysreg: Initial unsigned annotations for ID registers arm64/sysreg: Initial annotation of signed ID registers ...
2023-02-21uaccess: Add speculation barrier to copy_from_user()Dave Hansen1-2/+0
The results of "access_ok()" can be mis-speculated. The result is that you can end speculatively: if (access_ok(from, size)) // Right here even for bad from/size combinations. On first glance, it would be ideal to just add a speculation barrier to "access_ok()" so that its results can never be mis-speculated. But there are lots of system calls just doing access_ok() via "copy_to_user()" and friends (example: fstat() and friends). Those are generally not problematic because they do not _consume_ data from userspace other than the pointer. They are also very quick and common system calls that should not be needlessly slowed down. "copy_from_user()" on the other hand uses a user-controller pointer and is frequently followed up with code that might affect caches. Take something like this: if (!copy_from_user(&kernelvar, uptr, size)) do_something_with(kernelvar); If userspace passes in an evil 'uptr' that *actually* points to a kernel addresses, and then do_something_with() has cache (or other) side-effects, it could allow userspace to infer kernel data values. Add a barrier to the common copy_from_user() code to prevent mis-speculated values which happen after the copy. Also add a stub for architectures that do not define barrier_nospec(). This makes the macro usable in generic code. Since the barrier is now usable in generic code, the x86 #ifdef in the BPF code can also go away. Reported-by: Jordy Zomer <jordyzomer@google.com> Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Daniel Borkmann <daniel@iogearbox.net> # BPF bits Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-02-21sysctl: fix proc_dobool() usabilityOndrej Mosnacek1-19/+24
Currently proc_dobool expects a (bool *) in table->data, but sizeof(int) in table->maxsize, because it uses do_proc_dointvec() directly. This is unsafe for at least two reasons: 1. A sysctl table definition may use { .data = &variable, .maxsize = sizeof(variable) }, not realizing that this makes the sysctl unusable (see the Fixes: tag) and that they need to use the completely counterintuitive sizeof(int) instead. 2. proc_dobool() will currently try to parse an array of values if given .maxsize >= 2*sizeof(int), but will try to write values of type bool by offsets of sizeof(int), so it will not work correctly with neither an (int *) nor a (bool *). There is no .maxsize validation to prevent this. Fix this by: 1. Constraining proc_dobool() to allow only one value and .maxsize == sizeof(bool). 2. Wrapping the original struct ctl_table in a temporary one with .data pointing to a local int variable and .maxsize set to sizeof(int) and passing this one to proc_dointvec(), converting the value to/from bool as needed (using proc_dou8vec_minmax() as an example). 3. Extending sysctl_check_table() to enforce proc_dobool() expectations. 4. Fixing the proc_dobool() docstring (it was just copy-pasted from proc_douintvec, apparently...). 5. Converting all existing proc_dobool() users to set .maxsize to sizeof(bool) instead of sizeof(int). Fixes: 83efeeeb3d04 ("tty: Allow TIOCSTI to be disabled") Fixes: a2071573d634 ("sysctl: introduce new proc handler proc_dobool") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-02-21Merge tag 'pm-6.3-rc1' of ↵Linus Torvalds3-13/+9
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add EPP support to the AMD P-state cpufreq driver, add support for new platforms to the Intel RAPL power capping driver, intel_idle and the Qualcomm cpufreq driver, enable thermal cooling for Tegra194, drop the custom cpufreq driver for loongson1 that is not necessary any more (and the corresponding cpufreq platform device), fix assorted issues and clean up code. Specifics: - Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes Karny, Arnd Bergmann, Bagas Sanjaya) - Drop the custom cpufreq driver for loongson1 that is not necessary any more and the corresponding cpufreq platform device (Keguang Zhang) - Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig entries (Paul E. McKenney) - Enable thermal cooling for Tegra194 (Yi-Wei Wang) - Register module device table and add missing compatibles for cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss) - Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu (Christian Marangi) - Make kobj_type structure in the cpufreq core constant (Thomas Weißschuh) - Make cpufreq_unregister_driver() return void (Uwe Kleine-König) - Make the TEO cpuidle governor check CPU utilization in order to refine idle state selection (Kajetan Puchalski) - Make Kconfig select the haltpoll cpuidle governor when the haltpoll cpuidle driver is selected and replace a default_idle() call in that driver with arch_cpu_idle() to allow MWAIT to be used (Li RongQing) - Add Emerald Rapids Xeon support to the intel_idle driver (Artem Bityutskiy) - Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to avoid randconfig build failures (Arnd Bergmann) - Make kobj_type structures used in the cpuidle sysfs interface constant (Thomas Weißschuh) - Make the cpuidle driver registration code update microsecond values of idle state parameters in accordance with their nanosecond values if they are provided (Rafael Wysocki) - Make the PSCI cpuidle driver prevent topology CPUs from being suspended on PREEMPT_RT (Krzysztof Kozlowski) - Document that pm_runtime_force_suspend() cannot be used with DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald) - Add EXPORT macros for exporting PM functions from drivers (Richard Fitzgerald) - Remove /** from non-kernel-doc comments in hibernation code (Randy Dunlap) - Fix possible name leak in powercap_register_zone() (Yang Yingliang) - Add Meteor Lake and Emerald Rapids support to the intel_rapl power capping driver (Zhang Rui) - Modify the idle_inject power capping facility to support 100% idle injection (Srinivas Pandruvada) - Fix large time windows handling in the intel_rapl power capping driver (Zhang Rui) - Fix memory leaks with using debugfs_lookup() in the generic PM domains and Energy Model code (Greg Kroah-Hartman) - Add missing 'cache-unified' property in the example for kryo OPP bindings (Rob Herring) - Fix error checking in opp_migrate_dentry() (Qi Zheng) - Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad Dybcio) - Modify some power management utilities to use the canonical ftrace path (Ross Zwisler) - Correct spelling problems for Documentation/power/ as reported by codespell (Randy Dunlap)" * tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits) Documentation: amd-pstate: disambiguate user space sections cpufreq: amd-pstate: Fix invalid write to MSR_AMD_CPPC_REQ dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables PM: Add EXPORT macros for exporting PM functions cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT MIPS: loongson32: Drop obsolete cpufreq platform device powercap: intel_rapl: Fix handling for large time window cpuidle: driver: Update microsecond values of state parameters as needed cpuidle: sysfs: make kobj_type structures constant cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies PM: EM: fix memory leak with using debugfs_lookup() PM: domains: fix memory leak with using debugfs_lookup() cpufreq: Make kobj_type structure constant cpufreq: davinci: Fix clk use after free cpufreq: amd-pstate: avoid uninitialized variable use cpufreq: Make cpufreq_unregister_driver() return void OPP: fix error checking in opp_migrate_dentry() dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible ...
2023-02-21Merge tag 'seccomp-v6.3-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp update from Kees Cook: - Fix kernel-doc function name ordering to avoid warning (Randy Dunlap) * tag 'seccomp-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: fix kernel-doc function name warning
2023-02-21Merge tag 'rcu.2023.02.10a' of ↵Linus Torvalds19-404/+1012
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: - Documentation updates - Miscellaneous fixes, perhaps most notably: - Throttling callback invocation based on the number of callbacks that are now ready to invoke instead of on the total number of callbacks - Several patches that suppress false-positive boot-time diagnostics, for example, due to lockdep not yet being initialized - Make expedited RCU CPU stall warnings dump stacks of any tasks that are blocking the stalled grace period. (Normal RCU CPU stall warnings have done this for many years) - Lazy-callback fixes to avoid delays during boot, suspend, and resume. (Note that lazy callbacks must be explicitly enabled, so this should not (yet) affect production use cases) - Make kfree_rcu() and friends take advantage of polled grace periods, thus reducing memory footprint by almost two orders of magnitude, admittedly on a microbenchmark This also begins the transition from kfree_rcu(p) to kfree_rcu_mightsleep(p). This transition was motivated by bugs where kfree_rcu(p), which can block, was typed instead of the intended kfree_rcu(p, rh) - SRCU updates, perhaps most notably fixing a bug that causes SRCU to fail when booted on a system with a non-zero boot CPU. This surprising situation actually happens for kdump kernels on the powerpc architecture This also adds an srcu_down_read() and srcu_up_read(), which act like srcu_read_lock() and srcu_read_unlock(), but allow an SRCU read-side critical section to be handed off from one task to another - Clean up the now-useless SRCU Kconfig option There are a few more commits that are not yet acked or pulled into maintainer trees, and these will be in a pull request for a later merge window - RCU-tasks updates, perhaps most notably these fixes: - A strange interaction between PID-namespace unshare and the RCU-tasks grace period that results in a low-probability but very real hang - A race between an RCU tasks rude grace period on a single-CPU system and CPU-hotplug addition of the second CPU that can result in a too-short grace period - A race between shrinking RCU tasks down to a single callback list and queuing a new callback to some other CPU, but where that queuing is delayed for more than an RCU grace period. This can result in that callback being stranded on the non-boot CPU - Torture-test updates and fixes - Torture-test scripting updates and fixes - Provide additional RCU CPU stall-warning information in kernels built with CONFIG_RCU_CPU_STALL_CPUTIME=y, and restore the full five-minute timeout limit for expedited RCU CPU stall warnings * tag 'rcu.2023.02.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (80 commits) rcu/kvfree: Add kvfree_rcu_mightsleep() and kfree_rcu_mightsleep() kernel/notifier: Remove CONFIG_SRCU init: Remove "select SRCU" fs/quota: Remove "select SRCU" fs/notify: Remove "select SRCU" fs/btrfs: Remove "select SRCU" fs: Remove CONFIG_SRCU drivers/pci/controller: Remove "select SRCU" drivers/net: Remove "select SRCU" drivers/md: Remove "select SRCU" drivers/hwtracing/stm: Remove "select SRCU" drivers/dax: Remove "select SRCU" drivers/base: Remove CONFIG_SRCU rcu: Disable laziness if lazy-tracking says so rcu: Track laziness during boot and suspend rcu: Remove redundant call to rcu_boost_kthread_setaffinity() rcu: Allow up to five minutes expedited RCU CPU stall-warning timeouts rcu: Align the output of RCU CPU stall warning messages rcu: Add RCU stall diagnosis information sched: Add helper nr_context_switches_cpu() ...
2023-02-21Merge tag 'cgroup-for-6.3' of ↵Linus Torvalds1-7/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "All the changes are trivial: documentation updates and a trivial code cleanup" * tag 'cgroup-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup/cpuset: fix a few kernel-doc warnings & coding style docs: cgroup-v1: use numbered lists for user interface setup docs: cgroup-v1: add internal cross-references docs: cgroup-v1: make swap extension subsections subsections docs: cgroup-v1: use bullet lists for list of stat file tables docs: cgroup-v1: move hierarchy of accounting caption docs: cgroup-v1: fix footnotes docs: cgroup-v1: use code block for locking order schema docs: cgroup-v1: wrap remaining admonitions in admonition blocks docs: cgroup-v1: replace custom note constructs with appropriate admonition blocks cgroup/cpuset: no need to explicitly init a global static variable
2023-02-21Merge tag 'wq-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds1-71/+209
Pull workqueue updates from Tejun Heo: - When per-cpu workqueue workers expire after sitting idle for too long, they used to wake up to the CPU that they're bound to in order to exit. This unfortunately could cause unwanted disturbances on CPUs isolated for e.g. RT applications. The worker exit path is restructured so that an existing worker is unbound from its CPU before being woken up for the last time, allowing it to migrate away from an isolated CPU for exiting. - A couple debug improvements. Watchdog dump is made more compact and workqueue now warns if used-after-free during the RCU grace period after destroy_workqueue(). * tag 'wq-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Fold rebind_worker() within rebind_workers() workqueue: Unbind kworkers before sending them to exit() workqueue: Don't hold any lock while rcuwait'ing for !POOL_MANAGER_ACTIVE workqueue: Convert the idle_timer to a timer + work_struct workqueue: Factorize unbind/rebind_workers() logic workqueue: Protects wq_unbound_cpumask with wq_pool_attach_mutex workqueue: Make show_pwq() use run-length encoding workqueue: Add a new flag to spot the potential UAF error

Privacy Policy